3306B Industrial Engine 7JB00001-UP SERVICE EQUIPMENT AND SUPPLIES Caterpillar SIS

INDUSTRIAL ENGINE 3306B INDUSTRIAL ENGINE 7JB
3306B Industrial Engine 7JB00001-UP SEBP1451 3306B 7JB (1983)

Parts group 3306B:

For full view, you need register

SERVICE EQUIPMENT AND SUPPLIES

CARTRIDGE KITS

1W-1604 CARTRIDGE GP-TURBOCHARGER

1W-1604 CARTRIDGE GP-TURBOCHARGER
S/N 7JB1210-UP
PART OF 1W-3429, 2W-7277 TURBOCHARGER GP

1W-6865 CARTRIDGE GP-TURBOCHARGER

1W-6865 CARTRIDGE GP-TURBOCHARGER
PART OF 2W-1744, 2W-3214 TURBOCHARGER GP

214-6914 CARTRIDGE GP-TURBOCHARGER

214-6914 CARTRIDGE GP-TURBOCHARGER
S/N 7JB10024-UP
PART OF 219-9710 TURBOCHARGER GP

219-1909 CARTRIDGE GP-TURBOCHARGER

219-1909 CARTRIDGE GP-TURBOCHARGER
S/N 7JB11728-UP
PART OF 219-1911 TURBOCHARGER GP
AN ATTACHMENT

2W-3558 CARTRIDGE GP-TURBOCHARGER

2W-3558 CARTRIDGE GP-TURBOCHARGER
S/N 7JB2222-UP
PART OF 2W-3556 TURBOCHARGER GP

7C-7596 CARTRIDGE GP-TURBOCHARGER

7C-7596 CARTRIDGE GP-TURBOCHARGER
PART OF 7C-7578 TURBOCHARGER GP
AN ATTACHMENT

7C-7598 CARTRIDGE GP-TURBOCHARGER

7C-7598 CARTRIDGE GP-TURBOCHARGER
S/N 7JB2391-UP
PART OF 7C-7582 TURBOCHARGER GP

7N-7750 CARTRIDGE GP-TURBOCHARGER

7N-7750 CARTRIDGE GP-TURBOCHARGER
S/N 7JB1891-UP
PART OF 7N-7748 TURBOCHARGER GP

CHARTS & FILMS

6L-4502 CHART-PLATE & FILM

6L-4502 CHART-PLATE & FILM

FILTERS

110-5268 FILTER GP-ENGINE OIL

110-5268 FILTER GP-ENGINE OIL
REMOTE MOUNTED
AN ATTACHMENT

133-5226 FILTER GP-ENGINE OIL

133-5226 FILTER GP-ENGINE OIL
REMOTE MOUNTED
AN ATTACHMENT

2P-6475 FILTER GP-ENGINE OIL

2P-6475 FILTER GP-ENGINE OIL
S/N 7JB1-1280

5N-9410 FILTER GP-ENGINE OIL

5N-9410 FILTER GP-ENGINE OIL
REMOTE MOUNTED
AN ATTACHMENT

2P-7738 COOLER GP-ENGINE OIL

2P-7738 COOLER GP-ENGINE OIL
S/N 7JB1-1280

6C-1438 AIR CLEANER GP

6C-1438 AIR CLEANER GP
Type 1
AN ATTACHMENT

6C-1438 AIR CLEANER GP

6C-1438 AIR CLEANER GP
Type 2
AN ATTACHMENT

6I-0272 AIR CLEANER GP

6I-0272 AIR CLEANER GP
PART OF 6C-1438 AIR CLEANER GP
AN ATTACHMENT

7W-0649 AIR CLEANER GP

7W-0649 AIR CLEANER GP
CANNOT BE USED WITH GEN SET ENGINE ENCLOSURES
AN ATTACHMENT

2W-1011 FILTER GP-FUEL

2W-1011 FILTER GP-FUEL
S/N 7JB1-1180

2W-1011 FILTER GP-FUEL

2W-1011 FILTER GP-FUEL
S/N 7JB1181-UP
ALSO AN ATTACHMENT

GASKET & SEAL KITS

391-8256 KIT-CYLINDER HEAD GASKET

391-8256 KIT-CYLINDER HEAD GASKET
CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD.. INCLUDES THE TURBO GASKETS BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED.. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY.. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS, ETC.. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750 & UP
FIELD REPLACEMENT FOR 142-0228 KIT-GASKET
FIELD INSTALLATION

447-8653 KIT-CYLINDER HEAD GASKET

447-8653 KIT-CYLINDER HEAD GASKET
CLASSIC KIT IS SERVICED ONLY AS A COMPLETE PACKAGE
FIELD INSTALLATION

391-8229 KIT-FRONT COVER GASKET

391-8229 KIT-FRONT COVER GASKET -FRONT STRUCTURE
FIELD INSTALLATION

398-2955 KIT-FRONT COVER GASKET

398-2955 KIT-FRONT COVER GASKET
CLASSIC. 673.1 X 322.6 X 25.4-MM
FIELD INSTALLATION

147-5543 KIT-GASKET

147-5543 KIT-GASKET
KIT CONTAINS GASKETS AND SEALS TO ASSEMBLE AND REINSTALL THE OIL COOLERS, OIL FILTER BASE, AND ATTACHING LINES
FIELD INSTALLATION

155-1379 KIT-GASKET

155-1379 KIT-GASKET -SINGLE CYLINDER HEAD
S/N 7JB6118-UP
CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD
FIELD REPLACEMENT ORDER @@@@@392-4479@@@@@
FIELD INSTALLATION

155-1380 KIT-GASKET

155-1380 KIT-GASKET -SINGLE CYLINDER HEAD
CONTAINS THE GASKET, SEALS, & BENDABLE LOCKS TO REBUILD & REINSTALL A SINGLE CYLINDER HEAD
FIELD REPLACEMENT ORDER @@@@@392-4479@@@@@
FIELD INSTALLATION

187-0605 KIT-GASKET

187-0605 KIT-GASKET -CENTRAL, LOWER STRUCTURE
FIELD INSTALLATION

208-4836 KIT-GASKET

208-4836 KIT-GASKET -WATER PUMP
THIS KIT IS FOR ALL 3300 ENGINES AND COME WITH ALL 3300 REMAN WATER PUMPS. THIS KIT CONTAINS THE GASKETS AND SEALS TO INSTALL THE BYPASS ELBOW AND MAIN WATER PUMP
FIELD REPLACEMENT FOR 170-1834 KIT-GASKET, 171-3686 KIT-GASKET, 204-4464 KIT-GASKET
FIELD INSTALLATION

234-8014 KIT-GASKET

234-8014 KIT-GASKET -SINGLE CYLINDER HEAD
FIELD INSTALLATION

281-0029 KIT-GASKET

281-0029 KIT-GASKET -SINGLE FUEL INJECTOR SEALS
FIELD INSTALLATION

382-5055 KIT-GASKET

382-5055 KIT-GASKET
CLASSIC. 553.7 X 406.4 X 25.4-MM. CENTRAL LOWER STRUCTURE
FIELD INSTALLATION

383-1575 KIT-GASKET

383-1575 KIT-GASKET -AFTERCOOLER & LINES
CLASSIC. 736.6 X 132.1 X 12.7-MM
FIELD INSTALLATION

383-3710 KIT-GASKET

383-3710 KIT-GASKET -FRONT STRUCTURE
CLASSIC. 666.4 X 318.8 X 23.5 MM
FIELD INSTALLATION

386-3815 KIT-GASKET

386-3815 KIT-GASKET -SINGLE CYLINDER HEAD
CLASSIC. 965.2 X 279.4 X 30.5-MM
FIELD INSTALLATION

387-2925 KIT-GASKET

387-2925 KIT-GASKET
CLASSIC KIT IS SERVICED ONLY AS A COMPLETE PACKAGE
FIELD INSTALLATION

391-8604 KIT-GASKET

391-8604 KIT-GASKET -CENTRAL, LOWER STRUCTURE
FIELD INSTALLATION

392-0704 KIT-GASKET

392-0704 KIT-GASKET -TURBOCHARGER
KIT CONTAINS GASKETS AND SEALS TO REINSTALL THE TURBOS AND ATTACHING LINES
FIELD INSTALLATION

392-4479 KIT-GASKET

392-4479 KIT-GASKET -SINGLE CYLINDER HEAD
CONTAINS THE GASKET, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD
OPTIONAL FIELD REPLACEMENT ORDER @@@@@518-3990@@@@@
FIELD REPLACEMENT FOR @@@@@155-1380@@@@@, @@@@@155-1379@@@@@
FIELD INSTALLATION

392-5441 KIT-GASKET

392-5441 KIT-GASKET -CENTRAL, LOWER STRUCTURE
CONTAINS THE GASKETS, SEALS AND BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, AND BLOCK COVERS
FIELD INSTALLATION

392-5540 KIT-GASKET

392-5540 KIT-GASKET -CENTRAL AND LOWER STRUCTURE
OPTIONAL FIELD REPLACEMENT ORDER @@@@@518-3992@@@@@
FIELD INSTALLATION

392-9764 KIT-GASKET

392-9764 KIT-GASKET -ENGINE OIL COOLER
KIT CONTAINS GASKETS AND SEALS TO ASSEMBLE AND REINSTALL THE OIL COOLERS, OIL FILTER BASE, AND ATTACHING LINES
FIELD INSTALLATION

393-3625 KIT-GASKET

393-3625 KIT-GASKET -FRONT STRUCTURE
CLASSIC. 635 X 317.5 X 15.2-MM
FIELD INSTALLATION

437-8662 KIT-GASKET

437-8662 KIT-GASKET -SINGLE CYLINDER HEAD
CLASSIC. 990.6 X 292.1 X 38.1 MM. 990.6 X 292.1 X 38.1 MM
FIELD INSTALLATION

437-8674 KIT-GASKET

437-8674 KIT-GASKET
SINGLE CYLINDER HEAD. CLASSIC KIT IS SERVICED ONLY AS A COMPLETE PACKAGE
FIELD INSTALLATION

471-3367 KIT-GASKET

471-3367 KIT-GASKET -CENTRAL, LOWER STRUCTURE
KIT CONTAINS THE GASKETS, SEALS & BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP & BLOCK COVERS
FOR USE WITH @@@@@ 2W-1557@@@@@
FIELD INSTALLATION

471-3368 KIT-GASKET

471-3368 KIT-GASKET
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET
FIELD INSTALLATION

518-3983 KIT-GASKET

518-3983 KIT-GASKET -SINGLE FUEL INJECTOR
17.8 X 17.8 X 7.6 MM. CLASSIC
FIELD INSTALLATION

518-3990 KIT-GASKET

518-3990 KIT-GASKET
CLASSIC
FIELD INSTALLATION

518-3992 KIT-GASKET

518-3992 KIT-GASKET
CLASSIC
FIELD INSTALLATION

6V-2984 KIT-GASKET

6V-2984 KIT-GASKET -REAR STRUCTURE
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER. KIT DOES NOT INCLUDE OIL PAN GASKET
FIELD INSTALLATION

LUBRICANTS & FLUIDS

9N-3659 COOLANT CONDITIONER GP

9N-3659 COOLANT CONDITIONER GP
REMOTE MOUNTED
AN ATTACHMENT

KIT-REBUILD

391-8256 KIT-CYLINDER HEAD GASKET

447-8653 KIT-CYLINDER HEAD GASKET

447-8653 KIT-CYLINDER HEAD GASKET
CLASSIC KIT IS SERVICED ONLY AS A COMPLETE PACKAGE
FIELD INSTALLATION

492-6411 KIT-ENGINE GASKET

492-6411 KIT-ENGINE GASKET
SINGLE CYLINDER HEAD
FOR USE WITH @@@@@2W-1557@@@@@
FIELD INSTALLATION

391-8229 KIT-FRONT COVER GASKET

391-8229 KIT-FRONT COVER GASKET -FRONT STRUCTURE
FIELD INSTALLATION

398-2955 KIT-FRONT COVER GASKET

398-2955 KIT-FRONT COVER GASKET
CLASSIC. 673.1 X 322.6 X 25.4-MM
FIELD INSTALLATION

393-1165 KIT-TURBOCHARGER GASKET

393-1165 KIT-TURBOCHARGER GASKET -TURBOCHARGER
KIT INCLUDES GASKETS AND SEALS TO REINSTALL THE TURBOS AND ATTACHING LINES. KIT INCLUDES TURBO MOUNTING HARDWARE
FIELD INSTALLATION

147-5543 KIT-GASKET

147-5543 KIT-GASKET
KIT CONTAINS GASKETS AND SEALS TO ASSEMBLE AND REINSTALL THE OIL COOLERS, OIL FILTER BASE, AND ATTACHING LINES
FIELD INSTALLATION

155-1379 KIT-GASKET

155-1380 KIT-GASKET

155-1380 KIT-GASKET -SINGLE CYLINDER HEAD
CONTAINS THE GASKET, SEALS, & BENDABLE LOCKS TO REBUILD & REINSTALL A SINGLE CYLINDER HEAD
FIELD REPLACEMENT ORDER @@@@@392-4479@@@@@
FIELD INSTALLATION

187-0605 KIT-GASKET

187-0605 KIT-GASKET -CENTRAL, LOWER STRUCTURE
FIELD INSTALLATION

208-4836 KIT-GASKET

234-8014 KIT-GASKET

234-8014 KIT-GASKET -SINGLE CYLINDER HEAD
FIELD INSTALLATION

281-0029 KIT-GASKET

281-0029 KIT-GASKET -SINGLE FUEL INJECTOR SEALS
FIELD INSTALLATION

382-5055 KIT-GASKET

382-5055 KIT-GASKET
CLASSIC. 553.7 X 406.4 X 25.4-MM. CENTRAL LOWER STRUCTURE
FIELD INSTALLATION

383-1575 KIT-GASKET

383-1575 KIT-GASKET -AFTERCOOLER & LINES
CLASSIC. 736.6 X 132.1 X 12.7-MM
FIELD INSTALLATION

383-3710 KIT-GASKET

383-3710 KIT-GASKET -FRONT STRUCTURE
CLASSIC. 666.4 X 318.8 X 23.5 MM
FIELD INSTALLATION

386-3815 KIT-GASKET

386-3815 KIT-GASKET -SINGLE CYLINDER HEAD
CLASSIC. 965.2 X 279.4 X 30.5-MM
FIELD INSTALLATION

387-2925 KIT-GASKET

387-2925 KIT-GASKET
CLASSIC KIT IS SERVICED ONLY AS A COMPLETE PACKAGE
FIELD INSTALLATION

391-8604 KIT-GASKET

391-8604 KIT-GASKET -CENTRAL, LOWER STRUCTURE
FIELD INSTALLATION

392-0704 KIT-GASKET

392-0704 KIT-GASKET -TURBOCHARGER
KIT CONTAINS GASKETS AND SEALS TO REINSTALL THE TURBOS AND ATTACHING LINES
FIELD INSTALLATION

392-4479 KIT-GASKET

392-5441 KIT-GASKET

392-5441 KIT-GASKET -CENTRAL, LOWER STRUCTURE
CONTAINS THE GASKETS, SEALS AND BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, AND BLOCK COVERS
FIELD INSTALLATION

392-5540 KIT-GASKET

392-5540 KIT-GASKET -CENTRAL AND LOWER STRUCTURE
OPTIONAL FIELD REPLACEMENT ORDER @@@@@518-3992@@@@@
FIELD INSTALLATION

392-9764 KIT-GASKET

392-9764 KIT-GASKET -ENGINE OIL COOLER
KIT CONTAINS GASKETS AND SEALS TO ASSEMBLE AND REINSTALL THE OIL COOLERS, OIL FILTER BASE, AND ATTACHING LINES
FIELD INSTALLATION

393-3625 KIT-GASKET

393-3625 KIT-GASKET -FRONT STRUCTURE
CLASSIC. 635 X 317.5 X 15.2-MM
FIELD INSTALLATION

437-8662 KIT-GASKET

437-8662 KIT-GASKET -SINGLE CYLINDER HEAD
CLASSIC. 990.6 X 292.1 X 38.1 MM. 990.6 X 292.1 X 38.1 MM
FIELD INSTALLATION

437-8674 KIT-GASKET

437-8674 KIT-GASKET
SINGLE CYLINDER HEAD. CLASSIC KIT IS SERVICED ONLY AS A COMPLETE PACKAGE
FIELD INSTALLATION

471-3367 KIT-GASKET

471-3368 KIT-GASKET

471-3368 KIT-GASKET
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET
FIELD INSTALLATION

518-3983 KIT-GASKET

518-3983 KIT-GASKET -SINGLE FUEL INJECTOR
17.8 X 17.8 X 7.6 MM. CLASSIC
FIELD INSTALLATION

518-3990 KIT-GASKET

518-3990 KIT-GASKET
CLASSIC
FIELD INSTALLATION

518-3992 KIT-GASKET

518-3992 KIT-GASKET
CLASSIC
FIELD INSTALLATION

6V-2984 KIT-GASKET

6V-2984 KIT-GASKET -REAR STRUCTURE
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER. KIT DOES NOT INCLUDE OIL PAN GASKET
FIELD INSTALLATION

Information:

(For parts list, see above)

SERVICE EQUIPMENT AND SUPPLIES

BEARING KITS

Engine News

New Caterpillar Publication, "Questions And Answers About Engine Bearings" Is Available
1980/08/13

Reuse Of Engine Bearings
1983/05/25

Reuse Of Engine Bearings
1983/11/30

Special Instruction

Installation Of Service Replacement Thrust Plates{1203}
Installation Of Service Replacement Thrust Plates{1203}

Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}

Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}

Technical Information Bulletin

Connecting Rod Bearings
Connecting Rod Bearings

Disassembly and Assembly

Crankshaft Main Bearings
3304B & 3306B INDUSTRIAL & MARINE ENGINES

Connecting Rod Bearings
3304B & 3306B INDUSTRIAL & MARINE ENGINES

Camshaft Bearings
3304B & 3306B INDUSTRIAL & MARINE ENGINES

Crankshaft Main Bearings
3304B & 3306B MARINE ENGINES

Connecting Rod Bearings
3304B & 3306B MARINE ENGINES

Camshaft Bearings
3304B & 3306B MARINE ENGINES

Service Magazine

6V2050 Tapered Rod Tool Group Available For Removal And Installation Of Bearings{1219,1218,1214}
1980/06/09

Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03

New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09

Reuse Of Engine Bearings{1230}
1983/05/16

Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21

New Connecting Rod And Main Bearings Used{1230,1219,1203}
1984/03/26

Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29

Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08

Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01

Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12

Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28

New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04

New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11

Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17

Oversize Main Bearings Used In Remanufactured Engines Are Also Available For Parts Service{1203}
1991/05/06

CARTRIDGE KITS

Engine News

Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22

Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01

Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01

Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15

Special Instruction

2W722 Turbocharger Cartridge Repair Kit{1053}
2W722 Turbocharger Cartridge Repair Kit{1053}

2W715 Turbocharger Cartridge Repair Kit{1053}
2W715 Turbocharger Cartridge Repair Kit{1053}

Service Magazine

Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16

Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03

Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02

Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28

Add Chamfer To Cartridge Assembly Bearings To Prevent Oil Leakage{1052,1053}
1977/11/21

Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30

Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06

Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15

Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25

Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20

Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03

6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10

Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22

CHARTS & FILMS

Engine News

New Fuel Nozzle Test Sheet Available
1982/10/20

Reference Chart for Engine Improvements
1982/11/10

Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed
1987/05/01

New Engine Wall Charts Give Maintenance Management Recommendations
1989/03/01

New Engine Information Plates Require More Information{1000}
1996/02/16

Special Instruction

Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}

Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}

Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}

Specifications

Belt Tension Chart
3304B & 3306B INDUSTRIAL & MARINE ENGINES

Service Magazine

Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03

Separate Valve Stem Gauges Available{0653,1000}
1982/06/07

New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04

Reference Chart for Engine Improvements{0374,1000}
1982/10/25

Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01

Engine Information Plate Contains More Data; Use Of Performance Specifications{1250,7557}
1985/10/28

Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16

Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01

Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22

Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed{7555,7558,1161}
1979/06/04

Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27

New Engine Wall Charts Give Maintenance Management Recommendations{0374,0375,7500,7557,7580}
1989/03/06

Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25

Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22

Service Charts and Decals Available {0374, 0375, 7405, 7557}
2000/03/06

Ordering a Replacement Machine Identification Plate {7405, 7557}
Ordering a Replacement Machine Identification Plate {7405, 7557}

FILTERS

Engine News

New Oil Filter Base Has Larger Oil Passages; Some Bases Need Modification
1980/09/10

Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12

Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper
1986/03/01

New 4C5084 Oil Filter Cutter Replaces Former 6V7905 Filter Cutter
1990/11/01

Air Filter Maintenance
1991/10/01

Light Green Gasket Material On Secondary Air Filter Elements May Stick To Filter Housing
1992/02/01

New Oil for All Engines Burning Low-Sulfur Fuel (0.05% or less) Except The 3600 Family Of Engines{1318}
1995/02/01

Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01

New High Efficiency Oil Filters are Now Available {1308}
2004/03/01

Special Instruction

Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}

Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}

Service Letter-NACD

The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Specifications

Fuel Priming Pump And Primary Fuel Filter
3304B & 3306B INDUSTRIAL & MARINE ENGINES

Fuel Filter Base
3304B & 3306B INDUSTRIAL & MARINE ENGINES

Engine Oil Filter And Bypass Valve
3304B & 3306B INDUSTRIAL & MARINE ENGINES

Primary Fuel Filter
3304B & 3306B INDUSTRIAL & MARINE ENGINE ATTACHMENTS

Air Cleaner And Precleaner
3304B & 3306B INDUSTRIAL & MARINE ENGINE ATTACHMENTS

Air Cleaner Mounting Group
3304B & 3306B INDUSTRIAL & MARINE ENGINE ATTACHMENTS

Tool Operating Manual

20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}

Service Letter-China

The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory

Service Letter-Asia

Reuse And Salvage Guidelines

Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}

Service Letter-APD

The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory

Disassembly and Assembly

Oil Filter & Oil Filter Base
3304B & 3306B INDUSTRIAL & MARINE ENGINES

Oil Filter Base
3304B & 3306B INDUSTRIAL & MARINE ENGINES

Fuel Filter & Base
3304B & 3306B INDUSTRIAL & MARINE ENGINES

Engine Oil Cooler
3304B & 3306B INDUSTRIAL & MARINE ENGINES

Air Cleaner Group
3304B & 3306B INDUSTRIAL & MARINE ENGINES

Oil Filter And Oil Filter Base
3304B & 3306B MARINE ENGINES

Oil Filter Base
3304B & 3306B MARINE ENGINES

Fuel Filter And Base
3304B & 3306B MARINE ENGINES

Engine Oil Cooler
3304B & 3306B MARINE ENGINES

Air Cleaner Group
3304B & 3306B MARINE ENGINES

Service Magazine

New Oil Filter Base Has Larger Oil Passages; Some Bases Need Modification{1306}
1980/08/11

Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22

Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03

New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27

Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17

Canister Size Of Coolant Conditioner Element Has Changed{1350}
1985/11/25

Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13

Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10

Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05

Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06

Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line{1274}
1978/06/26

New Transmission And Engine Oil Cooler Has Rubber End Sheets{1375,1378}
1988/02/08

Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19

New Larger Capacity Water Separator Is Available{1250}
1979/03/12

Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27

Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08

Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15

Air Filter Maintenance{1051,1054}
1991/09/30

Light Green Gasket Material On Secondary Air Filter Elements May Stick To Filter Housing{1054,1051}
1992/02/10

Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25

Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11

Exhaust Dust Ejector Operation{1055,1068}
1994/09/26

Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26

New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES® Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12

GASKET & SEAL KITS

Engine News

Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed
1979/06/06

Gasket Kits
1982/02/10

9U5839 Liquid Gasket Material Available For Use With Aluminum
1992/04/01

New Gasket Kits To Service Caterpillar Diesel And Natural Gas Engines
1978/08/16

Improvements to Caterpillar's Gasket Kits for Engines {7555}
2001/01/01

Special Instruction

Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}

Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}

Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}

Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}

Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}

Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}

Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Service Letter-NACD

Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Service Letter-Brazil

Service Letter-Truck/Ag/Marine

Service Letter-China

Service Letter-Asia

Reuse And Salvage Guidelines

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Service Letter-APD

Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits

Disassembly and Assembly

Crankshaft Front Seal & Wear Sleeve
3304B & 3306B INDUSTRIAL & MARINE ENGINES

Crankshaft Rear Seal & Wear Sleeve
3304B & 3306B INDUSTRIAL & MARINE ENGINES

Service Magazine

6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01

Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18

Tools To Install Crankshaft Seal And Wear Sleeve{1160,1161,0622}
1977/07/11

Double Lip Seal With Hydrodynamic Grooves Used At Rear Of Crankshaft {1161,1200}
1987/09/28

Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines{1161}
1979/03/26

Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed{7555,7558,1161}
1979/06/04

Improved Caterpillar O-ring Face Seals are Now Available {7555}
2000/05/08

HARDWARE & SEALANTS

Engine News

Use Of Metric Fasteners
1981/11/25

9U5839 Liquid Gasket Material Available For Use With Aluminum
1992/04/01

Special Instruction

Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}
Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}

Chart for Heli-Coil Repair {0676}
Chart for Heli-Coil Repair {0676}

Specifications

Exhaust Fitting
3304B & 3306B INDUSTRIAL & MARINE ENGINE ATTACHMENTS

Service Magazine

2P8316 Dowel Now Available For Parts Service{0652}
1979/04/30

LITERATURE GP

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

Interactive Self-Paced Computer Training Course Available forTechnical Marketing Information (TMI) System Users {0314}
2000/02/01

The Current Special Publication, PECP9067, "One Safe Source" Is Now Available Through The Internet {0374}
2002/05/01

The Contents Of The Service Manuals For All Commercial Engines Is Available On The Caterpillar Intranet {1000}
2002/12/01

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/25

New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Special Instruction

Index of Repair Process Engineering Publications {0374, 1000, 7000}
Index of Repair Process Engineering Publications {0374, 1000, 7000}

Procedure for Ordering Vintage Parts {0374, 1000, 7000}
Procedure for Ordering Vintage Parts {0374, 1000, 7000}

Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}
Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}

Caterpillar Communication Regarding REACH Article 33{0374, 7000}
Caterpillar Communication Regarding REACH Article 33{0374, 7000}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Visual Service Procedures - Colors and Symbols {0374, 7000, 7006, 7960}
Visual Service Procedures - Colors and Symbols {0374, 7000, 7006, 7960}

Tool Operating Manual

9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}

439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}

Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}

Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}

Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}

456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}

Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}

20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}

464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}

General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}
General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}

442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}

Zip-Tie Installation Guide{0374, 0599, 7000}
Zip-Tie Installation Guide{0374, 0599, 7000}

NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}

{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}

NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}

Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}

Portable Aqueous Based Parts Cleaners, Models 482-9830, 482-9831, and 482-9832 {0374, 0599, 0680, 0699}
Portable Aqueous Based Parts Cleaners, Models 482-9830, 482-9831, and 482-9832 {0374, 0599, 0680, 0699}

Reuse And Salvage Guidelines

Index of Repair Process Engineering Publications {0374, 1000, 7000}
Index of Repair Process Engineering Publications {0374, 1000, 7000}

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

General Salvage and Reconditioning Techniques {0374, 1000}
General Salvage and Reconditioning Techniques {0374, 1000}

Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}
Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}

Contamination Control Guidelines

Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}

Applied Failure Analysis

Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}

Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}

Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}

Technical Analysis

Technical Analysis 1 (TA1) Visual Inspection for Industrial Engine {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Industrial Engine {0372, 1000, 7000, 753S, 7565}

Service Magazine

Interactive Self-Paced Computer Training Course Available forTechnical Marketing Information (TMI) System Users {0314}
2000/01/31

The Current Special Publication, PECP9067, "One Safe Source" Is Now Available Through The Internet {0374}
2002/05/13

Announcing the Combination of Groups Within the Paper Copies of the Caterpillar Parts Manuals {0374}
2002/06/03

Recent Changes to the R134a Refrigerant Air Conditioning Manuals Are Now Available for All Caterpillar Products {0374, 1802, 1805, 1807, 1808, 1809, 7309, 7320, 7322, 7343}
2014/07/17

A New Tool Operating Manual for Proper Zip-Tie Installation Is Now Available for All Caterpillar Products {0374, 0599, 7000}
2015/08/10

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/28

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

New Service Information Content Is Now Available in Channel 1 {0374, 7000}
New Service Information Content Is Now Available in Channel 1 {0374, 7000}

LUBRICANTS & FLUIDS

Engine News

Why Engines Are Damaged By Fuel Sulfur
1979/08/22

Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur
1982/05/12

Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems
1982/08/25

New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests
1982/09/22

Fuel Sulfur Analyzer Available
1986/01/01

High Silicates In Antifreeze
1986/02/01

Oil Total Base Number (TBN) Test Kit Available
1986/02/01

New 8T2998 Lubricant Available
1986/03/01

High Silicates In Antifreeze
1986/03/01

Caterpillar Antifreeze Now Used And Available From Parts Departments
1986/11/01

Easy Five-Minute Coolant Conditioner Test With 8T5296 Coolant Conditioner Test Kit
1987/04/01

Cooling System Conditioner
1987/04/01

Analyzing Caterpillar And Competitive Antifreezes For Amount Of Silicates
1988/02/01

New Publication Available-"Diesel Fuels And Your Engine"
1988/03/01

Extraction Tools For "Live Oil Sampling"
1988/05/01

Lubricant Supplement Lists Specifications For CXP Lubricants
1988/06/01

New Oil for All Engines Burning Low-Sulfur Fuel (0.05% or less) Except The 3600 Family Of Engines{1318}
1995/02/01

A New Edition of the Special Publication, SEBD0640, "Oil and Your Engine" is Available {1348}
2001/11/01

Understanding Elevated Copper Levels in Used Oil Samples {1348, 7542}
2003/02/01

Special Publication, SEBU6251, "Caterpillar Commercial Diesel Engine Fluids Recommendations" has been Revised {0645, 1000, 1250, 1280, 1300, 1348, 1350, 1395}
2004/05/01

Caterpillar Extended Life Inhibitor (ELI) Is Now Available for Use in Applications that Freeze Protection Is Not Needed {1350, 1352, 1395}
2013/08/05

Special Instruction

Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}

Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}

Instructions for Use of Cat Coolant Conditioner for Aluminum Components {1350, 1352, 1395}
Instructions for Use of Cat Coolant Conditioner for Aluminum Components {1350, 1352, 1395}

Tool Operating Manual

NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}

370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}

Disassembly and Assembly

Oil Filter & Oil Filter Base
3304B & 3306B INDUSTRIAL & MARINE ENGINES

Oil Filter And Oil Filter Base
3304B & 3306B MARINE ENGINES

Service Magazine

Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22

Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03

Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28

New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27

Canister Size Of Coolant Conditioner Element Has Changed{1350}
1985/11/25

Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13

Oil Total Base Number (TBN) Test Kit Available{1300}
1986/01/20

High Silicates In Antifreeze{1350}
1986/02/03

New 8T2998 Lubricant Available{0645,1210}
1986/02/17

Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10

Caterpillar Antifreeze Now Used And Available From Parts Departments{1350,1395}
1986/11/10

Easy Five-Minute Coolant Conditioner Test With 8T5296 Coolant Conditioner Test Kit{1395,0786}
1987/03/23

Cooling System Conditioner{1395,1350}
1987/03/23

5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23

Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06

Analyzing Caterpillar And Competitive Antifreezes For Amount Of Silicates{1350,1395}
1988/02/22

New Publication Available-"Diesel Fuels And Your Engine"{0374,0375,0645}
1988/03/21

Extraction Tools For "Live Oil Sampling"{7770,0770,0781,0783,0784}
1988/04/18

Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06

Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19

Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27

Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15

Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17

New Engine Wall Charts Give Maintenance Management Recommendations{0374,0375,7500,7557,7580}
1989/03/06

Engine Coolant Can Be Recycled{1395}
1989/11/13

New Cooling System Cleaner Now Available For All Engines{1350,0680,1352,1353}
1989/12/25

Caterpillar Introduces New Long Life Heavy Duty Engine Coolant{1395}
1994/09/19

A New Quick Coupler is Required to Extend the Service Life of Dual Purpose Valves {6129, 7542}
2002/01/21

A New Edition of the Special Publication, SEBD0640, "Oil and Your Engine" is Available {1348}
2001/11/19

Color Coded Dust Caps for S·O·S Ports Will Be Available {7770}
2002/04/01

Recent Changes to the R134a Refrigerant Air Conditioning Manuals Are Now Available for All Caterpillar Products {0374, 1802, 1805, 1807, 1808, 1809, 7309, 7320, 7322, 7343}
2014/07/17

MISCELLANEOUS INFORMATION

Truck Engine News

The Product Structure Link In The Service Information System (SIS) Has Been Changed For Service Letters That Address Parts Stock Distribution {1000, 7750}
2001/08/01

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Engine News

Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed
1979/06/06

Protect Your Reconditioned Or Rebuilt Engines During Start-Up
1980/10/01

Double-Check Those Dimensions
1980/11/12

Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12

Changes Have Been Made To Caterpillar Service Literature
1981/03/04

List Of Service Publications
1981/09/16

"SIRS User Instructions" Available
1982/02/24

Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/04/07

Hunting Down The Cheaters
1985/06/01

Keeping The Product Information System Up-To-Date
1985/10/01

Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers
1986/03/01

Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper
1986/03/01

New Index Lists Engine Special Instructions By SMCS Code
1986/04/01

List of Service Publications
1986/05/01

Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01

Three Types Of Maintenance Management Publications Available For Engines
1986/06/01

Changes Have Been Made To 0T Microfiche (Fuel Setting And Related Information)
1986/07/01

More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01

List of Service Publications
1986/10/01

Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals
1986/11/01

Check For Dirt Before Replacing Pyrometer Switch
1987/01/01

List of Service Publications
1987/02/01

List of Service Publications
1987/08/01

List of Service Publications
1988/01/01

List of Service Publications
1988/04/01

List of Service Publications
1988/10/01

New Engine Wall Charts Give Maintenance Management Recommendations
1989/03/01

"Ugly's Electrical-References" SEBD0983, Now Available
1990/06/01

List of Service Publications
1990/10/01

List of Service Publications{0374,0375}
1991/03/01

List of Service Publications
1991/06/01

List of Service Publications
1991/08/01

List of Service Publications{0374,0375}
1991/12/01

Light Green Gasket Material On Secondary Air Filter Elements May Stick To Filter Housing
1992/02/01

List of Service Publications
1992/02/01

List of Service Publications
1992/10/01

List of Service Publications
1993/03/01

List of Service Publications
1993/08/01

New Oil for All Engines Burning Low-Sulfur Fuel (0.05% or less) Except The 3600 Family Of Engines{1318}
1995/02/01

New Guideline For Product Information, SEBF8340, " Fuel Systems Troubleshooting Guide For 3204, 3300, And 3400 Engines With New Scroll Fuel Systems (NSFS)" Available {0374,1250}
1998/06/01

Safety Vent Caps For Caterpillar Batteries
1977/07/13

New Color For Fiche In Engine Numerical Parts Record Library
1978/07/05

New Gasket Kits To Service Caterpillar Diesel And Natural Gas Engines
1978/08/16

Tips For Service Information Retrieval System (SIRS) Users
1978/11/15

Interactive Self-Paced Computer Training Course Available forTechnical Marketing Information (TMI) System Users {0314}
2000/02/01

The Product Structure Link In The Service Information System (SIS) Has Been Changed For Service Letters That Address Parts Stock Distribution {1000, 7750}
2001/09/01

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Special Instruction

Use Of 6V3025 Battery Cable Repair Kit{0613, 1400}
Use Of 6V3025 Battery Cable Repair Kit{0613, 1400}

Chart for Heli-Coil Repair {0676}
Chart for Heli-Coil Repair {0676}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}

Caterpillar Communication Regarding REACH Article 33{0374, 7000}
Caterpillar Communication Regarding REACH Article 33{0374, 7000}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Visual Service Procedures - Colors and Symbols {0374, 7000, 7006, 7960}
Visual Service Procedures - Colors and Symbols {0374, 7000, 7006, 7960}

Tool Operating Manual

9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}

Reuse And Salvage Guidelines

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Technical Analysis

Technical Analysis 1 (TA1) Visual Inspection for Industrial Engine {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Industrial Engine {0372, 1000, 7000, 753S, 7565}

Disassembly and Assembly

Oil Filter & Oil Filter Base
3304B & 3306B INDUSTRIAL & MARINE ENGINES

Fuel Filter & Base
3304B & 3306B INDUSTRIAL & MARINE ENGINES

Oil Filter And Oil Filter Base
3304B & 3306B MARINE ENGINES

Fuel Filter And Base
3304B & 3306B MARINE ENGINES

Service Magazine

6V2050 Tapered Rod Tool Group Available For Removal And Installation Of Bearings{1219,1218,1214}
1980/06/09

Use The 6V2056 Rod And 6V2057 Point To Find True Top Center{0653}
1980/07/14

Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21

Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22

Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03

Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03

New Address For Repair Of Diagnostic Tools{0650}
1982/06/14

New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27

Remanufactured Connecting Rod Assemblies{1218}
1984/01/23

Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29

Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27

Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03

Higher Torque Can Be Used With 6V6980 Nozzle Puller Group{0706,1254}
1985/06/10

Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01

Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07

Engine Information Plate Contains More Data; Use Of Performance Specifications{1250,7557}
1985/10/28

Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18

Canister Size Of Coolant Conditioner Element Has Changed{1350}
1985/11/25

Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13

Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10

Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07

Three Types Of Maintenance Management Publications Available For Engines{0374}
1986/06/09

New 5P7307 Engine Turning Tool Group Fits All Engines{0611}
1977/02/14

Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18

Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25

Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11

Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22

Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16

Check For Plugged Orifices In Mechanical Pressure Gauges{7450}
1987/03/02

New 8T5261 Bushing Installer And Remover Adapter Tool Available{0600}
1987/03/02

Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06

Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24

Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24

Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12

Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25

Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16

Analyzing Caterpillar And Competitive Antifreezes For Amount Of Silicates{1350,1395}
1988/02/22

New Publication Available-"Diesel Fuels And Your Engine"{0374,0375,0645}
1988/03/21

Extraction Tools For "Live Oil Sampling"{7770,0770,0781,0783,0784}
1988/04/18

A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing{0626}
1979/01/08

Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22

Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19

9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28

A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28

Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed{7555,7558,1161}
1979/06/04

New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11

Caution Label Added To 5P4150 Nozzle Testing Group{0651}
1979/07/09

Splash Shields Added To Caterpillar Fuel Injection Test Bench{0652}
1979/08/13

Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27

Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15

Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17

New Publication Available-"Coolant And Your Engine"{1395,0374,0375}
1989/02/13

New Engine Wall Charts Give Maintenance Management Recommendations{0374,0375,7500,7557,7580}
1989/03/06

Preventive Maintenance For Batteries{1401}
1989/03/27

Special Instruction, "Battery Charging Rate And Time Tables," Available On Oil Resistant Paper{0374,1401}
1989/06/19

Engine Coolant Can Be Recycled{1395}
1989/11/13

New Cooling System Cleaner Now Available For All Engines{1350,0680,1352,1353}
1989/12/25

Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07

Oversize Main Bearings Used In Remanufactured Engines Are Also Available For Parts Service{1203}
1991/05/06

Air Filter Maintenance{1051,1054}
1991/09/30

Light Green Gasket Material On Secondary Air Filter Elements May Stick To Filter Housing{1054,1051}
1992/02/10

Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25

Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11

New Guideline For Product Information, SEBF8340, " Fuel Systems Troubleshooting Guide For 3204, 3300, And 3400 Engines With New Scroll Fuel Systems (NSFS)" Available {0374,1250}
1998/06/22

Interactive Self-Paced Computer Training Course Available forTechnical Marketing Information (TMI) System Users {0314}
2000/01/31

Service Information System Product Structure Link Change for Service Letters that Address Parts Stock Distribution {1000, 7000, 7750}
2001/08/20

Correction to Service Magazine , "Use the Technical Information Feedback Systems" {0374}
2001/12/03

A New Quick Coupler is Required to Extend the Service Life of Dual Purpose Valves {6129, 7542}
2002/01/21

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

New Service Information Content Is Now Available in Channel 1 {0374, 7000}
New Service Information Content Is Now Available in Channel 1 {0374, 7000}

PAINT

Engine News

Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method
1987/06/01

Service Magazine

Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01

New Engine Wall Charts Give Maintenance Management Recommendations{0374,0375,7500,7557,7580}
1989/03/06

PARTS STOCK, ORDERING & RETURN

Engine News

Engine Storage; Engine Start-Up After Storage
1982/02/24

Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/01

Special Instruction

Procedure for Ordering Vintage Parts {0374, 1000, 7000}
Procedure for Ordering Vintage Parts {0374, 1000, 7000}

Service Letter-NACD

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK

Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock

Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock

The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.

Service Letter-Australia

Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock

Service Letter-CFEL

Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock

Service Letter-CSARL

Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock

Service Letter-Americas

Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock

Service Letter-Brazil

Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock

Service Letter-Truck/Ag/Marine

Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock

Service Letter-China

Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock

Service Letter-Asia

Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock

Service Letter-APD

Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock

Service Magazine

Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18

Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22

New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09

PM (PREVENTIVE MAINTENANCE) KITS

Special Instruction

Use Of Preventive Maintenance Kits{7501}
Use Of Preventive Maintenance Kits{7501}

Service Magazine

Preventive Maintenance For Batteries{1401}
1989/03/27

REBUILD & SALVAGE

Engine News

Revision To Guideline For Reusable Parts Is Available
1979/03/14

Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed
1979/06/06

Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22

Protect Your Reconditioned Or Rebuilt Engines During Start-Up
1980/10/01

Reuse Of Engine Bearings
1983/05/25

Reuse Of Engine Bearings
1983/11/30

Use Correct Valves When Rebuilding Engines
1985/09/01

Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01

Increase Piston Reuse With Keystone Piston Ring Gauge Group
1986/07/01

Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18

Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}

Special Instruction

2W722 Turbocharger Cartridge Repair Kit{1053}
2W722 Turbocharger Cartridge Repair Kit{1053}

Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}

2W715 Turbocharger Cartridge Repair Kit{1053}
2W715 Turbocharger Cartridge Repair Kit{1053}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Tool Operating Manual

464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}

442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}

NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}

{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}

Reuse And Salvage Guidelines

Fundamentals of Arc Spray for Reconditioning Components {0679}
Fundamentals of Arc Spray for Reconditioning Components {0679}

Fundamentals of Flame Spray for Reconditioning Components {0100, 0599, 0679}
Fundamentals of Flame Spray for Reconditioning Components {0100, 0599, 0679}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Thermal Spray Procedures for Exhaust Manifold (I.D. & O.D.){0679, 1059}
Thermal Spray Procedures for Exhaust Manifold (I.D. & O.D.){0679, 1059}

Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}

Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Service Magazine

Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21

Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08

Reuse Of Engine Bearings{1230}
1983/05/16

Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21

Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03

Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16

Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30

New Information On Reusable Cylinder Liners{1216}
1978/06/19

Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09

A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28

Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed{7555,7558,1161}
1979/06/04

Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20

Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

REMANUFACTURED PARTS

Truck Engine News

A Guide to Reman Product Markings is Now Available {7754}
2015/09/18

Engine News

In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09

Remanufactured Connecting Rod Assemblies
1984/02/22

Remanufactured Undersize Crankshafts Are Available
1984/04/11

Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01

Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01

Why Choose Caterpillar Remanufactured Crankshafts? Because We Offer More ...
1985/09/01

Remanufactured Heavy-Duty Starters And High-Amp Alternators
1987/06/01

Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts
1991/01/01

Oversize Main Bearings Used In Remanufactured Engines Are Also Available For Parts Service
1991/05/01

Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN)
1992/04/01

Be Sure To Use Correct Cup Plugs On OR2077, OR2554, And OR3258 Remanufactured 3304 And 3306 Short Blocks
1992/11/01

New Remanufactured Water Pump Groups Include Cast Iron Impellers{1361}
1997/01/22

A Guide to Reman Product Markings is Now Available {7754}
2015/09/17

Special Instruction

Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}

Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}

Installation Of 0R2554 Remanufactured Short Block Group{1200}
Installation Of 0R2554 Remanufactured Short Block Group{1200}

