AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9L6669 FAN BELT CHART-PART 2 AN ATTACHMENT 3406B TRUCK ENGINE


BASIC ENGINE
MISCELLANEOUS INFORMATION
BELT TIGHTENER GP
DRIVE GP-FAN
DRIVE GP-AUXILIARY
DRIVE GP-FAN

TRUCK ENGINE 3406B TRUCK ENGINE 4MG
 3406B TRUCK ENGINE - ALL EXCEPT FORD,PACCAR & FREIGHTLINER 4MG00001-03599 SEBP1450 3406B 4MG   (1987)

BASIC ENGINE

MISCELLANEOUS INFORMATION
CHART-FAN BELT
9L-6669 CHART-FAN BELT
CHART-FAN BELT
9L-6669 CHART-FAN BELT
 

#SEBP14500440
 

9L-6669: CHART-FAN BELT

9L6669 FAN BELT CHART-PART 2
AN ATTACHMENT
c312855 SEBP1450
9L6669 CHART-FAN BELT Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    NO SERVICEABLE PARTS
 

#SEBP14500441
 

9N-2112: BELT TIGHTENER GP

9N2112 PULLEY TIGHTENER GROUP
REFER TO CHART SHOWN ON PAGES 42 & 43 FOR USAGE
AN ATTACHMENT
c218527 SEBP1450
9N2112 BELT TIGHTENER GP Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-1915 [1] BOLT  
  7K-3215 [1] BOSS  
2. 5M-2894 [5] WASHER  
3. 4D-9835 C [1] STUD  
  1D-4720 [1] NUT  
  4D-3704 [1] WASHER  
  3R-8530 [1] SPACER  
4. 0T-0055 [1] BOLT  
5. 9N-0316 [1] BRACKET  
6. 5M-1932 [1] STUD  
  1D-4719 [1] NUT  
  2M-0849 [1] WASHER  
7. 0S-1594 [4] BOLT  
8. 9N-0413 [1] COVER  
  9N-1853 [1] GASKET  
9. 0L-1351 [2] BOLT  
10. 5S-2106 [1] SEAL  
11. 9N-0311 [1] SPACER  
12. 9N-1003 [1] PULLEY  
13. 8H-9789 [1] BEARING  
14. 7H-7954 [1] BOLT  
  2F-6262 [1] WASHER  
15. 9N-0318 [1] COVER  
16. 3B-8489 [1] FITTING  
17. 7F-2122 [1] SEAL  
18. 9N-1012 [1] SPACER  
19. 9F-2247 [1] PLUG  
 

#SEBP14500442
 

7W-9005: FASTENER GP-FAN DRIVE

7W9005 FASTENER GROUP
SEBP14500442 SEBP1450
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  5R-1771 [1] BOLT-- FAN DRIVE ADJUSTING  
   
  9S-8752 [1] NUT  
 

#SEBP14500443
 

9N-2113: DRIVE GP-FAN

9N2113 FAN DRIVE GROUP
REFER TO CHART SHOWN ON PAGES 42 & 43 FOR USAGE
AN ATTACHMENT
c496746 SEBP1450
9N2113 DRIVE GP-FAN Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5L-4398 [2] BOLT  
  5P-8245 [2] WASHER  
2. 9N-2111 [1] BRACKET AS  
3. 9N-1262 [1] SHAFT-FAN  
4. 4N-0684 [1] PIN-DOWEL  
5. 9N-2104 [1] PULLEY-FAN  
6. 9N-1012 [1] SPACER-BEARING  
7. 7F-2122 [1] SEAL-O-RING  
8. 8H-9789 [2] BALL BEARING  
9. 9N-2115 [1] ADAPTER-FAN MOUNTING  
10. 1H-5403 [2] BOLT  
11. 3B-8489 [1] FITTING-GREASE  
12. 5S-7264 [1] WASHER-RETAINING  
13. 0S-1588 [6] BOLT  
14. 5S-2106 [1] SEAL-LIP TYPE  
15. 5S-9062 [1] SPACER  
 

#SEBP14500444
 

1W-6411: DRIVE GP-AUXILIARY

1W6411 AUXILIARY DRIVE GROUP-R.H.-FRONT
AN ATTACHMENT
c543996 SEBP1450
1W6411 DRIVE GP-AUXILIARY Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-0321 [1] SHAFT AS-AUX DRIVE  
2. 8H-9789 [1] BALL BEARING  
3. 2W-3638 [1] PULLEY  
4. 1B-7709 [1] BOLT  
5. 6F-6405 B [1] SPACER  
6. 4K-4845 [1] SEAL-LIP TYPE  
7. 0S-1594 [4] BOLT  
8. 5M-2894 [4] WASHER  
9. 1W-6412 [1] HOUSING-AUXILIARY DRIVE  
10. 1H-8278 [1] SEAL-O-RING  
11. 4N-0684 [2] PIN-DOWEL  
  B   USE AS REQUIRED
 

#SEBP14500445
 

9N-2109: DRIVE GP-FAN

9N2109 FAN DRIVE GROUP
REFER TO CHART SHOWN ON PAGES 42 & 43 FOR USAGE
AN ATTACHMENT
c165943 SEBP1450
9N2109 DRIVE GP-FAN Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-1460 [2] BOLT  
  2M-0849 [2] WASHER  
2. 6L-7283 [1] BOLT  
3. 9N-2106 [1] PULLEY  
4. 1A-2029 [2] BOLT  
5. 3B-8489 [1] FITTING  
6. 9N-2107 [1] ADAPTER  
7. 1H-5403 [2] BOLT  
8. 5S-7264 [1] WASHER  
9. 6L-6827 [6] STUD  
10. 7F-2122 [1] SEAL  
11. 9N-1012 [1] SPACER  
12. 8H-9789 [2] BEARING  
13. 5S-2106 [1] SEAL  
14. 5S-9062 [1] SPACER  
15. 9N-2108 [1] BRACKET ASSEM.  
    (Includes)
16. 9N-2317 [1] SHAFT  
17. 4N-0684 [1] DOWEL  
18. 0S-1594 [2] BOLT  
19. 4N-2368 [1] BRACKET  
 

#SEBP14500446
 

9N-2349: DRIVE GP-FAN

9N2349 FAN DRIVE GROUP
REFER TO CHART SHOWN ON PAGES 42 & 43 FOR USAGE
AN ATTACHMENT
c228220 SEBP1450
9N2349 DRIVE GP-FAN Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-1460 [2] BOLT  
  2M-0849 [2] WASHER  
2. 6L-7283 [1] BOLT  
3. 9N-0337 [1] PULLEY  
4. 1A-2029 [2] BOLT  
5. 3B-8489 [1] FITTING  
6. 9N-2107 [1] ADAPTER  
7. 1H-5403 [2] BOLT  
8. 5S-7264 [1] WASHER  
9. 6L-6827 [6] STUD  
10. 7F-2122 [1] SEAL  
11. 9N-1012 [1] SPACER  
12. 8H-9789 [2] BEARING  
13. 5S-2106 [1] SEAL  
14. 5S-9062 [1] SPACER  
15. 9N-2116 [1] BRACKET ASSEM.  
    (Includes)
16. 9N-2317 [1] SHAFT  
17. 4N-0684 [1] DOWEL  
18. 0S-1594 [2] BOLT  
19. 9N-5120 C [1] BRACKET  
20. 5M-2894 C [3] WASHER  
  C   INDICATES CHANGE
 

#SEBP14500447
 

9N-3722: DRIVE GP-FAN

9N3722 FAN DRIVE GROUP-9.625 DIAMETER PULLEY
PROVIDES AN .88:1 FAN RATIO WHEN USED WITH AN 8.50 DIAMETER CRANK PULLEY
AN ATTACHMENT
c228219 SEBP1450
9N3722 DRIVE GP-FAN Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1594 [2] BOLT  
2. 9N-5120 C [1] BRACKET  
3. 5S-9062 [1] SPACER  
4. 9N-2116 [1] BRACKET ASSEM.  
    (Includes)
  4N-0684 [1] PIN  
5. 9N-2317 [1] SHAFT  
6. 9N-1012 [1] SPACER  
7. 7F-2122 [1] SEAL  
8. 5S-7264 [1] WASHER  
9. 9N-3721 [1] ADAPTER  
10. 1H-5403 [2] BOLT  
11. 3B-8489 [1] FITTING  
12. 0S-1571 [6] BOLT  
13. 8H-9789 [2] BEARING  
14. 9N-2881 [1] PULLEY  
15. 5S-2106 [1] SEAL  
16. 5M-2894 C [8] WASHER  
  C   INDICATES CHANGE
 

#SEBP14500448
 

9N-2117: DRIVE GP-FAN

9N2117 FAN DRIVE GROUP
REFER TO CHART SHOWN ON PAGES 42 & 43 FOR USAGE
AN ATTACHMENT
c228221 SEBP1450
9N2117 DRIVE GP-FAN Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-7283 [1] BOLT  
  5M-2894 [1] WASHER  
2. 1A-1460 [2] BOLT  
3. 2M-0849 [2] WASHER  
4. 5S-2106 [1] SEAL  
5. 9N-0337 [1] PULLEY  
6. 1A-2029 [6] BOLT  
7. 8H-9789 [2] BEARING  
8. 3B-8489 [1] FITTING  
9. 1H-5403 [2] BOLT  
  5S-7264 [1] WASHER  
10. 9N-2115 [1] ADAPTER  
11. 9N-1012 [1] SPACER  
12. 7F-2122 [1] SEAL  
13. 5S-9062 [1] SPACER  
14. 9N-2116 [1] BRACKET ASSEM.  
    (Includes)
15. 9N-2317 [1] SHAFT  
16. 4N-0684 C [1] DOWEL  
17. 9N-5120 C [1] BRACKET  
18. 0S-1594 [2] BOLT  
19. 5M-2894 C [2] WASHER  
  C   INDICATES CHANGE
 

#SEBP14500449
 

6N-9311: DRIVE GP-FAN

6N9311 FAN DRIVE GROUP
AN ATTACHMENT
c580582 SEBP1450
6N9311 DRIVE GP-FAN Parts scheme
  For full view, you need register

Parts for your 3406B TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5L-4398 [2] BOLT  
  5P-8245 [2] WASHER  
2. 6L-7283 [1] BOLT  
3. 9N-2106 [1] PULLEY-FAN  
4. 1A-2029 [2] BOLT  
5. 2D-4867 [1] FITTING-HYDRAULIC  
6. 9N-2107 [1] ADAPTER-FAN MOUNTING  
7. 1H-5403 [2] BOLT  
8. 5S-7264 [1] WASHER-RETAINING  
9. 6L-6827 [6] STUD  
10. 7F-2122 [1] SEAL-O-RING  
11. 9N-1012 [1] SPACER-BEARING  
12. 8H-9789 [2] BALL BEARING  
13. 5S-2106 [1] SEAL-LIP TYPE  
14. 5S-9062 [1] SPACER  
15. 9N-2116 [1] BRACKET AS-FAN  
16. 9N-2317 [1] SHAFT-FAN  
17. 4N-0684 [1] PIN-DOWEL  
18. 0S-1594 [2] BOLT  
19. 9N-5120 [1] BRACKET-ADJUSTABLE  
20. 5M-2894 [3] WASHER  
 

Information:

Truck Engine News
Use 6V6035 Hardness Tester On Crankshafts
1982/03/31
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach
1982/05/19
Inspection Marks On Bearings
1982/05/19
Separate Valve Stem Gauges Available
1982/06/23
Make Change To 6V2100 Multitach And 5P9698 Calibrator
1982/12/08
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/08
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves
1982/12/08
Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/12/08
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/08
Engine Valve Stem "use Again " Specifications
1983/03/02
Pistons With Thicker Top Rings Must Be Used In Correct Applications
1983/06/29
New Liner Seat Insert Available
1983/08/31
Parts Service Information For Pistons, Connecting Rods, Piston Pins And Rings
1983/10/05
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/11/23
Reuse Of Engine Bearings
1983/12/21
Crankshaft Failures
1983/12/21
Surface Grinding Of Compacted Graphite Iron Cylinder Heads
1984/09/26
Exhaust Brake Performance Increased
1985/01/01
Install Crankshaft Thrust Bearings Correctly To Avoid Damage
1985/02/01
Use Care When Removing Oil Pan And 9N3167 Plate
1985/02/01
Be Sure Correct Piston Rings Are Used On 3400 Series Engines
1985/05/01
Air Conditioner Compressor Mounting Bracket Improved
1985/06/01
Effects Of Liner Wear In Engines Using Plasma Coated Top Rings
1985/11/01
Crankshaft Seal Usage On 3400 Series Truck Engines
1985/12/01
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System
1985/12/01
New 8T2998 Lubricant Available
1986/02/01
New Cylinder Liner Available
1986/02/01
Stronger Oil Pan Used
1986/03/01
Use Care When Removing Oil Pan And 9N3167 Plate
1986/05/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
New Engine Timing Indicator Group Available
1986/07/01
Prevent Gasket Leakage On 3406B Truck Engines Equipped With Jake Brakes
1986/07/01
Increase Piston Reuse With Keystone Piston Ring Gage Group
1986/07/01
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed
1986/09/01
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity
1986/11/01
High Alloy Cylinder Head Improved
1987/07/01
Silicone Rubber Water Seals Available
1987/07/01
Results Of High Speed And/Or Overspeeding Of 3406B Truck Engines
1987/11/01
Improved Valve Mechanism Cover Groups
1987/12/01
Former Exhaust Valve Bridge For Jacobs Brake ® Interferes With 40 mm Nozzle Adapter; New Bridge Used
1988/04/01
Remanufactured Cylinder Heads For 3406 Engines
1988/04/01
New Crankshaft Damper Has Rubber Bonded To Hub And Ring
1988/06/01
Stronger Oil Pan Available For Severe Applications
1988/08/01
New Liner Seat Insert Available
1988/11/01
Larger Valve Springs Must Be Used With Williams Blue Ox ® 485 kPa (70 psi) Exhaust Brake; New Spring Compressor Group Available
1988/12/01
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips
1989/08/01
Plasma Top Piston Rings Replace Chrome Rings
1989/09/01
Improved Head Gasket Used; Service Tips
1990/02/01
New Valve Lifter Improves Oil Flow To Top Of Engine (improves Compression Brake System Performance)
1990/04/01
Service Tips For Piston Cooling Jets (Tubes)
1990/11/01
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts
1991/01/01
Procedure To Retain Oil Pump When The Cylinder Block Pump Mounting Pad Is Broken
1991/05/01
New Drain Plug And O-ring Seal Used In Oil Pan Groups
1991/05/01
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket
1992/09/01
3406 Truck Engine Component Update
1992/10/01
Cylinder Pack Puller Groups Improved
1992/12/01
Maintenance Tips For 60799 Exhaust Restrictor; Additional Spring Improves Performance Of 60799 Exhaust Restrictor
1993/01/01
Damper Requirements For Remanufactured Short Block
1993/08/01
Flywheel Housing to Cylinder Block Joint Improvements{1157,1201}
1994/01/01
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/22
New Intake And Exhaust Valves Used{1105,1100}
1994/06/24
New Valve Lifter Assembly Provide Improved Lubrication Of Lifter Roller And Camshaft Lobes{1209,1210}
1994/06/24
Remanufactured 3400 Cylinder Heads Now Use Intake And Exhaust Valves With Chrome Plated Valve Stems{1105}
1994/09/01
Impeller Appearance On Remanufactured 3406 Water Pump{1364,1361}
1994/09/01
New Engine Crankshaft Rubber Damper Assembly Uses Improved Rubber Material{1205}
1994/10/01
New Service Repair Camshaft Idler Gear Shafts Available For Use With Cylinder Blocks With Damaged Pilot Bore{1237}
1995/08/01
New Material Used In O-Rings And Optional New Block Side Cover Replacement{1201}
1996/02/26
Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available
1980/09/10
New Piston Pin Bearing Used In Connecting Rod Assembly
1977/04/22
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads
1977/06/29
Tolerance Added To Valve Clearance Specifications
1978/01/18
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Special Instruction
Installation of OR1291 or OR1292 Short Block Group{1200}
Installation of OR1291 or OR1292 Short Block Group{1200}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Service Letter-NACD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Australia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CFEL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CSARL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Americas
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Brazil
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Truck/Ag/Marine
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Technical Information Bulletin
Replacement Procedure:
Replacement Procedure:
0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks
0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Service Letter-China
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Asia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-APD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
Product Support Program For Replacing The Cylinder Kits On Certain 3406B Truck Engines
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
New Spring Needs To Be Installed In The 7E6844 Seal Groups And In The Seal Groups Used In Various 3406 Water Pumps, And Gaskets Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Magazine
Connecting Rod Changes And Replacement Information{1218}
1980/03/03
6V2086 And 6V2087 Seal And Wear Sleeve Installers Available{0622,1160,1161}
1980/09/01
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Parts Service Information For Pistons, Connecting Rods, Piston Pins And Rings{1214,1225,1215,1218}
1983/09/12
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
Repair Of Drain Plug Threads In Oil Pan{1302}
1984/04/23
Salvaging Cylinder Block Top Decks After Liner Seat Erosion{1201,1216,1217}
1984/06/04
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Change To Maintenance Interval For Valve Lash Adjustment{1105,1102}
1984/09/03
New Cylinder Block Groups Used{1201}
1984/10/01
Install Crankshaft Thrust Bearings Correctly To Avoid Damage{1202,1203}
1985/02/11
3406B Truck Engines Have Been Improved For 1985{1000,1050,1052,1100,1200,1250}
1985/03/04
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Be Sure Correct Piston Rings Are Used On 3400 Series Engines{1215,1214}
1985/05/06
Air Conditioner Compressor Mounting Bracket Improved{1802}
1985/05/20
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Inspection And Installation Procedures For Water Pump Shaft And Seals{1361,1389,1373}
1985/06/17
New Oil Seal And Coolant Seal Group Improve Service Life Of Engine Water Pump{1361,1389,1373}
1985/06/17
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Two Different Piston Oil Ring Designs Used{1215}
1985/11/11
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Crankshaft Seal Usage On 3400 Series Engines{1160,1161}
1985/12/16
New Cylinder Liner Available{1201}
1986/02/10
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Adjust Bridge Whenever Valve Clearance Adjustments Are Made{1121,1105,1100}
1986/04/07
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
Service Reminders For 3400 Family Of Diesel Engines{1204,1214,1331}
1986/05/05
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed{1000,1100,1200}
1986/09/08
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Avoid Oil Contact With New Water Passage Seals Used In Cylinder Head Groups{1100}
1986/12/15
Modification To Holder To Machine Counterbore On Cylinder Block{0664,1201}
1977/02/28
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads{0663,1101}
1977/06/20
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Remanufactured Cylinder Heads For 3406 Engines{1100}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Recommendations For Reusability Of Pistons With Crater Rim Cracks{1214}
1987/06/29
New Water Pump Group Used{1361}
1987/06/29
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Temperature Regulator Housing Parts And Water Pump Adapter Have More Resistance To Erosion And Galvanic Corrosion; Guidelines On Grounding Of Electrical System And Cooling System Maintenance {1350,1361,1393,1400}
1987/08/03
Recommendations For Preventing Cooling System Damage {1201}
1987/08/31
Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Crankshaft Damper Has Rubber Bonded To Hub And Ring{1202,1205}
1988/06/13
Piston Application Guide{1214,1215}
1988/06/13
Stronger Oil Pan Available For Severe Applications{1201,1302,1307}
1988/08/08
Self-Locking Bolts Used In Front Timing Gear Group{1206}
1988/10/17
Head Bolt Holes In Cylinder Blocks Can Be Repaired{1201,1101}
1988/10/24
New Liner Seat Insert Available{1201,1216,1217}
1988/11/14
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Wider Connecting Rods Have More Bearing Area{1214,1218}
1979/11/05
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Head Gasket Available; Head Gasket Replacement Guidelines{1124,1216,1221}
1989/01/30
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21
New Connecting Rod Bearing Used{0372,1203,1219}
1989/08/21
Engine Coolant Can Be Recycled{1395}
1989/11/13
Additional Information For Checking Valve Camshaft Timing{1105,1110,1112,1121}
1989/12/11
Improvements Made To Water Pumps; New Groups/Parts Available For Certain Applications{1364,1361}
1990/02/19
Improved Head Gasket Used; Service Tips {1124,1216,1221,7568}
1990/02/26
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Service Tips For Piston Cooling Jets (Tubes){1331}
1990/11/26
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
New Drain Plug And O-ring Seal Used In Oil Pan Groups{1302,7553,7555}
1991/05/06
New Oil Drain Assembly Used; Be Sure To Correctly Tighten Drain Plugs, Port Plugs, And Pipe Plugs In Oil Pans{1302}
1991/06/03
No Gaskets Used With Aluminum Flywheel Housings{1157}
1991/10/14
New Piston Pin Retainer Used{1225}
1991/10/14
New Cylinder Heads Have Additional Coolant Passages{1101,1100}
1992/06/29
3406 Truck Engine Component Update{1052,1119,1201,1202,1205,1214,1218,1254,1288,1803}
1992/10/26
New Liner Seat Inserts Available{1217}
1992/11/09
New Cylinder Head Gasket, Spacer Plate And Head Bolts Used; New Cylinder Liner Projection Measurement Method; New Cylinder Head Torque Sequence{1124,1221,1216}
1992/11/16
Maintenance Tips For 6I0799 Exhaust Restrictor; Additional Spring Improves Performance Of 6I0799 Exhaust Restrictor{1119,1061,1088}
1993/02/08
Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16

