IMPLEMENTS
CIRCLE GPFRAME AND BODY
FRAME GPCASE & FRAME GP
BUMPER GP
HITCH GP
AXLE GP
IMPLEMENTS
CIRCLE GP
#SEBP14280400
9D-6505: CIRCLE GP
9D6505 CIRCLE GP-POWER BLADE & TIP-TYPE 3
6G2900-PAGE 210
PART OF 2G0440 & 2G6322 POWER BLADE AND TIP
AN ATTACHMENT
6G2900-PAGE 210
PART OF 2G0440 & 2G6322 POWER BLADE AND TIP
AN ATTACHMENT
For full view, you need register
Parts for your 130G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 0S-1619 | [2] | BOLT | |
| 8T-4896 C | [2] | WASHER-HARD | ||
| 2. | 6G-2900 Y | [1] | CIRCLE AS | |
| 3. | 9S-1366 | [2] | BOLT | |
| 1H-7855 | [2] | SPACER (LARGE) | ||
| 8F-4028 | [2] | SPACER (SMALL) | ||
| 4. | 5P-8245 | [34] | WASHER | |
| 5. | 4B-5273 | [6] | WASHER | |
| 6. | 8D-5862 | [1] | GUARD AS | |
| 7. | 6H-1717 | [32] | BOLT 2.86CM(1.125IN)LG. | |
| 8. | 5T-8366 | [4] | STRIP-WEAR (END) | |
| 5T-8367 | [1] | STRIP-WEAR (CENTER) | ||
| 9. | 8W-1751 | [1] | BRACKET AS | |
| 10. | 8S-9092 | [2] | BOLT (SHORT) | |
| 1A-8537 | [2] | BOLT (LONG) | ||
| 5P-8247 | [4] | WASHER-HARD | ||
| 11. | 5D-6644 | [10] | SHIM .762MM(.029IN)THK | |
| 12. | 8D-5863 | [1] | GUARD AS | |
| 13. | 8W-1749 | [10] | PLATE | |
| 14. | 8D-5949 | [1] | BAR-SPREADER | |
| 15. | 2G-3221 | [5] | SHIM 1.6MM(.062IN)THK .15CM(.06IN.)THK. | |
| 16. | 7F-0482 | [4] | NUT-FULL | |
| 17. | 3B-4647 | [2] | PIN-COTTER | |
| 18. | 2B-2673 | [2] | NUT | |
| 1D-0503 | [2] | WASHER | ||
| 19. | 8W-4066 C | [1] | BRACKET-RAIL (R.H.) | |
| 8W-4067 C | [1] | BRACKET-RAIL (L.H.) | ||
| 20. | 2G-3219 B | [5] | SHIM .80MM(.031IN)THK .76MM(.03IN)THK | |
| 21. | 6G-2947 | [1] | SHAFT | |
| 22. | 2K-0419 B | [4] | WASHER | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP14280401
9D-6375: CIRCLE GP
For full view, you need register
Parts for your 130G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6G-2940 | [1] | CIRCLE ASSEM. | |
| (Includes) | ||||
| 4D-4375 | [2] | LUG | ||
| 2. | 6G-2949 | [1] | BRACE | |
| 3. | 9D-2185 | [2] | SHIM 2.54 mm(.1 in.)thick | |
| 9D-2186 | [2] | SHIM 1.27 mm(.05 in.)thick | ||
| 8D-3093 | [2] | SPACER (tapered) | ||
| 4. | 7B-5037 | [2] | LOCK | |
| 5. | 9S-1366 | [2] | BOLT | |
| 4B-5273 | [4] | WASHER 2.77 mm(.109 in.) thick | ||
| 8F-4028 | [2] | SPACER 6.35 mm(.25 in.) thick | ||
| 1H-7855 | [2] | SPACER 35.1 mm(1.38 in.) thick | ||
| 6. | 3B-4508 | [34] | LOCKWASHER | |
| 7. | 8D-2451 | [1] | GUARD ASSEM. | |
| (Includes) | ||||
| 1K-6928 | [2] | PIN | ||
| 8. | 5D-0134 | [4] | STRIP | |
| 9. | 2G-3221 | [4] | SHIM | |
| 10. | 2B-2673 | [2] | NUT | |
| 1D-0503 | [2] | WASHER | ||
| 11. | 3B-4647 | [2] | COTTER PIN | |
| 12. | 6G-9424 C | [1] | BRACKET (L.H.) | |
| 6G-9425 C | [1] | BRACKET (L.H.) | ||
