AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3406B MARINE ENGINE 4TB00001-03481 FUEL SYSTEM Caterpillar SIS



MARINE ENGINE 3406B MARINE ENGINE 4TB
 3406B MARINE ENGINE 4TB00001-03481 SEBP1429 3406B 4TB   (1983)

Parts group 3406B:

  For full view, you need register
FUEL SYSTEM
CONTROL GP-FUEL
CONTROL GP-FUEL
4W-6117 CONTROL GP-FUEL
4W6117 FUEL RATIO CONTROL GROUP
S/N 4TB369-533
PART OF 2W1007 FUEL RATIO CONTROL
CONTROL GP-FUEL RATIO
LINES GP-FUEL RATIO CONTROL
7W-3935 LINES GP-FUEL RATIO CONTROL
7W3935 LINES GP-AIR FUEL RATIO CONTROL
S/N 4TB2016-UP
CONTROL GP-GOVERNOR
ACTUATOR GP-AIR
5N-3220 ACTUATOR GP-AIR
5N3220 ACTUATOR GP-AIR
PART OF 5N9337 GOVERNOR CONTROL
AN ATTACHMENT
3N-9081 MOUNTING GP-GOVERNOR CONTROL
3N9081 CONTROL MOUNTING GROUP
REFER TO CHART SHOWN ON PAGE 87 FOR USAGE
AN ATTACHMENT
DRAIN GP-FUEL
DRAIN GP-FUEL
4W-0423 DRAIN GP-FUEL
4W0423 DRAIN GP-FUEL
TYPE 1. LINES & ALARM SWITCH
FOR USE WITH DOUBLE WALLED FUEL INJECTION LINES
AN ATTACHMENT
DRAIN GP-FUEL
4W-0423 DRAIN GP-FUEL
4W0423 DRAIN GP-FUEL
TYPE 2. LINES & ALARM SWITCH
FOR USE WITH DOUBLE WALLED FUEL INJECTION LINES
AN ATTACHMENT
DRIVE GP-TACHOMETER
DRIVE GP-TACHOMETER
1W-8235 DRIVE GP-TACHOMETER
1W8235 TACHOMETER DRIVE GROUP
SINGLE
DRIVE GP-TACHOMETER
4W-1101 DRIVE GP-TACHOMETER
4W1101 DRIVE GP-TACHOMETER-DUAL
NOT FOR USE WITH ANY WOODWARD GOVERNOR
AN ATTACHMENT
FILTER GP-FUEL
FILTER GP-FUEL
8H-7204 FILTER GP-FUEL
8H7204 PRIMARY FUEL FILTER GROUP
AN ATTACHMENT
FILTER GP-FUEL
4N-1981 FILTER GP-FUEL
4N1981 FUEL FILTER GROUP
FILTER GP-FUEL
6N-6282 FILTER GP-FUEL
6N6282 FILTER GP-FUEL-RH
NOT FOR USE WITH #0 FLYWHEEL HOUSING
AN ATTACHMENT
FILTER GP-FUEL
6N-6290 FILTER GP-FUEL
6N6290 FILTER GROUP-DUPLEX--L.H.
NOT FOR USE WITH R.H. MOUNTED AIR STARTER WITH L.H. CONTROL
AN ATTACHMENT
GOVERNOR GP
DRIVE GP-GOVERNOR & FUEL PUMP
9N-6610 DRIVE GP-GOVERNOR & FUEL PUMP
9N6610 DRIVE GP-GOVERNOR & FUEL PUMP
DRIVE GP-GOVERNOR & FUEL PUMP
1W-6378 DRIVE GP-GOVERNOR & FUEL PUMP
1W6378 GOVERNOR AND FUEL PUMP DRIVE GROUP
PUMP GP-GOV & FUEL INJ
8N-9675 PUMP GP-GOV & FUEL INJ
8N9675 PUMP GP-GOVERNOR & FUEL INJECTION
S/N 4TB1-678
8N9682-PAGE 76, 4W2547-PAGE 80, 2W6312-PAGE 86
PUMP GP-GOV & FUEL INJ
8N-9675 PUMP GP-GOV & FUEL INJ
8N9675 PUMP GP-GOVERNOR & FUEL INJECTION
S/N 4TB679-2015
8N9682-PAGE 76, 4W2547-PAGE 80, 2W6660-PAGE 86
PUMP GP-GOV & FUEL INJ
8N-9675 PUMP GP-GOV & FUEL INJ
8N9675 GOVERNOR & FUEL INJECTION PUMP
S/N 4TB2016-2866
8N9682-PAGE 76, 4W2547-PAGE 80, 2W6660-PAGE 86, 9Y4913-PAGE 85 &
7W2831-PAGE 96B
PUMP GP-GOV & FUEL INJ
8N-9675 PUMP GP-GOV & FUEL INJ
8N9675 GOVERNOR & FUEL INJECTION PUMP GP
S/N 4TB2867-UP
8N9682-PAGE 76, 2W6660-PAGE 86, 7W2831-PAGE 96B,
9Y4913-PAGE 85, 4P1383-PAGE 82.01.01
PUMP GP-GOV & FUEL INJ
2W-6193 PUMP GP-GOV & FUEL INJ
2W6193 PUMP GP-GOVERNOR & FUEL INJECTION
S/N 4TB1-678
8N9682-PAGE 76, 2W6972-PAGE 83, 2W6312-PAGE 86
PUMP GP-GOV & FUEL INJ
2W-6193 PUMP GP-GOV & FUEL INJ
2W6193 PUMP GP-GOVERNOR & FUEL INJECTION
S/N 4TB679-2015
8N9682-PAGE 76, 2W6972-PAGE 83, 2W6660-PAGE 86
PUMP GP-GOV & FUEL INJ
2W-6193 PUMP GP-GOV & FUEL INJ
2W6193 PUMP GP-GOVERNOR & FUEL INJECTION
S/N 4TB2016-2866
8N9682-PAGE 76, 2W6972-PAGE 83, 9Y4913-PAGE 85, 2W6660-PAGE 86 &
7W2831-PAGE 96B
PUMP GP-GOV & FUEL INJ
2W-6193 PUMP GP-GOV & FUEL INJ
2W6193 GOVERNOR & FUEL INJECTION PUMP GP
S/N 4TB2867-UP
8N9682-PAGE 76, 2W6660-PAGE 86, 7W2831-PAGE 96B,
9Y4913-PAGE 85, 4P1384-PAGE 83.02
PUMP GP-GOV & FUEL INJ
7W-6071 PUMP GP-GOV & FUEL INJ
7W6071 PUMP GP- GOVERNOR & FUEL INJECTION
S/N 4TB647-2015
8N9682-PAGE 77.05, 4W2549-PAGE 82.02, 2W6660-PAGE 86
PUMP GP-GOV & FUEL INJ
7W-6071 PUMP GP-GOV & FUEL INJ
7W6071 PUMP GP-GOVERNOR & FUEL INJECTION
S/N 4TB2016-2866
8N9682-PAGE 77.05, 4W2549-PAGE 82.02, 9Y4913-PAGE 85, 2W6660-PAGE 86 &
7W2831-PAGE 96B
PUMP GP-GOV & FUEL INJ
7W-6071 PUMP GP-GOV & FUEL INJ
7W6071 GOVERNOR & FUEL INJECTION PUMP GP
S/N 4TB2867-UP
2W6660-PAGE 86, 8N9682-PAGE 77.05, 9Y4913-PAGE 85, 7W2831-PAGE 96B &
4P1381-PAGE 82.04
GOVERNOR GP
8N-9682 GOVERNOR GP
8N9682 GOVERNOR GP-PART 1 OF 2
TYPE 1
PART OF 8N9675, 2W6193 PUMP-GOVERNOR & FUEL INJECTION
GOVERNOR GP
8N-9682 GOVERNOR GP
8N9682 GOVERNOR GP-PART 2 OF 2
TYPE 1
2W5276-PAGE 78
PART OF 8N9675, 2W6193 PUMP-GOVERNOR & FUEL INJECTION
GOVERNOR GP
8N-9682 GOVERNOR GP
8N9682 GOVERNOR GP-PART 1 OF 4
TYPE 2
PART OF 8N9675, 2W6193 PUMP-GOVERNOR & FUEL INJECTION
GOVERNOR GP
8N-9682 GOVERNOR GP
8N9682 GOVERNOR GP-PART 2 OF 4
TYPE 2
PART OF 8N9675, 2W6193 GOVERNOR AND FUEL INJECTION PUMP
GOVERNOR GP
8N-9682 GOVERNOR GP
8N9682 GOVERNOR GP-PART 3 OF 4
TYPE 2
PART OF 8N9675, 2W6193 GOVERNOR AND FUEL INJECTION PUMP
GOVERNOR GP
8N-9682 GOVERNOR GP
8N9682 GOVERNOR GP-PART 4 OF 4
TYPE 2
PART OF 8N9675, 2W6193 PUMP-GOVERNOR & FUEL INJECTION PUMP
GOVERNOR GP
8N-9682 GOVERNOR GP
8N9682 GOVERNOR GP-PART 1 OF 4
TYPE 3
PART OF 8N9675, 2W6193, 7W6071 PUMP-GOVERNOR AND FUEL INJECTION
GOVERNOR GP
8N-9682 GOVERNOR GP
8N9682 GOVERNOR GP-PART 2 OF 4
TYPE 3
PART OF 8N9675, 2W6193, 7W6071 PUMP-GOVERNOR AND FUEL INJECTION
GOVERNOR GP
8N-9682 GOVERNOR GP
8N9682 GOVERNOR GP-PART 3 OF 4
TYPE 3
PART OF 8N9675, 2W6193, 7W6071 PUMP-GOVERNOR AND FUEL INJECTION
GOVERNOR GP
8N-9682 GOVERNOR GP
8N9682 GOVERNOR GROUP-PART 4 OF 4
TYPE 3
PART OF 8N9675, 2W6193, 7W6071 PUMP-GOVERNOR AND FUEL INJECTION
GOVERNOR GP
2W-5276 GOVERNOR GP
2W5276 GOVERNOR GROUP-PART 1 OF 2
TYPE 1
PART OF 8N9682 GOVERNOR
GOVERNOR GP
2W-5276 GOVERNOR GP
2W5276 GOVERNOR GROUP-PART 2 OF 2
TYPE 1
PART OF 8N9682 GOVERNOR
GOVERNOR GP
2W-5276 GOVERNOR GP
2W5276 GOVERNOR GROUP-PART 1 OF 2
TYPE 2
PART OF 8N9682 GOVERNOR
GOVERNOR GP
2W-5276 GOVERNOR GP
2W5276 GOVERNOR GROUP-PART 2 OF 2
TYPE 2
PART OF 8N9682 GOVERNOR
3N-9198 CONTROL AR-GOVERNOR
3N9198 MECHANICAL GOVERNOR CONTROL ARRANGEMENT-REMOTE MOUNTED
REFER TO CHART SHOWN ON PAGE 87 FOR USAGE. AN ATTACHMENT
3N-9158 CONTROL GP-GOVERNOR
3N9158 MECHANICAL GOVERNOR CONTROL GROUP-REMOTE-DUAL LEVER
REFER TO CHART SHOWN ON PAGE 87 FOR USAGE. AN ATTACHMENT
3N-9199 CONTROL AR-GOVERNOR
3N9199 MECHANICAL GOVERNOR CONTROL ARRANGEMENT-REMOTE MOUNTED
REFER TO CHART SHOWN ON PAGE 87 FOR USAGE. AN ATTACHMENT
CONTROL GP-GOVERNOR
1W-7413 CONTROL GP-GOVERNOR
1W7413 GOVERNOR CONTROL GP-LH-POSITIVE LOCK
4N3830-PAGE 91
AN ATTACHMENT
CONTROL GP-GOVERNOR
1W-7412 CONTROL GP-GOVERNOR
1W7412 GOVERNOR CONTROL GP-LH-REMOTE & POSITIVE LOCK
4N3828-PAGE 91
AN ATTACHMENT
CONTROL GP-GOVERNOR
4N-3830 CONTROL GP-GOVERNOR
4N3830 CONTROL GP-GOVERNOR-POSITIVE LOCKING
PART OF 1W7413 GOVERNOR CONTROL
AN ATTACHMENT
CONTROL GP-GOVERNOR
4N-3828 CONTROL GP-GOVERNOR
4N3828 CONTROL GP-GOVERNOR-REMOTE & POSITIVE LOCKING
PART OF 1W7412 & 4N3834 GOVERNOR CONTROL
AN ATTACHMENT
CONTROL GP-GOVERNOR
5N-9337 CONTROL GP-GOVERNOR
5N9337 GOVERNOR CONTROL GROUP
5N3220-PAGE 93B
AN ATTACHMENT
CONTROL GP-GOVERNOR
4N-3834 CONTROL GP-GOVERNOR
4N3834 GOVERNOR CONTROL GP-LH-REMOTE & POSITIVE LOCKING
4N3828-PAGE 91
PART OF 3N9081 CONTROL MOUNTING
AN ATTACHMENT
CONTROL GP-FUEL RATIO
2W-1007 CONTROL GP-FUEL RATIO
2W1007 FUEL RATIO CONTROL GP
S/N 4TB1-368
4W1842-PAGE 96
CONTROL GP-FUEL RATIO
2W-1007 CONTROL GP-FUEL RATIO
2W1007 FUEL RATIO CONTROL GROUP
