AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7C-8995 FASTENER GP-FUEL INJ PUMP S/N 6DC444-471 PART OF 1W-8733, 7E-0529 PUMP GP-GOV & FUEL INJ 3204


FUEL SYSTEM
PUMP GP-FUEL INJECTION
FILTER GP-FUEL
GOVERNOR GP
LINES GP-FUEL
LINES GP-FUEL INJECTION

ENGINE - MACHINE 3204 ENGINE - MACHINE 6DC
 3204 Industrial Engine 6DC00001-UP SEBP1443 3204 6DC   (2018)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
CAMSHAFT AS
2W-0262 CAMSHAFT AS
FASTENER GP-FUEL INJ PUMP
7C-8995 FASTENER GP-FUEL INJ PUMP
PUMP GP-FUEL INJECTION
1W-6539 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
1W-6539 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
2W-0263 PUMP GP-FUEL INJECTION
 

#SEBP14430080
 

7C-8995: FASTENER GP-FUEL INJ PUMP

7C-8995 FASTENER GP-FUEL INJ PUMP
S/N 6DC444-471
PART OF 1W-8733, 7E-0529 PUMP GP-GOV & FUEL INJ
i00608353 SEBP1443
7C8995 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 3204 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1761 [4] BOLT (1/4-20X6.5-IN)  
2. 9S-4191 [1] PLUG  
3. 4F-7957 [6] BOLT (1/4-20X0.875-IN)  
4. 2S-7383 [1] BOLT (1/4-20X3.25-IN)  
5. 8F-8178 [2] BOLT (1/4-20X3.25-IN)  
6. 6B-4198 [2] BOLT (1/4-20X4.19-IN)  
7. 8B-2377 [1] BOLT (1/4-20X2-IN)  
8. 0S-1614 [2] BOLT (1/4-20X0.5-IN)  
9. 8B-2377 B [1] BOLT (1/4-20X2-IN)  
  B   USE AS REQUIRED
 

#SEBP14430081
 

1W-5867: FILTER & LINES GP-FUEL

1W-5867 FILTER & LINES GP-FUEL
S/N 7EB1-99999; 6DC1-471
i00196684 SEBP1443
1W5867 FILTER & LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3204 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-1907 [1] SEAL-O-RING  
2. 7J-4026 [1] ELBOW  
3. 1W-4437 [1] TUBE AS  
4. 7N-9519 [1] BASE AS-FUEL FILTER  
5. 6B-4198 [2] BOLT (1/4-20X4.19-IN)  
6. 7N-9520 [1] GASKET  
7. 1R-0750 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
8. 5P-0537 C [3] WASHER-HARD (7.2X14.5X2-MM THK)  
9. 4F-7957 C [1] BOLT (1/4-20X0.875-IN)  
10. 1A-5350 C [1] CLIP  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14430082
 

1W-8730: GOVERNOR GP

1W-8730 GOVERNOR GP
S/N 7EB1-99999; 6DC1-UP
PART OF 4W-0470 PUMP GP-GOV & FUEL INJ
i00354018 SEBP1443
1W8730 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3204 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6D-3897 [1] BOLT (8-32X0.5-IN)  
2. 6L-5897 [2] BOLT (1/4-20X0.875-IN)  
3. 2W-6104 [1] BLOCK AS-STOP  
  2W-6103 [1] DOWEL  
4. 1W-4243 [1] SPRING-BUMPER  
5. 2W-5161 [1] BOLT-LOAD STOP  
6. 8N-3256 [1] COLLAR-LOAD STOP  
7. 4B-2049 [1] NUT (10-32-THD)  
8. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
9. 2W-4118 Y [1] GOVERNOR GP  
10. 1N-3800 [1] SLEEVE-RACK CONTROL  
11. 6N-3504 [1] SEAT-GOVERNOR SPRING  
12. 2W-2216 [1] SPRING-LINK  
13. 2M-7819 [2] RING-RETAINING  
14. 1N-3802 [1] SEAT-SPRING  
15. 8N-2507 [1] PISTON AS-SERVO  
  8N-2505 [1] VALVE-GOVERNOR SERVO  
  7N-7271 [1] LEVER-CONTROL  
  3G-3835 [1] PIN  
16. 1W-4098 [1] PISTON-GOVERNOR SERVO  
17. 8N-3089 [1] SLEEVE  
18. 5P-9757 [1] SEAL-O-RING  
19. 031-0216 [3] BOLT (1/4-20X0.75-IN)  
20. 4N-2953 [1] RING-LOCK  
21. 4N-2927 [2] RACE-THRUST BEARING  
22. 7M-7219 [1] BEARING-THRUST  
23. 8N-2504 [1] RISER-GOVERNOR  
24. 7N-7267 [1] SPRING  
25. 8N-2495 [1] HOUSING AS-GOVERNOR  
  8S-6814 [4] PIN (12.7MM)  
  4F-6024 [2] PIN (8MM)  
26. 8N-2503 [1] ACTUATOR AS-GOVERNOR  
  4N-6408 [1] PISTON AS  
  4N-6407 [1] SPOOL-DASHPOT  
  4N-6406 [1] RING-SPACER  
  4N-6404 [1] RING-RETAINING  
27. 2N-0828 [2] WASHER  
28. 2P-9556 [1] WASHER (1.17X1.5X0.06-IN THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP14430083
 

1W-8730: GOVERNOR GP

1W-8730 GOVERNOR GP
S/N 6DC1-UP
PART OF 1W-8733, 4W-0470, 7E-0529 PUMP GP-GOV & FUEL INJ
i00196399 SEBP1443
1W8730 GOVERNOR GP Parts scheme 1W8730 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3204 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-6523 C [1] PLUG  
2. 8N-3259 C [1] COVER-HIGH IDLE  
  6I-2003 C [1] GASKET  
3. 7N-2594 C [1] SETSCREW-SLOTTED  
  7N-8775 C [1] NUT-HIGH IDLE  
4. 5P-6945 C [2] BOLT (1/4-20X1.125-IN)  
  5P-0537 C [2] WASHER-HARD (7.2X14.5X2-MM THK)  
5. 3J-7354 C [1] SEAL-O-RING  
6. 4N-5485 C [1] BODY-VALVE  
  5F-9144 C [1] SEAL-O-RING  
7. 4N-5484 C [1] VALVE-NEEDLE  
  6H-9691 C [1] SEAL-O-RING  
8. 0S-1616 C [6] BOLT (1/4-20X1-IN)  
9. 151-5226 [1] COVER AS  
10. 138-9507 [1] SEAL-LIP TYPE  
11. 7N-8779 C [1] GASKET-COVER  
12. 3P-0009 C [1] INSULATOR  
13. 1P-2497 C [2] BOLT-HEAD  
  8T-0328 C [2] WASHER-HARD (5.5X10X1-MM THK)  
14. 8N-3258 C [1] COVER-LOAD STOP  
  6I-2004 C [1] GASKET  
15. 7N-8785 [1] SHAFT-PIVOT  
16. 1N-3800 [1] SLEEVE-RACK CONTROL  
17. 6N-3504 [1] SEAT-GOVERNOR SPRING  
18. 2W-2216 [1] SPRING-LINK  
19. 2M-7819 [2] RING-RETAINING  
20. 1N-3802 [1] SEAT-SPRING  
21. 8N-2507 [1] PISTON AS-SERVO  
  8N-2505 [1] VALVE-GOVERNOR SERVO  
  7C-0791 [1] CYLINDER AS  
  7N-7271 [1] LEVER-CONTROL  
  3G-3835 [1] PIN  
22. 1W-4098 [1] PISTON-GOVERNOR SERVO  
23. 7W-0250 [1] SLEEVE  
24. 5P-9757 [1] SEAL-O-RING  
25. 031-0216 [3] BOLT (1/4-20X0.75-IN)  
26. 4N-2953 [1] RING-LOCK  
27. 7E-4892 [2] RACE-THRUST BEARING  
28. 7M-7219 [1] BEARING-THRUST  
29. 4W-6868 [1] RISER-GOVERNOR  
30. 4N-0432 [1] BALL BEARING  
31. 8N-2495 [1] HOUSING AS-GOVERNOR  
  8S-6814 [4] PIN (12.7MM LG)  
  4F-6024 [2] PIN (8MM LG)  
32. 8N-2503 [1] ACTUATOR AS-GOVERNOR  
  4N-6408 [1] PISTON AS  
  4N-6407 [1] SPOOL-DASHPOT  
  4N-6406 [1] RING-SPACER  
33. 4N-6404 [1] RING-RETAINING  
34. 2P-9556 [1] WASHER (1.17X1.5X0.06-IN THK)  
35. 2N-0828 [2] WASHER (SPRING)  
36. 8N-2496 C [1] GASKET-GOVERNOR HOUSING  
37. 7N-7270 C [2] SLEEVE-SPRING  
38. 7N-8821 C [2] RING-RETAINING  
39. 3K-5733 C [1] SPRING  
40. 8N-2501 C [1] HOUSING AS-GOVERNOR  
  7E-5346 C [1] VALVE AS  
  8N-3945 [1] BUSHING-TERMINAL  
41. 8N-2499 C [1] SPRING-GUIDE  
42. 3D-8317 C [1] RING-RETAINING  
43. 4N-0260 C [1] SEAL-LIP TYPE  
44. 2F-2290 C [1] PLUG-CORE  
45. 7N-7267 [1] SPRING  
46. 6D-3897 [1] BOLT (8-32X0.5-IN)  
47. 6L-5897 [2] BOLT (1/4-20X0.875-IN)  
48. 2W-6104 [1] BLOCK AS-STOP  
  2W-6103 [1] DOWEL  
49. 1W-4243 [1] SPRING-BUMPER  
50. 2W-5161 [1] BOLT-LOAD STOP  
51. 8N-3256 [1] COLLAR-LOAD STOP  
52. 8L-5832 C [1] NUT-HEX (10-32-THD)  
53. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
    -OR-
  9Y-4701 C [1] SETSCREW-SOCKET (10-32X1.38-IN)  
54. 7N-8821 [1] RING-RETAINING  
55. 8N-3168 [1] LEVER-THROTTLE  
56. 2W-9305 [2] PLATE-THROTTLE  
57. 2W-6102 [1] LEVER-SPRING SEAT  
58. 7N-2594 [1] SETSCREW-SLOTTED  
  7W-4272 [1] NUT-SEALING (5/16-18-THD)  
59. 7N-2171 [4] RING-RETAINING  
60. 7N-2172 [2] PIN  
61. 8N-3087 [1] STOP-IDLE DETENT  
62. 2W-7400 [1] SPRING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14430084
 

2W-4118: GOVERNOR GP

2W-4118 GOVERNOR GP
S/N 7EB1-99999; 6DC1-UP
PART OF 1W-8730 GOVERNOR GP
i00359031 SEBP1443
2W4118 GOVERNOR GP Parts scheme 2W4118 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3204 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-6523 [1] PLUG-O-RING  
2. 8N-3259 [1] COVER-HIGH IDLE  
  8N-3263 [1] GASKET  
3. 7N-2594 [1] SETSCREW-SLOTTED  
  7N-8775 [1] NUT-HIGH IDLE  
4. 0S-1616 [2] BOLT (1/4-20X1 IN)  
5. 3J-7354 [1] SEAL-O-RING (8.92MM ID)  
6. 4N-5485 [1] BODY-VALVE  
  5F-9144 [1] SEAL-O-RING (7.65MM ID)  
7. 4N-5484 [1] VALVE-NEEDLE  
  6H-9691 [1] SEAL-O-RING (2.9MM ID)  
8. 4F-7957 [6] BOLT (1/4-20X.875IN)  
9. 1W-7867 [1] COVER-CONTROL  
10. 8T-2604 [1] SEAL-LIP  
11. 7N-8779 [1] GASKET-COVER  
12. 3P-0009 [1] INSULATOR-STUD  
13. 1P-2497 [2] BOLT-HEAD  
14. 8N-3258 [1] COVER-LOAD STOP  
  8N-3264 [1] GASKET  
15. 7N-8785 [1] SHAFT-PIVOT  
16. 8N-2496 [1] GASKET-GOVERNOR HOUSING  
17. 7N-7270 [2] SLEEVE-SPRING  
18. 7N-8821 [3] RING-RETAINING  
19. 3K-5733 [1] SPRING  
20. 8N-2501 [1] HOUSING AS-GOVERNOR  
  1P-2298 [1] VALVE AS  
21. 8N-2499 [1] SPRING-GUIDE  
22. 3D-8317 [1] RING-RETAINING  
23. 4N-0260 [1] SEAL-LIP  
24. 2F-2290 [1] PLUG-CORE  
25. 2W-9305 C [2] PLATE-THROTTLE  
26. 4N-0432 [1] BALL BEARING  
27. 7N-2594 [1] SETSCREW-SLOTTED  
  4W-9362 C [1] LOCKNUT  
28. 7N-2171 [4] RING-RETAINING  
29. 7N-2172 [2] PIN  
30. 8N-3087 [1] STOP-IDLE DETENT  
31. 6N-1069 [1] SPRING  
32. 2W-6102 C [1] LEVER-SPRING SEAT  
33. 8N-3168 [1] LEVER-THROTTLE  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14430085
 

1W-8093: LINES GP-FUEL

1W-8093 LINES GP-FUEL
S/N 7EB1-99999; 6DC1-471
i00353573 SEBP1443
1W8093 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3204 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7B-2742 [2] BOLT (1/4-20X1.25-IN)  
2. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
3. 2P-7215 [1] ELBOW  
4. 2P-1279 [1] LOCKNUT (9/16-18-THD)  
5. 030-8142 [1] REDUCER-FLARED  
6. 3R-4437 [1] NUT (9/16-18-THD)  
7. 2P-1314 [1] CONNECTOR  
8. 3J-1907 [1] SEAL-O-RING  
9. 030-7946 [1] ELBOW  
10. 3J-7354 [1] SEAL-O-RING  
11. 1W-8163 [1] LINE AS-FUEL INJECTION  
12. 1W-8162 [1] BRACKET-FUEL LINE  
 

#SEBP14430086
 

1W-1354: LINES GP-FUEL INJECTION

1W-1354 LINES GP-FUEL INJECTION
S/N 7EB1-99999
i00967542 SEBP1443
1W1354 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3204 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-5132 [4] CLAMP-NOZZLE  
2. 1T-0416 [4] BOLT (5/16-18X0.75-IN)  
3. 3P-1156 [2] SEAL-O-RING  
4. 0S-1594 C [4] BOLT (3/8-16X1-IN)  
5. 3S-2713 C [3] NUT-FULL (3/8-24-THD)  
6. 5P-5598 [1] SEAL-O-RING  
7. 8N-7004 C [4] NOZZLE AS-FUEL VALVE  
    (EACH INCLUDES)
8. 9L-9098 [1] SEAL-CARBON STOP  
9. 4W-3914 C [1] WASHER  
10. 2W-1230 [1] SCREW-BUTTON HEAD  
11. 1W-8616 [1] WASHER  
12. 1W-7492 [1] SUPPORT-COOLER  
13. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
14. 0L-1143 [1] BOLT (3/8-16X2.5-IN)  
15. 8F-6575 [4] PLUG-CUP  
16. 1N-3980 [1] PLUG  
17. 7M-7410 [1] PLUG-PIPE  
18. 3P-1155 [1] SEAL-O-RING  
19. 9L-9188 [1] SPRING-VALVE  
20. 5P-8196 M [1] PLUG  
21. 2M-9780 [1] SEAL-O-RING  
22. 6V-6921 C [1] SEAL-RING  
23. 5F-7054 [1] SEAL-O-RING  
24. 2H-3934 [1] SEAL-O-RING  
25. 2H-3932 [1] SEAL-O-RING  
26. 7N-0042 Y [1] LINES GP-FUEL INJECTION  
27. 1W-4927 [1] VALVE-BYPASS  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP14430087
 

1W-1354: LINES GP-FUEL INJECTION

1W-1354 LINES GP-FUEL INJECTION
S/N 6DC1-443
i00355542 SEBP1443
1W1354 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3204 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-5132 [4] CLAMP-NOZZLE  
2. 1T-0416 [4] BOLT (5/16-18X0.75-IN)  
3. 3P-1156 [2] SEAL-O-RING  
4. 0S-1594 [4] BOLT (3/8-16X1-IN)  
5. 3S-2713 [3] NUT-FULL (3/8-24-THD)  
6. 5P-5598 [1] SEAL-O-RING  
7. 4W-7015 C [4] NOZZLE AS  
    (EACH INCLUDES)
8. 9L-9098 [1] SEAL-CARBON STOP  
9. 8T-0659 [1] WASHER  
10. 2W-1230 [1] SCREW-BUTTON HEAD  
11. 4W-6060 C [1] WASHER  
12. 1W-7492 [1] SUPPORT-COOLER  
13. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
14. 0L-1143 [1] BOLT (3/8-16X2.5-IN)  
15. 8F-6575 [4] PLUG-CUP  
16. 1N-3980 [1] PLUG  
17. 7M-7410 [1] PLUG-PIPE  
18. 3P-1155 [1] SEAL-O-RING  
19. 9L-9188 [1] SPRING-VALVE  
20. 5P-8196 M [1] PLUG  
21. 2M-9780 [1] SEAL-O-RING  
22. 6V-6921 [1] SEAL-RING  
23. 5F-7054 [1] SEAL-O-RING  
24. 2H-3934 [1] SEAL-O-RING  
25. 2H-3932 [1] SEAL-O-RING  
26. 7N-0042 Y [1] LINES GP-FUEL INJECTION  
27. 1W-4927 [1] VALVE-BYPASS  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14430088
 

1W-1354: LINES GP-FUEL INJECTION

1W-1354 LINES GP-FUEL INJECTION
S/N 6DC444-471
i00196682 SEBP1443
1W1354 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3204 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-5132 [4] CLAMP-NOZZLE  
2. 1T-0416 [4] BOLT (5/16-18X0.75-IN)  
3. 3P-1156 [2] SEAL-O-RING  
4. 0S-1594 [4] BOLT (3/8-16X1-IN)  
5. 3S-2713 [3] NUT-FULL (3/8-24-THD)  
6. 5P-5598 [1] SEAL-O-RING  
7. 4W-7015 [4] NOZZLE AS  
    (EACH INCLUDES)
  1H-1023 [1] SEAL-O-RING  
8. 9L-9098 [1] SEAL-CARBON STOP  
9. 8T-0659 [1] WASHER  
10. 2W-1230 [1] SCREW-BUTTON HEAD  
11. 4W-6060 [1] WASHER  
12. 1W-7492 [1] SUPPORT-COOLER  
13. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
14. 0L-1143 [1] BOLT (3/8-16X2.5-IN)  
15. 1W-4927 [1] VALVE-BYPASS  
16. 1N-3980 [1] PLUG  
17. 7M-7410 [1] PLUG-PIPE  
18. 3P-1155 [1] SEAL-O-RING  
19. 9L-9188 [1] SPRING-VALVE  
20. 5P-8196 M [1] PLUG  
21. 2M-9780 [1] SEAL-O-RING  
22. 6V-6921 [1] SEAL-RING  
23. 5F-7054 [1] SEAL-O-RING  
24. 2H-3934 [1] SEAL-O-RING  
25. 2H-3932 [1] SEAL-O-RING  
26. 7N-0042 Y [1] LINES GP-FUEL INJECTION  
  M   METRIC PART
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14430089
 

