AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2W1007 FUEL RATIO CONTROL GP S/N 4TB1-368 4W1842-PAGE 96 3406B MARINE ENGINE


FUEL SYSTEM
GOVERNOR GP
CONTROL GP-FUEL RATIO
GOVERNOR GP
CONTROL GP-FUEL
GOVERNOR GP
LINES GP-FUEL

MARINE ENGINE 3406B MARINE ENGINE 4TB
 3406B MARINE ENGINE 4TB00001-03481 SEBP1429 3406B 4TB   (1983)

FUEL SYSTEM

GOVERNOR GP
CONTROL GP-GOVERNOR
5N-9337 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
4N-3834 CONTROL GP-GOVERNOR
CONTROL GP-FUEL RATIO
2W-1007 CONTROL GP-FUEL RATIO
CONTROL GP-FUEL RATIO
2W-1007 CONTROL GP-FUEL RATIO
CONTROL GP-FUEL RATIO
2W-1007 CONTROL GP-FUEL RATIO
CONTROL GP-FUEL RATIO
4W-1842 CONTROL GP-FUEL RATIO
 

#SEBP14290320
 

2W-1007: CONTROL GP-FUEL RATIO

2W1007 FUEL RATIO CONTROL GP
S/N 4TB1-368
4W1842-PAGE 96
c310747 SEBP1429
2W1007 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your 3406B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-1842 CY [1] CONTROL GP-FUEL RATIO  
2. 6V-5894 [2] BOLT  
3. 5P-0537 [2] WASHER  
4. 2D-6392 [1] SEAL-O-RING  
5. 8N-6680 [1] SCREEN AS  
6. 030-7946 [1] ELBOW  
7. 3J-7354 [1] SEAL-O-RING  
8. 2W-1934 [1] TUBE AS  
9. 8L-6557 [1] CONNECTOR  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14290321
 

2W-1007: CONTROL GP-FUEL RATIO

2W1007 FUEL RATIO CONTROL GROUP
S/N 4TB369-533
4W6117-PAGE 96A
c312810 SEBP1429
2W1007 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your 3406B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-6117 CY [1] CONTROL GP-FUEL  
2. 6V-5894 [2] BOLT  
3. 5P-0537 [2] WASHER  
4. 2D-6392 [1] SEAL-O-RING  
5. 8N-6680 [1] SCREEN AS  
6. 030-7946 [1] ELBOW  
7. 3J-7354 [1] SEAL-O-RING  
8. 2W-1934 [1] TUBE AS  
9. 8L-6557 [1] CONNECTOR  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14290322
 

2W-1007: CONTROL GP-FUEL RATIO

2W1007 CONTROL GP-FUEL RATIO
S/N 4TB534-2015
7W2831-PAGE 96B
c480224 SEBP1429
2W1007 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your 3406B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-2831 CRY [1] CONTROL GP-FUEL RATIO  
2. 6V-5894 [2] BOLT  
3. 5P-0537 [2] WASHER  
4. 2D-6392 [1] SEAL-O-RING  
5. 8N-6680 [1] SCREEN AS  
6. 030-7946 [1] ELBOW  
7. 3J-7354 [1] SEAL-O-RING  
8. 7C-6644 [1] TUBE AS  
9. 8L-6557 [1] CONNECTOR  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14290323
 

7W-3935: LINES GP-FUEL RATIO CONTROL

7W3935 LINES GP-AIR FUEL RATIO CONTROL
S/N 4TB2016-UP
c603050 SEBP1429
7W3935 LINES GP-FUEL RATIO CONTROL Parts scheme
  For full view, you need register

Parts for your 3406B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2N-1287 [1] ELBOW-FLARED  
2. 123-2886 [1] TUBE AS  
3. 030-7946 [1] ELBOW  
4. 3J-7354 [1] SEAL-O-RING  
 

