AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7C9081 GOVERNOR & FUEL INJECTION PUMP GP S/N 6TB3573-5005 2W7325-PAGE 195.05, 2W8628-PAGE 191, 4W2549-PAGE 193.00.02 3406B


FUEL SYSTEM
GOVERNOR GP

ENGINE - MACHINE 3406B ENGINE - MACHINE 6TB
 3406B INDUSTRIAL ENGINE 6TB00001-09165 SEBP1434 3406B 6TB   (2018)

FUEL SYSTEM

GOVERNOR GP
PUMP GP-GOV & FUEL INJ
2W-8541 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-8541 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-9081 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-9081 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-9081 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-9104 PUMP GP-GOV & FUEL INJ
 

#SEBP14340620
 

7C-9081: PUMP GP-GOV & FUEL INJ

7C9081 GOVERNOR & FUEL INJECTION PUMP GP
S/N 6TB3573-5005
2W7325-PAGE 195.05, 2W8628-PAGE 191, 4W2549-PAGE 193.00.02
c453714 SEBP1434
7C9081 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-2549 Y [1] PUMP GP-FUEL INJECTION  
2. 1W-3151 [1] ELBOW  
3. 2W-8628 Y [1] TORQUE CONTROL GP  
4. 3J-1907 [1] SEAL  
5. 8N-9382 [1] GASKET  
6. 6V-5894 [2] BOLT  
7. 8F-8178 [1] BOLT  
8. 8B-2377 [1] BOLT  
9. 2W-7325 Y [1] GOVERNOR GP  
10. 8N-3799 [1] COVER-FUEL RATIO  
11. 5B-7040 [2] BOLT  
12. 2W-5447 [1] GASKET  
13. 2W-5448 [1] COVER  
14. 4F-7957 [2] BOLT  
15. 8N-3094 [1] SPRING-DETENT  
16. 033-5879 [1] SEAL-O-RING  
17. 1B-2716 [2] BOLT  
18. 8J-8343 [1] SEAL-O-RING  
19. 8S-4710 [4] BOLT  
20. 7B-2742 [2] BOLT  
21. 8M-8515 [1] SEAL-O-RING  
22. 9S-4180 [1] PLUG-O-RING  
23. 4J-7533 [1] SEAL-O-RING  
24. 5P-6620 [1] SEAL-O-RING  
25. 2N-2878 [1] SPRING-GOVERNOR  
26. 7N-5334 [1] SETSCREW-SOCKET  
27. 8L-5832 [1] NUT-HEX  
  Y   SEPARATE ILLUSTRATION
 

#SEBP14340621
 

7C-9081: PUMP GP-GOV & FUEL INJ

7C9081 GOVERNOR & FUEL INJECTION PUMP GP
S/N 6TB5006-7578
2W7325-PAGE 195.05, 2W8628-PAGE 191, 4W2549-PAGE 193.00.02
9Y1234-PAGE 213
c466333 SEBP1434
7C9081 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-2549 Y [1] PUMP GP-FUEL INJECTION  
2. 2W-7325 Y [1] GOVERNOR GP  
3. 8N-3799 [1] COVER-FUEL RATIO  
4. 2W-5448 [1] COVER  
5. 9S-4180 [1] PLUG-O-RING  
  4J-7533 [1] SEAL-O-RING  
6. 9Y-1234 CY [1] FASTENER GP  
7. 5H-6552 C [1] SETSCREW-SOCKET  
8. 8L-5832 [1] NUT-HEX  
9. 2W-8628 Y [1] TORQUE CONTROL GP  
10. 2N-2878 [1] SPRING-GOVERNOR  
11. 8N-3094 [1] SPRING-DETENT  
12. 2W-5447 [1] GASKET  
13. 8N-9382 [1] GASKET  
14. 8J-8343 [1] SEAL-O-RING  
15. 8M-8515 [1] SEAL-O-RING  
16. 5P-6620 [1] SEAL-O-RING  
17. 033-5879 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14340622
 

