AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4P1383 PUMP GP-FUEL INJECTION TYPE 3. S/N 2WB9234-UP 1086633-PAGE 166F.02 PART OF 7W0043, 7W0066, 7W0067 FUEL INJECTION PUMPS 3406B


FUEL SYSTEM
PUMP GP-FUEL INJECTION
GOVERNOR GP

GEN SET ENGINE 3406B GEN SET ENGINE 2WB
 3406B GENERATOR SET ENGINE 2WB00001-11475 SEBP1436 3406B 2WB   (1983)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1383 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1383 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1383 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1385 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1385 PUMP GP-FUEL INJECTION
PUMP GP-GOV & FUEL INJ
7E-0257 PUMP GP-GOV & FUEL INJ
 

#SEBP14360620
 

4P-1383: PUMP GP-FUEL INJECTION

4P1383 PUMP GP-FUEL INJECTION
TYPE 3. S/N 2WB9234-UP
1086633-PAGE 166F.02
PART OF 7W0043, 7W0066, 7W0067 FUEL INJECTION PUMPS
c718449 SEBP1436
4P1383 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-5887 [1] HOUSING AS-FUEL PUMP  
2. 4F-2099 [1] DOWEL  
3. 1S-1953 [1] BEARING-RACK  
4. 7E-6002 [1] BEARING-SLEEVE  
5. 7E-6003 [1] BEARING-SLEEVE  
6. 7E-6004 [1] BEARING-SLEEVE  
7. 8N-0654 [6] DOWEL  
8. 1W-3285 [1] BEARING-RACK  
9. 8N-3731 [6] PIN-LIFTER GUIDE  
10. 3H-0442 [6] SEAL-O-RING  
11. 8N-9367 [1] RACK-REGULATOR  
12. 9S-8001 [1] PLUG-O-RING  
13. 109-9685 [1] SEAL-O-RING  
14. 8E-5237 [2] RACE-THRUST  
15. 7L-3326 [1] BEARING-THRUST  
16. 9N-1545 [2] RACE-THRUST  
17. 3S-8022 [1] BEARING-THRUST  
18. 4P-1379 [1] RING-GUIDE  
  6V-5135 [2] SETSCREW-SOCKET  
19. 4P-1348 [1] CAMSHAFT-FUEL PUMP  
20. 8N-9371 [1] COVER  
21. 4F-7957 [4] BOLT  
22. 8J-4351 [2] SEAL-O-RING  
23. 113-7794 [6] BUSHING  
24. 3J-7354 [2] SEAL-O-RING  
25. 144-0482 [1] GASKET  
26. 7W-0683 [1] COVER-GALLERY  
27. 0S-1615 [14] BOLT  
28. 9S-4182 [2] PLUG  
29. 131-3719 [6] SEAL-O-RING  
30. 108-6633 Y [6] PUMP GP-FUEL INJECTION  
31. 109-3206 [1] SEAL-O-RING  
32. 9S-8003 [1] PLUG-O-RING  
33. 5P-7813 [2] SEAL-O-RING  
34. 9S-8007 [2] PLUG-O-RING  
35. 7E-6011 [6] LIFTER AS  
36. 7E-9907 [6] SPACER-FUEL PUMP TIMING  
37. 1W-5785 [1] COVER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP14360621
 

