3G1620 RIPPER ARRANGEMENT RIPPER S/N 63Y1-UP PART OF 1U4453 RIPPER AR 953 TRACK LOADER

Part No	Qty	Parts name


3G-1349 Y	[1]	RIPPER MOUNTING GP

3G-5128 Y	[1]	MOUNTING & RIPPER CYLINDER GP

1U-4454 Y	[1]	RIPPER LINES GP

9J-4329 Y	[1]	RIPPER GP

8M-3494	[1]	PLATE-SERIAL NO.

4B-4158	[2]	DRIVE SCREW

6V-1545	[1]	FILM
Y		SEPARATE ILLUSTRATION

#SEBP14310462

1U-4453: RIPPER AR

RIPPER AR

1U4453 RIPPER AR
TYPE 1
AN ATTACHMENT

SEBP14310462 SEBP1431

For full view, you need register

Parts for your 953 TRACK LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name


3G-1620 Y	[1]	RIPPER AR

3G-1349 Y	[1]	RIPPER MOUNTING GP

3G-5128 Y	[1]	MOUNTING AND RIPPER CYLINDER GP

1U-4454 Y	[1]	RIPPER LINES GP

6V-1545	[1]	FILM
Y		SEPARATE ILLUSTRATION

#SEBP14310463

4V-5310: BUCKET AS-GENERAL PURPOSE

BUCKET AS-GENERAL PURPOSE

4V5310 GENERAL PURPOSE BUCKET ASSEMBLY
1.5 M3 (20 YD 3) 2425 MM (95.47 IN) WIDE
NOTE: 1U1896 LONG WEARING END BIT IS AVAILABLE
AN ATTACHMENT

c327069 SEBP1431

4V5310 BUCKET AS-GENERAL PURPOSE Parts scheme

For full view, you need register

Parts for your 953 TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4V-4807	[1]	HINGE AS-OUTER (L.H. OUTER)
	4K-8479	[1]	STUD-WELD
2.	4V-4808	[1]	HINGE AS-LH (L.H. INNER)
	4K-8479	[1]	STUD-WELD
3.	4V-4802	[1]	HINGE AS (L.H. CENTER)
4.	4V-4803	[1]	HINGE AS (R.H. CENTER)
5.	4V-4809	[1]	HINGE AS-RH (R.H. INNER)
	4K-8479	[1]	STUD-WELD
6.		[1]	HINGE AS (R.H. OUTER)
	4K-8479	[1]	STUD-WELD
7.	6V-3607	[1]	FILM-NOTICE (CAUTION)
8.	8P-9770	[2]	PLATE
9.	4V-5492	[1]	BAR (R.H.)
10.	4V-5489	[1]	BAR (L.H.)
11.	4V-1544	[1]	CORNER-RH (R.H.)
12.	4V-1545	[1]	CORNER-LH (L.H.)
13.	5V-4670	[1]	EDGE-CUTTING
14.	4V-5494	[2]	PLATE (WEAR)
15.	8V-4334 C	[1]	PLATE
16.	5V-0570 C	[2]	PLATE (WEAR)
	1U-1896 F	[2]	EDGE-END (LONG WEARING)
	C		CHANGE FROM PREVIOUS TYPE
	F		NOT SHOWN

#SEBP14310464

9V-5302: BUCKET GP-GENERAL PURPOSE

BUCKET GP-GENERAL PURPOSE

9V5302 GENERAL PURPOSE BUCKET GROUP-LONG FLUSH MOUNTED TEETH
1.5 CU M (2 CU YD) 2438.5 MM (96 IN ) WIDE
9J3169-PAGE 244
AN ATTACHMENT

c337648 SEBP1431

9V5302 BUCKET GP-GENERAL PURPOSE Parts scheme

For full view, you need register

Parts for your 953 TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9V-5157	[1]	BUCKET AS.
2.	4V-4808 J	[1]	HINGE AS.
	4K-8479	[1]	STUD
3.	4V-4802 J	[1]	HINGE AS.
4.	4V-4803 J	[1]	HINGE AS.
5.	4V-4809 J	[1]	HINGE AS.
	4K-8479	[1]	STUD
6.	4V-4810 J	[1]	HINGE AS.
	4K-8479	[1]	STUD
7.	8P-9770 J	[2]	PLATE
8.	4V-5492 J	[1]	BAR (R.H.)
9.	4V-5489 J	[1]	BAR (L.H.)
10.	4V-8285 J	[1]	CORNER (R.H.)
11.	4V-8286 J	[1]	CORNER (L.H.)
12.	5V-0570 J	[2]	PLATE
13.	4V-5494 J	[2]	PLATE
14.	9V-5117 J	[1]	EDGE AS.
15.	1U-1254	[8]	ADAPTER
16.	8V-6930 J	[1]	PLATE
17.	9V-8237 J	[2]	PLATE
18.	7V-4380 J	[4]	PLATE
19.	4V-4807 J	[1]	HINGE AS.
	4K-8479	[1]	STUD
20.	9J-3169 Y	[8]	TIP GP. (LONG)
	J		PART OF 9V5157 BUCKET AS.
	Y		SEPARATE ILLUSTRATION

