ELECTRICAL AND STARTING SYSTEM
LIGHTING GPIGNITION GP
ELECTRICAL AND STARTING SYSTEM
LIGHTING GP
#SEBP14600720
3N-5718: HOLDER
3N-5718 HOLDER
S/N 5LA3999-UP; 6CA1-UP; 6DA1-UP
SWITCH-RED
AN ATTACHMENT AND FIELD INSTALLATION
S/N 5LA3999-UP; 6CA1-UP; 6DA1-UP
SWITCH-RED
AN ATTACHMENT AND FIELD INSTALLATION
For full view, you need register
Parts for your G3408 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP14600721
163-6163: IGNITION GP-GAS ENGINE
For full view, you need register
Parts for your G3408 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2N-2839 | [8] | PLUG AS-SPARK | |
| (EACH INCLUDES) | ||||
| 108-3515 | [1] | GASKET-PLUG | ||
| 2. | 107-2874 | [2] | BRACKET | |
| 3. | 5P-4116 | [21] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 4. | 1C-0569 | [16] | BOLT (5/16-18X0.5-IN) | |
| 5. | 9G-9151 | [1] | CLIP | |
| 6. | 2S-6024 | [2] | FUSE (5-AMPERE) | |
| 7. | 8L-5449 | [8] | SPACER (0.375X0.75X0.69-IN THK) | |
| 8. | 7W-8542 | [8] | WIRE AS-PLUG | |
| 9. | 2W-3747 | [8] | TRANSFORMER AS | |
| 10. | 7E-0079 | [8] | SEAL | |
| 11. | 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | |
| 12. | 0T-0065 | [1] | BOLT (3/8-16X3.5-IN) | |
| 13. | 5M-2894 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 14. | 4P-7581 | [8] | CLIP (LADDER) | |
| 15. | 9X-6772 | [9] | STRAP-CABLE | |
| 16. | 1A-9579 | [9] | BOLT (5/16-18X1.5-IN) | |
| 17. | 4P-8134 | [1] | CLIP (LADDER) | |
| 18. | 163-6164 Y | [1] | CONTROL GP-TIMING | |
| 19. | 163-6110 | [1] | HARNESS AS-SENSOR | |
| 20. | 116-6806 | [1] | SENSOR GP-SPEED (TIMING) | |
| 21. | 163-6165 | [1] | HARNESS AS-WIRING (IGNITION) | |
| 6D-8149 | [1] | PLUG AS-CONNECTOR (10-PIN) | ||
| 9G-3695 | [1] | PLUG-SEAL | ||
| 24. | 9G-2731 | [2] | HOLDER AS-FUSE | |
| 25. | 8T-6342 E | TUBE-HEAT SHRINK (3.2-MM DIA)(8CM) | ||
| 26. | 4B-8407 | [1] | GASKET-COPPER | |
| E | ORDER BY THE CENTIMETER | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP14600722
163-6169: IGNITION GP-GAS ENGINE
For full view, you need register
Parts for your G3408 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 163-6164 Y | [1] | CONTROL GP-TIMING | |
| 2. | 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | |
| 3. | 163-8070 Y | [1] | HARNESS AS-WIRING (TIMING) | |
| 4. | 7E-3060 | [1] | ADAPTER | |
| 5. | 7W-5193 | [1] | CONNECTOR | |
| 6. | 9Y-7361 | [8] | BOOT | |
| 7. | 9Y-4167 | [8] | TRANSFORMER AS (IGNITION) | |
| 8. | 4W-2256 | [8] | SPARK PLUG | |
| (EACH INCLUDES) | ||||
| 108-3515 | [1] | GASKET-PLUG | ||
| 176-7748 | [1] | GASKET | ||
| 9. | 4P-8134 | [8] | CLIP (LADDER) | |
| 10. | 9X-6772 | [8] | STRAP-CABLE | |