S/N 4TB369-533
4W6117-PAGE 96A
CONTROL GP-FUEL RATIO
2W-1007 CONTROL GP-FUEL RATIO
2W1007 CONTROL GP-FUEL RATIO
S/N 4TB534-2015
7W2831-PAGE 96B
CONTROL GP-FUEL RATIO
4W-1842 CONTROL GP-FUEL RATIO
4W1842 FUEL RATIO CONTROL GROUP
S/N 4TB1-368
PART OF 2W1007 FUEL RATIO CONTROL
CONTROL GP-FUEL
4W-6117 CONTROL GP-FUEL
4W6117 FUEL RATIO CONTROL GROUP
S/N 4TB369-533
PART OF 2W1007 FUEL RATIO CONTROL
CONTROL GP-FUEL RATIO
7W-2831 CONTROL GP-FUEL RATIO
7W2831 CONTROL GP-FUEL RATIO*R
S/N 4TB534-UP
PART OF 2W1007 FUEL RATIO CONTROL, 7W6071, 2W6193,
8N9675 PUMP-GOVERNOR & FUEL INJECTION
LINES GP-FUEL
LINES GP-FUEL RATIO CONTROL
7W-3935 LINES GP-FUEL RATIO CONTROL
7W3935 LINES GP-AIR FUEL RATIO CONTROL
S/N 4TB2016-UP
LINES GP-FUEL INJECTION
1W-0557 LINES GP-FUEL INJECTION
1W0557 LINES GP-FUEL INJECTION
S/N 4TB1-646
2W3776 & 2W3777-PAGE 98
LINES GP-FUEL INJECTION
1W-0557 LINES GP-FUEL INJECTION
1W0557 LINES GP-FUEL INJECTION
S/N 4TB647-681
4W7017-PAGE 100, 2W3776 & 2W3777-PAGE 98
LINES GP-FUEL INJECTION
1W-0557 LINES GP-FUEL INJECTION
1W0557 LINES GP-FUEL INJECTION
S/N 4TB682-842
4W7017-PAGE 100, 7W8627 & 7W8628-PAGE 98.01
LINES GP-FUEL INJECTION
1W-0557 LINES GP-FUEL INJECTION
1W0557 LINES GP-FUEL INJECTION
S/N 4TB843-957
4W7017-PAGE 100, 7C2107 & 7C2108-PAGE 98.02
LINES GP-FUEL INJECTION
1W-0557 LINES GP-FUEL INJECTION
1W0557 LINES GP-FUEL INJECTION
S/N 4TB958-1099
4W7017-PAGE 100, 7C3418 & 7C3428-PAGE 98.03
LINES GP-FUEL INJECTION
1W-0557 LINES GP-FUEL INJECTION
1W0557 LINES GP-FUEL INJECTION
S/N 4TB1100-1281
4W7017-PAGE 100, 7C9935 & 7C9936-PAGE 98.04 & 7C9937-PAGE 98.05
LINES GP-FUEL INJECTION
4W-1566 LINES GP-FUEL INJECTION
4W1566 LINES GP-FUEL INJECTION
S/N 4TB1282-2019
4W7017-PAGE 100, 7C9935 & 7C9936-PAGE 98.04, 7C9937-PAGE 98.05
LINES GP-FUEL INJECTION
4W-1566 LINES GP-FUEL INJECTION
4W1566 LINES GP-FUEL INJECTION
S/N 4TB2020-2866
4W7017-PAGE 100, 7C9935 & 7C9936-PAGE 98.04, 7C9937-PAGE 98.05
LINES GP-FUEL INJECTION
4W-1566 LINES GP-FUEL INJECTION
4W1566 LINES GP-FUEL INJECTION
S/N 4TB2867-3261
4W7017-PAGE 100, 4P3673-PAGE 98.05
4P3674 & 4P3675-PAGE 98.06
LINES GP-FUEL INJECTION
4W-1566 LINES GP-FUEL INJECTION
4W1566 LINES GP-FUEL INJECTION
S/N 4TB3262-UP
4W7017-PAGE 100, 4P9658 & 4P9659-PAGE 98.07, 4P9660-PAGE 98.08
LINES GP-FUEL INJECTION
4W-8293 LINES GP-FUEL INJECTION
4W8293 FUEL INJECTION LINES GROUP
S/N 4TB414-468
2W3776, 2W3777-PAGE 98
LINES GP-FUEL INJECTION
4W-8293 LINES GP-FUEL INJECTION
4W8293 LINES GP-FUEL INJECTION
S/N 4TB469-681
2W3776, 2W3777-PAGE 98
LINES GP-FUEL INJECTION
4W-8293 LINES GP-FUEL INJECTION
4W8293 LINES GP-FUEL INJECTION
S/N 4TB682-842
7W8627, 7W8628-PAGE 98.01, 4W7018-PAGE 97F
LINES GP-FUEL INJECTION
4W-8293 LINES GP-FUEL INJECTION
4W8293 LINES GP-FUEL INJECTION
S/N 4TB843-957
4W7018-PAGE 97F, 7C2107 & 7C2108-PAGE 98.02
LINES GP-FUEL INJECTION
4W-8293 LINES GP-FUEL INJECTION
4W8293 LINES GP-FUEL INJECTION
S/N 4TB958-1102
4W7018-PAGE 97F, 7C3418 & 7C3428-PAGE 98.03
LINES GP-FUEL INJECTION
4W-8293 LINES GP-FUEL INJECTION
4W8293 LINES GP-FUEL INJECTION
S/N 4TB1103-2019
4W7018-PAGE 97F, 7C9935 & 7C9936-PAGE 98.04, 7C9937-PAGE 98.05
LINES GP-FUEL INJECTION
4W-8293 LINES GP-FUEL INJECTION
4W8293 LINES GP-FUEL INJECTION
S/N 4TB2020-2866
4W7018-PAGE 97F, 7C9935 & 7C9936-PAGE 98.04 &
7C9937-PAGE 98.05
LINES GP-FUEL INJECTION
4W-8293 LINES GP-FUEL INJECTION
4W8293 LINES GP-FUEL INJECTION
S/N 4TB2867-3261
4W7018-PAGE 97F, 4P3673-PAGE 98.05
4P3674 & 4P3675-PAGE 98.06
LINES GP-FUEL INJECTION
4W-8293 LINES GP-FUEL INJECTION
4W8293 LINES GP-FUEL INJECTION
S/N 4TB3262-UP
4W7018-PAGE 97F, 4P9658 & 4P9659-PAGE 98.07, 4P9660-PAGE 98.08
LINES GP-FUEL INJECTION
2W-3776 LINES GP-FUEL INJECTION
2W3776 LINES GP-FUEL INJECTION
S/N 4TB1-681
PART OF 1W0557 & 4W8293 FUEL INJECTION LINES
LINES GP-FUEL INJECTION
2W-3777 LINES GP-FUEL INJECTION
2W3777 LINES GP-FUEL INJECTION
S/N 4TB1-681
PART OF 1W0557 & 4W8293 FUEL INJECTION LINES
LINES GP-FUEL INJECTION
7W-8628 LINES GP-FUEL INJECTION
7W8628 LINES GP-FUEL INJECTION
S/N 4TB682-842
PART OF 1W0557 & 4W8293 FUEL INJECTION LINES
LINES GP-FUEL INJECTION
7W-8627 LINES GP-FUEL INJECTION
7W8627 LINES GP-FUEL INJECTION
S/N 4TB682-842
PART OF 1W0557 & 4W8293 FUEL INJECTION LINES
LINES GP-FUEL INJECTION
7C-2108 LINES GP-FUEL INJECTION
7C2108 LINES GP-FUEL INJECTION
S/N 4TB843-957
PART OF 1W0557, 4W8293 LINES-FUEL INJECTION
LINES GP-FUEL INJECTION
7C-2107 LINES GP-FUEL INJECTION
7C2107 LINES GP-FUEL INJECTION
S/N 4TB843-957
PART OF 1W0557, 4W8293 LINES-FUEL INJECTION
LINES GP-FUEL INJECTION
7C-3428 LINES GP-FUEL INJECTION
7C3428 LINES GP-FUEL INJECTION
S/N 4TB958-1102
PART OF 1W0557 & 4W8293 FUEL INJECTION LINES
LINES GP-FUEL INJECTION
7C-3418 LINES GP-FUEL INJECTION
7C3418 LINES GP-FUEL INJECTION
S/N 4TB958-1099
PART OF 1W0557 & 4W8293 FUEL INJECTION LINES
LINES GP-FUEL INJECTION
7C-9936 LINES GP-FUEL INJECTION
7C9936 LINES GP-FUEL INJECTION
S/N 4TB1100-UP
PART OF 1W0557, 4W8293 & 4W1566 LINES
LINES GP-FUEL INJECTION
7C-9935 LINES GP-FUEL INJECTION
7C9935 LINES GP-FUEL INJECTION
S/N 4TB1100-UP
PART OF 1W0557, 4W8293 & 4W1566 LINES
LINES GP-FUEL INJECTION
4P-3673 LINES GP-FUEL INJECTION
4P3673 LINES GP-FUEL INJECTION
PART OF 4W1566 & 4W8293 LINES-FUEL INJECTION
LINES GP-FUEL INJECTION
7C-9937 LINES GP-FUEL INJECTION
7C9937 LINES GP-FUEL INJECTION
S/N 4TB1100-UP
PART OF 1W0557, 4W8293 & 4W1566 LINES
LINES GP-FUEL INJECTION
4P-3675 LINES GP-FUEL INJECTION
4P3675 LINES GP-FUEL INJECTION
PART OF 4W1566 & 4W8293 LINES-FUEL INJECTION
LINES GP-FUEL INJECTION
4P-3674 LINES GP-FUEL INJECTION
4P3674 LINES GP-FUEL INJECTION
PART OF 4W1566 & 4W8293 LINES-FUEL INJECTION
LINES GP-FUEL INJECTION
4P-9659 LINES GP-FUEL INJECTION
4P9659 LINES GP-FUEL INJECTION
PART OF 4W1566, 4W8293 LINES-FUEL INJECTION
LINES GP-FUEL INJECTION
4P-9658 LINES GP-FUEL INJECTION
4P9658 LINES GP-FUEL INJECTION
PART OF 4W1566, 4W8293 LINES-FUEL INJECTION
LINES GP-FUEL INJECTION
4P-9660 LINES GP-FUEL INJECTION
4P9660 LINES GP-FUEL INJECTION
S/N 4TB3262-UP
PART OF 4W1566, 4W8293 LINES-FUEL INJECTION
LINES GP-FUEL INJECTION
1W-3138 LINES GP-FUEL INJECTION
1W3138 LINES GP-FUEL INJECTION
TYPE 2
7C4307 & 7C4308-PAGE 99.02
AN ATTACHMENT
LINES GP-FUEL INJECTION
1W-3138 LINES GP-FUEL INJECTION
1W3138 LINES GP-FUEL INJECTION
TYPE 1
2W3792-PAGE 99.01, 2W3783-PAGE 100
AN ATTACHMENT
LINES GP-FUEL INJECTION
2W-3792 LINES GP-FUEL INJECTION
2W3792 LINES GP-FUEL INJECTION-DOUBLE WALLED
REPLACED BY 7C4307-PAGE 99.02
PART OF 1W3138 FUEL INJECTION LINES
AN ATTACHMENT
LINES GP-FUEL INJECTION
7C-4308 LINES GP-FUEL INJECTION
7C4308 LINES GP-FUEL INJECTION
PART OF 1W3138 LINES-FUEL INJECTION
AN ATTACHMENT
LINES GP-FUEL INJECTION
7C-4307 LINES GP-FUEL INJECTION
7C4307 LINES GP-FUEL INJECTION
PART OF 1W3138 LINES-FUEL INJECTION
AN ATTACHMENT
LINES GP-FUEL INJECTION
2W-3783 LINES GP-FUEL INJECTION
2W3783 LINES GP-FUEL INJECTION-DOUBLE WALLED
REPLACED BY 7C4308-PAGE 99.02
PART OF 1W3138 FUEL INJECTION LINES
AN ATTACHMENT
LINES GP-FUEL FILTER
2W-3452 LINES GP-FUEL FILTER
2W3452 LINES GP-FUEL FILTER
S/N 4TB1-1654
LINES GP-FUEL FILTER
2W-3452 LINES GP-FUEL FILTER
2W3452 LINES GP-FUEL FILTER
S/N 4TB1655-UP
LINES GP-FUEL FILTER
