AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4P-9827 PUMP GP-FUEL INJECTION S/N 7JB10024-UP PART OF 111-3769, 115-9595, 120-9296, 131-2744 PUMP GP-FUEL INJECTION ALSO AN ATTACHMENT 3306B


FUEL SYSTEM
PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING

INDUSTRIAL ENGINE 3306B INDUSTRIAL ENGINE 7JB
 3306B Industrial Engine 7JB00001-UP SEBP1451 3306B 7JB   (1983)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
1W-6539 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
2W-0256 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4P-9827 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
6I-2831 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
6I-2833 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
6I-2834 PUMP GP-FUEL INJECTION
 

#SEBP14510430
 

4P-9827: PUMP GP-FUEL INJECTION

4P-9827 PUMP GP-FUEL INJECTION
S/N 7JB10024-UP
PART OF 111-3769, 115-9595, 120-9296, 131-2744 PUMP GP-FUEL INJECTION
ALSO AN ATTACHMENT
i00188774 SEBP1451
4P9827 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3306B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-1927 [1] RING-RETAINING  
2. 8N-1415 [1] SPRING-CHECK  
3. 6I-1327 [1] BONNET-VALVE  
4. 1W-6987 [1] VALVE AS-CHECK  
5. 4P-9830 [1] PLUNGER AS  
6. 7C-5278 [1] BOLT-PLUNGER GEAR (FUEL PUMP)  
7. 7N-1066 [1] WASHER-RETAINING  
8. 7C-9966 [1] INSERT  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP14510431
 

6I-2831: PUMP GP-FUEL INJECTION

6I-2831 PUMP GP-FUEL INJECTION
S/N 7JB2391-UP
PART OF 7W-7899 PUMP GP-GOV & FUEL INJ
i00190076 SEBP1451
6I2831 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3306B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [2] PLUG  
  4J-7533 [2] SEAL-O-RING  
2. 1W-3286 [1] RACK-REGULATOR  
3. 0S-1615 [4] BOLT (1/4-20X0.75-IN)  
4. 7W-5928 Y [6] PUMP GP-FUEL INJECTION  
5. 8N-5117 [6] BUSHING-TERMINAL  
6. 114-8718 [6] SEAL-O-RING  
7. 4W-6869 [6] SPACER (27X32.54X5.049-MM THK)  
8. 7N-1047 [1] COVER-TIMING  
  7N-1046 [1] GASKET-COVER  
9. 7N-8421 [1] RING-RETAINING  
10. 8N-2487 [1] WASHER-THRUST  
11. 4P-9832 [6] LIFTER AS  
12. 4P-9840 [1] HOUSING AS  
13. 1S-1953 [1] BEARING-RACK (REAR)  
14. 1W-3285 [1] BEARING-RACK (FRONT)  
15. 4P-8480 [6] PIN-PUMP GUIDE  
16. 6I-0979 [6] DOWEL  
17. 4P-9828 [1] BUSHING  
18. 7N-7970 [1] BUSHING  
19. 4P-9027 [1] CAMSHAFT AS  
  6I-2840 [1] CAMSHAFT-FUEL PUMP  
20. 7N-7264 [4] WEIGHT-GOVERNOR  
21. 9Y-7037 [4] BOLT (1/4-20X1.25-IN)  
22. 1S-5440 [4] DOWEL (DIM 4.755MM)  
23. 4N-9019 [1] DOWEL (DIM 3.175MM)  
24. 7E-3986 [1] CARRIER-WEIGHT  
25. 7L-3326 [1] BEARING-THRUST  
26. 8N-2510 [1] SHAFT-WEIGHT CARRIER  
27. 7N-7166 [2] RACE-THRUST BEARING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14510432
 

6I-2833: PUMP GP-FUEL INJECTION

6I-2833 PUMP GP-FUEL INJECTION
S/N 7JB2222-UP
PART OF 2W-6275 PUMP GP-GOV & FUEL INJ
i00395247 SEBP1451
6I2833 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3306B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [2] PLUG  
2. 4J-7533 [2] SEAL-O-RING  
3. 1W-3286 [1] RACK-REGULATOR  
4. 1W-6539 Y [6] PUMP GP-FUEL INJECTION  
5. 8N-5117 [6] BUSHING-TERMINAL  
6. 114-8718 [6] SEAL-O-RING  
7. 4W-6869 [6] SPACER (27X32.54X5.049-MM THK)  
8. 7N-1046 [1] GASKET-COVER  
9. 7N-8421 [1] RING-RETAINING  
10. 8N-2487 [1] WASHER-THRUST  
11. 4P-9832 [6] LIFTER AS  
12. 0S-1615 [4] BOLT (1/4-20X0.75-IN)  
13. 7N-1047 [1] COVER-TIMING  
14. 4P-9021 [1] CAMSHAFT AS  
  6I-2841 [1] CAMSHAFT-FUEL PUMP  
15. 8N-2510 [1] SHAFT-WEIGHT CARRIER  
16. 7N-7264 [4] WEIGHT-GOVERNOR  
17. 9Y-7037 [4] BOLT (1/4-20X1.25-IN)  
18. 1S-5440 [4] DOWEL  
19. 7E-3986 [1] CARRIER-WEIGHT  
20. 7N-7166 [2] RACE-THRUST BEARING  
21. 7L-3326 [1] BEARING-THRUST  
22. 4P-9019 [1] STATOR GP-MAIN  
23. 4P-9840 [1] HOUSING AS  
24. 1W-3285 [1] BEARING-RACK  
25. 1S-1953 [1] BEARING-RACK  
26. 6I-0979 [6] DOWEL  
27. 7N-7970 [1] BUSHING  
28. 4P-9828 [1] BUSHING  
29. 4P-8480 [6] PIN-PUMP GUIDE  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14510433
 

6I-2834: PUMP GP-FUEL INJECTION

6I-2834 PUMP GP-FUEL INJECTION
S/N 7JB1210-UP
PART OF 2W-1078 PUMP GP-GOV & FUEL INJ
i00188938 SEBP1451
6I2834 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3306B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [2] PLUG  
  4J-7533 [2] SEAL-O-RING  
2. 1W-3286 [1] RACK-REGULATOR  
3. 0S-1615 [4] BOLT (1/4-20X0.75-IN)  
4. 1W-6539 Y [6] PUMP GP-FUEL INJECTION  
5. 8N-5117 [6] BUSHING-TERMINAL  
6. 114-8718 [6] SEAL-O-RING  
7. 4W-6869 [6] SPACER (27X32.54X5.049-MM THK)  
8. 7N-1047 [1] COVER-TIMING  
  7N-1046 [1] GASKET-COVER  
9. 7N-8421 [1] RING-RETAINING  
10. 8N-2487 [1] WASHER-THRUST  
11. 4P-9832 [6] LIFTER AS  
12. 4P-9840 [1] HOUSING AS  
13. 1S-1953 [1] BEARING-RACK  
14. 1W-3285 [1] BEARING-RACK  
15. 4P-8480 [6] PIN-PUMP GUIDE  
16. 6I-0979 [6] DOWEL  
17. 4P-9828 [1] BUSHING  
18. 7N-7970 [1] BUSHING  
19. 4P-9028 [1] CAMSHAFT AS  
  6I-2842 [1] CAMSHAFT-FUEL PUMP  
20. 7N-7264 [4] WEIGHT-GOVERNOR  
21. 9Y-7037 [4] BOLT (1/4-20X1.25-IN)  
22. 1S-5440 [4] DOWEL  
23. 4N-9019 [1] DOWEL  
24. 7E-3986 [1] CARRIER-WEIGHT  
25. 7L-3326 [1] BEARING-THRUST  
26. 8N-2510 [1] SHAFT-WEIGHT CARRIER  
27. 7N-7166 [2] RACE-THRUST BEARING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14510434
 

7W-5928: PUMP GP-FUEL INJECTION

7W-5928 PUMP GP-FUEL INJECTION
S/N 7JB2391-UP
PART OF 6I-2831 PUMP GP-FUEL INJECTION, 7W-5932 PUMP GP-GOV & FUEL INJ
OPTIONAL FIELD REPLACEMENT ORDER 432-8277 PUMP GP-FUEL INJECTION
i00189026 SEBP1451
7W5928 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3306B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-1927 [1] RING-RETAINING  
2. 8N-1415 [1] SPRING-CHECK  
3. 1W-9171 [1] BONNET-VALVE  
4. 1W-6987 [1] VALVE AS-CHECK  
5. 7W-5929 [1] PLUNGER & BARREL AS (FUEL PUMP)  
6. 8H-9299 [1] SCREW-PLUNGER GEAR  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP14510435
 

8N-2517: PUMP GP-FUEL INJECTION

8N-2517 PUMP GP-FUEL INJECTION
PART OF 8N-2525 PUMP GP-GOV & FUEL INJ
i00429788 SEBP1451
8N2517 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3306B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1M-3506 [1] RING-RETAINING  
2. 8N-1415 [1] SPRING-CHECK  
3. 8N-2516 [1] BONNET-VALVE  
4. 8N-1414 [1] CHECK AS-PUMP  
5. 8N-9130 [1] PLUNGER AS  
6. 7N-1067 [1] SPRING-LIFTER  
7. 7N-1415 [1] WASHER-RETAINING  
 

#SEBP14510436
 

145-1221: PUMP GP-FUEL PRIMING

145-1221 PUMP GP-FUEL PRIMING
AN ATTACHMENT
i01207560 SEBP1451
1451221 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3306B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 128-8557 [1] BASE AS-FILTER (PRIMARY FUEL FILTER)  
  7E-5346 [1] VALVE AS  
2. 129-0372 [1] FILTER AS-WATER SEP & FUEL  
  129-0373 [1] ELEMENT-WATER SEPARATOR  
  129-0375 [1] BOWL AS-WATER COLLECTION  
  141-0284 [1] KIT-FUEL FILTER & WATER SEP  
    (INCLUDES SEAL & GASKET)
3. 105-2508 [1] PUMP AS-FUEL PRIMING  
4. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
5. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
6. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
7. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
8. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
9. 9S-8002 [4] PLUG (7/16-20-THD)  
10. 6V-5048 [4] SEAL-O-RING  
11. 0S-1588 [1] BOLT (3/8-16X1.25-IN)  
12. 036-7222 [1] STUD  
13. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
14. 030-8194 [1] CONNECTOR  
15. 2M-9780 [1] SEAL-O-RING  
16. 6V-8801 [1] NUT (3/8-16-THD)  
 

#SEBP14510437
 

4W-1876: PUMP GP-FUEL PRIMING

4W-1876 PUMP GP-FUEL PRIMING
S/N 7JB1349-1461; 7JB1891-UP
i00378284 SEBP1451
4W1876 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3306B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-7089 [1] BASE-FUEL PRIMING PUMP  
2. 4W-0788 C [1] PUMP AS-FUEL PRIMING  
3. 1P-0436 C [2] GASKET (FUEL PRIMING PUMP)  
4. 1A-2029 [1] BOLT (3/8-16X1.125-IN)  
5. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 0T-0055 [1] BOLT (3/8-16X4.25-IN)  
7. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
8. 9M-1974 C [2] WASHER-HARD (8.8X16X2-MM THK)  
9. 7B-2742 C [1] BOLT (1/4-20X1.25-IN)  
10. 5P-0537 C [2] WASHER-HARD (7.2X14.5X2-MM THK)  
11. 030-8194 [1] CONNECTOR  
12. 2M-9780 [1] SEAL-O-RING (19.18MM ID)  
13. 0S-1618 C [1] BOLT (5/16-18X1-IN)  
14. 4F-7957 C [1] BOLT (1/4-20X0.875-IN)  
15. 8N-3573 C [1] COVER  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14510438
 

4W-1876: PUMP GP-FUEL PRIMING

4W-1876 PUMP GP-FUEL PRIMING
S/N 7JB10289-UP
i00378086 SEBP1451
4W1876 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3306B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-8834 C [1] BASE-FUEL PRIMING PUMP  
2. 137-5541 [1] PUMP GP-FUEL PRIMING (HAND)  
3. 1P-0436 [2] GASKET (FUEL PRIMING PUMP)  
4. 0S-1588 [1] BOLT (3/8-16X1.25-IN)  
5. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 0T-0055 [1] BOLT (3/8-16X4.25-IN)  
7. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
8. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
9. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
10. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
11. 030-8194 [1] CONNECTOR  
12. 2M-9780 [1] SEAL-O-RING (19.18MM ID)  
13. 0S-1618 [1] BOLT (5/16-18X1-IN)  
14. 4F-7957 [1] BOLT (1/4-20X0.875-IN)  
15. 8N-3573 [1] COVER  
16. 1P-1669 [1] PLUG-SEAL  
17. 1W-6629 [1] TUBE AS-FUEL FILTER  
18. 3K-0360 [1] SEAL-O-RING  
19. 030-7947 [1] ADAPTER-ELBOW  
20. 3J-1907 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14510439
 

8N-3365: PUMP GP-FUEL PRIMING

8N-3365 PUMP GP-FUEL PRIMING
S/N 7JB1-1599
PART OF 8N-5251 PUMP GP-FUEL PRM & PRIM FILTER
i00187806 SEBP1451
8N3365 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3306B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
  5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
2. 4W-0788 [1] PUMP AS-FUEL PRIMING  
3. 9S-8003 [2] PLUG (1/2-20-THD)  
  1J-9671 [2] SEAL-O-RING  
4. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
  9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
5. 7E-5346 [1] VALVE AS  
6. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
7. 8N-0803 [1] BASE-FILTER  
 

Information:

