AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4P1415 PUMP GP-FUEL INJECTION-PART 2 OF 2 TYPE 2. S/N 6TB7579-UP 4P7681-PAGE 183.02.01 PART OF 7C6533 GOVERNOR & FUEL INJECTION PUMP 3406B


FUEL SYSTEM
PUMP GP-FUEL INJECTION
GOVERNOR GP

ENGINE - MACHINE 3406B ENGINE - MACHINE 6TB
 3406B INDUSTRIAL ENGINE 6TB00001-09165 SEBP1434 3406B 6TB   (2018)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1415 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1415 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1415 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1415 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1415 PUMP GP-FUEL INJECTION
FASTENER GP-FUEL INJ PUMP
9Y-4913 FASTENER GP-FUEL INJ PUMP
 

#SEBP14340660
 

4P-1415: PUMP GP-FUEL INJECTION

4P1415 PUMP GP-FUEL INJECTION-PART 2 OF 2
TYPE 2. S/N 6TB7579-UP
4P7681-PAGE 183.02.01
PART OF 7C6533 GOVERNOR & FUEL INJECTION PUMP
c750924 SEBP1434
4P1415 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
26. 7E-9907 [6] SPACER-FUEL PUMP TIMING  
27. 7E-4847 [6] SEAL-O-RING  
28. 4P-2899 [6] BUSHING-TERMINAL  
29. 4F-7957 [2] BOLT  
30. 8N-9371 [1] COVER  
31. 1H-9696 [1] SEAL-O-RING  
32. 7E-6011 [6] LIFTER AS  
33. 4P-7681 CY [6] PUMP GP-FUEL INJECTION  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14340661
 

4P-1415: PUMP GP-FUEL INJECTION

4P1415 PUMP GP-FUEL INJECTION-PART 1 OF 2
TYPE 3. S/N 6TB7579-UP
PART OF 7C6533 GOVERNOR & FUEL INJECTION PUMP
c750941 SEBP1434
4P1415 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-1350 [1] CAMSHAFT-FUEL PUMP  
2. 6V-5135 [2] SETSCREW-SOCKET  
3. 4P-1379 [1] RING-GUIDE  
4. 8J-4351 C [1] SEAL-O-RING (44.04MM ID)  
5. 1W-5785 [1] COVER  
6. 9S-4182 [2] PLUG (7/16-20 THD)  
  3J-7354 [2] SEAL-O-RING (8.92MM ID)  
7. 4F-7957 [2] BOLT (1/4-20X.875IN)  
8. 7E-5887 [1] HOUSING AS-FUEL PUMP  
9. 1W-3285 [1] BEARING-RACK  
10. 4P-7045 [6] DOWEL  
11. 4F-2099 [1] DOWEL  
12. 1S-1953 [1] BEARING-RACK  
13. 7E-6002 [1] BEARING-SLEEVE  
14. 7E-6003 [1] BEARING-SLEEVE  
15. 4P-8480 [6] PIN-PUMP GUIDE  
16. 7E-6004 [1] BEARING-SLEEVE  
17. 8E-5237 [2] RACE-THRUST  
  7L-3326 [1] BEARING-THRUST  
18. 9N-1545 [2] RACE-THRUST  
19. 3S-8022 [1] BEARING-THRUST  
20. 9S-8003 [1] PLUG-O-RING (1/2-20 THD)  
  109-3206 C [1] SEAL-O-RING (10.52MM ID)  
21. 0S-1615 [14] BOLT (1/4-20X.75IN)  
22. 7W-0683 [1] COVER-GALLERY  
  144-0482 [1] GASKET  
23. 9S-8001 [1] PLUG-O-RING (5/16-24 THD)  
  109-9685 C [1] SEAL-O-RING  
24. 8N-9367 [1] RACK-REGULATOR  
25. 9S-8007 C [2] PLUG-O-RING (3/8-24 THD)  
  5P-7813 [2] SEAL-O-RING (7.65MM ID)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14340662
 

