AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

131-2649 PUMP GP-GOV & FUEL INJ S/N 7JB11701-UP 3306B INDUSTRIAL ENGINE


FUEL SYSTEM
GOVERNOR GP

INDUSTRIAL ENGINE 3306B INDUSTRIAL ENGINE 7JB
 3306B Industrial Engine 7JB00001-UP SEBP1451 3306B 7JB   (1983)

FUEL SYSTEM

GOVERNOR GP
GOVERNOR GP
2W-4107 GOVERNOR GP
PROTECTION GP-FUEL SYSTEM
128-7984 PROTECTION GP-FUEL SYSTEM
PUMP GP-GOV & FUEL INJ
131-2649 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
131-2650 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
131-2651 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
131-2652 PUMP GP-GOV & FUEL INJ
 

#SEBP14510450
 

131-2649: PUMP GP-GOV & FUEL INJ

131-2649 PUMP GP-GOV & FUEL INJ
S/N 7JB11701-UP
i00947469 SEBP1451
1312649 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5735 [1] LEVER AS-PIVOT  
  115-1249 [1] SETSCREW-SOCKET  
  8L-5832 [1] NUT-HEX (10-32-THD)  
2. 4W-5734 [1] LEVER AS  
  6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
3. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
  4B-2049 [1] NUT (10-32-THD)  
4. 8J-8343 [1] SEAL-O-RING  
5. 033-5879 [1] SEAL-O-RING  
6. 8N-5403 [1] SHAFT AS-THROTTLE  
7. 7N-9907 [1] COVER  
  150-3727 [1] GASKET-FUEL  
8. 131-2744 Y [1] PUMP GP-FUEL INJECTION  
9. 7N-2176 [1] PIN-DETENT  
10. 2W-9657 [1] SPRING-DETENT  
11. 7N-1052 [1] DOWEL  
12. 8N-7276 Y [1] TORQUE CONTROL GP  
13. 8L-9790 [1] SPRING  
14. 2W-5448 [1] COVER  
  144-0477 [1] GASKET  
15. 150-3726 [1] GASKET  
16. 8M-8515 [1] SEAL-O-RING  
17. 5P-6620 [1] SEAL-O-RING  
18. 8N-5784 [1] DEFLECTOR-PULSE  
19. 3J-1907 [1] SEAL-O-RING  
20. 2W-2410 Y [1] GOVERNOR GP  
21. 7C-8993 Y [1] FASTENER GP-FUEL INJ PUMP  
22. 111-5162 Y [1] CONTROL GP-FUEL RATIO  
23. 6V-5894 [2] BOLT (1/4-20X3.75-IN)  
24. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
25. 2D-6392 [1] SEAL-O-RING  
26. 8N-6680 [1] SCREEN AS  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14510451
 

131-2650: PUMP GP-GOV & FUEL INJ

131-2650 PUMP GP-GOV & FUEL INJ
S/N 7JB10024-UP
i00541072 SEBP1451
1312650 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-9595 Y [1] PUMP GP-FUEL INJECTION  
2. 8L-9790 [1] SPRING  
3. 7N-1052 [1] DOWEL  
4. 7N-2176 [1] PIN-DETENT  
5. 2W-9657 [1] SPRING-DETENT  
6. 8N-5403 [1] SHAFT AS-THROTTLE  
7. 4W-5735 [1] LEVER AS-PIVOT  
  8L-5832 [1] NUT-HEX (10-32-THD)  
  115-1249 [1] SETSCREW-SOCKET  
8. 8N-6680 [1] SCREEN AS  
9. 7C-8993 Y [1] FASTENER GP-FUEL INJ PUMP  
10. 8N-7276 Y [1] TORQUE CONTROL GP  
11. 2W-2410 Y [1] GOVERNOR GP  
12. 2W-5448 [1] COVER  
13. 8N-5784 [1] DEFLECTOR-PULSE  
14. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
15. 4B-2049 [1] NUT (10-32-THD)  
16. 7N-9907 [1] COVER  
17. 111-5162 Y [1] CONTROL GP-FUEL RATIO  
18. 6V-5894 [2] BOLT (1/4-20X3.75-IN)  
19. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
20. 2D-6392 [1] SEAL-O-RING  
21. 3J-1907 [1] SEAL-O-RING  
22. 5P-6620 [1] SEAL-O-RING  
23. 144-0477 [1] GASKET  
24. 150-3726 [1] GASKET  
25. 150-3727 [1] GASKET-FUEL  
26. 8J-8343 [1] SEAL-O-RING  
27. 8M-8515 [1] SEAL-O-RING  
28. 033-5879 [1] SEAL-O-RING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14510452
 

