AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2P7308 SEAL GP-CRANKSHAFT S/N 64Z1725-UP 3306 ENGINE - MACHINE


BASIC ENGINE
CRANKSHAFT GP
PISTON & ROD GP
CYLINDER HEAD GP

ENGINE - MACHINE 3306 ENGINE - MACHINE 64Z
 3306 INDUSTRIAL ENGINE 64Z00001-05380 SEBP1435 3306 64Z   (2018)

BASIC ENGINE

CRANKSHAFT GP
CRANKSHAFT AS
4N-7693 CRANKSHAFT AS
CRANKSHAFT GP
6N-8079 CRANKSHAFT GP
CRANKSHAFT BEARING REPLACEMENTS
SEAL GP-CRANKSHAFT
2P-7308 SEAL GP-CRANKSHAFT
SEAL GP-CRANKSHAFT
2P-6224 SEAL GP-CRANKSHAFT
ADAPTER GP-SEAL
3N-2886 ADAPTER GP-SEAL
ADAPTER GP-SEAL
3N-2886 ADAPTER GP-SEAL
 

#SEBP14350080
 

2P-7308: SEAL GP-CRANKSHAFT

2P7308 SEAL GP-CRANKSHAFT
S/N 64Z1725-UP
c480563 SEBP1435
2P7308 SEAL GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-0452 [1] SEAL GP-CRANKSHAFT  
2. 5S-6296 [1] SEAL-LIP TYPE  
 

#SEBP14350081
 

2P-6224: SEAL GP-CRANKSHAFT

2P6224 SEAL GP-CRANKSHAFT
c490391 SEBP1435
2P6224 SEAL GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-0452 [1] SEAL GP-CRANKSHAFT (COUNTERCLOCKWISE ROTATION)(REAR)  
2. 362-8853 [1] SEAL GP-CRANKSHAFT (CLOCKWISE ROTATION) (FRONT)  
   
    -OR-
   
  9Y-9895 [1] SEAL GP-CRANKSHAFT (CLOCKWISE ROTATION) (FRONT)  
 

#SEBP14350082
 

2W-1177: PISTON & ROD GP

2W1177 ROD & PISTON GP-15:1 RATIO*R
S/N 64Z1005-UP
c674902 SEBP1435
2W1177 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9805 [1] PIN-PISTON  
2. 1S-9543 [2] RETAINER-PIN  
3. 8N-1721 R [1] ROD AS-CONNECTING  
  8N-1849 [1] BEARING-CONNECTING ROD  
4. 1P-9956 [2] BOLT-CONNECTING ROD  
  5S-6348 [2] NUT  
5. 4W-5739 C [1] BEARING-CONNECTING ROD  
  8N-8221 A [1] BEARING-CONNECTING ROD (.254MM (.01IN) UNDER SIZE)  
  8N-8222 A [1] BEARING-CONNECTING ROD (.508MM (.02IN) UNDER SIZE)  
  8N-8223 A [1] BEARING-CONNECTING ROD (.762MM (.03IN) UNDER SIZE)  
6. 2W-1711 [1] PISTON GP  
7. 7E-6047 [1] RING-PISTON (OIL)  
8. 2W-1708 [1] RING (INTERMEDIATE)  
9. 2W-1707 [1] RING-PISTON (TOP)  
10. 129-0338 [1] BODY AS-PISTON  
    THE FOLLOWING REPAIR KIT IS AVAILABLE:
  2W-1709 [1] KIT-PISTON RING (INCLS A COMPLETE SET OF RINGS FOR ONE PISTON)  
  A   NOT PART OF THIS GROUP
  R   REMFG PART MAY BE AVAILABLE
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14350083
 

8N-2531: PISTON & ROD GP

8N2531 ROD & PISTON GP-6 REQUIRED
c233029 SEBP1435
8N2531 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9805 [1] PIN-PISTON  
2. 1S-9543 [2] RETAINER-PIN  
3. 8N-1721 R [1] ROD AS-CONNECTING  
  8N-1849 [1] BEARING-CONNECTING ROD  
4. 1P-9956 [2] BOLT-CONNECTING ROD  
  5S-6348 [2] NUT-SPECIAL  
5. 8N-8219 C [1] BEARING-CONNECTING ROD  
  2S-0502 [1] BEARING-.254MM US  
  2S-0503 [1] BEARING-.508MM US  
  7M-7826 [1] BEARING-.762MM US  
6. 8N-2533 [1] PISTON GP  
7. 9L-6934 [1] RING-PISTON (OIL)  
8. 9L-6933 [1] RING-PISTON INTERMEDIATE  
9. 9L-6932 [1] RING-PISTON TOP  
  9L-6935 [1] RING GP-PISTON  
    (CONSISTS OF COMPLETE
    SET OF RINGS FOR ONE
    PISTON)
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP14350084
 

