AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2W2925 GOVERNOR & FUEL INJECTION PUMP GROUP SERIAL NO. 64Z1005-UP 2W2410-268 AND 8N2525-PAGE 278 PART OF 2W8986 GOVERNOR & FUEL INJECTION PUMP 3306


FUEL SYSTEM
GOVERNOR GP
PUMP GP-FUEL INJECTION
GOVERNOR GP

ENGINE - MACHINE 3306 ENGINE - MACHINE 64Z
 3306 INDUSTRIAL ENGINE 64Z00001-05380 SEBP1435 3306 64Z   (2018)

FUEL SYSTEM

GOVERNOR GP
PUMP GP-GOV & FUEL INJ
2W-2411 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-0257 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-2925 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7W-7899 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7W-7899 PUMP GP-GOV & FUEL INJ
GOVERNOR GP
8N-2508 GOVERNOR GP
 

#SEBP14350580
 

2W-2925: PUMP GP-GOV & FUEL INJ

2W2925 GOVERNOR & FUEL INJECTION PUMP GROUP
SERIAL NO. 64Z1005-UP
2W2410-268 AND 8N2525-PAGE 278
PART OF 2W8986 GOVERNOR & FUEL INJECTION PUMP
c305104 SEBP1435
2W2925 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-2410 Y [1] GOVERNOR GP  
2. 7N-8768 [1] GASKET  
3. 8B-2377 [4] BOLT  
4. 8N-5784 [1] DEFLECTOR-PULSE  
5. 0S-1614 [3] BOLT  
6. 8N-2525 Y [1] GOV & FUEL INJ PUMP GP  
7. 7N-9907 [1] COVER  
8. 7N-9554 [1] GASKET  
9. 4F-7957 [6] BOLT  
10. 1B-2713 [2] BOLT  
11. 4B-4276 [2] WASHER  
12. 2S-7383 [1] BOLT  
13. 6B-4198 [2] BOLT  
14. 0S-1616 [1] BOLT  
15. 8F-8178 [2] BOLT  
16. 4N-1761 [4] BOLT  
17. 9S-4191 [1] PLUG-O-RING  
18. 3J-1907 [1] SEAL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP14350581
 

7W-7899: PUMP GP-GOV & FUEL INJ

7W7899 GOVERNOR & FUEL INJECTION PUMP GP
TYPE 1
1W3598-PAGE 285.02, 2W2410-PAGE 268, 7W5932-PAGE 282.02 &
7C8993-PAGE 261
c453645 SEBP1435
7W7899 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [1] PLUG-O-RING  
  4J-7533 [1] SEAL-O-RING  
2. 033-5879 [1] SEAL-O-RING  
3. 8J-8343 [1] SEAL-O-RING  
4. 7N-5334 [1] SETSCREW-SOCKET  
5. 8N-3799 [1] COVER-FUEL RATIO  
6. 4W-5735 [1] LEVER AS-PIVOT  
7. 6V-6835 [1] SETSCREW-SOCKET  
8. 8L-5832 C [1] NUT-HEX  
9. 4W-5734 [1] LEVER AS  
  6V-6835 [1] SETSCREW-SOCKET  
  8L-5832 C [1] NUT-HEX  
10. 2W-2410 Y [1] GOVERNOR GP  
11. 7N-8768 [1] GASKET  
12. 3J-1907 [1] SEAL  
13. 7W-5932 Y [1] GOV & FUEL INJ PUMP GP  
14. 0S-1616 C [2] BOLT  
15. 7C-8993 CY [1] FASTENER GP  
16. 7N-2176 [1] PIN-DETENT  
17. 7N-1052 [1] DOWEL  
18. 8N-3093 [1] SPRING-DETENT  
19. 1W-3598 Y [1] TORQUE CONTROL GP  
20. 8N-5784 [1] DEFLECTOR-PULSE  
21. 8L-9790 [1] SPRING-GOVERNOR  
22. 8N-5403 [1] SHAFT AS-THROTTLE  
23. 2W-5448 [1] COVER  
  2W-5447 [1] GASKET  
24. 7N-9907 [1] COVER  
  7N-9554 [1] GASKET  
25. 8M-8515 [1] SEAL-O-RING  
26. 5P-6620 [1] SEAL-O-RING  
27. 8L-5832 C [1] NUT-HEX  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14350582
 

