AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6I2834 PUMP GP-FUEL INJECTION 1W6539-PAGE 282.01 PART OF 7W6576 GOVERNOR AND FUEL INJECTION PUMP 3306


FUEL SYSTEM
PUMP GP-FUEL INJECTION
GOVERNOR GP

ENGINE - MACHINE 3306 ENGINE - MACHINE 64Z
 3306 INDUSTRIAL ENGINE 64Z00001-05380 SEBP1435 3306 64Z   (2018)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
2W-0256 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
2W-0256 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
6I-2834 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
2W-6179 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
2W-6179 PUMP GP-FUEL INJECTION
HOUSING AS-FUEL PUMP
1W-3487 HOUSING AS-FUEL PUMP
 

#SEBP14350610
 

6I-2834: PUMP GP-FUEL INJECTION

6I2834 PUMP GP-FUEL INJECTION
1W6539-PAGE 282.01
PART OF 7W6576 GOVERNOR AND FUEL INJECTION PUMP
c593816 SEBP1435
6I2834 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [2] PLUG-O-RING  
  4J-7533 [2] SEAL-O-RING (6.07MM ID)  
2. 1W-3286 [1] RACK-REGULATOR  
3. 0S-1615 [4] BOLT (1/4-20X.75IN)  
4. 1W-6539 Y [6] PUMP GP-FUEL INJECTION  
5. 8N-5117 [6] BUSHING-TERMINAL  
6. 114-8718 [6] SEAL-O-RING  
7. 4W-6869 [6] SPACER-FUEL PUMP  
8. 7N-1047 [1] COVER-TIMING  
  7N-1046 [1] GASKET-COVER  
9. 7N-8421 [1] RING-RETAINING  
10. 8N-2487 [1] WASHER-THRUST  
11. 4P-9832 [6] LIFTER AS  
12. 4P-9840 [1] HOUSING AS  
13. 1S-1953 [1] BEARING-RACK  
14. 1W-3285 [1] BEARING-RACK  
15. 4P-8480 [6] PIN-PUMP GUIDE  
16. 6I-0979 [6] DOWEL  
17. 4P-9828 [1] BEARING-SLEEVE  
18. 7N-7970 [1] BEARING-SLEEVE  
19. 4P-9028 [1] CAMSHAFT AS  
  6I-2842 [1] CAMSHAFT-FUEL PUMP  
20. 7N-7264 [4] WEIGHT-GOVERNOR  
21. 9Y-7037 [4] BOLT  
22. 1S-5440 [4] DOWEL  
23. 4N-9019 [1] DOWEL  
24. 7E-3986 [1] CARRIER-WEIGHT  
25. 7L-3326 [1] BEARING-THRUST  
26. 8N-2510 [1] SHAFT-WEIGHT CARRIER  
27. 7N-7166 [2] RACE-THRUST BEARING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP14350611
 

2W-6179: PUMP GP-FUEL INJECTION

2W6179 PUMP GP-FUEL INJECTION
TYPE 1
S/N 64Z1874-UP
1W3487-PAGE 281 & 1W6539-PAGE 282
PART OF 2W0057 GOVERNOR & FUEL INJECTION PUMP
c514712 SEBP1435
2W6179 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [2] PLUG-O-RING  
  4J-7533 [2] SEAL-O-RING  
2. 1W-3286 [1] RACK-REGULATOR  
3. 1W-3487 Y [1] HOUSING AS-FUEL PUMP  
4. 1W-6539 Y [6] PUMP GP-FUEL INJECTION  
5. 8N-5117 [6] BUSHING  
6. 7E-4846 [6] SEAL-O-RING  
7. 4W-6869 [6] SPACER-FUEL PUMP  
8. 7N-1047 [1] COVER-TIMING  
  7N-1046 [1] GASKET-COVER  
9. 7N-8421 [1] RING-RETAINING  
10. 8N-2487 [1] WASHER-THRUST  
11. 8N-2489 [6] LIFTER AS  
12. 0S-1615 [4] BOLT  
13. 2W-6174 [1] CAMSHAFT AS  
14. 7N-7264 [4] WEIGHT-GOVERNOR  
15. 9Y-7037 [4] BOLT  
16. 1S-5440 [4] DOWEL  
17. 4N-9019 [1] DOWEL  
18. 8N-2511 [1] CARRIER-WEIGHT  
19. 7N-7166 [2] RACE-BEARING-THRUST  
  7L-3326 [1] BEARING-THRUST  
20. 7N-7265 [1] SHIELD-WT CARRIAGE  
21. 8N-2510 [1] SHAFT-WT CARRIER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP14350612
 