1W-6588: PISTON & ROD GP

1W6588 CONNECTING ROD AND PISTON GROUP-16:1 RATIO
SERIAL NO. 64Z1874-UP
c638721 SEBP1435
1W6588 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9805 [1] PIN-PISTON  
2. 1S-9543 [2] RETAINER-PIN  
3. 8N-1721 R [1] ROD AS-CONNECTING  
  8N-1849 [1] BEARING-CONNECTING ROD  
4. 1P-9956 [2] BOLT-CONNECTING ROD  
  5S-6348 [2] NUT  
5. 4W-5739 C [1] BEARING-CONNECTING ROD (STD)  
  8N-8221 AC [1] BEARING-CONNECTING ROD ((.25MM)UNDERSIZE)  
  8N-8222 AC [1] BEARING-CONNECTING ROD ((.51MM)UNDERSIZE)  
  8N-8223 AC [1] BEARING-CONNECTING ROD ((.76MM)UNDERSIZE)  
6. 4P-8132 [1] BODY AS-PISTON  
7. 7E-6047 [1] RING-PISTON (OIL)  
8. 5S-6750 [1] RING-PISTON (INTERMEDIATE)  
9. 9S-3029 [1] RING-PISTON (TOP)  
10. 2W-6091 AC [1] RING GP-PISTON  
11. 9S-3029 [1] RING-PISTON  
12. 5S-6750 [1] RING-PISTON  
13. 7E-6047 [1] RING-PISTON (OIL)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP14350085
 

7N-9536: FASTENER GP-CYLINDER HEAD

7N9536 CYLINDER HEAD FASTENER GROUP
c226521 SEBP1435
7N9536 FASTENER GP-CYLINDER HEAD Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5B-9603 [7] BOLT  
2. 1B-7709 C [5] BOLT (LOCATION X)  
3. 1D-4595 B [20] BOLT  
4. 2S-0736 C [25] WASHER-HARD  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14350086
 

8N-0246: CYLINDER HEAD GP

8N0246 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER 8N6796-PAGE 60.01
S/N 64Z1-4810
c320246 SEBP1435
8N0246 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-7144 [12] SPRING-VALVE  
2. 1W-5300 C [12] ROTOCOIL AS  
    (EACH INCLUDES)
  6N-7174 [1] SHIELD-OIL  
3. 2A-4429 [24] LOCK-RETAINER  
4. 8N-6796 R [1] CYLINDER HEAD GP  
5. 0S-1594 [4] BOLT  
6. 5M-2894 [4] WASHER  
7. 1P-6367 [1] COVER  
8. 5S-6735 [1] GASKET  
9. 3B-0623 [6] PLUG-CUP  
10. 3S-8313 [7] PLUG-CUP  
11. 1S-3062 [18] DIRECTOR-WATER  
12. 2B-0858 [3] PLUG-PIPE  
13. 7N-4448 [6] INSERT (INTAKE)  
14. 2W-4837 C [6] INSERT (EXHAUST)  
15. 2P-1262 [12] GUIDE-VALVE  
16. 3P-1896 [12] PLUG-CUP  
17. 7H-3171 [1] PLUG-PIPE  
18. 3S-5496 [1] SEAL-O-RING  
19. 7N-7999 [1] GASKET-CYLINDER HEAD  
20. 2W-2620 C [6] VALVE-INLET  
21. 6N-9916 [6] VALVE-EXHAUST  
22. 4W-8087 C [18] SEAL-WATER  
23. 7N-8018 [6] SEAL-WATER  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP14350087
 

8N-0246: CYLINDER HEAD GP

8N0246 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER 8N6796-PAGE 60.01
S/N 64Z4811-UP
c684725 SEBP1435
8N0246 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-7144 [12] SPRING-VALVE  
2. 1W-5300 [12] ROTOCOIL AS (EACH INCLUDES)  
  103-2454 [1] SPRING-VALVE  
  6N-7174 [1] SHIELD-OIL  
3. 2A-4429 [24] LOCK-RETAINER  
4. 8N-6796 R [1] CYLINDER HEAD GP  
5. 0S-1594 [4] BOLT  
6. 5M-2894 [4] WASHER  
7. 1P-6367 [1] COVER  
8. 5S-6735 [1] GASKET  
9. 3B-0623 [6] PLUG-CUP  
10. 3S-8313 [7] PLUG-CUP  
11. 8N-4485 C [1] VALVE AS  
12. 8T-6762 [3] PLUG-PIPE  
13. 107-0268 [6] INSERT-VALVE SEAT (INTAKE)  
14. 107-0265 [6] INSERT-VALVE SEAT (EXHAUST)  
15. 116-7553 [12] GUIDE-VALVE  
16. 3P-1896 [13] PLUG-CUP  
17. 8T-6763 [1] PLUG  
18. 3S-5496 [1] SEAL-O-RING  
19. 111-8015 [1] GASKET AS-CYLINDER HEAD  
20. 100-7860 [6] VALVE-INLET  
21. 100-7861 [6] VALVE (EXHAUST)  
22. 9Y-1798 [18] SEAL-WATER  
23. 7N-8018 [6] SEAL-WATER  
24. ZJ [4] STUD-HEADBOLT  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Z   NOT SERVICED SEPARATELY
  J   PART OF JAKE BRAKE GP
 

#SEBP14350088
 

7N-8876: CYLINDER HEAD GP

7N8876 CYLINDER HEAD GP*R
FIELD REPLACEMENT ORDER 8N6796-PAGE 60.01
S/N 64Z608-4810
c322590 SEBP1435
7N8876 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-7144 [12] SPRING-VALVE  
2. 1W-5300 C [12] ROTOCOIL AS  
    (EACH INCLUDES)
  8N-7782 [1] ROTOCOIL AS  
  6N-7174 [1] SHIELD-OIL  
3. 2A-4429 [24] LOCK-RETAINER  
4. 8N-6796 R [1] CYLINDER HEAD GP  
5. 0S-1594 [4] BOLT  
6. 5M-2894 [4] WASHER  
7. 1P-6367 [1] COVER  
8. 5S-6735 [1] GASKET  
9. 3B-0623 [6] PLUG-CUP  
10. 3S-8313 [7] PLUG-CUP  
11. 1S-3062 [18] DIRECTOR-WATER  
12. 2B-0858 [3] PLUG-PIPE  
13. 7N-4448 [6] INSERT (INTAKE)  
14. 8N-0435 [6] INSERT (EXHAUST)  
15. 2P-1262 [12] GUIDE-VALVE  
16. 3P-1896 [12] PLUG-CUP  
17. 7H-3171 [1] PLUG-PIPE  
18. 3S-5496 [1] SEAL-O-RING  
19. 7N-7999 [1] GASKET-CYLINDER HEAD  
20. 6N-9915 [6] VALVE-INLET  
21. 6N-9916 [6] VALVE-EXHAUST  
22. 4W-8087 C [18] SEAL-WATER  
23. 7N-8018 [6] SEAL-WATER  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP14350089
 

7N-8876: CYLINDER HEAD GP

7N8876 CYLINDER HEAD GP*R
FIELD REPLACEMENT ORDER 8N6796-PAGE 60.01
S/N 64Z4811-UP
c487560 SEBP1435
7N8876 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-7144 [12] SPRING-VALVE  
2. 1W-5300 [12] ROTOCOIL AS  
    (EACH INCLUDES)
  8N-7782 [1] ROTOCOIL AS  
  6N-7174 [1] SHIELD-OIL  
3. 2A-4429 [24] LOCK-RETAINER  
4. 8N-6796 R [1] CYLINDER HEAD GP  
5. 0S-1594 [4] BOLT  
6. 5M-2894 [4] WASHER  
7. 1P-6367 [1] COVER  
8. 5S-6735 [1] GASKET  
9. 2P-1262 [12] GUIDE-VALVE  
10. 3S-8313 [7] PLUG-CUP  
11. 3P-1896 [12] PLUG-CUP  
12. 2B-0858 [3] PLUG-PIPE  
13. 8N-4485 C [1] VALVE AS  
14. 3B-0623 [6] PLUG-CUP  
15. 7N-4448 [6] INSERT (INTAKE)  
16. 2W-4837 C [6] INSERT (EXHAUST)  
17. 7H-3171 [1] PLUG-PIPE  
18. 3S-5496 [1] SEAL-O-RING  
19. 7E-6167 [1] GASKET-CYLINDER HEAD  
20. 6N-9915 [6] VALVE-INLET  
21. 6N-9916 [6] VALVE-EXHAUST  
22. 9Y-1798 [18] SEAL-WATER  
23. 7N-8018 [6] SEAL-WATER  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

