AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2W6972 FUEL INJECTION PUMP GROUP TYPE 1. S/N 6TB717-UP PART OF 2W9115 & 2W8030 PUMPS 3406B ENGINE - MACHINE


FUEL SYSTEM
PUMP GP-FUEL INJECTION

ENGINE - MACHINE 3406B ENGINE - MACHINE 6TB
 3406B INDUSTRIAL ENGINE 6TB00001-09165 SEBP1434 3406B 6TB   (2018)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1383 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1383 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
2W-6972 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
2W-6972 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1384 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1384 PUMP GP-FUEL INJECTION
 

#SEBP14340650
 

2W-6972: PUMP GP-FUEL INJECTION

2W6972 FUEL INJECTION PUMP GROUP
TYPE 1. S/N 6TB717-UP
PART OF 2W9115 & 2W8030 PUMPS
c339411 SEBP1434
2W6972 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-9364 [1] HOUSING AS-FUEL PUMP  
2. 8S-6814 [1] PIN  
3. 1S-1953 [1] BEARING-RACK  
4. 9N-6668 [1] BEARING-SLEEVE  
5. 8N-2648 [1] BEARING-CAMSHAFT  
6. 9N-6667 [1] BEARING-SLEEVE  
7. 8N-0654 [6] DOWEL  
8. 1W-3285 [1] BEARING-RACK  
9. 8N-3731 [6] PIN-LIFTER GUIDE  
10. 3H-0442 [6] SEAL-O-RING  
11. 8N-9367 [1] RACK-REGULATOR  
12. 9S-8001 [1] PLUG-O-RING  
13. 4J-7533 [1] SEAL-O-RING  
14. 7N-7166 [2] RACE-BEARING-THRUST  
15. 7L-3326 [1] BEARING-THRUST  
16. 9J-0114 [2] RACE-THRUST  
17. 7D-1189 [1] BEARING-THRUST  
18. 1W-4874 [1] RING-GUIDE  
19. 2W-6971 [1] CAMSHAFT-FUEL PUMP  
20. 8N-9371 [1] COVER  
21. 4F-7957 [4] BOLT  
22. 1H-9696 [2] SEAL-O-RING  
23. 6V-5135 [4] SETSCREW-SOCKET  
24. 3J-7354 [2] SEAL-O-RING  
25. 8N-9374 [1] GASKET  
26. 8N-9373 [1] COVER-GALLERY  
27. 2A-0762 [14] BOLT  
28. 9S-4182 [2] PLUG  
29. 4D-3107 [6] SEAL-O-RING  
30. 2W-3413 [6] PUMP GP-FUEL INJECTION  
    (EACH INCLUDES)
  2W-3409 C [1] BONNET-VALVE  
31. 1W-6982 [1] VALVE AS-CHECK  
32. 8N-5993 [1] SPRING-FLOW CHECK  
33. 1N-3257 [1] RING-RETAINER  
34. 8N-0656 [6] BUSHING  
35. 1W-0931 [6] LIFTER AS  
36. 8N-0672 [6] SPACER-FUEL PUMP TIMING  
37. 1W-5785 [1] COVER  
38. 9S-8007 [2] PLUG-O-RING  
39. 7J-0204 [2] SEAL-O-RING  
40. 9S-8003 [1] PLUG-O-RING  
41. 1J-9671 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14340651
 

