ENGINE ARRANGEMENT
ENGINE ARENGINE ARRANGEMENT
ENGINE AR#SEBP14650130
4W-0604: ENGINE AR
4W0604 ENGINE AR-FORD MOTOR CO-PART 2 OF 2
CARB CERTIFIED-S/N 2Z3600-UP
CARB CERTIFIED-S/N 2Z3600-UP
Parts for your 3208 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| LUBRICATION SYSTEM | ||||
| 1W-2638 Y | [1] | OIL FILTER GROUP | ||
| 9N-6336 Y | [1] | OIL LINES GROUP | ||
| 1W-2206 Y | [1] | OIL PUMP GROUP | ||
| 2W-2417 Y | [1] | OIL LEVEL GAUGE GROUP | ||
| COOLING SYSTEM | ||||
| 9N-0521 Y | [1] | OIL COOLER GROUP | ||
| 9N-6572 Y | [1] | WATER LINES GROUP | ||
| 9N-3654 Y | [1] | WATER PUMP GROUP | ||
| INTAKE & EXHAUST SYSTEM | ||||
| 1W-1599 Y | [1] | AIR LINES GROUP | ||
| 1W-1448 Y | [1] | EXHAUST MANIFOLD GROUP | ||
| 9N-6622 Y | [1] | INLET MANIFOLD GROUP | ||
| 1W-6718 Y | [1] | TURBOCHARGER GROUP | ||
| 9N-6606 Y | [1] | PCV VALVE GROUP | ||
| FUEL SYSTEM & GOVERNOR | ||||
| 1W-9819 Y | [1] | GOVERNOR CONTROL GROUP | ||
| 1W-7320 Y | [1] | GOVERNOR & FUEL PUMP DRIVE GROUP | ||
| 9L-6925 Y | [1] | FUEL SYSTEM FASTENER GROUP | ||
| 2W-0054 Y | [1] | FUEL FILTER GROUP | ||
| 2W-2372 Y | [1] | FUEL FILTER LINES GROUP | ||
| 9N-3880 Y | [1] | FUEL INJECTION LINES GROUP | ||
| 1W-6742 Y | [1] | GOVERNOR & FUEL INJECTION PUMP GROUP | ||
| 5N-8297 | [2] | FILM--3208 ON L.H.& R.H.VALVE COVERS | ||
| GASKET KITS | ||||
| 6V-5471 | CENTRAL & LOWER STRUCTURE | |||
| 6V-3789 | FRONT STRUCTURE | |||
| 6V-2909 | FUEL SYSTEM | |||
| 6V-8043 | MULTIPLE CYLINDER HEAD | |||
| 6V-6402 | REAR STRUCTURE | |||
| 6V-8044 | SINGLE CYLINDER HEAD | |||
| 6V-8045 | TURBOCHARGER MOUNTING | |||
| 6V-6894 | WATER PUMP | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP14650131
4W-1494: ENGINE AR
4W1494 ENGINE AR-PART 1 OF 2
S/N 2Z4120-13750
S/N 2Z4120-13750
Parts for your 3208 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| CENTRAL STRUCTURE | ||||
| 9N-6356 RY | [1] | CYLINDER BLOCK GROUP | ||
| 9N-6609 Y | [1] | CAMSHAFT GROUP | ||
| 9N-6222 Y | [1] | CRANKSHAFT GROUP | ||
| 9N-6435 Y | [8] | CONNECTING ROD & PISTON GROUP | ||
| 9N-0542 Y | [1] | CRANKSHAFT SEAL GROUP | ||
| UPPER STRUCTURE | ||||
| 8N-0913 Y | [1] | VALVE MECHANISM COVER GROUP | ||
| 9N-3600 RY | [1] | CYLINDER HEAD GROUP | ||
| 1W-1692 Y | [1] | LIFTING GROUP | ||
| SERIAL NO. 2Z4120 TO 2Z10696 INCLUSIVE | ||||
| 4N-6808 Y | [1] | LIFTING GROUP | ||
| SERIAL NO. 2Z10697-UP | ||||
| 9N-6617 Y | [1] | VALVE MECHANISM GROUP | ||
| FRONT STRUCTURE | ||||
| 9N-0560 Y | [1] | FRONT HOUSING COVER GROUP | ||
| SERIAL NO. 2Z4120 TO 2Z10696 INCLUSIVE | ||||
| 4W-1493 Y | [1] | PULLEY & DAMPER GROUP | ||
