ENGINE ARRANGEMENT
ENGINE ARBASIC ENGINE
CYLINDER BLOCK GPENGINE ARRANGEMENT
ENGINE AR#SEBP14650220
7W-9388: ENGINE AR
7W9388 ENGINE AR-BLUEBIRD BODY CO-PART 2 OF 2
S/N 2Z16431-UP
S/N 2Z16431-UP
Parts for your 3208 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 9N-3612 Y | [1] | MANIFOLD GP-EXHAUST | ||
| 9N-6619 Y | [1] | MANIFOLD GP-INLET | ||
| 9N-3603 Y | [1] | MECHANISM GP-VALVE-A | ||
| 9N-6314 Y | [1] | PAN GP-OIL | ||
| 9L-6560 Y | [1] | PANEL GP-CYLINDER BLOCK | ||
| 9N-6388 Y | [1] | PANEL GP-SOUND | ||
| S/N 2Z16431-30882 | ||||
| 9N-6435 Y | [8] | PISTON GP-CONNECTING ROD & | ||
| 4N-4314 Y | [1] | PUMP GP-FUEL PRIMING | ||
| 7W-2288 Y | [1] | PUMP GP-GOVERNOR & FUEL INJ | ||
| S/N 2Z16431-34220 | ||||
| 7C-8931 Y | [1] | PUMP GP-GOVERNOR & FUEL INJ | ||
| S/N 2Z34221-UP | ||||
| 1N-4254 Y | [1] | PUMP GP-OIL | ||
| 9N-3654 Y | [1] | PUMP GP-WATER | ||
| 9N-0542 Y | [1] | SEAL GP-CRANKSHAFT | ||
| 9N-5224 Y | [1] | SUPPORT GP-ENGINE | ||
| 2W-7470 Y | [1] | TURBOCHARGER GP | ||
| GASKET KITS AVAILABLE | ||||
| 8C-6884 | CENTRAL & LOWER STRUCTURE | |||
| 6V-3789 | FRONT STRUCTURE | |||
| 8C-6885 | FUEL SYSTEM | |||
| 8C-7572 | MULTIPLE CYLINDER HEAD | |||
| 6V-6402 | REAR STRUCTURE | |||
| 8C-7573 | SINGLE CYLINDER HEAD | |||
| 6V-8045 | TURBOCHARGER MOUNTING | |||
| 6V-6894 | WATER PUMP | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP14650221
9Y-2597: ENGINE AR
9Y2597 ENGINE AR-ATAAC-PART 1 OF 2
CARB CERTIFIED-THOMAS BUILT BUSES
3208 DI ATAAC ENGINE RATED AT 275 BHP
S/N 2Z37857-UP
CARB CERTIFIED-THOMAS BUILT BUSES
3208 DI ATAAC ENGINE RATED AT 275 BHP
S/N 2Z37857-UP
Parts for your 3208 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 7W-8905 Y | [1] | BELT TIGHTENER GP | ||
| 9N-3596 Y | [1] | CAMSHAFT GP-SINGLE | ||
| 9L-6743 Y | [1] | CONTROL GP-GOVERNOR | ||
| 9N-3593 Y | [1] | COOLER GP-ENGINE OIL | ||
| 9L-7861 Y | [1] | COVER GP-FLYWHEEL HOUSING | ||
| 9N-0560 Y | [1] | COVER GP-FRONT HOUSING | ||
| 7W-9192 Y | [1] | COVER GP-VALVE MECHANISM | ||
| 9N-6222 Y | [1] | CRANKSHAFT GP | ||
| 9N-6356 RY | [1] | CYLINDER BLOCK GP | ||
| 9N-3600 RY | [1] | CYLINDER HEAD GP | ||
| 9N-3607 Y | [1] | DRIVE GP-GOVERNOR & FUEL PUMP | ||
| 9Y-2056 Y | [1] | FASTENER GP-FLYWHEEL | ||
| 9L-6925 Y | [1] | FASTENER GP-FUEL PUMP HOUSING | ||
| 9N-6007 Y | [2] | FILTER AS-ENGINE OIL | ||
| 4N-5868 Y | [1] | FILTER GP-FUEL | ||
| 7C-5262 Y | [1] | GAUGE GP-OIL LEVEL | ||
| 4W-9804 Y | [1] | HOUSING GP-FLYWHEEL | ||