4P-1385: PUMP GP-FUEL INJECTION

4P1385 PUMP GP-FUEL INJECTION
TYPE 1. 7E6006-PAGE 166F.01
PART OF 2W8030, 2W8543, 2W9103, & 4P0667 FUEL INJECTION PUMPS
c508210 SEBP1436
4P1385 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-5887 [1] HOUSING AS-FUEL PUMP  
2. 4F-2099 [1] DOWEL  
3. 1S-1953 [1] BEARING-RACK  
4. 7E-6002 [1] BEARING-SLEEVE  
5. 7E-6003 [1] BEARING-SLEEVE  
6. 7E-6004 [1] BEARING-SLEEVE  
7. 8N-0654 [6] DOWEL  
8. 1W-3285 [1] BEARING-RACK  
9. 8N-3731 [6] PIN-LIFTER GUIDE  
10. 3H-0442 [6] SEAL-O-RING  
11. 8N-9367 [1] RACK-REGULATOR  
12. 9S-8001 [1] PLUG-O-RING  
13. 4J-7533 [1] SEAL-O-RING  
14. 8E-5237 [2] RACE-THRUST  
15. 7L-3326 [1] BEARING-THRUST  
16. 9N-1545 [2] RACE-THRUST  
17. 3S-8022 [1] BEARING-THRUST  
18. 4P-1379 [1] RING-GUIDE  
  6V-5135 [2] SETSCREW-SOCKET  
19. 4P-1347 [1] CAMSHAFT-FUEL PUMP  
20. 8N-9371 [1] COVER  
21. 4F-7957 [4] BOLT  
22. 1H-9696 [2] SEAL-O-RING  
23. 4P-2899 [6] BUSHING  
24. 3J-7354 [2] SEAL-O-RING  
25. 8N-9374 [1] GASKET  
26. 7W-0683 [1] COVER-GALLERY  
27. 0S-1615 [14] BOLT  
28. 9S-4182 [2] PLUG  
29. 7E-4847 [6] SEAL-O-RING  
30. 7E-6006 Y [6] PUMP GP-FUEL INJECTION  
31. 1J-9671 [1] SEAL-O-RING  
32. 9S-8003 [1] PLUG-O-RING  
33. 7J-0204 [2] SEAL-O-RING  
34. 9S-8007 [2] PLUG-O-RING  
35. 7E-6011 [6] LIFTER AS  
36. 7E-9907 [6] SPACER-FUEL PUMP TIMING  
37. 1W-5785 [1] COVER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP14360622
 

4P-1385: PUMP GP-FUEL INJECTION

4P1385 PUMP GP-FUEL INJECTION
TYPE 2. 4P7681-PAGE 166F.01
PART OF 2W8030, 2W8543, 2W9103, & 4P0667 FUEL INJECTION PUMPS
c574329 SEBP1436
4P1385 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-5887 [1] HOUSING AS-FUEL PUMP  
2. 4F-2099 [1] DOWEL  
3. 1S-1953 [1] BEARING-RACK  
4. 7E-6002 [1] BEARING-SLEEVE  
5. 7E-6003 [1] BEARING-SLEEVE  
6. 7E-6004 [1] BEARING-SLEEVE  
7. 8N-0654 [6] DOWEL  
8. 1W-3285 [1] BEARING-RACK  
9. 8N-3731 [6] PIN-LIFTER GUIDE  
10. 3H-0442 [6] SEAL-O-RING  
11. 8N-9367 [1] RACK-REGULATOR  
12. 9S-8001 [1] PLUG-O-RING  
13. 4J-7533 [1] SEAL-O-RING  
14. 8E-5237 [2] RACE-THRUST  
15. 7L-3326 [1] BEARING-THRUST  
16. 9N-1545 [2] RACE-THRUST  
17. 3S-8022 [1] BEARING-THRUST  
18. 4P-1379 [1] RING-GUIDE  
19. 4P-1347 [1] CAMSHAFT-FUEL PUMP  
20. 8N-9371 [1] COVER  
21. 4F-7957 [4] BOLT  
22. 1H-9696 [2] SEAL-O-RING  
23. 4P-2899 [6] BUSHING  
24. 3J-7354 [2] SEAL-O-RING  
25. 8N-9374 [1] GASKET  
26. 7W-0683 [1] COVER-GALLERY  
27. 0S-1615 [14] BOLT  
28. 9S-4182 [2] PLUG  
29. 7E-4847 [6] SEAL-O-RING  
30. 4P-7681 CY [6] PUMP GP-FUEL INJECTION  
31. 1J-9671 [1] SEAL-O-RING  
32. 9S-8003 [1] PLUG-O-RING  
33. 7J-0204 [2] SEAL-O-RING  
34. 9S-8007 [2] PLUG-O-RING  
35. 7E-6011 [6] LIFTER AS  
36. 7E-9907 [6] SPACER-FUEL PUMP TIMING  
37. 1W-5785 [1] COVER  
38. 6V-5135 [2] SETSCREW-SOCKET  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14360623
 

