AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1N3110 GOVERNOR GP-PART 3 OF 3 TYPE 2.S/N 7FB25966-UP & 4MG1-3599.PART OF 1N3111,4W2426,4W2427,4W2428, 4W2429,4W3894,4W3895,4W3896,7W1191,4W9677,4W3897,7W4271, 7W5752,7W5751,7C0692,7C0183,7W8067,7W8555,7C2902,7W7800,7C0691, 7W5353,7W5536, 7W9837 PUMP-GOVERNOR & FUEL INJECTION 3406B


FUEL SYSTEM
GOVERNOR GP
PUMP GP-FUEL INJECTION

TRUCK ENGINE 3406B TRUCK ENGINE 4MG
 3406B TRUCK ENGINE 4MG00001-03599 PACCAR SEBP1447 3406B 4MG   (1987)

FUEL SYSTEM

GOVERNOR GP
GOVERNOR GP
1N-3110 GOVERNOR GP
GOVERNOR GP
1N-3110 GOVERNOR GP
GOVERNOR GP
1N-3110 GOVERNOR GP
DRIVE GP-GOVERNOR & FUEL PUMP
4W-4619 DRIVE GP-GOVERNOR & FUEL PUMP
DRIVE GP-GOVERNOR & FUEL PUMP
4W-4619 DRIVE GP-GOVERNOR & FUEL PUMP
DRIVE GP-GOVERNOR & FUEL PUMP
4W-4619 DRIVE GP-GOVERNOR & FUEL PUMP
 

#SEBP14470600
 

1N-3110: GOVERNOR GP

1N3110 GOVERNOR GP-PART 3 OF 3
TYPE 2.S/N 7FB25966-UP & 4MG1-3599.PART OF 1N3111,4W2426,4W2427,4W2428,
4W2429,4W3894,4W3895,4W3896,7W1191,4W9677,4W3897,7W4271,
7W5752,7W5751,7C0692,7C0183,7W8067,7W8555,7C2902,7W7800,7C0691,
7W5353,7W5536, 7W9837 PUMP-GOVERNOR & FUEL INJECTION
c557396 SEBP1447
1N3110 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-5342 [1] LEVER-SHUT-OFF  
2. 4W-5735 [1] LEVER AS-PIVOT  
3. 6V-6835 [1] SETSCREW-SOCKET  
  4B-2049 [1] NUT  
4. 4W-5734 [1] LEVER AS  
5. 6V-6835 BC [1] SETSCREW-SOCKET  
  8L-5832 BC [1] NUT-HEX  
6. 5H-6552 [1] SETSCREW-SOCKET  
  8L-5832 [1] NUT-HEX  
7. 4N-5621 [1] SHAFT-SHUT-OFF  
8. 0S-1588 [1] BOLT  
9. 8N-3760 [1] COVER  
  8N-3761 [1] GASKET  
  030-9615 [4] SCREW-NYLOK  
10. 7W-7545 C [1] HOUSING AS-GOVERNOR  
  9S-4180 [1] PLUG-O-RING  
  4J-7533 [1] SEAL-O-RING  
11. 8N-2499 [1] GUIDE-SPRING  
12. 3D-8317 [1] RING-RETAINING  
13. 4N-0260 [1] SEAL-LIP TYPE  
14. 8T-2604 [1] SEAL-LIP TYPE  
15. 8N-3945 [1] BUSHING  
16. 4N-5484 [1] VALVE-NEEDLE  
  6H-9691 [1] SEAL-O-RING  
17. 8N-9384 [1] GASKET  
18. 5H-2532 [1] KEY-WOODRUFF  
19. 2W-6102 [1] LEVER-SPRING SEAT  
20. 1W-3962 [1] SPACER  
21. 1W-5337 [1] SHAFT AS-CONTROL  
22. 2M-7819 [1] RING-RETAINING  
23. 2W-0800 [1] LEVER-SHUT-OFF  
24. 2W-0799 [1] SPRING-SHUT-OFF  
25. 2W-0801 [1] SHAFT  
26. 8S-7803 [1] RING-RETAINING  
27. 1W-3961 [1] SPACER  
28. 7W-4182 [1] BODY-VALVE  
  5F-9144 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14470601
 

