AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6P2091 FILTER GP-TRANSMISSION PART OF 8P5956 TRANSMISSION ARRANGEMENT SHOWN ON PAGE 148 130G MOTOR GRADER


POWER TRAIN
FILTER GP
OPERATOR STATION
CONTROL GP
POWER TRAIN
DIFFERENTIAL & BEVEL GEAR GP
CONTROL GP-DIFFERENTIAL LOCK
DIFFERENTIAL & BEVEL GEAR GP
DRIVE GP-FINAL

MOTOR GRADER 130G MOTOR GRADER 74V
 130G MOTOR GRADER 74V02059-02320 (MACHINE) POWERED BY 3304 ENGINE SEBP1428 130G 74V   (1975)

POWER TRAIN

FILTER GP
FILTER GP-TRANSMISSION
6P-2091 FILTER GP-TRANSMISSION
 

#SEBP14280330
 

6P-2091: FILTER GP-TRANSMISSION

6P2091 FILTER GP-TRANSMISSION
PART OF 8P5956 TRANSMISSION ARRANGEMENT SHOWN ON PAGE 148
c351066 SEBP1428
6P2091 FILTER GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-8008 [1] PLUG-O-RING  
  3D-2824 [1] SEAL-O-RING  
2. 3T-0688 C [1] SPOOL  
3. 9M-1986 C [1] SPRING  
4. 9S-4191 C [1] PLUG-O-RING  
5. 6P-2090 [1] BASE-TRANSMISSION OIL FILTER  
6. 9M-9740 [1] ELEMENT-FILTER  
    -OR-
  4T-3131 CA [1] ELEMENT (FOR USE WITH FIRE  
    RESISTANT HYD SYSTEM)
7. 3S-8652 [1] SPRING  
8. 7S-6745 [1] RETAINER  
9. 2J-6356 [1] RING-RETAINING  
10. 3P-0887 [1] HOUSING AS  
11. 2S-8439 [1] SEAL-O-RING  
12. 9S-8004 C [1] PLUG-O-RING  
13. 3J-1907 [2] SEAL  
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14280331
 

8D-5195: CONTROL GP-CLUTCH

8D5195 CLUTCH CONTROL GROUP
c233108 SEBP1428
8D5195 CONTROL GP-CLUTCH Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-2029 [4] BOLT  
2. 5M-2894 C [10] WASHER  
3. 4F-7957 [1] BOLT  
  1H-3244 [1] LOCKWASHER  
4. 9D-0001 [1] LEVER  
  3B-1915 [1] BOLT  
5. 7D-9316 [1] SHAFT  
6. 7K-2135 [1] BEARING  
7. 1B-8704 [2] KEY  
8. 4J-2667 [1] BEARING  
9. 6G-5058 C [1] PEDAL  
  0S-1571 [1] BOLT  
  1D-4717 [1] NUT  
10. 6G-5059 C [1] TREAD  
11. 0S-1591 C [2] BOLT  
12. 4B-3611 [1] SCREW  
13. 1B-2578 [1] NUT  
14. 6L-7751 [1] END  
15. 1B-4201 [2] NUT  
16. 9D-0669 [1] HOUSING  
17. 0S-0509 [4] BOLT  
18. 9D-0669 [1] GASKET  
19. 9D-0698 [1] COVER  
20. 6F-0253 [1] LOCKWASHER  
21. 9S-1354 [3] NUT  
22. 9D-5506 [1] END  
23. 8D-5295 [1] PIN  
  8D-5294 [1] RING  
24. 8D-5296 [1] COUPLING  
25. 3D-2992 [1] SEAL  
26. 8D-5293 [2] RING  
27. 1P-8116 [1] SEAL  
28. 8D-5287 [1] CABLE  
29. 0S-1616 [1] BOLT  
  1B-4330 [2] NUT  
30. 9D-2641 [1] SPRING  
31. 3S-2093 [1] STRAP  
  C   INDICATES CHANGE
 

#SEBP14280332
 

6G-5447: LOCK AR-DIFFERENTIAL

6G5447 DIFFERENTIAL LOCK ARRANGEMENT
AN ATTACHMENT
SEBP14280332 SEBP1428
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  2G-6010 Y [1] DIFFERENTIAL AND BEVEL GEAR GROUP  
   
  6G-5220 Y [1] DIFFERENTIAL LOCK CONTROL GROUP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP14280333
 