| 11. | 9M-1974 | [8] | WASHER-HARD (8.8X16X2-MM THK) | |
| 12. | 291-5863 | [1] | HARNESS AS-WIRING (IGNITION, RH) | |
| 13. | 3T-3622 | [8] | CLAMP | |
| 14. | 0S-1614 | [4] | BOLT (1/4-20X0.5-IN) | |
| 15. | 5P-0537 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 17. | 163-6151 | [1] | BRACKET AS | |
| 21. | 1C-0569 | [8] | BOLT (5/16-18X0.5-IN) | |
| 22. | 5P-6025 D | LOCKWIRE (0.8-M) | ||
| 23. | 8S-8158 | [8] | SEAL-WIRE | |
| 24. | 116-6806 | [1] | SENSOR GP-SPEED (TIMING) | |
| 25. | 4B-8407 | [1] | GASKET-COPPER | |
| 26. | 3E-6488 | [1] | PLUG AS-CONNECTOR | |
| 29. | 8S-8158 | [3] | SEAL-WIRE | |
| 30. | 5P-6025 D | LOCKWIRE (0.3-M) | ||
| 31. | 290-7080 | [1] | HARNESS AS-WIRING (IGNITION, LH) | |
| 6D-8149 | [2] | PLUG AS-CONNECTOR (10-PIN) | ||
| 32. | 291-5864 | [1] | HARNESS AS-WIRING (IGNITION, LH) | |
| 9G-2731 F | [2] | HOLDER AS-FUSE | ||
| 2S-6024 F | [2] | FUSE (5-AMPERE) | ||
| 8T-6342 EF | TUBE-HEAT SHRINK (3.2-MM DIA)(8-CM) | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP14600723
205-5644: IGNITION GP-GAS ENGINE
205-5644 IGNITION GP-GAS ENGINE
S/N 6NB1-UP
FOR USE WITH STANDBY GENERATOR SETS
AN ATTACHMENT
S/N 6NB1-UP
FOR USE WITH STANDBY GENERATOR SETS
AN ATTACHMENT
For full view, you need register
Parts for your G3408 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2N-2839 | [8] | PLUG AS-SPARK | |
| (EACH INCLUDES) | ||||
| 108-3515 | [1] | GASKET-PLUG | ||
| 2. | 107-2874 | [2] | BRACKET | |
| 3. | 5P-4116 | [21] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 4. | 1C-0569 | [16] | BOLT (5/16-18X0.5-IN) | |
| 5. | 9G-9151 | [1] | CLIP | |
| 6. | 2S-6024 | [2] | FUSE (5-AMPERE) | |
| 7. | 8L-5449 | [8] | SPACER (0.375X0.75X0.69-IN THK) | |
| 8. | 7W-8542 | [8] | WIRE AS-PLUG | |
| 9. | 2W-3747 | [8] | TRANSFORMER AS | |
| 10. | 7E-0079 | [8] | SEAL | |
| 11. | 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | |
| 12. | 0T-0065 | [1] | BOLT (3/8-16X3.5-IN) | |
| 13. | 5M-2894 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 14. | 4P-7581 | [8] | CLIP (LADDER) | |
| 15. | 9X-6772 | [9] | STRAP-CABLE | |
| 16. | 1A-9579 | [9] | BOLT (5/16-18X1.5-IN) | |
| 17. | 4P-8134 | [1] | CLIP (LADDER) | |
| 18. | 163-6164 Y | [1] | CONTROL GP-TIMING | |
| 19. | 163-6110 | [1] | HARNESS AS-SENSOR (TIMING) | |
| 20. | 116-6806 | [1] | SENSOR GP-SPEED (TIMING) | |
| 21. | 163-6165 | [1] | HARNESS AS-WIRING (IGNITION) | |
| 6D-8149 | [1] | PLUG AS-CONNECTOR (10-PIN) | ||
| 24. | 9G-2731 | [2] | HOLDER AS-FUSE | |
| 25. | 8T-6342 BE | TUBE-HEAT SHRINK (3.2-MM DIA)(8-CM) | ||
| 26. | 4B-8407 | [1] | GASKET-COPPER | |
| 27. | 214-6132 | [8] | TUBE | |
| 28. | 5P-8068 | [8] | SEAL-O-RING | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP14600724
216-4018: IGNITION GP-GAS ENGINE
For full view, you need register
Parts for your G3408 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2N-2839 | [8] | PLUG AS-SPARK | |
| (EACH INCLUDES) | ||||
| 108-3515 | [1] | GASKET-PLUG | ||
| 2. | 107-2874 | [2] | BRACKET | |
| 3. | 5P-4116 | [25] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 4. | 1C-0569 | [16] | BOLT (5/16-18X0.5-IN) | |
| 5. | 9G-9151 | [1] | CLIP | |
| 6. | 2S-6024 | [2] | FUSE (5-AMPERE) | |
| 7. | 8L-5449 | [8] | SPACER (0.375X0.75X0.69-IN THK) | |
| 8. | 250-2149 | [8] | WIRE AS | |
| 9. | 2W-3747 | [8] | TRANSFORMER AS | |
| 10. | 7E-0079 | [8] | SEAL | |
| 12. | 0T-0065 | [1] | BOLT (3/8-16X3.5-IN) | |
| 13. | 5M-2894 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 14. | 4P-7581 | [8] | CLIP (LADDER) | |
| 15. | 7K-1181 | [9] | STRAP-CABLE | |
| 16. | 1A-9579 | [9] | BOLT (5/16-18X1.5-IN) | |
| 17. | 4P-8134 | [1] | CLIP (LADDER) | |
| 18. | 163-6164 Y | [1] | CONTROL GP-TIMING | |
| 19. | 163-6110 | [1] | HARNESS AS-SENSOR | |
| 20. | 116-6806 | [1] | SENSOR GP-SPEED (TIMING) | |
| 21. | 163-6165 | [1] | HARNESS AS-WIRING (IGNITION) | |
| 7N-9738 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | ||
| 6D-8149 | [1] | PLUG AS-CONNECTOR (10-PIN) | ||
| 9G-3695 | [1] | PLUG-SEAL | ||
| 7N-7779 | [1] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 5P-1476 | [16] | TERMINAL-FORK (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 2L-8052 | [2] | TERMINAL-RING (6-GA, 3/8-IN SCREW) | ||
| -OR- | ||||
| 2L-8060 | [2] | TERMINAL-RING (8-GA, 3/8-IN SCREW) | ||
| 2L-8076 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 24. | 9G-2731 | [2] | HOLDER AS-FUSE | |
| 25. | 8T-6342 E | TUBE-HEAT SHRINK (3.2-MM DIA)(8-CM) | ||
| 26. | 4B-8407 | [1] | GASKET-COPPER | |
| 27. | 214-6132 | [8] | TUBE | |
| 28. | 5P-8068 | [8] | SEAL-O-RING | |
| E | ORDER BY THE CENTIMETER | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP14600725
223-2158: IGNITION GP-GAS ENGINE
223-2158 IGNITION GP-GAS ENGINE
S/N 6NB1-UP
FOR USE WITH ENGINES CONFIGURED FOR CSA CERTIFIED DISN IGNITION SYSTEMS
AN ATTACHMENT
S/N 6NB1-UP
FOR USE WITH ENGINES CONFIGURED FOR CSA CERTIFIED DISN IGNITION SYSTEMS
AN ATTACHMENT
For full view, you need register
Parts for your G3408 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 163-6164 Y | [1] | CONTROL GP-TIMING | |
| 2. | 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | |
| 3. | 163-8070 | [1] | HARNESS AS-WIRING (TIMING) | |
| 9X-3406 | [1] | RECEPTACLE AS | ||
| 9X-4385 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 4. | 7E-3060 | [1] | ADAPTER | |
| 5. | 7W-5193 | [1] | CONNECTOR | |
| 6. | 9Y-7361 | [8] | BOOT | |
| 7. | 215-2434 | [8] | TRANSFORMER AS | |
| 8. | 4W-2256 | [8] | SPARK PLUG | |
| (EACH INCLUDES) | ||||
| 108-3515 | [1] | GASKET-PLUG | ||
| 176-7748 | [1] | GASKET | ||
| 9. | 4P-8134 | [8] | CLIP (LADDER) | |
| 10. | 9X-6772 | [8] | STRAP-CABLE | |
| 11. | 9M-1974 | [8] | WASHER-HARD (8.8X16X2-MM THK) | |
| 12. | 163-6171 | [1] | HARNESS AS | |
| 6D-8149 | [1] | PLUG AS-CONNECTOR (10-PIN) | ||
| 6I-0755 | [8] | PLUG AS-CONNECTOR (3-PIN) | ||
| 7X-6283 | [1] | RECEPTACLE AS | ||
| 13. | 3T-3622 | [8] | CLAMP | |
| 14. | 0S-1614 | [4] | BOLT (1/4-20X0.5-IN) | |
| 15. | 5P-0537 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 17. | 163-6151 | [1] | BRACKET AS | |
| 21. | 1C-0569 | [8] | BOLT (5/16-18X0.5-IN) | |
| 22. | 5P-1275 | LOCKWIRE (8DM) | ||
| 5P-6025 D | LOCKWIRE (.8M) | |||
| 23. | 8S-8158 | [8] | SEAL-WIRE | |
| 24. | 116-6806 | [1] | SENSOR GP-SPEED (TIMING) | |
| 25. | 4B-8407 | [1] | GASKET-COPPER | |
| 26. | 3E-6488 | [1] | PLUG AS-CONNECTOR | |
| 27. | 5P-1275 | LOCKWIRE (1DM) | ||
| 5P-6025 D | LOCKWIRE (.1M) | |||
| 28. | 8S-8158 | [1] | SEAL-WIRE | |
| 29. | 8S-8158 | [3] | SEAL-WIRE | |
| 30. | 5P-1275 | LOCKWIRE (3DM) | ||
| 5P-6025 D | LOCKWIRE (.3M) | |||
| 31. | 214-6132 | [8] | TUBE | |
| 32. | 5P-8068 | [8] | SEAL-O-RING | |
| 9G-2731 F | [2] | HOLDER AS-FUSE | ||
| 2S-6024 F | [2] | FUSE (5-AMPERE) | ||
| 8T-6342 F | [8] | TUBE-HEAT SHRINK (3.2-MM DIA) | ||
| D | ORDER BY THE METER | |||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP14600726
272-2376: IGNITION GP-GAS ENGINE
For full view, you need register
Parts for your G3408 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3T-3622 | [8] | CLAMP | |
| 2. | 4B-8407 | [1] | GASKET-COPPER | |
| 3. | 4D-1326 | [2] | LOCKWASHER | |
| 4. | 4W-2256 | [8] | SPARK PLUG | |
| (EACH INCLUDES) | ||||
| 108-3515 | [1] | GASKET-PLUG | ||
| 176-7748 | [1] | GASKET | ||
| 5. | 6B-0933 | [8] | SPACER (10.31X19.05X6.35-MM THK) | |
| 7. | 8T-6342 E | TUBE-HEAT SHRINK (3.2-MM DIA)(8-CM) | ||
| 8. | 9X-6772 | [2] | STRAP-CABLE | |
| 9. | 9Y-7361 | [8] | BOOT | |
| 10. | 116-6806 | [1] | SENSOR GP-SPEED (TIMING) | |
| 11. | 214-6132 | [8] | TUBE | |
| 12. | 215-2434 | [8] | TRANSFORMER AS | |
| 13. | 290-7080 | [1] | HARNESS AS-WIRING | |
| 6D-8149 | [2] | PLUG AS-CONNECTOR (10-PIN) | ||
| 14. | 291-5863 | [1] | HARNESS AS-WIRING (IGNITION, RH) | |
| 15. | 291-5864 | [1] | HARNESS AS-WIRING (IGNITION, LH) | |
| 16. | 0S-1594 | [1] | BOLT (3/8-16X1-IN) | |
| 17. | 0T-0065 | [2] | BOLT (3/8-16X3.5-IN) | |
| 18. | 2B-2695 | [8] | BOLT (5/16-18X0.875-IN) | |
| 19. | 4P-8134 | [2] | CLIP (LADDER) | |
| 20. | 5M-2894 | [3] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 21. | 5P-4116 | [8] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 22. | 5P-8068 | [8] | SEAL-O-RING | |
| 23. | 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | |
| 24. | 163-6164 Y | [1] | CONTROL GP-TIMING | |
| 25. | 163-8070 | [1] | HARNESS AS-WIRING (TIMING) | |
| 8S-4626 | [1] | SPLICE-WIRE | ||
| 3E-7430 | [1] | PLUG-PIPE | ||
| 4G-2544 | [1] | CONNECTOR-PLUG | ||
| 5P-6009 D | TUBE-HEAT SHRINK (9.52-MM DIA)(0.1-M) | |||
| 7E-3062 | [1] | COVER-UNILET | ||
| 7E-3063 | [1] | GASKET-INLET | ||
| 8T-6342 E | TUBE-HEAT SHRINK (3.2-MM DIA)(4-CM) | |||
| 9X-3406 | [1] | RECEPTACLE AS | ||
| 9X-4385 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 9X-8917 | [4] | SCREW-MACHINE (4-40X9.52-MM) | ||
| 9Y-6993 | [1] | ADAPTER | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(7-CM) | |||
| 140-2046 | [1] | GASKET | ||
| 163-8071 | [1] | CONDUIT AS | ||
| 163-8072 | [1] | CONDUIT AS | ||
| 26. | 3E-6488 | [1] | PLUG AS-CONNECTOR | |
| 27. | 2S-6024 | [2] | FUSE (5-AMPERE) | |
| 28. | 9G-2731 | [2] | HOLDER AS-FUSE | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP14600727
2W-5460: IGNITION GP-GAS ENGINE
For full view, you need register
Parts for your G3408 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4W-6009 | [8] | TRANSFORMER AS | |
| 2. | 4W-6019 | [8] | BOOT | |
| 3. | 4W-2256 | [8] | SPARK PLUG | |
| 4. | 7W-3807 | [8] | SPACER | |
| 5. | 1B-7182 CB | [6] | BOLT (5/16-18X1.25-IN) | |
| 9M-1974 CB | [6] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 6. | 4W-9038 | [1] | BRACKET | |
| 7. | 061-8005 CB | [6] | SPACER (9.25X13.72X16-MM) | |
| 8. | 5M-6213 C | [1] | PLUG-PIPE (1/4-18-THD) | |
| 9. | 3S-8664 C | [6] | CLIP (LOOP) | |
| 10. | 4W-2257 Y | [1] | MAGNETO GP | |
| 11. | 5P-6627 D | LOCKWIRE | ||
| 12. | 4W-3976 Y | [1] | HARNESS AS-POWER (IGNITION) | |
| 13. | 5P-4889 | [1] | SEAL-O-RING | |
| 14. | 1A-2029 C | [2] | BOLT (3/8-16X1.125-IN) | |
| 15. | 5M-2894 C | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 16. | 0L-1351 | [1] | BOLT (3/8-16X0.875-IN) | |
| 17. | 0T-0065 C | [4] | BOLT (3/8-16X3.5-IN) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP14600728
4P-1427: IGNITION GP-GAS ENGINE
For full view, you need register
Parts for your G3408 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7W-8413 | [2] | BRACKET | |
| 2. | 1H-5514 | [6] | BOLT (5/16-18X1.625-IN) | |
| 3. | 9M-1974 | [22] | WASHER-HARD (8.8X16X2-MM THK) | |
| 4. | 1C-0569 | [16] | BOLT (5/16-18X0.5-IN) | |