7E-0257: PUMP GP-GOV & FUEL INJ

7E0257 GOVERNOR & FUEL INJECTION PUMP GP
S/N 2WB11415-UP
2W6660-PAGE 167.01, 9Y1234-PAGE 153
2W8576-PAGE 168, 4P1381-PAGE 164.03
c501811 SEBP1436
7E0257 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-1381 CY [1] PUMP GP-FUEL INJECTION  
2. 2W-8576 Y [1] GOVERNOR GP  
3. 8N-3799 [1] COVER-FUEL RATIO  
4. 2W-5447 [1] GASKET  
5. 2W-5448 [1] COVER  
6. 8N-9382 [1] GASKET  
7. 9Y-1234 Y [1] FASTENER GP  
8. 8J-8343 [1] SEAL-O-RING  
9. 8M-8515 [1] SEAL-O-RING  
10. 9S-4180 [1] PLUG-O-RING  
11. 4J-7533 [1] SEAL-O-RING  
12. 5P-6620 [1] SEAL-O-RING  
13. 033-5879 [1] SEAL-O-RING  
14. 4W-8915 [1] SPRING-GOVERNOR  
15. 5H-6552 [1] SETSCREW-SOCKET  
16. 8L-5832 [1] NUT-HEX  
17. 2W-6660 Y [1] TORQUE CONTROL GP  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14360624
 

2W-8543: PUMP GP-GOV & FUEL INJ

2W8543 PUMP GP-GOVERNOR & FUEL INJECTION
TYPE 1. S/N 2WB1-6141
2W6972-PAGE 163, 2W6312-PAGE 167 & 2W8576-PAGE 168
c322490 SEBP1436
2W8543 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-6972 Y [1] PUMP GP-FUEL INJECTION  
2. 1W-3151 [1] ELBOW  
3. 1W-3153 [1] ORIFICE  
4. 3J-1907 [1] SEAL  
5. 8N-9382 [1] GASKET  
6. 6V-5894 C [2] BOLT  
7. 5F-0304 [2] PLUG-DRAIN  
8. 1V-6341 [2] SEAL  
9. 2W-8576 Y [1] GOVERNOR GP  
10. 8N-3799 [1] COVER-FUEL RATIO  
11. 5B-7040 [2] BOLT  
12. 2W-5447 [1] GASKET  
13. 2W-5448 [1] COVER  
14. 4F-7957 [2] BOLT  
   
15. 2W-6312 Y [1] TORQUE CONTROL GP  
16. 033-5879 [1] SEAL-O-RING  
17. 1B-2716 [2] BOLT  
18. 3L-6768 [1] SEAL-O-RING  
19. 8S-4710 [4] BOLT  
20. 7B-2742 [2] BOLT  
21. 5P-5601 [1] SEAL-O-RING  
22. 9S-4180 [1] PLUG-O-RING  
23. 4J-7533 [1] SEAL-O-RING  
24. 5P-6620 [1] SEAL-O-RING  
25. 8N-9599 C [1] SPRING-GOVERNOR  
26. 8F-8178 [1] BOLT  
27. 8B-2377 [1] BOLT  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14360625
 

2W-8543: PUMP GP-GOV & FUEL INJ

2W8543 PUMP GP-GOVERNOR & FUEL INJECTION
TYPE 2. S/N 2WB1-6141
2W6972-PAGE 163, 2W8576-PAGE 168 & 2W6660-PAGE 167.01
c407640 SEBP1436
2W8543 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-6972 Y [1] PUMP GP-FUEL INJECTION  
2. 1W-3151 [1] ELBOW  
3. 1W-3153 [1] ORIFICE  
4. 3J-1907 [1] SEAL  
5. 8N-9382 [1] GASKET  
6. 6V-5894 [2] BOLT  
7. 7N-5334 C [1] SETSCREW-SOCKET  
8. 4B-2049 C [1] NUT  
9. 2W-8576 Y [1] GOVERNOR GP  
10. 8N-3799 [1] COVER-FUEL RATIO  
11. 5B-7040 [2] BOLT  
12. 2W-5447 [1] GASKET  
13. 2W-5448 [1] COVER  
14. 4F-7957 [2] BOLT  
15. 2W-6660 YC [1] TORQUE CONTROL GP  
16. 033-5879 [1] SEAL-O-RING  
17. 1B-2716 [2] BOLT  
18. 8J-8343 C [1] SEAL-O-RING  
19. 8S-4710 [4] BOLT  
20. 7B-2742 [2] BOLT  
21. 8M-8515 C [1] SEAL-O-RING  
22. 9S-4180 [1] PLUG-O-RING  
23. 4J-7533 [1] SEAL-O-RING  
24. 5P-6620 [1] SEAL-O-RING  
25. 4W-8915 C [1] SPRING-GOVERNOR  
26. 8F-8178 [1] BOLT  
27. 8B-2377 [1] BOLT  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14360626
 