2W-3457 LINES GP-FUEL FILTER
2W3457 LINES GP-FUEL FILTER
S/N 4TB1655-UP
FOR USE WITH 8H7204 PRIMARY FILTER
AN ATTACHMENT
LINES GP-FUEL FILTER
2W-3457 LINES GP-FUEL FILTER
2W3457 LINES GP-FUEL FILTER
S/N 4TB1-1654
FOR USE WITH 8H7204 PRIMARY FILTER
AN ATTACHMENT
9Y-4812 LINES GP-FLEXIBLE FUEL
9Y4812 LINES GP-FLEXIBLE FUEL
AN ATTACHMENT
LINES GP-FUEL FILTER
2W-7595 LINES GP-FUEL FILTER
2W7595 FUEL FILTER LINES GP
REFER TO CHART SHOWN ON PAGE 183 FOR USAGE
AN ATTACHMENT
LINES GP-FLEXIBLE FUEL
3N-6668 LINES GP-FLEXIBLE FUEL
3N6668 FLEXIBLE FUEL LINES GROUP
AN ATTACHMENT
DRAIN GP-FUEL
4W-0423 DRAIN GP-FUEL
4W0423 DRAIN GP-FUEL
TYPE 1. LINES & ALARM SWITCH
FOR USE WITH DOUBLE WALLED FUEL INJECTION LINES
AN ATTACHMENT
DRAIN GP-FUEL
4W-0423 DRAIN GP-FUEL
4W0423 DRAIN GP-FUEL
TYPE 2. LINES & ALARM SWITCH
FOR USE WITH DOUBLE WALLED FUEL INJECTION LINES
AN ATTACHMENT
PUMP GP-FUEL INJECTION
DRIVE GP-GOVERNOR & FUEL PUMP
9N-6610 DRIVE GP-GOVERNOR & FUEL PUMP
9N6610 DRIVE GP-GOVERNOR & FUEL PUMP
DRIVE GP-GOVERNOR & FUEL PUMP
1W-6378 DRIVE GP-GOVERNOR & FUEL PUMP
1W6378 GOVERNOR AND FUEL PUMP DRIVE GROUP
PUMP GP-GOV & FUEL INJ
8N-9675 PUMP GP-GOV & FUEL INJ
8N9675 PUMP GP-GOVERNOR & FUEL INJECTION
S/N 4TB1-678
8N9682-PAGE 76, 4W2547-PAGE 80, 2W6312-PAGE 86
PUMP GP-GOV & FUEL INJ
8N-9675 PUMP GP-GOV & FUEL INJ
8N9675 PUMP GP-GOVERNOR & FUEL INJECTION
S/N 4TB679-2015
8N9682-PAGE 76, 4W2547-PAGE 80, 2W6660-PAGE 86
PUMP GP-GOV & FUEL INJ
8N-9675 PUMP GP-GOV & FUEL INJ
8N9675 GOVERNOR & FUEL INJECTION PUMP
S/N 4TB2016-2866
8N9682-PAGE 76, 4W2547-PAGE 80, 2W6660-PAGE 86, 9Y4913-PAGE 85 &
7W2831-PAGE 96B
PUMP GP-GOV & FUEL INJ
8N-9675 PUMP GP-GOV & FUEL INJ
8N9675 GOVERNOR & FUEL INJECTION PUMP GP
S/N 4TB2867-UP
8N9682-PAGE 76, 2W6660-PAGE 86, 7W2831-PAGE 96B,
9Y4913-PAGE 85, 4P1383-PAGE 82.01.01
PUMP GP-GOV & FUEL INJ
2W-6193 PUMP GP-GOV & FUEL INJ
2W6193 PUMP GP-GOVERNOR & FUEL INJECTION
S/N 4TB1-678
8N9682-PAGE 76, 2W6972-PAGE 83, 2W6312-PAGE 86
PUMP GP-GOV & FUEL INJ
2W-6193 PUMP GP-GOV & FUEL INJ
2W6193 PUMP GP-GOVERNOR & FUEL INJECTION
S/N 4TB679-2015
8N9682-PAGE 76, 2W6972-PAGE 83, 2W6660-PAGE 86
PUMP GP-GOV & FUEL INJ
2W-6193 PUMP GP-GOV & FUEL INJ
2W6193 PUMP GP-GOVERNOR & FUEL INJECTION
S/N 4TB2016-2866
8N9682-PAGE 76, 2W6972-PAGE 83, 9Y4913-PAGE 85, 2W6660-PAGE 86 &
7W2831-PAGE 96B
PUMP GP-GOV & FUEL INJ
2W-6193 PUMP GP-GOV & FUEL INJ
2W6193 GOVERNOR & FUEL INJECTION PUMP GP
S/N 4TB2867-UP
8N9682-PAGE 76, 2W6660-PAGE 86, 7W2831-PAGE 96B,
9Y4913-PAGE 85, 4P1384-PAGE 83.02
PUMP GP-GOV & FUEL INJ
7W-6071 PUMP GP-GOV & FUEL INJ
7W6071 PUMP GP- GOVERNOR & FUEL INJECTION
S/N 4TB647-2015
8N9682-PAGE 77.05, 4W2549-PAGE 82.02, 2W6660-PAGE 86
PUMP GP-GOV & FUEL INJ
7W-6071 PUMP GP-GOV & FUEL INJ
7W6071 PUMP GP-GOVERNOR & FUEL INJECTION
S/N 4TB2016-2866
8N9682-PAGE 77.05, 4W2549-PAGE 82.02, 9Y4913-PAGE 85, 2W6660-PAGE 86 &
7W2831-PAGE 96B
PUMP GP-GOV & FUEL INJ
7W-6071 PUMP GP-GOV & FUEL INJ
7W6071 GOVERNOR & FUEL INJECTION PUMP GP
S/N 4TB2867-UP
2W6660-PAGE 86, 8N9682-PAGE 77.05, 9Y4913-PAGE 85, 7W2831-PAGE 96B &
4P1381-PAGE 82.04
PUMP GP-FUEL INJECTION
4W-2547 PUMP GP-FUEL INJECTION
4W2547 PUMP GP-FUEL INJECTION
TYPE 1. S/N 4TB1-2866
PART OF 8N9675 GOVERNOR & FUEL INJECTION PUMP
PUMP GP-FUEL INJECTION
4W-2547 PUMP GP-FUEL INJECTION
4W2547 PUMP GP-FUEL INJECTION
TYPE 2. S/N 4TB1-2866
PART OF 8N9675 GOVERNOR & FUEL INJECTION PUMP
PUMP GP-FUEL INJECTION
4W-2547 PUMP GP-FUEL INJECTION
4W2547 PUMP GP-FUEL INJECTION
TYPE 3. S/N 4TB1-2866
PART OF 8N9675 GOVERNOR & FUEL INJECTIOM PUMP
PUMP GP-FUEL INJECTION
4P-1383 PUMP GP-FUEL INJECTION
4P1383 PUMP GP-FUEL INJECTION
TYPE 1. S/N 4TB2867-UP
7E6006-PAGE 82.05
PART OF 8N9675 GOVERNOR & FUEL INJECTION PUMP
PUMP GP-FUEL INJECTION
4P-1383 PUMP GP-FUEL INJECTION
4P1383 PUMP GP-FUEL INJECTION
TYPE 2. S/N 4TB2867-UP
4P7681-PAGE 82.05
PART OF 8N9675 GOVERNOR & FUEL INJECTION PUMP
PUMP GP-FUEL INJECTION
4P-1383 PUMP GP-FUEL INJECTION
4P1383 PUMP GP-FUEL INJECTION
TYPE 3. S/N 4TB2867-UP
1086633-PAGE 82.06
PART OF 8N9675 GOVERNOR & FUEL INJECTION PUMP
PUMP GP-FUEL INJECTION
4W-2549 PUMP GP-FUEL INJECTION
4W2549 PUMP GP-FUEL INJECTION
TYPE 1. S/N 4TB647-2866
PART OF 7W6071 GOVERNOR AND FUEL INJECTION PUMP
PUMP GP-FUEL INJECTION
4W-2549 PUMP GP-FUEL INJECTION
4W2549 PUMP GP-FUEL INJECTION
TYPE 2. S/N 4TB647-2866
PART OF 7W6071 GOVERNOR & FUEL INJECTION PUMP
PUMP GP-FUEL INJECTION
4P-1381 PUMP GP-FUEL INJECTION
4P1381-PUMP GP-FUEL INJECTION
TYPE 1. S/N 4TB2867-UP
7E6006-PAGE 82.05
PART OF 7W6071 PUMP-GOVERNOR & FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1381 PUMP GP-FUEL INJECTION
4P1381 PUMP GP-FUEL INJECTION
TYPE 2. S/N 4TB2867-UP
4P7681-PAGE 82.05
PART OF 7W6071 PUMP-GOVERNOR & FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1381 PUMP GP-FUEL INJECTION
4P1381 PUMP GP-FUEL INJECTION
TYPE 3. S/N 4TB2867-UP
1086633-PAGE 82.06
PART OF 7W6071 PUMP-GOVERNOR & FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-7681 PUMP GP-FUEL INJECTION
4P7681 PUMP GP-FUEL INJECTION
S/N 4TB2867-UP
PART OF 4P1381, 4P1383, 4P1384 PUMPS-FUEL INJECTION
PUMP GP-FUEL INJECTION
7E-6006 PUMP GP-FUEL INJECTION
7E6006 PUMP GP-FUEL INJECTION
S/N 4TB2867-UP
PART OF 4P1381, 4P1383 & 4P1384 PUMPS-FUEL INJECTION
PUMP GP-FUEL INJECTION
108-6633 PUMP GP-FUEL INJECTION
1086633 PUMP GP-FUEL INJECTION
PART OF 4P1381, 4P1383, PUMP-FUEL INJECTION
PUMP GP-FUEL INJECTION
2W-6972 PUMP GP-FUEL INJECTION
2W6972 FUEL INJECTION PUMP GP
TYPE 1. S/N 4TB1-2866
PART OF 2W6193 GOVERNOR & FUEL INJECTION PUMP
PUMP GP-FUEL INJECTION
2W-6972 PUMP GP-FUEL INJECTION
2W6972 PUMP GP-FUEL INJECTION
TYPE 2. S/N 4TB1-2866
PART OF 2W6193 GOVERNOR & FUEL INJECTION PUMP
PUMP GP-FUEL INJECTION
4P-1384 PUMP GP-FUEL INJECTION
4P1384 PUMP GP-FUEL INJECTION
TYPE 1. S/N 4TB2867-UP
7E6006-PAGE 82.05
PART OF 2W6193 GOVERNOR & FUEL INJECTION PUMP
PUMP GP-FUEL INJECTION
4P-1384 PUMP GP-FUEL INJECTION
4P1384 PUMP GP-FUEL INJECTION
TYPE 2. S/N 4TB2867-UP
4P7681-PAGE 82.05
PART OF 2W6193 GOVERNOR & FUEL INJECTION PUMP
FASTENER GP-FUEL INJ PUMP
9Y-4913 FASTENER GP-FUEL INJ PUMP
9Y4913 FASTENER GP
S/N 4TB2016-UP
PART OF 7W6071, 2W6193, 8N9675, GOVERNORS &
FUEL INJECTION PUMPS
FASTENER GP-FUEL INJ PUMP
1W-7376 FASTENER GP-FUEL INJ PUMP
1W7376 INJECTION PUMP FASTENER GROUP
NOZZLE AS-FUEL VALVE
4W-7018 NOZZLE AS-FUEL VALVE
4W7018 NOZZLE AS-FUEL VALVE*R
S/N 4TB469-UP
PART OF 4W8293 LINES-FUEL INJECTION
NOZZLE AS-FUEL VALVE
4W-7017 NOZZLE AS-FUEL VALVE
4W7017 NOZZLE AS-FUEL VALVE*R
S/N 4TB647-UP
PART OF 1W0557 & 4W1566 LINES
PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
4N-3287 PUMP GP-FUEL PRIMING
4N3287 FUEL PRIMING PUMP GROUP
PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
1W-1700 PUMP GP-FUEL TRANSFER
1W1700 PUMP GP-FUEL TRANSFER*R
S/N 4TB1-382
PART OF 2W4381 PUMP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
2W-4381 PUMP GP-FUEL TRANSFER
2W4381 PUMP GP-FUEL TRANSFER
1W1700-PAGE 105
PUMP GP-FUEL TRANSFER
1W-1700 PUMP GP-FUEL TRANSFER
1W1700 PUMP GP-FUEL TRANSFER*R
S/N 4TB642-2419
PART OF 2W4381-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
1W-1700 PUMP GP-FUEL TRANSFER
1W1700 PUMP GP-FUEL TRANSFER*R
S/N 4TB383-641
PART OF 2W4381 PUMP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
1W-1700 PUMP GP-FUEL TRANSFER
1W1700 PUMP GP-FUEL TRANSFER*R
S/N 4TB2420-UP
PART OF 2W4381 PUMP-FUEL TRANSFER
COVER GP-FUEL TRANSFER
4W-1727 COVER GP-FUEL TRANSFER
4W1727 COVER GP-FUEL TRANSFER
PART OF 7C3433 SERVICE METER
AN ATTACHMENT
SEPARATOR GP-WATER
SEPARATOR GP-WATER
2W-4234 SEPARATOR GP-WATER
2W4234 SEPARATOR GP-WATER
FOR USE WITH MARINE PROPULSION & MARINE AUXILIARY ENGINES
AN ATTACHMENT
TORQUE CONTROL GP
TORQUE CONTROL GP
2W-6660 TORQUE CONTROL GP
2W6660 TORQUE CONTROL GP
S/N 4TB647-UP
PART OF 8N9675, 7W6071, 2W6193 GOVERNOR &
FUEL INJECTION
TORQUE CONTROL GP
2W-6312 TORQUE CONTROL GP
2W6312 TORQUE CONTROL GP
S/N 4TB1-678
PART OF 8N9675 & 2W6193 PUMP-GOVERNOR & FUEL INJECTION

Information:

(For parts list, see above)

Special Instruction
3406 New Scroll Fuel System (NSFS) Camshaft Plugs{1110}
3406 New Scroll Fuel System (NSFS) Camshaft Plugs{1110}
Service Magazine
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly{1251,1253,1281,1292}
1992/09/21
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Engine News
Information For Repair Of Hydraulic Fuel Ratio Controls
1983/08/17
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines
1984/04/11
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel Systems
1985/12/01
Serviceable Parts For New Fuel Ratio Control; Pressurize Control To Set Rack
1987/05/01
New Components Used In Fuel Ratio Control Groups
1992/05/01
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Specifications
Fuel Ratio Control
3406B INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
Fuel Ratio Control
SUPPLEMENT 3406B FUEL RATIO CONTROL
Fuel Ratio Control
3406B INDUSTRIAL & MARINE ENGINES
Service Magazine
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Service Letter-NACD
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Ratio Control
SUPPLEMENT 3406B FUEL RATIO CONTROL
Service Magazine
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
Engine News
Information For Repair Of Hydraulic Fuel Ratio Controls
1983/08/17
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines
1984/04/11
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel Systems
1985/12/01
Serviceable Parts For New Fuel Ratio Control; Pressurize Control To Set Rack
1987/05/01
New Components Used In Fuel Ratio Control Groups
1992/05/01
Cat® Reman Announces New Fuel Pump, Fuel Ratio Control, and Fuel Injector Options for Certain Engines {1251, 1278}
2014/09/05
Cat<SUP>&reg;</SUP> Reman Announces Additions to the Fuel Air Ratio Controls Portfolio for Certain Engine Applications {1278}
2015/06/26
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Specifications
Fuel Ratio Control
3406B INDUSTRIAL & MARINE ENGINES
Fuel Ratio Control
3406C INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
Fuel Ratio Control
SUPPLEMENT 3406B FUEL RATIO CONTROL
Fuel Ratio Control
3406B INDUSTRIAL & MARINE ENGINES
Fuel Ratio Control
3406C INDUSTRIAL & MARINE ENGINES
Service Magazine
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Special Bolts Help Prevent Unauthorized Modification Of Fuel System And Governor Settings{1250,1264,1278,1287}
1985/11/11
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
Engine News
Information For Repair Of Hydraulic Fuel Ratio Controls
1983/08/17
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct
1986/05/01
FT Tooling Prints Available For Bushing Installation In Governor Housing
1986/05/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Serviceable Parts For New Fuel Ratio Control; Pressurize Control To Set Rack
1987/05/01
New Governor Weight And Race Increase Durability {1264}
1996/09/23
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Letter-NACD
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Replacing Solenoid Assemblies On Certain 3406C Commercial Engines
Product Support Program For Replacing Solenoid Assemblies On Certain 3406C Commercial Engines
Service Letter-Australia
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Replacing Solenoid Assemblies On Certain 3406C Commercial Engines
Product Support Program For Replacing Solenoid Assemblies On Certain 3406C Commercial Engines
Service Letter-CFEL
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Replacing Solenoid Assemblies On Certain 3406C Commercial Engines
Product Support Program For Replacing Solenoid Assemblies On Certain 3406C Commercial Engines
Service Letter-CSARL
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Replacing Solenoid Assemblies On Certain 3406C Commercial Engines
Product Support Program For Replacing Solenoid Assemblies On Certain 3406C Commercial Engines
Service Letter-Americas
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Replacing Solenoid Assemblies On Certain 3406C Commercial Engines
Product Support Program For Replacing Solenoid Assemblies On Certain 3406C Commercial Engines
Service Letter-Truck/Ag/Marine
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Specifications
Governor Controls
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
Governor Linkage
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
Governor Control
3406C INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Service Letter-China
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Replacing Solenoid Assemblies On Certain 3406C Commercial Engines
Product Support Program For Replacing Solenoid Assemblies On Certain 3406C Commercial Engines
Service Letter-Asia
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Replacing Solenoid Assemblies On Certain 3406C Commercial Engines
Product Support Program For Replacing Solenoid Assemblies On Certain 3406C Commercial Engines
Service Letter-APD
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Replacing Solenoid Assemblies On Certain 3406C Commercial Engines
Product Support Program For Replacing Solenoid Assemblies On Certain 3406C Commercial Engines
Service Magazine
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Correct Wiring And Fuse Must Be Used For Correct Operation Of Shut-Off Solenoid Group{1259}
1984/01/30
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
FT Tooling Prints Available For Bushing Installation In Governor Housing{0600,1287}
1986/05/05
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
Engine News
Eliminating Interference Between Governor Housing And Tachometer Drive
1985/08/01
Disassembly and Assembly
Tachometer Drive
3406B INDUSTRIAL & MARINE ENGINES
Tachometer Drive
3406C INDUSTRIAL & MARINE ENGINES
Service Magazine
Eliminating Interference Between Governor Housing And Tachometer Drive{1264,7487}
1985/08/12
Engine News
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Gasket Leakage On Aftermarket Fuel Filters
1986/01/01
Improved Fuel Priming Pump Used
1987/05/01
Improved 1R-0712 Fuel Filter Available{1261}
1994/03/01
Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/23
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
Improved Seal on Fuel Filter {1261}
2007/07/30
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
Service Letter-NACD