| 9N-5211 Y | [1] | FRONT HOUSING GROUP | ||
| 9N-5224 Y | [1] | ENGINE SUPPORT GROUP | ||
| REAR STRUCTURE | ||||
| 9L-7861 Y | [1] | FLYWHEEL HOUSING COVER GROUP | ||
| 9N-0529 Y | [1] | FLYWHEEL HOUSING GROUP | ||
| LOWER STRUCTURE | ||||
| 9N-6314 Y | [1] | OIL PAN GROUP | ||
| R | REMFG PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP14650132
4W-1494: ENGINE AR
4W1494 ENGINE AR-PART 2 OF 2
S/N 2Z4120-13750
S/N 2Z4120-13750
Parts for your 3208 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| LUBRICATION SYSTEM | ||||
| 9N-6007 Y | [2] | OIL FILTER ASSEMBLY | ||
| 9N-6336 Y | [1] | OIL LINES GROUP | ||
| 1N-4254 Y | [1] | OIL PUMP GROUP | ||
| 9N-2538 Y | [1] | OIL LEVEL GAUGE GROUP | ||
| COOLING SYSTEM | ||||
| 9N-3593 Y | [1] | OIL COOLER GROUP | ||
| 6N-0466 Y | [1] | WATER LINES GROUP | ||
| 9N-3654 Y | [1] | WATER PUMP GROUP | ||
| INTAKE & EXHAUST SYSTEM | ||||
| 9N-6618 Y | [1] | AIR LINES GROUP | ||
| 9N-3612 Y | [1] | EXHAUST MANIFOLD GROUP | ||
| 9N-6619 Y | [1] | INLET MANIFOLD GROUP | ||
| 2W-2589 Y | [1] | TURBOCHARGER GROUP | ||
| 9N-6606 Y | [1] | PCV LINES GROUP | ||
| FUEL SYSTEM & GOVERNOR | ||||
| 9L-6743 Y | [1] | GOVERNOR CONTROL GROUP | ||
| 1W-7320 Y | [1] | GOVERNOR & FUEL PUMP DRIVE GROUP | ||
| 9L-6925 Y | [1] | FUEL SYSTEM FASTENER GROUP | ||
| 4N-5868 Y | [1] | FUEL FILTER GROUP | ||
| 1W-4436 Y | [1] | FUEL FILTER LINES GROUP | ||
| 9N-3880 Y | [1] | FUEL INJECTION LINES GROUP | ||
| 4W-1476 Y | [1] | GOVERNOR & FUEL INJECTION PUMP GROUP | ||
| 4N-4314 Y | [1] | FUEL PRIMING PUMP GROUP | ||
| SERIAL NO. 2Z5377-UP | ||||
| GASKET KITS | ||||
| 6V-6401 | CENTRAL & LOWER STRUCTURE | |||
| 6V-3789 | FRONT STRUCTURE | |||
| 6V-9729 | FUEL SYSTEM | |||
| 6V-8043 | MULTIPLE CYLINDER HEAD | |||
| 6V-6402 | REAR STRUCTURE | |||
| 6V-8044 | SINGLE CYLINDER HEAD | |||
| 6V-8045 | TURBOCHARGER MOUNTING | |||
| 6V-6894 | WATER PUMP | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP14650133
4W-1988: ENGINE AR
4W1988 ENGINE AR-BLUEBIRD BODY CO-PART 1 OF 2
S/N 2Z3644-22732
S/N 2Z3644-22732
Parts for your 3208 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| CENTRAL STRUCTURE | ||||
| 9N-6356 RY | [1] | CYLINDER BLOCK GROUP | ||
| 9N-3596 Y | [1] | SINGLE CAMSHAFT GROUP | ||
| 9N-6222 Y | [1] | CRANKSHAFT GROUP | ||
| 9N-6435 Y | [8] | CONNECTING ROD & PISTON GROUP | ||
| 9N-0542 Y | [1] | CRANKSHAFT SEAL GROUP | ||
| 9L-6560 Y | [1] | CYLINDER BLOCK PANEL GROUP | ||
| UPPER STRUCTURE | ||||
| 9N-6106 Y | [1] | VALVE MECHANISM COVER GROUP | ||
| 9N-3600 RY | [1] | CYLINDER HEAD GROUP | ||
| 1W-1492 Y | [1] | LIFTING GROUP | ||