| 5. | 1B-2790 T | [2] | BOLT (5/16-18X1.375-IN) | |
| 9M-1974 JT | [2] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 8L-5449 JT | [2] | SPACER (0.375X0.75X0.69-IN THK) | ||
| 6. | 1B-2790 W | [2] | BOLT (5/16-18X1.375-IN) | |
| 7. | 9M-1974 W | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 8. | 8L-5449 W | [2] | SPACER (0.375X0.75X0.69-IN THK) | |
| 9. | 4P-1422 Y | [1] | MAGNETO GP | |
| 10. | 1B-2790 S | [4] | BOLT (5/16-18X1.375-IN) | |
| 11. | 9M-1974 S | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 12. | 8L-5449 S | [4] | SPACER (0.375X0.75X0.69-IN THK) | |
| 13. | 4W-5439 | [8] | TRANSFORMER AS | |
| 14. | 7W-8542 | [8] | WIRE AS-PLUG | |
| 15. | 7E-0079 | [8] | SEAL | |
| 16. | 0T-0065 | [2] | BOLT (3/8-16X3.5-IN) | |
| 17. | 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 18. | 2N-2839 | [8] | PLUG AS-SPARK | |
| 19. | 6L-5270 | [1] | GASKET-MAGNETO | |
| 20. | 1A-2029 | [2] | BOLT (3/8-16X1.125-IN) | |
| 21. | 7W-9824 Y | [1] | HARNESS AS-ENGINE (IGNITION) | |
| 5P-6627 D | LOCKWIRE (0.1-M) | |||
| 22. | 5M-6213 | [1] | PLUG-PIPE (1/4-18-THD) | |
| D | ORDER BY THE METER | |||
| J | NOT REQUIRED ON 'TA' ENGINES | |||
| S | FOR USE WITH CYLINDERS #1, #3, #5, & #7 ONLY | |||
| T | FOR USE WITH CYLINDERS #2 & #8 ONLY | |||
| W | FOR USE WITH CYLINDERS #4 & #6 ONLY | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP14600729
4P-1427: IGNITION GP-GAS ENGINE
For full view, you need register
Parts for your G3408 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2N-2839 | [8] | PLUG AS-SPARK | |
| 2. | 107-2874 | [2] | BRACKET | |
| 3. | 9X-6458 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 4. | 5P-4116 | [21] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 5. | 1C-0569 | [16] | BOLT (5/16-18X0.5-IN) | |
| 6. | 1A-9579 | [9] | BOLT (5/16-18X1.5-IN) | |
| 7. | 7W-9824 Y | [1] | HARNESS AS-ENGINE (IGNITION) | |
| 8. | 6V-1196 C | [1] | SEAL-O-RING | |
| 9. | 8L-5449 | [8] | SPACER (0.375X0.75X0.69-IN THK) | |
| 10. | 4P-8904 YC | [1] | MAGNETO GP | |
| 11. | 2W-3747 C | [8] | TRANSFORMER AS | |
| 12. | 7W-8542 | [8] | WIRE AS-PLUG | |
| 13. | 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | |
| 14. | 0T-0065 | [1] | BOLT (3/8-16X3.5-IN) | |
| 15. | 5M-2894 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 16. | 1A-2029 | [2] | BOLT (3/8-16X1.125-IN) | |
| 17. | 3P-1388 D | LOCKWIRE | ||
| 18. | 4P-7581 | [8] | CLIP (LADDER) | |
| 19. | 9X-6772 | [9] | STRAP-CABLE | |
| 20. | 7E-0079 | [8] | SEAL | |
| 21. | 4P-8134 | [1] | CLIP (LADDER) | |
| 22. | 9G-9151 | [1] | CLIP | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| Y | SEPARATE ILLUSTRATION | |||