| 9N-5211 Y | [1] | HOUSING GP-FRONT | ||
| 7C-3997 Y | [1] | LIFTING GP | ||
| 7W-9482 Y | [1] | LINES GP-AIR | ||
| 7C-6256 Y | [1] | LINES GP-ENGINE OIL | ||
| 2W-4818 Y | [1] | LINES GP-FUEL FILTER | ||
| 7W-1998 Y | [1] | LINES GP-FUEL INJECTION | ||
| 7C-4534 Y | [1] | LINES GP-WATER | ||
| R | REMFG PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP14650222
9Y-2597: ENGINE AR
9Y2597 ENGINE AR-ATAAC-PART 2 OF 2
CARB CERTIFIED-THOMAS BUILT BUSES
3208 DI ATAAC ENGINE RATED AT 275 BHP
S/N 2Z37857-UP
CARB CERTIFIED-THOMAS BUILT BUSES
3208 DI ATAAC ENGINE RATED AT 275 BHP
S/N 2Z37857-UP
Parts for your 3208 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 9N-3612 Y | [1] | MANIFOLD GP-EXHAUST | ||
| 7W-9142 Y | [1] | MANIFOLD GP-INLET | ||
| 4N-9315 Y | [1] | MOUNTING GP-ALTERNATOR | ||
| 1W-7530 Y | [1] | MOUNTING GP-TURBOCHARGER | ||
| 9N-6314 Y | [1] | PAN GP-ENGINE OIL | ||
| 1W-6897 Y | [1] | PULLEY & DAMPER GP | ||
| 2W-4470 Y | [1] | PULLEY GP-AUXILIARY DRIVE | ||
| 4N-4314 Y | [1] | PUMP GP-FUEL PRIMING | ||
| 7C-8970 Y | [1] | PUMP GP-GOVERNOR & FUEL INJECTION | ||
| 1N-4254 Y | [1] | PUMP GP-OIL | ||
| 9N-3654 Y | [1] | PUMP GP-WATER | ||
| 9N-6435 Y | [8] | ROD & PISTON GP | ||
| 9N-0542 Y | [1] | SEAL GP-CRANKSHAFT | ||
| 9N-5621 Y | [1] | SEPARATOR GP-WATER | ||
| 9N-5224 Y | [1] | SUPPORT GP-ENGINE | ||
| 7W-9193 Y | [1] | TURBOCHARGER GP | ||
| 9N-3603 Y | [1] | VALVE MECHANISM GP | ||
| GASKET KITS AVAILABLE: | ||||
| 8C-6884 | CENTRAL & LOWER STRUCTURE | |||
| 6V-3789 | FRONT STRUCTURE | |||
| 8T-6989 | FUEL SYSTEM | |||
| 7X-2446 | MULTIPLE CYLINDER HEAD | |||
| 6V-6402 | REAR STRUCTURE | |||
| 7X-2447 | SINGLE CYLINDER HEAD | |||
| 6V-3787 | TURBOCHARGER MOUNTING | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP14650223
9Y-2598: ENGINE AR
9Y2598 ENGINE AR-ATAAC-PART 1 OF 2
CARB-CERTIFIED, THOMAS BUILT BUSES
3208 DI ATAAC ENGINE RATED AT 300 BHP
S/N 2Z37857-49127
CARB-CERTIFIED, THOMAS BUILT BUSES
3208 DI ATAAC ENGINE RATED AT 300 BHP
S/N 2Z37857-49127
Parts for your 3208 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 7W-8905 Y | [1] | BELT TIGHTENER GP | ||
| 9N-3596 Y | [1] | CAMSHAFT GP-SINGLE | ||
| 9L-6743 Y | [1] | CONTROL GP-GOVERNOR | ||
| 9N-3593 Y | [1] | COOLER GP-ENGINE OIL | ||
| 9L-7861 Y | [1] | COVER GP-FLYWHEEL HOUSING | ||
| 9N-0560 Y | [1] | COVER GP-FRONT HOUSING | ||
| 7W-9192 Y | [1] | COVER GP-VALVE MECHANISM | ||
| 9N-6222 Y | [1] | CRANKSHAFT GP | ||