Caterpillar Parts SIS Catalog 3406B :

CHART-FAN BELT
9L-6669 CHART-FAN BELT
DAMPER & PULLEY GP
9Y-4876 DAMPER & PULLEY GP
DAMPER & PULLEY GP
9Y-4877 DAMPER & PULLEY GP
DRIVE GP-PUMP
1W-7935 DRIVE GP-PUMP
DAMPER & PULLEY GP
9N-2283 DAMPER & PULLEY GP
DAMPER & PULLEY GP
9N-1375 DAMPER & PULLEY GP
DAMPER & PULLEY GP
1W-4787 DAMPER & PULLEY GP
DRIVE GP-ACCESSORY
8N-9653 DRIVE GP-ACCESSORY
BELT TIGHTENER GP
9N-2112 BELT TIGHTENER GP
7W-9005 FASTENER GP-FAN DRIVE
DRIVE GP-FAN
9N-2113 DRIVE GP-FAN
DRIVE GP-AUXILIARY
1W-6411 DRIVE GP-AUXILIARY
DRIVE GP-FAN
9N-2109 DRIVE GP-FAN
DRIVE GP-FAN
9N-2349 DRIVE GP-FAN
DRIVE GP-FAN
9N-3722 DRIVE GP-FAN
DRIVE GP-FAN
9N-2117 DRIVE GP-FAN

Truck sale:

1990 CAT 3406B
USD $25,000 
1990 CAT 3406B

Power Generation Enterprises Inc.
North Hollywood, California
1991 CAT 3406B
USD $22,000 
1991 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
1989 CAT 3406B
USD $35,000 
1989 CAT 3406B

Worldwide Power Products LLC
Houston, Texas
1988 CAT 3406B
USD $29,000 
1988 CAT 3406B

Ransome CAT
Bensalem, Pennsylvania
CATERPILLAR 3406B 1988
$29,000 USD 
CATERPILLAR 3406B 1988
- MARINE - PROPULSION
RANSOME ENGINE POWER
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.