AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4T1963 CYLINDER GP-LIFT-2 REQUIRED-(CHGS N01-N02) 101.6 MM (4.7 IN) BORE X 742 MM (29.2 IN) STROKE TYPE 2 943


HYDRAULIC SYSTEM
CYLINDER GP
PUMP GP
KICKOUT & POSITIONER GP

TRACK LOADER 943 TRACK LOADER 19Z
 943 LGP TRACK LOADER / HIGH DRIVE / 19Z00253-UP (MACHINE) POWERED BY 3204 ENGINE SEBP1456 943 19Z   (1982)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP
4T-9387 CYLINDER GP
CYLINDER GP
4T-1963 CYLINDER GP
CYLINDER GP
4T-1963 CYLINDER GP
CYLINDER GP-TILT
1U-4802 CYLINDER GP-TILT
CYLINDER GP-TILT
1U-4802 CYLINDER GP-TILT
CYLINDER GP
3G-1296 CYLINDER GP
 

#SEBP14560570
 

4T-1963: CYLINDER GP

4T1963 CYLINDER GP-LIFT-2 REQUIRED-(CHGS N01-N02)
101.6 MM (4.7 IN) BORE X 742 MM (29.2 IN) STROKE
TYPE 2
c493084 SEBP1456
4T1963 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your 943 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-1964 R [1] CYLINDER AS  
2. 3G-8595 [1] BEARING-SLEEVE  
3. 5J-8225 J [1] SEAL-U-CUP  
4. 7J-6461 [1] CROWN  
5. 4J-3515 J [1] SEAL-LIP TYPE  
6. 4T-1966 R [1] ROD AS  
7. 5J-3616 J [1] SEAL-RING  
8. 2K-6830 J [1] RING-BACK-UP  
9. 1H-8128 J [1] SEAL-O-RING  
10. 9T-5821 C [1] HEAD  
11. 9J-9789 [1] PISTON  
12. 5J-5402 J [1] SEAL AS  
13. 6J-2797 J [1] RING-WEAR  
14. 5P-8250 [1] WASHER  
15. 7J-5639 [1] BOLT-SELF LOCKING  
16. 8T-4958 C [1] RING-WEAR  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-1439 [1] KIT-HYD CYLINDER SEAL  
    (INCL PARTS MARKED J)
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP14560571
 

1U-4802: CYLINDER GP-TILT

1U4802 TILT CYLINDER GP(CHG V00)
121 MM (4.75 IN) BORE X 493 MM (19.4 IN) STROKE
S/N 19Z253-827
c301146 SEBP1456
1U4802 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your 943 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-4801 R [1] CYLINDER AS  
  9S-7725 [1] PLUG-SEALING  
  3D-2824 [1] SEAL-O-RING  
  0T-0690 [4] BOLT  
2. 3G-8605 [1] CAP AS  
  3G-8606 [1] BEARING  
3. 3G-4649 [1] PISTON  
4. 3J-9545 [1] NUT-SELF LOCKING  
5. 4J-3342 [1] RING-WEAR  
6. 5J-4987 [1] SEAL AS  
7. 1D-4627 [2] BOLT  
8. 5P-8249 [2] WASHER  
9. 5J-0964 [1] SEAL-U-CUP  
10. 1K-6982 [1] SEAL-LIP TYPE  
11. 3G-4643 R [1] ROD AS  
12. 1U-4049 [1] WASHER  
13. 5H-6734 [1] SEAL-O-RING  
  2J-3961 [1] RING-BACK-UP  
14. 5J-3620 [1] SEAL-RING  
15. 3G-4650 [1] HEAD  
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP14560572
 

1U-4802: CYLINDER GP-TILT

1U4802 CYLINDER GP-TILT-(CHGS V01-V04)
121 MM (4.75 IN) BORE X 493 (19.4 IN) STROKE
S/N 19Z828-UP
c497876 SEBP1456
1U4802 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your 943 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-4801 R [1] CYLINDER AS  
  9S-7725 [1] PLUG-SEALING  
  3D-2824 [1] SEAL-O-RING  
  0T-0690 [4] BOLT  
2. 3G-8605 [1] CAP AS  
3. 3G-4649 [1] PISTON  
4. 3J-9545 [1] NUT-SELF LOCKING  
5. 4J-3342 J [1] RING-WEAR  
6. 5J-4987 J [1] SEAL AS  
7. 1D-4627 [2] BOLT  
8. 5P-8249 C [4] WASHER  
9. 5J-0964 J [1] SEAL-U-CUP  
10. 8C-3840 CJ [1] SEAL-LIP TYPE  
11. 3G-4643 R [1] ROD AS  
12. 1U-4049 [1] WASHER  
13. 5H-6734 J [1] SEAL-O-RING  
  2J-3961 J [1] RING-BACK-UP  
14. 8C-3839 CJ [1] SEAL AS  
15. 9T-5504 C [1] HEAD  
16. 8T-8394 C [1] RING-WEAR  
17. 1A-5576 C [2] BOLT  
18. 8G-1189 C [2] SPACER  
   
   
   
   
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
    (INCLS. PARTS MARKED J)
  7X-2660 [1] KIT-HYD CYLINDER SEAL  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP14560573
 

3G-1296: CYLINDER GP

3G1296 CYLINDER GP-RIPPER-2 REQUIRED-(CHGS N03, N05)
101.6 MM (4.0 IN) BORE X 270 MM (10.6 IN) STROKE. TYPE 1
PART OF 4T0660 CYLINDER & MOUNTING-RIPPER
AN ATTACHMENT
c511808 SEBP1456
3G1296 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your 943 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-1292 [1] CYLINDER AS  
2. 7J-5639 [1] BOLT-SELF LOCKING  
  8J-7415 [1] WASHER-HARD  
3. 6J-2797 [1] RING-WEAR  
4. 5J-5402 [1] SEAL AS  
5. 6J-6917 [1] SEAL-RING  
6. 5J-8200 [1] SEAL-U-CUP  
7. 1K-6981 [1] SEAL-LIP TYPE  
8. 3G-1294 [1] ROD AS  
9. 7J-6461 [1] CROWN  
10. 9S-4190 [1] PLUG-0-RING  
  2M-9780 [1] SEAL-O-RING  
11. 1H-8128 [1] SEAL-O-RING  
12. 7J-6462 [1] HEAD  
13. 7J-6469 [1] PISTON  
14. 2K-6830 [1] RING-BACK-UP  
 

#SEBP14560574
 

3G-1296: CYLINDER GP

3G1296 CYLINDER GP-RIPPER-2 REQUIRED-(CHANGE X04)
101.6 MM (4.0 IN) BORE X 270 MM (10.6 IN) STROKE. TYPE 2
PART OF 4T0660 CYLINDER & MOUNTING-RIPPER
AN ATTACHMENT
c539083 SEBP1456
3G1296 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your 943 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-1292 [1] CYLINDER AS  
2. 7J-5639 [1] BOLT-LOCKING  
  8J-7415 [1] WASHER-HARD  
3. 6J-2797 [1] RING-WEAR  
4. 5J-5402 [1] SEAL AS  
  5J-5401 [1] RING-EXPANDER  
5. 6J-6917 [1] SEAL-RING  
6. 5J-8200 [1] SEAL-U-CUP  
7. 1K-6981 [1] SEAL-LIP  
8. 3G-1294 [1] ROD AS  
9. 7J-6461 [1] CROWN  
10. 9S-4190 [1] PLUG-O-RING  
  2M-9780 [1] SEAL-O-RING  
11. 1H-8128 [1] SEAL-O-RING  
12. 9T-3964 C [1] HEAD  
13. 7J-6469 [1] PISTON  
14. 2K-6830 [1] RING-BACKUP  
15. 4T-5613 C [1] RING-WEAR  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14560575
 

8G-7151: PUMP GP-VANE

8G7151 VANE PUMP GP-SINGLE
3G1752-PAGE 226
c307939 SEBP1456
8G7151 PUMP GP-VANE Parts scheme
  For full view, you need register

Parts for your 943 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-9758 [1] GEAR (38 TEETH)  
2. 1D-5121 [1] NUT  
3. 4J-2861 [1] LOCK  
4. 2W-2506 [1] SPACER  
5. 3G-1752 Y [1] PUMP GROUP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP14560576
 

3G-1752: PUMP GP-VANE

3G1752 VANE PUMP GP
1U3519-PAGE 227
PART OF 8G7151 VANE PUMP
c303748 SEBP1456
3G1752 PUMP GP-VANE Parts scheme
  For full view, you need register

Parts for your 943 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-3504 [1] COVER  
2. 1U-3519 RY [1] CARTRIDGE GROUP  
    (Separate Illustration)
3. 4M-7652 [1] RING  
4. 1U-3518 [1] BODY  
5. 5P-0903 [1] SEAL  
6. 1U-3842 [1] SHAFT  
7. 4M-7648 [1] WASHER  
8. 3G-7242 [1] PLUG  
9. 4J-0985 [1] BEARING  
10. 1L-8497 [1] RING  
11. 1D-4569 [4] BOLT  
12. 3G-9193 [1] SEAL  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14560577
 

1U-3519: CARTRIDGE GP-VANE PUMP

1U3519 CARTRIDGE GP*R
PART OF 3G1752 PUMP-VANE
c402151 SEBP1456
1U3519 CARTRIDGE GP-VANE PUMP Parts scheme
  For full view, you need register

Parts for your 943 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-3078 [4] SEAL-O-RING  
2. 3G-2192 [4] RETAINER-SEAL  
3. 9T-5041 [2] DOWEL  
4. 9T-5047 [1] PLATE-INLET  
5. 064-7311 [1] KIT-VANE  
6. 9T-5065 [1] RING  
7. 6V-1197 [1] SEAL-O-RING  
8. 8J-4351 [1] SEAL-O-RING  
9. 9T-5086 [1] RING  
10. 9T-5090 [1] PLATE-OUTLET  
11. 3G-2193 [1] RING-SEAL  
12. 9T-5098 [2] FLEXPLATE  
13. 064-7310 [1] ROTOR-PUMP  
14. 9T-5110 [2] SCREW  
 

#SEBP14560578
 

7P-6608: KICKOUT & POSITIONER GP

7P6608 KICKOUT & POSITIONER GP-PART 1 OF 2
c453257 SEBP1456
7P6608 KICKOUT & POSITIONER GP Parts scheme
  For full view, you need register

Parts for your 943 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7P-8695 [1] PLATE AS  
2. 0S-0509 [2] BOLT  
3. 5M-2894 C [3] WASHER  
4. 7P-8697 [1] LEVER AS  
  4B-4283 [1] WASHER  
5. 5P-5015 [4] BEARING-ROLLER  
6. 0S-1591 [2] BOLT  
7. 1D-4717 C [4] NUT  
8. 7P-4493 [1] LEVER  
9. 1B-8706 C [1] KEY-WOODRUFF  
10. 1B-0676 [3] PIN  
11. 4M-2348 C [3] COTTER  
12. 1F-5403 [1] END-ADJUSTABLE ROD  
13. 1B-4203 [5] NUT-FULL  
14. 7P-8701 [1] ROD  
15. 4D-4064 [1] ROD END  
16. 0T-0102 C [1] BOLT  
17. 4V-8198 [1] SPACER  
18. 8G-4257 [1] LEVER  
19. 8G-3525 [1] LEVER  
20. 8G-1029 [1] ROLLER  
  3D-8823 [1] BEARING-SLEEVE  
  8M-5346 [1] SUPPORT-BAFFLE  
21. 1K-6872 [1] LOCKNUT  
  0S-1587 [1] BOLT  
22. 7P-3439 [1] LEVER  
23. 7P-8633 C [1] SHAFT  
24. 6D-5974 [2] BEARING-ROLLER  
25. 8G-0576 [1] TUBE AS  
26. 010-2901 [1] SETSCREW-SQUARE HEAD  
27. 1L-3047 [2] WASHER  
28. 0S-1590 [1] BOLT  
29. 3W-3320 C [1] CLIP  
30. 0L-0478 [1] BOLT  
  6B-0933 [1] SPACER  
31. 1A-9252 [2] END-ADJUSTABLE ROD  
32. 7P-8847 [1] ROD  
33. 7P-3420 [1] SHAFT  
34. 2H-3855 C [2] BOLT  
  5P-8245 [2] WASHER  
35. 0L-1143 [1] BOLT  
  0L-1319 [1] WASHER  
36. 5P-1075 [1] WASHER-HARD  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14560579
 

