AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1W-6539 PUMP GP-FUEL INJECTION S/N 7EB1-UP PART OF 2W-0263 PUMP GP-FUEL INJECTION 3204 ENGINE - MACHINE


FUEL SYSTEM
PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING
FILTER GP-FUEL
PUMP GP-FUEL TRANSFER
GOVERNOR GP

ENGINE - MACHINE 3204 ENGINE - MACHINE 6DC
 3204 Industrial Engine 6DC00001-UP SEBP1443 3204 6DC   (2018)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
CAMSHAFT AS
2W-0262 CAMSHAFT AS
FASTENER GP-FUEL INJ PUMP
7C-8995 FASTENER GP-FUEL INJ PUMP
PUMP GP-FUEL INJECTION
1W-6539 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
1W-6539 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
2W-0263 PUMP GP-FUEL INJECTION
PUMP GP-GOV & FUEL INJ
1W-8733 PUMP GP-GOV & FUEL INJ
 

#SEBP14430090
 

1W-6539: PUMP GP-FUEL INJECTION

1W-6539 PUMP GP-FUEL INJECTION
S/N 7EB1-UP
PART OF 2W-0263 PUMP GP-FUEL INJECTION
i00144994 SEBP1443
1W6539 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3204 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1M-3506 [1] RING-RETAINER  
2. 8N-1415 [1] SPRING-CHECK  
3. 8N-2516 [1] BONNET-VALVE  
4. 8N-1414 [1] CHECK AS-PUMP  
5. 1W-6541 [1] PLUNGER AS  
6. 7N-1067 [1] SPRING-LIFTER  
7. 7N-1415 [1] WASHER-RETAINER  
8. 8H-9299 [1] SCREW-PLUNGER GEAR  
 

#SEBP14430091
 

1W-6539: PUMP GP-FUEL INJECTION

1W-6539 PUMP GP-FUEL INJECTION
S/N 7EB1-99999; 6DC1-471
PART OF 2W-0263 PUMP GP-FUEL INJECTION
i00121989 SEBP1443
1W6539 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3204 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-1927 [1] RING-RETAINING  
2. 8N-1415 [1] SPRING-CHECK  
3. 1W-9171 [1] BONNET-VALVE  
4. 1W-6987 [1] VALVE AS-CHECK (FUEL)  
5. 1W-6541 [1] PLUNGER AS  
6. 7N-1067 [1] SPRING-LIFTER  
7. 7W-2808 [1] WASHER-RETAINING  
8. 7C-5278 C [1] BOLT-PLUNGER GEAR (FUEL PUMP)(12.1MM LG)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14430092
 

2W-0263: PUMP GP-FUEL INJECTION

2W-0263 PUMP GP-FUEL INJECTION
S/N 7EB1-99999; 6DC1-UP
PART OF 1W-8733, 4W-0470, 7E-0529 PUMP GP-GOV & FUEL INJ
i00145978 SEBP1443
2W0263 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3204 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [2] PLUG  
  4J-7533 [2] SEAL-O-RING  
2. 1W-3485 [1] RACK-REGULATOR  
3. 1W-3486 [1] HOUSING GP-FUEL PUMP  
4. 1S-1953 [1] BEARING-RACK  
5. 1W-3285 [1] BEARING-RACK  
6. 4P-8480 [4] PIN-PUMP GUIDE  
7. 7N-7970 [1] BEARING-SLEEVE  
8. 7N-7969 [4] DOWEL  
9. 8N-2518 [1] BEARING-SLEEVE  
10. 7N-1047 [1] COVER-TIMING  
  7N-1046 [1] GASKET-COVER  
11. 1W-6539 Y [4] PUMP GP-FUEL INJECTION  
12. 8N-5117 [4] BUSHING-TERMINAL  
13. 7E-4846 [4] SEAL-O-RING  
14. 4W-6869 [4] SPACER  
15. 2W-0262 Y [1] CAMSHAFT AS  
16. 7N-8421 C [1] RING-RETAINING  
17. 8N-2487 [1] WASHER-THRUST  
18. 8N-2489 [4] LIFTER AS  
19. 0S-1615 [4] BOLT (1/4-20X0.75-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14430093
 

8N-3365: PUMP GP-FUEL PRIMING

8N-3365 PUMP GP-FUEL PRIMING
S/N 7EB1-99999; 6DC1-UP
PART OF 8N-5251 PUMP GP-FUEL PRM & PRIM FILTER
AN ATTACHMENT
i00157299 SEBP1443
8N3365 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3204 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-6350 [1] BASE AS-FUEL FILTER  
1A. 8N-0803 [1] BASE-FILTER  
1B. 7E-5346 [1] VALVE AS (FUEL CHECK)  
1C. 9S-8003 [2] PLUG  
1D. 1J-9671 [2] SEAL-O-RING  
2. 105-2508 [1] PUMP AS-FUEL PRIMING  
3. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
  5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
4. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
  9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
5. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
 

#SEBP14430094
 

8N-5251: PUMP GP-FUEL PRM & PRIM FILTER

8N-5251 PUMP GP-FUEL PRM & PRIM FILTER
S/N 7EB1-99999; 6DC1-UP
AN ATTACHMENT
i00157301 SEBP1443
8N5251 PUMP GP-FUEL PRM & PRIM FILTER Parts scheme
  For full view, you need register

Parts for your 3204 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-3365 Y [1] PUMP GP-FUEL PRIMING  
2. 8H-2807 [1] NUT (3/8-24-THD)  
3. 2J-0157 [1] SEAL-O-RING  
4. 1L-3769 [1] RING-RETAINING  
5. 8H-2778 [1] SEAL-RING (FUEL PRIMING PUMP)  
6. 7H-9678 [1] RETAINER-ELEMENT  
7. 7S-9323 [1] SPRING  
8. 2H-3429 [1] RING-RETAINING  
9. 8H-2810 [1] CASE AS-FILTER  
10. 9M-2341 [1] FILTER ELEMENT-WTR SEP & FUEL (STANDARD EFFICIENCY)(PRIMARY)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP14430095
 

1W-0568: PUMP GP-FUEL TRANSFER

1W-0568 PUMP GP-FUEL TRANSFER
S/N 7EB1-99999
PART OF 2W-4403 PUMP GP-FUEL TRANSFER
i00355296 SEBP1443
1W0568 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 3204 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-7307 [1] HOUSING AS  
2. 1W-0565 [1] RING-RETAINING  
3. 1W-0566 [1] SPRING  
4. 2M-9780 [1] SEAL-O-RING  
5. 030-8195 [1] CONNECTOR  
6. 1W-0057 [1] COVER-TRANSFER PUMP  
7. 4F-7957 [3] BOLT (1/4-20X0.875-IN)  
8. 1W-0563 [1] SPRING  
9. 2W-2534 [2] VALVE AS  
10. 3P-1979 [1] SEAL-O-RING  
11. 7N-6817 [1] PISTON  
12. 7N-6806 [2] SEAL-RECTANGULAR  
13. 7N-9960 [1] PLATE-PUSH  
 

#SEBP14430096
 

1W-0568: PUMP GP-FUEL TRANSFER

1W-0568 PUMP GP-FUEL TRANSFER
S/N 6DC1-471
PART OF 2W-4403 PUMP GP-FUEL TRANSFER
i00196389 SEBP1443
1W0568 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 3204 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-7307 [1] HOUSING AS  
2. 1W-0565 [1] RING-RETAINING  
3. 7W-2324 [1] SPRING-RETAINING  
4. 2M-9780 [1] SEAL-O-RING  
5. 030-8195 [1] CONNECTOR  
6. 1W-0057 [1] COVER-TRANSFER PUMP  
7. 2A-0762 C [3] BOLT (1/4-20X0.625-IN)  
8. 7W-1407 [1] SPRING-PUMP  
9. 7E-2985 C [3] VALVE AS  
10. 3P-1979 [1] SEAL-O-RING  
11. 7N-6817 [1] PISTON  
12. 6I-3185 C [2] SPACER  
13. 7N-9960 [1] PLATE-PUSH  
14. 8L-2746 [1] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  101-2614 [1] KIT-PUMP SEAL  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14430097
 

2W-4403: PUMP GP-FUEL TRANSFER

2W-4403 PUMP GP-FUEL TRANSFER
S/N 7EB1-99999; 6DC1-471
i00196405 SEBP1443
2W4403 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 3204 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-0568 Y [1] PUMP GP-FUEL TRANSFER  
2. 0S-1615 [2] BOLT (1/4-20X0.75-IN)  
3. 4J-8997 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP14430098
 

1W-8733: PUMP GP-GOV & FUEL INJ

1W-8733 PUMP GP-GOV & FUEL INJ
S/N 7EB1-99999
i00967586 SEBP1443
1W8733 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3204 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-4109 [1] LEVER AS  
2. 7N-5334 [1] SETSCREW-SOCKET (25.4-MM LG)  
  4B-2049 [1] NUT (10-32-THD)  
3. 5L-4758 [1] SEAL-O-RING  
4. 2D-6392 [2] SEAL-O-RING  
5. 6M-5062 [1] SEAL-O-RING  
6. 5D-6543 [1] SEAL-O-RING  
7. 4W-0470 Y [1] PUMP GP-GOV & FUEL INJ  
8. 9S-4180 [1] PLUG  
9. 7N-2176 [1] PIN-DETENT  
  7N-1052 [1] DOWEL  
10. 8N-3093 [1] SPRING-DETENT  
11. 8N-3088 [1] SHAFT AS-THROTTLE  
12. 8N-7276 Y [1] TORQUE CONTROL GP  
13. 9L-3617 [1] SPRING  
14. 2W-5448 [1] COVER  
  2W-5447 [1] GASKET  
15. 0S-1615 [2] BOLT (1/4-20X0.75-IN)  
16. 0S-1616 [2] BOLT (1/4-20X1-IN)  
17. 8N-3799 [1] COVER-FUEL RATIO  
  Y   SEPARATE ILLUSTRATION
 

