AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7C8930 GOVERNOR & FUEL INJECTION PUMP GP-PART 3 OF 5 TYPE 1 PART OF 7C8969 & 7C8971 GOVERNOR & FUEL INJECTION PUMPS 3208


FUEL SYSTEM
GOVERNOR GP

TRUCK ENGINE 3208 TRUCK ENGINE 02Z
 3208 TRUCK ENGINE 02Z00001-40744 SEBP1465 3208 02Z   (1980)

FUEL SYSTEM

GOVERNOR GP
PUMP GP-GOV & FUEL INJ
7C-8930 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8930 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8930 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8930 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8930 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8930 PUMP GP-GOV & FUEL INJ
 

#SEBP14650700
 

7C-8930: PUMP GP-GOV & FUEL INJ

7C8930 GOVERNOR & FUEL INJECTION PUMP GP-PART 3 OF 5
TYPE 1
PART OF 7C8969 & 7C8971 GOVERNOR & FUEL INJECTION PUMPS
c406612 SEBP1465
7C8930 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1615 [7] BOLT  
2. 3J-7354 [1] SEAL-O-RING  
3. 9S-4182 [1] PLUG  
4. 8H-3127 [2] BOLT  
5. 9S-9332 [1] FITTING-ELBOW  
6. 6N-1729 [1] COVER-PUMP HOUSING  
7. 6D-3031 [4] SCREW-SOCKET HEAD  
8. 4N-0941 [1] LEVER-LIMITER  
9. 4N-0505 [1] GASKET-HOUSING  
10. 4N-0935 [1] HOUSING AS (SHUT-OFF)  
  4N-3713 [1] SEAL-LIP TYPE  
11. 4N-0595 [1] GASKET-TOP COVER  
12. 9N-5861 [1] HOUSING AS-PUMP  
  9S-4180 [1] PLUG-O-RING  
  4J-7533 [1] SEAL-O-RING  
13. 9N-5821 [2] DEFLECTOR-PULSE  
14. 4N-1826 [2] DOWEL  
15. 2D-6392 [2] SEAL-O-RING  
16. 7W-6335 [1] BEARING  
17. 8N-0628 [1] BEARING  
18. 4N-2333 [1] PIN-SPRING  
19. 8N-0984 [8] PIN-SPRING  
20. 4N-5481 [1] STUD  
21. 1P-4001 [1] FITTING  
22. 4N-0556 [1] GASKET-GOVERNOR HOUSING  
23. 4N-0532 [1] GASKET-COVER  
24. 4N-0531 [1] COVER-IDLE SCREW  
25. 6L-1756 [2] BOLT  
26. 4N-0938 [1] SHAFT-LEVER  
27. 4N-0940 [1] LEVER-SHUT-OFF  
28. 4N-0937 [1] SHAFT-LEVER  
 

#SEBP14650701
 

7C-8930: PUMP GP-GOV & FUEL INJ

7C8930 GOVERNOR & FUEL INJECTION PUMP GP-PART 4 OF 5
TYPE 1
PART OF 7C8969 & 7C8971 GOVERNOR & FUEL INJECTION PUMPS
c406613 SEBP1465
7C8930 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9F-6641 [4] BOLT  
2. 4N-2954 [1] SLEEVE-CAMSHAFT  
3. 4N-1132 [1] BODY AS-TRANSFER PUMP  
4. 8S-6814 [1] PIN  
5. 4N-1584 [1] SEAL-LIP TYPE  
6. 4N-0636 [1] SEAL-LIP TYPE  
7. 8H-9804 [1] SHAFT-PUMP IDLER  
8. 4N-0429 [1] GEAR-PUMP (15 TEETH)  
9. 4N-0406 [1] GEAR-PUMP (10 TEETH)  
10. 5M-6509 [1] SEAL-O-RING  
11. 4N-1767 [1] VALVE-BYPASS  
12. 4N-0605 [1] SPRING  
 

#SEBP14650702
 

7C-8930: PUMP GP-GOV & FUEL INJ

7C8930 GOVERNOR & FUEL INJECTION PUMP GP-PART 5 OF 5
TYPE 1
PART OF 7C8969 & 7C8971 GOVERNOR & FUEL INJECTION PUMPS
c406614 SEBP1465
7C8930 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-4276 [1] SEAT-SPRING  
2. 4N-6408 [1] PISTON AS  
3. 4N-6406 [1] RING-SPACER  
4. 4N-6404 [1] RING-RETAINING  
5. 4N-6407 [1] SPOOL-DASHPOT  
6. 6N-2517 [1] SPRING-DASHPOT  
7. 2W-8623 [1] SEAT-SPRING  
8. 4N-0434 [1] RISER-GOVERNOR  
9. 4N-2927 [2] RACE-BEARING THRUST  
  7M-7219 [1] BEARING-THRUST  
10. 4N-2953 [1] RING-LOCK  
11. 4N-3779 [1] KEY-CAMSHAFT  
12. 7W-6831 [1] CAMSHAFT-FUEL PUMP  
13. 8N-2663 [1] CARRIER-WEIGHT  
14. 8N-2662 [3] BOLT-SOCKET HEAD  
15. 4N-1723 [1] SHIELD-CARRIER  
16. 4N-0425 [3] WEIGHT-GOVERNOR  
17. 4N-0511 [3] DOWEL  
18. 4N-5482 [1] SHAFT-WEIGHT CARRIAGE  
19. 4N-9019 [1] DOWEL  
20. 9N-5822 [1] WASHER-THRUST  
 

#SEBP14650703
 

7C-8930: PUMP GP-GOV & FUEL INJ

7C8930 GOVERNOR & FUEL INJECTION PUMP GP-PART 1 OF 5
TYPE 2
PART OF 7C8969 & 7C8971 GOVERNOR & FUEL INJECTION PUMPS
c503023 SEBP1465
7C8930 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-3010 [8] PUMP AS-FUEL INJECTION  
    (EACH INCLUDES)
2. 9N-5862 [1] SPRING-LIFTER  
3. 4N-2728 [1] WASHER-RETAINER  
4. 7W-8039 [8] BONNET-VALVE  
  8N-1415 [8] SPRING-CHECK  
  1W-6987 [8] VALVE AS-CHECK  
  7W-8038 [8] INSERT  
5. 4N-0224 [8] RING-RETAINER  
6. 7W-8120 [8] BUSHING  
7. 9N-5827 [8] ROLLER-FUEL PUMP LIFT  
8. 9N-5817 [8] LIFTER-PLUNGER  
9. 6F-6672 [8] SEAL-O-RING  
10. 2M-5471 [2] BOLT  
11. 6N-1716 [1] VALVE AS  
12. 3J-7354 [1] SEAL-O-RING  
13. 9Y-0546 C [1] FLANGE AS  
14. 7E-5346 [1] VALVE AS  
15. 4N-0975 [1] GASKET-CHECK VALVE  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14650704
 

7C-8930: PUMP GP-GOV & FUEL INJ

7C8930 GOVERNOR & FUEL INJECTION PUMP GP-PART 2 OF 5
TYPE 2
PART OF 7C8969 & 7C8971 GOVERNOR & FUEL INJECTION PUMPS
c639398 SEBP1465
7C8930 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-2773 [1] SHAFT AS-CONTROL  
2. 5S-0003 [1] NUT-FULL  
3. 4N-2708 [1] SETSCREW  
4. 4N-0528 [1] SHAFT-LEVER  
5. 4N-9828 [1] SHAFT AS-CONTROL  
6. 4N-3922 [1] LEVER AS-CONNECTION  
7. 2N-2658 [10] BOLT-SOCKET HEAD  
8. 9N-5820 [8] LEVER-CONTROL  
9. 126-4144 [1] LEVER-SHAFT  
10. 124-5941 [1] SHAFT-CONTROL  
11. 7C-6201 [1] LEVER-SEAT  
12. 7C-6202 [1] LEVER  
13. 6F-0612 [1] NUT-JAM  
  6L-3921 [1] WASHER-SEAL  
14. 6N-4176 [1] SETSCREW  
15. 4N-0445 [1] LEVER-LOAD STOP  
  2M-7819 [1] RING-RETAINING  
16. 4N-0523 [1] DOWEL-STOP SUPPORT  
17. 2D-6392 [2] SEAL-O-RING  
18. 4N-3329 [2] WASHER  
19. 6N-7523 [1] WASHER  
20. 8F-8178 [1] BOLT  
21. 1D-4533 [3] BOLT  
22. 2A-4781 [3] BOLT  
   
   
23. 8N-3946 [1] HOUSING AS-GOVERNOR  
24. 4N-2333 [1] PIN-SPRING  
25. 8S-6814 [2] PIN  
26. 9Y-4966 C [1] VALVE AS-RELIEF  
  2D-6392 [1] SEAL-O-RING  
27. 9S-4182 [1] PLUG  
28. 3J-7354 [1] SEAL-O-RING  
29. 8N-3945 [1] BUSHING-TERMINAL  
30. 2W-4037 [1] SEAL-LIP  
31. 7X-2395 C [1] BOLT-LOCKING  
32. 3H-0442 [1] SEAL-O-RING  
33. 128-7347 [1] LEVER AS-RISER  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14650705
 

7C-8930: PUMP GP-GOV & FUEL INJ

7C8930 GOVERNOR & FUEL INJECTION PUMP GP-PART 3 OF 5
TYPE 2
PART OF 7C8969 & 7C8971 GOVERNOR & FUEL INJECTION PUMPS
c639397 SEBP1465
7C8930 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1615 [7] BOLT  
2. 3J-7354 [1] SEAL-O-RING  
3. 9S-4182 [1] PLUG  
4. 8H-3127 [2] BOLT  
5. 9S-9332 [1] FITTING-ELBOW  
6. 124-5939 [1] COVER-FUEL PUMP HOUSING  
7. 6D-3031 [4] SCREW-SOCKET HEAD  
8. 4N-0941 [1] LEVER-LIMITER  
9. 4N-0505 [1] GASKET-HOUSING  
10. 128-2974 [1] HOUSING AS (SHUT-OFF)  
  4N-3713 [1] SEAL-LIP  
11. 127-7139 [1] GASKET-TOP COVER  
12. 132-2117 [1] HOUSING AS-PUMP  
  9S-4180 [1] PLUG-O-RING  
  4J-7533 [1] SEAL-O-RING  
13. 9N-5821 [2] DEFLECTOR-PULSE  
14. 4N-1826 [2] DOWEL  
15. 2D-6392 [2] SEAL-O-RING  
16. 8N-0984 [8] PIN-SPRING  
17. 4N-5481 [1] STUD  
18. 3H-0703 [1] DOWEL  
19. 4N-0940 [1] LEVER-SHUTOFF  
20. 124-5942 [1] SHAFT-SOLENOID  
21. 1P-4001 [1] FITTING  
22. 4N-0556 [1] GASKET-GOVERNOR HOUSING  
23. 4N-0532 [1] GASKET-COVER  
24. 4N-0531 [1] COVER-IDLE SCREW  
25. 6L-1756 [2] BOLT  
26. 4N-0938 [1] SHAFT-LEVER  
 

#SEBP14650706
 

7C-8930: PUMP GP-GOV & FUEL INJ

7C8930 GOVERNOR & FUEL INJECTION PUMP GP-PART 4 OF 5
TYPE 2
PART OF 7C8969 & 7C8971 GOVERNOR & FUEL INJECTION PUMPS
c474073 SEBP1465
7C8930 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9F-6641 [4] BOLT  
2. 4N-2954 [1] SLEEVE-CAMSHAFT  
3. 4N-1132 [1] BODY AS-TRANSFER PUMP  
4. 8S-6814 [1] PIN  
5. 4N-1584 [1] SEAL-LIP TYPE  
6. 4N-0636 [1] SEAL-LIP TYPE  
7. 8H-9804 [1] SHAFT-PUMP IDLER  
8. 4N-0429 [1] GEAR-PUMP (15 TEETH)  
9. 4N-0406 [1] GEAR-PUMP (10 TEETH)  
10. 5M-6509 [1] SEAL-O-RING  
11. 4N-1767 [1] VALVE-BYPASS  
12. 4N-0605 [1] SPRING  
 

#SEBP14650707
 

7C-8930: PUMP GP-GOV & FUEL INJ

7C8930 GOVERNOR & FUEL INJECTION PUMP GP-PART 5 OF 5
TYPE 2
PART OF 7C8969 & 7C8971 GOVERNOR & FUEL INJECTION PUMPS
c474074 SEBP1465
7C8930 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-4276 [1] SEAT-SPRING  
2. 4N-6408 [1] PISTON AS  
3. 4N-6406 [1] RING-SPACER  
4. 4N-6404 [1] RING-RETAINING  
5. 4N-6407 [1] SPOOL-DASHPOT  
6. 6N-2517 [1] SPRING-DASHPOT  
7. 2W-8623 [1] SEAT-SPRING  
8. 4N-0434 [1] RISER-GOVERNOR  
9. 4N-2927 [2] RACE-BEARING THRUST  
  7M-7219 [1] BEARING-THRUST  
10. 4N-2953 [1] RING-LOCK  
11. 4N-3779 [1] KEY-CAMSHAFT  
12. 7W-6831 [1] CAMSHAFT-FUEL PUMP  
13. 8N-2663 [1] CARRIER-WEIGHT  
14. 8N-2662 [3] BOLT-SOCKET HEAD  
15. 4N-1723 [1] SHIELD-CARRIER  
16. 4N-0425 [3] WEIGHT-GOVERNOR  
17. 4N-0511 [3] DOWEL  
18. 4N-5482 [1] SHAFT-WEIGHT CARRIAGE  
19. 4N-9019 [1] DOWEL  
20. 9N-5822 [1] WASHER-THRUST  
 

#SEBP14650708
 

1W-6741: PUMP GP-GOV & FUEL INJ

1W6741 PUMP GP-GOVERNOR & FUEL INJECTION
S/N 2Z2061-13759
1W6740-PAGE 276
PART OF 1W6742 PUMP-GOVERNOR & FUEL INJECTION
c640044 SEBP1465
1W6741 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-5661 [1] SPRING-GOVERNOR (OUTER)  
2. 4N-5663 [1] SPRING (INNER)  
3. 4N-0527 [1] SPRING  
4. 7L-8070 [2] BOLT-HEAD  
5. 117-0287 [1] GASKET-TORQUE SPRING COVER  
6. 1W-6740 Y [1] PUMP GP-GOV & FUEL INJ  
7. 134-3857 [1] COVER AS-TORQUE SPRING  
8. 6N-0412 [1] SCREW AS-MACHINE  
  4B-2042 [1] NUT  
  3B-4501 [1] LOCKWASHER (#8)  
  1P-7326 [1] WASHER (1.52MM THK)  
  8F-1326 [1] WASHER (0.8MM THK)  
9. 3K-8460 [1] PLUG  
  1J-9671 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP14650709
 

4W-1477: PUMP GP-GOV & FUEL INJ

4W1477 GOVERNOR & FUEL INJECTION PUMP GROUP
PART OF 4W1476 GOVERNOR & FUEL INJECTION PUMP GROUP SHOWN ON PAGE 264
9N5778 PUMP PARTS ARE SHOWN ON PAGES 269 THRU 273
c637343 SEBP1465
4W1477 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-2129 [1] SPRING-GOVERNOR (OUTER)  
2. 4N-5663 [1] SPRING (INNER)  
3. 4N-0527 [1] SPRING  
4. 7L-8070 [2] BOLT-HEAD  
5. 117-0287 [1] GASKET-TORQUE SPRING COVER  
6. 9N-5778 Y [1] PUMP GP-GOV & FUEL INJ  
7. 134-3857 [1] COVER AS-TORQUE SPRING  
8. 6N-0412 [1] SCREW AS-MACHINE  
  4B-2042 [1] NUT  
  3B-4501 [1] LOCKWASHER  
  1P-7326 [1] WASHER (152MM(.06IN)THK)  
  8F-1326 [1] WASHER (.813MM(.032IN)THK)  
9. 3K-8460 [1] PLUG (1/2-20 THD)  
  1J-9671 [1] SEAL-O-RING (10.52MM ID)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
Check All Settings When Fuel Injection Pump Group Is Installed
1981/04/09
Bent Lever For Fuel Shut-off Solenoid Can Cause Low Engine Performance
1982/02/17
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/09/01
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing
1982/10/27
New Seal Used On Governor Control Shaft
1982/12/08
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/23
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1983/12/21
Governor Flyweight Shield No Longer Used In New Scroll Fuel Systems
1985/01/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Improved Governor Performance
1987/04/01
Check Valve Added To Keep Air From Entering Fuel System
1988/10/01
Governor Springs For Sleeve Metering Fuel Systems
1990/05/01
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life
1991/07/01
New Spring Used In Governor Control Groups
1992/04/01
New Hold-Down Bolts For The Sleeve Metering Fuel System (SMFS) Governor Housing {1251}
1996/09/01
Improved Fuel Pump Plunger Helps Prevent Plunger And Sleeve Scuffing In Service 8.5 mm Fuel Injection Pump Assembly For Sleeve Metering Fuel System (SMFS) Governor And Fuel Injection Pump Groups{1251,1286}
1996/11/01
Engine News
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing
1979/01/24
Service Tools For Low Emission Truck Engines With EGR
1977/06/29
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Service Letter-NACD
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Fuel Injection Pump
3208 DIESEL TRUCK ENGINE
Governor
3208 DIESEL TRUCK ENGINE
Fuel Transfer Pump
3208 DIESEL TRUCK ENGINE
Automatic Timing Advance Unit (3.5° and 5° unit)
3208 DIESEL TRUCK ENGINE
Drive Gear For The Injection Pump
3208 DIESEL TRUCK ENGINE
Service Letter-China
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Injection Pump Housing And Governor
3208 DIESEL TRUCK ENGINE
Fuel Injection Pump Housing
3208 DIESEL TRUCK ENGINE
Check Valve And Bypass Valve
3208 DIESEL TRUCK ENGINE
Fuel Injection Pumps
3208 DIESEL TRUCK ENGINE
Fuel Transfer Pump
3208 DIESEL TRUCK ENGINE
Automatic Timing Advance
3208 DIESEL TRUCK ENGINE
Automatic Timing Advance
3208 DIESEL TRUCK ENGINE
Service Magazine
Use The FT1525 Alignment Pin And FT1526 Fixture When Reconditioning Earlier 3208 Sleeve Metering Fuel Systems{0626,1264,1286}
1980/05/12
New Check Valve Used In Fuel Injection Pump Assembly{1251}
1980/05/26
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
Fuel Pressure Relief Valve Is Shown Inverted (Wrong End Up) In Parts Book Illustrations {1253,1286}
1981/03/23
Check All Settings When Fuel Injection Pump Group Is Installed{1286,1264,1251,1253}
1981/03/30
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Thrust Washer Used In Pump Housing For Sleeve Metering Fuel System{1253,1286}
1981/08/31
Bent Lever For Fuel Shut-Off Solenoid Can Cause Low Engine Performance{1286,1259}
1982/02/01
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing{0626,0665,1264,1286}
1982/10/18
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Improved Governor Performance{1264,1250}
1987/04/06
Four More Remanufactured Fuel Pump And Governor Groups Available {1286}
1987/09/14
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Check Valve Added To Keep Air From Entering Fuel System {1264}
1988/10/03
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Governor Springs For Sleeve Metering Fuel Systems {1264}
1990/05/21
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life{1287}
1991/07/08
New Spring Used In Governor Control Groups{1265}
1992/04/20
Use Calibration Tools To Set, Test, And Adjust Heavy Sleeve Metering Fuel System {1250,1251}
1998/03/30

Caterpillar Parts SIS Catalog 3208 :

PUMP GP-GOV & FUEL INJ
7C-8930 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8930 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8929 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8929 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8929 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8929 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8929 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8929 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8930 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8930 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8930 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8930 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8930 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8930 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-8930 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
1W-6741 PUMP GP-GOV & FUEL INJ

Truck sale:

 
11,500 
Caterpillar D3208EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
CATERPILLAR 3208 1993
 
CATERPILLAR 3208 1993
- STATIONARY - DIESEL
WAGNER EQUIPMENT CO
United States
CATERPILLAR 3208 2004
 
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
1998 CAT 3208
USD $19,000 
1998 CAT 3208

Galactic Liquidation LLC
1990 CAT 3208
 
1990 CAT 3208

Ken Porter Auctions
Carson, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.