7L-0007: PUMP GP-FUEL INJECTION

7L0007 FUEL INJECTION PUMP GROUP-TYPE 1
PART OF 4W2429,7W5752,7C0691, 7W5753, 7W4271 & 7W5751 GOVERNOR & FUEL
INJECTION PUMPS
c400032 SEBP1447
7L0007 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-9364 [1] HOUSING AS-FUEL PUMP  
2. 8S-6814 [1] PIN  
3. 1S-1953 [1] BEARING-RACK  
4. 9N-6668 [1] BEARING-SLEEVE  
5. 8N-2648 [1] BEARING-CAMSHAFT  
6. 9N-6667 [1] BEARING-SLEEVE  
7. 8N-0654 [1] DOWEL  
8. 1W-3285 [1] BEARING-RACK  
9. 8N-3731 [6] PIN-LIFTER GUIDE  
10. 3H-0442 [6] SEAL-O-RING  
11. 8N-9367 [1] RACK-REGULATOR  
12. 9S-8001 [1] PLUG-O-RING  
13. 4J-7533 [1] SEAL-O-RING  
14. 7N-7166 [2] RACE-BEARING-THRUST  
15. 7L-3326 [1] BEARING-THRUST  
16. 9J-0114 [2] RACE-THRUST  
17. 7D-1189 [1] BEARING-THRUST  
18. 1W-4874 [1] RING-GUIDE  
19. 7L-0006 [1] CAMSHAFT-FUEL PUMP  
20. 8N-9371 [1] COVER  
21. 4F-7957 [4] BOLT  
22. 1H-9696 [2] SEAL-O-RING  
23. 6V-5135 [4] SETSCREW-SOCKET  
24. 3J-7354 [2] SEAL-O-RING  
25. 8N-9374 [1] GASKET  
26. 8N-9373 [1] COVER-GALLERY  
27. 2A-0762 [14] BOLT  
28. 9S-4182 [2] PLUG  
29. 4D-3107 [6] SEAL-O-RING  
30. 2W-3413 [6] PUMP GP-FUEL INJECTION  
    (EACH INCLUDES)
  2W-3409 C [1] BONNET-VALVE  
31. 1W-6982 [1] VALVE AS-CHECK  
32. 8N-5993 [1] SPRING-FLOW CHECK  
33. 1N-3257 [1] RING-RETAINER  
34. 2W-3414 C [1] PLUNGER & BARREL AS  
35. 1W-0931 [6] LIFTER AS  
36. 8N-0672 [6] SPACER-FUEL PUMP TIMING  
37. 1W-5785 [1] COVER  
38. 9S-8007 [2] PLUG-O-RING  
39. 7J-0204 [2] SEAL-O-RING  
40. 9S-8003 [1] PLUG-O-RING  
41. 1J-9671 [1] SEAL-O-RING  
42. 8N-0656 [6] BUSHING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14470602
 

7L-0007: PUMP GP-FUEL INJECTION

7L0007 FUEL INJECTION PUMP GP-TYPE 2
PART OF 4W2429,7W5752,7C0691, 7W5753 & 7W4271 GOVERNOR & FUEL
INJECTION PUMPS
c400033 SEBP1447
7L0007 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3907 C [1] HOUSING AS-FUEL PUMP  
2. 8S-6814 [1] PIN  
3. 1S-1953 [1] BEARING-RACK  
4. 9N-6668 [1] BEARING-SLEEVE  
5. 8N-2648 [1] BEARING-CAMSHAFT  
6. 9N-6667 [1] BEARING-SLEEVE  
7. 8N-0654 [6] DOWEL  
8. 1W-3285 [1] BEARING-RACK  
9. 8N-3731 [6] PIN-LIFTER GUIDE  
10. 3H-0442 [6] SEAL-O-RING  
11. 8N-9367 [1] RACK-REGULATOR  
12. 9S-8001 [1] PLUG-O-RING  
13. 4J-7533 [1] SEAL-O-RING  
14. 7N-7166 [2] RACE-BEARING-THRUST  
15. 7L-3326 [1] BEARING-THRUST  
16. 9J-0114 [2] RACE-THRUST  
17. 7D-1189 [1] BEARING-THRUST  
18. 1W-4874 [1] RING-GUIDE  
19. 7L-0006 [1] CAMSHAFT-FUEL PUMP  
20. 8N-9371 [1] COVER  
21. 4F-7957 [4] BOLT  
22. 1H-9696 [2] SEAL-O-RING  
23. 6V-5135 [4] SETSCREW-SOCKET  
24. 3J-7354 [2] SEAL-O-RING  
25. 8N-9374 [1] GASKET  
26. 7W-0683 C [1] COVER-GALLERY  
27. 0S-1615 C [14] BOLT  
28. 9S-4182 [2] PLUG  
29. 4D-3107 [6] SEAL-O-RING  
30. 2W-3413 [6] PUMP GP-FUEL INJECTION  
  2W-3409 [1] BONNET-VALVE  
31. 1W-6982 [1] VALVE AS-CHECK  
32. 8N-5993 [1] SPRING-FLOW CHECK  
33. 1N-3257 [1] RING-RETAINER  
34. 2W-3414 C [1] PLUNGER & BARREL AS  
35. 1W-0931 [6] LIFTER AS  
36. 8N-0672 [6] SPACER-FUEL PUMP TIMING  
37. 1W-5785 [1] COVER  
38. 9S-8007 [2] PLUG-O-RING  
39. 7J-0204 [2] SEAL-O-RING  
40. 9S-8003 [1] PLUG-O-RING  
41. 1J-9671 [1] SEAL-O-RING  
42. 8N-0656 [6] BUSHING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14470603
 

7C-3222: PUMP GP-FUEL INJECTION

7C3222 FUEL INJECTION PUMP GP-PART 1 OF 2
PART OF 7W5753, 7W4271, 7W5752, 7C0691,
7W5536, 4W2429 GOVERNOR AND FUEL INJECTION PUMPS
c640319 SEBP1447
7C3222 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3102 [1] CAMSHAFT-FUEL PUMP  
2. 6V-5135 [1] SETSCREW-SOCKET  
3. 1W-4874 [1] RING-GUIDE  
4. 1H-9696 [1] SEAL-O-RING  
5. 1W-5785 [1] COVER  
6. 9S-4182 [2] PLUG  
  3J-7354 [2] SEAL-O-RING  
7. 4F-7957 [2] BOLT  
8. 4P-0987 [1] HOUSING AS-FUEL PUMP  
9. 1W-3285 [1] BEARING-RACK  
10. 4P-7045 [6] DOWEL  
11. 4F-2099 [1] DOWEL  
12. 1S-1953 [1] BEARING-RACK  
13. 4P-0986 [1] BEARING-CAM  
14. 4P-0985 [1] BEARING-CAM  
15. 4P-8480 [6] PIN-PUMP GUIDE  
16. 4P-0984 [1] BEARING-CAM  
17. 9S-8003 [1] PLUG-O-RING  
  1J-9671 [1] SEAL-O-RING  
18. 9J-0114 [2] RACE-THRUST  
19. 7D-1189 [1] BEARING-THRUST  
20. 7C-2568 [1] SCREEN AS  
21. 0S-1615 [14] BOLT  
22. 7W-0683 [1] COVER-GALLERY  
  8N-9374 [1] GASKET  
23. 9S-8001 [1] PLUG-O-RING  
  4J-7533 [1] SEAL-O-RING  
24. 8N-9367 [1] RACK-REGULATOR  
25. 9S-8007 [2] PLUG-O-RING  
  7J-0204 [2] SEAL-O-RING  
26. 8E-5237 [2] RACE-THRUST  
  7L-3326 [1] BEARING-THRUST  
 

#SEBP14470604
 

7C-3222: PUMP GP-FUEL INJECTION

7C3222 FUEL INJECTION PUMP GP-PART 2 OF 2
PART OF 7W5753, 7W4271, 7W5752, 7C0691,
7W5536, 4W2429 GOVERNOR AND FUEL INJECTION PUMPS
c640320 SEBP1447
7C3222 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-0672 [6] SPACER-FUEL PUMP TIMING  
2. 7E-4847 [6] SEAL-O-RING  
3. 7C-6617 C [6] BUSHING-TERMINAL  
4. 4F-7957 [2] BOLT  
5. 8N-9371 [1] COVER  
6. 1H-9696 [1] SEAL-O-RING  
7. 7E-6011 [6] LIFTER AS  
8. 2W-3413 [6] PUMP GP-FUEL INJECTION  
    (EACH INCLUDES)
  2W-3409 [1] BONNET-VALVE  
9. 1N-3257 [1] RING-RETAINER  
10. 1W-6982 [1] VALVE AS-CHECK  
11. 8N-5993 [1] SPRING-FLOW CHECK  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14470605
 

4W-2549: PUMP GP-FUEL INJECTION

4W2549 PUMP GP-FUEL INJECTION
TYPE 1
PART OF 1N3111, 4W2426, 4W2427, 4W3894, 4W3895, 4W3897, 7W1191,
4W9677, 4W3896, 7W9837, 7C0692, 7C0183, 7W8067 PUMP
c339410 SEBP1447
4W2549 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-9364 [1] HOUSING AS-FUEL PUMP  
2. 8S-6814 [1] PIN  
3. 1S-1953 [1] BEARING-RACK  
4. 9N-6668 [1] BEARING-SLEEVE  
5. 8N-2648 [1] BEARING-CAMSHAFT  
6. 9N-6667 [1] BEARING-SLEEVE  
7. 8N-0654 [6] DOWEL  
8. 1W-3285 [1] BEARING-RACK  
9. 8N-3731 [6] PIN-LIFTER GUIDE  
10. 3H-0442 [6] SEAL-O-RING  
11. 8N-9367 [1] RACK-REGULATOR  
12. 9S-8001 [1] PLUG-O-RING  
13. 4J-7533 [1] SEAL-O-RING  
14. 7N-7166 [2] RACE-BEARING-THRUST  
15. 7L-3326 [1] BEARING-THRUST  
16. 9J-0114 [2] RACE-THRUST  
17. 7D-1189 [1] BEARING-THRUST  
18. 1W-4874 [1] RING-GUIDE  
19. 4W-2548 [1] CAMSHAFT-FUEL PUMP  
20. 8N-9371 [1] COVER  
21. 4F-7957 [4] BOLT  
22. 1H-9696 [2] SEAL-O-RING  
23. 6V-5135 [4] SETSCREW-SOCKET  
24. 3J-7354 [2] SEAL-O-RING  
25. 8N-9374 [1] GASKET  
26. 8N-9373 [1] COVER-GALLERY  
27. 2A-0762 [14] BOLT  
28. 9S-4182 [2] PLUG  
29. 4D-3107 [6] SEAL-O-RING  
30. 2W-3413 [6] PUMP GP-FUEL INJECTION  
    (EACH INCLUDES)
  2W-3409 C [1] BONNET-VALVE  
31. 1W-6982 [1] VALVE AS-CHECK  
32. 8N-5993 [1] SPRING-FLOW CHECK  
33. 1N-3257 [1] RING-RETAINER  
34. 8N-0656 [6] BUSHING  
35. 1W-0931 [6] LIFTER AS  
36. 8N-0672 [6] SPACER-FUEL PUMP TIMING  
37. 1W-5785 [1] COVER  
38. 9S-8007 [2] PLUG-O-RING  
39. 7J-0204 [2] SEAL-O-RING  
40. 9S-8003 [1] PLUG-O-RING  
41. 1J-9671 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14470606
 

4W-2549: PUMP GP-FUEL INJECTION

4W2549 PUMP GP-FUEL INJECTION
TYPE 2
PART OF 1N3111, 4W2426, 4W2427, 4W3894, 4W3895, 4W3897, 7W1191,
4W9677, 4W3896, 7W9837, 7C0692, 7C0183, 7W8067 PUMP
c333878 SEBP1447
4W2549 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3907 C [1] HOUSING AS-FUEL PUMP  
2. 4F-2099 [1] DOWEL  
3. 1S-1953 [1] BEARING-RACK  
4. 9N-6668 [1] BEARING-SLEEVE  
5. 8N-2648 [1] BEARING-CAMSHAFT  
6. 9N-6667 [1] BEARING-SLEEVE  
7. 8N-0654 [6] DOWEL  
8. 1W-3285 [1] BEARING-RACK  
9. 8N-3731 [6] PIN-LIFTER GUIDE  
10. 3H-0442 [6] SEAL-O-RING  
11. 8N-9367 [1] RACK-REGULATOR  
12. 9S-8001 [1] PLUG-O-RING  
13. 4J-7533 [1] SEAL-O-RING  
14. 7N-7166 [2] RACE-BEARING-THRUST  
15. 7L-3326 [1] BEARING-THRUST  
16. 9J-0114 [2] RACE-THRUST  
17. 7D-1189 [1] BEARING-THRUST  
18. 1W-4874 [1] RING-GUIDE  
19. 4W-2548 [1] CAMSHAFT-FUEL PUMP  
20. 8N-9371 [1] COVER  
21. 4F-7957 [4] BOLT  
22. 1H-9696 [2] SEAL-O-RING  
23. 6V-5135 [4] SETSCREW-SOCKET  
24. 3J-7354 [2] SEAL-O-RING  
25. 8N-9374 [1] GASKET  
26. 7W-0683 C [1] COVER-GALLERY  
27. 0S-1615 C [14] BOLT  
28. 9S-4182 [2] PLUG  
29. 4D-3107 [6] SEAL-O-RING  
30. 2W-3413 [6] PUMP GP-FUEL INJECTION  
    (EACH INCLUDES)
  2W-3409 C [1] BONNET-VALVE  
31. 1W-6982 [1] VALVE AS-CHECK  
32. 8N-5993 [1] SPRING-FLOW CHECK  
33. 1N-3257 [1] RING-RETAINER  
34. 8N-0656 [6] BUSHING  
35. 1W-0931 [6] LIFTER AS  
36. 8N-0672 [6] SPACER-FUEL PUMP TIMING  
37. 1W-5785 [1] COVER  
38. 9S-8007 [2] PLUG-O-RING  
39. 7J-0204 [2] SEAL-O-RING  
40. 9S-8003 [1] PLUG-O-RING  
41. 1J-9671 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14470607
 

4W-2549: PUMP GP-FUEL INJECTION

4W2549 PUMP GP-FUEL INJECTION
TYPE 3
PART OF 1N3111, 4W3894, 4W3895, 4W3897, 7W1191, 4W9677,
4W3896, 7W9837, 7C0692, 7C0183 & 7W8067 PUMP
c407040 SEBP1447
4W2549 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3907 [1] HOUSING AS-FUEL PUMP  
2. 4F-2099 [1] DOWEL  
3. 1S-1953 [1] BEARING-RACK  
4. 9N-6668 [1] BEARING-SLEEVE  
5. 8N-2648 [1] BEARING-CAMSHAFT  
6. 9N-6667 [1] BEARING-SLEEVE  
7. 8N-0654 [6] DOWEL  
8. 1W-3285 [1] BEARING-RACK  
9. 8N-3731 [6] PIN-LIFTER GUIDE  
10. 3H-0442 [6] SEAL-O-RING  
11. 8N-9367 [1] RACK-REGULATOR  
12. 9S-8001 [1] PLUG-O-RING  
13. 4J-7533 [1] SEAL-O-RING  
14. 7N-7166 [2] RACE-BEARING-THRUST  
15. 7L-3326 [1] BEARING-THRUST  
16. 9J-0114 [2] RACE-THRUST  
17. 7D-1189 [1] BEARING-THRUST  
18. 1W-4874 [1] RING-GUIDE  
19. 7W-3100 [1] CAMSHAFT-FUEL PUMP  
20. 8N-9371 [1] COVER  
21. 4F-7957 [4] BOLT  
22. 1H-9696 [2] SEAL-O-RING  
23. 6V-5135 [2] SETSCREW-SOCKET  
24. 3J-7354 [2] SEAL-O-RING  
25. 8N-9374 [1] GASKET  
26. 7W-0683 [1] COVER-GALLERY  
27. 0S-1615 [14] BOLT  
28. 9S-4182 [2] PLUG  
29. 6V-5393 [6] SEAL-O-RING  
30. 2W-3413 [6] PUMP GP-FUEL INJECTION  
    (EACH INCLUDES)
  2W-3409 [1] BONNET-VALVE  
31. 1W-6982 [1] VALVE AS-CHECK  
32. 8N-5993 [1] SPRING-FLOW CHECK  
33. 1N-3257 [1] RING-RETAINER  
34. 2W-3414 C [1] PLUNGER & BARREL AS  
35. 1W-0931 [6] LIFTER AS  
36. 8N-0672 [6] SPACER-FUEL PUMP TIMING  
37. 1W-5785 [1] COVER  
38. 9S-8007 [2] PLUG-O-RING  
39. 7J-0204 [2] SEAL-O-RING  
40. 9S-8003 [1] PLUG-O-RING  
41. 1J-9671 [1] SEAL-O-RING  
42. 7C-6617 C [6] BUSHING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14470608
 

7C-2616: PUMP GP-FUEL INJECTION

7C2616 PUMP GP-FUEL INJECTION-PART 1 OF 2
PART OF 7C0692, 4W3894, 4W3897, 4W9677, 4W2427, 4W3896, 7W1191,
7C0183, 7W8067, 1N3111 & 7W9837 PUMPS
c345707 SEBP1447
7C2616 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3100 [1] CAMSHAFT-FUEL PUMP  
2. 6V-5135 [1] SETSCREW-SOCKET  
3. 1W-4874 [1] RING-GUIDE  
4. 1H-9696 [1] SEAL-O-RING  
5. 1W-5785 [1] COVER  
6. 9S-4182 [2] PLUG  
  3J-7354 [2] SEAL-O-RING  
7. 4F-7957 [2] BOLT  
8. 7W-3907 [1] HOUSING AS-FUEL PUMP  
9. 1W-3285 [1] BEARING-RACK  
10. 8N-0654 [6] DOWEL  
11. 8S-6814 [1] PIN  
12. 1S-1953 [1] BEARING-RACK  
13. 9N-6668 [1] BEARING-SLEEVE  
14. 8N-2648 [1] BEARING-CAMSHAFT  
15. 8N-3731 [6] PIN-LIFTER GUIDE  
16. 3H-0442 [6] SEAL-O-RING  
17. 9N-6667 [1] BEARING-SLEEVE  
18. 9J-0114 [2] RACE-THRUST  
19. 7D-1189 [1] BEARING-THRUST  
20. 7C-2568 [1] SCREEN AS  
21. 0S-1615 [14] BOLT  
22. 7W-0683 [1] COVER-GALLERY  
  8N-9374 [1] GASKET  
23. 9S-8001 [1] PLUG-O-RING  
  4J-7533 [1] SEAL-O-RING  
24. 8N-9367 [1] RACK-REGULATOR  
25. 9S-8007 [2] PLUG-O-RING  
  7J-0204 [2] SEAL-O-RING  
26. 7N-7166 [2] RACE-BEARING-THRUST  
  7L-3326 [1] BEARING-THRUST  
27. 9S-8003 [1] PLUG-O-RING  
  1J-9671 [1] SEAL-O-RING  
 

#SEBP14470609
 

7C-2616: PUMP GP-FUEL INJECTION

7C2616 PUMP GP-FUEL INJECTION-PART 2 OF 2
PART OF 7C0692, 4W3894, 4W3897, 4W9677, 4W3896, 4W2427, 7C0183,
7W1191, 7W8067, 1N3111 & 7W9837 PUMPS
c496328 SEBP1447
7C2616 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-0672 [6] SPACER-FUEL PUMP TIMING  
2. 131-3719 [6] SEAL-O-RING  
3. 7C-6617 C [6] BUSHING  
4. 4F-7957 [2] BOLT  
5. 8N-9371 [1] COVER  
6. 1H-9696 [1] SEAL-O-RING  
7. 1W-0931 [6] LIFTER AS  
8. 2W-3413 [6] PUMP GP-FUEL INJECTION  
    (EACH INCLUDES)
  2W-3409 [1] BONNET-VALVE  
9. 1N-3257 [1] RING-RETAINER  
10. 1W-6982 [1] VALVE AS-CHECK  
11. 8N-5993 [1] SPRING-FLOW CHECK  
12. 2W-3414 C [1] PLUNGER & BARREL AS  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Truck Engine News
New Springs For Timing Advance Used In Governor And Fuel Pump Drive Group
1982/01/13
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/09/01
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/23
New Valve Assembly And Seal Used In Fuel Transfer Pump
1984/05/23
Bonnet Of Fuel Injection Pump Group Now Serviced Separately
1984/12/17
Governor Flyweight Shield No Longer Used In New Scroll Fuel Systems
1985/01/01
Special Instruction Available To Salvage Governor Housing
1985/07/01
Thread Lock Now Used On Timing Advance Bolts
1985/08/01
Fuel Transfer Pump Improved
1985/10/01
Special Bolts Help Prevent Unauthorized Modification Of Fuel System And Governor Settings
1985/11/01
Check Fuel Injection Replacement Pump Installation
1985/11/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
FT Tooling Prints Available For Bushing Installation In Governor Housing
1986/06/01
New Material Used For Disc In Valve Assemblies In Fuel Transfer Pump Groups
1986/08/01
Orifice Screen Assembly Now Used For The Timing Advance Mechanism
1986/11/01
New Torque Control Group Used In Governor And Fuel Injection Pump Group
1986/12/01
Improved Retaining Bushing In Fuel Injection Pump
1986/12/01
Improved Locknut In Timing Advance On Fuel Pump And Governor Drive Group
1988/07/01
New Valve Assembly And Washer Used In Fuel Transfer Pump Group
1990/01/01
New Valve Assembly And Spacer Used In Fuel Transfer Pump Group
1990/05/01
Fuel Injection Pump Bushing Torque Increased
1991/04/01
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings
1992/01/01
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly.
1992/09/01
3406 Truck Engine Component Update
1992/10/01
Summery Of Changes To Timing Advance Drive Groups
1993/05/01
Fuel Injection Pump Improvements{1251}
1994/01/01
Fuel Injection Pump Improvements{1251}
1994/04/22
Procedure For Lapping Sealing Surfaces Of Fuel Injection Pump Barrels And Bonnets{1251}
1994/06/24
Governors Now Use New Low Mass Weight Carrier{1272}
1995/03/01
Identifying Fuel Injection Pump Check Valves For Compliance With Current Emissions Requirements {1251}
1995/04/01
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting{1278,1287}
1996/01/23
Governor Spring Guide Press Depth{1287,1284}
1996/01/23
Fuel Injection Pump Barrel Sealing Face Reconditioning{1251}
1996/03/27
Fuel Injection Pump Bushings Have New Groove Adjacent To Load Ring {1251}
1996/11/01
Improved Bushing O-Ring Seal Available For Injection Pump Groups{1251}
1997/02/24
Summary Of Changes To Timing Advance Drive Groups (Update){1272}
1997/02/24
Engine News
Improved Bushing O-Ring Seal Available For Injection Pump Groups{1251}
1997/03/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Timing Dimension For Fuel Injection Pumps Changed; 1P7410 Timing Plates Have More Exact Degree Marks
1978/05/03
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Use of 6V6070 Governor Adjusting Tool Group{1250}
Use of 6V6070 Governor Adjusting Tool Group{1250}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation Of 8N3945 Bushing In 8N9679 Governor Housing{1287}
Installation Of 8N3945 Bushing In 8N9679 Governor Housing{1287}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Letter-NACD
The Governor Rack Servo Cylinder Assembly Needs To Be Replaced On Certain 3306B And 3406B Truck Engines
The Governor Rack Servo Cylinder Assembly Needs To Be Replaced On Certain 3306B And 3406B Truck Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Fuel Transfer Pump
3406B DIESEL TRUCK ENGINE
Fuel Injection Pump<BR> Engines With Serial Numbers 7FB1-Up, 4MG1-Up, And 5KJ1-Up
3406B DIESEL TRUCK ENGINE
Fuel Injection Pump<BR> Engines With Serial Numbers 3ZJ1-Up
3406B DIESEL TRUCK ENGINE
Fuel Injection Pump Housing
3406B DIESEL TRUCK ENGINE
Governor
3406B DIESEL TRUCK ENGINE
Governor Control Linkage
3406B DIESEL TRUCK ENGINE
Governor And Fuel Pump Drive Group (Earlier)<BR> (Automatic Timing Advance Unit)
3406B DIESEL TRUCK ENGINE
Governor And Fuel Pump Drive Group (Later)<BR> (Automatic Timing Advance Unit)
3406B DIESEL TRUCK ENGINE
Service Letter-China
The Governor Rack Servo Cylinder Assembly Needs To Be Replaced On Certain 3306B And 3406B Truck Engines
The Governor Rack Servo Cylinder Assembly Needs To Be Replaced On Certain 3306B And 3406B Truck Engines
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Transfer Pump
3406B DIESEL TRUCK ENGINE
Automatic Timing Advance 7FB1-Up, 4MG1-4MG3599
3406B DIESEL TRUCK ENGINE
Fuel Injection Pump Housing And Governor
3406B DIESEL TRUCK ENGINE
Governor
3406B DIESEL TRUCK ENGINE
Fuel Injection Pumps
3406B DIESEL TRUCK ENGINE
Fuel Injection Pump Housing
3406B DIESEL TRUCK ENGINE
Service Magazine
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
New Valve Assembly And Seal Used In Fuel Transfer Pump{1256}
1984/05/14
Bonnet Of Fuel Injection Pump Group Now Serviced Separately{1251,1250}
1984/12/10
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
New Tools Available To Service Fuel Injection Nozzles And Adapters {0706,1254}
1985/01/14
Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced{1254}
1985/03/18
Special Instruction Available To Salvage Governor Housing{1287}
1985/07/15
Thread Lock Now Used On Timing Advance Bolts{1272}
1985/08/12
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Fuel Transfer Pump Improved{1256}
1985/10/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Check Fuel Injection Replacement Pump Installation{1251,1253,1257}
1985/10/28
Special Bolts Help Prevent Unauthorized Modification Of Fuel System And Governor Settings{1250,1264,1278,1287}
1985/11/11
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
FT Tooling Prints Available For Bushing Installation In Governor Housing{0600,1287}
1986/05/05
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Orifice Screen Assembly Now Used For The Timing Advance Mechanism{1251,1272,1288,1292}
1986/10/20
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved Retaining Bushing In Fuel Injection Pump {1251,1250}
1986/12/01
New Torque Control Group Used In Governor And Fuel Injection Pump Group{1264}
1986/12/22
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Separate Grounding Of Throttle Limit Switch And Shutoff Solenoid Improves Component Reliability; New Throttle Limit Switch Used{1269,1155,1400}
1989/07/24
New Valve Assembly And Washer Used In Fuel Transfer Pump Group{1256}
1989/12/25
New Valve Assembly And Spacer Used In Fuel Transfer Pump Group {1256}
1990/05/21
Fuel System Parts Information{1251,1264,1250}
1991/09/02
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings{1253}
1991/09/30
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Fuel Injection Pump Groups Have Larger Diameter Camshaft Bores, New Lifter Assembly, And Shorter Plunger And Barrel Assembly{1251,1253,1281,1292}
1992/09/21
3406 Truck Engine Component Update{1052,1119,1201,1202,1205,1214,1218,1254,1288,1803}
1992/10/26
Summary Of Changes To Timing Advance Drive Groups{1272}
1993/05/24
Fuel Injection Pump Improvements{1251}
1994/02/07