7C-9081: PUMP GP-GOV & FUEL INJ

7C9081 GOVERNOR & FUEL INJECTION PUMP GP
S/N 6TB7579-UP
2W7325-PAGE 195.05, 2W8628-PAGE 191, 9Y1234-PAGE 213,
4P1381-PAGE 183.03
c513980 SEBP1434
7C9081 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-1381 CY [1] PUMP GP-FUEL INJECTION  
2. 2W-7325 Y [1] GOVERNOR GP  
3. 8N-3799 [1] COVER-FUEL RATIO  
4. 2W-5448 [1] COVER  
5. 9S-4180 [1] PLUG-O-RING  
  4J-7533 [1] SEAL-O-RING  
6. 9Y-1234 CY [1] FASTENER GP  
7. 5H-6552 C [1] SETSCREW-SOCKET  
8. 8L-5832 [1] NUT-HEX  
9. 2W-8628 Y [1] TORQUE CONTROL GP  
10. 2N-2878 [1] SPRING-GOVERNOR  
11. 8N-3094 [1] SPRING-DETENT  
12. 2W-5447 [1] GASKET  
13. 8N-9382 [1] GASKET  
14. 8J-8343 [1] SEAL-O-RING  
15. 8M-8515 [1] SEAL-O-RING  
16. 5P-6620 [1] SEAL-O-RING  
17. 033-5879 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14340623
 

2W-9104: PUMP GP-GOV & FUEL INJ

2W9104 GOVERNOR AND FUEL INJECTION PUMP GP
S/N 6TB1-674
2W6312-PAGE 192, 4W2549-PAGE 193, 2W7325-PAGE 194
c310576 SEBP1434
2W9104 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-2549 Y [1] PUMP GP-FUEL INJECTION  
2. 1W-3151 [1] ELBOW  
3. 1W-3153 [1] ORIFICE  
4. 3J-1907 [1] SEAL  
5. 2W-7325 Y [1] GOVERNOR GP  
6. 8N-3799 [1] COVER-FUEL RATIO  
7. 8N-3094 [1] SPRING-DETENT  
8. 8N-9382 [1] GASKET  
9. 8F-6302 [2] BOLT  
10. 5F-0304 [2] PLUG-DRAIN  
11. 1V-6341 [2] SEAL  
12. 5B-7040 [2] BOLT  
13. 2W-5447 [1] GASKET  
14. 2W-5448 [1] COVER  
15. 4F-7957 [2] BOLT  
16. 1B-2716 [2] BOLT  
17. 3L-6768 [1] SEAL-O-RING  
18. 8S-4710 [4] BOLT  
19. 7B-2742 [2] BOLT  
20. 5P-5601 [1] SEAL-O-RING  
21. 9S-4180 [1] PLUG-O-RING  
22. 4J-7533 [1] SEAL-O-RING  
23. 5P-6620 [1] SEAL-O-RING  
24. 8L-8234 [1] SPRING-GOVERNOR  
25. 2W-6312 Y [1] TORQUE CONTROL GP  
26. 033-5879 [1] SEAL-O-RING  
27. 8F-8178 [1] BOLT  
28. 8B-2377 [1] BOLT  
  Y   SEPARATE ILLUSTRATION
 