4P-1415: PUMP GP-FUEL INJECTION

4P1415 PUMP GP-FUEL INJECTION-PART 2 OF 2
TYPE 3. S/N 6TB7579-UP
1086633-PAGE 183.02.01
PART OF 7C6533 GOVERNOR & FUEL INJECTION PUMP
c750942 SEBP1434
4P1415 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
26. 7E-9907 [6] SPACER-FUEL PUMP TIMING  
27. 131-3719 C [6] SEAL-O-RING  
28. 113-7794 C [6] BUSHING  
29. 4F-7957 [2] BOLT (1/4-20X.875IN)  
30. 8N-9371 [1] COVER  
31. 8J-4351 C [1] SEAL-O-RING (44.04MM ID)  
32. 7E-6011 [6] LIFTER AS  
33. 108-6633 CY [6] PUMP GP-FUEL INJECTION  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14340663
 

9Y-4913: FASTENER GP-FUEL INJ PUMP

9Y4913 FASTENER GP
S/N 6TB5626-UP
PART OF 7C6533 PUMP-GOVERNOR & FUEL INJECTION
c465677 SEBP1434
9Y4913 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-5894 [4] BOLT  
2. 7B-2742 [2] BOLT  
3. 8S-4710 [4] BOLT  
4. 1B-2716 [2] BOLT  
5. 4F-7957 [2] BOLT  
6. 8F-8178 [1] BOLT  
7. 7X-0869 [1] BOLT-LOCKING  
8. 5P-0537 [2] WASHER  
 

#SEBP14340664
 

7C-5890: FASTENER GP-GOVERNOR

7C5890 FASTENER GP
S/N 6TB3525-5625
PART OF 7C6533 PUMP-GOVERNOR & FUEL INJECTION
c454181 SEBP1434
7C5890 FASTENER GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1615 C [2] BOLT  
2. 7B-2742 [2] BOLT  
3. 8C-6411 [2] BOLT-12 POINT HEAD  
4. 8S-4710 [4] BOLT  
5. 1B-2716 [2] BOLT  
6. 4F-7957 [2] BOLT  
7. 8F-8178 [1] BOLT  
8. 7X-0869 C [1] BOLT-LOCKING  
9. 6V-5894 [2] BOLT (LOCK WIRE)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14340665
 

2W-7325: GOVERNOR GP

2W7325 GOVERNOR GP-PART 1 OF 2
TYPE 1
PART OF 2W8538, 2W8539, 2W8541, 2W9104,
2W9115 GOVERNOR & FUEL INJECTION PUMPS
c756161 SEBP1434
2W7325 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-3256 [1] COLLAR-LOAD STOP  
2. 4B-2049 [1] NUT  
3. 5H-6552 [1] SETSCREW-SOCKET  
4. 8N-3956 [1] BLOCK AS-STOP  
  8N-3303 [1] DOWEL  
5. 1W-4243 [1] SPRING-BUMPER  
6. 8N-3772 [1] BOLT-LOAD STOP  
7. 6D-3897 [1] BOLT  
8. 6L-5551 [2] BOLT-SOCKET HEAD  
 