Product Support Program For Replacing Cracked Fuel Lines On Certain 3406C Engines Used In Certain Machine, Commercial, Industrial And Marine Applications
Product Support Program For Replacing Cracked Fuel Lines On Certain 3406C Engines Used In Certain Machine, Commercial, Industrial And Marine Applications
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Specifications
Primary Fuel Filter
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
Primary Fuel Filter
3406C INDUSTRIAL & MARINE ENGINES
Fuel Filter Base
3406C INDUSTRIAL & MARINE ENGINES
Fuel Filter And Lines
3406C INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Letter-China
Product Support Program For Replacing Cracked Fuel Lines On Certain 3406C Engines Used In Certain Machine, Commercial, Industrial And Marine Applications
Product Support Program For Replacing Cracked Fuel Lines On Certain 3406C Engines Used In Certain Machine, Commercial, Industrial And Marine Applications
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Priming Pump
3406B INDUSTRIAL & MARINE ENGINES
Fuel Filter Base
3406B INDUSTRIAL & MARINE ENGINES
Fuel Filter Base
3406C INDUSTRIAL & MARINE ENGINES
Service Magazine
Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16
Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line{1274}
1978/06/26
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
Special Instruction
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Service Magazine
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Diesel Fuel Recommendation Expanded{1280}
1977/02/14
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Special Instruction
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Service Letter-NACD
Product Support Program For Replacing Cracked Fuel Lines On Certain 3406C Engines Used In Certain Machine, Commercial, Industrial And Marine Applications
Product Support Program For Replacing Cracked Fuel Lines On Certain 3406C Engines Used In Certain Machine, Commercial, Industrial And Marine Applications
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Letter-China
Product Support Program For Replacing Cracked Fuel Lines On Certain 3406C Engines Used In Certain Machine, Commercial, Industrial And Marine Applications
Product Support Program For Replacing Cracked Fuel Lines On Certain 3406C Engines Used In Certain Machine, Commercial, Industrial And Marine Applications
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Service Letter-APD
Product Support Program For Replacing Cracked Fuel Lines On Certain 3406C Engines Used In Certain Machine, Commercial, Industrial And Marine Applications
Product Support Program For Replacing Cracked Fuel Lines On Certain 3406C Engines Used In Certain Machine, Commercial, Industrial And Marine Applications
Service Magazine
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Orifice Fitting Or Snubber Can Help Stop Erratic Fuel Gauge Operation{7456}
1985/06/24
Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
Service Information For Woodward Governors
1983/10/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
New Valve Assembly And Seal Used In Fuel Transfer Pump
1984/05/16
Bonnet Of Fuel Injection Pump Group Now Serviced Separately
1984/12/12
Fill Oil Sump Before Installing Woodward Governor
1985/01/16
Over Fueling Spring No Longer Used In Governor
1985/03/01
Thread Lock Now Used On Timing Advance Bolts
1985/08/01
Eliminating Interference Between Governor Housing And Tachometer Drive
1985/08/01
Special Instruction Available To Salvage Governor Housing
1985/08/01
Fuel Transfer Pump Improved
1985/11/01
Check Fuel Injection Replacement Pump Installation
1985/11/01
Special Bolts Help Prevent Unauthorized Modification Of Fuel System And Governor Settings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct
1986/05/01
FT Tooling Prints Available For Bushing Installation In Governor Housing
1986/05/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
New Material Used For Disc In Valve Assemblies In Fuel Transfer Pump Groups
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Improved Retaining Bushing In Fuel Injection Pump
1986/12/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters
1987/10/01
Corrections For Systems Operation, Troubleshooting, And Specifications For 2301 Electric Governors For Generator Set And Industrial Engines, SENR2928-01
1991/05/01
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings
1991/10/01
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings
1992/01/01
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks
1992/08/01
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly
1992/09/01
Fuel Injection Pump Improvements{1251}
1994/02/01
New Seals In Pump Fastener Group And Fuel Injection Pump Group Have Improved Heat Set Resistance {1251}
1994/09/01
Governor Spring Guide Press Depth {1287,1284}
1996/01/17
New Governor Weight And Race Increase Durability {1264}
1996/09/23
Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/23
Fuel Injection Pump Bushings Have New Groove Adjacent To Load Ring {1251}
1996/11/01
Improved Bushing O-Ring Seal Available For Injection Pump Groups{1251}
1997/03/01
Improvements Made To Remanufactured 0R-3008 Fuel Transfer Pump{1256}
1997/03/01
3406C Pump And Governor Changes Provide Improved Oil And Fuel Leak Resistence{7555}
1997/09/15
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Use of 6V6070 Governor Adjusting Tool Group{1250}
Use of 6V6070 Governor Adjusting Tool Group{1250}
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Letter-NACD
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Fuel Transfer Pump
3406B INDUSTRIAL & MARINE ENGINES
Governor
3406B INDUSTRIAL & MARINE ENGINES
Fuel Ratio Control
3406B INDUSTRIAL & MARINE ENGINES
Governor And Fuel Pump Drive Group<BR> (Automatic Timing Advance Unit)
3406B INDUSTRIAL & MARINE ENGINES
Woodward PSG Governor
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
Governor Controls
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
Governor Linkage
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
Governor
3406C INDUSTRIAL & MARINE ENGINES
Governor and Fuel Pump Drive Group
3406C INDUSTRIAL & MARINE ENGINES
Governor Control
3406C INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Service Letter-China
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Service Letter-Asia
Systems Operation
Systems Operation
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Installation And Operation
2301A SPEED CONTROL
Service Letter-APD
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Testing and Adjusting
Testing and Adjusting
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Installation And Operation
2301A SPEED CONTROL
Troubleshooting
Introduction
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem Index
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 1: Fuel Linkage Has Limited Travel, Binds, Or Takes Excessive Force
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 2: Engine Will Not Start
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 3: Engine Will Not Carry Load (Low Power)
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 4: Engine Will Not Decelerate. Engine Will Not Idle.