| 13. | 1D-4642 | [2] | BOLT | |
| 6K-3632 | [2] | LOCKNUT | ||
| 8D-5467 | [2] | WASHER 18.26 mm(.72 in.)thick | ||
| 5D-5206 | [2] | WASHER 12.7mm(.5 in.) thick | ||
| 14. | 6H-1717 | [32] | BOLT | |
| 15. | 6D-5415 | [8] | PLATE | |
| 16. | 7F-0482 | [4] | NUT | |
| 17. | 7D-7095 | [1] | BAR | |
| 18. | 6G-2947 | [1] | SHAFT | |
| 19. | 2K-0419 CB | [4] | WASHER 1.59mm (.065 in.) thick | |
| 6G-3044 H | [1] | SEGMENT (circle gear) | ||
| (7 teeth not shown service repair for worn or damaged teeth) | ||||
| B | USE AS REQUIRED | |||
| H | NOT PART OF 9D6375 POWER BLADE CIRCLE GROUP | |||
| C | INDICATES CHANGE | |||
#SEBP14280402
9D-6375: CIRCLE GP
9D6375 POWER BLADE CIRCLE GROUP - TYPE 2
PART OF 2G6317 POWER BLADE ARRANGEMENT
AN ATTACHMENT
PART OF 2G6317 POWER BLADE ARRANGEMENT
AN ATTACHMENT
For full view, you need register
Parts for your 130G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6G-2940 | [1] | CIRCLE AS | |
| 4D-4375 | [2] | LUG | ||
| 2. | 6G-2949 | [1] | BRACE | |
| 3. | 8W-2225 C | [1] | BEAM-BLADE | |
| 4. | 7B-5037 | [2] | LOCK-BOLT | |
| 5. | 8W-2224 C | [1] | BEAM-BLADE | |
| 6. | 5P-8245 C | [26] | WASHER | |
| 7. | 8D-2451 | [1] | GUARD AS | |
| 1K-6928 | [2] | PIN | ||
| 8. | 5T-8366 C | [4] | STRIP-WEAR | |
| 9. | 2G-3221 | [4] | SHIM 1.6MM(.062IN)THK | |
| 10. | 2B-2673 | [2] | NUT | |
| 1D-0503 | [2] | WASHER | ||
| 11. | 3B-4647 | [2] | PIN-COTTER | |
| 12. | 8W-1752 C | [1] | BRACKET-RAIL (L.H.) | |
| 8W-1753 C | [1] | BRACKET-RAIL (R.H.) | ||
| 13. | 1D-4642 | [2] | BOLT | |
| 6K-3632 | [2] | LOCKNUT | ||
| 8D-5467 | [2] | WASHER-NOTCHED 1.82CM(.72IN)THK | ||
| 5D-5206 | [2] | WASHER-NOTCHED 1.27CM(.5IN)THK | ||
| 14. | 6H-1717 C | [24] | BOLT | |
| 15. | 8W-1749 C | [8] | PLATE | |
| 16. | 7F-0482 | [4] | NUT-FULL | |
| 17. | 7D-7095 | [1] | BAR-SPREADER | |
| 18. | 6G-2947 | [1] | SHAFT | |
| 19. | 2K-0419 B | [4] | WASHER .159CM(.065IN)THK | |
| 20. | 9S-1366 | [2] | BOLT | |
| 4B-5273 | [4] | WASHER .27CM(.109IN)THK | ||
| 8F-4028 | [2] | SPACER .63CM(.25IN)THK | ||
| 1H-7855 | [2] | SPACER 3.51CM(1.38IN)THK | ||
| 21. | 2G-3219 CB | [4] | SHIM .80MM(.031IN)THK | |
| 6G-3044 AF | [1] | SEGMENT-CIRCLE GEAR | ||
| (7 TEETH-SERVICE | ||||
| REPAIR FOR WORN | ||||
| OR DAMAGED TEETH) | ||||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
#SEBP14280403
6G-5350: FRAME GP-FRONT
6G5350 FRAME GP-FRONT
S/N 74V2059-2259
S/N 74V2059-2259
For full view, you need register
Parts for your 130G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9D-9257 | [1] | PIN | |
| 2. | 8D-3791 | [1] | COTTER PIN | |
| 3. | 0S-1594 | [4] | BOLT | |
| 4. | 7K-4743 | [7] | WASHER | |
| 5. | 8D-8168 | [4] | BEARING | |
| 6. | 9D-6585 | [8] | SEAL | |