#SEBP14290324
 

4W-1842: CONTROL GP-FUEL RATIO

4W1842 FUEL RATIO CONTROL GROUP
S/N 4TB1-368
PART OF 2W1007 FUEL RATIO CONTROL
c310749 SEBP1429
4W1842 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your 3406B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-4201 [1] NUT-FULL  
2. 2W-9315 [2] WASHER-SPRING  
3. 7N-9215 [1] STOP-ADJUSTABLE  
4. 3S-4701 [1] NUT  
5. 7N-9160 [1] SPRING  
6. 7N-8502 [1] COVER  
7. 7N-9216 [1] WASHER  
8. 7N-9062 [1] HOUSING  
9. 8N-5763 [1] SEAL  
10. 8N-5764 [1] PISTON  
11. 8F-4610 [1] RING-RETAINING  
12. 2A-5546 [2] BOLT  
13. 5P-0537 [4] WASHER  
14. 5P-6945 [2] BOLT  
15. 1W-2076 [1] COVER  
16. 2W-9316 [1] VALVE AS  
17. 7N-9036 [1] VALVE-INTERNAL  
18. 8N-5765 [1] SPRING  
19. 7N-9035 [1] RETAINER  
20. 7N-8316 [1] EXTENSION-VALVE  
21. 4W-1038 [1] SPRING  
22. 9N-1754 [1] SPRING  
23. 4W-1034 [1] DIAPHRAGM  
24. 7J-0204 [1] SEAL-O-RING  
25. 7N-9033 [1] GASKET  
26. 4W-0924 [1] RETAINER  
27. 6V-2689 [1] TUBE-SHRINKABLE .007M(.28IN)  
 

#SEBP14290325
 

4W-6117: CONTROL GP-FUEL

4W6117 FUEL RATIO CONTROL GROUP
S/N 4TB369-533
PART OF 2W1007 FUEL RATIO CONTROL
c707202 SEBP1429
4W6117 CONTROL GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3406B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-4201 [1] NUT-FULL (1/4-28 THD)  
2. 2W-9315 [2] WASHER-SPRING  
3. 7N-9215 [1] STOP-ADJUSTMENT  
4. 3S-4701 [1] NUT  
5. 7N-9160 [1] SPRING  
6. 7N-8502 [1] COVER  
7. 7N-9216 [1] WASHER  
8. 7N-9062 [1] HOUSING  
9. 8N-5763 [1] SEAL  
10. 8N-5764 [1] PISTON  
11. 8F-4610 [1] RING-RETAINING  
12. 2A-5546 [2] BOLT (1/4-20X1.375IN)  
13. 5P-0537 [4] WASHER (2MM THK)  
14. 5P-6945 [2] BOLT (1/4-20X1.25IN)  
15. 1W-2076 [1] COVER  
16. 2W-9316 [1] VALVE AS  
17. 7N-9036 [1] VALVE-INTERNAL  
18. 8N-5765 [1] SPRING  
19. 7N-9035 [1] RETAINER  
20. 7W-2015 [1] EXTENSION-VALVE  
21. 7N-9159 [1] SPRING  
22. 9N-1754 [1] SPRING  
23. 4W-1034 [1] DIAPHRAGM  
24. 7J-0204 [1] SEAL-O-RING (7.65MM ID)  
25. 7N-9033 [1] GASKET  
26. 4W-0924 [1] RETAINER  
27. 6V-2689 D TUBE-SHRINKABLE (.007M)  
  D   ORDER BY THE METER
 

#SEBP14290326
 

7W-2831: CONTROL GP-FUEL RATIO

7W2831 CONTROL GP-FUEL RATIO*R
S/N 4TB534-UP
PART OF 2W1007 FUEL RATIO CONTROL, 7W6071, 2W6193,
8N9675 PUMP-GOVERNOR & FUEL INJECTION
c632943 SEBP1429
7W2831 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your 3406B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-8748 [1] NUT-FULL  
2. 2W-9315 [2] WASHER-SPRING  
3. 5P-8210 [1] SEAL-O-RING  
4. 4W-0924 [1] RETAINER  
5. 7W-2826 [1] SPRING  
6. 4P-7275 [1] COVER  
7. 106-6493 [1] WASHER  
8. 7N-9062 [1] HOUSING  
9. 8N-5763 [1] SEAL  
10. 8N-5764 [1] PISTON  
11. 8F-4610 [1] RING-RETAINING  
12. 2A-5546 [2] BOLT  
13. 5P-0537 [4] WASHER  
14. 5P-6945 [2] BOLT  
15. 4P-7274 [1] COVER  
16. 2W-9316 [1] VALVE AS  
17. 7N-9036 [1] VALVE-INTERNAL  
18. 8N-5765 [1] SPRING  
19. 7N-9035 [1] RETAINER  
20. 7W-2015 [1] EXTENSION-VALVE  
21. 7W-2828 [1] SPRING  
22. 9N-1754 [1] SPRING  
23. 6I-1564 [1] DIAPHRAGM  
24. 3E-6760 [1] SEAL-O-RING  
25. 115-3358 [1] WASHER  
 