#SEBP14340666
 

2W-7325: GOVERNOR GP

2W7325 GOVERNOR GP-PART 2 OF 2
TYPE 1. 2W0797-PAGE 196
PART OF 2W8538, 2W8539, 2W8541, 2W9104,
2W9115 GOVERNOR & FUEL INJECTION PUMPS
c756162 SEBP1434
2W7325 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
9. 2M-7819 [2] RING-RETAINING  
10. 2W-0797 Y [1] GOVERNOR GP  
11. 2W-2216 [1] SPRING-LINK  
12. 1N-3800 [1] SLEEVE-RACK CONTROL  
13. 031-0216 [3] BOLT  
14. 8N-9678 [1] PISTON AS-SERVO  
  8N-3757 [1] LEVER-CONTROL  
  3G-3835 [1] PIN  
  8N-2505 [1] VALVE-GOVERNOR SERVO  
15. 5P-9757 [1] SEAL-O-RING  
16. 1W-4098 [1] PISTON-GOVERNOR SERVO  
17. 1N-3802 [1] SEAT-SPRING  
18. 1S-5440 [4] DOWEL  
19. 7M-7219 [1] BEARING-THRUST  
20. 5P-9087 [4] BOLT-12 POINT HEAD  
21. 4N-9019 [1] DOWEL  
22. 8N-2510 [1] SHAFT-WEIGHT CARRIER  
23. 4N-2953 [1] LOCKRING  
24. 4N-2927 [2] RACE-THRUST BEARING  
25. 8N-2511 C [1] CARRIER-WEIGHT  
26. 7N-7264 [4] WEIGHT-GOVERNOR  
27. 7N-7265 [1] SHIELD-WEIGHT CARRIER  
28. 8N-9680 [1] HOUSING AS-GOVERNOR  
  8S-6814 [4] PIN (LONG)  
  4F-6024 [2] PIN (SHORT)  
29. 2W-6092 [1] RISER-GOVERNOR  
30. 7N-7267 [1] SPRING  
31. 7N-7269 [1] DASHPOT AS-GOVERNOR  
  4N-6410 [1] SPRING-DASHPOT  
  4N-6408 [1] PISTON AS  
  4N-6407 [1] SPOOL-DASHPOT  
  4N-6406 [1] RING-SPACER  
  4N-6404 [1] RING-RETAINING  
32. 2P-9556 [1] WASHER  
  2N-0828 [2] WASHER  
33. 6N-3504 [1] SEAT-GOVERNOR SPRING  
34. 7N-8821 [2] RING-RETAINING  
35. 3K-5733 [1] SPRING  
36. 7N-7270 [2] SLEEVE-SPRING  
37. 4N-0432 [1] BALL BEARING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14340667
 

2W-7325: GOVERNOR GP

2W7325 GOVERNOR GP-PART 1 OF 3
TYPE 2
PART OF 2W8539, 2W8541, 2W9104,
2W9115 GOVERNOR & FUEL INJECTION PUMPS
c756174 SEBP1434
2W7325 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-3256 [1] COLLAR-LOAD STOP  
2. 4B-2049 [1] NUT  
3. 5H-6552 [1] SETSCREW-SOCKET  
4. 8N-3956 [1] BLOCK AS-STOP  
  8N-3303 [1] DOWEL  
5. 1W-4243 [1] SPRING-BUMPER  
6. 8N-3772 [1] BOLT-LOAD STOP  
7. 6D-3897 [1] BOLT  
8. 6L-5551 [2] BOLT-SOCKET HEAD  
9. 8N-3776 C [1] GASKET-COVER  
10. 9S-8003 C [1] PLUG-O-RING  
  1J-9671 C [1] SEAL-O-RING  
11. 1N-3887 C [1] SETSCREW-SOCKET  
  5C-3180 B [1] NUT  
12. 6V-5029 C [1] SEAL-LIP  
13. 1N-3935 C [1] COVER  
  8N-3765 C [1] GASKET  
14. 4N-8445 C [1] BOLT  
15. 4B-1328 C [1] SCREW-MACHINE  
  4B-4277 C [1] WASHER (LARGE)  
  5N-4185 C [1] WASHER-SEAL (SMALL)  
16. 3P-0009 C [1] INSULATOR-STUD  
17. 2N-5919 C [2] BOLT  
18. 8N-3762 C [1] COVER  
  8N-3763 C [1] GASKET  
19. 7W-1749 C [1] COVER AS  
  8S-6814 [1] PIN  
  8T-2604 [1] SEAL-LIP  
20. 1B-2713 C [6] BOLT  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14340668
 