6G-5220: CONTROL GP-DIFFERENTIAL LOCK

6G5220 DIFFERENTIAL LOCK CONTROL GROUP
7N8000-PAGE 142B
AN ATTACHMENT
c327139 SEBP1428
6G5220 CONTROL GP-DIFFERENTIAL LOCK Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5D-9522 [1] UNION  
  3J-1907 [1] SEAL  
2. 5D-5886 [1] HOSE AS.  
3. 7N-5876 [1] LAMP  
4. 7N-8000 Y [1] SWITCH AS.  
5. 9M-8406 [1] CLIP  
6. 2G-8990 [1] VALVE GROUP (SOLENOID)  
  6G-5978 C [1] CARTRIDGE  
  2G-8921 [1] COIL  
7. 8M-4438 [2] SEAL  
8. 9S-4182 [1] PLUG  
9. 3J-7354 [1] SEAL  
10. 0S-1590 [2] BOLT  
11. 5M-2894 [2] WASHER  
12. 5D-7377 [1] FITTING  
  3J-7354 [1] SEAL  
13. 2G-8922 [1] CAP  
14. 2G-8931 [1] WIRE AS.  
  5P-5623 BD WIRE (16 GAUGE)  
15. 5P-5610 [1] CONNECTOR  
16. 2L-8075 [1] TERMINAL (NO. 8 SCREW)  
17. 7N-8597 [2] TERMINAL  
18. 5H-6555 [2] LOCKWASHER  
19. 3K-8782 C [1] FUSE (10 AMP)  
    THE FOLLOWING REPAIR KIT IS AVAILABLE:
  6G-5979 C [1] KIT (CARTRIDGE SEAL)  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
  D   ORDER BY THE METER
 

#SEBP14280334
 

2G-5885: GEAR GP-BEVEL

2G5885 BEVEL GEAR GROUP-PART 1 OF 2
c330746 SEBP1428
2G5885 GEAR GP-BEVEL Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-4571 [1] SEAL-O-RING  
2. 1A-8537 [18] BOLT  
  4D-3704 [18] WASHER-HARD  
3. 6G-4703 C [1] NUT  
4. 030-0060 [1] CUP-ROLLER BEARING  
  030-0061 [1] CONE-ROLLER BEARING  
5. 8D-8197 [1] CAGE  
6. 8D-8196 [1] PLATE  
7. 8D-9784 C [2] LOCK  
8. 030-8535 C [2] BOLT-SELF LOCKING  
  5M-2894 C [2] WASHER  
9. 9D-4454 [1] HUB  
10. 2G-5768 [1] GEAR-BEVEL RING (58 TEETH)  
11. 8D-8199 [1] HUB  
12. 8M-8283 [3] SEAL-O-RING  
13. 6F-0698 [2] PIN-DOWEL  
14. 1P-2662 [1] CONE-ROLLER BEARING  
  1P-2636 [1] CUP-ROLLER BEARING  
15. 6G-4701 C [1] NUT  
16. 8D-4313 [1] CAGE  
   
   
   
   
   
17. 7F-8268 [1] SEAL-O-RING 53.57MM(2.109IN)ID  
  4F-8946 [1] SEAL-O-RING 26.57MM(1.046IN)ID  
  4F-7952 [1] SEAL-O-RING 37.70MM(1.484IN)ID  
18. 0S-1594 [2] BOLT  
  5M-2894 C [2] WASHER  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14280335
 

2G-5885: GEAR GP-BEVEL

2G5885 GEAR GP-BEVEL-PART 2 OF 2
c402305 SEBP1428
2G5885 GEAR GP-BEVEL Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-4570 [1] CARRIER AS-DIFFERENTIAL  
2. 3D-2088 [4] STUD-TAPERLOCK  
  6B-6682 [4] NUT-FULL  
3. 8D-4556 [1] TUBE  
4. 3D-8439 [10] STUD  
5. 8D-4323 [1] TUBE  
6. 2G-1314 [2] SLEEVE  
7. 5P-8248 [4] WASHER-HARD  
8. 8D-4561 [1] PLATE AS  
9. 0L-1351 [2] BOLT  
  8M-7640 [2] LOCK  
    - OR -
  030-8535 C [2] BOLT-SELF LOCKING  
  5M-2894 C [2] WASHER  
10. 1P-2697 [1] CUP-BEARING  
  1P-2696 [1] CONE-BEARING  
11. 2H-3911 [1] SEAL-LIP TYPE  
12. 1D-4720 [21] NUT (FULL)  
  2S-5658 [21] WASHER-HARD  
13. 6B-5262 [1] PLUG-DRAIN  
  2A-3398 [1] GASKET  
14. 7D-8348 [1] CUP-ROLLER BEARING  
  7D-8349 [1] CONE-ROLLER BEARING  
15. 2S-8439 [1] SEAL-O-RING  
16. [1] SHAFT-BEVEL PINION  
   
17. 5P-5813 [1] NUT-BEARING LOCK  
  9B-0143 [1] LOCK-NUT  
  7D-8347 [1] WASHER  
18. 4D-1577 [1] SEAL-O-RING  
19. 8M-4990 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14280336
 