#SEBP14290327
 

1W-0557: LINES GP-FUEL INJECTION

1W0557 LINES GP-FUEL INJECTION
S/N 4TB1-646
2W3776 & 2W3777-PAGE 98
c323697 SEBP1429
1W0557 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-3776 Y [1] LINES GP-FUEL INJECTION  
2. 2W-3777 Y [1] LINES GP-FUEL INJECTION  
3. 4N-1292 [6] LOCK-ADAPTER  
4. 4N-1797 [6] ADAPTER AS  
    (EACH INCLUDES)
5. 8M-4437 [1] SEAL-O-RING  
6. 8N-7007 C [6] NOZZLE AS-FUEL VALVE  
    (EACH INCLUDES)
7. 9L-9098 [1] SEAL-CARBON STOP  
8. 2W-4693 [1] WASHER  
9. 2W-1230 [1] SCREW-BUTTON HEAD  
10. 8T-0659 [1] WASHER-SEALING  
11. 8H-9204 [6] WASHER-FELT  
12. 2W-2063 [6] PLUG-NOZZLE  
13. 4W-9352 C [6] LINE AS-FUEL INJ  
    (EACH INCLUDES)
14. 1H-1023 [1] SEAL-O-RING  
15. 1T-0416 [6] BOLT  
16. 7W-1997 C [6] CLAMP-DIRECT INJ NOZZLE  
17. 9L-9814 [6] NUT-SELF LOCKING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14290328
 

1W-0557: LINES GP-FUEL INJECTION

1W0557 LINES GP-FUEL INJECTION
S/N 4TB647-681
4W7017-PAGE 100, 2W3776 & 2W3777-PAGE 98
c325450 SEBP1429
1W0557 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-3776 Y [1] LINES GP-FUEL INJECTION  
2. 2W-3777 Y [1] LINES GP-FUEL INJECTION  
3. 4N-1292 [6] LOCK-ADAPTER  
4. 4N-1797 [6] ADAPTER AS  
    (EACH INCLUDES)
5. 8M-4437 [1] SEAL-O-RING  
6. 4W-7017 CYR [6] NOZZLE AS-FUEL VALVE  
7. 7W-2315 C [6] RETAINER  
8. 9L-9814 [6] NUT-SELF LOCKING  
9. 4W-9352 [6] LINE AS-FUEL INJ  
    (EACH INCLUDES)
10. 1H-1023 [1] SEAL-O-RING  
11. 8H-9204 [6] WASHER-FELT  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14290329
 