2W-7325: GOVERNOR GP

2W7325 GOVERNOR GP-PART 2 OF 3
TYPE 2
PART OF 2W8539, 2W8541, 2W9104,
2W9115 GOVERNOR & FUEL INJECTION PUMPS
c756175 SEBP1434
2W7325 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
21. 1W-5341 C [1] LEVER-SHUTOFF  
22. 4W-5735 C [1] LEVER AS-PIVOT  
23. 6V-6835 [1] SETSCREW-SOCKET  
  4B-2049 [1] NUT  
24. 4W-5734 C [1] LEVER AS  
25. 6V-6835 [1] SETSCREW-SOCKET  
  4B-2049 [1] NUT  
26. 5H-6552 C [1] SETSCREW-SOCKET  
  4B-2049 C [1] NUT  
27. 4N-5621 C [1] SHAFT-SHUTOFF  
28. 0S-1588 C [1] BOLT  
29. 8N-3760 C [1] COVER  
  8N-3761 C [1] GASKET  
  030-9615 C [4] SCREW-NYLOK  
30. 8N-9679 C [1] HOUSING AS-GOVERNOR  
  5P-3272 [1] SEAL-LIP  
31. 8N-2499 [1] SPRING-GUIDE  
32. 3D-8317 [1] RING-RETAINING  
33. 4N-0260 [1] SEAL-LIP  
34. 1W-3962 C [1] SPACER  
35. 4N-5485 C [1] BODY-VALVE  
  5F-9144 C [1] SEAL-O-RING  
36. 4N-5484 C [1] VALVE-NEEDLE  
  6H-9691 C [1] SEAL-O-RING  
37. 8N-9384 C [1] GASKET  
38. 5H-2532 C [1] KEY-WOODRUFF  
39. 2W-6102 C [1] LEVER-SPRING SEAT  
40. 2W-9305 C [2] PLATE-THROTTLE  
41. 1W-5339 C [1] SHAFT AS-GOVERNOR  
42. 2W-9996 C [1] SCREW-IDLE STOP  
43. 4W-9362 C [1] LOCKNUT  
44. 7N-2172 C [2] PIN  
45. 2W-8987 C [1] STOP-IDLE DETENT  
46. 7N-2176 C [1] PIN-DETENT  
47. 7N-1052 C [1] DOWEL  
48. 7N-2171 C [4] RING-RETAINING  
49. 2M-7819 C [1] RING-RETAINING  
50. 2W-0800 C [1] LEVER-SHUTOFF  
51. 2W-0799 C [1] SPRING-SHUTOFF  
52. 2W-0801 C [1] SHAFT-GOVERNOR CONTROL  
53. 8S-7803 C [1] RING-RETAINING  
54. 1W-3961 C [1] SPACER  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14340669
 