7W-7899: PUMP GP-GOV & FUEL INJ

7W7899 GOVERNOR & FUEL INJECTION PUMP GP
TYPE 2
2W2410-PAGE 268, 7W5932-PAGE 282.02, 7C8993-PAGE 261 &
8N7276-PAGE 286
c481882 SEBP1435
7W7899 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [1] PLUG-O-RING  
  4J-7533 [1] SEAL-O-RING  
2. 033-5879 [1] SEAL-O-RING  
3. 8J-8343 [1] SEAL-O-RING  
4. 5H-6552 C [1] SETSCREW-SOCKET  
5. 8N-3799 [1] COVER-FUEL RATIO  
6. 4W-5735 [1] LEVER AS-PIVOT  
7. 6V-6835 [1] SETSCREW-SOCKET  
8. 8L-5832 [1] NUT-HEX  
9. 4W-5734 [1] LEVER AS  
  6V-6835 [1] SETSCREW-SOCKET  
  8L-5832 [1] NUT-HEX  
10. 2W-2410 Y [1] GOVERNOR GP  
11. 7N-8768 [1] GASKET  
12. 3J-1907 [1] SEAL  
13. 7W-5932 Y [1] GOV & FUEL INJ PUMP GP  
14. 0S-1616 [2] BOLT  
15. 7C-8993 Y [1] FASTENER GP  
16. 7N-2176 [1] PIN-DETENT  
17. 7N-1052 [1] DOWEL  
18. 8N-3093 [1] SPRING-DETENT  
19. 8N-7276 CY [1] TORQUE CONTROL GP  
20. 8N-5784 [1] DEFLECTOR-PULSE  
21. 8L-9790 [1] SPRING-GOVERNOR  
22. 8N-5403 [1] SHAFT AS-THROTTLE  
   
23. 2W-5448 [1] COVER  
  2W-5447 [1] GASKET  
24. 7N-9907 [1] COVER  
  7N-9554 [1] GASKET  
25. 8M-8515 [1] SEAL-O-RING  
26. 5P-6620 [1] SEAL-O-RING  
27. 8L-5832 [1] NUT-HEX  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14350583
 

7C-8993: FASTENER GP-FUEL INJ PUMP

7C8993 FASTENER GP
PART OF 2W6275, 1W6905, 2W0057, 2W0058, 2W1078, 2W8986,
7W6576, 7C0293 & 7W7899 GOVERNOR & FUEL INJECTION PUMPS
c459043 SEBP1435
7C8993 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8B-2377 [4] BOLT 50.8MM(2.0IN)LG  
2. 4N-1761 [4] BOLT 165.1MM(6.5IN)LG  
3. 9S-4191 [1] PLUG-O-RING  
4. 0S-1614 [3] BOLT 12.7MM(.5IN)LG  
5. 4F-7957 C [8] BOLT 22.22MM(.8748IN)LG  
6. 2S-7383 [1] BOLT  
7. 8F-8178 [2] BOLT 82.55MM(3.25IN)LG  
8. 6B-4198 [2] BOLT 106.36MM(4.19IN)LG  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14350584
 

8N-2508: GOVERNOR GP

8N2508 GOVERNOR GROUP-PART 1 OF 3-TYPE 1
SERIAL NO. 64Z1 TO 64Z1335 INCLUSIVE
PART OF 8N2524 GOVERNOR AND FUEL INJECTION PUMP GROUP SHOWN ON PAGE 257
c480283 SEBP1435
8N2508 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-8002 [1] PLUG-O-RING  
2. 8N-3259 [1] COVER-HIGH IDLE  
  8N-3263 [1] GASKET  
3. 7N-2594 [1] SETSCREW-SLOTTED  
  7N-8775 [1] NUT-HIGH IDLE  
4. 5B-7040 [2] BOLT  
5. 3J-7354 [1] SEAL-O-RING  
6. 4N-5485 [1] BODY-VALVE  
  5F-9144 [1] SEAL-O-RING  
7. 4N-5484 [1] VALVE-NEEDLE  
  6H-9691 [1] SEAL-O-RING  
8. 4F-7957 [6] BOLT  
9. 7N-8780 [1] COVER AS-CONTROL  
10. 5P-3272 [1] SEAL-LIP TYPE  
11. 7N-8779 [1] GASKET-COVER  
12. 3P-0009 [1] INSULATOR-STUD  
13. 1P-2497 [2] BOLT-HEAD  
14. 8N-3258 [1] COVER-LOAD STOP  
  8N-3264 [1] GASKET  
 

