AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2W-3556 TURBOCHARGER GP S/N 7JB2222-UP PART OF 2W-1576 TURBOCHARGER GP 3306B INDUSTRIAL ENGINE


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
FUEL SYSTEM
PUMP GP-FUEL INJECTION

INDUSTRIAL ENGINE 3306B INDUSTRIAL ENGINE 7JB
 3306B Industrial Engine 7JB00001-UP SEBP1451 3306B 7JB   (1983)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
TURBOCHARGER GP
2W-1744 TURBOCHARGER GP
TURBOCHARGER GP
2W-3214 TURBOCHARGER GP
TURBOCHARGER GP
2W-3556 TURBOCHARGER GP
TURBOCHARGER GP
2W-7277 TURBOCHARGER GP
TURBOCHARGER GP
7C-2989 TURBOCHARGER GP
TURBOCHARGER GP
7C-7578 TURBOCHARGER GP
 

#SEBP14510340
 

2W-3556: TURBOCHARGER GP

2W-3556 TURBOCHARGER GP
S/N 7JB2222-UP
PART OF 2W-1576 TURBOCHARGER GP
i00358769 SEBP1451
2W3556 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3306B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-3557 [1] HOUSING AS-COMPRESSOR  
2. 3S-5129 [1] CLAMP AS (COMPRESSOR)  
3. 2W-3558 Y [1] CARTRIDGE GP-TURBOCHARGER  
4. 6N-9906 [1] HOUSING AS-TURBINE  
  3B-0645 B [3] PLUG-CUP (31.75MM OD)  
  4N-0932 B [4] PLUG-CUP (57.15MM OD)  
  3P-1896 B [3] PLUG-CUP (34.92MM OD)  
  100-6816 B [4] PLUG-CUP (60.32MM OD)  
5. 1B-5174 [5] PLUG-PIPE  
6. 9N-2038 [1] CLAMP AS-TURBINE  
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14510341
 

2W-7277: TURBOCHARGER GP

2W-7277 TURBOCHARGER GP
S/N 7JB1210-UP
PART OF 1W-8096 TURBOCHARGER GP
i00360284 SEBP1451
2W7277 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3306B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-1604 Y [1] CARTRIDGE GP-TURBOCHARGER  
2. 1W-4795 [1] PLATE-IDENTIFICATION (TURBOCHARGER CARTRIDGE)  
  2F-0808 [2] SCREW (6X0.25-IN)  
3. 1W-1602 [1] HOUSING AS-COMPRESSOR  
4. 1W-3559 [1] HOUSING  
5. 3S-5129 [1] CLAMP AS (COMPRESSOR)  
6. 9N-2038 [1] CLAMP AS-TURBINE  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14510342
 

7C-2989: TURBOCHARGER GP

7C-2989 TURBOCHARGER GP
S/N 7JB2391-UP
i00404260 SEBP1451
7C2989 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3306B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-7582 Y [1] TURBOCHARGER GP  
2. 1S-4295 [1] GASKET (TURBOCHARGER)  
3. 7L-3195 [4] BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN)  
4. 2N-2766 [4] LOCKNUT (3/8-16-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP14510343
 

7C-7578: TURBOCHARGER GP

7C-7578 TURBOCHARGER GP
PART OF 7N-1680 TURBOCHARGER GP
AN ATTACHMENT
i00388639 SEBP1451
7C7578 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3306B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-7596 Y [1] CARTRIDGE GP-TURBOCHARGER  
2. 4W-7353 [1] HOUSING-COMPRESSOR  
3. 4W-7339 [1] HOUSING  
4. 7W-7778 [1] CLAMP AS (COMPRESSOR)  
5. 5S-4517 [1] CLAMP AS (TURBINE)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14510344
 

7C-7582: TURBOCHARGER GP

7C-7582 TURBOCHARGER GP
S/N 7JB2391-UP
PART OF 7C-2989 TURBOCHARGER GP
i00388680 SEBP1451
7C7582 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3306B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-7598 Y [1] CARTRIDGE GP-TURBOCHARGER  
2. 7W-8842 [1] HOUSING-COMPRESSOR  
3. 7C-2999 [1] HOUSING  
4. 7W-7778 [1] CLAMP AS (COMPRESSOR)  
5. 5S-4517 [1] CLAMP AS (TURBINE)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14510345
 

7N-1680: TURBOCHARGER GP

7N-1680 TURBOCHARGER GP
AN ATTACHMENT
i00408347 SEBP1451
7N1680 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3306B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-7578 Y [1] TURBOCHARGER GP  
2. 7M-7273 [1] GASKET  
3. 7L-3195 [4] BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN)  
  2N-2766 [4] LOCKNUT (3/8-16-THD)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14510346
 

7N-7748: TURBOCHARGER GP

7N-7748 TURBOCHARGER GP
S/N 7JB1891-UP
PART OF 8N-2669 TURBOCHARGER GP
i00410677 SEBP1451
7N7748 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3306B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-7746 [1] HOUSING-COMPRESSOR  
2. 1P-0715 [4] PLATE-CLAMP  
3. 0S-1614 [8] BOLT (1/4-20X0.5-IN)  
  3B-4504 [8] LOCKWASHER  
4. 7N-7750 Y [1] CARTRIDGE GP-TURBOCHARGER  
5. 7N-7747 [1] HOUSING  
6. 6N-1523 [2] LOCK  
  6N-1522 [2] PLATE-CLAMP  
7. 6N-2145 [4] BOLT  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14510347
 

8N-2669: TURBOCHARGER GP

8N-2669 TURBOCHARGER GP
S/N 7JB1891-UP
i00429941 SEBP1451
8N2669 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3306B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-7748 Y [1] TURBOCHARGER GP  
2. 9L-2295 [2] BOLT-HIGH TEMPERATURE (3/8-16X1.5-IN)(3/8-16X1.5IN)  
3. 2N-2766 [4] LOCKNUT (3/8-16-THD)  
4. 7L-6443 [2] BOLT-HIGH TEMPERATURE (3/8-16X2.25-IN)  
5. 1P-0451 [1] GASKET  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14510348
 

2W-0255: CAMSHAFT AS

2W-0255 CAMSHAFT AS
S/N 7JB1210-UP
PART OF 2W-0256 PUMP GP-FUEL INJECTION
i00188663 SEBP1451
2W0255 CAMSHAFT AS Parts scheme
  For full view, you need register

Parts for your 3306B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-2510 [1] SHAFT-WEIGHT CARRIER  
2. 7N-7264 [4] WEIGHT-GOVERNOR  
3. 9Y-7037 [4] BOLT (1/4-20X1.25-IN)  
4. 1S-5440 [4] DOWEL  
5. 4N-9019 [1] DOWEL  
6. 8N-2511 [1] CARRIER-WEIGHT  
7. 2W-0254 [1] CAMSHAFT-FUEL PUMP  
8. 7N-7166 [2] RACE-THRUST BEARING  
9. 7L-3326 [1] BEARING-THRUST  
10. 7N-7265 [1] SHIELD-WEIGHT CARRIER  
 

#SEBP14510349
 

8N-2513: CAMSHAFT AS

8N-2513 CAMSHAFT AS
PART OF 8N-2525 PUMP GP-GOV & FUEL INJ
i00429762 SEBP1451
8N2513 CAMSHAFT AS Parts scheme
  For full view, you need register

Parts for your 3306B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-2510 [1] SHAFT-WEIGHT CARRIER  
2. 7N-7264 [4] WEIGHT-GOVERNOR  
3. 9Y-7037 [4] BOLT (1/4-20X1.25-IN)  
4. 1S-5440 [4] DOWEL  
5. 4N-9019 [1] DOWEL  
6. 8N-2511 [1] CARRIER-WEIGHT  
7. 1W-2555 [1] CAMSHAFT-FUEL PUMP  
8. 7N-7166 [2] RACE-THRUST BEARING  
9. 7L-3326 [1] BEARING-THRUST  
10. 7N-7265 [1] SHIELD-WEIGHT CARRIER  
 

Information:

Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Add Chamfer To Cartridge Assembly Bearings To Prevent Oil Leakage
1977/12/14
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2004/04/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
Packaging the Turbocharger {1052}
2007/02/26
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
2W722 Turbocharger Cartridge Repair Kit{1053}
2W722 Turbocharger Cartridge Repair Kit{1053}
2W715 Turbocharger Cartridge Repair Kit{1053}
2W715 Turbocharger Cartridge Repair Kit{1053}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Turbochargers
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Turbocharger
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Turbocharger (AiResearch T04)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Turbocharger (Schwitzer 3LM)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Turbocharger (AiResearch TW61)
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Turbocharger
3304B & 3306B MARINE ENGINES
Turbocharger (AiResearch T04 or TW4)
3304B & 3306B MARINE ENGINES
Turbocharger (AiResearch TW61)
3304B & 3306B MARINE ENGINES
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Add Chamfer To Cartridge Assembly Bearings To Prevent Oil Leakage{1052,1053}
1977/11/21
Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 3306B :

TURBOCHARGER GP
2W-3214 TURBOCHARGER GP
TURBOCHARGER GP
2W-1744 TURBOCHARGER GP
TURBOCHARGER GP
2W-1576 TURBOCHARGER GP
TURBOCHARGER GP
219-9710 TURBOCHARGER GP
TURBOCHARGER GP
219-1911 TURBOCHARGER GP
TURBOCHARGER GP
1W-8097 TURBOCHARGER GP
TURBOCHARGER GP
1W-8097 TURBOCHARGER GP
TURBOCHARGER GP
1W-8096 TURBOCHARGER GP
TURBOCHARGER GP
2W-7277 TURBOCHARGER GP
TURBOCHARGER GP
7C-2989 TURBOCHARGER GP
TURBOCHARGER GP
7C-7578 TURBOCHARGER GP
TURBOCHARGER GP
7C-7582 TURBOCHARGER GP
TURBOCHARGER GP
7N-1680 TURBOCHARGER GP
TURBOCHARGER GP
7N-7748 TURBOCHARGER GP
TURBOCHARGER GP
8N-2669 TURBOCHARGER GP
CAMSHAFT AS
2W-0255 CAMSHAFT AS

Truck sale:

Caterpillar 3306B
 
Caterpillar 3306B
- Stationary Generator Sets
THOMPSON MACHINERY COMMERCE CORPORATION
 
41,500 
Caterpillar 3306B, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar 3306B, Stationary Generator Sets, Construction
33,500 
Caterpillar 3306B, Stationary Generator Sets, Construction
- Stationary Generator Sets
RING POWER CORP.
Caterpillar D3306BEP, Stationaire Generatorsets, Bouw
38.001 
Caterpillar D3306BEP, Stationaire Generatorsets, Bouw
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3306B, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
 
Caterpillar 3306B, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
RING POWER CORP.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.