A Guide to Cat® Reman Product Markings {7754}
A Guide to Cat^® Reman Product Markings {7754}

Tool Operating Manual

NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}

Reuse And Salvage Guidelines

Fundamentals of Arc Spray for Reconditioning Components {0679}
Fundamentals of Arc Spray for Reconditioning Components {0679}

Thermal Spray Procedures for Exhaust Manifold (I.D. & O.D.){0679, 1059}
Thermal Spray Procedures for Exhaust Manifold (I.D. & O.D.){0679, 1059}

Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}

Service Magazine

Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21

Remanufactured Connecting Rod Assemblies{1218}
1984/01/23

Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19

Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18

Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30

Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25

New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08

Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17

Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07

Oversize Main Bearings Used In Remanufactured Engines Are Also Available For Parts Service{1203}
1991/05/06

Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20

Be Sure To Use Correct Cup Plugs On 0R2077, 0R2554, And 0R3258 Remanufactured Short Blocks{1200,1201}
1992/11/23

A Guide to Reman Product Markings is Now Available {7754}
2015/09/15

SHIPPING GP

Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07

Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25

New Engine Wall Charts Give Maintenance Management Recommendations{0374,0375,7500,7557,7580}
1989/03/06

Lubricity Limit Added To Preferred Distillate Fuel Recommendation {1280,7568}
1997/08/18

TOOLS

Truck Engine News

New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range {0776, 1350, 3000, 4000, 4150, 4250}
2006/03/01

Engine News

New 6V87 Gauge Measures Valve Stem Wear
1979/01/10

New 6V2120 Spline Sprocket Improves Depth Control Of 5P4175 Boring Tool Group
1980/05/14

6V2050 Tapered Rod Tool Group Available For Removal And Installation Of Bearings
1980/07/09

6V3150 Engine Pressure Group And 6V3121 Multitach Group Are Available For Testing Engines
1981/01/28

Changes Have Been Made To Caterpillar Service Literature
1981/03/04

Use 6V4089 Reamer Assembly To Clean Nozzle Bores
1981/05/20

Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers
1981/06/03

Instruction Cards For "Go-No Go" Gauges Now Available
1981/07/01

New Engine Testing And Adjusting Tools Give More Accuracy And Longer Service Life
1982/02/24

Use 6V6035 Hardness Tester On Crankshafts
1982/02/24

Use The 6V6059 Microlite With The 6V2196 Inspection Microscope
1982/04/07

Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/04/07

New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach
1982/05/12

New Address For Repair Of Diagnostic Tools
1982/06/16

Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25

Separate Valve Stem Gauges Available
1982/08/25

Dial Bore Gauge And Size Setting Fixture Available
1982/09/22

Service Information For Easier Use Of The 6V3100 Timing Indicator Group
1982/10/20

Make Change To 6V2100 Multitach And 5P9698 Calibrator
1982/12/15

Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15

New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15

Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15

Use The 6V5000 Infrared Thermometer Group To Measure Temperatures
1983/04/27

New Service Centers For 6V3100 Engine Timing Indicator Group
1983/10/26

Hunting Down The Cheaters
1985/06/01

Fuel Sulfur Analyzer Available
1986/01/01

Oil Total Base Number (TBN) Test Kit Available
1986/02/01

New Engine Timing Indicator Group Available
1986/07/01

Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01

New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity
1986/11/01

Check For Dirt Before Replacing Pyrometer Switch
1987/01/01

New 8T5261 Bushing Installer And Remover Adapter Tool Available
1987/03/01

Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups
1987/03/01

Check For Plugged Orifices In Mechanical Pressure Gauges
1987/03/01

5P957 And 5P3514 Coolant And Battery Tester
1987/04/01

Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems
1987/05/01

Two New Self-Powered Digital Tachometers And Signal Generator Available
1987/05/01

Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group
1987/07/01

New Service Tools Available
1987/08/01

Fluid Sampling Tools For Nonpressurized Compartments
1988/03/01

Extraction Tools For "Live Oil Sampling"
1988/05/01

New Service Tools Available
1988/10/01

Vibration Measurement System For Caterpillar Products
1989/06/01

New 4C5084 Oil Filter Cutter Replaces Former 6V7905 Filter Cutter
1990/11/01

Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts
1991/01/01

Cylinder Pack Puller Groups Improved
1993/01/01

Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems
1977/10/12

5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18

Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool
1978/03/01

Caterpillar Electronic Technician (Cat ET) 2001B-Service Pack 1 Software Upgrade is Now Available {0785}
2002/02/01

Calibration Fluid for Fuel Nozzle Test Equipment Is Available {0782, 1251, 1254, 1290, 1713}
2008/11/17

Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01

Special Instruction

Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement^*{0781, 0782}

Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement^*{0781, 0782}

Troubleshooting And Repair Of The 1P3500 And 2P8280 Injection Timing Groups{0782}
Troubleshooting And Repair Of The 1P3500 And 2P8280 Injection Timing Groups{0782}

Using The 5P-4150 Nozzle Testing Group{0782}
Using The 5P-4150 Nozzle Testing Group{0782}

Use of Piston Pin Bearing Removal and Installation Tools{1218}
Use of Piston Pin Bearing Removal and Installation Tools{1218}

Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 4S6553 Engine Evaluation Test Group{0781}

Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}
Installation Of 6V124 Drive Coupling Modification Kit{0650, 0706, 1250}

Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}

6V2150 Starting And Charging Analyzer Operating InstructionsFor More Information See Special Instruction SEHS7768{1406, 7569}
6V2150 Starting And Charging Analyzer Operating InstructionsFor More Information See Special Instruction SEHS7768{1406, 7569}

Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}

Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}

Using The 6V4950 Injection Line Speed Pickup Group{0782}
Using The 6V4950 Injection Line Speed Pickup Group{0782}

Use of 6V7020 Nozzle Puller Group{0621}
Use of 6V7020 Nozzle Puller Group{0621}

Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}

Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}
Use And Repair Of The 6V7925 Fuel Rate Indicator{0782}

Using 8S2305, 9S228, And 6V9128 Rack Position Tool Groups{0782, 1250}
Using 8S2305, 9S228, And 6V9128 Rack Position Tool Groups{0782, 1250}

Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}

Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}

Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}

Using The 8T1000 Position Indicator Group{0760, 0762}
Using The 8T1000 Position Indicator Group{0760, 0762}

Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}

Using the 1U6602 Photo-Tach Group{0775}
Using the 1U6602 Photo-Tach Group{0775}

Using the 1U5470 Engine Pressure Group{0781}
Using the 1U5470 Engine Pressure Group{0781}

Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}

Using the 4C6821 Injection Line Speed Pickup Group{0781}
Using the 4C6821 Injection Line Speed Pickup Group{0781}

Use Of 3P2200 Calibration Tool Group{0650, 1250}
Use Of 3P2200 Calibration Tool Group{0650, 1250}

Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}

Operation And Maintenance Of 1P3060 Pyrometer Group{0776}
Operation And Maintenance Of 1P3060 Pyrometer Group{0776}

Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}

Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}

Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}

Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}

Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}

Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}

Using The 6V7899 Size Setting Fixture Group{651}
Using The 6V7899 Size Setting Fixture Group{651}

Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}

Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}

7000 Series Nozzles{0782}
7000 Series Nozzles{0782}

Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}

Tool and Specification Chart for Inverted Duo-Cone Seals {0599, 7561}
Tool and Specification Chart for Inverted Duo-Cone Seals {0599, 7561}

Using Caterpillar Replacement Thread Inserts {0676}
Using Caterpillar Replacement Thread Inserts {0676}

Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}

Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}
Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}

Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Tool Operating Manual

Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes

Instructions for 1U9801 Ultrasonic Wear Indicator Program Module Replacement{0767}
Instructions for 1U9801 Ultrasonic Wear Indicator Program Module Replacement{0767}

9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}

Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}

358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}

Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}

NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}

9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}
9U-7840 Fuel Injection Equipment Calibration Fluid Test Kit{0374, 0599, 0706}

370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}

NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}

185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}

456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}

20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}

464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}
464-0265 Lifting Bracket Assembly{0374, 0599, 0629, 0632, 0700, 0708, 1353}

General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}
General Usage for all Shackle Types{0374, 0599, 0629, 0632, 1122, 6459, 7000}

442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}

Zip-Tie Installation Guide{0374, 0599, 7000}
Zip-Tie Installation Guide{0374, 0599, 7000}

NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}

{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}

NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}

M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}

Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}

Reuse And Salvage Guidelines

Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}

Dynamometer Testing of Caterpillar Engines {0781, 1000}
Dynamometer Testing of Caterpillar Engines {0781, 1000}

Using Lock-N-Stitch Procedures for Casting Repair {0676, 0685}
Using Lock-N-Stitch Procedures for Casting Repair {0676, 0685}

Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}

Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}

Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}

Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}
Caterpillar Service Welding Guide {0374, 0599, 0677, 0678, 0679}

Fundamentals of HVOF Spray for Reconditioning Components {0599, 0679, 1000, 7000}
Fundamentals of HVOF Spray for Reconditioning Components {0599, 0679, 1000, 7000}

Fundamentals of Flame Spray for Reconditioning Components {0100, 0599, 0679}
Fundamentals of Flame Spray for Reconditioning Components {0100, 0599, 0679}

Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Bench Test Procedures

Dynamometer Testing of Caterpillar Engines {0781, 1000}
Dynamometer Testing of Caterpillar Engines {0781, 1000}

Technical Analysis

Technical Analysis 1 (TA1) Visual Inspection for Industrial Engine {0372, 1000, 7000, 753S, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Industrial Engine {0372, 1000, 7000, 753S, 7565}

Service Magazine

6V2050 Tapered Rod Tool Group Available For Removal And Installation Of Bearings{1219,1218,1214}
1980/06/09

Use The 6V2056 Rod And 6V2057 Point To Find True Top Center{0653}
1980/07/14

6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02

Use Two Wrenches On Fuel Line Nuts{1254,1252}
1981/04/13

FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13

Use 6V4089 Reamer Assembly To Clean Nozzle Bores{0622}
1981/04/27

Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/05/18

Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17

Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18

New Engine Testing And Adjusting Tools Give More Accuracy And Longer Service Life{0651}
1982/02/01

New 6V4818 Driver Available To Install Rack Bearings In Fuel Injection Pump Housings{0622}
1982/02/08

Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22

Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03

Separate Valve Stem Gauges Available{0653,1000}
1982/06/07

New Address For Repair Of Diagnostic Tools{0650}
1982/06/14

6V6124 Calibration Coil Available To Calibrate And Check 6V4910 AC/DC Clamp-On Ammeter{0651}
1982/06/28

Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16

Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06

Dial Bore Gauge And Size Setting Fixture Available{0653}
1982/09/20

Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11

6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01

Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08

Make Change To 6V2100 Multitach And 5P9698 Calibrator{0651}
1982/11/15

Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22

New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29

Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16

Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27

Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03

Higher Torque Can Be Used With 6V6980 Nozzle Puller Group{0706,1254}
1985/06/10

Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07

Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13

Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16

New Engine Timing Indicator Group Available {0781,0782}
1986/07/07

New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27

Use Gas Detector Tubes That Have Expired Dates To "Break In" The Combustion Chambers For The Fuel Sulphur Analyzer Group{0651}
1986/11/10

Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15

New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17

New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17

New 5P7307 Engine Turning Tool Group Fits All Engines{0611}
1977/02/14

Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18

Tools To Install Crankshaft Seal And Wear Sleeve{1160,1161,0622}
1977/07/11

Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22

Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26

Troubleshooting The Tachometer System Of The 4S6553 Engine Instrument Group{0651}
1977/10/10

Fabricated Extension Prevents Fuel "Splash" During Injection Valve Testing{0650,1254}
1977/10/17

Assembly Procedure For The 5P4721 Tube (Part Of The 5P4149 Conversion Group And 5P4150 Nozzle Testing Group){0650}
1977/10/24

With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31

New 8T5261 Bushing Installer And Remover Adapter Tool Available{0600}
1987/03/02

Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16

5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23

Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11

The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11

Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11

New 1U5524 Adapter Cable Available For Use With 6V9060 Spark Timing Adapter Group And 8T5300 Engine Timing Indicator Group{0779,0781}
1987/07/06

Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20

5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09

Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06

Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool{1361,0622}
1978/02/13

5P4149 Conversion Group To Become A Discontinued Item On October 1, 1978{0650,1254}
1978/03/27

Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17

Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24

Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24

New 5P8744 Adapter Assembly And Special Instruction Procedures For 5P4150 Nozzle Tester Group{0650}
1978/08/28

New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11

Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25

Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25

4J7533 O-Ring Seals Now Available For Parts Service Of The 5P4150 Nozzle Tester Group{0651}
1978/10/09

Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16

Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16

New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04

Extraction Tools For "Live Oil Sampling"{7770,0770,0781,0783,0784}
1988/04/18

Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18

New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23

Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06

Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12

A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing{0626}
1979/01/08

New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08

Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22

2P8316 Dowel Now Available For Parts Service{0652}
1979/04/30

9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28

6V183 Gasket Now Available For Parts Service To Use On 5P4150 Or 8S2242 Nozzle Tester{0651}
1979/06/25

Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02

Caution Label Added To 5P4150 Nozzle Testing Group{0651}
1979/07/09

Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06

Splash Shields Added To Caterpillar Fuel Injection Test Bench{0652}
1979/08/13

Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03

Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10

Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08

Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29

Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18

New Hydraulic Wrenches and Pumps {0602, 0615}
2000/06/05

Diagnostic Cables and Harnesses Are Available {0785}
2014/08/11

Caterpillar Electronic Technician (Cat ET) 2001B-Service Pack 1 Software Upgrade is Now Available {0785}
2002/02/11

Thermocouple Assembly (Exhaust) Measures Engine Exhaust Temperatures {0701, 0776, 0781}
2004/04/01

40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16

Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}

A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}

A New Tool Operating Manual for Proper Zip-Tie Installation Is Now Available for All Caterpillar Products {0374, 0599, 7000}
2015/08/10

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

WARRANTY

Engine News

How To Obtain Correct Delivery Date For Warranty Claims
1978/10/18

Provide Proper Documentation of Returned Parts within the Warranty Claim {1000}
2004/05/01

Service Magazine

Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14

SERVICE GP

Tool Operating Manual

20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}

Service Magazine

SERVICE CENTER GP

Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08

KIT-REBUILD

Special Instruction

Using Caterpillar Replacement Thread Inserts {0676}
Using Caterpillar Replacement Thread Inserts {0676}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Reuse And Salvage Guidelines

Service Magazine

Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03

Truck sale:

Caterpillar 3306B
- Stationary Generator Sets
THOMPSON MACHINERY COMMERCE CORPORATION

41,500

Caterpillar 3306B, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC

33,500

Caterpillar 3306B, Stationary Generator Sets, Construction
- Stationary Generator Sets
RING POWER CORP.

38.001

Caterpillar D3306BEP, Stationaire Generatorsets, Bouw
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY

Caterpillar 3306B, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
RING POWER CORP.