| 9N-3603 Y | [1] | VALVE MECHANISM GROUP | ||
| FRONT STRUCTURE | ||||
| 1W-6897 Y | [1] | PULLEY & DAMPER GROUP | ||
| 9N-5211 Y | [1] | FRONT HOUSING GROUP | ||
| 9N-5224 Y | [1] | ENGINE SUPPORT GROUP | ||
| 9N-0560 Y | [1] | FRONT HOUSING COVER GROUP | ||
| 2W-1126 Y | [1] | FAN DRIVE GROUP | ||
| 7N-7613 Y | [1] | WATER PUMP DRIVE GROUP | ||
| REAR STRUCTURE | ||||
| 9L-7861 Y | [1] | FLYWHEEL HOUSING COVER GROUP | ||
| 1W-3838 Y | [1] | FLYWHEEL HOUSING GROUP | ||
| 2W-7471 Y | [1] | FLYWHEEL FASTENER GROUP | ||
| LOWER STRUCTURE | ||||
| 9N-6314 Y | [1] | OIL PAN GROUP | ||
| R | REMFG PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP14650134
4W-1988: ENGINE AR
4W1988 ENGINE AR-BLUEBIRD BODY CO-PART 2 OF 2
S/N 2Z3644-22732
S/N 2Z3644-22732
Parts for your 3208 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| LUBRICATION SYSTEM | ||||
| 9N-6007 Y | [2] | OIL FILTER ASSEMBLY | ||
| 9N-6336 Y | [1] | OIL LINES GROUP | ||
| 1N-4254 Y | [1] | OIL PUMP GROUP | ||
| 9N-2538 Y | [1] | OIL LEVEL GAUGE GROUP | ||
| COOLING SYSTEM | ||||
| 9N-3593 Y | [1] | OIL COOLER GROUP | ||
| 7N-7844 Y | [1] | WATER LINES GROUP | ||
| S/N 2Z3644-2Z19938 | ||||
| 7C-0886 Y | [1] | WATER LINES GP | ||
| S/N 2Z19939-UP | ||||
| 9N-3654 Y | [1] | WATER PUMP GROUP | ||
| INTAKE & EXHAUST SYSTEM | ||||
| 9N-6618 Y | [1] | AIR LINES GROUP | ||
| 9N-3612 Y | [1] | EXHAUST MANIFOLD GROUP | ||
| 9N-6619 Y | [1] | INLET MANIFOLD GROUP | ||
| SERIAL NO.2Z3644-2Z7020 & 2Z14930-UP | ||||
| 4W-3787 Y | [1] | INLET MANIFOLD GROUP | ||
| SERIAL NO.2Z7021 TO 2Z14929 INCLUSIVE | ||||
| 2W-7470 Y | [1] | TURBOCHARGER GROUP | ||
| 9N-6606 Y | [1] | PCV LINES GROUP | ||
| FUEL SYSTEM & GOVERNOR | ||||
| 9N-6743 Y | [1] | GOVERNOR CONTROL GROUP | ||
| 9N-3607 Y | [1] | GOVERNOR & FUEL PUMP DRIVE GROUP | ||
| 9L-6925 Y | [1] | FUEL SYSTEM FASTENER GROUP | ||
| 4N-5868 Y | [1] | FUEL FILTER GROUP | ||
| 1W-4436 Y | [1] | FUEL FILTER LINES GROUP | ||
| 9N-3880 Y | [1] | FUEL INJECTION LINES GROUP | ||
| SERIAL NO. 2Z3644 TO 2Z13749 INCLUSIVE | ||||
| 7W-1998 Y | [1] | FUEL INJECTION LINES GROUP | ||
| SERIAL NO. 2Z13750-UP | ||||
| 4N-4314 Y | [1] | FUEL PRIMING PUMP GROUP | ||
| 9N-3774 Y | [1] | GOVERNOR & FUEL INJECTION PUMP GROUP | ||
| SERIAL NO. 2Z3644 TO 2Z13749 INCLUSIVE | ||||
| 7W-2288 Y | [1] | GOVERNOR & FUEL INJECTION PUMP GROUP | ||
| SERIAL NO. 2Z13750-UP | ||||
| GASKET KITS | ||||
| 6V-6401 | CENTRAL & LOWER STRUCTURE | |||
| 6V-3795 | FRONT STRUCTURE | |||
| 6V-9729 | FUEL SYSTEM | |||
| 6V-8043 | MULTIPLE CYLINDER HEAD | |||
| 6V-6402 | REAR STRUCTURE | |||