#SEBP14310465

8G-5552: CONTROL GP-BUCKET

CONTROL GP-BUCKET

8G5552 BUCKET CONTROL GROUP

c307899 SEBP1431

For full view, you need register

Parts for your 953 TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	0S-1589	[4]	BOLT
2.	8G-1096	[2]	PIN ASSEM.
3.	3B-8491	[5]	FITTING
4.	7P-6966	[1]	PIN ASSEM.
5.	7K-9209	[4]	SEAL
6.	8G-5553	[1]	ARM & BEARING ASSEM.
7.	7P-3453	[2]	BEARING
8.	7P-3454	[2]	BEARING
9.	7P-3455	[2]	BEARING
10.	2K-3656	[1]	BAR
11.	0L-1178	[6]	BOLT
12.	7P-9117	[5]	SPACER
13.	7P-3456	[1]	LEVER & BEARING ASSEM.
	7P-3463	[1]	BEARING
14.	7P-3467	[1]	PIN ASSEM.
	7K-9216	[2]	SEAL
15.	3B-8489	[2]	FITTING
16.	1D-4572	[2]	BOLT
17.	1K-6872	[3]	NUT
18.	7P-3464	[1]	LINK & BEARING ASSEM.
	7P-3466	[2]	BEARING
19.	7P-3474	[1]	PIN
20.	7K-9204	[4]	SEAL
21.	7K-9208	[4]	SEAL
22.	7K-9210	[4]	SEAL
23.	7P-3472	[2]	PIN
	7P-6832	[8]	WASHER -1.5MM(.06IN.)THK
	7P-6833	[8]	WASHER -1MM(.04IN.)THK
24.	7K-9205	[8]	SEAL
25.	7P-6820	[1]	SPACER
26.	8G-1105	[1]	PIN ASSEM.
27.	8G-1098	[2]	PIN ASSEM.
28.	2S-7593	[4]	WASHER- 5MM(.196IN.)THK
	8S-1069	[4]	WASHER -12.7MM(.500IN).THK
29.	8G-1097	[2]	PIN ASSEM.
30.	8G-1099	[1]	PIN ASSEM.
31.	7K-6627	[4]	FITTING
32.	2D-4867	[2]	FITTING
33.	8F-8804	[1]	BOLT

#SEBP14310466

7P-1108: ROPS GP

ROPS GP

7P1108 ROLL-OVER PROTECTIVE SYSTEM GROUP-PART 1 OF 2
S/N 5Z345-5Z425
8G0479-PAGE 256, 8G0478-PAGE 257, 7P8424-PAGE 261

c309676 SEBP1431

For full view, you need register

Parts for your 953 TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8G-1688	[1]	ANGLE ASSEM.
2.	7P-8424 Y	[1]	HARNESS ASSEM.
3.	4H-3001	[1]	PLUG
4.	8G-0483	[1]	SEAL
5.	0S-1614	[4]	BOLT
6.	5P-4115	[8]	WASHER
7.	8G-0482	[1]	SEAL
8.	5P-1005 C	[3]	PLUG
9.	5P-8524	[4]	GROMMET
10.	5D-8902	[2]	BUMPER
	5M-3034	[4]	NUT
	4B-4277 C	[4]	WASHER
11.	7P-3162	[2]	WINDOW
12.	8G-0480	[1]	SEAL
13.	7P-6605	[1]	ROLLOVER ASSEM.
14.	7P-3299	[1]	WINDSHIELD
15.	8G-0478 Y	[1]	DOOR GROUP
16.	8G-0363	[4]	PLATE
	5P-5939 D		SEAL- .1M(3.94IN.)
17.	8G-0485	[2]	SEAL
18.	8G-3034 C	[2]	BRACKET
19.	4M-5283	[4]	BOLT
20.	7G-0247	[2]	LATCH
	7G-0246	[2]	PIN
	3B-4610	[2]	COTTER PIN
21.	052-0580	[2]	ANCHOR
22.	8G-0479 Y	[1]	DOOR GROUP
23.	8G-0484	[1]	SEAL
24.	8G-0481	[1]	WINDOW GROUP
25.	8G-2456	[1]	GLASS
26.	8G-2457	[1]	SLIDE ASSEM.
	8G-2455	[1]	GLASS
	8G-2454	[1]	LOCK ASSEM. (R.H.)
	8G-2458	[1]	LOCK ASSEM. (L.H.)
27.	7P-3163	[2]	WINDOW
28.	8G-0918	[1]	COVER
	C		INDICATES CHANGE
	Y		SEPARATE ILLUSTRATION
	D		ORDER BY THE METER