| 9N-6356 RY | [1] | CYLINDER BLOCK GP | ||
| 9N-3600 RY | [1] | CYLINDER HEAD GP | ||
| 9N-3607 Y | [1] | DRIVE GP-GOVERNOR & FUEL PUMP | ||
| 9Y-2056 Y | [1] | FASTENER GP-FLYWHEEL | ||
| 9L-6925 Y | [1] | FASTENER GP-FUEL PUMP HOUSING | ||
| 9N-6007 Y | [2] | FILTER AS-ENGINE OIL | ||
| S/N 2Z37857-46267 | ||||
| 9Y-0858 Y | [1] | FILTER AS. ENGINE OIL | ||
| S/N 2Z46268-UP | ||||
| 4N-5868 Y | [1] | FILTER GP-FUEL | ||
| 7C-5262 Y | [1] | GAUGE GP-OIL LEVEL | ||
| 4W-9804 Y | [1] | HOUSING GP-FLYWHEEL | ||
| S/N 2Z37857-46267 | ||||
| 7C-6032 Y | [1] | HOUSING GP-FLYWHEEL | ||
| S/N 2Z46268-UP | ||||
| 9N-5211 Y | [1] | HOUSING GP-FRONT | ||
| 7C-3997 Y | [1] | LIFTING GP | ||
| 7W-9482 Y | [1] | LINES GP-AIR | ||
| 7C-6256 Y | [1] | LINES GP-ENGINE OIL | ||
| 1W-4436 Y | [1] | LINES GP-FUEL FILTER | ||
| S/N 2Z37857-42006 | ||||
| 2W-4818 Y | [1] | LINES GP-FUEL FILTER | ||
| S/N 2Z42007-UP | ||||
| 7W-1998 Y | [1] | LINES GP-FUEL INJECTION | ||
| 7C-4534 Y | [1] | LINES GP-WATER | ||
| R | REMFG PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP14650224
9Y-2598: ENGINE AR
9Y2598 ENGINE AR-ATAAC-PART 2 OF 2
CARB,CERTIFIED, THOMAS BUILT BUSES
3208 DI ATAAC ENGINE RATED AT 300 BHP
S/N 2Z37857-49127
CARB,CERTIFIED, THOMAS BUILT BUSES
3208 DI ATAAC ENGINE RATED AT 300 BHP
S/N 2Z37857-49127
Parts for your 3208 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 9N-3612 Y | [1] | MANIFOLD GP-EXHAUST | ||
| 7W-9142 Y | [1] | MANIFOLD GP-INLET | ||
| 4N-9315 Y | [1] | MOUNTING GP-ALTERNATOR | ||
| 1W-7530 Y | [1] | MOUNTING GP-TURBOCHARGER | ||
| 9N-6314 Y | [1] | PAN GP-ENGINE OIL | ||
| 1W-6897 Y | [1] | PULLEY & DAMPER GP | ||
| 2W-4470 Y | [1] | PULLEY GP-AUXILIARY DRIVE | ||
| 4N-4314 Y | [1] | PUMP GP-FUEL PRIMING | ||
| 7C-8970 Y | [1] | PUMP GP-GOVERNOR & FUEL INJECTION | ||
| 1N-4254 Y | [1] | PUMP GP-OIL | ||
| 9N-3654 Y | [1] | PUMP GP-WATER | ||
| 9N-6435 Y | [8] | ROD & PISTON GP | ||
| 9N-0542 Y | [1] | SEAL GP-CRANKSHAFT | ||
| 9N-5621 Y | [1] | SEPARATOR GP-WATER | ||
| 9N-5224 Y | [1] | SUPPORT GP-ENGINE | ||
| 7W-9193 Y | [1] | TURBOCHARGER GP | ||
| S/N 2Z37857-42006 | ||||
| 7W-7512 Y | [1] | TURBOCHARGER GP | ||
| S/N 2Z42007-UP | ||||
| 9N-3603 Y | [1] | VALVE MECHANISM GP | ||
| GASKET KITS AVAILABLE: | ||||
| 8C-6884 | CENTRAL & LOWER STRUCTURE | |||
| 6V-3789 | FRONT STRUCTURE | |||
| 8T-6989 | FUEL SYSTEM | |||
| 7X-2446 | MULTIPLE CYLINDER HEAD | |||
| 6V-6402 | REAR STRUCTURE | |||