2W-6179: PUMP GP-FUEL INJECTION

2W6179 PUMP GP-FUEL INJECTION
TYPE 2
S/N 64Z1874-UP
1W6539-PAGE 282
PART OF 2W0057 GOVERNOR & FUEL INJECTION PUMP
c641129 SEBP1435
2W6179 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [2] PLUG-O-RING  
  4J-7533 [2] SEAL-O-RING  
2. 1W-3286 [1] RACK-REGULATOR  
3. 0S-1615 [4] BOLT  
4. 1W-6539 Y [6] PUMP GP-FUEL INJECTION  
5. 8N-5117 [6] BUSHING-TERMINAL  
6. 114-8718 [6] SEAL-O-RING  
7. 4W-6869 [6] SPACER-FUEL PUMP  
8. 7N-1047 [1] COVER-TIMING  
  7N-1046 [1] GASKET-COVER  
9. 7N-8421 [1] RING-RETAINING  
10. 8N-2487 [1] WASHER-THRUST  
11. 4P-9832 C [6] LIFTER AS  
12. 6I-2987 C [1] HOUSING AS-PUMP  
13. 1S-1953 C [1] BEARING-RACK  
14. 1W-3285 C [1] BEARING-RACK  
15. 4P-8480 C [6] PIN-PUMP GUIDE  
16. 6I-0979 C [6] DOWEL  
17. 6I-1631 C [1] BEARING-SLEEVE  
18. 7N-7970 C [1] BEARING-SLEEVE  
19. 2W-6174 [1] CAMSHAFT AS  
20. 7N-7264 [4] WEIGHT-GOVERNOR  
21. 9Y-7037 [4] BOLT  
22. 1S-5440 [4] DOWEL  
23. 4N-9019 [1] DOWEL  
24. 8N-2511 [1] CARRIER-WEIGHT  
25. 7L-3326 [1] BEARING-THRUST  
26. 8N-2510 [1] SHAFT-WEIGHT CARRIER  
27. 7N-7166 [2] RACE-THRUST BEARING  
28. 7N-7265 [1] SHIELD-WEIGHT CARRIER  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14350613
 

1W-3487: HOUSING AS-FUEL PUMP

1W3487 HOUSING AS-FUEL PUMP
PART OF 8N2525, 2W0256, 2W6179 & 7W5932 PUMPS-FUEL INJECTION
c517830 SEBP1435
1W3487 HOUSING AS-FUEL PUMP Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-2518 [1] BEARING-SLEEVE  
2. 1S-1953 [1] BEARING-RACK  
3. 7N-7969 [6] DOWEL  
4. 1W-3285 [1] BEARING-RACK  
5. 4P-8480 [6] PIN-PUMP GUIDE  
6. 7N-7970 [1] BEARING-SLEEVE  
 

#SEBP14350614
 

1W-6539: PUMP GP-FUEL INJECTION

1W6539 FUEL INJECTION PUMP GROUP - TYPE 1
PART OF 8N2525, 2W0256 & 2W6179 FUEL INJECTION PUMPS
c182072 SEBP1435
1W6539 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1M-3506 [1] RING-RETAINER  
2. 8N-1415 [1] SPRING-CHECK  
3. 8N-2516 [1] BONNET-VALVE  
4. 8N-1414 [1] CHECK AS-PUMP  
5. 1W-6541 [1] PLUNGER AS  
6. 7N-1067 [1] SPRING-LIFTER  
7. 7N-1415 [1] WASHER-RETAINER  
8. 8H-9299 [1] SCREW-PLUNGER GEAR  
 

#SEBP14350615
 

8N-2517: PUMP GP-FUEL INJECTION

8N2517 FUEL INJECTION PUMP GROUP
PART OF 8N2525 FUEL INJECTION PUMP
c226518 SEBP1435
8N2517 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1M-3506 [1] RING-RETAINER  
2. 8N-1415 [1] SPRING-CHECK  
3. 8N-2516 [1] BONNET-VALVE  
4. 8N-1414 [1] CHECK AS-PUMP  
5. 8N-9130 [1] PLUNGER AS  
6. 7N-1067 [1] SPRING-LIFTER  
7. 7N-1415 [1] WASHER-RETAINER  
 

#SEBP14350616
 

7W-5928: PUMP GP-FUEL INJECTION

7W5928 PUMP GP-FUEL INJECTION
PART OF 7W5932 PUMP-FUEL INJECTION
c351731 SEBP1435
7W5928 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-1927 [1] RING-RETAINER  
2. 8N-1415 [1] SPRING-CHECK  
3. 1W-9171 [1] BONNET-VALVE  
4. 1W-6987 [1] VALVE AS-CHECK  
5. 7W-5929 [1] PLUNGER & BARREL AS  
6. 7C-5278 C [1] BOLT-GEAR  
7. 7N-1066 C [1] WASHER-RETAINER  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14350617
 

1W-6539: PUMP GP-FUEL INJECTION

1W6539 PUMP GP-FUEL INJECTION
TYPE 2
PART OF 8N2525, 2W0256, 2W6179, &
6I2833 GOVERNOR & FUEL INJECTION PUMPS
c466949 SEBP1435
1W6539 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-1927 [1] RING-RETAINER  
2. 8N-1415 [1] SPRING-CHECK  
3. 1W-9171 [1] BONNET-VALVE  
4. 1W-6987 [1] VALVE AS-CHECK  
5. 1W-6541 [1] PLUNGER AS  
6. 7N-1067 [1] SPRING-LIFTER  
7. 7W-2808 [1] WASHER-RETAINER  
8. 8H-9299 [1] SCREW-PLUNGER GEAR  
    (11.1MM LG)
    -OR-
  7C-5278 C [1] BOLT-GEAR  
    (12.1MM LG)
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14350618
 

7W-5932: PUMP GP-GOV & FUEL INJ

7W5932 GOVERNOR & FUEL INJECTION PUMP GP
TYPE 1
7W5928-PAGE 282.01 & 1W3487-PAGE 281
PART OF 7C0293 & 7W7899 GOVERNOR & FUEL INJECTION PUMPS
c514689 SEBP1435
7W5932 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [2] PLUG-O-RING  
  4J-7533 [2] SEAL-O-RING  
2. 1W-3286 [1] RACK-REGULATOR  
3. 1W-3487 Y [1] HOUSING AS-FUEL PUMP  
4. 7W-5928 Y [6] PUMP GP-FUEL INJECTION  
5. 8N-5117 [6] BUSHING  
6. 3D-2992 [6] SEAL  
7. 4W-6869 [6] SPACER-FUEL PUMP  
8. 7N-1046 [1] GASKET-COVER  
9. 7N-8421 [1] RING-RETAINING  
10. 8N-2487 [1] WASHER-THRUST  
11. 8N-2489 [6] LIFTER AS  
12. 0S-1615 [4] BOLT  
13. 7N-1047 [1] COVER-TIMING  
14. 7W-5930 [1] CAMSHAFT AS  
  7W-7331 [1] CAMSHAFT-FUEL PUMP  
15. 8N-2510 [1] SHAFT-WT CARRIER  
  4N-9019 [1] DOWEL  
16. 7N-7265 [1] SHIELD-WT CARRIAGE  
  7N-7264 [4] WEIGHT-GOVERNOR  
  9Y-7037 [4] BOLT  
  1S-5440 [4] DOWEL  
17. 8N-2511 [1] CARRIER-WEIGHT  
18. 7N-7166 [2] RACE-BEARING-THRUST  
  7L-3326 [1] BEARING-THRUST  
  Y   SEPARATE ILLUSTRATION
 

#SEBP14350619
 

7W-5932: PUMP GP-GOV & FUEL INJ

7W5932 GOVERNOR & FUEL INJECTION PUMP GP
TYPE 2
7W5928-PAGE 282.01
PART OF 7C0293 & 7W7899 GOVERNOR & FUEL INJECTION PUMPS
c638044 SEBP1435
7W5932 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [2] PLUG-O-RING  
  4J-7533 [2] SEAL-O-RING  
2. 1W-3286 [1] RACK-REGULATOR  
3. 0S-1615 [4] BOLT  
4. 7W-5928 Y [6] PUMP GP-FUEL INJECTION  
5. 8N-5117 [6] BUSHING-TERMINAL  
6. 114-8718 [6] SEAL-O-RING  
7. 4W-6869 [6] SPACER-FUEL PUMP  
8. 7N-1047 [1] COVER-TIMING  
  7N-1046 [1] GASKET-COVER  
9. 7N-8421 [1] RING-RETAINING  
10. 8N-2487 [1] WASHER-THRUST  
11. 4P-9832 C [6] LIFTER AS  
12. 6I-2987 C [1] HOUSING AS-PUMP  
13. 1S-1953 [1] BEARING-RACK  
14. 1W-3285 [1] BEARING-RACK  
15. 4P-8480 [6] PIN-PUMP GUIDE  
16. 6I-0979 [6] DOWEL  
17. 6I-1631 [1] BEARING-SLEEVE  
18. 7N-7970 [1] BEARING-SLEEVE  
19. 7W-5930 [1] CAMSHAFT AS  
  7W-7331 [1] CAMSHAFT-FUEL PUMP  
20. 7N-7264 [4] WEIGHT-GOVERNOR  
21. 9Y-7037 [4] BOLT  
22. 1S-5440 [4] DOWEL  
23. 4N-9019 [1] DOWEL  
24. 8N-2511 [1] CARRIER-WEIGHT  
25. 7L-3326 [1] BEARING-THRUST  
26. 8N-2510 [1] SHAFT-WEIGHT CARRIER  
27. 7N-7166 [2] RACE-THRUST BEARING  
28. 7N-7265 [1] SHIELD-WEIGHT CARRIER  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
New Fuel Injection Nozzle Assembly Used
1980/01/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement
1981/04/22
Use 6V4089 Reamer Assembly To Clean Nozzle Bores
1981/05/20
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers
1981/06/03
Explanation Of Differences In Timing Advance Information
1981/08/26
New Broken Link Spring Used In Governor
1982/05/12
Change Made To Fuel Nozzle Assembly; New Bleed Screw Used
1982/08/25
New Torque Specification For Fuel Injection Pump Bushing
1982/09/22
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier
1982/11/10
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
New Governor Drive Gears And Weight Assemblies
1983/09/14
Remanufactured Fuel Pump And Governor Groups
1983/10/26
Service Information For Woodward Governors
1983/10/26
Fill Oil Sump Before Installing Woodward Governor
1985/01/16
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Fuel Transfer Pump Improved
1985/11/01
Bolt Removed From Governor And Fuel Injection Pump Group
1985/12/01
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
New Material Used For Disc In Valve Assemblies In Fuel Transfer Pump Groups
1986/09/01
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Seals In Variable Timing Advance Available For Parts Service
1988/08/01
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles
1989/03/01
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque
1989/09/01
Governor Control Motor Polarity May Require A Change
1990/11/01
New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly
1991/04/01
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/01
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN)
1992/04/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/01
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
Manufacturing And Design Improvements Incorporated Into Fuel Injection Nozzle Assemblies{1252,1307}
1997/07/01
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
New Fuel Nozzles Resist Adapter Cracking And Leaking {1254}
1999/06/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
The Edge Filter Is Now Removed from Fuel Nozzles {1254, 1290}
2009/04/20
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Calibration Fluid for Fuel Nozzle Test Equipment Is Available {0782, 1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Improved Manufacturing Processes Are Used for Remanufactured Fuel Injector Nozzles That Are Used in Certain Commercial Engines {1251, 1290}
2012/07/06
Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain Commercial Engines {1250, 1251, 1290, 1713}
2013/10/17
Cat® Reman Announces New Fuel Pump, Fuel Ratio Control, and Fuel Injector Options for Certain Engines {1251, 1278}
2014/09/05
Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Check Assembled Dimension for Rack Lever Travel{1264, 1250}
Check Assembled Dimension for Rack Lever Travel{1264, 1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Fuel Injection Pump
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzle
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Governor
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Lines<BR>
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Woodward PSG Governor
3304B & 3306B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Governor Control
3304B & 3306B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Fuel Injection Nozzles
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing &amp; Governor
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Governor
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Rocker Shaft Assembly &amp; Push Rods
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzles
3304B & 3306B MARINE ENGINES
Fuel Injection Pump Housing And Governor
3304B & 3306B MARINE ENGINES
Governor
3304B & 3306B MARINE ENGINES
Fuel Injection Pumps
3304B & 3306B MARINE ENGINES
Fuel Injection Pump Housing
3304B & 3306B MARINE ENGINES
Fuel Transfer Pump
3304B & 3306B MARINE ENGINES
Rocker Shaft Assembly And Push Rods
3304B & 3306B MARINE ENGINES
Rocker Shaft Assembly
3304B & 3306B MARINE ENGINES
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Use Two Wrenches On Fuel Line Nuts{1254,1252}
1981/04/13
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/05/18
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
New 6V4818 Driver Available To Install Rack Bearings In Fuel Injection Pump Housings{0622}
1982/02/08
New Broken Link Spring Used In Governor{1264}
1982/04/19
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Change Made To Fuel Nozzle Assembly; New Bleed Screw Used{1254}
1982/07/19
New Torque Specification For Fuel Injection Pump Bushing{1251,1253}
1982/08/09
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Tool Makes Installation Of Carbon Stop Seals Easier{0622,1254}
1982/10/04
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
New Fuel Ratio Control Group Has Improved Diaphragm{1278,1257,1251}
1983/08/15
New Governor Drive Gears And Weight Assemblies{1264}
1983/08/22
Service Information For Woodward Governors{0374,1264}
1983/09/26
Remanufactured Fuel Pump And Governor Groups{1251,1264}
1983/10/17
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Higher Torque Can Be Used With 6V6980 Nozzle Puller Group{0706,1254}
1985/06/10
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
New Bleed Screw Used In Fuel Injection Nozzle{1254}
1985/09/23
Fuel Transfer Pump Improved{1256}
1985/10/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups{1265,1264,1250}
1986/06/02
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Larger Diameter Holes Are Now Used In The Rocker Arm Shaft To Give More Oil Flow To Rocker Arm Bearings{1102}
1977/11/21
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Seals In Variable Timing Advance Available For Parts Service{1272}
1988/07/11
Check Assembled Dimension For Rack Lever Travel If Governor Housing Assembly Is Replaced {1264}
1988/12/19
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing{0626}
1979/01/08
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
Governor Control Motor Polarity May Require A Change{1265,1408,7556}
1990/10/29
New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly{1102,7553}
1991/03/25
New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly{1102,7553}
1991/04/15
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Improved Fuel Injection Line Assemblies And Clamps Used{1252}
1992/11/09
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Governor Control Cover Assembly Includes New Seal And Improved Cover {1264}
1997/07/07
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
New Fuel Nozzles Resist Adapter Cracking And Leaking {1254}
1999/06/14
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Caterpillar Parts SIS Catalog 3306 :