7P-6608: KICKOUT & POSITIONER GP

7P6608 KICKOUT POSITIONER GP-PART 2 OF 2
c453258 SEBP1456
7P6608 KICKOUT & POSITIONER GP Parts scheme
  For full view, you need register

Parts for your 943 TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7P-3415 [1] SHAFT  
2. 1F-4449 [1] SPRING  
3. 7P-8677 [1] COVER  
4. 0L-1351 [5] BOLT  
5. 5P-1075 [8] WASHER-HARD  
6. 7B-0462 [1] WASHER 6.35MM(.25IN.)THK  
7. 7P-8679 [1] BAR AS  
8. 2B-0860 [1] NUT-THREAD-LH  
9. 7P-8683 [1] ROD AS  
  5P-0541 [1] NUT-JAM  
10. 1D-5119 [1] NUT  
11. 7P-8685 [1] LEVER AS  
  1K-4675 [1] BUSHING-OILLESS  
12. 7F-5227 [1] BOLT  
13. 6K-8714 [4] WASHER  
14. 7P-8687 [1] SHAFT  
15. 6F-3890 [1] SPACER-CLUTCH LEVER  
16. 6D-3787 [1] BEARING  
17. 7P-1810 [1] BEARING AS  
18. 7P-8676 [1] SUPPORT AS  
19. 7P-8672 [1] PLATE  
20. 0S-1619 [1] BOLT  
  2K-4973 [1] LOCKNUT  
  8M-7145 [1] WASHER  
21. 0S-1594 [2] BOLT  
22. 7P-8688 [1] PLATE  
23. 7P-8669 [1] BRACKET AS  
24. 9F-2978 [5] NUT-WELD  
25. 7P-8678 [1] PLATE  
26. 3J-5397 [1] ROLLER-CAMSHAFT  
27. 4D-6432 [1] LOCKNUT  
  3V-3307 [1] WASHER-HARD  
28. 7P-3414 [1] LEVER  
29. 0S-1571 [1] BOLT  
  0L-1319 [1] WASHER  
 

Information:

Special Instruction
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Magazine
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 943 :

CYLINDER GP
4T-1963 CYLINDER GP
CYLINDER GP
4T-9387 CYLINDER GP
CYLINDER GP
4T-9387 CYLINDER GP
CYLINDER & SEAL GP
9V-8168 CYLINDER & SEAL GP
CYLINDER GP-BUCKET
9J-4892 CYLINDER GP-BUCKET
LINES GP-BUCKET
5G-8049 LINES GP-BUCKET
LINES GP-BUCKET
5G-8049 LINES GP-BUCKET
LINES GP-BUCKET
9V-8414 LINES GP-BUCKET
CYLINDER GP-TILT
1U-4802 CYLINDER GP-TILT
CYLINDER GP-TILT
1U-4802 CYLINDER GP-TILT
CYLINDER GP
3G-1296 CYLINDER GP
CYLINDER GP
3G-1296 CYLINDER GP
PUMP GP-VANE
8G-7151 PUMP GP-VANE
PUMP GP-VANE
3G-1752 PUMP GP-VANE
CARTRIDGE GP-VANE PUMP
1U-3519 CARTRIDGE GP-VANE PUMP
KICKOUT & POSITIONER GP
7P-6608 KICKOUT & POSITIONER GP

Truck sale:

Caterpillar 943, kettenlader, Bau-Und Bergbauausrüstung
 
Caterpillar 943, kettenlader, Bau-Und Bergbauausrüstung
- track loaders
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 943, Construction
17,730 
Caterpillar 943, Construction
- track loaders
ZEPPELIN BAUMASCHINEN
Germany
 
17.823 
Caterpillar 943, kettenlader, Bau-Und Bergbauausrüstung
- track loaders

 
18,302 
Caterpillar 943, Construction
- track loaders

Caterpillar TH943D, Construction
1,991 
Caterpillar TH943D, Construction
- forks
FINNING CANADA – USED ATTACHMENTS
Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.