| 7X-2447 | SINGLE CYLINDER HEAD | |||
| 6V-3787 | TURBOCHARGER MOUNTING | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP14650225
9N-3931: CYLINDER BLOCK GP
9N3931 CYLINDER BLOCK GROUP
ALSO PART OF 1W1862 SHORT CYLINDER BLOCK GROUP LISTED ON PAGE 95
9L6065 COVER PARTS ARE SHOWN ON PAGE 97. FOR FIELD REPLACEMENT ORDER
2W48 CYLINDER BLOCK GROUP SHOWN ON PAGE 93 & 2W49 BLOCK KIT
ALSO PART OF 1W1862 SHORT CYLINDER BLOCK GROUP LISTED ON PAGE 95
9L6065 COVER PARTS ARE SHOWN ON PAGE 97. FOR FIELD REPLACEMENT ORDER
2W48 CYLINDER BLOCK GROUP SHOWN ON PAGE 93 & 2W49 BLOCK KIT
Parts for your 3208 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9L-7831 | [10] | BOLT | |
| 2. | 9L-9009 | [10] | WASHER | |
| 3. | 9N-3759 | [5] | CAP-CRANKSHAFT BEARING | |
| 4. | 9N-5246 | [5] | BEARING-CAMSHAFT | |
| 5. | 9L-8002 | [8] | DOWEL-HOLLOW | |
| 6. | 4K-8603 | [1] | PLUG-CUP (25.73 MM DIA) | |
| 4D-1322 | [1] | RING-RETAINING | ||
| 7. | 3H-5552 | [6] | PLUG-CUP | |
| 8. | 2B-0858 | [1] | PLUG-PIPE | |
| 9. | 8M-3023 | [8] | ORIFICE-JET | |
| 10. | 9L-6065 Y | [1] | COVER GP-CYLINDER BLOCK | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP14650226
9N-6603: CYLINDER BLOCK GP
9N6603 CYLINDER BLOCK GROUP
ALSO PART OF 2W1863 & 2W1865 SHORT CYLINDER BLOCK GROUPS LISTED ON
PAGES 95 & 97. 9L6065 COVER PARTS ARE SHOWN ON PAGE 97. FOR FIELD
REPLACEMENT ORDER 2W48 CYLINDER BLOCK GROUP SHOWN ON PAGE 93 &
2W51 BLOCK KIT
ALSO PART OF 2W1863 & 2W1865 SHORT CYLINDER BLOCK GROUPS LISTED ON
PAGES 95 & 97. 9L6065 COVER PARTS ARE SHOWN ON PAGE 97. FOR FIELD
REPLACEMENT ORDER 2W48 CYLINDER BLOCK GROUP SHOWN ON PAGE 93 &
2W51 BLOCK KIT
Parts for your 3208 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9N-6357 | [1] | CYLINDER BLOCK AS | |
| 2. | 9L-7831 | [10] | BOLT | |
| 3. | 9L-9009 | [10] | WASHER | |
| 4. | 9N-3759 | [5] | CAP-CRANKSHAFT BEARING | |
| 5. | 3H-5552 | [6] | PLUG-CUP | |
| 6. | 4K-8603 | [1] | PLUG-CUP | |
| 7. | 4D-1322 | [1] | RING-RETAINING | |
| 8. | 9L-6065 Y | [1] | COVER GP-CYLINDER BLOCK | |
| 9. | 2B-0858 | [1] | PLUG-PIPE | |
| 10. | 7M-4593 | [8] | PLUG | |
| 11. | 9N-5246 | [5] | BEARING-CAMSHAFT | |
| 12. | 9L-8002 | [8] | DOWEL-HOLLOW | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP14650227
9N-6356: CYLINDER BLOCK GP
9N6356 CYLINDER BLOCK GROUP
SERIAL NO. 2Z1 TO 2Z4071 INCLUSIVE. ALSO PART OF 2W1864 SHORT CYLINDER
BLOCK GROUP LISTED ON PAGE 96. 9L6065 COVER PARTS ARE SHOWN ON PAGE 97.
FOR FIELD REPLACEMENT ORDER 2W48 CYLINDER BLOCK GROUP SHOWN ON PAGE 93 &
2W51 BLOCK KIT
SERIAL NO. 2Z1 TO 2Z4071 INCLUSIVE. ALSO PART OF 2W1864 SHORT CYLINDER
BLOCK GROUP LISTED ON PAGE 96. 9L6065 COVER PARTS ARE SHOWN ON PAGE 97.
FOR FIELD REPLACEMENT ORDER 2W48 CYLINDER BLOCK GROUP SHOWN ON PAGE 93 &
2W51 BLOCK KIT
Parts for your 3208 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9N-6357 | [1] | CYLINDER BLOCK AS | |
| 2. | 9L-7831 | [10] | BOLT | |
| 3. | 9L-9009 | [10] | WASHER | |
| 4. | 9N-3759 | [5] | CAP-CRANKSHAFT BEARING | |
| 5. | 3H-5552 | [6] | PLUG-CUP | |
| 6. | 4K-8603 | [1] | PLUG-CUP | |
| 7. | 4D-1322 | [1] | RING-RETAINING | |
| 8. | 9L-6065 Y | [1] | COVER GP-CYLINDER BLOCK | |
| 9. | 2B-0858 | [1] | PLUG-PIPE | |
| 10. | 8M-3023 | [8] | ORIFICE-JET | |
| 11. | 9N-5246 | [5] | BEARING-CAMSHAFT | |
| 12. | 9L-8002 | [8] | DOWEL-HOLLOW | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP14650228
9N-6356: CYLINDER BLOCK GP
9N6356 CYLINDER BLOCK GP
S/N 2Z4072-UP
9L6065-PAGE 97. ALSO PART OF 2W1864 SHORT CYLINDER BLOCK
FOR FIELD REPLACEMENT ORDER 2W8035-PAGE 94 PLUS 2W51 KIT
4W6143 SLEEVE IS AVAILABLE
S/N 2Z4072-UP
9L6065-PAGE 97. ALSO PART OF 2W1864 SHORT CYLINDER BLOCK
FOR FIELD REPLACEMENT ORDER 2W8035-PAGE 94 PLUS 2W51 KIT
4W6143 SLEEVE IS AVAILABLE
Parts for your 3208 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2W-8123 C | [1] | CYLINDER BLOCK AS | |
| 2. | 9L-7831 | [10] | BOLT | |
| 3. | 9L-9009 | [10] | WASHER | |
| 4. | 9N-3759 | [5] | CAP-CRANKSHAFT BEARING | |
| 5. | 3H-5552 | [6] | PLUG-CUP | |
| 6. | 4K-8603 | [1] | PLUG-CUP | |
| 7. | 4D-1322 | [1] | RING-RETAINING | |
| 8. | 9L-8002 | [8] | DOWEL-HOLLOW | |
| 9. | 2B-0858 | [1] | PLUG-PIPE | |
| 10. | 8M-3023 | [8] | ORIFICE-JET | |
| 11. | 9N-5246 | [5] | BEARING-CAMSHAFT | |
| 9L-6065 FY | [1] | COVER GP-CYLINDER BLOCK | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP14650229
2W-8033: CYLINDER BLOCK GP
2W8033 CYLINDER BLOCK GROUP
ALSO PART OF 2W9741 & 2W1865 SHORT CYLINDER BLOCK GROUPS LISTED ON
PAGES 96 & 97. FOR FIELD REPLACEMENT ORDER 2W8035 CYLINDER BLOCK GROUP
SHOWN ON PAGE 94 & 2W51 BLOCK KIT. 9L6065 COVER PARTS ARE SHOWN ON PAGE 97
ALSO PART OF 2W9741 & 2W1865 SHORT CYLINDER BLOCK GROUPS LISTED ON
PAGES 96 & 97. FOR FIELD REPLACEMENT ORDER 2W8035 CYLINDER BLOCK GROUP
SHOWN ON PAGE 94 & 2W51 BLOCK KIT. 9L6065 COVER PARTS ARE SHOWN ON PAGE 97
Parts for your 3208 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9L-8002 | [8] | DOWEL-HOLLOW | |
| 2. | 9L-7831 | [10] | BOLT | |
| 3. | 9L-9009 | [10] | WASHER | |
| 4. | 9N-3759 | [5] | CAP-CRANKSHAFT BEARING | |
| 5. | 3H-5552 | [6] | PLUG-CUP | |
| 6. | 4K-8603 | [1] | PLUG-CUP | |
| 7. | 4D-1322 | [1] | RING-RETAINING | |
| 8. | 9L-6065 Y | [1] | COVER GP-CYLINDER BLOCK | |
| 9. | 2B-0858 | [1] | PLUG-PIPE | |
| 10. | 7M-4593 | [8] | PLUG | |
| 11. | 9N-5246 | [5] | BEARING-CAMSHAFT | |
| Y | SEPARATE ILLUSTRATION | |||
Information:
ENGINE ARRANGEMENT
ENGINE AR
Truck Engine News
New Engines Rated @ 160 kW (210 hp) @ 2600 rpm Must Be Rerated When Used To Replace 2800 rpm Engines
1987/07/01
1987/07/01
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Engine News
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1978/01/18
1978/01/18
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Operation and Maintenance Manual
Special Instruction
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Installation of 3208 Remanufactured Engine (Natural Aspiration) for Industrial, Vehicular or Lift Truck Applications{1000}
Installation of 3208 Remanufactured Engine (Natural Aspiration) for Industrial, Vehicular or Lift Truck Applications{1000}
Installation of 3208 Remanufactured Engine (Natural Aspiration) for Industrial, Vehicular or Lift Truck Applications{1000}
Installation of 3208T Remanufactured Engine for Industrial, Truck and Electrical Power Generation (EPG) Engines{1200}
Installation of 3208T Remanufactured Engine for Industrial, Truck and Electrical Power Generation (EPG) Engines{1200}
Installation of 3208T Remanufactured Engine for Industrial, Truck and Electrical Power Generation (EPG) Engines{1200}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Guideline for Unauthorized Modifications to On-Highway Engines{0685, 1000, 1000}
Guideline for Unauthorized Modifications to On-Highway Engines{0685, 1000, 1000}
Guideline for Unauthorized Modifications to On-Highway Engines{0685, 1000, 1000}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Differences in Appearance of Cat <SUP>®</SUP> Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Technical Information Bulletin
Remanufactured Water Pumps For 3204 And 3208 Engines
Remanufactured Water Pumps For 3204 And 3208 Engines
Remanufactured Water Pumps For 3204 And 3208 Engines
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Specifications
Tool Operating Manual
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
Reuse And Salvage Guidelines
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Contamination Control Guidelines
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Applied Failure Analysis
Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Information Release Memo
Service Magazine
Important Differences In Engine Arrangements On 3208 Engines Equipped With Turbochargers{1000}
1984/11/26
1984/11/26
Remanufactured Cylinder Head Group For NA Engines Must Not Be Installed On T Engines{1100,1108}
1985/08/05
1985/08/05
Caterpillar Offers Remanufactured Turbocharged 3208 Engines At Significant Savings{1000,7754}
1985/11/11
1985/11/11
A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2000/12/25
2000/12/25
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
Caterpillar Parts SIS Catalog 3208 :
Truck sale:
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -



