4W7017 DI FUEL VALVE NOZZLE AS*R S/N 7FB21132-UP & 4MG1-3599 PART OF 4W1566 FUEL INJECTION LINES 3406B



FUEL SYSTEM
LINES GP-FUEL

TRUCK ENGINE 3406B TRUCK ENGINE 4MG
 3406B TRUCK ENGINE 4MG00001-03599 PACCAR SEBP1447 3406B 4MG   (1987)

FUEL SYSTEM

LINES GP-FUEL
LINES GP-FUEL INJECTION
4W-1566 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4W-1566 LINES GP-FUEL INJECTION
NOZZLE AS-FUEL VALVE
4W-7017 NOZZLE AS-FUEL VALVE
LINES GP-FUEL INJECTION
4W-2718 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4W-2718 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4W-2718 LINES GP-FUEL INJECTION
 

#SEBP14470650
 

4W-7017: NOZZLE AS-FUEL VALVE

4W7017 DI FUEL VALVE NOZZLE AS*R
S/N 7FB21132-UP & 4MG1-3599
PART OF 4W1566 FUEL INJECTION LINES
c621820 SEBP1447
4W7017 NOZZLE AS-FUEL VALVE Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 9L-9098 [1] SEAL-CARBON STOP  
2. 7W-4487 [1] WASHER  
3. 9X-2836 M [1] SCREW-BUTTON HEAD  
  114-3364 [1] WASHER (SEALING)  
  M   METRIC PART
 

#SEBP14470651
 

4W-2718: LINES GP-FUEL INJECTION

4W2718 FUEL INJECTION LINES GROUP
SERIAL NO. 7FB1 TO 7FB21131 INCLUSIVE
2W3776 & 2W3777-PAGE 130
c337794 SEBP1447
4W2718 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 2W-3776 Y [1] LINES GP-FUEL INJECTION  
2. 2W-3777 Y [1] LINES GP-FUEL INJECTION  
3. 4N-1292 [6] LOCK-ADAPTER  
4. 4N-1797 [6] ADAPTER AS  
    (EACH INCLUDES)
5. 8M-4437 [1] SEAL-O-RING  
6. 4W-7012 [6] NOZZLE AS-VALVE  
    (EACH INCLUDES)
7. 9L-9098 [1] SEAL-CARBON STOP  
8. 8T-0659 C [1] WASHER-SEALING  
9. 4W-6060 C [1] WASHER  
10. 2W-1230 [1] SCREW-BUTTON HEAD  
11. 7W-1997 [6] CLAMP-DIRECT INJ NOZZLE  
12. 9L-9814 [6] NUT-SELF LOCKING  
13. 4W-9352 C [6] LINE AS-FUEL INJ  
    (EACH INCLUDES)
14. 1H-1023 [1] SEAL-O-RING  
15. 1T-0416 [6] BOLT  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14470652
 

4W-2718: LINES GP-FUEL INJECTION

4W2718 FUEL INJECTION LINES GROUP
SERIAL NO. 7FB21132 TO 7FB47476 INCLUSIVE
2W3776, 2W3777-PAGE 130
c337793 SEBP1447
4W2718 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 2W-3776 Y [1] LINES GP-FUEL INJECTION  
2. 2W-3777 Y [1] LINES GP-FUEL INJECTION  
3. 4N-1292 [6] LOCK-ADAPTER  
4. 4N-1797 [6] ADAPTER AS  
    (EACH INCLUDES)
5. 8M-4437 [1] SEAL-O-RING  
6. 4W-7018 CR [6] NOZZLE AS-FUEL VALVE  
    (EACH INCLUDES)
7. 9L-9098 [1] SEAL-CARBON STOP  
8. 8T-0659 [1] WASHER-SEALING  
9. 7W-4482 [1] WASHER  
10. 2W-1230 [1] SCREW-BUTTON HEAD  
11. 7W-2315 C [6] RETAINER  
12. 9L-9814 [6] NUT-SELF LOCKING  
13. 4W-9352 [6] LINE AS-FUEL INJ  
    (EACH INCLUDES)
14. 1H-1023 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14470653
 

4W-2718: LINES GP-FUEL INJECTION

4W2718 LINES GP-FUEL INJECTION
S/N 7FB47477-58132
7W8627, 7W8628-PAGE 130.01
c345690 SEBP1447
4W2718 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 7W-8627 CY [1] LINES GP-FUEL INJECTION  
2. 7W-8628 CY [1] LINES GP-FUEL INJECTION  
3. 4N-1292 [6] LOCK-ADAPTER  
4. 4N-1797 [6] ADAPTER AS  
    (EACH INCLUDES)
5. 8M-4437 [1] SEAL-O-RING  
6. 4W-7018 R [6] NOZZLE AS-FUEL VALVE  
    (EACH INCLUDES)
7. 9L-9098 [1] SEAL-CARBON STOP  
8. 8T-0659 [1] WASHER-SEALING  
9. 7W-4482 [1] WASHER  
10. 2W-1230 [1] SCREW-BUTTON HEAD  
11. 7W-2315 [6] RETAINER  
12. 9L-9814 [6] NUT-SELF LOCKING  
13. 7W-8629 [6] LINE AS-FUEL INJ  
    (EACH INCLUDES)
14. 1H-1023 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14470654
 

4W-2718: LINES GP-FUEL INJECTION

4W2718 LINES GP-FUEL INJECTION
S/N 7FB58133-71762
4W7018-PAGE 129.01.06, 7C2107 & 7C2108-PAGE 130.02
c401179 SEBP1447
4W2718 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 7C-2107 CY [1] LINES GP-FUEL INJECTION  
2. 7C-2108 CY [1] LINES GP-FUEL INJECTION  
3. 4N-1292 [6] LOCK-ADAPTER  
4. 4N-1797 [6] ADAPTER AS  
    (EACH INCLUDES)
5. 8M-4437 [1] SEAL-O-RING  
6. 4W-7018 CRY [6] NOZZLE AS-FUEL VALVE  
7. 7W-2315 [6] RETAINER  
8. 9L-9814 [6] NUT-SELF LOCKING  
9. 7C-2109 C [6] LINE AS-FUEL INJ  
    (EACH INCLUDES)
  1H-1023 [1] SEAL-O-RING  
10. 8H-9204 C [6] WASHER-FELT  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14470655
 

4W-2718: LINES GP-FUEL INJECTION

4W2718 LINES GP-FUEL INJECTION
S/N 7FB71763-86205
4W7018-PAGE 129.01.06, 7C3418, 7C3428-PAGE 130.03
c401208 SEBP1447
4W2718 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 7C-3418 CY [1] LINES GP-FUEL INJECTION  
2. 7C-3428 CY [1] LINES GP-FUEL INJECTION  
3. 4N-1292 [6] LOCK-ADAPTER  
4. 4N-1797 [6] ADAPTER AS  
    (EACH INCLUDES)
5. 8M-4437 [1] SEAL-O-RING  
6. 4W-7018 RY [6] NOZZLE AS-FUEL VALVE  
7. 7W-2315 [6] RETAINER  
8. 9L-9814 [6] NUT-SELF LOCKING  
9. 7C-3427 C [6] LINE AS-FUEL INJ  
    (EACH INCLUDES)
  1H-1023 [1] SEAL-O-RING  
10. 8H-9204 [6] WASHER-FELT  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14470656
 

4W-2718: LINES GP-FUEL INJECTION

4W2718 LINES GP-FUEL INJECTION
S/N 7FB86206-UP & 4MG1-3599
4W7018-PAGE 129.01.06, 7C9935, 7C9936-PAGE 129.08,
7C9937-PAGE 130.04
c413233 SEBP1447
4W2718 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 7C-9935 Y [1] LINES GP-FUEL INJECTION  
2. 7C-9936 Y [1] LINES GP-FUEL INJECTION  
3. 4N-1292 [6] LOCK-ADAPTER  
4. 4N-1797 [6] ADAPTER AS  
    (EACH INCLUDES)
5. 8M-4437 [1] SEAL-O-RING  
6. 4W-7018 RY [6] NOZZLE AS-FUEL VALVE  
7. 7W-2315 [6] RETAINER  
8. 9L-9814 [6] NUT-SELF LOCKING  
9. 7C-3427 [6] LINE AS-FUEL INJ  
    (EACH INCLUDES)
  1H-1023 [1] SEAL-O-RING  
10. 8H-9204 [6] WASHER-FELT  
11. 7C-9937 Y [1] LINES GP-FUEL INJECTION  
12. 7C-9198 [2] BLOCK  
13. 7C-9200 [1] BRACKET  
14. 7C-9199 [1] BRACKET  
15. 0S-1615 [4] BOLT  
  5P-0537 [4] WASHER  
16. 1A-9579 [2] BOLT  
17. 9M-1974 [4] WASHER  
18. 0S-1618 [2] BOLT  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14470657
 

4W-7018: NOZZLE AS-FUEL VALVE

4W7018 NOZZLE AS-FUEL VALVE*R
S/N 7FB21132-UP & 4MG1-3599
PART OF 4W2718 LINES-FUEL INJECTION
c617919 SEBP1447
4W7018 NOZZLE AS-FUEL VALVE Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 9L-9098 [1] SEAL-CARBON STOP  
2. 7W-4482 [1] WASHER (17.14X9.76X3.18-MM THK)  
3. 271-2489 [1] SEAL-WASHER  
4. 9X-2836 M [1] SCREW-BUTTON HEAD  
5. 114-3362 [1] SEAL-O-RING  
6. 1W-8791 [1] TIP AS-FUEL INJECTOR  
  M   METRIC PART
 

#SEBP14470658
 

7W-5539: LINES GP-FUEL INJECTION

7W5539 FUEL INJECTION LINES GROUP
SERIAL NO. 7FB46617 TO 7FB47476 INCLUSIVE
2W3776, 2W3777-PAGE 130
c337801 SEBP1447
7W5539 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 2W-3776 Y [1] LINES GP-FUEL INJECTION  
2. 2W-3777 Y [1] LINES GP-FUEL INJECTION  
3. 4N-1292 [6] LOCK-ADAPTER  
4. 4N-1797 [6] ADAPTER AS  
    (EACH INCLUDES)
5. 8M-4437 [1] SEAL-O-RING  
6. 4W-7022 R [6] NOZZLE AS-VALVE  
    (EACH INCLUDES)
7. 9L-9098 [1] SEAL-CARBON STOP  
8. 8T-0659 [1] WASHER-SEALING  
9. 7W-4482 [1] WASHER  
10. 2W-1230 [1] SCREW-BUTTON HEAD  
11. 8H-9204 [6] WASHER-FELT  
12. 9L-9814 [6] NUT-SELF LOCKING  
13. 4W-9352 [6] LINE AS-FUEL INJ  
    (EACH INCLUDES)
14. 1H-1023 [1] SEAL-O-RING  
15. 7W-2315 [6] RETAINER  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14470659
 

7W-5539: LINES GP-FUEL INJECTION

7W5539 LINES GP-FUEL INJECTION
SERIAL NO. 7FB47477-58132
7W8627, 7W8628-PAGE 130.01
c345510 SEBP1447
7W5539 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

Pos. Part No Qty Parts name Comments
1. 7W-8627 Y [1] LINES GP-FUEL INJECTION  
2. 7W-8628 Y [1] LINES GP-FUEL INJECTION  
3. 4N-1292 [6] LOCK-ADAPTER  
4. 4N-1797 [6] ADAPTER AS  
    (EACH INCLUDES)
5. 8M-4437 [1] SEAL-O-RING  
   
6. 4W-7022 R [6] NOZZLE AS-VALVE  
    (EACH INCLUDES)
7. 9L-9098 [1] SEAL-CARBON STOP  
8. 8T-0659 [1] WASHER-SEALING  
9. 7W-4482 [1] WASHER  
10. 2W-1230 [1] SCREW-BUTTON HEAD  
11. 8H-9204 [6] WASHER-FELT  
12. 9L-9814 [6] NUT-SELF LOCKING  
13. 7W-8629 [6] LINE AS-FUEL INJ  
    (EACH INCLUDES)
14. 1H-1023 [1] SEAL-O-RING  
15. 7W-2315 [6] RETAINER  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
Do Not Use A Wire Brush On Fuel Nozzles
1982/09/29
New Fuel Nozzle Test Sheet Available
1982/10/27
Bulged Capsule-type Fuel Nozzles
1982/10/27
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/08
New Valve Assembly And Seal Used In Fuel Transfer Pump
1984/05/23
Valve Springs Must Be Removed Before Fuel Injection Nozzle Adapter Assembly Is Removed
1984/06/27
New Fittings Used In Fuel Filter Lines Group
1984/09/26
New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used
1984/11/07
New Tools Available To Service Fuel Injection Nozzles And Adapters
1985/01/01
Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced
1985/03/01
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01
Extra Injection Nozzle Clamp Helps Prevent Injection Nozzle Damage
1985/07/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Service Life Of Oem Primary Fuel Filters
1985/12/01
Gasket Leakage On Aftermarket Fuel Filters
1985/12/01
Bleed Screw Washer (seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
New Material Used For Disc In Valve Assemblies In Fuel Transfer Pump Groups
1986/08/01
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles
1986/10/01
Former Exhaust Valve Bridge For Jacobs Brake ® Interferes With 40 mm Nozzle Adapter; New Bridge Used
1988/04/01
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles
1989/03/01
New Valve Assembly And Washer Used In Fuel Transfer Pump Group
1990/01/01
New Valve Assembly And Spacer Used In Fuel Transfer Pump Group
1990/05/01
Fuel Nozzle Orifice Erosion
1991/08/01
5P7437 Adapter (Part Of 8T5301 Diesel Timing Adapter Group) Must Be Modified To Work On Current Fuel Lines
1992/01/01
New Fuel Line Assemblies And Adapter Assembly Used{1252}
1992/02/01
Identification Of Remanufactured Direct Injection Fuel Nozzles (DlFN)
1992/04/01
3406 Truck Engine Component Update
1992/10/01
Improved 1R-0712 Fuel Filter Available{1261}
1994/03/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles {1254}
1994/05/31
Fuel Injection Nozzle Spray Orifice Plugging{1254}
1994/07/01
Identifying Fuel Injection Pump Check Valves For Compliance With Current Emissions Requirements {1251}
1995/04/01
Shutoff Valve In Fuel Return Lines{1274,1279}
1995/10/01
New O-Ring Seals Used On "Through-Head-Adapter" And "Internal Fuel Lines" In Fuel Injection Lines Groups{1252}
1996/10/01
New Fuel Line Support Brackets Help Eliminate Vibration{1252}
1997/11/18
Engine News
Use New Adapter To Make Tests Of 9L6884 Nozzles
1979/05/09
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Needle Valve May Be Needed To Accurately Measure Engine Return Fuel Flow{1250,0782}
1999/04/01
Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line
1978/07/05
Special Instruction
Installation of 9Y3499 Fuel Line Clamps Parts Kit{1252}
Installation of 9Y3499 Fuel Line Clamps Parts Kit{1252}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Fuel Injection Lines (Earlier)
3406B DIESEL TRUCK ENGINE
Fuel Injection Lines (Later)
3406B DIESEL TRUCK ENGINE
Fuel Injection Nozzle And Adapter (Earlier)
3406B DIESEL TRUCK ENGINE
Fuel Injection Nozzle And Adapter (Later)
3406B DIESEL TRUCK ENGINE
Primary Fuel Filter
3406B DIESEL TRUCK ENGINE
Fuel Filter Base
3406B DIESEL TRUCK ENGINE
Disassembly and Assembly
Fuel Injection Lines
3406B DIESEL TRUCK ENGINE
Fuel Injection Line Adapters
3406B DIESEL TRUCK ENGINE
Fuel Filter And Base
3406B DIESEL TRUCK ENGINE
Fuel Injection Nozzles (Earlier)
3406B DIESEL TRUCK ENGINE
Fuel Injection Nozzle Adapters (Earlier)
3406B DIESEL TRUCK ENGINE
Fuel Injection Nozzles And Adapters (Later)
3406B DIESEL TRUCK ENGINE
Service Magazine
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
New Valve Assembly And Seal Used In Fuel Transfer Pump{1256}
1984/05/14
Valve Springs Must Be Removed Before Fuel Injection Nozzle Adapter Assembly Is Removed{1106}
1984/06/11
New Fittings Used In Fuel Filter Lines Group{1274}
1984/09/17
New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used{1101,1106}
1984/10/29
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
New Tools Available To Service Fuel Injection Nozzles And Adapters {0706,1254}
1985/01/14
Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced{1254}
1985/03/18
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Extra Injection Nozzle Clamp Helps Prevent Injection Nozzle Damage{1252}
1985/07/15
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Special Bolts Help Prevent Unauthorized Modification Of Fuel System And Governor Settings{1250,1264,1278,1287}
1985/11/11
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line{1274}
1978/06/26
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
New Valve Assembly And Washer Used In Fuel Transfer Pump Group{1256}
1989/12/25
New Valve Assembly And Spacer Used In Fuel Transfer Pump Group {1256}
1990/05/21
Fuel Nozzle Orifice Erosion{1254,1250}
1991/09/02
5P7437 Adapter (Part Of 8T5301 Diesel Timing Adapter Group) Must Be Modified To Work On Current Fuel Lines.{0782}
1992/02/03
New Fuel Line Assemblies And Adapter Assembly Used{1252}
1992/02/17
1P8116 O-Ring Seal Available To Service Unit Injectors{1290}
1992/02/24
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
3406 Truck Engine Component Update{1052,1119,1201,1202,1205,1214,1218,1254,1288,1803}
1992/10/26
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26

Caterpillar Parts SIS Catalog 3406B :

LINES GP-FUEL INJECTION
4W-1566 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4W-1566 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4W-1566 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4W-1566 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4W-1566 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4W-1566 LINES GP-FUEL INJECTION
CONTROL GP-FUEL RATIO
7W-2831 CONTROL GP-FUEL RATIO
CONTROL GP-FUEL
4W-6117 CONTROL GP-FUEL
LINES GP-FUEL INJECTION
4W-2718 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4W-2718 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4W-2718 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4W-2718 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4W-2718 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4W-2718 LINES GP-FUEL INJECTION
NOZZLE AS-FUEL VALVE
4W-7018 NOZZLE AS-FUEL VALVE
LINES GP-FUEL INJECTION
7W-5539 LINES GP-FUEL INJECTION

Truck sale:

1990 CAT 3406B
USD $25,000 
1990 CAT 3406B

Power Generation Enterprises Inc.
North Hollywood, California
1991 CAT 3406B
USD $22,000 
1991 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
1989 CAT 3406B
USD $35,000 
1989 CAT 3406B

Worldwide Power Products LLC
Houston, Texas
1988 CAT 3406B
USD $29,000 
1988 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
CATERPILLAR 3406B 1988
$29,000 USD 
CATERPILLAR 3406B 1988
- MARINE - PROPULSION
RANSOME ENGINE POWER
United States