2W-8543: PUMP GP-GOV & FUEL INJ

2W8543 GOVERNOR & FUEL INJECTION PUMP GP
S/N 2WB6142-7564
2W6972-PAGE 163, 2W8576-PAGE 168, 2W6660-PAGE 167.01 &
9Y1234-PAGE 153
c466356 SEBP1436
2W8543 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-6972 Y [1] PUMP GP-FUEL INJECTION  
2. 2W-8576 Y [1] GOVERNOR GP  
3. 8N-3799 [1] COVER-FUEL RATIO  
4. 2W-5447 [1] GASKET  
5. 2W-5448 [1] COVER  
6. 8N-9382 [1] GASKET  
7. 9Y-1234 CY [1] FASTENER GP  
8. 8J-8343 [1] SEAL-O-RING  
9. 8M-8515 [1] SEAL-O-RING  
10. 9S-4180 [1] PLUG-O-RING  
11. 4J-7533 [1] SEAL-O-RING  
12. 5P-6620 [1] SEAL-O-RING  
13. 033-5879 [1] SEAL-O-RING  
14. 4W-8915 [1] SPRING-GOVERNOR  
15. 5H-6552 C [1] SETSCREW-SOCKET  
16. 8L-5832 C [1] NUT-HEX  
17. 2W-6660 Y [1] TORQUE CONTROL GP  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14360627
 

2W-8543: PUMP GP-GOV & FUEL INJ

2W8543 GOVERNOR & FUEL INJECTION PUMP GP
S/N 2WB7565-8181
2W8576-PAGE 168, 2W6660-PAGE 167.01
9Y1234-PAGE 153, 7E7267-PAGE 163.01
c501743 SEBP1436
2W8543 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-7267 Y [1] PUMP GP-FUEL INJECTION  
2. 2W-8576 Y [1] GOVERNOR GP  
3. 8N-3799 [1] COVER-FUEL RATIO  
4. 2W-5447 [1] GASKET  
5. 2W-5448 [1] COVER  
6. 8N-9382 [1] GASKET  
7. 9Y-1234 CY [1] FASTENER GP  
8. 8J-8343 [1] SEAL-O-RING  
9. 8M-8515 [1] SEAL-O-RING  
10. 9S-4180 [1] PLUG-O-RING  
11. 4J-7533 [1] SEAL-O-RING  
12. 5P-6620 [1] SEAL-O-RING  
13. 033-5879 [1] SEAL-O-RING  
14. 4W-8915 [1] SPRING-GOVERNOR  
15. 5H-6552 C [1] SETSCREW-SOCKET  
16. 8L-5832 C [1] NUT-HEX  
17. 2W-6660 Y [1] TORQUE CONTROL GP  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14360628
 