2W-6972: PUMP GP-FUEL INJECTION

2W6972 PUMP GP-FUEL INJECTION
TYPE 2. S/N 6TB717-UP
PART OF 2W9115 & 2W8030 PUMPS
c544796 SEBP1434
2W6972 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3907 [1] HOUSING AS-FUEL PUMP  
2. 4F-2099 [1] DOWEL  
3. 1S-1953 [1] BEARING-RACK  
4. 9N-6668 [1] BEARING-SLEEVE  
5. 8N-2648 [1] BEARING-CAMSHAFT  
6. 9N-6667 [1] BEARING-SLEEVE  
7. 8N-0654 [1] DOWEL  
8. 1W-3285 [1] BEARING-RACK  
9. 8N-3731 [1] PIN-LIFTER GUIDE  
10. 3H-0442 [1] SEAL-O-RING  
11. 8N-9367 [1] RACK-REGULATOR  
12. 9S-8001 [1] PLUG-O-RING  
13. 4J-7533 [1] SEAL-O-RING  
14. 7N-7166 [2] RACE-BEARING-THRUST  
15. 7L-3326 [1] BEARING-THRUST  
16. 9J-0114 [2] RACE-THRUST  
17. 7D-1189 [1] BEARING-THRUST  
18. 1W-4874 [1] RING-GUIDE  
19. 7W-3106 C [1] CAMSHAFT-FUEL PUMP  
20. 8N-9371 [1] COVER  
21. 4F-7957 [4] BOLT  
22. 1H-9696 [2] SEAL-O-RING  
23. 6V-5135 C [2] SETSCREW-SOCKET  
24. 3J-7354 [2] SEAL-O-RING  
25. 8N-9374 [1] GASKET  
26. 7W-0683 [1] COVER-GALLERY  
27. 0S-1615 [14] BOLT  
28. 9S-4182 [2] PLUG (O-RING)  
29. 7E-4847 [6] SEAL-O-RING  
30. 2W-3413 [6] PUMP GP-FUEL INJECTION  
    (EACH INCLUDES)
  2W-3409 [1] BONNET-VALVE  
31. 1W-6982 [1] VALVE AS-CHECK  
32. 8N-5993 [1] SPRING-FLOW CHECK  
33. 1N-3257 [1] RING-RETAINER  
34. 2W-3414 C [1] PLUNGER & BARREL AS  
35. 1W-0931 [6] LIFTER AS  
36. 8N-0672 [6] SPACER-FUEL PUMP TIMING  
37. 1W-5785 [1] COVER  
38. 9S-8007 [2] PLUG-O-RING  
39. 7J-0204 [2] SEAL-O-RING  
40. 9S-8003 [1] PLUG-O-RING  
41. 1J-9671 [1] SEAL-O-RING  
42. 7C-6617 C [6] BUSHING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14340652
 

4P-1384: PUMP GP-FUEL INJECTION

4P1384 PUMP GP-FUEL INJECTION
TYPE 1. S/N 6TB7579-UP
7E6006-PAGE 183.02
PART OF 2W9115 GOVERNOR & FUEL INJECTION PUMP
c514888 SEBP1434
4P1384 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-5887 [1] HOUSING AS-FUEL PUMP  
2. 4F-2099 [1] DOWEL  
3. 1S-1953 [1] BEARING-RACK  
4. 7E-6002 [1] BEARING-SLEEVE  
5. 7E-6003 [1] BEARING-SLEEVE  
6. 7E-6004 [1] BEARING-SLEEVE  
7. 4P-7045 [6] DOWEL  
8. 1W-3285 [1] BEARING-RACK  
9. 4P-8480 [6] PIN-PUMP GUIDE  
10. 6V-5135 [2] SETSCREW-SOCKET  
11. 8N-9367 [1] RACK-REGULATOR  
12. 9S-8001 [1] PLUG-O-RING  
13. 4J-7533 [1] SEAL-O-RING  
14. 8E-5237 [2] RACE-THRUST  
15. 7L-3326 [1] BEARING-THRUST  
16. 9N-1545 [2] RACE-THRUST  
17. 3S-8022 [1] BEARING-THRUST  
18. 4P-1379 [1] RING-GUIDE  
19. 4P-1349 [1] CAMSHAFT-FUEL PUMP  
20. 8N-9371 [1] COVER  
21. 4F-7957 [4] BOLT  
22. 1H-9696 [2] SEAL-O-RING  
23. 4P-2899 [6] BUSHING  
24. 3J-7354 [2] SEAL-O-RING  
25. 8N-9374 [1] GASKET  
26. 7W-0683 [1] COVER-GALLERY  
27. 0S-1615 [14] BOLT  
28. 9S-4182 [2] PLUG  
29. 7E-4847 [6] SEAL-O-RING  
30. 7E-6006 Y [6] PUMP GP-FUEL INJECTION  
31. 1J-9671 [1] SEAL-O-RING  
32. 9S-8003 [1] PLUG-O-RING  
33. 7J-0204 [2] SEAL-O-RING  
34. 9S-8007 [2] PLUG-O-RING  
35. 7E-6011 [6] LIFTER AS  
36. 7E-9907 [6] SPACER-FUEL PUMP TIMING  
37. 1W-5785 [1] COVER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP14340653
 