#SEBP14310467

7P-1108: ROPS GP

ROPS GP

7P1108 ROLL-OVER PROTECTIVE SYSTEM GROUP-PART 2 OF 2
S/N 5Z345-5Z425

c301676 SEBP1431

For full view, you need register

Parts for your 953 TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7P-7120	[1]	HEADLINER
2.	3K-8781	[1]	FUSE-(7.5 amp)
	4K-5122	[1]	HOLDER
3.	7P-8429	[1]	PLATE
4.	7N-8000	[1]	SWITCH -(dome light)
5.	0S-0509	[8]	BOLT
6.	5P-1075	[22]	WASHER
7.	7P-4175	[1]	COVER
8.	0S-1615	[10]	BOLT
9.	5P-4115	[12]	WASHER
10.	7P-3310	[1]	PLATE ASSEM.
11.	7P-7725	[1]	CHANNEL
12.	0S-1616	[2]	BOLT
13.	7N-8043	[1]	LAMP ASSEM.
			(Includes)
	7N-9943	[1]	LAMP
	7N-8305	[1]	DOOR ASSEM.
14.	6L-7159	[2]	SCREW
15.	2H-4093	[3]	SCREW ASSEM.
16.	035-2017	[18]	SCREW
17.	6V-5158 C	[2]	STRIKER ASSEM.
	4J-3915	[4]	SHIM
18.	8G-1686	[1]	COVER ASSEM.
	C		INDICATES CHANGE

#SEBP14310468

7P-1108: ROPS GP

ROPS GP

7P1108 ROLL-OVER PROTECTIVE SYSTEM GROUP-PART 1 OF 2
S/N 5Z426-UP
8G0479-PAGE 256, 8G0478-PAGE 257, 8G8474-PAGE 261B

c321628 SEBP1431

For full view, you need register

Parts for your 953 TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8G-1688	[1]	ANGLE AS
2.	8G-8474 CY	[1]	HARNESS AS-CAB
3.	4H-3001	[1]	PLUG-BUTTON
4.	8G-0483	[1]	SEAL
5.	0S-1614	[4]	BOLT
6.	5P-4115 C	[4]	WASHER
7.	8G-0482	[1]	SEAL
8.	5P-1005 C	[3]	PLUG-SEALING
9.	5P-8524	[4]	GROMMET
10.	5D-8902	[2]	BUMPER-CONICAL
	5M-3034	[4]	LOCKNUT
	4B-4277 C	[4]	WASHER
11.	7P-3162	[2]	WINDOW
12.	8G-0480	[1]	SEAL-WINDSHIELD
13.	7P-6605	[1]	ROPS AS-ENCLOSED
14.	7P-3299	[1]	WINDSHIELD
15.	8G-0478 Y	[1]	DOOR GP-RH
16.	8G-0363	[4]	PLATE
	5P-5939 BD		SEAL
17.	8G-0485	[2]	SEAL
18.	9M-3835 C	[2]	LATCH-RUBBER
	2M-5795 C	[2]	PIN-CLEVIS
	3B-4607 C	[2]	COTTER
19.	8G-0479 Y	[1]	DOOR GP-LH
20.	8G-0484	[1]	SEAL
21.	8G-0481	[1]	WINDOW GP
22.	8G-2456	[1]	GLASS
23.	8G-2457	[1]	SLIDE AS
	8G-2455	[1]	GLASS
	8G-2454	[1]	LOCK AS (R.H.)
	8G-2458	[1]	LOCK AS (L.H.)
24.	7P-3163	[2]	WINDOW
25.	8G-0918	[1]	COVER
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	Y		SEPARATE ILLUSTRATION

#SEBP14310469

7P-1108: ROPS GP

ROPS GP

7P1108 ROLL-OVER PROTECTIVE SYSTEM GROUP-PART 2 OF 2
S/N 5Z426-UP
7N8000-PAGE 95

c321629 SEBP1431

For full view, you need register

Parts for your 953 TRACK LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7P-7120	[1]	HEADLINER
2.	3K-8781	[1]	FUSE (7.5 AMP)
	4K-5122 C	[1]	HOLDER AS-FUSE
	7N-2867	[1]	CAP-FUSE HOLDER
	6T-8115 C	[1]	NUT
3.	7P-8429	[1]	PLATE
4.	7N-8000 CY	[1]	SWITCH AS-TOGGLE (DOME LIGHT)
5.	0S-0509	[8]	BOLT
6.	5P-1075	[22]	WASHER-HARD
7.	7P-4175	[1]	COVER
8.	0S-1615	[10]	BOLT
9.	5P-4115	[12]	WASHER
10.	7P-3310	[1]	PLATE AS
11.	7P-7725	[1]	CHANNEL
12.	0S-1616	[2]	BOLT
13.	7N-8043	[1]	LAMP GP-DOME
	7N-9943	[1]	LAMP-MINIATURE
	7N-8305	[1]	DOOR AS-LAMP
14.	6L-7159	[2]	SCREW-MACHINE
15.	2H-4093	[3]	SCREW AS-MACHINE
16.	035-2017	[18]	SCREW-BUTTON HEAD
17.	6V-5158 C	[2]	STRIKER AS-BODY
	4J-3915	[4]	SHIM 1.52MM(.060IN)THK
18.	8G-8888 C	[1]	COVER AS
19.	3V-4694 C	[1]	PLUG-BUTTON
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION