AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4N1045 ROCKER ARM GP PART OF 4N2271 & 4W2461 VALVE MECHANISMS 3406B GEN SET ENGINE


BASIC ENGINE
VALVE MECHANISM GP

GEN SET ENGINE 3406B GEN SET ENGINE 2WB
 3406B GENERATOR SET ENGINE 2WB00001-11475 SEBP1436 3406B 2WB   (1983)

BASIC ENGINE

VALVE MECHANISM GP
VALVE MECHANISM GP
4N-2271 VALVE MECHANISM GP
VALVE MECHANISM GP
4N-2271 VALVE MECHANISM GP
ROCKER ARM GP
4N-1045 ROCKER ARM GP
VALVE MECHANISM GP
4W-2461 VALVE MECHANISM GP
ROCKER ARM GP
4P-5258 ROCKER ARM GP
VALVE MECHANISM GP
4P-5712 VALVE MECHANISM GP
 

#SEBP14360140
 

4N-1045: ROCKER ARM GP

4N1045 ROCKER ARM GP
PART OF 4N2271 & 4W2461 VALVE MECHANISMS
c629832 SEBP1436
4N1045 ROCKER ARM GP Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 006-7403 [2] RING-RETAINING  
2. 2N-7228 [2] WASHER  
3. 4N-0955 [2] DOWEL  
4. 2N-7229 [2] SPRING  
5. 4N-0839 [1] SHAFT AS-ROCKER ARM  
6. 0L-1022 C [2] PLUG-CUP  
7. 9Y-4384 [2] BRACKET-SHAFT  
8. 4N-5614 [6] ROCKER ARM AS  
9. 9Y-4383 [1] BRACKET-SHAFT  
10. 108-5603 [6] SCREW-ROCKER ADJUSTMENT  
11. 9L-7712 [6] NUT (3/8 X 24 THD)  
12. 2N-7228 B [2] WASHER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14360141
 

4W-2461: VALVE MECHANISM GP

4W2461 VALVE MECHANISM GP
4N1045-PAGE 38
c564394 SEBP1436
4W2461 VALVE MECHANISM GP Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1045 Y [2] ROCKER ARM GP  
2. 101-1818 [6] BRIDGE AS-EXHAUST  
    (EACH INCLUDES)
3. 2N-5842 [1] SCREW  
4. 9L-7712 [6] NUT  
5. 4W-5998 [12] ROD AS-PUSH  
6. 6N-6872 [12] SPRING-GUIDE  
7. 101-7788 [12] LIFTER AS-VALVE  
8. 101-1816 [6] BRIDGE AS-INTAKE  
    (EACH INCLUDES)
9. 2N-5842 [1] SCREW  
10. 9L-7712 [1] NUT  
11. 4N-5607 [1] SEAT-WEAR  
12. 2P-9845 [6] BOLT  
13. 5H-1504 [6] WASHER-HARD  
  Y   SEPARATE ILLUSTRATION
 

#SEBP14360142
 

4P-5258: ROCKER ARM GP

4P5258 ARM GP-ROCKER
S/N 2WB10138-UP
PART OF 4P5712 VALVE MECHANISM
c575287 SEBP1436
4P5258 ROCKER ARM GP Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 006-7403 [2] RING-RETAINING  
2. 2N-7228 [2] WASHER  
3. 4N-0955 [2] PIN-DOWEL  
4. 2N-7229 [2] SPRING  
5. 4P-5261 [1] SHAFT AS-ARM  
6. 0L-1022 [2] PLUG-CUP  
7. 9Y-4384 [2] BRACKET-SHAFT  
8. 4P-5259 [6] ARM AS-ROCKER  
9. 9Y-4383 [1] BRACKET-SHAFT  
10. 108-5603 [6] SCREW-ROCKER ADJUSTMENT  
11. 9L-7712 [6] NUT  
12. 2N-7228 B [2] WASHER  
  B   USE AS REQUIRED
 

#SEBP14360143
 

4P-5712: VALVE MECHANISM GP

4P5712 VALVE MECHANISM GP
S/N 2WB10138-UP
4P5258-PAGE 38.03
c676650 SEBP1436
4P5712 VALVE MECHANISM GP Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-5258 Y [2] ROCKER ARM GP  
2. 4W-2684 [6] BRIDGE AS-EXHAUST  
    (EACH INCLUDES)
3. 2N-5842 [1] SCREW  
4. 9L-7712 [1] NUT  
5. 4W-5998 [12] PUSHROD AS  
6. 6N-6872 [12] SPRING-GUIDE  
7. 101-7788 [12] LIFTER AS-VALVE  
8. 101-1818 [6] BRIDGE AS-EXHAUST  
    (EACH INCLUDES)
9. 2N-5842 [1] SCREW  
10. 9L-7712 [1] NUT  
11. 5H-1504 [6] WASHER-HARD  
12. 2P-9845 [6] BOLT  
  Y   SEPARATE ILLUSTRATION
 

#SEBP14360144
 

4N-4953: COVER GP-VALVE MECHANISM

4N4953 COVER GP-VALVE MECHANISM
S/N 2WB1-3111
c303920 SEBP1436
4N4953 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-4535 [2] BASE-ARM COVER  
  5P-5678 CD SEAL 2.91M(114.5IN)  
2. 9L-8925 [23] BOLT  
3. 4N-4536 [1] COVER-ROCKER ARM  
  5P-5678 CD SEAL 1.44M(56.75IN)  
4. 4N-0851 [1] ADAPTER  
5. 4N-4537 [1] COVER-ROCKER ARM  
  5P-5678 CD SEAL 1.44M(56.75IN)  
6. 4N-4957 [1] PLUG  
7. 1B-2790 CB [3] BOLT  
  9M-1974 CB [3] WASHER  
8. 9L-8925 B [3] BOLT  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
 

#SEBP14360145
 

4N-2272: COVER GP-VALVE MECHANISM

4N2272 COVER GP-VALVE MECHANISM
S/N 2WB1-3111
c218393 SEBP1436
4N2272 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-8925 C [26] BOLT  
2. 4N-4536 [1] COVER-ROCKER ARM  
3. 5P-3218 BC SEAL 5.79M(228IN)  
4. 4N-4537 [1] COVER-ROCKER ARM  
5. 4N-4535 [2] BASE-ARM COVER  
6. 6N-2985 C [1] CAP AS-FILLER  
7. 4N-0851 [2] ADAPTER  
8. 2H-3755 [1] BOLT  
  9M-1974 C [1] WASHER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14360146
 

4N-2272: COVER GP-VALVE MECHANISM

4N2272 COVER GP-VALVE MECHANISM
S/N 2WB3112-7461
c450885 SEBP1436
4N2272 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-4538 C [1] COVER AS-ROCKER ARM  
  8C-5196 C [2] SEAL-O-RING  
2. 7C-6514 C [2] ADAPTER  
3. 4N-4536 [1] COVER-ROCKER ARM  
4. 9L-8925 [26] BOLT  
5. 5P-5678 CBD SEAL  
6. 4N-4537 [1] COVER-ROCKER ARM  
7. 6N-2985 [1] CAP AS-FILLER  
8. 2H-3755 [1] BOLT  
9. 9M-1974 [1] WASHER  
10. 7C-0061 C [2] BASE-ARM COVER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
 

#SEBP14360147
 

4N-2272: COVER GP-VALVE MECHANISM

4N2272 COVER GP-VALVE MECHANISM
S/N 2WB7462-UP
c479870 SEBP1436
4N2272 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-0330 C [1] COVER  
2. 7C-6514 [2] ADAPTER  
  8C-5196 [2] SEAL-O-RING  
3. 7E-0329 C [2] BASE  
4. 9L-8925 [26] BOLT  
5. 5P-5678 BD SEAL  
6. 7E-0333 C [1] COVER  
7. 6N-2985 [1] CAP AS-FILLER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
 

#SEBP14360148
 

4N-4953: COVER GP-VALVE MECHANISM

4N4953 COVER GP-VALVE MECHANISM
S/N 2WB3112-7461
c406347 SEBP1436
4N4953 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-0061 C [2] BASE-ARM COVER  
2. 7C-9621 C [1] PLUG  
  8C-5196 C [1] SEAL-O-RING  
3. 7C-9667 [1] COVER-ROCKER ARM  
4. 9L-8925 [23] BOLT  
5. 5P-5678 BD SEAL  
6. 4N-4537 [1] COVER-ROCKER ARM  
7. 9L-8925 B [3] BOLT  
8. 1B-2790 B [3] BOLT  
  9M-1974 B [3] WASHER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
 

#SEBP14360149
 

4N-4953: COVER GP-VALVE MECHANISM

4N4953 COVER GP-VALVE MECHANISM
S/N 2WB7462-UP
c479891 SEBP1436
4N4953 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-0329 C [2] BASE  
2. 7C-6514 C [1] ADAPTER  
  8C-5196 [1] SEAL-O-RING  
3. 7C-9667 [1] COVER-ROCKER ARM  
4. 9L-8925 [23] BOLT  
5. 5P-5678 BD SEAL  
6. 7E-0333 C [1] COVER  
7. 9L-8925 B [3] BOLT (5/16-18X1.25IN)  
8. 1B-2790 B [3] BOLT (5/16-18X1.375IN)  
  9M-1974 B [3] WASHER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
 

Information:

Engine News
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem "Use Again" Specifications
1983/03/16
New Valve Lifter Assemblies Used In Valve Mechanism Groups
1983/11/30
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads
1984/05/16
Surface Grinding Of Compacted Graphite Iron Cylinder Heads
1984/07/11
New High Alloy Material Is Used In Cylinder Head Assemblies
1984/10/24
New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used
1984/10/24
New Tools Available To Service Fuel Injection Nozzles And Adapters
1985/01/16
A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01
Extra Injection Nozzle Clamp Helps Prevent Injection Nozzle Damage
1985/08/01
Adjust Bridge Whenever Valve Clearance Adjustments Are Made
1986/04/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed
1986/10/01
Change To Interval For Valve Lash Adjustment
1987/02/01
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts
1987/04/01
Silicone Rubber Water Seals Available
1987/07/01
High Alloy Cylinder Head Improved
1987/07/01
Improved Valve Mechanism Cover Groups
1988/01/01
Seal Retainer And Seals Are Required When A New Cylinder Head Assembly Is Installed
1988/11/01
New Head Gasket Available; Head Gasket Replacement Guidelines
1989/02/01
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips
1989/08/01
Improved Head Gasket Used; Service Tips
1990/03/01
New Valve Lifter Improves Oil Flow To Top Of Engine
1990/04/01
Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary
1990/05/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
New Cylinder Heads Have Additional Coolant Passages
1992/06/01
Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/02/01
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/18
New Rocker Arm Adjustment Screw Used To Adjust Valve Clearance {1123,1100}
1994/06/01
New Valve Lifter Assembly Provides Improved Lubrication Of Lifter Roller And Camshaft Lobes {1209,1210}
1994/06/01
New Inlet And Exhaust Valves Have Thinner Heads{1105}
1995/02/01
Valve Lash Adjustment Intervals{1105}
1995/08/01
New And Reconditioned Valve Projection Specifications{1105}
1995/09/01
New Stronger Cylinder Head Bolts Used{1100}
1996/05/09
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads
1977/06/29
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
A New Guide Spring for the Camshaft Lifter is Now Used {1102}
2008/03/17
A New Tool Is Used to Insert the Valve Lifter Guide Spring into Certain Commercial Engines {0703, 1102}
2012/12/06
Cat<SUP>&reg;</SUP> Reman Has Added Valve Lifters, Rocker Arms, and Camshafts for Certain Engines and Generator Set Engines {1123, 1130, 1209, 1210}
2014/09/05
Special Instruction
Installation of 0R1160, 0R1161 and 0R1248 Remanufactured Cylinder Head Groups{1100}
Installation of 0R1160, 0R1161 and 0R1248 Remanufactured Cylinder Head Groups{1100}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Installation Of Valve Guides Without Removing Cylinder Head{1104}
Installation Of Valve Guides Without Removing Cylinder Head{1104}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Technical Information Bulletin
Replacement Procedure:
Replacement Procedure:
Failures of the 305-6843 Guide Spring on Certain Engines{1102, 1121, 1123, 1209}
Failures of the 305-6843 Guide Spring on Certain Engines{1102, 1121, 1123, 1209}
Specifications
Valve Covers
3406 & 3406B GENERATOR SET ENGINE
Valves
3406 & 3406B GENERATOR SET ENGINE
Valve Rocker Arms, Lifters And Bridges
3406 & 3406B GENERATOR SET ENGINE
Cylinder Head
3406 & 3406B GENERATOR SET ENGINE
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Valve Covers
3406B DIESEL ENGINE FOR GENERATOR SETS
Rocker Shaft Assemblies And Push Rods
3406B DIESEL ENGINE FOR GENERATOR SETS
Rocker Shaft Assemblies
3406B DIESEL ENGINE FOR GENERATOR SETS
Valve Lifters
3406B DIESEL ENGINE FOR GENERATOR SETS
Fuel Injection Nozzles And Adapters
3406B DIESEL ENGINE FOR GENERATOR SETS
Cylinder Head Assembly
3406B DIESEL ENGINE FOR GENERATOR SETS
Valves
3406B DIESEL ENGINE FOR GENERATOR SETS
Valve Seat Inserts
3406B DIESEL ENGINE FOR GENERATOR SETS
Bridge Dowels
3406B DIESEL ENGINE FOR GENERATOR SETS
Valve Guides
3406B DIESEL ENGINE FOR GENERATOR SETS
Service Magazine
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
New Valve Lifter Assemblies Used In Valve Mechanism Groups{1209}
1983/10/31
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30
Adjust Bridge Whenever Valve Clearance Adjustments Are Made{1121,1105,1100}
1986/04/07
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed{1000,1100,1200}
1986/09/08
Avoid Oil Contact With New Water Passage Seals Used In Cylinder Head Groups{1100}
1986/12/15
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Remanufactured Cylinder Heads For 3406 Engines{1100}
1987/03/16
Silicone Rubber Water Seals Available{1100}
1987/07/06
High Alloy Cylinder Head Improved{1101}
1987/07/06
Improved Valve Mechanism Cover Groups{1107}
1987/12/14
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Additional Information For Checking Valve Camshaft Timing{1105,1110,1112,1121}
1989/12/11
Improved Head Gasket Used; Service Tips {1124,1216,1221,7568}
1990/02/26
New Valve Lifter Improves Oil Flow To Top Of Engine{1112,1119}
1990/04/02
Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary{1121}
1990/04/30
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
New Cylinder Heads Have Additional Coolant Passages{1101,1100}
1992/06/29
Camshaft Lobe Surface Finish Improved; Camshaft Drive Gear Installation Procedure {1209,1210,1212}
1993/09/13
Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/02/07
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/04
New Cylinder Head Gasket, Spacer Plate And Head Bolts Used; New Cylinder Liner Projection Measurement Method; New Cylinder Head Torque Sequence; Improved Coolant Flow (Cylinder Heads) {1124,1221,1216,1101}
1994/07/04

Caterpillar Parts SIS Catalog 3406B :

VALVE MECHANISM GP
4N-2271 VALVE MECHANISM GP
VALVE MECHANISM GP
4N-2271 VALVE MECHANISM GP
CYLINDER HEAD AS
4W-5317 CYLINDER HEAD AS
CYLINDER HEAD AS
7W-2204 CYLINDER HEAD AS
CYLINDER HEAD AS
7W-2201 CYLINDER HEAD AS
CYLINDER HEAD AS
9Y-3775 CYLINDER HEAD AS
CYLINDER HEAD AS
7W-0009 CYLINDER HEAD AS
CYLINDER HEAD AS
7W-0009 CYLINDER HEAD AS
VALVE MECHANISM GP
4W-2461 VALVE MECHANISM GP
ROCKER ARM GP
4P-5258 ROCKER ARM GP
VALVE MECHANISM GP
4P-5712 VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
4N-4953 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
4N-2272 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
4N-2272 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
4N-2272 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
4N-4953 COVER GP-VALVE MECHANISM

Truck sale:

1990 CAT 3406B
USD $25,000 
1990 CAT 3406B

Power Generation Enterprises Inc.
North Hollywood, California
1991 CAT 3406B
USD $22,000 
1991 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
1989 CAT 3406B
USD $35,000 
1989 CAT 3406B

Worldwide Power Products LLC
Houston, Texas
1988 CAT 3406B
USD $29,000 
1988 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
CATERPILLAR 3406B 1988
$29,000 USD 
CATERPILLAR 3406B 1988
- MARINE - PROPULSION
RANSOME ENGINE POWER
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.