PUMP GP-FUEL INJECTION
2W-0256 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
2W-0256 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
6I-2833 PUMP GP-FUEL INJECTION
PUMP GP-GOV & FUEL INJ
8N-2525 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
8N-2525 PUMP GP-GOV & FUEL INJ
PUMP GP-FUEL TRANSFER
7N-6831 PUMP GP-FUEL TRANSFER
GOVERNOR GP
2W-4107 GOVERNOR GP
GOVERNOR GP
2W-4107 GOVERNOR GP
PUMP GP-FUEL INJECTION
2W-6179 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
2W-6179 PUMP GP-FUEL INJECTION
HOUSING AS-FUEL PUMP
1W-3487 HOUSING AS-FUEL PUMP
PUMP GP-FUEL INJECTION
1W-6539 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
8N-2517 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7W-5928 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
1W-6539 PUMP GP-FUEL INJECTION
PUMP GP-GOV & FUEL INJ
7W-5932 PUMP GP-GOV & FUEL INJ

Truck sale:

 
9,775 
Caterpillar 3306T, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
FINANZAUTO S.A.
Caterpillar 3306T, Stationary Generator Sets, Construction
35,500 
Caterpillar 3306T, Stationary Generator Sets, Construction
- Stationary Generator Sets
RING POWER CORP.
Caterpillar 3306, Stationary Generator Sets, Construction
8,185 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3306, Stationary Generator Sets, Construction
41,500 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
35,000 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.