Caterpillar Parts SIS Catalog 3406B :

GOVERNOR GP
1N-3110 GOVERNOR GP
GOVERNOR GP
1N-3110 GOVERNOR GP
GOVERNOR GP
1N-3110 GOVERNOR GP
GOVERNOR GP
1N-3110 GOVERNOR GP
GOVERNOR GP
1N-3110 GOVERNOR GP
GOVERNOR GP
1N-3110 GOVERNOR GP
GOVERNOR GP
1N-3110 GOVERNOR GP
GOVERNOR GP
1N-3110 GOVERNOR GP
PUMP GP-FUEL INJECTION
7L-0007 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7L-0007 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7C-3222 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7C-3222 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4W-2549 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4W-2549 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4W-2549 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7C-2616 PUMP GP-FUEL INJECTION

Truck sale:

1990 CAT 3406B
USD $25,000 
1990 CAT 3406B

Power Generation Enterprises Inc.
North Hollywood, California
1991 CAT 3406B
USD $22,000 
1991 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
1989 CAT 3406B
USD $35,000 
1989 CAT 3406B

Worldwide Power Products LLC
Houston, Texas
1988 CAT 3406B
USD $29,000 
1988 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
CATERPILLAR 3406B 1988
$29,000 USD 
CATERPILLAR 3406B 1988
- MARINE - PROPULSION
RANSOME ENGINE POWER
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.