131-2651: PUMP GP-GOV & FUEL INJ

131-2651 PUMP GP-GOV & FUEL INJ
S/N 7JB10422-UP
i00974071 SEBP1451
1312651 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 111-3769 Y [1] PUMP GP-FUEL INJECTION  
2. 8L-9790 [1] SPRING  
3. 7N-1052 [1] DOWEL  
4. 7N-2176 [1] PIN-DETENT  
5. 2W-9657 [1] SPRING-DETENT  
6. 8N-5403 [1] SHAFT AS-THROTTLE  
7. 4W-5735 [1] LEVER AS-PIVOT  
  8L-5832 [1] NUT-HEX (10-32-THD)  
  115-1249 [1] SETSCREW-SOCKET  
8. 4W-5734 [1] LEVER AS  
  6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
9. 7C-8993 Y [1] FASTENER GP-FUEL INJ PUMP  
10. 8N-7276 Y [1] TORQUE CONTROL GP  
11. 2W-2410 Y [1] GOVERNOR GP  
12. 2W-5448 [1] COVER  
13. 8N-5784 [1] DEFLECTOR-PULSE  
14. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
15. 4B-2049 [1] NUT (10-32-THD)  
16. 7N-9907 [1] COVER  
17. 111-5162 Y [1] CONTROL GP-FUEL RATIO  
18. 6V-5894 [2] BOLT (1/4-20X3.75-IN)  
19. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
20. 2D-6392 [1] SEAL-O-RING  
21. 8N-6680 [1] SCREEN AS  
22. 144-0477 [1] GASKET  
23. 150-3726 [1] GASKET  
24. 8M-8515 [1] SEAL-O-RING  
25. 3J-1907 [1] SEAL-O-RING  
26. 5P-6620 [1] SEAL-O-RING  
27. 033-5879 [1] SEAL-O-RING  
28. 8J-8343 [1] SEAL-O-RING  
29. 150-3727 [1] GASKET-FUEL  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14510453
 

131-2652: PUMP GP-GOV & FUEL INJ

131-2652 PUMP GP-GOV & FUEL INJ
S/N 7JB11728-UP
AN ATTACHMENT
i01182695 SEBP1451
1312652 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 120-9296 Y [1] PUMP GP-FUEL INJECTION  
2. 8L-9790 [1] SPRING  
3. 7N-1052 [1] DOWEL  
4. 7N-2176 [1] PIN-DETENT  
5. 2W-9657 [1] SPRING-DETENT  
6. 8N-5403 [1] SHAFT AS-THROTTLE  
7. 4W-5735 [1] LEVER AS-PIVOT  
8. 6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
9. 8L-5832 [1] NUT-HEX (10-32-THD)  
10. 4W-5734 [1] LEVER AS  
  6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
12. 8N-6680 [1] SCREEN AS  
13. 7C-8993 Y [1] FASTENER GP-FUEL INJ PUMP  
14. 8N-7276 Y [1] TORQUE CONTROL GP  
15. 2W-2410 Y [1] GOVERNOR GP  
16. 2W-5448 [1] COVER  
17. 8N-5784 [1] DEFLECTOR-PULSE  
18. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
19. 4B-2049 [1] NUT (10-32-THD)  
20. 7N-9907 [1] COVER  
21. 111-5162 Y [1] CONTROL GP-FUEL RATIO  
22. 6V-5894 [2] BOLT (1/4-20X3.75-IN)  
23. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
24. 2D-6392 [1] SEAL-O-RING  
25. 3J-1907 [1] SEAL-O-RING  
26. 144-0477 [1] GASKET  
27. 5P-6620 [1] SEAL-O-RING  
28. 150-3726 [1] GASKET  
29. 8J-8343 [1] SEAL-O-RING  
30. 150-3727 [1] GASKET-FUEL  
31. 8M-8515 [1] SEAL-O-RING  
32. 033-5879 [1] SEAL-O-RING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14510454
 

2W-0058: PUMP GP-GOV & FUEL INJ

2W-0058 PUMP GP-GOV & FUEL INJ
S/N 7JB1-1599
i00360620 SEBP1451
2W0058 PUMP GP-GOV & FUEL INJ Parts scheme 2W0058 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-1066 [1] LEVER AS-PIVOT  
  8N-4109 LEVER AS  
2. 6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
3. 4B-2049 [1] NUT (10-32-THD)  
4. 2D-6392 [2] SEAL-O-RING  
5. 6M-5062 [1] SEAL-O-RING  
6. 8N-5403 [1] SHAFT AS-THROTTLE  
7. 6N-1716 [1] VALVE AS  
8. 7N-5334 [1] SETSCREW-SOCKET (25.4-MM LG)  
9. 7N-2176 [1] PIN-DETENT  
10. 8N-3093 [1] SPRING-DETENT  
11. 7N-1052 [1] DOWEL  
12. 1W-1597 Y [1] TORQUE CONTROL GP  
13. 8M-9140 [1] SPRING  
14. 2W-5448 [1] COVER  
  2W-5447 [1] GASKET  
15. 0S-1615 [2] BOLT (1/4-20X0.75-IN)  
16. 5D-6539 [1] SEAL-O-RING  
17. 5L-4758 [1] SEAL-O-RING  
18. 9S-4180 [1] PLUG  
19. 0S-1616 [2] BOLT (1/4-20X1-IN)  
20. 8N-3799 [1] COVER-FUEL RATIO  
21. 4B-2049 [1] NUT (10-32-THD)  
22. 2W-2410 CY [1] GOVERNOR GP  
23. 7N-8768 C [1] GASKET  
24. 8B-2377 BC [4] BOLT (1/4-20X2-IN)  
25. 8N-5784 C [1] DEFLECTOR-PULSE  
26. 0S-1614 C [3] BOLT (1/4-20X0.5-IN)  
27. 8N-2525 CY [1] PUMP GP-GOV & FUEL INJ  
28. 7N-9907 C [1] COVER  
29. 7N-9554 C [1] GASKET  
30. 4F-7957 C [6] BOLT (1/4-20X0.875-IN)  
31. 1B-2713 C [2] BOLT (1/4-20X1.75-IN)  
32. 4B-4276 C [2] WASHER (7X16X1.6-MM THK)  
33. 2S-7383 C [1] BOLT (1/4-20X3.25-IN)  
34. 6B-4198 C [2] BOLT (1/4-20X4.19-IN)  
35. 0S-1616 C [1] BOLT (1/4-20X1-IN)  
36. 8F-8178 C [2] BOLT (1/4-20X3.25-IN)  
37. 4N-1761 C [4] BOLT (1/4-20X6.5-IN)  
38. 9S-4191 C [1] PLUG (9/16-18-THD)  
39. 3J-1907 C [1] SEAL-O-RING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14510455
 

2W-1078: PUMP GP-GOV & FUEL INJ

2W-1078 PUMP GP-GOV & FUEL INJ
S/N 7JB1210-1613; 7JB1891-UP
i00357806 SEBP1451
2W1078 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
2. 033-5879 [1] SEAL-O-RING  
3. 8J-8343 [1] SEAL-O-RING  
4. 7N-5334 [1] SETSCREW-SOCKET (25.4-MM LG)  
  5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
5. 8N-3799 [1] COVER-FUEL RATIO  
6. 4W-5735 [1] LEVER AS-PIVOT  
7. 6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
8. 8L-5832 C [1] NUT-HEX (10-32-THD)  
9. 4W-5734 [1] LEVER AS  
  6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 C [1] NUT-HEX (10-32-THD)  
10. 2W-2410 Y [1] GOVERNOR GP  
11. 7N-8768 [1] GASKET  
12. 3J-1907 [1] SEAL-O-RING  
13. 2W-0256 Y [1] PUMP GP-FUEL INJECTION  
14. 0S-1616 C [2] BOLT (1/4-20X1-IN)  
15. 7C-8993 CY [1] FASTENER GP-FUEL INJ PUMP  
16. 7N-2176 [1] PIN-DETENT  
17. 7N-1052 [1] DOWEL  
18. 8N-3093 [1] SPRING-DETENT  
19. 8N-7276 Y [1] TORQUE CONTROL GP  
20. 8N-5784 C [1] DEFLECTOR-PULSE  
21. 8N-9594 [1] SPRING  
22. 8N-5403 [1] SHAFT AS-THROTTLE  
23. 2W-5448 [1] COVER  
  2W-5447 [1] GASKET  
24. 7N-9907 [1] COVER  
  7N-9554 [1] GASKET  
25. 8M-8515 [1] SEAL-O-RING  
26. 5P-6620 [1] SEAL-O-RING  
27. 8L-5832 [1] NUT-HEX (10-32-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14510456
 

2W-1078: PUMP GP-GOV & FUEL INJ

2W-1078 PUMP GP-GOV & FUEL INJ
S/N 7JB1891-UP
i00357809 SEBP1451
2W1078 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
2. 033-5879 [1] SEAL-O-RING  
3. 8J-8343 [1] SEAL-O-RING  
4. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
5. 8N-3799 [1] COVER-FUEL RATIO  
6. 4W-5735 [1] LEVER AS-PIVOT  
7. 6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
8. 8L-5832 [1] NUT-HEX (10-32-THD)  
9. 4W-5734 [1] LEVER AS  
  6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
10. 2W-2410 Y [1] GOVERNOR GP  
11. 7N-8768 [1] GASKET  
12. 3J-1907 [1] SEAL-O-RING  
13. 6I-2834 CY [1] PUMP GP-FUEL INJECTION  
14. 0S-1616 [2] BOLT (1/4-20X1-IN)  
15. 7C-8993 Y [1] FASTENER GP-FUEL INJ PUMP  
16. 7N-2176 [1] PIN-DETENT  
17. 7N-1052 [1] DOWEL  
18. 2W-9657 [1] SPRING-DETENT  
19. 8N-7276 Y [1] TORQUE CONTROL GP  
20. 8N-5784 [1] DEFLECTOR-PULSE  
21. 8N-9594 [1] SPRING  
22. 8N-5403 [1] SHAFT AS-THROTTLE  
23. 2W-5448 [1] COVER  
  7E-6785 [1] GASKET  
24. 7N-9907 [1] COVER  
  7N-9554 [1] GASKET  
25. 8M-8515 [1] SEAL-O-RING  
26. 5P-6620 [1] SEAL-O-RING  
27. 8L-5832 [1] NUT-HEX (10-32-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14510457
 

2W-6275: PUMP GP-GOV & FUEL INJ

2W-6275 PUMP GP-GOV & FUEL INJ
S/N 7JB1349-UP
i00359802 SEBP1451
2W6275 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING (6.07MM ID)  
2. 033-5879 [1] SEAL-O-RING (11.12MM ID)  
3. 8J-8343 [1] SEAL-O-RING (6.02MM ID)  
4. 7N-5334 [1] SETSCREW-SOCKET (25.4-MM LG)  
    -OR-
  5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
5. 8N-3799 [1] COVER-FUEL RATIO  
6. 4W-5735 [1] LEVER AS-PIVOT  
7. 6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
8. 8L-5832 C [1] NUT-HEX (10-32-THD)  
9. 4W-5734 [1] LEVER AS  
  6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 C [1] NUT-HEX (10-32-THD)  
10. 2W-2410 Y [1] GOVERNOR GP  
11. 7N-8768 [1] GASKET  
12. 3J-1907 [1] SEAL-O-RING (11.89MM ID)  
13. 8N-2525 Y [1] PUMP GP-GOV & FUEL INJ  
14. 0S-1616 C [2] BOLT (1/4-20X1-IN)  
15. 7C-8993 CY [1] FASTENER GP-FUEL INJ PUMP  
16. 7N-2176 [1] PIN-DETENT  
17. 7N-1052 [1] DOWEL  
18. 8N-3093 [1] SPRING-DETENT  
19. 8N-7276 Y [1] TORQUE CONTROL GP  
20. 8N-5784 C [1] DEFLECTOR-PULSE  
21. 8N-9594 [1] SPRING  
22. 8N-5403 [1] SHAFT AS-THROTTLE  
23. 2W-5448 [1] COVER  
  2W-5447 [1] GASKET  
24. 7N-9907 [1] COVER  
  7N-9554 [1] GASKET  
25. 8M-8515 [1] SEAL-O-RING (32.99MM ID)  
26. 5P-6620 [1] SEAL-O-RING (14MM ID)  
27. 8L-5832 C [1] NUT-HEX (10-32-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14510458
 

2W-6275: PUMP GP-GOV & FUEL INJ

2W-6275 PUMP GP-GOV & FUEL INJ
S/N 7JB2222-UP
i00359803 SEBP1451
2W6275 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
4. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
5. 8N-3799 [1] COVER-FUEL RATIO  
6. 4W-5735 [1] LEVER AS-PIVOT  
7. 115-1249 [1] SETSCREW-SOCKET  
8. 8L-5832 [1] NUT-HEX (10-32-THD)  
9. 4W-5734 [1] LEVER AS  
  6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
10. 2W-2410 Y [1] GOVERNOR GP  
13. 6I-2833 CY [1] PUMP GP-FUEL INJECTION  
14. 0S-1616 [2] BOLT (1/4-20X1-IN)  
15. 7C-8993 Y [1] FASTENER GP-FUEL INJ PUMP  
16. 7N-2176 [1] PIN-DETENT  
17. 7N-1052 [1] DOWEL  
18. 8N-3093 [1] SPRING-DETENT  
19. 8N-7276 Y [1] TORQUE CONTROL GP  
20. 8N-5784 [1] DEFLECTOR-PULSE  
21. 8N-9594 [1] SPRING  
22. 8N-5403 [1] SHAFT AS-THROTTLE  
23. 2W-5448 [1] COVER  
24. 7N-9907 [1] COVER  
27. 8L-5832 [1] NUT-HEX (10-32-THD)  
28. 3J-1907 [1] SEAL-O-RING  
29. 5P-6620 [1] SEAL-O-RING  
30. 8J-8343 [1] SEAL-O-RING  
31. 8M-8515 [1] SEAL-O-RING  
32. 033-5879 [1] SEAL-O-RING  
33. 144-0477 [1] GASKET  
34. 150-3726 [1] GASKET  
35. 150-3727 [1] GASKET-FUEL  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14510459
 

7W-5932: PUMP GP-GOV & FUEL INJ

7W-5932 PUMP GP-GOV & FUEL INJ
S/N 7JB2391-UP
PART OF 7W-7899 PUMP GP-GOV & FUEL INJ
i00413802 SEBP1451
7W5932 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306B INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [2] PLUG  
  4J-7533 [2] SEAL-O-RING  
2. 1W-3286 [1] RACK-REGULATOR  
3. 1W-3487 Y [1] HOUSING GP-FUEL PUMP  
4. 7W-5928 Y [6] PUMP GP-FUEL INJECTION  
5. 8N-5117 [6] BUSHING-TERMINAL  
6. 7E-4846 [6] SEAL-O-RING  
7. 4W-6869 [6] SPACER (27X32.54X5.049-MM THK)  
8. 7N-1046 [1] GASKET-COVER  
9. 7N-8421 [1] RING-RETAINING  
10. 8N-2487 [1] WASHER-THRUST  
11. 8N-2489 [6] LIFTER AS  
12. 0S-1615 [4] BOLT (1/4-20X0.75-IN)  
13. 7N-1047 [1] COVER-TIMING  
14. 7W-5930 [1] CAMSHAFT AS  
  7W-7331 [1] CAMSHAFT-FUEL PUMP  
15. 8N-2510 [1] SHAFT-WEIGHT CARRIER  
  4N-9019 [1] DOWEL  
16. 7N-7265 [1] SHIELD-WEIGHT CARRIER  
  7N-7264 [4] WEIGHT-GOVERNOR  
  9Y-7037 [4] BOLT (1/4-20X1.25-IN)  
  1S-5440 [4] DOWEL  
17. 8N-2511 [1] CARRIER-WEIGHT  
18. 7N-7166 [2] RACE-THRUST BEARING  
  7L-3326 [1] BEARING-THRUST  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement
1981/04/22
Explanation Of Differences In Timing Advance Information
1981/08/26
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
Service Information For Woodward Governors
1983/10/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
Fill Oil Sump Before Installing Woodward Governor
1985/01/16
Bolt Removed From Governor And Fuel Injection Pump Group
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Governor Control Motor Polarity May Require A Change
1990/11/01
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/01
Governor Spring Guide Press Depth {1287,1284}
1996/01/17
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Check Assembled Dimension for Rack Lever Travel{1264, 1250}
Check Assembled Dimension for Rack Lever Travel{1264, 1250}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Fuel Injection Pump
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Governor
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Ratio Control
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Woodward PSG Governor
3304B & 3306B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Governor Control
3304B & 3306B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Disassembly and Assembly
Fuel Injection Pump Housing & Governor
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Governor
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3304B & 3306B INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing And Governor
3304B & 3306B MARINE ENGINES
Governor
3304B & 3306B MARINE ENGINES
Fuel Injection Pumps
3304B & 3306B MARINE ENGINES
Fuel Transfer Pump
3304B & 3306B MARINE ENGINES
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
New Torque Specification For Fuel Injection Pump Bushing{1251,1253}
1982/08/09
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Check Assembled Dimension For Rack Lever Travel If Governor Housing Assembly Is Replaced {1264}
1988/12/19
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
Governor Control Motor Polarity May Require A Change{1265,1408,7556}
1990/10/29
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Governor Control Cover Assembly Includes New Seal And Improved Cover {1264}
1997/07/07
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22

Caterpillar Parts SIS Catalog 3306B :

PUMP GP-FUEL TRANSFER
1W-1695 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
1W-1695 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
1W-1695 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL PRM & PRIM FILTER
8N-6201 PUMP GP-FUEL PRM & PRIM FILTER
PUMP GP-FUEL PRM & PRIM FILTER
8N-5251 PUMP GP-FUEL PRM & PRIM FILTER
PUMP GP-FUEL PRM & PRIM FILTER
8N-1180 PUMP GP-FUEL PRM & PRIM FILTER
PUMP GP-FUEL PRM & PRIM FILTER
1W-5374 PUMP GP-FUEL PRM & PRIM FILTER
PUMP GP-FUEL PRM & PRIM FILTER
149-1328 PUMP GP-FUEL PRM & PRIM FILTER
PUMP GP-GOV & FUEL INJ
131-2650 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
131-2651 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
131-2652 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-0058 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-1078 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-1078 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-6275 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2W-6275 PUMP GP-GOV & FUEL INJ

Truck sale:

Caterpillar 3306B
 
Caterpillar 3306B
- Stationary Generator Sets
THOMPSON MACHINERY COMMERCE CORPORATION
 
41,500 
Caterpillar 3306B, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar 3306B, Stationary Generator Sets, Construction
33,500 
Caterpillar 3306B, Stationary Generator Sets, Construction
- Stationary Generator Sets
RING POWER CORP.
Caterpillar D3306BEP, Stationaire Generatorsets, Bouw
38.001 
Caterpillar D3306BEP, Stationaire Generatorsets, Bouw
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3306B, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
 
Caterpillar 3306B, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
RING POWER CORP.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.