| 7. | 6G-1285 | [1] | COVER (L.H.) | |
| 8. | 6G-1284 | [1] | COVER (R.H.) | |
| 9. | 9D-8838 | [2] | COVER | |
| 10. | 0S-0509 | [15] | BOLT | |
| 11. | 2G-8717 | [1] | COVER ASSEM. (R.H.) | |
| 2G-6781 | [1] | COVER ASSEM (L.H.) | ||
| 12. | 9D-1377 | [5] | BUSHING | |
| 9D-1376 | [15] | SHIM .635mm(.025 in.)thick | ||
| 9D-1374 | [20] | SHIM .381 mm(.015 in.)thick | ||
| 8F-6518 | [5] | RING | ||
| 13. | 6G-5336 | [1] | FRAME ASSEM. | |
| (Includes) | ||||
| 14. | 4D-9376 | [2] | BOSS | |
| 15. | 5F-7845 | [3] | BOSS | |
| 16. | 2G-5611 | [2] | PIPE | |
| 17. | 9D-3807 | [2] | STOP | |
| 18. | 9D-5659 | [11] | BOSS | |
| 19. | 8F-9836 | [1] | LUG | |
| 20. | 6J-0499 | [6] | LUG | |
| 21. | 2M-2835 | [2] | BLOCK | |
| 22. | 8D-8879 | [4] | STUD | |
| 23. | 1H-8942 | [1] | PLATE | |
| 24. | 5M-2894 | [19] | WASHER (plain) | |
| 25. | 6G-2526 | [1] | PLATE | |
| 3K-5574 | [2] | SCREW | ||
#SEBP14280404
6G-5350: FRAME GP-FRONT
6G5350 FRAME GP-FRONT
S/N 74V2260-UP
S/N 74V2260-UP
For full view, you need register
Parts for your 130G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9D-9257 | [1] | PIN | |
| 2. | 8D-3791 | [1] | PIN | |
| 3. | 4L-6454 C | [4] | BOLT | |
| 4. | 7K-4743 | [7] | WASHER -LARGE | |
| 5. | 8D-8168 | [4] | BEARING | |
| 6. | 9D-6585 | [8] | SEAL-LIP TYPE | |
| 7. | 6G-1285 | [1] | COVER -L.H. | |
| 8. | 6G-1284 | [1] | COVER -R.H. | |
| 9. | 9D-8838 | [2] | COVER | |
| 10. | 5M-3062 C | [15] | BOLT | |
| 11. | 2G-8715 C | [2] | COVER | |
| 12. | 9D-1377 | [5] | BUSHING | |
| 13. | 8W-2176 C | [1] | FRAME AS | |
| 14. | 8T-4896 C | [19] | WASHER-HARD -SMALL | |
| 15. | 6G-2526 | [1] | PLATE | |
| 3K-5574 | [2] | SCREW-HOLLOW | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP14280405
8D-3680: CASE & FRAME GP
8D3680 FRAME & CASE GP
For full view, you need register
Parts for your 130G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9F-2978 | [2] | NUT-WELD | |
| 2. | 4D-8148 | [1] | DOWEL | |
| 3. | 6B-5262 | [1] | PLUG-DRAIN | |
| 2A-3398 | [1] | GASKET | ||
| 4. | 2R-1600 C | [38] | STUD-TAPERLOCK | |
| 5. | 2D-8822 | [11] | STUD-TAPERLOCK | |
| 6. | 2G-9707 C | [1] | CASE AS-FRAME | |
| 7. | 8F-9836 | [3] | LUG | |
| 8. | 8D-3508 C | [11] | BOSS | |
| 9. | 3H-4776 | [1] | BOSS | |
| 10. | 7F-3206 | [2] | LUG | |
| 11. | 4J-5519 | [4] | BLOCK | |
| 12. | 7T-1099 C | [2] | LINK | |
| 13. | 9K-3050 C | [2] | STUD-WELD | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP14280406
2G-9760: CASE & FRAME GP
2G9760 FRAME & CASE GP
PART OF 2G9866, 2G2590 & 5T4166 SOUND SUPPRESSION,
2G9795 & 2G9785 BOTTOM GUARD.
AN ATTACHMENT
PART OF 2G9866, 2G2590 & 5T4166 SOUND SUPPRESSION,
2G9795 & 2G9785 BOTTOM GUARD.