2W-7325: GOVERNOR GP

2W7325 GOVERNOR GP-PART 3 OF 3
TYPE 2
PART OF 2W8539, 2W8541, 2W9104,
2W9115 GOVERNOR & FUEL INJECTION PUMPS
c756176 SEBP1434
2W7325 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3406B ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
55. 2M-7819 [2] RING-RETAINING  
56. 7N-7270 [2] SLEEVE-SPRING  
57. 2W-2216 [1] SPRING-LINK  
58. 1N-3800 [1] SLEEVE-RACK CONTROL  
59. 031-0216 [3] BOLT  
60. 8N-9678 [1] PISTON AS-SERVO  
  8N-3757 [1] LEVER-CONTROL  
  3G-3835 [1] PIN  
  8N-2505 [1] VALVE-GOVERNOR SERVO  
61. 5P-9757 [1] SEAL-O-RING  
62. 1W-4098 [1] PISTON-GOVERNOR SERVO  
63. 1N-3802 [1] SEAT-SPRING  
64. 1S-5440 [4] DOWEL  
65. 7M-7219 [1] BEARING-THRUST  
66. 5P-9087 [4] BOLT-12 POINT HEAD  
67. 4N-9019 [1] DOWEL  
68. 8N-2510 [1] SHAFT-WEIGHT CARRIER  
69. 4N-2953 [1] LOCKRING  
70. 4N-2927 [2] RACE-THRUST BEARING  
71. 8N-2511 [1] CARRIER-WEIGHT  
72. 7N-7264 [4] WEIGHT-GOVERNOR  
73. 4N-0432 [1] BALL BEARING  
74. 8N-9680 [1] HOUSING AS-GOVERNOR  
  8S-6814 [4] PIN (LONG)  
  4F-6024 [2] PIN (SHORT)  
75. 2W-6092 [1] RISER-GOVERNOR  
76. 7N-7267 [1] SPRING  
77. 7N-7269 [1] DASHPOT AS-GOVERNOR  
  4N-6410 [1] SPRING-DASHPOT  
  4N-6408 [1] PISTON AS  
  4N-6407 [1] SPOOL-DASHPOT  
  4N-6406 [1] RING-SPACER  
  4N-6404 [1] RING-RETAINING  
78. 2P-9556 [1] WASHER  
  2N-0828 [2] WASHER  
79. 6N-3504 [1] SEAT-GOVERNOR SPRING  
80. 7N-8821 [2] RING-RETAINING  
81. 3K-5733 [1] SPRING  
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Use New Adapter To Make Tests Of 9L6884 Nozzles
1979/05/09
Improvements To Optional Modification Of 5P4150 Nozzle Tester
1981/08/26
Explanation Of Differences In Timing Advance Information
1981/08/26
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
Service Information For Woodward Governors
1983/10/26
New Valve Lifter Assemblies Used In Valve Mechanism Groups
1983/11/30
Overvoltage Protection For Woodward 2301 Governor
1984/04/11
New Valve Assembly And Seal Used In Fuel Transfer Pump
1984/05/16
New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used
1984/10/24
Bonnet Of Fuel Injection Pump Group Now Serviced Separately
1984/12/12
Fill Oil Sump Before Installing Woodward Governor
1985/01/16
New Tools Available To Service Fuel Injection Nozzles And Adapters
1985/01/16
Over Fueling Spring No Longer Used In Governor
1985/03/01
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01
Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced
1985/05/01
Thread Lock Now Used On Timing Advance Bolts
1985/08/01
Eliminating Interference Between Governor Housing And Tachometer Drive
1985/08/01
Location Of 6V5135 Setscrews In Fuel Pump Group
1985/08/01
Special Instruction Available To Salvage Governor Housing
1985/08/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Fuel Transfer Pump Improved
1985/11/01
Check Fuel Injection Replacement Pump Installation
1985/11/01
Special Bolts Help Prevent Unauthorized Modification Of Fuel System And Governor Settings
1985/12/01
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
FT Tooling Prints Available For Bushing Installation In Governor Housing
1986/05/01
More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
New Material Used For Disc In Valve Assemblies In Fuel Transfer Pump Groups
1986/09/01
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed
1986/10/01
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles
1986/10/01
Improved Retaining Bushing In Fuel Injection Pump
1986/12/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters
1987/10/01
Improved Valve Mechanism Cover Groups
1988/01/01
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles
1989/03/01
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque
1989/09/01
Governor Control Motor Polarity May Require A Change
1990/11/01
Corrections For Systems Operation, Troubleshooting, And Specifications For 2301 Electric Governors For Generator Set And Industrial Engines, SENR2928-01
1991/05/01
New Speed Setting Clutch Group For 3161 Woodward Governors
1991/06/01
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings
1991/10/01
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings
1992/01/01
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN)
1992/04/01
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks
1992/08/01
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly
1992/09/01
New Bonnet Used In Fuel Injection Pump Group
1993/06/01
Fuel Injection Pump Improvements{1251}
1994/02/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/01
Fuel Injection Nozzle Spray Orifice Plugging{1254}
1994/07/01
New Seals In Pump Fastener Group And Fuel Injection Pump Group Have Improved Heat Set Resistance {1251}
1994/09/01
Pressure Compensated Simple Governor (PSG Governor) Changes From Aluminum To Cast Iron Housing {1264}
1995/04/01
Fuel Injection Pump Barrel Sealing Face Reconditioning{1251}
1996/03/19
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
New Governor Weight And Race Increase Durability {1264}
1996/09/23
Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/23
Fuel Injection Pump Bushings Have New Groove Adjacent To Load Ring {1251}
1996/11/01
New O-Ring Seals Used On "Through-Head-Adapter" And "Internal Fuel Lines" In Fuel Injection Lines Groups{1252}
1996/11/01
Improved Bushing O-Ring Seal Available For Injection Pump Groups{1251}
1997/03/01
Improvements Made To Remanufactured 0R-3008 Fuel Transfer Pump{1256}
1997/03/01
3406C Pump And Governor Changes Provide Improved Oil And Fuel Leak Resistence{7555}
1997/09/15
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
The Edge Filter Is Now Removed from Fuel Nozzles {1254, 1290}
2007/08/20
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Improved Manufacturing Processes Are Used for Remanufactured Fuel Injector Nozzles That Are Used in Certain Commercial Engines {1251, 1290}
2012/07/06
Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain Commercial Engines {1250, 1251, 1290, 1713}
2013/10/17
Cat® Reman Announces New Fuel Pump, Fuel Ratio Control, and Fuel Injector Options for Certain Engines {1251, 1278}
2014/09/05
Special Instruction
Use of 6V6070 Governor Adjusting Tool Group{1250}
Use of 6V6070 Governor Adjusting Tool Group{1250}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
3406 New Scroll Fuel System (NSFS) Camshaft Plugs{1110}
3406 New Scroll Fuel System (NSFS) Camshaft Plugs{1110}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles{1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Service Letter-Australia
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TORQUEING THE GOVERNOR SHAFT BOLT FOR CERTAIN 3406 ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TORQUEING THE GOVERNOR SHAFT BOLT FOR CERTAIN 3406 ENGINES.
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Valve Bonnets with Insufficient Hardness
Valve Bonnets with Insufficient Hardness
Specifications
Fuel Injection Nozzle And Adapter<BR> (4TB470-Up), (6TB1779-Up)
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzle And Adapter
3406B INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3406B INDUSTRIAL & MARINE ENGINES
Governor And Fuel Pump Drive Group<BR> (Automatic Timing Advance Unit)
3406B INDUSTRIAL & MARINE ENGINES
Woodward PSG Governor
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
Governor Controls
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
Governor Linkage
3406B INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
Fuel Injection Nozzle And Adapter
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3406C INDUSTRIAL & MARINE ENGINES
Governor and Fuel Pump Drive Group
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Lines
3406C INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Governor Control
3406C INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TORQUEING THE GOVERNOR SHAFT BOLT FOR CERTAIN 3406 ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND TORQUEING THE GOVERNOR SHAFT BOLT FOR CERTAIN 3406 ENGINES.
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Transfer Pump
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump And Governor Drive
3406B INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Line Adapters
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump And Governor
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3406B INDUSTRIAL & MARINE ENGINES
Rocker Shaft Assemblies
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzles
3406B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzle Adapters
3406B INDUSTRIAL & MARINE ENGINES
Service Meter
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump &amp; Governor Drive
3406C INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump &amp; Governor
3406C INDUSTRIAL & MARINE ENGINES
Governor (Industrial Engine)
3406C INDUSTRIAL & MARINE ENGINES
Governor (Marine Engine)
3406C INDUSTRIAL & MARINE ENGINES
Governor
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzles (Earlier)
3406C INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzle Adapters (Earlier)
3406C INDUSTRIAL & MARINE ENGINES
Service Magazine