2G-6010: DIFFERENTIAL & BEVEL GEAR GP

2G6010 DIFFERENTIAL AND BEVEL GEAR GROUP-PART 1 OF 2
2G6020-PAGE 176
AN ATTACHMENT
c330996 SEBP1428
2G6010 DIFFERENTIAL & BEVEL GEAR GP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-4571 [1] SEAL  
2. 9D-8799 [1] RING  
  2S-1914 [1] SEAL  
3. 6G-4703 C [1] NUT  
4. 030-0060 [1] CUP  
  030-0061 [1] CONE  
5. 8D-7682 [1] CAGE ASSEM.  
6. 2D-6642 [1] BALL  
7. 8D-9784 C [2] LOCK  
8. 030-8535 C [2] BOLT  
  5M-2894 C [2] WASHER  
9. 9D-6115 [1] RING  
10. 9D-2689 C [2] RING  
11. 2G-6020 Y [1] DIFFERENTIAL GROUP  
12. 9F-2247 C [1] PLUG  
13. 6F-0698 [1] DOWEL  
14. 1P-2662 [1] CONE  
  1P-2636 [1] CUP  
15. 6G-4701 C [1] NUT  
16. 8D-4313 [1] CAGE  
17. 7F-8268 [1] SEAL 2.109 IN. (5.36CM) I.D.  
  4F-8946 [1] SEAL 1.046 IN. (2.66CM) I.D.  
  4F-7952 [1] SEAL 1.484 IN. (3.77CM) I.D.  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14280337
 

2G-6010: DIFFERENTIAL & BEVEL GEAR GP

2G6010 BEVEL GEAR & DIFFERENTIAL GP-PART 2 OF 2
AN ATTACHMENT
c402983 SEBP1428
2G6010 DIFFERENTIAL & BEVEL GEAR GP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-4570 [1] CARRIER AS-DIFFERENTIAL  
2. 3D-2088 [4] STUD-TAPERLOCK  
  6B-6682 [4] NUT-FULL  
3. 8D-4556 [1] TUBE  
4. 3D-8439 [10] STUD  
5. 8D-4323 [1] TUBE  
6. 2G-1314 [2] SLEEVE  
7. 5P-8248 [4] WASHER-HARD  
8. 8D-4561 [1] PLATE AS  
9. 0L-1351 [2] BOLT  
  8M-7640 [2] LOCK  
    - OR -
  030-8535 C [2] BOLT-SELF LOCKING  
  5M-2894 C [2] WASHER  
10. 1P-2697 [1] CUP-BEARING  
  1P-2696 [1] CONE-BEARING  
11. 2H-3911 [1] SEAL-LIP TYPE  
12. 1D-4720 [21] NUT (FULL)  
  3B-4510 [21] LOCKWASHER  
13. 6B-5262 [1] PLUG-DRAIN  
  2A-3398 [1] GASKET  
14. 7D-8348 [1] CUP-ROLLER BEARING  
  7D-8349 [1] CONE-ROLLER BEARING  
15. 2S-8439 [1] SEAL-O-RING  
16. [1] SHAFT-BEVEL PINION  
   
17. 5P-5813 [1] NUT-BEARING LOCK  
  9B-0143 [1] LOCK-NUT  
  7D-8347 [1] WASHER  
18. 4D-1577 [1] SEAL-O-RING  
19. 8M-4990 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14280338
 

2G-6020: DIFFERENTIAL GP

2G6020 DIFFERENTIAL GROUP
PART OF 2G6010 DIFFERENTIAL AND BEVEL GEAR GROUP SHOWN ON PAGE 174
AN ATTACHMENT
c524737 SEBP1428
2G6020 DIFFERENTIAL GP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-9471 [1] GEAR-DIFFERENTIAL BEVEL (24 TEETH)  
2. 8D-4064 [2] WASHER-THRUST  
3. 8D-4528 [1] SPIDER  
4. 8D-4065 [4] WASHER-THRUST  
5. 8D-4282 [1] DISC  
6. 2G-5768 [1] GEAR-BEVEL RING (58 TEETH)  
7. 8D-7694 [1] HOUSING AS  
  2D-6642 [1] BALL  
8. 3D-6509 [2] DOWEL  
9. 7D-8225 [1] SEAL-RING  
10. 8D-4291 [1] PISTON  
11. 7D-8226 [1] SEAL-RING  
12. 6Y-7954 [7] DISC-FRICTION  
13. 7D-8185 [8] DISC  
14. 8D-9472 [1] GEAR-DIFFERENTIAL BEVEL (24 TEETH)  
15. 1A-8537 [18] BOLT  
  4D-3704 [18] WASHER-HARD  
16. 8D-9460 [4] PINION AS-BEVEL  
17. 8D-4072 [1] BEARING (SLEEVE)  
18. 9D-8972 [1] HOUSING AS-DIFFERENTIAL  
19. 9F-2491 [8] BOLT  
  4S-9191 [8] WASHER  
20. 3D-6509 [6] DOWEL  
 