2W-8543: PUMP GP-GOV & FUEL INJ

2W8543 GOVERNOR & FUEL INJECTION PUMP GP
S/N 2WB8182-UP
2W8576-PAGE 168, 2W6660-PAGE 167.01
9Y1234-PAGE 153, 4P1385-PAGE 164.04.01
c501744 SEBP1436
2W8543 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-1385 Y [1] PUMP GP-FUEL INJECTION  
2. 2W-8576 Y [1] GOVERNOR GP  
3. 8N-3799 [1] COVER-FUEL RATIO  
4. 2W-5447 [1] GASKET  
5. 2W-5448 [1] COVER  
6. 8N-9382 [1] GASKET  
7. 9Y-1234 CY [1] FASTENER GP  
8. 8J-8343 [1] SEAL-O-RING  
9. 8M-8515 [1] SEAL-O-RING  
10. 9S-4180 [1] PLUG-O-RING  
11. 4J-7533 [1] SEAL-O-RING  
12. 5P-6620 [1] SEAL-O-RING  
13. 033-5879 [1] SEAL-O-RING  
14. 4W-8915 [1] SPRING-GOVERNOR  
15. 5H-6552 C [1] SETSCREW-SOCKET  
16. 8L-5832 C [1] NUT-HEX  
17. 2W-6660 Y [1] TORQUE CONTROL GP  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14360629
 