| 6V-8044 | SINGLE CYLINDER HEAD | |||
| 6V-8045 | TURBOCHARGER MOUNTING | |||
| 6V-6894 | WATER PUMP | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP14650135
4W-2123: ENGINE AR
4W2123 ENGINE AR-FORD MOTOR CO-PART 1 OF 2
S/N 2Z3721-13750
S/N 2Z3721-13750
Parts for your 3208 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| CENTRAL STRUCTURE | ||||
| 9N-6356 RY | [1] | CYLINDER BLOCK GROUP | ||
| 9N-3596 Y | [1] | SINGLE CAMSHAFT GROUP | ||
| 9N-6222 Y | [1] | CRANKSHAFT GROUP | ||
| 9N-6435 Y | [8] | CONNECTING ROD & PISTON GROUP | ||
| 9N-0542 Y | [1] | CRANKSHAFT SEAL GROUP | ||
| UPPER STRUCTURE | ||||
| 2W-6337 Y | [1] | VALVE MECHANISM COVER GROUP | ||
| 9N-3600 RY | [1] | CYLINDER HEAD GROUP | ||
| 4N-6808 Y | [1] | LIFTING GROUP | ||
| 9N-3603 Y | [1] | VALVE MECHANISM GROUP | ||
| FRONT STRUCTURE | ||||
| 1W-6897 Y | [1] | PULLEY & DAMPER GROUP | ||
| 9N-5211 Y | [1] | FRONT HOUSING GROUP | ||
| 9N-5224 Y | [1] | ENGINE SUPPORT GROUP | ||
| REAR STRUCTURE | ||||
| 9L-7861 Y | [1] | FLYWHEEL HOUSING COVER GROUP | ||
| 1W-3838 Y | [1] | FLYWHEEL HOUSING GROUP | ||
| 9N-0399 Y | [1] | FLYWHEEL FASTENER GROUP | ||
| LOWER STRUCTURE | ||||
| 9N-6314 Y | [1] | OIL PAN GROUP | ||
| R | REMFG PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP14650136
4W-2123: ENGINE AR
4W2123 ENGINE AR-FORD MOTOR CO-PART 2 OF 2
S/N 2Z3721-13750
S/N 2Z3721-13750
Parts for your 3208 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| LUBRICATION SYSTEM | ||||
| 9N-6168 Y | [1] | OIL LEVEL GAUGE GROUP | ||
| 9N-6007 Y | [2] | OIL FILTER ASSEMBLY | ||
| 9N-6334 Y | [1] | ENGINE OIL LINES GROUP | ||
| 1N-4254 Y | [1] | OIL PUMP GROUP | ||
| COOLING SYSTEM | ||||
| 9N-3593 Y | [1] | ENGINE OIL COOLER GROUP | ||
| 2W-0674 Y | [1] | WATER LINES GROUP | ||
| 9N-3654 Y | [1] | WATER PUMP GROUP | ||
| INTAKE & EXHAUST SYSTEM | ||||
| 9N-6606 Y | [1] | PCV LINES GROUP | ||
| 9N-6618 Y | [1] | AIR LINES GROUP | ||
| 9N-3612 Y | [1] | EXHAUST MANIFOLD GROUP | ||
| 9N-6622 Y | [1] | INLET MANIFOLD GROUP | ||
| 2W-7473 Y | [1] | TURBOCHARGER GROUP | ||
| FUEL SYSTEM & GOVERNOR | ||||
| 9N-0425 Y | [1] | GOVERNOR CONTROL GROUP | ||
| 9N-3607 Y | [1] | GOVERNOR & FUEL PUMP DRIVE GROUP | ||
| 9L-6925 Y | [1] | FUEL SYSTEM FASTENER GROUP | ||
| 9N-0396 Y | [1] | FUEL FILTER GROUP | ||
| 1W-9267 Y | [1] | FUEL FILTER LINES GROUP | ||
| 9N-3880 Y | [1] | FUEL INJECTION LINES GROUP | ||
| 4N-4314 Y | [1] | FUEL PRIMING PUMP GROUP | ||
| 9N-3774 Y | [1] | GOVERNOR & FUEL INJECTION PUMP GROUP | ||
| 2W-6320 Y | [1] | WATER SEPARATOR GROUP | ||
| 5N-8317 | [2] | FILM--3208 ON R.H.& L.H.VALVE COVERS | ||
| GASKET KITS | ||||
| 6V-6401 | CENTRAL & LOWER STRUCTURE | |||
| 6V-3795 | FRONT STRUCTURE | |||
| 6V-9729 | FUEL SYSTEM | |||
| 6V-8043 | MULTIPLE CYLINDER HEAD | |||
| 6V-6402 | REAR STRUCTURE | |||
| 6V-8044 | SINGLE CYLINDER HEAD | |||
| 6V-8045 | TURBOCHARGER MOUNTING | |||
| 6V-6894 | WATER PUMP | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP14650137
4W-2854: ENGINE AR
4W2854 ENGINE AR-FORD AUSTRALIA-PART 1 OF 2
S/N 2Z4076-UP
S/N 2Z4076-UP
Parts for your 3208 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| CENTRAL STRUCTURE | ||||
| 9N-6356 RY | [1] | CYLINDER BLOCK GROUP | ||
| 9N-3596 Y | [1] | SINGLE CAMSHAFT GROUP | ||
| 9N-6222 Y | [1] | CRANKSHAFT GROUP | ||
| 9N-6435 Y | [8] | CONNECTING ROD & PISTON GROUP | ||
| 9N-0542 Y | [1] | CRANKSHAFT SEAL GROUP | ||
| UPPER STRUCTURE | ||||
| 9N-0730 Y | [1] | VALVE MECHANISM COVER GROUP | ||
| 9N-3600 RY | [1] | CYLINDER HEAD GROUP | ||
| 2W-0672 Y | [1] | LIFTING GROUP | ||
| 9N-3603 Y | [1] | VALVE MECHANISM GROUP | ||
| FRONT STRUCTURE | ||||
| 9N-0560 Y | [1] | FRONT HOUSING COVER GROUP | ||
| 1W-6897 Y | [1] | PULLEY & DAMPER GROUP | ||
| 9N-5211 Y | [1] | FRONT HOUSING GROUP | ||
| 9N-5224 Y | [1] | ENGINE SUPPORT GROUP | ||
| REAR STRUCTURE | ||||
| 9L-7861 Y | [1] | FLYWHEEL HOUSING COVER GROUP | ||
| 1W-3838 Y | [1] | FLYWHEEL HOUSING GROUP | ||
| SERIAL NO. 2Z4076 TO 2Z9101 INCLUSIVE | ||||
| 4W-9804 Y | [1] | FLYWHEEL HOUSING GROUP | ||
| SERIAL NO. 2Z9102-UP | ||||
| 9N-0399 Y | [1] | FLYWHEEL FASTENER GROUP | ||
| LOWER STRUCTURE | ||||
| 9N-6314 Y | [1] | OIL PAN GROUP | ||
| R | REMFG PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP14650138
4W-2854: ENGINE AR
4W2854 ENGINE AR-FORD AUSTRALIA-PART 2 OF 2
S/N 2Z4076-UP
S/N 2Z4076-UP
Parts for your 3208 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| LUBRICATION SYSTEM | ||||
| 9N-6007 Y | [2] | OIL FILTER ASSEMBLY | ||
| 9N-6334 Y | [1] | OIL LINES GROUP | ||
| 1N-4254 Y | [1] | OIL PUMP GROUP | ||
| 4W-4423 Y | [1] | OIL LEVEL GAUGE GROUP | ||
| COOLING SYSTEM | ||||
| 9N-3593 Y | [1] | OIL COOLER GROUP | ||
| 9N-6572 Y | [1] | WATER LINES GROUP | ||
| 9N-3654 Y | [1] | WATER PUMP GROUP | ||
| INTAKE & EXHAUST SYSTEM | ||||
| 1W-1599 Y | [1] | AIR LINES GROUP | ||
| 1W-1448 Y | [1] | EXHAUST MANIFOLD GROUP | ||
| 4W-3787 Y | [1] | INLET MANIFOLD GROUP | ||
| SERIAL NO. 2Z4076 TO 2Z14929 INCLUSIVE | ||||
| 9N-6619 Y | [1] | INLET MANIFOLD GROUP | ||
| SERIAL NO. 2Z14930-UP | ||||
| 2W-7470 Y | [1] | TURBOCHARGER GROUP | ||
| 7N-8464 Y | [1] | PCV LINES GROUP | ||
| FUEL SYSTEM & GOVERNOR | ||||
| 9N-0425 Y | [1] | GOVERNOR CONTROL GROUP | ||
| 9N-3607 Y | [1] | GOVERNOR & FUEL PUMP DRIVE GROUP | ||
| 9L-6925 Y | [1] | FUEL SYSTEM FASTENER GROUP | ||
| 2W-0054 Y | [1] | FUEL FILTER GROUP | ||
| 2W-2372 Y | [1] | FUEL FILTER LINES GROUP | ||
| 9N-3880 Y | [1] | FUEL INJECTION LINES GROUP | ||
| SERIAL NO. 2Z4076 TO 2Z13749 INCLUSIVE | ||||
| 7W-1998 Y | [1] | FUEL INJECTION LINES GROUP | ||
| SERIAL NO. 2Z13750-UP | ||||
| 4W-4202 Y | [1] | GOVERNOR & FUEL INJECTION PUMP GROUP | ||
| SERIAL NO. 2Z4076 TO 2Z13749 INCLUSIVE | ||||
| 7W-4198 Y | [1] | GOVERNOR & FUEL INJECTION PUMP GROUP | ||
| SERIAL NO. 2Z13750-34220 | ||||
| 7C-8960 Y | [1] | GOVERNOR & FUEL INJECTION PUMP GROUP | ||
| SERIAL NO. 2Z34221-UP | ||||
| GASKET KITS | ||||
| 6V-6401 | CENTRAL & LOWER STRUCTURE | |||
| 6V-3789 | FRONT STRUCTURE | |||
| 6V-9729 | FUEL SYSTEM | |||
| 6V-8043 | MULTIPLE CYLINDER HEAD | |||
| 6V-6402 | REAR STRUCTURE | |||
| 6V-8044 | SINGLE CYLINDER HEAD | |||
| 6V-8045 | TURBOCHARGER MOUNTING | |||
| 6V-6894 | WATER PUMP | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP14650139
4W-3723: ENGINE AR
4W3723 ENGINE AR-FORD AUSTRALIA-PART 1 OF 2
S/N 2Z4076-13750
S/N 2Z4076-13750
Parts for your 3208 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| CENTRAL STRUCTURE | ||||
| 9N-6356 RY | [1] | CYLINDER BLOCK GROUP | ||
| 9N-3596 Y | [1] | SINGLE CAMSHAFT GROUP | ||
| 9N-6222 Y | [1] | CRANKSHAFT GROUP | ||
| 9N-6435 Y | [8] | CONNECTING ROD & PISTON GROUP | ||
| 9N-0542 Y | [1] | CRANKSHAFT SEAL GROUP | ||
| UPPER STRUCTURE | ||||
| 2W-6337 Y | [1] | VALVE MECHANISM COVER GROUP | ||
| 9N-3600 RY | [1] | CYLINDER HEAD GROUP | ||
| 4N-6808 Y | [1] | LIFTING GROUP | ||
| 9N-3603 Y | [1] | VALVE MECHANISM GROUP | ||
| FRONT STRUCTURE | ||||
| 1W-6897 Y | [1] | PULLEY & DAMPER GROUP | ||
| 9N-5211 Y | [1] | FRONT HOUSING GROUP | ||
| 9N-5224 Y | [1] | ENGINE SUPPORT GROUP | ||
| REAR STRUCTURE | ||||
| 9L-7861 Y | [1] | FLYWHEEL HOUSING COVER GROUP | ||
| 1W-3838 Y | [1] | FLYWHEEL HOUSING GROUP | ||
| SERIAL NO. 2Z4076 TO 2Z9101 INCLUSIVE | ||||
| 4W-9804 Y | [1] | FLYWHEEL HOUSING GROUP | ||
| SERIAL NO. 2Z9102-UP | ||||
| 9N-0399 Y | [1] | FLYWHEEL FASTENER GROUP | ||
| LOWER STRUCTURE | ||||
| 9N-6314 Y | [1] | OIL PAN GROUP | ||
| R | REMFG PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ENGINE ARRANGEMENT
ENGINE AR
Truck Engine News
New Engines Rated @ 160 kW (210 hp) @ 2600 rpm Must Be Rerated When Used To Replace 2800 rpm Engines
1987/07/01
1987/07/01
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Engine News