#SEBP14350585
 

8N-2508: GOVERNOR GP

8N2508 GOVERNOR GROUP-PART 2 OF 3-TYPE 1
SERIAL NO. 64Z1 TO 64Z1335 INCLUSIVE
PART OF 8N2524 GOVERNOR AND FUEL INJECTION PUMP GROUP SHOWN ON PAGE 257
c480284 SEBP1435
8N2508 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-8785 [1] SHAFT-PIVOT  
2. 1N-3800 [1] SLEEVE-RACK CONTROL  
3. 3K-8460 [1] PLUG  
  1J-9671 [1] SEAL-O-RING  
4. 1N-3801 [1] SPRING-LINK  
5. 2M-7819 [2] RING-RETAINING  
6. 1N-3802 [1] SEAT-SPRING  
7. 8N-2507 [1] PISTON AS-SERVO  
  8N-2505 [1] VALVE-GOVERNOR SERVO  
  7N-7271 [1] LEVER-CONTROL  
  3G-3835 [1] PIN  
8. 7N-7273 [1] PISTON  
9. 8N-3089 [1] SLEEVE  
10. 5P-9757 [1] SEAL-O-RING  
11. 031-0216 [3] BOLT  
12. 4N-2953 [1] RING-LOCK  
13. 4N-2927 [2] RACE-BEARING THRUST  
14. 7M-7219 [1] BEARING-THRUST  
15. 8N-2504 [1] RISER-GOVERNOR  
16. 7N-7267 [1] SPRING  
17. 8N-2495 [1] HOUSING AS-GOVERNOR  
  8S-6814 [4] PIN 12.7MM(.5IN)LG  
  4F-6024 [2] PIN 8MM(.315IN)LG  
   
   
   
18. 8N-2503 [1] DASHPOT AS-GOVERNOR  
  4N-6407 [1] SPOOL-DASHPOT  
  4N-6406 [1] RING-SPACER  
19. 4N-6404 [1] RING-RETAINING  
20. 8N-2496 [1] GASKET-GOVERNOR HOUSING  
21. 2N-0828 [2] WASHER  
22. 2P-9556 [1] WASHER  
23. 6N-3504 [1] SEAT-GOVERNOR SPRING  
24. 7N-8821 [2] RING-RETAINING  
25. 7N-7270 [2] SLEEVE-SPRING  
26. 3K-5733 [1] SPRING  
27. 8N-2501 [1] HOUSING AS-GOVERNOR  
  1P-2298 [1] VALVE AS  
28. 8N-2499 [1] GUIDE-SPRING  
29. 3D-8317 [1] RING-RETAINING  
30. 4N-0260 [1] SEAL-LIP TYPE  
31. 4N-0432 [1] BALL BEARING  
32. 1P-4001 C [1] FITTING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14350586
 

8N-2508: GOVERNOR GP

8N2508 GOVERNOR GROUP-PART 3 OF 3-TYPE 1
S/N 64Z1-64Z1335
PART OF 8N2524 GOVERNOR AND FUEL INJECTION PUMP GROUP SHOWN ON PAGE 257
c480285 SEBP1435
8N2508 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6D-3897 [1] BOLT  
2. 6L-5897 [2] BOLT  
3. 8N-2492 [1] BLOCK AS-STOP  
  8N-3303 [1] DOWEL  
4. 7N-8821 [1] RING-RETAINING  
5. 8N-2488 [1] BOLT-LOAD STOP  
6. 8N-3256 [1] COLLAR-LOAD STOP  
7. 4B-2049 [1] NUT  
8. 5H-6552 C [1] SETSCREW-SOCKET  
9. 6N-1069 [1] SPRING  
10. 8N-3087 [1] STOP-IDLE DETENT  
11. 7N-2172 [2] PIN  
12. 7N-2171 [4] RING-RETAINING  
13. 7N-2594 [1] SETSCREW-SLOTTED  
  5B-3180 [1] NUT  
  5N-4185 [1] WASHER-SEALING  
  9M-1974 C [1] WASHER  
14. 8N-3167 [2] PLATE-THROTTLE  
15. 8N-3168 [1] LEVER-THROTTLE  
16. 7N-8784 [1] LEVER-SEAT  
17. 1W-4243 C [1] SPRING-BUMPER  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14350587
 

8N-2508: GOVERNOR GP

8N2508 GOVERNOR GROUP-PART 1 OF 3-TYPE 2
SERIAL NO. 64Z1 TO 64Z1335 INCLUSIVE
PART OF 8N2524 GOVERNOR AND FUEL INJECTION PUMP GROUP SHOWN ON PAGE 257
c551040 SEBP1435
8N2508 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-6523 C [1] PLUG-O-RING  
2. 8N-3259 [1] COVER-HIGH IDLE  
  8N-3263 [1] GASKET  
3. 7N-2594 [1] SETSCREW-SLOTTED  
  7N-8775 [1] NUT-HIGH IDLE  
4. 5B-7040 [2] BOLT  
5. 3J-7354 [1] SEAL-O-RING  
6. 4N-5485 [1] BODY-VALVE  
  5F-9144 [1] SEAL-O-RING  
7. 4N-5484 [1] VALVE-NEEDLE  
  6H-9691 [1] SEAL-O-RING  
8. 4F-7957 [6] BOLT  
9. 7N-8780 [1] COVER AS-CONTROL  
10. 8T-2604 [1] SEAL-LIP TYPE  
11. 7N-8779 [1] GASKET-COVER  
12. 3P-0009 [1] INSULATOR-STUD  
13. 1P-2497 [2] BOLT-HEAD  
14. 8N-3258 [1] COVER-LOAD STOP  
  8N-3264 [1] GASKET  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14350588
 

8N-2508: GOVERNOR GP

8N2508 GOVERNOR GROUP-PART 2 OF 3-TYPE 2
SERIAL NO. 64Z1 TO 64Z1335 INCLUSIVE
PART OF 8N2524 GOVERNOR AND FUEL INJECTION PUMP GROUP SHOWN ON PAGE 257
c305090 SEBP1435
8N2508 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-8785 [1] SHAFT-PIVOT  
2. 1N-3800 [1] SLEEVE-RACK CONTROL  
3. 1P-4001 [1] FITTING  
4. 1N-3801 [1] SPRING-LINK  
5. 2M-7819 [2] RING-RETAINING  
6. 1N-3802 [1] SEAT-SPRING  
7. 8N-2507 [1] PISTON AS-SERVO  
  8N-2505 [1] VALVE-GOVERNOR SERVO  
  7N-7271 [1] LEVER-CONTROL  
  3G-3835 [1] PIN  
8. 7N-7273 [1] PISTON  
9. 8N-3089 [1] SLEEVE  
10. 5P-9757 [1] SEAL-O-RING  
11. 031-0216 [3] BOLT  
12. 4N-2953 [1] RING-LOCK  
13. 4N-2927 [2] RACE-BEARING THRUST  
14. 7M-7219 [1] BEARING-THRUST  
15. 8N-2504 [1] RISER-GOVERNOR  
16. 7N-7267 [1] SPRING  
17. 8N-2495 [1] HOUSING AS-GOVERNOR  
  8S-6814 [4] PIN 12.7MM(.5IN)LG  
  4F-6024 [2] PIN 8MM(.315IN)LG  
18. 8N-2503 [1] DASHPOT AS-GOVERNOR  
  4N-6407 [1] SPOOL-DASHPOT  
  4N-6406 [1] RING-SPACER  
19. 4N-6404 [1] RING-RETAINING  
20. 8N-2496 [1] GASKET-GOVERNOR HOUSING  
21. 2N-0828 [2] WASHER  
22. 2P-9556 [1] WASHER  
23. 6N-3504 [1] SEAT-GOVERNOR SPRING  
24. 7N-8821 [2] RING-RETAINING  
25. 7N-7270 [2] SLEEVE-SPRING  
26. 3K-5733 [1] SPRING  
27. 8N-2501 [1] HOUSING AS-GOVERNOR  
  1P-2298 [1] VALVE AS  
28. 8N-2499 [1] GUIDE-SPRING  
29. 3D-8317 [1] RING-RETAINING  
30. 4N-0260 [1] SEAL-LIP TYPE  
31. 4N-0432 [1] BALL BEARING  
 

#SEBP14350589
 

8N-2508: GOVERNOR GP

8N2508 GOVERNOR GROUP-PART 3 OF 3-TYPE 2
SERIAL NO. 64Z1 TO 64Z1335 INCLUSIVE
PART OF 8N2524 GOVERNOR AND FUEL INJECTION PUMP GROUP SHOWN ON PAGE 257
c305091 SEBP1435
8N2508 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6D-3897 [1] BOLT  
2. 6L-5897 [2] BOLT  
3. 8N-2492 [1] BLOCK AS-STOP  
  8N-3303 [1] DOWEL  
4. 7N-8821 [1] RING-RETAINING  
5. 8N-2488 [1] BOLT-LOAD STOP  
6. 8N-3256 [1] COLLAR-LOAD STOP  
7. 4B-2049 [1] NUT  
8. 5H-6552 [1] SETSCREW-SOCKET  
9. 6N-1069 [1] SPRING  
10. 8N-3087 [1] STOP-IDLE DETENT  
11. 7N-2172 [2] PIN  
12. 7N-2171 [4] RING-RETAINING  
13. 7N-2594 [1] SETSCREW-SLOTTED  
  5B-3180 [1] NUT  
  5N-4185 [1] WASHER-SEALING  
  9M-1974 [1] WASHER  
14. 8N-3167 [2] PLATE-THROTTLE  
15. 8N-3168 [1] LEVER-THROTTLE  
16. 7N-8784 [1] LEVER-SEAT  
17. 1W-4243 [1] SPRING-BUMPER  
 