4P-0667: PUMP GP-GOV & FUEL INJ

4P0667 GOVERNOR & FUEL INJECTION PUMP GP
S/N 2WB8192-9233
2W6660-PAGE 167.01, 9Y1234-PAGE 153
2W8576-PAGE 169B, 7E7267-PAGE 163.01
c501745 SEBP1436
4P0667 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3406B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-7267 Y [1] PUMP GP-FUEL INJECTION  
2. 2W-8576 Y [1] GOVERNOR GP  
3. 8N-3799 [1] COVER-FUEL RATIO  
4. 7E-6785 [1] GASKET  
5. 2W-5448 [1] COVER  
6. 8N-9382 [1] GASKET  
7. 9Y-1234 Y [1] FASTENER GP  
8. 8J-8343 [1] SEAL-O-RING  
9. 8M-8515 [1] SEAL-O-RING  
10. 9S-4180 [1] PLUG-O-RING  
11. 4J-7533 [1] SEAL-O-RING  
12. 5P-6620 [1] SEAL-O-RING  
13. 033-5879 [1] SEAL-O-RING  
14. 8N-9599 [1] SPRING-GOVERNOR  
15. 5H-6552 [1] SETSCREW-SOCKET  
16. 8L-5832 [1] NUT-HEX  
17. 2W-6660 Y [1] TORQUE CONTROL GP  
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Use New Adapter To Make Tests Of 9L6884 Nozzles
1979/05/09
Improvements To Optional Modification Of 5P4150 Nozzle Tester
1981/08/26
Explanation Of Differences In Timing Advance Information
1981/08/26
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
Service Information For Woodward Governors
1983/10/26
New Valve Lifter Assemblies Used In Valve Mechanism Groups
1983/11/30
Overvoltage Protection For Woodward 2301 Governor
1984/04/11
New Valve Assembly And Seal Used In Fuel Transfer Pump
1984/05/16
New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used
1984/10/24
Bonnet Of Fuel Injection Pump Group Now Serviced Separately
1984/12/12
Fill Oil Sump Before Installing Woodward Governor
1985/01/16
New Tools Available To Service Fuel Injection Nozzles And Adapters
1985/01/16
Over Fueling Spring No Longer Used In Governor
1985/03/01
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01
Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced
1985/05/01
Thread Lock Now Used On Timing Advance Bolts
1985/08/01
Eliminating Interference Between Governor Housing And Tachometer Drive
1985/08/01
Location Of 6V5135 Setscrews In Fuel Pump Group
1985/08/01
Special Instruction Available To Salvage Governor Housing
1985/08/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Fuel Transfer Pump Improved
1985/11/01
Check Fuel Injection Replacement Pump Installation
1985/11/01
Special Bolts Help Prevent Unauthorized Modification Of Fuel System And Governor Settings
1985/12/01
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
FT Tooling Prints Available For Bushing Installation In Governor Housing
1986/05/01
More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
New Material Used For Disc In Valve Assemblies In Fuel Transfer Pump Groups
1986/09/01
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed
1986/10/01
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles
1986/10/01
Improved Retaining Bushing In Fuel Injection Pump
1986/12/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters
1987/10/01
Improved Valve Mechanism Cover Groups
1988/01/01
Governor Actuator Now Installed With Shock Mounting
1988/08/01
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles
1989/03/01
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque
1989/09/01
Governor Control Motor Polarity May Require A Change
1990/11/01
Corrections For Systems Operation, Troubleshooting, And Specifications For 2301 Electric Governors For Generator Set And Industrial Engines, SENR2928-01
1991/05/01
New Speed Setting Clutch Group For 3161 Woodward Governors
1991/06/01
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings
1991/10/01
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings
1992/01/01
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN)
1992/04/01
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks
1992/08/01
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly
1992/09/01
New Bonnet Used In Fuel Injection Pump Group
1993/06/01
Fuel Injection Pump Improvements{1251}
1994/02/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/01
Fuel Injection Nozzle Spray Orifice Plugging{1254}
1994/07/01
New Seals In Pump Fastener Group And Fuel Injection Pump Group Have Improved Heat Set Resistance {1251}
1994/09/01
Pressure Compensated Simple Governor (PSG Governor) Changes From Aluminum To Cast Iron Housing {1264}
1995/04/01
Fuel Injection Pump Barrel Sealing Face Reconditioning{1251}
1996/03/19
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/23
Fuel Injection Pump Bushings Have New Groove Adjacent To Load Ring {1251}
1996/11/01
New O-Ring Seals Used On "Through-Head-Adapter" And "Internal Fuel Lines" In Fuel Injection Lines Groups{1252}
1996/11/01
Improved Bushing O-Ring Seal Available For Injection Pump Groups{1251}
1997/03/01
Improvements Made To Remanufactured 0R-3008 Fuel Transfer Pump{1256}
1997/03/01
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Troubleshooting Engines with Mechanical Unit Injection (MUI) {1000, 1254}
2006/01/02
The Edge Filter Is Now Removed from Fuel Nozzles {1254, 1290}
2007/08/20
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Improved Manufacturing Processes Are Used for Remanufactured Fuel Injector Nozzles That Are Used in Certain Commercial Engines {1251, 1290}
2012/07/06
Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain Commercial Engines {1250, 1251, 1290, 1713}
2013/10/17
Cat® Reman Announces New Fuel Pump, Fuel Ratio Control, and Fuel Injector Options for Certain Engines {1251, 1278}
2014/09/05
Special Instruction
Use of 6V6070 Governor Adjusting Tool Group{1250}
Use of 6V6070 Governor Adjusting Tool Group{1250}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
3406 New Scroll Fuel System (NSFS) Camshaft Plugs{1110}
3406 New Scroll Fuel System (NSFS) Camshaft Plugs{1110}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Service Letter-NACD
The Governor Output Lever Needs To Be Repositioned On Certain 3406B Generator Set Engines
The Governor Output Lever Needs To Be Repositioned On Certain 3406B Generator Set Engines