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 5: Engine Speed Not Constant
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 6: Engine Overspeeds
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 7: Engine Does Not Share Load (For Load Share Units Only)
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 8: Engine Does Not Parallel
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Service Procedures
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Chapter 5. Troubleshooting
2301A SPEED CONTROL
Appendix A. Guide for Handling and Protection of Electronic Controls, Printed Circuit Boards, &amp; Modules
2301A SPEED CONTROL
Appendix B. EMI Controls in Electronic Governing Systems
2301A SPEED CONTROL
Disassembly and Assembly
Fuel Transfer Pump
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump And Governor Drive
3406B INDUSTRIAL & MARINE ENGINES
Fuel Ratio Control
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump And Governor
3406B INDUSTRIAL & MARINE ENGINES
Governor
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump &amp; Governor Drive
3406C INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump &amp; Governor
3406C INDUSTRIAL & MARINE ENGINES
Governor (Industrial Engine)
3406C INDUSTRIAL & MARINE ENGINES
Governor (Marine Engine)
3406C INDUSTRIAL & MARINE ENGINES
Governor
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3406C INDUSTRIAL & MARINE ENGINES
Service Magazine
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
New Valve Assembly And Seal Used In Fuel Transfer Pump{1256}
1984/05/14
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Bonnet Of Fuel Injection Pump Group Now Serviced Separately{1251,1250}
1984/12/10
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
New Tools Available To Service Fuel Injection Nozzles And Adapters {0706,1254}
1985/01/14
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Over Fueling Spring No Longer Used In Governor{1264,1250}
1985/02/04
Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced{1254}
1985/03/18
Special Instruction Available To Salvage Governor Housing{1287}
1985/07/15
Eliminating Interference Between Governor Housing And Tachometer Drive{1264,7487}
1985/08/12
Thread Lock Now Used On Timing Advance Bolts{1272}
1985/08/12
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Fuel Transfer Pump Improved{1256}
1985/10/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Check Fuel Injection Replacement Pump Installation{1251,1253,1257}
1985/10/28
Special Bolts Help Prevent Unauthorized Modification Of Fuel System And Governor Settings{1250,1264,1278,1287}
1985/11/11
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
FT Tooling Prints Available For Bushing Installation In Governor Housing{0600,1287}
1986/05/05
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved Retaining Bushing In Fuel Injection Pump {1251,1250}
1986/12/01
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings{1253}
1991/09/30
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
Major Engine Component Changes{1201,1202,1205,1218,1219,1230,1253,1288,1331}
1992/09/07
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly{1251,1253,1281,1292}
1992/09/21
Fuel Injection Pump Improvements{1251}
1994/02/07
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Engine News
Use New Adapter To Make Tests Of 9L6884 Nozzles
1979/05/09
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Improvements To Optional Modification Of 5P4150 Nozzle Tester
1981/08/26
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used
1984/10/24
New Tools Available To Service Fuel Injection Nozzles And Adapters
1985/01/16
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01
Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced
1985/05/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Gasket Leakage On Aftermarket Fuel Filters
1986/01/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles
1986/10/01
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles
1989/03/01
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque
1989/09/01
New Fuel Line Assemblies And Adapter Assembly Used
1992/02/01
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN)
1992/04/01
Improved 1R-0712 Fuel Filter Available{1261}
1994/03/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/01
Fuel Injection Nozzle Spray Orifice Plugging{1254}
1994/07/01
Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/23
New O-Ring Seals Used On &quot;Through-Head-Adapter&quot; And &quot;Internal Fuel Lines&quot; In Fuel Injection Lines Groups{1252}
1996/11/01
New Fuel Line Support Brackets Help Eliminate Vibration {1252}
1997/12/16
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
Needle Valve May Be Needed To Accurately Measure Engine Return Fuel Flow{1250,0782}
1999/04/01
Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line
1978/07/05
SOLAS Requirements for Fuel Lines {1274}
2003/12/01
Special Instruction
Installation of 9Y3499 Fuel Line Clamps Parts Kit{1252}
Installation of 9Y3499 Fuel Line Clamps Parts Kit{1252}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Service Letter-NACD
Product Support Program For Replacing Cracked Fuel Lines On Certain 3406C Engines Used In Certain Machine, Commercial, Industrial And Marine Applications
Product Support Program For Replacing Cracked Fuel Lines On Certain 3406C Engines Used In Certain Machine, Commercial, Industrial And Marine Applications
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Fuel Injection Lines<BR> (4TB470-UP), (6TB1779-UP)
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzle And Adapter<BR> (4TB470-Up), (6TB1779-Up)
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Lines
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzle And Adapter
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Lines<BR> (Double Walled)
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
Fuel Injection Lines
3406C INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Fuel Filter And Lines
3406C INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Service Letter-China
Product Support Program For Replacing Cracked Fuel Lines On Certain 3406C Engines Used In Certain Machine, Commercial, Industrial And Marine Applications
Product Support Program For Replacing Cracked Fuel Lines On Certain 3406C Engines Used In Certain Machine, Commercial, Industrial And Marine Applications
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Ratio Control
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Lines
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Line Adapters
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzles
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzle Adapters
3406B INDUSTRIAL & MARINE ENGINES
Fuel Ratio Control
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzles (Earlier)
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzle Adapters (Earlier)
3406C INDUSTRIAL & MARINE ENGINES
Service Magazine
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
New Valve Assembly And Seal Used In Fuel Transfer Pump{1256}
1984/05/14
New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used{1101,1106}
1984/10/29
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
New Tools Available To Service Fuel Injection Nozzles And Adapters {0706,1254}
1985/01/14
Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced{1254}
1985/03/18
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Extra Injection Nozzle Clamp Helps Prevent Injection Nozzle Damage{1252}
1985/07/15
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Special Bolts Help Prevent Unauthorized Modification Of Fuel System And Governor Settings{1250,1264,1278,1287}
1985/11/11
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line{1274}
1978/06/26
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
New Fuel Line Assemblies And Adapter Assembly Used{1252}
1992/02/17
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
Engine News
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque
1989/09/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/01
Fuel Injection Nozzle Spray Orifice Plugging{1254}
1994/07/01
New O-Ring Seals Used On &quot;Through-Head-Adapter&quot; And &quot;Internal Fuel Lines&quot; In Fuel Injection Lines Groups{1252}
1996/11/01
New Fuel Line Support Brackets Help Eliminate Vibration {1252}
1997/12/16
Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain Commercial Engines {1250, 1251, 1290, 1713}
2013/10/17
Special Instruction
Installation of 9Y3499 Fuel Line Clamps Parts Kit{1252}
Installation of 9Y3499 Fuel Line Clamps Parts Kit{1252}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Service Letter-NACD
Product Support Program For Replacing Cracked Fuel Lines On Certain 3406C Engines Used In Certain Machine, Commercial, Industrial And Marine Applications
Product Support Program For Replacing Cracked Fuel Lines On Certain 3406C Engines Used In Certain Machine, Commercial, Industrial And Marine Applications
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Fuel Injection Lines<BR> (4TB470-UP), (6TB1779-UP)
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Lines
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Lines<BR> (Double Walled)
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
Fuel Injection Lines
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzle And Adapter
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Lines
3406C INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Service Letter-China
Product Support Program For Replacing Cracked Fuel Lines On Certain 3406C Engines Used In Certain Machine, Commercial, Industrial And Marine Applications
Product Support Program For Replacing Cracked Fuel Lines On Certain 3406C Engines Used In Certain Machine, Commercial, Industrial And Marine Applications
Service Letter-Asia
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Product Support Program For Replacing Cracked Fuel Lines On Certain 3406C Engines Used In Certain Machine, Commercial, Industrial And Marine Applications
Product Support Program For Replacing Cracked Fuel Lines On Certain 3406C Engines Used In Certain Machine, Commercial, Industrial And Marine Applications
Disassembly and Assembly
Fuel Injection Lines
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Line Adapters
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzles
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Lines
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Line Adapters
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzles (Earlier)
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzle Adapters (Earlier)
3406C INDUSTRIAL & MARINE ENGINES
Service Magazine
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used{1101,1106}
1984/10/29
New Tools Available To Service Fuel Injection Nozzles And Adapters {0706,1254}
1985/01/14
Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced{1254}
1985/03/18
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Extra Injection Nozzle Clamp Helps Prevent Injection Nozzle Damage{1252}
1985/07/15
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
New Fuel Line Assemblies And Adapter Assembly Used{1252}
1992/02/17
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Disassembly and Assembly
Fuel Ratio Control
SUPPLEMENT 3406B FUEL RATIO CONTROL
Service Magazine
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Special Bolts Help Prevent Unauthorized Modification Of Fuel System And Governor Settings{1250,1264,1278,1287}
1985/11/11
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
Self-Powered Hour Meters Available{7480,7450}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Engine News
Use New Adapter To Make Tests Of 9L6884 Nozzles
1979/05/09
Fuel Heaters Are Now Available For Field Installation
1980/01/09
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Improvements To Optional Modification Of 5P4150 Nozzle Tester
1981/08/26
Explanation Of Differences In Timing Advance Information
1981/08/26
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers
1986/03/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Changes Have Been Made To 0T Microfiche (Fuel Setting And Related Information)