#SEBP14340624
 

2W-9104: PUMP GP-GOV & FUEL INJ

2W9104 GOVERNOR & FUEL INJECTION PUMP GP
S/N 6TB675-2667
2W6312-PAGE 192, 4W2547-PAGE 193.01, 2W7325-PAGE 194
c323706 SEBP1434
2W9104 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-2547 CY [1] PUMP GP-FUEL INJECTION  
2. 1W-3151 [1] ELBOW  
3. 1W-3153 [1] ORIFICE  
4. 3J-1907 [1] SEAL  
5. 2W-7325 Y [1] GOVERNOR GP  
6. 8N-3799 [1] COVER-FUEL RATIO  
7. 8N-3094 [1] SPRING-DETENT  
8. 8N-9382 [1] GASKET  
9. 6V-5894 C [2] BOLT  
10. 8F-8178 [1] BOLT  
11. 8B-2377 [1] BOLT  
12. 5B-7040 [2] BOLT  
13. 2W-5447 [1] GASKET  
14. 2W-5448 [1] COVER  
15. 4F-7957 [2] BOLT  
16. 1B-2716 [2] BOLT  
17. 3L-6768 [1] SEAL-O-RING  
18. 8S-4710 [4] BOLT  
19. 7B-2742 [2] BOLT  
20. 5P-5601 [1] SEAL-O-RING  
21. 9S-4180 [1] PLUG-O-RING  
22. 4J-7533 [1] SEAL-O-RING  
23. 5P-6620 [1] SEAL-O-RING  
24. 8L-8234 [1] SPRING-GOVERNOR  
25. 2W-6312 Y [1] TORQUE CONTROL GP  
26. 033-5879 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14340625
 

2W-9104: PUMP GP-GOV & FUEL INJ

2W9104 GOVERNOR & FUEL INJECTION PUMP GP
S/N 6TB2668-7578
2W6660-PAGE 192.01, 4W2547-PAGE 193.01, 2W7325-PAGE 194
c506767 SEBP1434
2W9104 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-2547 Y [1] PUMP GP-FUEL INJECTION  
2. 7X-0869 [1] BOLT-LOCKING  
3. 7E-6785 [1] GASKET  
4. 2W-6660 CY [1] TORQUE CONTROL GP  
5. 2W-7325 Y [1] GOVERNOR GP  
6. 8N-3799 [1] COVER-FUEL RATIO  
7. 8N-3094 [1] SPRING-DETENT  
8. 8N-9382 [1] GASKET  
9. 6V-5894 [2] BOLT  
10. 8F-8178 [1] BOLT  
11. 033-5879 [1] SEAL-O-RING  
12. 5B-7040 [2] BOLT  
13. 5H-6552 [1] SETSCREW-SOCKET  
  8L-5832 [1] NUT-HEX  
14. 2W-5448 [1] COVER  
15. 4F-7957 [2] BOLT  
16. 1B-2716 [2] BOLT  
17. 8J-8343 C [1] SEAL-O-RING  
18. 8S-4710 [4] BOLT  
19. 7B-2742 [2] BOLT  
20. 8M-8515 C [1] SEAL-O-RING  
21. 9S-4180 [1] PLUG-O-RING  
22. 4J-7533 [1] SEAL-O-RING  
23. 5P-6620 [1] SEAL-O-RING  
24. 7L-4959 [1] SPRING-GOVERNOR  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14340626
 

2W-9104: PUMP GP-GOV & FUEL INJ

2W9104 GOVERNOR & FUEL INJECTION PUMP GP
S/N 6TB7579-UP
2W6660-PAGE 192.01, 2W7325-PAGE 194, 4P1383-PAGE 193.02.02
c513288 SEBP1434
2W9104 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-1383 Y [1] PUMP GP-FUEL INJECTION  
2. 7X-0869 [1] BOLT-LOCKING  
3. 7E-6785 [1] GASKET  
4. 2W-6660 CY [1] TORQUE CONTROL GP  
5. 2W-7325 Y [1] GOVERNOR GP  
6. 8N-3799 [1] COVER-FUEL RATIO  
7. 8N-3094 [1] SPRING-DETENT  
8. 8N-9382 [1] GASKET  
9. 6V-5894 [2] BOLT  
10. 8F-8178 [1] BOLT  
11. 033-5879 [1] SEAL-O-RING  
12. 5B-7040 [2] BOLT  
13. 5H-6552 [1] SETSCREW-SOCKET  
  8L-5832 [1] NUT-HEX  
14. 2W-5448 [1] COVER  
15. 4F-7957 [2] BOLT  
16. 1B-2716 [2] BOLT  
17. 8J-8343 C [1] SEAL-O-RING  
18. 8S-4710 [4] BOLT  
19. 7B-2742 [2] BOLT  
20. 8M-8515 C [1] SEAL-O-RING  
21. 9S-4180 [1] PLUG-O-RING  
22. 4J-7533 [1] SEAL-O-RING  
23. 5P-6620 [1] SEAL-O-RING  
24. 7L-4959 [1] SPRING-GOVERNOR  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14340627
 