7N-0042: LINES GP-FUEL INJECTION

7N-0042 LINES GP-FUEL INJECTION
S/N 7EB1-99999; 6DC1-471
PART OF 1W-1354 LINES GP-FUEL INJECTION
i00196569 SEBP1443
7N0042 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3204 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-7121 [1] LINE AS-FUEL INJECTION (NO. 1)  
2. 1W-7122 [1] LINE AS-FUEL INJECTION (NO. 2)  
3. 1W-7123 [1] LINE AS-FUEL INJECTION (NO. 3)  
4. 1W-7124 [1] LINE AS-FUEL INJECTION (NO. 4)  
    (EA LINE AS INCL)
5. 8L-2779 [1] SEAL-O-RING  
6. 1W-9168 [3] CLAMP-FUEL LINE (NON-THREADED)  
7. 5P-4939 [3] SCREW-MACHINE (10-24X15.88-IN)  
8. 1W-9169 [3] CLAMP-FUEL LINE (THREADED)  
9. 1W-0942 [4] ADAPTER AS-FUEL INJ  
    (EACH INCLUDES)
10. 3P-0647 C [2] SEAL-O-RING  
11. 1H-1023 [8] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Use 6V4089 Reamer Assembly To Clean Nozzle Bores
1981/05/20
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers
1981/06/03
Explanation Of Differences In Timing Advance Information
1981/08/26
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
Tune-Up Kit And Remanufactured Nozzles Available
1984/09/12
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Check Screen Assembly In Fuel Transfer Pump Inlet If Low Fuel Pressure Is Experienced
1988/01/01
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles
1989/03/01
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque
1989/09/01
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/01
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN)
1992/04/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/01
Different Fuel Filter Available To Help Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/01
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Use Of 6V-4180 Timing Fixture Group To Check Off-Engine Timing Dimension Setting{1251, 0653}
Use Of 6V-4180 Timing Fixture Group To Check Off-Engine Timing Dimension Setting{1251, 0653}
Fuel Transfer Pump Seal and Spacer Replacement{1256}
Fuel Transfer Pump Seal and Spacer Replacement{1256}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Specifications
Fuel Injection Nozzle
3204 Industrial Engines
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Fuel Transfer Pump
3204 Industrial Engines
Fuel Injection Pump Housing And Governor
3204 Industrial Engines
Governor
3204 Industrial Engines
Fuel Injection Pumps
3204 Industrial Engines
Fuel Injection Pump Housing
3204 Industrial Engines
Rocker Shaft Assembly And Push Rods
3204 Industrial Engines
Rocker Shaft Assembly
3204 Industrial Engines
Fuel Injection Nozzles
3204 Industrial Engines
Service Magazine
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/05/18
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Tune-Up Kit And Remanufactured Nozzles Available{1254,1074,1107}
1984/09/03
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Check Screen Assembly In Fuel Transfer Pump Inlet If Low Fuel Pressure Is Experienced{1256}
1987/12/21
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Rebuild Kit For Fuel Transfer Pump{1256}
1993/09/06
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Improved Fuel Pump Bonnet Seal Has Better Heat Resistance {1251}
1994/09/12
Oversize Fuel Pump Drive Idler Shaft Available To Salvage Cylinder Block{1206}
1994/10/03
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Caterpillar Parts SIS Catalog 3204 :

DRIVE GP-TACHOMETER
1W-9010 DRIVE GP-TACHOMETER
CONTROL GP-GOVERNOR
8N-2177 CONTROL GP-GOVERNOR
CAMSHAFT AS
2W-0262 CAMSHAFT AS
MANIFOLD GP-EXHAUST
6N-6085 MANIFOLD GP-EXHAUST
LINES GP-AIR
1W-5054 LINES GP-AIR
PUMP GP-WATER
4N-0660 PUMP GP-WATER
PUMP GP-WATER
4N-0660 PUMP GP-WATER
LINES GP-WATER
4N-0188 LINES GP-WATER
FILTER & LINES GP-FUEL
1W-5867 FILTER & LINES GP-FUEL
GOVERNOR GP
1W-8730 GOVERNOR GP
GOVERNOR GP
1W-8730 GOVERNOR GP
GOVERNOR GP
2W-4118 GOVERNOR GP
LINES GP-FUEL
1W-8093 LINES GP-FUEL
LINES GP-FUEL INJECTION
1W-1354 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
1W-1354 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
1W-1354 LINES GP-FUEL INJECTION

Truck sale:

CAT 3204
USD $6,500 
CAT 3204

JJ Rebuilders
Medley, Florida
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.