1W-0557: LINES GP-FUEL INJECTION

1W0557 LINES GP-FUEL INJECTION
S/N 4TB682-842
4W7017-PAGE 100, 7W8627 & 7W8628-PAGE 98.01
c346181 SEBP1429
1W0557 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-8627 CY [1] LINES GP-FUEL INJECTION  
2. 7W-8628 CY [1] LINES GP-FUEL INJECTION  
3. 4N-1292 [6] LOCK-ADAPTER  
4. 4N-1797 [6] ADAPTER AS  
    (EACH INCLUDES)
5. 8M-4437 [1] SEAL-O-RING  
6. 4W-7017 YR [6] NOZZLE AS-FUEL VALVE  
7. 7W-2315 [6] RETAINER  
8. 9L-9814 [6] NUT-SELF LOCKING  
9. 7W-8629 C [6] LINE AS-FUEL INJ  
    (EACH INCLUDES)
10. 1H-1023 [1] SEAL-O-RING  
11. 8H-9204 [6] WASHER-FELT  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
Service Information For Woodward Governors
1983/10/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
New Valve Assembly And Seal Used In Fuel Transfer Pump
1984/05/16
Bonnet Of Fuel Injection Pump Group Now Serviced Separately
1984/12/12
Fill Oil Sump Before Installing Woodward Governor
1985/01/16
Over Fueling Spring No Longer Used In Governor
1985/03/01
Thread Lock Now Used On Timing Advance Bolts
1985/08/01
Eliminating Interference Between Governor Housing And Tachometer Drive
1985/08/01
Special Instruction Available To Salvage Governor Housing
1985/08/01
Fuel Transfer Pump Improved
1985/11/01
Check Fuel Injection Replacement Pump Installation
1985/11/01
Special Bolts Help Prevent Unauthorized Modification Of Fuel System And Governor Settings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct
1986/05/01
FT Tooling Prints Available For Bushing Installation In Governor Housing
1986/05/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
New Material Used For Disc In Valve Assemblies In Fuel Transfer Pump Groups
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Improved Retaining Bushing In Fuel Injection Pump
1986/12/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters
1987/10/01
Corrections For Systems Operation, Troubleshooting, And Specifications For 2301 Electric Governors For Generator Set And Industrial Engines, SENR2928-01
1991/05/01
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings
1991/10/01
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings
1992/01/01
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks
1992/08/01
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly
1992/09/01
Fuel Injection Pump Improvements{1251}
1994/02/01
New Seals In Pump Fastener Group And Fuel Injection Pump Group Have Improved Heat Set Resistance {1251}
1994/09/01
Governor Spring Guide Press Depth {1287,1284}
1996/01/17
New Governor Weight And Race Increase Durability {1264}
1996/09/23
Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/23
Fuel Injection Pump Bushings Have New Groove Adjacent To Load Ring {1251}
1996/11/01
Improved Bushing O-Ring Seal Available For Injection Pump Groups{1251}
1997/03/01
Improvements Made To Remanufactured 0R-3008 Fuel Transfer Pump{1256}
1997/03/01
3406C Pump And Governor Changes Provide Improved Oil And Fuel Leak Resistence{7555}
1997/09/15
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Use of 6V6070 Governor Adjusting Tool Group{1250}
Use of 6V6070 Governor Adjusting Tool Group{1250}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Letter-NACD
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Fuel Transfer Pump
3406B INDUSTRIAL & MARINE ENGINES
Governor
3406B INDUSTRIAL & MARINE ENGINES
Fuel Ratio Control
3406B INDUSTRIAL & MARINE ENGINES
Governor And Fuel Pump Drive Group<BR> (Automatic Timing Advance Unit)
3406B INDUSTRIAL & MARINE ENGINES
Woodward PSG Governor
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
Governor Controls
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
Governor Linkage
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
Governor
3406C INDUSTRIAL & MARINE ENGINES
Governor and Fuel Pump Drive Group
3406C INDUSTRIAL & MARINE ENGINES
Governor Control
3406C INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Service Letter-China
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Service Letter-Asia
Systems Operation
Systems Operation
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Installation And Operation
2301A SPEED CONTROL
Service Letter-APD
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Testing and Adjusting
Testing and Adjusting
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Installation And Operation
2301A SPEED CONTROL
Troubleshooting
Introduction
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem Index
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 1: Fuel Linkage Has Limited Travel, Binds, Or Takes Excessive Force
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 2: Engine Will Not Start
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 3: Engine Will Not Carry Load (Low Power)
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 4: Engine Will Not Decelerate. Engine Will Not Idle.
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 5: Engine Speed Not Constant
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 6: Engine Overspeeds
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 7: Engine Does Not Share Load (For Load Share Units Only)
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 8: Engine Does Not Parallel
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Service Procedures
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Chapter 5. Troubleshooting
2301A SPEED CONTROL
Appendix A. Guide for Handling and Protection of Electronic Controls, Printed Circuit Boards, &amp; Modules
2301A SPEED CONTROL
Appendix B. EMI Controls in Electronic Governing Systems
2301A SPEED CONTROL
Disassembly and Assembly
Fuel Transfer Pump
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump And Governor Drive
3406B INDUSTRIAL & MARINE ENGINES
Fuel Ratio Control
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump And Governor
3406B INDUSTRIAL & MARINE ENGINES
Governor
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump &amp; Governor Drive
3406C INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump &amp; Governor
3406C INDUSTRIAL & MARINE ENGINES
Governor (Industrial Engine)
3406C INDUSTRIAL & MARINE ENGINES
Governor (Marine Engine)
3406C INDUSTRIAL & MARINE ENGINES
Governor
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3406C INDUSTRIAL & MARINE ENGINES
Service Magazine
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
New Valve Assembly And Seal Used In Fuel Transfer Pump{1256}
1984/05/14
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Bonnet Of Fuel Injection Pump Group Now Serviced Separately{1251,1250}
1984/12/10
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
New Tools Available To Service Fuel Injection Nozzles And Adapters {0706,1254}
1985/01/14
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Over Fueling Spring No Longer Used In Governor{1264,1250}
1985/02/04
Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced{1254}
1985/03/18
Special Instruction Available To Salvage Governor Housing{1287}
1985/07/15
Eliminating Interference Between Governor Housing And Tachometer Drive{1264,7487}
1985/08/12
Thread Lock Now Used On Timing Advance Bolts{1272}
1985/08/12
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Fuel Transfer Pump Improved{1256}
1985/10/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Check Fuel Injection Replacement Pump Installation{1251,1253,1257}
1985/10/28
Special Bolts Help Prevent Unauthorized Modification Of Fuel System And Governor Settings{1250,1264,1278,1287}
1985/11/11
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
FT Tooling Prints Available For Bushing Installation In Governor Housing{0600,1287}
1986/05/05
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved Retaining Bushing In Fuel Injection Pump {1251,1250}
1986/12/01
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings{1253}
1991/09/30
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
Major Engine Component Changes{1201,1202,1205,1218,1219,1230,1253,1288,1331}
1992/09/07
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly{1251,1253,1281,1292}
1992/09/21
Fuel Injection Pump Improvements{1251}
1994/02/07