4P-1384: PUMP GP-FUEL INJECTION

4P1384 PUMP GP-FUEL INJECTION
TYPE 2. S/N 6TB7579-UP
4P7681-PAGE 183.02.01
PART OF 2W9115 GOVERNOR & FUEL INJECTION PUMP
c535820 SEBP1434
4P1384 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-5887 [1] HOUSING AS-FUEL PUMP  
2. 4F-2099 [1] DOWEL  
3. 1S-1953 [1] BEARING-RACK  
4. 7E-6002 [1] BEARING-SLEEVE  
5. 7E-6003 [1] BEARING-SLEEVE  
6. 7E-6004 [1] BEARING-SLEEVE  
7. 4P-7045 [6] DOWEL  
8. 1W-3285 [1] BEARING-RACK  
9. 4P-8480 [6] PIN-PUMP GUIDE  
10. 6V-5135 [2] SETSCREW-SOCKET  
11. 8N-9367 [1] RACK-REGULATOR  
12. 9S-8001 [1] PLUG-O-RING  
13. 4J-7533 [1] SEAL-O-RING  
14. 8E-5237 [2] RACE-THRUST  
15. 7L-3326 [1] BEARING-THRUST  
16. 9N-1545 [2] RACE-THRUST  
17. 3S-8022 [1] BEARING-THRUST  
18. 4P-1379 [1] RING-GUIDE  
19. 4P-1349 [1] CAMSHAFT-FUEL PUMP  
20. 8N-9371 [1] COVER  
21. 4F-7957 [4] BOLT  
22. 1H-9696 [2] SEAL-O-RING  
23. 4P-2899 [6] BUSHING  
24. 3J-7354 [2] SEAL-O-RING  
25. 8N-9374 [1] GASKET  
26. 7W-0683 [1] COVER-GALLERY  
27. 0S-1615 [14] BOLT  
28. 9S-4182 [2] PLUG  
29. 7E-4847 [6] SEAL-O-RING  
30. 4P-7681 CY [6] PUMP GP-FUEL INJECTION  
31. 1J-9671 [1] SEAL-O-RING  
32. 9S-8003 [1] PLUG-O-RING  
33. 7J-0204 [2] SEAL-O-RING  
34. 9S-8007 [2] PLUG-O-RING  
35. 7E-6011 [6] LIFTER AS  
36. 7E-9907 [6] SPACER-FUEL PUMP TIMING  
37. 1W-5785 [1] COVER  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14340654
 

4P-1384: PUMP GP-FUEL INJECTION

4P1384 PUMP GP-FUEL INJECTION
TYPE 3. S/N 6TB7579-UP
1086633-PAGE 183.02.01
c718451 SEBP1434
4P1384 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-5887 [1] HOUSING AS-FUEL PUMP  
2. 4F-2099 [1] DOWEL  
3. 1S-1953 [1] BEARING-RACK  
4. 7E-6002 [1] BEARING-SLEEVE  
5. 7E-6003 [1] BEARING-SLEEVE  
6. 7E-6004 [1] BEARING-SLEEVE  
7. 4P-7045 [6] DOWEL  
8. 1W-3285 [1] BEARING-RACK  
9. 4P-8480 [6] PIN-PUMP GUIDE  
10. 6V-5135 [2] SETSCREW-SOCKET  
11. 8N-9367 [1] RACK-REGULATOR  
12. 9S-8001 [1] PLUG-O-RING  
13. 109-9685 C [1] SEAL-O-RING  
14. 8E-5237 [2] RACE-THRUST  
15. 7L-3326 [1] BEARING-THRUST  
16. 9N-1545 [2] RACE-THRUST  
17. 3S-8022 [1] BEARING-THRUST  
18. 4P-1379 [1] RING-GUIDE  
19. 4P-1349 [1] CAMSHAFT-FUEL PUMP  
20. 8N-9371 [1] COVER  
21. 4F-7957 [4] BOLT  
22. 8J-4351 C [2] SEAL-O-RING  
23. 113-7794 C [6] BUSHING  
24. 3J-7354 [2] SEAL-O-RING  
25. 144-0482 [1] GASKET  
26. 7W-0683 [1] COVER-GALLERY  
27. 0S-1615 [14] BOLT  
28. 9S-4182 [2] PLUG  
29. 131-3719 C [6] SEAL-O-RING  
30. 108-6633 CY [6] PUMP GP-FUEL INJECTION  
31. 109-3206 C [1] SEAL-O-RING  
32. 9S-8003 [1] PLUG-O-RING  
33. 5P-7813 C [2] SEAL-O-RING  
34. 9S-8007 [2] PLUG-O-RING  
35. 7E-6011 [6] LIFTER AS  
36. 7E-9907 [6] SPACER-FUEL PUMP TIMING  
37. 1W-5785 [1] COVER  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14340655
 

7C-3222: PUMP GP-FUEL INJECTION

7C3222 PUMP GP-FUEL INJECTION-PART 1 OF 2
S/N 6TB3525-7578
PART OF 7C6533 GOVERNOR & FUEL INJECTION PUMP
c756587 SEBP1434
7C3222 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3102 [1] CAMSHAFT-FUEL PUMP  
2. 6V-5135 [1] SETSCREW-SOCKET  
3. 1W-4874 [1] RING-GUIDE  
4. 1H-9696 [1] SEAL-O-RING  
5. 1W-5785 [1] COVER  
6. 9S-4182 [2] PLUG  
  3J-7354 [2] SEAL-O-RING  
7. 4F-7957 [2] BOLT  
8. 4P-0987 [1] HOUSING AS-FUEL PUMP  
9. 1W-3285 [1] BEARING-RACK  
10. 4P-7045 [6] DOWEL  
11. 4F-2099 [1] DOWEL  
12. 1S-1953 [1] BEARING-RACK  
13. 4P-0986 [1] BEARING-CAM  
14. 4P-0985 [1] BEARING-CAM  
15. 4P-8480 [6] PIN-PUMP GUIDE  
16. 4P-0984 [1] BEARING-CAM  
17. 9S-8003 [1] PLUG-O-RING  
  1J-9671 [1] SEAL-O-RING  
18. 9J-0114 [2] RACE-THRUST  
19. 7D-1189 [1] BEARING-THRUST  
20. 7C-2568 [1] SCREEN AS  
21. 0S-1615 [14] BOLT  
22. 7W-0683 [1] COVER-GALLERY  
  8N-9374 [1] GASKET  
23. 9S-8001 [1] PLUG-O-RING  
  4J-7533 [1] SEAL-O-RING  
24. 8N-9367 [1] RACK-REGULATOR  
25. 9S-8007 [2] PLUG-O-RING  
  7J-0204 [2] SEAL-O-RING  
26. 8E-5237 [2] RACE-THRUST  
  7L-3326 [1] BEARING-THRUST  
 

#SEBP14340656
 

7C-3222: PUMP GP-FUEL INJECTION

7C3222 PUMP GP-FUEL INJECTION-PART 2 OF 2
S/N 6TB3525-7578
PART OF 7C6533 GOVERNOR & FUEL INJECTION PUMP
c756588 SEBP1434
7C3222 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
27. 8N-0672 [6] SPACER-FUEL PUMP TIMING  
28. 7E-4847 [6] SEAL-O-RING  
29. 7C-6617 C [6] BUSHING-TERMINAL  
30. 4F-7957 [2] BOLT  
31. 8N-9371 [1] COVER  
32. 1H-9696 [1] SEAL-O-RING  
33. 7E-6011 [6] LIFTER AS  
34. 2W-3413 [6] PUMP GP-FUEL INJECTION  
    (EACH INCLUDES)
  2W-3409 [1] BONNET-VALVE  
35. 1N-3257 [1] RING-RETAINER  
36. 1W-6982 [1] VALVE AS-CHECK  
37. 8N-5993 [1] SPRING-FLOW CHECK  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14340657
 

4P-1415: PUMP GP-FUEL INJECTION

4P1415 PUMP GP-FUEL INJECTION-PART 1 OF 2
TYPE 1. S/N 6TB7579-UP
PART OF 7C6533 GOVERNOR & FUEL INJECTION PUMP
c750870 SEBP1434
4P1415 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-1350 [1] CAMSHAFT-FUEL PUMP  
2. 6V-5135 [2] SETSCREW-SOCKET  
3. 4P-1379 [1] RING-GUIDE  
4. 1H-9696 [1] SEAL-O-RING  
5. 1W-5785 [1] COVER  
6. 9S-4182 [2] PLUG  
  3J-7354 [2] SEAL-O-RING  
7. 4F-7957 [2] BOLT  
8. 7E-5887 [1] HOUSING AS-FUEL PUMP  
9. 1W-3285 [1] BEARING-RACK  
10. 4P-7045 [6] DOWEL  
11. 4F-2099 [1] DOWEL  
12. 1S-1953 [1] BEARING-RACK  
13. 7E-6002 [1] BEARING-SLEEVE  
14. 7E-6003 [1] BEARING-SLEEVE  
15. 4P-8480 [6] PIN-PUMP GUIDE  
16. 7E-6004 [1] BEARING-SLEEVE  
17. 8E-5237 [2] RACE-THRUST  
  7L-3326 [1] BEARING-THRUST  
18. 9N-1545 [2] RACE-THRUST  
19. 3S-8022 [1] BEARING-THRUST  
20. 9S-8003 [1] PLUG-O-RING  
  1J-9671 [1] SEAL-O-RING  
21. 0S-1615 [14] BOLT  
22. 7W-0683 [1] COVER-GALLERY  
  8N-9374 [1] GASKET  
23. 9S-8001 [1] PLUG-O-RING  
  4J-7533 [1] SEAL-O-RING  
24. 8N-9367 [1] RACK-REGULATOR  
25. 9S-8007 [2] PLUG-O-RING  
  7J-0204 [2] SEAL-O-RING  
 

#SEBP14340658
 

4P-1415: PUMP GP-FUEL INJECTION

4P1415 PUMP GP-FUEL INJECTION-PART 2 OF 2
TYPE 1. S/N 6TB7579-UP
7E6006-PAGE 183.02
PART OF 7C6533 GOVERNOR & FUEL INJECTION PUMP
c750871 SEBP1434
4P1415 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
26. 7E-9907 [6] SPACER-FUEL PUMP TIMING  
27. 7E-4847 [6] SEAL-O-RING  
28. 4P-2899 [6] BUSHING-TERMINAL  
29. 4F-7957 [2] BOLT  
30. 8N-9371 [1] COVER  
31. 1H-9696 [1] SEAL-O-RING  
32. 7E-6011 [6] LIFTER AS  
33. 7E-6006 Y [6] PUMP GP-FUEL INJECTION  
  Y   SEPARATE ILLUSTRATION
 

#SEBP14340659
 

4P-1415: PUMP GP-FUEL INJECTION

4P1415 PUMP GP-FUEL INJECTION-PART 1 OF 2
TYPE 2. S/N 6TB7579-UP
PART OF 7C6533 GOVERNOR & FUEL INJECTION PUMP
c750870 SEBP1434
4P1415 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-1350 [1] CAMSHAFT-FUEL PUMP  
2. 6V-5135 [2] SETSCREW-SOCKET  
3. 4P-1379 [1] RING-GUIDE  
4. 1H-9696 [1] SEAL-O-RING  
5. 1W-5785 [1] COVER  
6. 9S-4182 [2] PLUG  
  3J-7354 [2] SEAL-O-RING  
7. 4F-7957 [2] BOLT  
8. 7E-5887 [1] HOUSING AS-FUEL PUMP  
9. 1W-3285 [1] BEARING-RACK  
10. 4P-7045 [6] DOWEL  
11. 4F-2099 [1] DOWEL  
12. 1S-1953 [1] BEARING-RACK  
13. 7E-6002 [1] BEARING-SLEEVE  
14. 7E-6003 [1] BEARING-SLEEVE  
15. 4P-8480 [6] PIN-PUMP GUIDE  
16. 7E-6004 [1] BEARING-SLEEVE  
17. 8E-5237 [2] RACE-THRUST  
  7L-3326 [1] BEARING-THRUST  
18. 9N-1545 [2] RACE-THRUST  
19. 3S-8022 [1] BEARING-THRUST  
20. 9S-8003 [1] PLUG-O-RING  
  1J-9671 [1] SEAL-O-RING  
21. 0S-1615 [14] BOLT  
22. 7W-0683 [1] COVER-GALLERY  
  8N-9374 [1] GASKET  
23. 9S-8001 [1] PLUG-O-RING  
  4J-7533 [1] SEAL-O-RING  
24. 8N-9367 [1] RACK-REGULATOR  
25. 9S-8007 [2] PLUG-O-RING  
  7J-0204 [2] SEAL-O-RING  
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Use New Adapter To Make Tests Of 9L6884 Nozzles
1979/05/09
Improvements To Optional Modification Of 5P4150 Nozzle Tester
1981/08/26
Explanation Of Differences In Timing Advance Information
1981/08/26
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
Service Information For Woodward Governors
1983/10/26
New Valve Lifter Assemblies Used In Valve Mechanism Groups
1983/11/30
Overvoltage Protection For Woodward 2301 Governor
1984/04/11
New Valve Assembly And Seal Used In Fuel Transfer Pump
1984/05/16
New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used
1984/10/24
Bonnet Of Fuel Injection Pump Group Now Serviced Separately
1984/12/12
Fill Oil Sump Before Installing Woodward Governor
1985/01/16
New Tools Available To Service Fuel Injection Nozzles And Adapters
1985/01/16
Over Fueling Spring No Longer Used In Governor
1985/03/01
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01
Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced
1985/05/01
Thread Lock Now Used On Timing Advance Bolts
1985/08/01
Eliminating Interference Between Governor Housing And Tachometer Drive
1985/08/01
Location Of 6V5135 Setscrews In Fuel Pump Group
1985/08/01
Special Instruction Available To Salvage Governor Housing
1985/08/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Fuel Transfer Pump Improved
1985/11/01
Check Fuel Injection Replacement Pump Installation
1985/11/01
Special Bolts Help Prevent Unauthorized Modification Of Fuel System And Governor Settings
1985/12/01
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
FT Tooling Prints Available For Bushing Installation In Governor Housing
1986/05/01
More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
New Material Used For Disc In Valve Assemblies In Fuel Transfer Pump Groups
1986/09/01
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed
1986/10/01
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles
1986/10/01
Improved Retaining Bushing In Fuel Injection Pump
1986/12/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters
1987/10/01
Improved Valve Mechanism Cover Groups
1988/01/01
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles
1989/03/01
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque
1989/09/01
Governor Control Motor Polarity May Require A Change
1990/11/01
Corrections For Systems Operation, Troubleshooting, And Specifications For 2301 Electric Governors For Generator Set And Industrial Engines, SENR2928-01
1991/05/01
New Speed Setting Clutch Group For 3161 Woodward Governors
1991/06/01
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings
1991/10/01
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings
1992/01/01
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN)
1992/04/01
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks
1992/08/01
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly
1992/09/01
New Bonnet Used In Fuel Injection Pump Group
1993/06/01
Fuel Injection Pump Improvements{1251}
1994/02/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/01
Fuel Injection Nozzle Spray Orifice Plugging{1254}
1994/07/01
New Seals In Pump Fastener Group And Fuel Injection Pump Group Have Improved Heat Set Resistance {1251}
1994/09/01
Pressure Compensated Simple Governor (PSG Governor) Changes From Aluminum To Cast Iron Housing {1264}
1995/04/01
Fuel Injection Pump Barrel Sealing Face Reconditioning{1251}
1996/03/19
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
New Governor Weight And Race Increase Durability {1264}
1996/09/23
Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/23
Fuel Injection Pump Bushings Have New Groove Adjacent To Load Ring {1251}
1996/11/01
New O-Ring Seals Used On "Through-Head-Adapter" And "Internal Fuel Lines" In Fuel Injection Lines Groups{1252}
1996/11/01
Improved Bushing O-Ring Seal Available For Injection Pump Groups{1251}
1997/03/01
Improvements Made To Remanufactured 0R-3008 Fuel Transfer Pump{1256}
1997/03/01
3406C Pump And Governor Changes Provide Improved Oil And Fuel Leak Resistence{7555}
1997/09/15
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
The Edge Filter Is Now Removed from Fuel Nozzles {1254, 1290}
2007/08/20
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Improved Manufacturing Processes Are Used for Remanufactured Fuel Injector Nozzles That Are Used in Certain Commercial Engines {1251, 1290}
2012/07/06
Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain Commercial Engines {1250, 1251, 1290, 1713}
2013/10/17
Cat® Reman Announces New Fuel Pump, Fuel Ratio Control, and Fuel Injector Options for Certain Engines {1251, 1278}
2014/09/05
Special Instruction
Use of 6V6070 Governor Adjusting Tool Group{1250}
Use of 6V6070 Governor Adjusting Tool Group{1250}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
3406 New Scroll Fuel System (NSFS) Camshaft Plugs{1110}
3406 New Scroll Fuel System (NSFS) Camshaft Plugs{1110}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles{1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Service Letter-Australia
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TORQUEING THE GOVERNOR SHAFT BOLT FOR CERTAIN 3406 ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TORQUEING THE GOVERNOR SHAFT BOLT FOR CERTAIN 3406 ENGINES.
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Valve Bonnets with Insufficient Hardness
Valve Bonnets with Insufficient Hardness
Specifications
Fuel Injection Nozzle And Adapter<BR> (4TB470-Up), (6TB1779-Up)
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzle And Adapter
3406B INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3406B INDUSTRIAL & MARINE ENGINES
Governor And Fuel Pump Drive Group<BR> (Automatic Timing Advance Unit)
3406B INDUSTRIAL & MARINE ENGINES
Woodward PSG Governor
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
Governor Controls
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
Governor Linkage
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
Fuel Injection Nozzle And Adapter
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3406C INDUSTRIAL & MARINE ENGINES
Governor and Fuel Pump Drive Group
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Lines
3406C INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Governor Control
3406C INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TORQUEING THE GOVERNOR SHAFT BOLT FOR CERTAIN 3406 ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TORQUEING THE GOVERNOR SHAFT BOLT FOR CERTAIN 3406 ENGINES.
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Transfer Pump
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump And Governor Drive
3406B INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Line Adapters
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump And Governor
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3406B INDUSTRIAL & MARINE ENGINES
Rocker Shaft Assemblies
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzles
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzle Adapters
3406B INDUSTRIAL & MARINE ENGINES
Service Meter
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump &amp; Governor Drive
3406C INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump &amp; Governor
3406C INDUSTRIAL & MARINE ENGINES
Governor (Industrial Engine)
3406C INDUSTRIAL & MARINE ENGINES
Governor (Marine Engine)
3406C INDUSTRIAL & MARINE ENGINES
Governor
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzles (Earlier)
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzle Adapters (Earlier)
3406C INDUSTRIAL & MARINE ENGINES
Service Magazine
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Part Number For Fuel Injection Pump Group In New Location{1253,1286}
1981/11/09
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage{1264}
1984/05/14
New Valve Assembly And Seal Used In Fuel Transfer Pump{1256}
1984/05/14
New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used{1101,1106}
1984/10/29
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Bonnet Of Fuel Injection Pump Group Now Serviced Separately{1251,1250}
1984/12/10
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
New Tools Available To Service Fuel Injection Nozzles And Adapters {0706,1254}
1985/01/14
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Over Fueling Spring No Longer Used In Governor{1264,1250}
1985/02/04
Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced{1254}
1985/03/18
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Extra Injection Nozzle Clamp Helps Prevent Injection Nozzle Damage{1252}
1985/07/15
Eliminating Interference Between Governor Housing And Tachometer Drive{1264,7487}
1985/08/12
Location Of 6V5135 Setscrews In Fuel Pump Group{1250}
1985/08/12
Thread Lock Now Used On Timing Advance Bolts{1272}
1985/08/12
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Steel Fuel Pump Lifter Used{1250,1251}
1985/09/02
Fuel Transfer Pump Improved{1256}
1985/10/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Check Fuel Injection Replacement Pump Installation{1251,1253,1257}
1985/10/28
Special Bolts Help Prevent Unauthorized Modification Of Fuel System And Governor Settings{1250,1264,1278,1287}
1985/11/11
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups{1265,1264,1250}
1986/06/02
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved Retaining Bushing In Fuel Injection Pump {1251,1250}
1986/12/01
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
New Retainer And Improved Housing Keep Water Pump Bearing Tight; Repair For Loosened Bearing{1361}
1977/04/11
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
Governor Control Motor Polarity May Require A Change{1265,1408,7556}
1990/10/29
New Speed Setting Clutch Group For 3161 Woodward Governors{1265}
1991/05/20
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings{1253}
1991/09/30
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings{1253}
1992/01/20
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks{1201,1253}
1992/08/31
Major Engine Component Changes{1201,1202,1205,1218,1219,1230,1253,1288,1331}
1992/09/07
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly{1251,1253,1281,1292}
1992/09/21
New Bonnet Used In Fuel Injection Pump Group {1251}
1993/06/14
Camshaft Lobe Surface Finish Improved; Camshaft Drive Gear Installation Procedure {1209,1210,1212}
1993/09/13
Fuel Injection Pump Improvements{1251}
1994/02/07
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
3406C Pump And Governor Changes Provide Improved Oil And Fuel Leak Resistence{7555}
1997/09/08
The Procedure for the Removal of the Electronic Unit Injector has Changed. {1290}
2004/05/10
Troubleshooting Engines with New Scroll Fuel Systems (NSFS) {1254}
2006/01/02
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Caterpillar Parts SIS Catalog 3406B :

PUMP GP-FUEL INJECTION
4P-1383 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1383 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1383 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
108-6630 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4W-2547 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4W-2547 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4W-2547 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4W-2547 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
2W-6972 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1384 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1384 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1384 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7C-3222 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7C-3222 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1415 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1415 PUMP GP-FUEL INJECTION

Truck sale:

1990 CAT 3406B
USD $25,000 
1990 CAT 3406B

Power Generation Enterprises Inc.
North Hollywood, California
1991 CAT 3406B
USD $22,000 
1991 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
1989 CAT 3406B
USD $35,000 
1989 CAT 3406B

Worldwide Power Products LLC
Houston, Texas
1988 CAT 3406B
USD $29,000 
1988 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
CATERPILLAR 3406B 1988
$29,000 USD 
CATERPILLAR 3406B 1988
- MARINE - PROPULSION
RANSOME ENGINE POWER
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.