#SEBP14280339
 

8D-4030: FINAL DRIVE GP

8D4030 FINAL DRIVE GROUP
SERIAL NO. 74V2059 TO 74V2064 INCLUSIVE
c227991 SEBP1428
8D4030 FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-3958 [2] SHAFT ASSEM.  
    (Each Includes)
2. 8D-3957 [1] WASHER  
3. 8D-3877 [2] GEAR (18 teeth)  
4. 8D-3591 [2] CARRIER  
5. 0S-0509 [16] BOLT  
  2S-0607 [8] LOCK  
  7D-0035 [8] PLATE  
6. 7D-7889 [2] GEAR (72 teeth)  
7. 2J-3506 [38] NUT  
  2S-0115 [38] WASHER  
8. 1P-4693 [4] CUP  
9. 1P-4694 [2] CONE  
10. 8D-3744 [2] SHAFT  
11. 4K-0367 [36] NUT  
12. 4D-6695 [2] SEAL  
13. 8D-3902 [2] SEAL  
14. 8D-3743 [4] SPROCKET  
15. 0S-1591 [10] BOLT  
  0L-0364 [10] LOCK  
16. 8D-3540 [2] NUT  
17. 1H-9696 [2] SEAL  
18. 8D-8159 [2] RETAINER  
19. 5P-3490 [2] CONE  
20. 8S-9092 [32] BOLT  
21. 6G-1953 C [2] RETAINER  
22. 6G-3206 C [4] WASHER  
23. 6G-3283 C [2] HOUSING  
24. 8D-3949 [4] RING  
25. 6G-6242 C [2] SEAL  
26. 6G-1967 C [2] HOUSING  
27. 7S-4571 [2] SEAL  
28. 0S-1594 [12] BOLT  
  1A-5823 [6] LOCK  
29. 7D-0028 [6] RETAINER  
30. 7D-8346 [6] GEAR (26 teeth)  
31. 1S-9110 [12] BEARING  
32. 2G-6786 [6] SHAFT  
33. 8D-3885 [2] WASHER  
34. 8D-9076 [12] WASHER  
35. 8D-3886 [2] RING  
36. 4D-3704 [68] WASHER  
37. 6G-3212 C [2] SHIM PACK .95 mm(.037 in.) thick  
  C   INDICATES CHANGE
 

Information:

Service Magazine
Color Coded Dust Caps for S·O·S Ports Will Be Available {7770}
2003/12/01
Optional High Efficiency Filters Are Now Available {3004, 5068}
2003/07/07
Understanding Transmission Filter Plugging Events {3004, 3067}
2007/04/02

Caterpillar Parts SIS Catalog 130G :

ADAPTER GP-ENGINE TO TMSN
9D-9860 ADAPTER GP-ENGINE TO TMSN
COVER GP-PROTECTION
6G-9000 COVER GP-PROTECTION
FILLER GP-TRANSMISSION OIL
2G-2440 FILLER GP-TRANSMISSION OIL
COVER GP-PROTECTION
6G-9005 COVER GP-PROTECTION
PUMP GP-TRANSMISSION
3P-0892 PUMP GP-TRANSMISSION
PUMP GP-TRANSMISSION
3P-0891 PUMP GP-TRANSMISSION
LINES GP-POWER TRAIN OIL
3P-0757 LINES GP-POWER TRAIN OIL
VALVE GP-SELECTOR & PRESS CONT
8P-1101 VALVE GP-SELECTOR & PRESS CONT
CONTROL GP-CLUTCH
8D-5195 CONTROL GP-CLUTCH
6G-5447 LOCK AR-DIFFERENTIAL
CONTROL GP-DIFFERENTIAL LOCK
6G-5220 CONTROL GP-DIFFERENTIAL LOCK
GEAR GP-BEVEL
2G-5885 GEAR GP-BEVEL
2G-5885 GEAR GP-BEVEL
DIFFERENTIAL & BEVEL GEAR GP
2G-6010 DIFFERENTIAL & BEVEL GEAR GP
2G-6010 DIFFERENTIAL & BEVEL GEAR GP
DIFFERENTIAL GP
2G-6020 DIFFERENTIAL GP

Truck sale:

Caterpillar 130G
 
Caterpillar 130G
- motor graders
PETERSON CAT
 
28.500 
Caterpillar 130G, bergbau-motorgrader, Bau-Und Bergbauausrüstung


Caterpillar 130G, Construction
34,000 
Caterpillar 130G, Construction
- motor graders
PETERSON CAT
 
55,000 
Caterpillar HM 329130G, Construction
- hammer
WHEELER MACHINERY CO.
Caterpillar 130G, Construction
37,883 
Caterpillar 130G, Construction
- motor graders
EMPIRE MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.