Caterpillar Parts SIS Catalog 3406B :

3N-9081 MOUNTING GP-GOVERNOR CONTROL
ACTUATOR GP-AIR
5N-3220 ACTUATOR GP-AIR
CONTROL GP-VOLTAGE
5N-9174 CONTROL GP-VOLTAGE
CONTROL GP-VOLTAGE
5N-9175 CONTROL GP-VOLTAGE
CONTROL GP-GOVERNOR
4N-3834 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
5N-9337 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
4N-3828 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
4N-3830 CONTROL GP-GOVERNOR
CONTROL GP-FUEL RATIO
2W-1007 CONTROL GP-FUEL RATIO
CONTROL GP-FUEL RATIO
2W-1007 CONTROL GP-FUEL RATIO
LINES GP-FUEL RATIO CONTROL
7W-3935 LINES GP-FUEL RATIO CONTROL
CONTROL GP-FUEL RATIO
4W-1842 CONTROL GP-FUEL RATIO
CONTROL GP-FUEL
4W-6117 CONTROL GP-FUEL
CONTROL GP-FUEL RATIO
7W-2831 CONTROL GP-FUEL RATIO
LINES GP-FUEL INJECTION
1W-0557 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
1W-0557 LINES GP-FUEL INJECTION

Truck sale:

1990 CAT 3406B
USD $25,000 
1990 CAT 3406B

Power Generation Enterprises Inc.
North Hollywood, California
1991 CAT 3406B
USD $22,000 
1991 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
1989 CAT 3406B
USD $35,000 
1989 CAT 3406B

Worldwide Power Products LLC
Houston, Texas
1988 CAT 3406B
USD $29,000 
1988 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
CATERPILLAR 3406B 1988
$29,000 USD 
CATERPILLAR 3406B 1988
- MARINE - PROPULSION
RANSOME ENGINE POWER
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.