#SEBP14430099
 

1W-8733: PUMP GP-GOV & FUEL INJ

1W-8733 PUMP GP-GOV & FUEL INJ
S/N 7EB1-99999; 6DC1-UP
i00354066 SEBP1443
1W8733 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3204 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5734 C [1] LEVER AS  
2. 6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  4B-2049 [1] NUT (10-32-THD)  
3. 5P-6620 C [1] SEAL-O-RING  
4. 8J-8343 C [1] SEAL-O-RING  
5. 033-5879 C [1] SEAL-O-RING  
6. 8M-8515 C [1] SEAL-O-RING  
7. 4W-0470 Y [1] PUMP GP-GOV & FUEL INJ  
8. 9S-4180 [1] PLUG  
9. 7N-2176 [1] PIN-DETENT  
  7N-1052 [1] DOWEL  
10. 8N-3093 [1] SPRING-DETENT  
11. 8N-3088 [1] SHAFT AS-THROTTLE  
12. 8N-7276 Y [1] TORQUE CONTROL GP  
13. 7N-5334 [1] SETSCREW-SOCKET (25.4-MM LG)  
  4B-2049 [1] NUT (10-32-THD)  
14. 2W-5448 [1] COVER  
  2W-5447 C [1] GASKET  
15. 4F-7957 [2] BOLT (1/4-20X0.875-IN)  
16. 0S-1616 [2] BOLT (1/4-20X1-IN)  
17. 8N-3799 [1] COVER-FUEL RATIO  
18. 4J-7533 C [1] SEAL-O-RING  
19. 9L-3617 [1] SPRING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Use 6V4089 Reamer Assembly To Clean Nozzle Bores
1981/05/20
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers
1981/06/03
Explanation Of Differences In Timing Advance Information
1981/08/26
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
Tune-Up Kit And Remanufactured Nozzles Available
1984/09/12
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Check Screen Assembly In Fuel Transfer Pump Inlet If Low Fuel Pressure Is Experienced
1988/01/01
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles
1989/03/01
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque
1989/09/01
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/01
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN)
1992/04/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/01
Different Fuel Filter Available To Help Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/01
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Use Of 6V-4180 Timing Fixture Group To Check Off-Engine Timing Dimension Setting{1251, 0653}
Use Of 6V-4180 Timing Fixture Group To Check Off-Engine Timing Dimension Setting{1251, 0653}
Fuel Transfer Pump Seal and Spacer Replacement{1256}
Fuel Transfer Pump Seal and Spacer Replacement{1256}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Specifications
Fuel Injection Nozzle
3204 Industrial Engines
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Fuel Transfer Pump
3204 Industrial Engines
Fuel Injection Pump Housing And Governor
3204 Industrial Engines
Governor
3204 Industrial Engines
Fuel Injection Pumps
3204 Industrial Engines
Fuel Injection Pump Housing
3204 Industrial Engines
Rocker Shaft Assembly And Push Rods
3204 Industrial Engines
Rocker Shaft Assembly
3204 Industrial Engines
Fuel Injection Nozzles
3204 Industrial Engines
Service Magazine
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/05/18
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Tune-Up Kit And Remanufactured Nozzles Available{1254,1074,1107}
1984/09/03
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Check Screen Assembly In Fuel Transfer Pump Inlet If Low Fuel Pressure Is Experienced{1256}
1987/12/21
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Rebuild Kit For Fuel Transfer Pump{1256}
1993/09/06
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Improved Fuel Pump Bonnet Seal Has Better Heat Resistance {1251}
1994/09/12
Oversize Fuel Pump Drive Idler Shaft Available To Salvage Cylinder Block{1206}
1994/10/03
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Caterpillar Parts SIS Catalog 3204 :

LINES GP-FUEL INJECTION
7N-0042 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
1W-1354 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
1W-1354 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
1W-1354 LINES GP-FUEL INJECTION
LINES GP-FUEL
1W-8093 LINES GP-FUEL
GOVERNOR GP
2W-4118 GOVERNOR GP
GOVERNOR GP
1W-8730 GOVERNOR GP
GOVERNOR GP
1W-8730 GOVERNOR GP
PUMP GP-FUEL INJECTION
1W-6539 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
2W-0263 PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING
8N-3365 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRM & PRIM FILTER
8N-5251 PUMP GP-FUEL PRM & PRIM FILTER
PUMP GP-FUEL TRANSFER
1W-0568 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
1W-0568 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
2W-4403 PUMP GP-FUEL TRANSFER
PUMP GP-GOV & FUEL INJ
1W-8733 PUMP GP-GOV & FUEL INJ

Truck sale:

CAT 3204
USD $6,500 
CAT 3204

JJ Rebuilders
Medley, Florida
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.