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Part Number For Fuel Injection Pump Group In New Location{1253,1286}
1981/11/09
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage{1264}
1984/05/14
New Valve Assembly And Seal Used In Fuel Transfer Pump{1256}
1984/05/14
New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used{1101,1106}
1984/10/29
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Bonnet Of Fuel Injection Pump Group Now Serviced Separately{1251,1250}
1984/12/10
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
New Tools Available To Service Fuel Injection Nozzles And Adapters {0706,1254}
1985/01/14
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Over Fueling Spring No Longer Used In Governor{1264,1250}
1985/02/04
Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced{1254}
1985/03/18
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Extra Injection Nozzle Clamp Helps Prevent Injection Nozzle Damage{1252}
1985/07/15
Eliminating Interference Between Governor Housing And Tachometer Drive{1264,7487}
1985/08/12
Location Of 6V5135 Setscrews In Fuel Pump Group{1250}
1985/08/12
Thread Lock Now Used On Timing Advance Bolts{1272}
1985/08/12
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Steel Fuel Pump Lifter Used{1250,1251}
1985/09/02
Fuel Transfer Pump Improved{1256}
1985/10/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Check Fuel Injection Replacement Pump Installation{1251,1253,1257}
1985/10/28
Special Bolts Help Prevent Unauthorized Modification Of Fuel System And Governor Settings{1250,1264,1278,1287}
1985/11/11
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups{1265,1264,1250}
1986/06/02
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved Retaining Bushing In Fuel Injection Pump {1251,1250}
1986/12/01
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
New Retainer And Improved Housing Keep Water Pump Bearing Tight; Repair For Loosened Bearing{1361}
1977/04/11
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
Governor Control Motor Polarity May Require A Change{1265,1408,7556}
1990/10/29
New Speed Setting Clutch Group For 3161 Woodward Governors{1265}
1991/05/20
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings{1253}
1991/09/30
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings{1253}
1992/01/20
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks{1201,1253}
1992/08/31
Major Engine Component Changes{1201,1202,1205,1218,1219,1230,1253,1288,1331}
1992/09/07
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly{1251,1253,1281,1292}
1992/09/21
New Bonnet Used In Fuel Injection Pump Group {1251}
1993/06/14
Camshaft Lobe Surface Finish Improved; Camshaft Drive Gear Installation Procedure {1209,1210,1212}
1993/09/13
Fuel Injection Pump Improvements{1251}
1994/02/07
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
3406C Pump And Governor Changes Provide Improved Oil And Fuel Leak Resistence{7555}
1997/09/08
The Procedure for the Removal of the Electronic Unit Injector has Changed. {1290}
2004/05/10
Troubleshooting Engines with New Scroll Fuel Systems (NSFS) {1254}
2006/01/02
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Caterpillar Parts SIS Catalog 3406B :

PUMP GP-FUEL INJECTION
4P-1415 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1415 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1415 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7C-3222 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7C-3222 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1384 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1384 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1384 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1415 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1415 PUMP GP-FUEL INJECTION
FASTENER GP-FUEL INJ PUMP
9Y-4913 FASTENER GP-FUEL INJ PUMP
FASTENER GP-GOVERNOR
7C-5890 FASTENER GP-GOVERNOR
GOVERNOR GP
2W-7325 GOVERNOR GP
GOVERNOR GP
2W-7325 GOVERNOR GP
GOVERNOR GP
2W-7325 GOVERNOR GP
GOVERNOR GP
2W-7325 GOVERNOR GP

Truck sale:

1990 CAT 3406B
USD $25,000 
1990 CAT 3406B

Power Generation Enterprises Inc.
North Hollywood, California
1991 CAT 3406B
USD $22,000 
1991 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
1989 CAT 3406B
USD $35,000 
1989 CAT 3406B

Worldwide Power Products LLC
Houston, Texas
1988 CAT 3406B
USD $29,000 
1988 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
CATERPILLAR 3406B 1988
$29,000 USD 
CATERPILLAR 3406B 1988
- MARINE - PROPULSION
RANSOME ENGINE POWER
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.