Information:

Engine News
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines
1979/04/04
Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed
1979/06/06
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
Use 6V6035 Hardness Tester On Crankshafts
1982/02/24
New Crankshaft Assemblies
1982/11/10
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Crankshaft Failures
1983/11/30
Remanufactured Undersize Crankshafts Are Available
1984/04/11
New Rear Crankshaft Seal Group Used
1984/07/11
Why Choose Caterpillar Remanufactured Crankshafts? Because We Offer More ...
1985/09/01
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts
1991/01/01
New Front Crankshaft Seal Used{1160,1202}
1991/03/01
A New Type of Main Bearing is Available {1203}
2006/01/02
Procedure for Crankshafts that will not Rotate after Installation during a Rebuild {1202}
2008/09/15
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Service Replacement Thrust Plates{1203}
Installation Of Service Replacement Thrust Plates{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installation Of Service Replacement Crankshaft For A 3304 Or 3306 Engine{1202}
Installation Of Service Replacement Crankshaft For A 3304 Or 3306 Engine{1202}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In the Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In the Seal Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Specifications
Rear Crankshaft Gear And Accessory Drive Group
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Hub And Damper
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Pulley
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Disassembly and Assembly
Crankshaft Main Bearings
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Front Seal & Wear Sleeve
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Pulley (3304)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Vibration Damper & Pulley (3306)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Rear Seal & Wear Sleeve
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Crankshaft Main Bearings
3304B & 3306B MARINE ENGINES
Crankshaft Front Seal And Wear Sleeve
3304B & 3306B MARINE ENGINES
Crankshaft Pulley (3304)
3304B & 3306B MARINE ENGINES
Crankshaft
3304B & 3306B MARINE ENGINES
Crankshaft Rear Seal And Wear Sleeve
3304B & 3306B MARINE ENGINES
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Connecting Rod And Main Bearings Have Thicker Layer Of Surface Material{1230,1203,1219}
1982/10/04
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
New Connecting Rod And Main Bearings Used{1230,1219,1203}
1984/03/26
New Rear Crankshaft Seal Group Used {1161}
1984/06/25
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Crankshaft Seal Usage On 3300 Family of Engines{1160,1161}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
Tools To Install Crankshaft Seal And Wear Sleeve{1160,1161,0622}
1977/07/11
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Double Lip Seal With Hydrodynamic Grooves Used At Rear Of Crankshaft {1161,1200}
1987/09/28
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines{1161}
1979/03/26
Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed{7555,7558,1161}
1979/06/04
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
New Front Crankshaft Seal Used{1160,1202}
1991/02/18
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
A New Type of Main Bearing is Available {1203}
2005/12/26
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16

Caterpillar Parts SIS Catalog 3306 :

CRANKSHAFT BEARING REPLACEMENTS
CRANKSHAFT GP
6N-8079 CRANKSHAFT GP
CRANKSHAFT AS
4N-7693 CRANKSHAFT AS
CAMSHAFT GP
1N-4406 CAMSHAFT GP
COVER GP-CYLINDER BLOCK
7N-1339 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
8N-3163 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
7N-1292 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
7N-1342 COVER GP-CYLINDER BLOCK
SEAL GP-CRANKSHAFT
2P-6224 SEAL GP-CRANKSHAFT
PISTON & ROD GP
2W-1177 PISTON & ROD GP
PISTON & ROD GP
8N-2531 PISTON & ROD GP
PISTON & ROD GP
1W-6588 PISTON & ROD GP
FASTENER GP-CYLINDER HEAD
7N-9536 FASTENER GP-CYLINDER HEAD
CYLINDER HEAD GP
8N-0246 CYLINDER HEAD GP
CYLINDER HEAD GP
8N-0246 CYLINDER HEAD GP
CYLINDER HEAD GP
7N-8876 CYLINDER HEAD GP

Truck sale:

 
9,775 
Caterpillar 3306T, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
FINANZAUTO S.A.
Caterpillar 3306T, Stationary Generator Sets, Construction
35,500 
Caterpillar 3306T, Stationary Generator Sets, Construction
- Stationary Generator Sets
RING POWER CORP.
Caterpillar 3306, Stationary Generator Sets, Construction
8,185 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3306, Stationary Generator Sets, Construction
41,500 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
35,000 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.