AN ATTACHMENT
For full view, you need register
Parts for your 130G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2G-9708 | [1] | FRAME & CASE AS | |
| 2. | 2G-9077 | [4] | PLATE | |
| 3. | 3H-4776 | [1] | BOSS | |
| 4. | 8F-9836 | [3] | LUG | |
| 5. | 4J-5519 | [3] | BLOCK | |
| 6. | 7F-3206 | [4] | LUG | |
| 7. | 8D-3508 C | [11] | BOSS | |
| 8. | 1K-2728 | [10] | WASHER-RETAINING | |
| 9. | 4D-8148 | [1] | DOWEL | |
| 10. | 6B-5262 | [1] | PLUG-DRAIN | |
| 2A-3398 | [1] | GASKET | ||
| 11. | 2R-1600 C | [38] | STUD-TAPERLOCK | |
| 12. | 2D-8822 | [11] | STUD-TAPERLOCK | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP14280407
7D-9640: BUMPER GP-REAR
7D9640 BUMPER GP-REAR
For full view, you need register
#SEBP14280408
8D-2370: HITCH GP-ARTICULATED
8D2370 HITCH GP-ARTICULATED
For full view, you need register
Parts for your 130G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2B-0947 | [4] | BOLT | |
| 2. | 5P-8245 C | [19] | WASHER | |
| 3. | 0S-1587 | [2] | BOLT | |
| 4. | 5B-9916 | [1] | FITTING-HYDRAULIC | |
| 5. | 6G-0417 | [1] | COVER | |
| 6. | 2V-4331 | [1] | COLLAR | |
| 7. | 5K-0984 | [1] | BEARING-SLEEVE | |
| 8. | 6G-0607 | [1] | PIN | |
| 9. | 5K-0983 | [2] | SEAL-LIP TYPE | |
| 10. | 5K-0871 | [1] | PIN-LOWER | |
| 11. | 5K-0987 | [1] | SPACER | |
| 12. | 5K-0989 | [1] | CAP-UPPER | |
| 13. | 2D-4867 | [1] | FITTING-HYDRAULIC | |
| 14. | 5K-0988 | [1] | SHIM-PACK | |
| 15. | 5K-0985 | [1] | BEARING AS-ROLLER | |
| 16. | 5K-0991 | [1] | CAP-LOWER | |
| 17. | 1D-4569 | [7] | BOLT | |
| 18. | 7B-3235 | [6] | BOLT | |
| 19. | 4V-0015 | [1] | PLATE-LOCK | |
| 20. | 0S-1589 | [4] | BOLT | |
| 3B-4510 | [4] | LOCKWASHER | ||
| 21. | 4K-6781 | [1] | SPACER | |
| 22. | 4K-7464 | [1] | SHIM-PACK | |
| 23. | 4K-7463 | [2] | SEAL-LIP TYPE | |
| 24. | 4K-8659 | [1] | BEARING-SLEEVE | |
| C | INDICATES CHANGE | |||
#SEBP14280409
2G-8660: AXLE GP-FRONT
2G8660 AXLE GP-AXLE-PART 1 OF 2
S/N 74V2059-2175 & 2177 INCLUSIVE
S/N 74V2059-2175 & 2177 INCLUSIVE
For full view, you need register
Parts for your 130G MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2G-5667 | [2] | RETAINER | |
| 2. | 2G-8625 | [1] | PIN | |
| 3. | 5P-8842 | [8] | SEAL | |
| 4. | 0S-1592 | [2] | BOLT | |
| 4D-3704 | [2] | WASHER | ||
| 5. | 2G-8606 | [1] | AXLE ASSEM. | |
| 6. | 2G-8608 | [4] | BEARING | |
| 7. | 2G-8631 | [4] | BEARING | |
| 8. | 5P-8843 | [4] | SEAL | |
| 9. | 9D-3523 | [2] | WASHER | |
| 10. | 0T-0065 | [2] | BOLT 89mm(3.5 in.)long | |
| 11. | 2G-8621 | [1] | PIN | |
| 12. | 2G-8599 | [1] | BAR ASSEM. | |
| 13. | 2G-8624 | [2] | BEARING | |
| 14. | 2G-8613 | [1] | PIN | |
| 15. | 2G-8727 | [1] | ARM ASSEM. (R.H.) | |
| (Includes) | ||||
| 2G-7388 | [1] | BEARING | ||
| 16. | 2G-7387 | [1] | BEARING | |
| 17. | 2G-8596 | [1] | HOUSING (R.H.) | |
| 18. | 9D-6523 | [1] | SOCKET ASSEM. | |
| (Includes) | ||||
| 2F-8057 | [1] | NUT | ||
| 19. | 8D-2811 | [2] | WASHER | |
| 3B-4618 | [2] | COTTER PIN | ||
| 20. | 5D-6952 | [2] | CLAMP | |
| 1B-4367 | [2] | BOLT | ||
| 3K-2889 | [2] | NUT | ||
| 21. | 9D-6521 | [1] | ROD | |
| 22. | 9D-6524 | [1] | SOCKET ASSEM. | |
| (Includes) | ||||
| 2F-8057 | [1] | NUT | ||
| 23. | 0L-1351 | [4] | BOLT | |
| 2G-8768 | [4] | WASHER | ||
| 24. | 2G-8633 | [2] | PIN | |
| 25. | 1B-5174 | [2] | PLUG | |
| 26. | 2G-5673 | [1] | WASHER (use as required) | |
| 27. | 2G-8617 | [1] | PIN | |
| 28. | 2G-8597 | [1] | HOUSING (L.H.) | |
| 29. | 3B-8489 | [10] | FITTING | |
| 30. | 5P-1075 | [4] | WASHER | |
| 31. | 2K-4973 | [2] | LOCKNUT | |