Engine News
New Fuel Injection Nozzle Assembly Used
1980/01/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement
1981/04/22
Use 6V4089 Reamer Assembly To Clean Nozzle Bores
1981/05/20
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers
1981/06/03
Explanation Of Differences In Timing Advance Information
1981/08/26
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
Service Information For Woodward Governors
1983/10/26
Fill Oil Sump Before Installing Woodward Governor
1985/01/16
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Bolt Removed From Governor And Fuel Injection Pump Group
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles
1989/03/01
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque
1989/09/01
Governor Control Motor Polarity May Require A Change
1990/11/01
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/01
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN)
1992/04/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/01
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
New Fuel Nozzles Resist Adapter Cracking And Leaking {1254}
1999/06/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Do Not Reuse the Hold Down Bolts for the Fuel Injector {1290}
2006/05/29
The Edge Filter Is Now Removed from Fuel Nozzles {1254, 1290}
2007/08/20
Calibration Fluid for Fuel Nozzle Test Equipment Is Available {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Improved Manufacturing Processes Are Used for Remanufactured Fuel Injector Nozzles That Are Used in Certain Commercial Engines {1251, 1290}
2012/07/06
Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain Commercial Engines {1250, 1251, 1290, 1713}
2013/10/17
Cat® Reman Announces New Fuel Pump, Fuel Ratio Control, and Fuel Injector Options for Certain Engines {1251, 1278}
2014/09/05
Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Check Assembled Dimension for Rack Lever Travel{1264, 1250}
Check Assembled Dimension for Rack Lever Travel{1264, 1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles{1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Fuel Injection Pump
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzle
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Governor
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Lines<BR>
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Woodward PSG Governor
3304B & 3306B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Governor Control
3304B & 3306B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Fuel Injection Nozzles
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing &amp; Governor
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Governor
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Rocker Shaft Assembly &amp; Push Rods
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzles
3304B & 3306B MARINE ENGINES
Fuel Injection Pump Housing And Governor
3304B & 3306B MARINE ENGINES
Governor
3304B & 3306B MARINE ENGINES
Fuel Injection Pumps
3304B & 3306B MARINE ENGINES
Fuel Injection Pump Housing
3304B & 3306B MARINE ENGINES
Fuel Transfer Pump
3304B & 3306B MARINE ENGINES
Rocker Shaft Assembly And Push Rods
3304B & 3306B MARINE ENGINES
Rocker Shaft Assembly
3304B & 3306B MARINE ENGINES
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Use Two Wrenches On Fuel Line Nuts{1254,1252}
1981/04/13
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/05/18
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
New 6V4818 Driver Available To Install Rack Bearings In Fuel Injection Pump Housings{0622}
1982/02/08
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
New Torque Specification For Fuel Injection Pump Bushing{1251,1253}
1982/08/09
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Higher Torque Can Be Used With 6V6980 Nozzle Puller Group{0706,1254}
1985/06/10
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
New Bleed Screw Used In Fuel Injection Nozzle{1254}
1985/09/23
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Larger Diameter Holes Are Now Used In The Rocker Arm Shaft To Give More Oil Flow To Rocker Arm Bearings{1102}
1977/11/21
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Check Assembled Dimension For Rack Lever Travel If Governor Housing Assembly Is Replaced {1264}
1988/12/19
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing{0626}
1979/01/08
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
Governor Control Motor Polarity May Require A Change{1265,1408,7556}
1990/10/29
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Governor Control Cover Assembly Includes New Seal And Improved Cover {1264}
1997/07/07
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14

Caterpillar Parts SIS Catalog 3306B :

PUMP GP-FUEL INJECTION
2W-0256 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
1W-6539 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
131-2744 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
120-9296 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
115-9595 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
111-3769 PUMP GP-FUEL INJECTION
PUMP & MTG GP-FUEL TRANSFER
2W-4160 PUMP & MTG GP-FUEL TRANSFER
PROTECTION GP-FUEL SYSTEM
128-7984 PROTECTION GP-FUEL SYSTEM
PUMP GP-FUEL INJECTION
6I-2831 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
6I-2833 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
6I-2834 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7W-5928 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
8N-2517 PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING
145-1221 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
4W-1876 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
4W-1876 PUMP GP-FUEL PRIMING

Truck sale:

Caterpillar 3306B
 
Caterpillar 3306B
- Stationary Generator Sets
THOMPSON MACHINERY COMMERCE CORPORATION
 
41,500 
Caterpillar 3306B, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar 3306B, Stationary Generator Sets, Construction
33,500 
Caterpillar 3306B, Stationary Generator Sets, Construction
- Stationary Generator Sets
RING POWER CORP.
Caterpillar D3306BEP, Stationaire Generatorsets, Bouw
38.001 
Caterpillar D3306BEP, Stationaire Generatorsets, Bouw
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3306B, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
 
Caterpillar 3306B, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
RING POWER CORP.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.