7C-6533: PUMP GP-GOV & FUEL INJ

7C6533 GOVERNOR & FUEL INJECTION PUMP GP
S/N 6TB3525-5625
2W8628-PAGE 191, 7C3222-PAGE-193.05
7C5890-PAGE 193.07, 7C6534-PAGE 197.03
c353812 SEBP1434
7C6533 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-3222 Y [1] PUMP GP-FUEL INJECTION  
2. 2W-8628 Y [1] TORQUE CONTROL GP  
3. 7C-5890 Y [1] FASTENER GP-GOVERNOR  
4. 7C-6534 Y [1] GOVERNOR GP  
5. 1W-3151 [1] ELBOW  
  1W-3153 [1] ORIFICE  
6. 3J-1907 [1] SEAL  
7. 8N-3094 [1] SPRING-DETENT  
8. 2W-5448 [1] COVER  
9. 8L-8234 [1] SPRING-GOVERNOR  
10. 7C-1070 [1] PLATE  
11. 7C-1071 [1] PLATE  
12. 7W-5318 [1] CONTROL AS-RATIO  
13. 7W-1691 [1] WASHER  
14. 7W-0802 [1] DIAPHRAGM  
15. 5P-6620 [1] SEAL-O-RING  
    14MM(.55IN)ID
16. 8N-9382 [1] GASKET  
17. 2W-5447 [1] GASKET  
18. 5M-2057 [2] SEAL-O-RING  
    34.59MM(1.36IN)ID
19. 8J-8343 [1] SEAL-O-RING  
    6.02MM(.237IN)ID
20. 033-5879 [1] SEAL-O-RING  
    11.1MM(.438IN)ID
21. 4B-2049 [1] NUT  
22. 7N-5334 [1] SETSCREW-SOCKET  
  Y   SEPARATE ILLUSTRATION
 

#SEBP14340628
 

7C-6533: PUMP GP-GOV & FUEL INJ

7C6533 GOVERNOR & FUEL INJECTION PUMP GP
S/N 6TB5626-7578
2W8628-PAGE 191, 7C3222-PAGE 193.05, 9Y8087-PAGE 219.05,
2W7325-PAGE 195.05, 9Y4913-PAGE 193.07
c471838 SEBP1434
7C6533 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-3222 Y [1] PUMP GP-FUEL INJECTION  
2. 2W-8628 Y [1] TORQUE CONTROL GP  
3. 9Y-4913 YC [1] FASTENER GP  
4. 2W-7325 YC [1] GOVERNOR GP  
5. 8N-6680 C [1] SCREEN AS  
  2D-6392 C [1] SEAL-O-RING (6.07MM ID)  
6. 8N-9382 [1] GASKET  
7. 8N-3094 [1] SPRING-DETENT  
8. 2W-5448 [1] COVER  
  2W-5447 [1] GASKET  
9. 8L-8234 [1] SPRING-GOVERNOR  
10. 8M-8515 C [1] SEAL-O-RING  
11. 8J-8343 [1] SEAL-O-RING  
12. 9Y-8087 YC [1] CONTROL GP-FUEL RATIO  
13. 033-5879 [1] SEAL-O-RING  
14. 5H-6552 C [1] SETSCREW-SOCKET  
  8L-5832 C [1] NUT-HEX  
15. 5P-6620 [1] SEAL-O-RING (14MM ID)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14340629
 