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Fuel Dilution Troubleshooting Procedure
1987/01/01
Fuel Injection Nozzle Spray Orifice Plugging{1254}
1994/07/01
New Guideline For Product Information, SEBF8340, &quot; Fuel Systems Troubleshooting Guide For 3204, 3300, And 3400 Engines With New Scroll Fuel Systems (NSFS)&quot; Available {0374,1250}
1998/06/01
Needle Valve May Be Needed To Accurately Measure Engine Return Fuel Flow{1250,0782}
1999/04/01
Special Instruction
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Service Letter-NACD
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Service Letter-China
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Service Letter-Asia
Service Letter-APD
Service Magazine
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Correct Wiring And Fuse Must Be Used For Correct Operation Of Shut-Off Solenoid Group{1259}
1984/01/30
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
New Valve Assembly And Seal Used In Fuel Transfer Pump{1256}
1984/05/14
New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used{1101,1106}
1984/10/29
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Bonnet Of Fuel Injection Pump Group Now Serviced Separately{1251,1250}
1984/12/10
Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced{1254}
1985/03/18
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Orifice Fitting Or Snubber Can Help Stop Erratic Fuel Gauge Operation{7456}
1985/06/24
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Special Instruction Available To Salvage Governor Housing{1287}
1985/07/15
Eliminating Interference Between Governor Housing And Tachometer Drive{1264,7487}
1985/08/12
Location Of 6V5135 Setscrews In Fuel Pump Group{1250}
1985/08/12
Thread Lock Now Used On Timing Advance Bolts{1272}
1985/08/12
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Fuel Transfer Pump Improved{1256}
1985/10/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Engine Information Plate Contains More Data; Use Of Performance Specifications{1250,7557}
1985/10/28
Check Fuel Injection Replacement Pump Installation{1251,1253,1257}
1985/10/28
Special Bolts Help Prevent Unauthorized Modification Of Fuel System And Governor Settings{1250,1264,1278,1287}
1985/11/11
Faster Response Water Temperature Regulators; Service Simplified{1350,1355}
1985/11/25
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Three Element Speed Switch Replaces Dual Element Speed Switch{7418,7411,7410,7421}
1986/04/21
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
FT Tooling Prints Available For Bushing Installation In Governor Housing{0600,1287}
1986/05/05
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Fuel Dilution Troubleshooting Procedure{1250}
1986/12/22
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
Diesel Fuel Recommendation Expanded{1280}
1977/02/14
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Improved Fuel Priming Pump Used{1258}
1987/04/20
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line{1274}
1978/06/26
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05
How To Extend The Service Life Of 1P5550 Fuel Cam Locking Tool Assembly{0654,1250}
1979/04/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings{1253}
1992/01/20
New Fuel Line Assemblies And Adapter Assembly Used{1252}
1992/02/17
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
Major Engine Component Changes{1201,1202,1205,1218,1219,1230,1253,1288,1331}
1992/09/07
Engine News
Fuel Injection Nozzle Spray Orifice Plugging{1254}
1994/07/01
Special Instruction
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Fuel Injection Nozzle And Adapter<BR> (4TB470-Up), (6TB1779-Up)
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzle And Adapter
3406B INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
Fuel Injection Line Adapters
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzles
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzle Adapters
3406B INDUSTRIAL & MARINE ENGINES
Service Magazine
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used{1101,1106}
1984/10/29
New Tools Available To Service Fuel Injection Nozzles And Adapters {0706,1254}
1985/01/14
Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced{1254}
1985/03/18
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Special Instruction
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Service Magazine
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Engine News
Use New Adapter To Make Tests Of 9L6884 Nozzles
1979/05/09
Improvements To Optional Modification Of 5P4150 Nozzle Tester
1981/08/26
Explanation Of Differences In Timing Advance Information
1981/08/26
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
Service Information For Woodward Governors
1983/10/26
New Valve Assembly And Seal Used In Fuel Transfer Pump
1984/05/16
New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used
1984/10/24
Bonnet Of Fuel Injection Pump Group Now Serviced Separately
1984/12/12
Fill Oil Sump Before Installing Woodward Governor
1985/01/16
New Tools Available To Service Fuel Injection Nozzles And Adapters
1985/01/16
Over Fueling Spring No Longer Used In Governor
1985/03/01
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01
Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced
1985/05/01
Thread Lock Now Used On Timing Advance Bolts
1985/08/01
Eliminating Interference Between Governor Housing And Tachometer Drive
1985/08/01
Location Of 6V5135 Setscrews In Fuel Pump Group
1985/08/01
Special Instruction Available To Salvage Governor Housing
1985/08/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Fuel Transfer Pump Improved
1985/11/01
Check Fuel Injection Replacement Pump Installation
1985/11/01
Special Bolts Help Prevent Unauthorized Modification Of Fuel System And Governor Settings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
FT Tooling Prints Available For Bushing Installation In Governor Housing
1986/05/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
New Material Used For Disc In Valve Assemblies In Fuel Transfer Pump Groups
1986/09/01
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed
1986/10/01
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles
1986/10/01
Improved Retaining Bushing In Fuel Injection Pump
1986/12/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters
1987/10/01
Improved Valve Mechanism Cover Groups
1988/01/01
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles
1989/03/01
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque
1989/09/01
Corrections For Systems Operation, Troubleshooting, And Specifications For 2301 Electric Governors For Generator Set And Industrial Engines, SENR2928-01
1991/05/01
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings
1991/10/01
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings
1992/01/01
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN)
1992/04/01
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks
1992/08/01
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly
1992/09/01
Fuel Injection Pump Improvements{1251}
1994/02/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/01
Fuel Injection Nozzle Spray Orifice Plugging{1254}
1994/07/01
New Seals In Pump Fastener Group And Fuel Injection Pump Group Have Improved Heat Set Resistance {1251}
1994/09/01
Fuel Injection Pump Barrel Sealing Face Reconditioning{1251}
1996/03/19
New Governor Weight And Race Increase Durability {1264}
1996/09/23
Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/23
Fuel Injection Pump Bushings Have New Groove Adjacent To Load Ring {1251}
1996/11/01
New O-Ring Seals Used On &quot;Through-Head-Adapter&quot; And &quot;Internal Fuel Lines&quot; In Fuel Injection Lines Groups{1252}
1996/11/01
Improved Bushing O-Ring Seal Available For Injection Pump Groups{1251}
1997/03/01
Improvements Made To Remanufactured 0R-3008 Fuel Transfer Pump{1256}
1997/03/01
3406C Pump And Governor Changes Provide Improved Oil And Fuel Leak Resistence{7555}
1997/09/15
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Troubleshooting Engines with Mechanical Unit Injection (MUI) {1000, 1254}
2006/01/02
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Improved Manufacturing Processes Are Used for Remanufactured Fuel Injector Nozzles That Are Used in Certain Commercial Engines {1251, 1290}
2012/07/06
Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain Commercial Engines {1250, 1251, 1290, 1713}
2013/10/17
Cat&reg; Reman Announces New Fuel Pump, Fuel Ratio Control, and Fuel Injector Options for Certain Engines {1251, 1278}
2014/09/05
Special Instruction
Use of 6V6070 Governor Adjusting Tool Group{1250}
Use of 6V6070 Governor Adjusting Tool Group{1250}
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
3406 New Scroll Fuel System (NSFS) Camshaft Plugs{1110}
3406 New Scroll Fuel System (NSFS) Camshaft Plugs{1110}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Valve Bonnets with Insufficient Hardness
Valve Bonnets with Insufficient Hardness
Specifications
Fuel Injection Nozzle And Adapter<BR> (4TB470-Up), (6TB1779-Up)
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzle And Adapter
3406B INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3406B INDUSTRIAL & MARINE ENGINES
Governor And Fuel Pump Drive Group<BR> (Automatic Timing Advance Unit)
3406B INDUSTRIAL & MARINE ENGINES
Woodward PSG Governor
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
Governor Controls
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
Governor Linkage
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
Fuel Injection Nozzle And Adapter
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3406C INDUSTRIAL & MARINE ENGINES
Governor and Fuel Pump Drive Group
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Lines
3406C INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Governor Control
3406C INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Fuel Transfer Pump
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump And Governor Drive
3406B INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Line Adapters
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump And Governor
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3406B INDUSTRIAL & MARINE ENGINES
Rocker Shaft Assemblies
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzles
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzle Adapters
3406B INDUSTRIAL & MARINE ENGINES
Service Meter
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump &amp; Governor Drive
3406C INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump &amp; Governor
3406C INDUSTRIAL & MARINE ENGINES
Governor (Industrial Engine)
3406C INDUSTRIAL & MARINE ENGINES
Governor (Marine Engine)
3406C INDUSTRIAL & MARINE ENGINES
Governor
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzles (Earlier)
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzle Adapters (Earlier)
3406C INDUSTRIAL & MARINE ENGINES
Service Magazine
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
New Valve Assembly And Seal Used In Fuel Transfer Pump{1256}
1984/05/14
New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used{1101,1106}
1984/10/29
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Bonnet Of Fuel Injection Pump Group Now Serviced Separately{1251,1250}
1984/12/10
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
New Tools Available To Service Fuel Injection Nozzles And Adapters {0706,1254}
1985/01/14
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Over Fueling Spring No Longer Used In Governor{1264,1250}
1985/02/04
Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced{1254}
1985/03/18
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Extra Injection Nozzle Clamp Helps Prevent Injection Nozzle Damage{1252}
1985/07/15
Eliminating Interference Between Governor Housing And Tachometer Drive{1264,7487}
1985/08/12
Location Of 6V5135 Setscrews In Fuel Pump Group{1250}
1985/08/12
Thread Lock Now Used On Timing Advance Bolts{1272}
1985/08/12
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Fuel Transfer Pump Improved{1256}
1985/10/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Check Fuel Injection Replacement Pump Installation{1251,1253,1257}
1985/10/28
Special Bolts Help Prevent Unauthorized Modification Of Fuel System And Governor Settings{1250,1264,1278,1287}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved Retaining Bushing In Fuel Injection Pump {1251,1250}
1986/12/01
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings{1253}
1991/09/30
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings{1253}
1992/01/20
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks{1201,1253}
1992/08/31
Major Engine Component Changes{1201,1202,1205,1218,1219,1230,1253,1288,1331}
1992/09/07
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly{1251,1253,1281,1292}
1992/09/21
Camshaft Lobe Surface Finish Improved; Camshaft Drive Gear Installation Procedure {1209,1210,1212}
1993/09/13
Fuel Injection Pump Improvements{1251}
1994/02/07
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Engine News
Location Of 6V5135 Setscrews In Fuel Pump Group
1985/08/01
Improved Fuel Priming Pump Used
1987/05/01
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
An Improved Fuel Priming Pump Gasket Is Now Used on Certain Commercial Engines {1258, 7555}
2011/06/08
Special Instruction
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSTALLING A HAND PRIMING FUEL PUMP ON CERTAIN C7, C9, C10, C11, C12, C13, C15, C16, C18, C30, C32, E90 3126, 3176, 3196, 3456, 3406, G3406, 3408 AND 3412 ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING A HAND PRIMING FUEL PUMP ON CERTAIN C7, C9, C10, C11, C12, C13, C15, C16, C18, C30, C32, E90 3126, 3176, 3196, 3456, 3406, G3406, 3408 AND 3412 ENGINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Priming Pump
3406B INDUSTRIAL & MARINE ENGINES
Fuel Priming Pump
3406C INDUSTRIAL & MARINE ENGINES
Service Magazine
New Valve Assembly And Seal Used In Fuel Transfer Pump{1256}
1984/05/14
Fuel Transfer Pump Improved{1256}
1985/10/14
Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
Improved Fuel Priming Pump Used{1258}
1987/04/20
Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line{1274}
1978/06/26
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
Special Instruction, REHS1037 , "Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System" has been Revised {1258}
2004/03/29
Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Service Information For Woodward Governors
1983/10/26
New Valve Assembly And Seal Used In Fuel Transfer Pump
1984/05/16
Bonnet Of Fuel Injection Pump Group Now Serviced Separately
1984/12/12
Fill Oil Sump Before Installing Woodward Governor
1985/01/16
Over Fueling Spring No Longer Used In Governor
1985/03/01
Thread Lock Now Used On Timing Advance Bolts
1985/08/01
Eliminating Interference Between Governor Housing And Tachometer Drive
1985/08/01
Location Of 6V5135 Setscrews In Fuel Pump Group
1985/08/01
Special Instruction Available To Salvage Governor Housing
1985/08/01
Fuel Transfer Pump Improved
1985/11/01
Check Fuel Injection Replacement Pump Installation
1985/11/01
Special Bolts Help Prevent Unauthorized Modification Of Fuel System And Governor Settings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
FT Tooling Prints Available For Bushing Installation In Governor Housing
1986/05/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
New Material Used For Disc In Valve Assemblies In Fuel Transfer Pump Groups
1986/09/01
Improved Retaining Bushing In Fuel Injection Pump
1986/12/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters
1987/10/01
Corrections For Systems Operation, Troubleshooting, And Specifications For 2301 Electric Governors For Generator Set And Industrial Engines, SENR2928-01
1991/05/01
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings
1991/10/01
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings
1992/01/01
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks
1992/08/01
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly
1992/09/01
Fuel Injection Pump Improvements{1251}
1994/02/01
New Seals In Pump Fastener Group And Fuel Injection Pump Group Have Improved Heat Set Resistance {1251}
1994/09/01
New Governor Weight And Race Increase Durability {1264}
1996/09/23
Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/23
Fuel Injection Pump Bushings Have New Groove Adjacent To Load Ring {1251}
1996/11/01
Improved Bushing O-Ring Seal Available For Injection Pump Groups{1251}
1997/03/01
Improvements Made To Remanufactured 0R-3008 Fuel Transfer Pump{1256}
1997/03/01
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Special Instruction
Use of 6V6070 Governor Adjusting Tool Group{1250}
Use of 6V6070 Governor Adjusting Tool Group{1250}
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Specifications
Fuel Transfer Pump
3406B INDUSTRIAL & MARINE ENGINES
Governor And Fuel Pump Drive Group<BR> (Automatic Timing Advance Unit)
3406B INDUSTRIAL & MARINE ENGINES
Woodward PSG Governor
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
Governor Controls
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
Governor Linkage
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
Fuel Transfer Pump
3406C INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
Fuel Transfer Pump
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump And Governor Drive
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump And Governor
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3406B INDUSTRIAL & MARINE ENGINES
Service Magazine
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
New Valve Assembly And Seal Used In Fuel Transfer Pump{1256}
1984/05/14
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Bonnet Of Fuel Injection Pump Group Now Serviced Separately{1251,1250}
1984/12/10
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Over Fueling Spring No Longer Used In Governor{1264,1250}
1985/02/04
Eliminating Interference Between Governor Housing And Tachometer Drive{1264,7487}
1985/08/12
Location Of 6V5135 Setscrews In Fuel Pump Group{1250}
1985/08/12
Fuel Transfer Pump Improved{1256}
1985/10/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Check Fuel Injection Replacement Pump Installation{1251,1253,1257}
1985/10/28
Special Bolts Help Prevent Unauthorized Modification Of Fuel System And Governor Settings{1250,1264,1278,1287}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved Retaining Bushing In Fuel Injection Pump {1251,1250}
1986/12/01
Improved Fuel Priming Pump Used{1258}
1987/04/20
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
Check Fuel Injection Replacement Pump Installation{1251,1253,1257}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Faster Response Water Temperature Regulators; Service Simplified{1350,1355}
1985/11/25
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Engine News
Correct Wiring And Fuse Must Be Used For Correct Operation Of Shut-Off Solenoid Group
1984/02/22
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Service Letter-NACD
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Replacing Solenoid Assemblies On Certain 3406C Commercial Engines
Product Support Program For Replacing Solenoid Assemblies On Certain 3406C Commercial Engines
Service Letter-Australia
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Replacing Solenoid Assemblies On Certain 3406C Commercial Engines
Product Support Program For Replacing Solenoid Assemblies On Certain 3406C Commercial Engines
Service Letter-CFEL
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Replacing Solenoid Assemblies On Certain 3406C Commercial Engines
Product Support Program For Replacing Solenoid Assemblies On Certain 3406C Commercial Engines
Service Letter-CSARL
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Replacing Solenoid Assemblies On Certain 3406C Commercial Engines
Product Support Program For Replacing Solenoid Assemblies On Certain 3406C Commercial Engines
Service Letter-Americas
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Replacing Solenoid Assemblies On Certain 3406C Commercial Engines
Product Support Program For Replacing Solenoid Assemblies On Certain 3406C Commercial Engines
Service Letter-Truck/Ag/Marine
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Service Letter-China
Product Support Program For Replacing Solenoid Assemblies On Certain 3406C Commercial Engines
Product Support Program For Replacing Solenoid Assemblies On Certain 3406C Commercial Engines
Service Letter-Asia
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Replacing Solenoid Assemblies On Certain 3406C Commercial Engines
Product Support Program For Replacing Solenoid Assemblies On Certain 3406C Commercial Engines
Service Letter-APD
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Replacing Solenoid Assemblies On Certain 3406C Commercial Engines
Product Support Program For Replacing Solenoid Assemblies On Certain 3406C Commercial Engines
Service Magazine
Correct Wiring And Fuse Must Be Used For Correct Operation Of Shut-Off Solenoid Group{1259}
1984/01/30
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Three Element Speed Switch Replaces Dual Element Speed Switch{7418,7411,7410,7421}
1986/04/21
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Engine News
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Engine News
How To Extend The Service Life Of 1P5550 Fuel Cam Locking Tool Assembly
1979/04/25
Changes To 9S240 Rack Position Tool Group; Revision To Special Instructions
1980/05/14
Improvements To Optional Modification Of 5P4150 Nozzle Tester
1981/08/26
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach
1982/05/12
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
Service Information For Easier Use Of The 6V3100 Timing Indicator Group
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
New Service Centers For 6V3100 Engine Timing Indicator Group
1983/10/26
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines
1984/04/11
New Tools Available To Service Fuel Injection Nozzles And Adapters
1985/01/16
Fuel Sulfur Analyzer Available
1986/01/01
New Engine Timing Indicator Group Available
1986/07/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups
1987/03/01
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts
1991/01/01
Tool Operating Manual
Install and Test Fuel Injection Pumps Used on 3406B, 3406C, and 3406 PEEC Engines Using the 4C-8192 Heavy-Duty Coupling Group on the Fuel Injection Equipment Test Stand{1251}
Install and Test Fuel Injection Pumps Used on 3406B, 3406C, and 3406 PEEC Engines Using the 4C-8192 Heavy-Duty Coupling Group on the Fuel Injection Equipment Test Stand{1251}
Service Magazine
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
New Tools Available To Service Fuel Injection Nozzles And Adapters {0706,1254}
1985/01/14
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
Fabricated Extension Prevents Fuel &quot;Splash&quot; During Injection Valve Testing{0650,1254}
1977/10/17
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
5P4149 Conversion Group To Become A Discontinued Item On October 1, 1978{0650,1254}
1978/03/27
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New 5P8744 Adapter Assembly And Special Instruction Procedures For 5P4150 Nozzle Tester Group{0650}
1978/08/28
4J7533 O-Ring Seals Now Available For Parts Service Of The 5P4150 Nozzle Tester Group{0651}
1978/10/09
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Improved Pressure Gauge Sender Used{7450,7485}
1988/11/21
How To Extend The Service Life Of 1P5550 Fuel Cam Locking Tool Assembly{0654,1250}
1979/04/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
6V183 Gasket Now Available For Parts Service To Use On 5P4150 Or 8S2242 Nozzle Tester{0651}
1979/06/25
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
Check Fuel Injection Replacement Pump Installation{1251,1253,1257}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08

Truck sale:

1990 CAT 3406B
USD $25,000 
1990 CAT 3406B

Power Generation Enterprises Inc.
North Hollywood, California
1991 CAT 3406B
USD $22,000 
1991 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
1989 CAT 3406B
USD $35,000 
1989 CAT 3406B

Worldwide Power Products LLC
Houston, Texas
1988 CAT 3406B
USD $29,000 
1988 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
CATERPILLAR 3406B 1988
$29,000 USD 
CATERPILLAR 3406B 1988
- MARINE - PROPULSION
RANSOME ENGINE POWER
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.