AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4W1566 LINES GP-FUEL INJECTION S/N 2WB11355-UP 4W7017-PAGE 151.03, 4P9658 & 4P9659-PAGE 152.00.07, 4P9660-PAGE 152.00.08 3406B


FUEL SYSTEM
LINES GP-FUEL
PUMP GP-FUEL INJECTION
LINES GP-FUEL

GEN SET ENGINE 3406B GEN SET ENGINE 2WB
 3406B GENERATOR SET ENGINE 2WB00001-11475 SEBP1436 3406B 2WB   (1983)

FUEL SYSTEM

LINES GP-FUEL
LINES GP-FUEL INJECTION
4W-1566 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4W-1566 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4W-1566 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
9Y-3070 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
9Y-3070 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
9Y-3070 LINES GP-FUEL INJECTION
 

#SEBP14360530
 

4W-1566: LINES GP-FUEL INJECTION

4W1566 LINES GP-FUEL INJECTION
S/N 2WB11355-UP
4W7017-PAGE 151.03, 4P9658 & 4P9659-PAGE 152.00.07, 4P9660-PAGE 152.00.08
c705473 SEBP1436
4W1566 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-9658 Y [1] LINES GP-FUEL INJECTION  
2. 4P-9659 Y [1] LINES GP-FUEL INJECTION  
3. 4P-9660 Y [1] LINES GP-FUEL INJECTION  
4. 4P-1396 [6] ADAPTER AS  
    (EACH INCLUDES)
5. 8M-4437 [1] SEAL-O-RING  
6. 4W-7017 RY [6] NOZZLE AS-FUEL VALVE  
7. 7C-3427 [6] LINE AS-FUEL INJ  
    (EACH INCLUDES)
  1H-1023 [1] SEAL-O-RING (9.25MM ID)  
8. 7W-2315 [6] RETAINER  
9. 141-2674 [1] BRACKET  
10. 8H-9204 [6] WASHER-FELT  
11. 9L-9814 [6] LOCKNUT  
12. 141-2676 [1] BRACKET AS  
13. 141-2675 [1] BRACKET  
14. 0S-1615 [6] BOLT (1/4-20X.75IN)  
  5P-0537 [6] WASHER (2MM THK)  
15. 7C-9198 [3] BLOCK  
16. 1A-9579 [3] BOLT (5/16-18X1.5IN)  
17. 9M-1974 [8] WASHER-HARD  
18. 0S-1618 [2] BOLT (5/16X18X1IN)  
19. 054-4984 [1] SPACER  
20. 1B-2790 [1] BOLT (5/16-18X1.375IN)  
21. 0S-1617 [2] BOLT (5/16-18X.75IN)  
22. 141-2672 [1] BRACKET  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14360531
 

4W-7018: NOZZLE AS-FUEL VALVE

4W7018 NOZZLE AS-FUEL VALVE-*R
S/N 2WB1677-UP
PART OF 4W8293 LINES-FUEL INJECTION
c617919 SEBP1436
4W7018 NOZZLE AS-FUEL VALVE Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-9098 [1] SEAL-CARBON STOP  
2. 7W-4482 [1] WASHER (17.14X9.76X3.18-MM THK)  
3. 271-2489 [1] SEAL-WASHER  
4. 9X-2836 M [1] SCREW-BUTTON HEAD  
5. 114-3362 [1] SEAL-O-RING  
6. 1W-8791 [1] TIP AS-FUEL INJECTOR  
  M   METRIC PART
 

#SEBP14360532
 

4W-7017: NOZZLE AS-FUEL VALVE

4W7017 NOZZLE AS-FUEL VALVE-D.I.*R
S/N 2WB1677-UP
PART OF 1W0557 & 4W1566 LINES-FUEL INJECTION
c621820 SEBP1436
4W7017 NOZZLE AS-FUEL VALVE Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-9098 [1] SEAL-CARBON STOP  
2. 7W-4487 [1] WASHER  
3. 9X-2836 M [1] SCREW-BUTTON HEAD  
  114-3364 [1] WASHER (SEALING)  
  M   METRIC PART
 

#SEBP14360533
 

9Y-3070: LINES GP-FUEL INJECTION

9Y3070 LINES GP-FUEL INJECTION
TYPE 1. S/N 2WB9234-UP
4P3673-PAGE 152.00.05, 4P3675 & 4P3674-PAGE 152.00.06
c584873 SEBP1436
9Y3070 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-3673 CY [1] LINES GP-FUEL INJECTION  
2. 4P-3674 CY [1] LINES GP-FUEL INJECTION  
3. 4P-3675 CY [1] LINES GP-FUEL INJECTION  
4. 4N-1797 [6] ADAPTER AS  
    (EACH INCLUDES)
5. 8M-4437 [1] SEAL-O-RING  
6. 7W-7037 R [6] NOZZLE AS  
    (EACH INCLUDES)
7. 9L-9098 [1] SEAL-CARBON STOP  
8. 7W-4487 [1] WASHER  
9. 8C-3234 [1] SCREW-BUTTON HEAD  
  8T-0659 [1] WASHER-SEALING  
10. 7W-2315 [6] RETAINER  
11. 8H-9204 [6] WASHER-FELT  
12. 9L-9814 [6] NUT-SELF LOCKING  
13. 4N-1292 [6] LOCK-ADAPTER  
14. 7C-9198 C [3] BLOCK  
15. 9Y-9154 C [1] BRACKET  
16. 9Y-9153 C [2] BRACKET  
17. 0S-1615 C [6] BOLT  
  5P-0537 C [6] WASHER  
18. 1A-9579 C [4] BOLT  
19. 0S-1618 [2] BOLT  
20. 9M-1974 C [6] WASHER-HARD  
21. 054-4984 C [1] SPACER  
22. 7C-3427 [6] LINE AS-FUEL INJ  
    EACH INCLUDES
  1H-1023 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14360534
 

9Y-3070: LINES GP-FUEL INJECTION

9Y3070 LINES GP-FUEL INJECTION
TYPE 2. S/N 2WB9234-UP
4P9658 & 4P9659-PAGE 152.00.07, 4P9660-PAGE 152.00.08
c584874 SEBP1436
9Y3070 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-9658 CY [1] LINES GP-FUEL INJECTION  
2. 4P-9659 CY [1] LINES GP-FUEL INJECTION  
3. 4P-9660 CY [1] LINES GP-FUEL INJECTION  
4. 4N-1797 [6] ADAPTER AS  
    (EACH INCLUDES)
5. 8M-4437 [1] SEAL-O-RING  
6. 7W-7037 R [6] NOZZLE AS  
    (EACH INCLUDES)
7. 9L-9098 [1] SEAL-CARBON STOP  
8. 7W-4487 [1] WASHER  
9. 8C-3234 [1] SCREW-BUTTON HEAD  
  8T-0659 [1] WASHER-SEALING  
10. 7W-2315 [6] RETAINER  
11. 8H-9204 [6] WASHER-FELT  
12. 9L-9814 [6] NUT-SELF LOCKING  
13. 4N-1292 [6] LOCK-ADAPTER  
14. 7C-9198 [3] BLOCK  
15. 4P-3946 [1] BRACKET  
16. 4P-3945 [2] BRACKET  
17. 0S-1615 [6] BOLT  
  5P-0537 [6] WASHER  
18. 1A-9579 [3] BOLT  
19. 0S-1618 [2] BOLT  
20. 9M-1974 [6] WASHER-HARD  
21. 054-4984 [1] SPACER  
22. 7C-3427 [6] LINE AS-FUEL INJ  
    EACH INCLUDES
  1H-1023 [1] SEAL-O-RING  
23. 1B-2790 [1] BOLT  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14360535
 

9Y-3070: LINES GP-FUEL INJECTION

9Y3070 LINES GP-FUEL INJECTION
TYPE 3. S/N 2WB9234-UP
4P9658 & 4P9659-PAGE 152.00.07, 4P9660-PAGE 152.00.08
c700385 SEBP1436
9Y3070 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-9658 CY [1] LINES GP-FUEL INJECTION  
2. 4P-9659 CY [1] LINES GP-FUEL INJECTION  
3. 4P-9660 CY [1] LINES GP-FUEL INJECTION  
4. 4P-1396 [6] ADAPTER AS  
    (EACH INCLUDES)
5. 8M-4437 [1] SEAL-O-RING  
6. 7W-7037 R [6] NOZZLE AS  
    (EACH INCLUDES)
7. 9L-9098 [1] SEAL-CARBON STOP (3/8 IN OD)  
8. 7W-4487 [1] WASHER (9.76MM ID)  
9. 8C-3234 [1] SCREW-BUTTON HEAD  
  8T-0659 [1] WASHER-SEAL  
10. 7W-2315 [6] RETAINER  
11. 8H-9204 [6] WASHER-FELT  
12. 9L-9814 [6] LOCKNUT  
13. 0S-1617 [2] BOLT (5/16-18X.75IN)  
14. 7C-9198 [3] BLOCK  
15. 141-2676 [1] BRACKET AS  
16. 141-2675 [1] BRACKET  
17. 0S-1615 [6] BOLT (1/4-20X.75IN)  
  5P-0537 [6] WASHER (2MM THK)  
18. 1A-9579 [3] BOLT (5/16-18X1.5IN)  
19. 0S-1618 [2] BOLT (5/16X18X1IN)  
20. 9M-1974 [8] WASHER-HARD (2MM THK)  
21. 054-4984 [1] SPACER  
22. 7C-3427 [6] LINE AS-FUEL INJ  
    EACH INCLUDES
  1H-1023 [1] SEAL-O-RING (9.25MM ID)  
23. 1B-2790 [1] BOLT (5/16-18X1.375IN)  
24. 141-2674 [1] BRACKET  
25. 141-2672 [1] BRACKET  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14360536
 

4W-8293: LINES GP-FUEL INJECTION

4W8293 FUEL INJECTION LINES GROUP
S/N 2WB1-1676
2W3776 & 2W3777-PAGE 152
c584881 SEBP1436
4W8293 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-3776 Y [1] LINES GP-FUEL INJECTION  
2. 2W-3777 Y [1] LINES GP-FUEL INJECTION  
3. 4N-1292 [6] LOCK-ADAPTER  
4. 4N-1797 [6] ADAPTER AS  
    (EACH INCLUDES)
5. 8M-4437 [1] SEAL-O-RING  
6. 4W-7012 [6] NOZZLE AS-VALVE  
    (EACH INCLUDES)
7. 9L-9098 [1] SEAL-CARBON STOP  
8. 4W-6060 [1] WASHER  
9. 2W-1230 [1] SCREW-BUTTON HEAD  
10. 8T-0659 [1] WASHER-SEALING  
11. 4W-9352 [6] LINE AS-FUEL INJ  
    (EACH INCLUDES)
12. 1H-1023 [1] SEAL-O-RING  
13. 1T-0416 [6] BOLT  
14. 7W-1997 [6] CLAMP-DIRECT INJ NOZZLE  
15. 9L-9814 [6] NUT-SELF LOCKING  
16. 2W-2063 [6] PLUG-NOZZLE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP14360537
 

4W-8293: LINES GP-FUEL INJECTION

4W8293 LINES GP-FUEL INJECTION
S/N 2WB1677-2994
2W3776 & 2W3777-PAGE 152
c325698 SEBP1436
4W8293 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-3776 Y [1] LINES GP-FUEL INJECTION  
2. 2W-3777 Y [1] LINES GP-FUEL INJECTION  
3. 4N-1292 [6] LOCK-ADAPTER  
4. 4N-1797 [6] ADAPTER AS  
    (EACH INCLUDES)
5. 8M-4437 [1] SEAL-O-RING  
6. 4W-7018 CR [6] NOZZLE AS-FUEL VALVE  
    (EACH INCLUDES)
7. 9L-9098 [1] SEAL-CARBON STOP  
8. 7W-4482 [1] WASHER  
9. 2W-1230 [1] SCREW-BUTTON HEAD  
10. 8T-0659 [1] WASHER-SEALING  
11. 4W-9352 [6] LINE AS-FUEL INJ  
    (EACH INCLUDES)
12. 1H-1023 [1] SEAL-O-RING  
13. 7W-2315 C [6] RETAINER  
14. 9L-9814 [6] NUT-SELF LOCKING  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14360538
 

4W-8293: LINES GP-FUEL INJECTION

4W8293 LINES GP-FUEL INJECTION
S/N 2WB2995-3383
7W8627 & 7W8628-PAGE 152.00.01
c718743 SEBP1436
4W8293 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-8627 CY [1] LINES GP-FUEL INJECTION  
2. 7W-8628 CY [1] LINES GP-FUEL INJECTION  
3. 4N-1292 [6] LOCK-ADAPTER  
4. 4N-1797 [6] ADAPTER AS  
    (EACH INCLUDES)
5. 8M-4437 [1] SEAL-O-RING  
6. 4W-7018 RY [6] NOZZLE AS-FUEL VALVE  
7. 7W-8629 C [6] LINE AS-FUEL INJ  
8. 1H-1023 [1] SEAL-O-RING  
9. 7W-2315 [6] RETAINER  
10. 9L-9814 [6] LOCKNUT  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14360539
 

4W-8293: LINES GP-FUEL INJECTION

4W8293 LINES GP-FUEL INJECTION
S/N 2WB3384-4119
4W7018-PAGE 151.02, 7C2107 & 7C2108-PAGE 152.00.02
c401271 SEBP1436
4W8293 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-2107 CY [1] LINES GP-FUEL INJECTION  
2. 7C-2108 CY [1] LINES GP-FUEL INJECTION  
3. 4N-1292 [6] LOCK-ADAPTER  
4. 4N-1797 [6] ADAPTER AS  
    (EACH INCLUDES)
5. 8M-4437 [1] SEAL-O-RING  
6. 4W-7018 CRY [6] NOZZLE AS-FUEL VALVE  
7. 7C-2109 [6] LINE AS-FUEL INJ  
    (EACH INCLUDES)
  1H-1023 [1] SEAL-O-RING  
8. 7W-2315 [6] RETAINER  
9. 9L-9814 [6] NUT-SELF LOCKING  
10. 8H-9204 C [6] WASHER-FELT  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Use New Adapter To Make Tests Of 9L6884 Nozzles
1979/05/09
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Improvements To Optional Modification Of 5P4150 Nozzle Tester
1981/08/26
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used
1984/10/24
New Tools Available To Service Fuel Injection Nozzles And Adapters
1985/01/16
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01
Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced
1985/05/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Gasket Leakage On Aftermarket Fuel Filters
1986/01/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles
1986/10/01
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles
1989/03/01
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque
1989/09/01
New Fuel Line Assemblies And Adapter Assembly Used
1992/02/01
5P7437 Adapter (Part Of 8T5301 Diesel Timing Adapter Group) Must Be Modified To Work On Current Fuel Lines.
1992/02/01
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN)
1992/04/01
Improved 1R-0712 Fuel Filter Available{1261}
1994/03/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/01
Fuel Injection Nozzle Spray Orifice Plugging{1254}
1994/07/01
Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/23
New O-Ring Seals Used On "Through-Head-Adapter" And "Internal Fuel Lines" In Fuel Injection Lines Groups{1252}
1996/11/01
New Fuel Line Support Brackets Help Eliminate Vibration {1252}
1997/12/16
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
Needle Valve May Be Needed To Accurately Measure Engine Return Fuel Flow{1250,0782}
1999/04/01
Special Instruction
Installation of 9Y3499 Fuel Line Clamps Parts Kit{1252}
Installation of 9Y3499 Fuel Line Clamps Parts Kit{1252}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Service Letter-NACD
Product Support Program For Replacing Cracked Fuel Lines On Certain 3406C Engines Used In Certain Machine, Commercial, Industrial And Marine Applications
Product Support Program For Replacing Cracked Fuel Lines On Certain 3406C Engines Used In Certain Machine, Commercial, Industrial And Marine Applications
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Fuel Injection Lines
3406 & 3406B GENERATOR SET ENGINE
Fuel Injection Nozzle And Adapter (Earlier) (3406B)
3406 & 3406B GENERATOR SET ENGINE
Fuel Injection Nozzle And Adapter (Later) (3406B)
3406 & 3406B GENERATOR SET ENGINE
Fuel Injection Lines (3406)
3406 & 3406B GENERATOR SET ENGINE
Fuel Injection Lines<BR> (Double Walled)
3400 GENERATOR SET ENGINE ATTACHMENTS
Service Letter-China
Product Support Program For Replacing Cracked Fuel Lines On Certain 3406C Engines Used In Certain Machine, Commercial, Industrial And Marine Applications
Product Support Program For Replacing Cracked Fuel Lines On Certain 3406C Engines Used In Certain Machine, Commercial, Industrial And Marine Applications
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Injection Lines
3406B DIESEL ENGINE FOR GENERATOR SETS
Fuel Filter And Base
3406B DIESEL ENGINE FOR GENERATOR SETS
Fuel Injection Line Adapters
3406B DIESEL ENGINE FOR GENERATOR SETS
Fuel Injection Nozzles And Adapters
3406B DIESEL ENGINE FOR GENERATOR SETS
Service Magazine
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
New Valve Assembly And Seal Used In Fuel Transfer Pump{1256}
1984/05/14
New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used{1101,1106}
1984/10/29
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
New Tools Available To Service Fuel Injection Nozzles And Adapters {0706,1254}
1985/01/14
Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced{1254}
1985/03/18
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Extra Injection Nozzle Clamp Helps Prevent Injection Nozzle Damage{1252}
1985/07/15
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Special Bolts Help Prevent Unauthorized Modification Of Fuel System And Governor Settings{1250,1264,1278,1287}
1985/11/11
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
5P7437 Adapter (Part Of 8T5301 Diesel Timing Adapter Group) Must Be Modified To Work On Current Fuel Lines.{0782}
1992/02/03
New Fuel Line Assemblies And Adapter Assembly Used{1252}
1992/02/17
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26

Caterpillar Parts SIS Catalog 3406B :

LINES GP-FUEL INJECTION
4W-1566 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4W-1566 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4W-1566 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4W-1566 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
1W-0557 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
1W-0557 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
1W-0557 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
1W-0557 LINES GP-FUEL INJECTION
NOZZLE AS-FUEL VALVE
4W-7018 NOZZLE AS-FUEL VALVE
NOZZLE AS-FUEL VALVE
4W-7017 NOZZLE AS-FUEL VALVE
LINES GP-FUEL INJECTION
9Y-3070 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
9Y-3070 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
9Y-3070 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4W-8293 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4W-8293 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4W-8293 LINES GP-FUEL INJECTION

Truck sale:

1990 CAT 3406B
USD $25,000 
1990 CAT 3406B

Power Generation Enterprises Inc.
North Hollywood, California
1991 CAT 3406B
USD $22,000 
1991 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
1989 CAT 3406B
USD $35,000 
1989 CAT 3406B

Worldwide Power Products LLC
Houston, Texas
1988 CAT 3406B
USD $29,000 
1988 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
CATERPILLAR 3406B 1988
$29,000 USD 
CATERPILLAR 3406B 1988
- MARINE - PROPULSION
RANSOME ENGINE POWER
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.