7C-6533: PUMP GP-GOV & FUEL INJ

7C6533 GOVERNOR & FUEL INJECTION PUMP GP
S/N 6TB7579-UP
2W8628-PAGE 191, 9Y4913-PAGE 193.07, 2W7325-PAGE 195.05,
9Y8087-PAGE 219.05, 4P1415-PAGE 193.06.01
c513959 SEBP1434
7C6533 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-1415 YC [1] PUMP GP-FUEL INJECTION  
2. 2W-8628 Y [1] TORQUE CONTROL GP  
3. 9Y-4913 Y [1] FASTENER GP  
4. 2W-7325 Y [1] GOVERNOR GP  
5. 8N-6680 [1] SCREEN AS  
  2D-6392 [1] SEAL-O-RING (6.07MM ID)  
6. 8N-9382 [1] GASKET  
7. 8N-3094 [1] SPRING-DETENT  
8. 2W-5448 [1] COVER  
  2W-5447 [1] GASKET  
9. 8L-8234 [1] SPRING-GOVERNOR  
10. 8M-8515 [1] SEAL-O-RING  
11. 8J-8343 [1] SEAL-O-RING  
12. 9Y-8087 Y [1] CONTROL GP-FUEL RATIO  
13. 033-5879 [1] SEAL-O-RING  
14. 5H-6552 [1] SETSCREW-SOCKET  
  8L-5832 [1] NUT-HEX  
15. 5P-6620 [1] SEAL-O-RING (14MM ID)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
Service Information For Woodward Governors
1983/10/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
New EG3P Actuator Assemblies Available
1984/03/07
Overvoltage Protection For Woodward 2301 Governor
1984/04/11
Only The External Needle Valve Can Be Adjusted On Woodward EG3P or EG10P Actuators
1984/05/16
New Valve Assembly And Seal Used In Fuel Transfer Pump
1984/05/16
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage
1984/06/20
Bonnet Of Fuel Injection Pump Group Now Serviced Separately
1984/12/12
Fill Oil Sump Before Installing Woodward Governor
1985/01/16
Over Fueling Spring No Longer Used In Governor
1985/03/01
Thread Lock Now Used On Timing Advance Bolts
1985/08/01
Eliminating Interference Between Governor Housing And Tachometer Drive
1985/08/01
Special Instruction Available To Salvage Governor Housing
1985/08/01
Fuel Transfer Pump Improved
1985/11/01
Check Fuel Injection Replacement Pump Installation
1985/11/01
Special Bolts Help Prevent Unauthorized Modification Of Fuel System And Governor Settings
1985/12/01
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct
1986/05/01
FT Tooling Prints Available For Bushing Installation In Governor Housing
1986/05/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
New Material Used For Disc In Valve Assemblies In Fuel Transfer Pump Groups
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Improved Retaining Bushing In Fuel Injection Pump
1986/12/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters
1987/10/01
Governor Control Motor Polarity May Require A Change
1990/11/01
Corrections For Systems Operation, Troubleshooting, And Specifications For 2301 Electric Governors For Generator Set And Industrial Engines, SENR2928-01
1991/05/01
New Speed Setting Clutch Group For 3161 Woodward Governors
1991/06/01
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings
1991/10/01
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings
1992/01/01
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks
1992/08/01
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly
1992/09/01
New Bonnet Used In Fuel Injection Pump Group
1993/06/01
Fuel Injection Pump Improvements{1251}
1994/02/01
New Seals In Pump Fastener Group And Fuel Injection Pump Group Have Improved Heat Set Resistance {1251}
1994/09/01
Pressure Compensated Simple Governor (PSG Governor) Changes From Aluminum To Cast Iron Housing {1264}
1995/04/01
Governor Spring Guide Press Depth {1287,1284}
1996/01/17
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
New Governor Weight And Race Increase Durability {1264}
1996/09/23
Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/23
Fuel Injection Pump Bushings Have New Groove Adjacent To Load Ring {1251}
1996/11/01
Improved Bushing O-Ring Seal Available For Injection Pump Groups{1251}
1997/03/01
Improvements Made To Remanufactured 0R-3008 Fuel Transfer Pump{1256}
1997/03/01
3406C Pump And Governor Changes Provide Improved Oil And Fuel Leak Resistence{7555}
1997/09/15
Improved Governor Raise/Lower Motor Used In Governor Control Groups{1264}
1998/03/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Use of 6V6070 Governor Adjusting Tool Group{1250}
Use of 6V6070 Governor Adjusting Tool Group{1250}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Service Letter-NACD
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Service Letter-Australia
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TORQUEING THE GOVERNOR SHAFT BOLT FOR CERTAIN 3406 ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TORQUEING THE GOVERNOR SHAFT BOLT FOR CERTAIN 3406 ENGINES.
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Service Letter-CFEL