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1978/01/18
1978/01/18
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Operation and Maintenance Manual
Special Instruction
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Installation of 3208 Remanufactured Engine (Natural Aspiration) for Industrial, Vehicular or Lift Truck Applications{1000}
Installation of 3208 Remanufactured Engine (Natural Aspiration) for Industrial, Vehicular or Lift Truck Applications{1000}
Installation of 3208 Remanufactured Engine (Natural Aspiration) for Industrial, Vehicular or Lift Truck Applications{1000}
Installation of 3208T Remanufactured Engine for Industrial, Truck and Electrical Power Generation (EPG) Engines{1200}
Installation of 3208T Remanufactured Engine for Industrial, Truck and Electrical Power Generation (EPG) Engines{1200}
Installation of 3208T Remanufactured Engine for Industrial, Truck and Electrical Power Generation (EPG) Engines{1200}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Guideline for Unauthorized Modifications to On-Highway Engines{0685, 1000, 1000}
Guideline for Unauthorized Modifications to On-Highway Engines{0685, 1000, 1000}
Guideline for Unauthorized Modifications to On-Highway Engines{0685, 1000, 1000}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Differences in Appearance of Cat <SUP>®</SUP> Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Technical Information Bulletin
Remanufactured Water Pumps For 3204 And 3208 Engines
Remanufactured Water Pumps For 3204 And 3208 Engines
Remanufactured Water Pumps For 3204 And 3208 Engines
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Specifications
Tool Operating Manual
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
Reuse And Salvage Guidelines
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Contamination Control Guidelines
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Applied Failure Analysis
Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Information Release Memo
Service Magazine
Important Differences In Engine Arrangements On 3208 Engines Equipped With Turbochargers{1000}
1984/11/26
1984/11/26
Remanufactured Cylinder Head Group For NA Engines Must Not Be Installed On T Engines{1100,1108}
1985/08/05
1985/08/05
Caterpillar Offers Remanufactured Turbocharged 3208 Engines At Significant Savings{1000,7754}
1985/11/11
1985/11/11
A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2000/12/25
2000/12/25
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
Caterpillar Parts SIS Catalog 3208 :
Truck sale:
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -