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Valve Bonnets with Insufficient Hardness
Valve Bonnets with Insufficient Hardness
Specifications
Fuel Injection Lines
3406 & 3406B GENERATOR SET ENGINE
Fuel Injection Nozzle And Adapter (Earlier) (3406B)
3406 & 3406B GENERATOR SET ENGINE
Fuel Injection Nozzle And Adapter (Later) (3406B)
3406 & 3406B GENERATOR SET ENGINE
Fuel Injection Pump (3406B)
3406 & 3406B GENERATOR SET ENGINE
Fuel Injection Pump Housing (3406B)
3406 & 3406B GENERATOR SET ENGINE
Governor and Fuel Pump Drive Group (3406B)
3406 & 3406B GENERATOR SET ENGINE
Fuel Injection Pump Housing (3406)
3406 & 3406B GENERATOR SET ENGINE
Fuel Injection (3406)
3406 & 3406B GENERATOR SET ENGINE
Automatic Timing Advance Unit
3406 & 3406B GENERATOR SET ENGINE
Governor and Fuel Pump Drive Gear (3406)
3406 & 3406B GENERATOR SET ENGINE
Fuel Injection Lines (3406)
3406 & 3406B GENERATOR SET ENGINE
Fuel Injection Lines<BR> (Double Walled)
3400 GENERATOR SET ENGINE ATTACHMENTS
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Fuel Injection Lines
3406B DIESEL ENGINE FOR GENERATOR SETS
Fuel Transfer Pump
3406B DIESEL ENGINE FOR GENERATOR SETS
Fuel Injection Pump Housing And Governor
3406B DIESEL ENGINE FOR GENERATOR SETS
Governor
3406B DIESEL ENGINE FOR GENERATOR SETS
Fuel Injection Pumps
3406B DIESEL ENGINE FOR GENERATOR SETS
Fuel Injection Pump Housing
3406B DIESEL ENGINE FOR GENERATOR SETS
Fuel Injection Line Adapters
3406B DIESEL ENGINE FOR GENERATOR SETS
Rocker Shaft Assemblies And Push Rods
3406B DIESEL ENGINE FOR GENERATOR SETS
Rocker Shaft Assemblies
3406B DIESEL ENGINE FOR GENERATOR SETS
Fuel Injection Nozzles And Adapters
3406B DIESEL ENGINE FOR GENERATOR SETS
Service Magazine
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage{1264}
1984/05/14
New Valve Assembly And Seal Used In Fuel Transfer Pump{1256}
1984/05/14
New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used{1101,1106}
1984/10/29
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Bonnet Of Fuel Injection Pump Group Now Serviced Separately{1251,1250}
1984/12/10
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
New Tools Available To Service Fuel Injection Nozzles And Adapters {0706,1254}
1985/01/14
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Over Fueling Spring No Longer Used In Governor{1264,1250}
1985/02/04
Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced{1254}
1985/03/18
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Extra Injection Nozzle Clamp Helps Prevent Injection Nozzle Damage{1252}
1985/07/15
Eliminating Interference Between Governor Housing And Tachometer Drive{1264,7487}
1985/08/12
Location Of 6V5135 Setscrews In Fuel Pump Group{1250}
1985/08/12
Thread Lock Now Used On Timing Advance Bolts{1272}
1985/08/12
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Fuel Transfer Pump Improved{1256}
1985/10/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Check Fuel Injection Replacement Pump Installation{1251,1253,1257}
1985/10/28
Special Bolts Help Prevent Unauthorized Modification Of Fuel System And Governor Settings{1250,1264,1278,1287}
1985/11/11
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups{1265,1264,1250}
1986/06/02
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved Retaining Bushing In Fuel Injection Pump {1251,1250}
1986/12/01
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Governor Actuator Now Installed With Shock Mounting{1286}
1988/08/22
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
Governor Control Motor Polarity May Require A Change{1265,1408,7556}
1990/10/29
New Speed Setting Clutch Group For 3161 Woodward Governors{1265}
1991/05/20
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings{1253}
1991/09/30
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings{1253}
1992/01/20
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks{1201,1253}
1992/08/31
Major Engine Component Changes{1201,1202,1205,1218,1219,1230,1253,1288,1331}
1992/09/07
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly{1251,1253,1281,1292}
1992/09/21
New Bonnet Used In Fuel Injection Pump Group {1251}
1993/06/14
Camshaft Lobe Surface Finish Improved; Camshaft Drive Gear Installation Procedure {1209,1210,1212}
1993/09/13
Fuel Injection Pump Improvements{1251}
1994/02/07
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14

Caterpillar Parts SIS Catalog 3406B :

PUMP GP-FUEL INJECTION
4P-1383 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1383 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1381 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1381 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1381 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4W-2549 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4W-2547 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4W-2547 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1385 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-1385 PUMP GP-FUEL INJECTION
PUMP GP-GOV & FUEL INJ
7E-0257 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-8543 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-8543 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-8543 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-8543 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-8543 PUMP GP-GOV & FUEL INJ

Truck sale:

1990 CAT 3406B
USD $25,000 
1990 CAT 3406B

Power Generation Enterprises Inc.
North Hollywood, California
1991 CAT 3406B
USD $22,000 
1991 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
1989 CAT 3406B
USD $35,000 
1989 CAT 3406B

Worldwide Power Products LLC
Houston, Texas
1988 CAT 3406B
USD $29,000 
1988 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
CATERPILLAR 3406B 1988
$29,000 USD 
CATERPILLAR 3406B 1988
- MARINE - PROPULSION
RANSOME ENGINE POWER
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.