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TORQUEING THE GOVERNOR SHAFT BOLT FOR CERTAIN 3406 ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TORQUEING THE GOVERNOR SHAFT BOLT FOR CERTAIN 3406 ENGINES.
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Service Letter-CSARL
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TORQUEING THE GOVERNOR SHAFT BOLT FOR CERTAIN 3406 ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TORQUEING THE GOVERNOR SHAFT BOLT FOR CERTAIN 3406 ENGINES.
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Service Letter-Americas
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TORQUEING THE GOVERNOR SHAFT BOLT FOR CERTAIN 3406 ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TORQUEING THE GOVERNOR SHAFT BOLT FOR CERTAIN 3406 ENGINES.
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Fuel Transfer Pump
3406B INDUSTRIAL & MARINE ENGINES
Governor
3406B INDUSTRIAL & MARINE ENGINES
Fuel Ratio Control
3406B INDUSTRIAL & MARINE ENGINES
Governor And Fuel Pump Drive Group<BR> (Automatic Timing Advance Unit)
3406B INDUSTRIAL & MARINE ENGINES
Woodward PSG Governor
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
Governor Controls
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
Governor Linkage
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
Governor
3406C INDUSTRIAL & MARINE ENGINES
Governor and Fuel Pump Drive Group
3406C INDUSTRIAL & MARINE ENGINES
Governor Control
3406C INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TORQUEING THE GOVERNOR SHAFT BOLT FOR CERTAIN 3406 ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TORQUEING THE GOVERNOR SHAFT BOLT FOR CERTAIN 3406 ENGINES.
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Service Letter-Asia
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TORQUEING THE GOVERNOR SHAFT BOLT FOR CERTAIN 3406 ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TORQUEING THE GOVERNOR SHAFT BOLT FOR CERTAIN 3406 ENGINES.
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Systems Operation
Systems Operation
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Installation And Operation
2301A SPEED CONTROL
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TORQUEING THE GOVERNOR SHAFT BOLT FOR CERTAIN 3406 ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TORQUEING THE GOVERNOR SHAFT BOLT FOR CERTAIN 3406 ENGINES.
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Testing and Adjusting
Testing and Adjusting
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Installation And Operation
2301A SPEED CONTROL
Troubleshooting
Introduction
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem Index
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 1: Fuel Linkage Has Limited Travel, Binds, Or Takes Excessive Force
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 2: Engine Will Not Start
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 3: Engine Will Not Carry Load (Low Power)
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 4: Engine Will Not Decelerate. Engine Will Not Idle.
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 5: Engine Speed Not Constant
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 6: Engine Overspeeds
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 7: Engine Does Not Share Load (For Load Share Units Only)
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Problem No. 8: Engine Does Not Parallel
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Service Procedures
2301 ELECTRIC GOVERNOR FOR GENERATOR SET AND INDUSTRIAL ENGI
Chapter 5. Troubleshooting
2301A SPEED CONTROL
Appendix A. Guide for Handling and Protection of Electronic Controls, Printed Circuit Boards, &amp; Modules
2301A SPEED CONTROL
Appendix B. EMI Controls in Electronic Governing Systems
2301A SPEED CONTROL
Disassembly and Assembly
Fuel Transfer Pump
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump And Governor Drive
3406B INDUSTRIAL & MARINE ENGINES
Fuel Ratio Control
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump And Governor
3406B INDUSTRIAL & MARINE ENGINES
Governor
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump &amp; Governor Drive
3406C INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump &amp; Governor
3406C INDUSTRIAL & MARINE ENGINES
Governor (Industrial Engine)
3406C INDUSTRIAL & MARINE ENGINES
Governor (Marine Engine)
3406C INDUSTRIAL & MARINE ENGINES
Governor
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3406C INDUSTRIAL & MARINE ENGINES
Service Magazine