Information:

Engine News
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement
1981/04/22
Explanation Of Differences In Timing Advance Information
1981/08/26
New Broken Link Spring Used In Governor
1982/05/12
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
New Torque Specification For Fuel Injection Pump Bushing
1982/09/22
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier
1982/11/10
New Governor Drive Gears And Weight Assemblies
1983/09/14
Remanufactured Fuel Pump And Governor Groups
1983/10/26
Service Information For Woodward Governors
1983/10/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
Fill Oil Sump Before Installing Woodward Governor
1985/01/16
Fuel Transfer Pump Improved
1985/11/01
Bolt Removed From Governor And Fuel Injection Pump Group
1985/12/01
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
New Material Used For Disc In Valve Assemblies In Fuel Transfer Pump Groups
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Seals In Variable Timing Advance Available For Parts Service
1988/08/01
Governor Control Motor Polarity May Require A Change
1990/11/01
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/01
Governor Spring Guide Press Depth {1287,1284}
1996/01/17
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
Governor Control Cover Assembly Includes New Seal And Improved Cover{1264}
1997/07/01
Improved Governor Raise/Lower Motor Used In Governor Control Groups{1264}
1998/03/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Check Assembled Dimension for Rack Lever Travel{1264, 1250}
Check Assembled Dimension for Rack Lever Travel{1264, 1250}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Service Letter-NACD
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Fuel Injection Pump
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Governor
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Ratio Control
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Woodward PSG Governor
3304B & 3306B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Governor Control
3304B & 3306B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Service Letter-China
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Product Support Program For Governor Servo Pin Loss On Certain 3304, 3306, 3306B, 3406 And 3406B Engines
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Injection Pump Housing & Governor
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Governor
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing And Governor
3304B & 3306B MARINE ENGINES
Governor
3304B & 3306B MARINE ENGINES
Fuel Injection Pumps
3304B & 3306B MARINE ENGINES
Fuel Transfer Pump
3304B & 3306B MARINE ENGINES
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
New Broken Link Spring Used In Governor{1264}
1982/04/19
New Torque Specification For Fuel Injection Pump Bushing{1251,1253}
1982/08/09
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
New Fuel Ratio Control Group Has Improved Diaphragm{1278,1257,1251}
1983/08/15
New Governor Drive Gears And Weight Assemblies{1264}
1983/08/22
Service Information For Woodward Governors{0374,1264}
1983/09/26
Remanufactured Fuel Pump And Governor Groups{1251,1264}
1983/10/17
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Fuel Transfer Pump Improved{1256}
1985/10/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups{1265,1264,1250}
1986/06/02
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Check Assembled Dimension For Rack Lever Travel If Governor Housing Assembly Is Replaced {1264}
1988/12/19
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
Governor Control Motor Polarity May Require A Change{1265,1408,7556}
1990/10/29
New Engine Magnetic Speed Sensor Used{1907}
1990/12/10
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Governor Control Cover Assembly Includes New Seal And Improved Cover {1264}
1997/07/07
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22

Caterpillar Parts SIS Catalog 3306 :

PUMP GP-GOV & FUEL INJ
2W-0257 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-2411 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
8N-2524 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-0293 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-0293 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7W-6576 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7W-6576 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-8986 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7W-7899 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7W-7899 PUMP GP-GOV & FUEL INJ
FASTENER GP-FUEL INJ PUMP
7C-8993 FASTENER GP-FUEL INJ PUMP
GOVERNOR GP
8N-2508 GOVERNOR GP
GOVERNOR GP
8N-2508 GOVERNOR GP
GOVERNOR GP
8N-2508 GOVERNOR GP
GOVERNOR GP
8N-2508 GOVERNOR GP
GOVERNOR GP
8N-2508 GOVERNOR GP

Truck sale:

 
9,775 
Caterpillar 3306T, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
FINANZAUTO S.A.
Caterpillar 3306T, Stationary Generator Sets, Construction
35,500 
Caterpillar 3306T, Stationary Generator Sets, Construction
- Stationary Generator Sets
RING POWER CORP.
Caterpillar 3306, Stationary Generator Sets, Construction
8,185 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3306, Stationary Generator Sets, Construction
41,500 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
35,000 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.