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24
Part Number For Fuel Injection Pump Group In New Location{1253,1286}
1981/11/09
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
New EG3P Actuator Assemblies Available{1289}
1984/02/27
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
Overvoltage Protection For Woodward 2301 Governor{1289}
1984/04/09
Only The External Needle Valve Can Be Adjusted On Woodward EG3P or EG10P Actuators{1265,1289}
1984/04/23
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage{1264}
1984/05/14
New Valve Assembly And Seal Used In Fuel Transfer Pump{1256}
1984/05/14
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Bonnet Of Fuel Injection Pump Group Now Serviced Separately{1251,1250}
1984/12/10
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
New Tools Available To Service Fuel Injection Nozzles And Adapters {0706,1254}
1985/01/14
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Over Fueling Spring No Longer Used In Governor{1264,1250}
1985/02/04
Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced{1254}
1985/03/18
Special Instruction Available To Salvage Governor Housing{1287}
1985/07/15
Eliminating Interference Between Governor Housing And Tachometer Drive{1264,7487}
1985/08/12
Thread Lock Now Used On Timing Advance Bolts{1272}
1985/08/12
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Steel Fuel Pump Lifter Used{1250,1251}
1985/09/02
Fuel Transfer Pump Improved{1256}
1985/10/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Check Fuel Injection Replacement Pump Installation{1251,1253,1257}
1985/10/28
Special Bolts Help Prevent Unauthorized Modification Of Fuel System And Governor Settings{1250,1264,1278,1287}
1985/11/11
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
FT Tooling Prints Available For Bushing Installation In Governor Housing{0600,1287}
1986/05/05
More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups{1265,1264,1250}
1986/06/02
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved Retaining Bushing In Fuel Injection Pump {1251,1250}
1986/12/01
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Serviceable Parts For New Fuel Ratio Control; Pressurize Control To Set Rack On 3406B Engines In Driltech Drill Rigs{1257,1258,1264}
1987/04/20
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Governor Control Motor Polarity May Require A Change{1265,1408,7556}
1990/10/29
New Speed Setting Clutch Group For 3161 Woodward Governors{1265}
1991/05/20
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings{1253}
1991/09/30
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
Major Engine Component Changes{1201,1202,1205,1218,1219,1230,1253,1288,1331}
1992/09/07
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly{1251,1253,1281,1292}
1992/09/21
New Bonnet Used In Fuel Injection Pump Group {1251}
1993/06/14
Fuel Injection Pump Improvements{1251}
1994/02/07
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
3406C Pump And Governor Changes Provide Improved Oil And Fuel Leak Resistence{7555}
1997/09/08

Caterpillar Parts SIS Catalog 3406B :

PUMP GP-GOV & FUEL INJ
2W-8541 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-8541 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-8541 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-8541 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-8539 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-8539 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-8539 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-8538 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-9081 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-9081 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-9104 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-9104 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-9104 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-9104 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-6533 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-6533 PUMP GP-GOV & FUEL INJ

Truck sale:

1990 CAT 3406B
USD $25,000 
1990 CAT 3406B

Power Generation Enterprises Inc.
North Hollywood, California
1991 CAT 3406B
USD $22,000 
1991 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
1989 CAT 3406B
USD $35,000 
1989 CAT 3406B

Worldwide Power Products LLC
Houston, Texas
1988 CAT 3406B
USD $29,000 
1988 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
CATERPILLAR 3406B 1988
$29,000 USD 
CATERPILLAR 3406B 1988
- MARINE - PROPULSION
RANSOME ENGINE POWER
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.