BASIC ENGINE
CRANKSHAFT GPPISTON & ROD GP
CAMSHAFT GP
CYLINDER HEAD GP
BASIC ENGINE
CRANKSHAFT GP#SEBP14680010
1W-5010: CRANKSHAFT GP
Parts for your 769C TRUCK:
CATERPILLAR SIS#SEBP14680011
7W-6648: CRANKSHAFT GP
#SEBP14680012
1W-5010: CRANKSHAFT GP
Parts for your 769C TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1W-5009 RY | [1] | CRANKSHAFT AS | |
| 2. | 4W-5492 | [5] | BEARING-MAIN (STANDARD) | |
| 4W-5698 AB | [5] | BEARING-MAIN 0.63-MM US | ||
| 4W-5699 AB | [5] | BEARING-MAIN 1.27-MM US | ||
| 4W-5700 AB | [5] | BEARING-MAIN 0.63-MM OS | ||
| 4W-5701 AB | [5] | BEARING-MAIN 0.63-MM OS, 0.63-MM US | ||
| 3. | 7E-9262 | [2] | PLATE-THRUST | |
| 4. | 2W-1733 | [1] | SEAL GP-CRANKSHAFT | |
| 5. | 2W-1734 | [1] | SEAL GP-CRANKSHAFT | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| R | REMFG. PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP14680013
CRANKSHAFT BEARING REPLACEMENTS
CRANKSHAFT BEARING REPLACEMENTS
Parts for your 769C TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| CYLINDER BLOCK NOT REBORED | ||||
| ---------------------------------------- | ||||
| CRANKSHAFT GROUND FOR UNDERSIZE | ||||
| MAIN BEARING I.D. OF: | ||||
| 4W-5698 | [5] | 0.63MM | ||
| 4W-5699 | [5] | 1.27MM | ||
| ---------------------------------------- | ||||
| ---------------------------------------- | ||||
| CYLINDER BLOCK REBORED(0.63MM) | ||||
| (FOR BEARING OVERSIZE O.D.) | ||||
| ---------------------------------------- | ||||
| CRANKSHAFT GROUND FOR UNDERSIZE | ||||
| MAIN BEARING I.D. OF: | ||||
| 4W-5700 | [5] | 0 (STANDARD) | ||
| 4W-5701 | [5] | 0.63MM | ||
#SEBP14680014
1W-5009: CRANKSHAFT AS
1W5009 CRANKSHAFT AS*R
PART OF 1W5010 & 7W6648 CRANKSHAFTS
PART OF 1W5010 & 7W6648 CRANKSHAFTS
Parts for your 769C TRUCK:
CATERPILLAR SIS#SEBP14680015
2W-9053: PISTON GP
2W9053 PISTON GP-8 REQUIRED
PART OF 2W9054 PISTON & ROD
PART OF 2W9054 PISTON & ROD
Parts for your 769C TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2W-0865 R | [1] | BODY AS-PISTON | |
| 2. | 1W-9460 | [1] | RING (TOP) | |
| 3. | 2P-2817 | [1] | RING-INTERMEDIATE | |
| 4. | 7N-7078 | [1] | RING-OIL | |
| 1W-8922 FA | [1] | RING GP-PISTON (STANDARD) | ||
| (CONSISTS OF A | ||||
| COMPLETE SET OF RINGS | ||||
| FOR ONE PISTON) | ||||
| A | NOT PART OF THIS GROUP | |||
| F | NOT SHOWN | |||
| R | REMFG PART MAY BE AVAILABLE | |||
#SEBP14680016
2W-9054: PISTON & ROD GP
2W9054 PISTON & ROD GP-8 REQUIRED
2W9053-PAGE 10
2W9053-PAGE 10
Parts for your 769C TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8N-1608 | [1] | PIN-PISTON | |
| 2. | 8N-7295 | [2] | RETAINER-PIN | |
| 3. | 8N-1728 R | [1] | ROD AS-CONNECTING | |
| 8N-2018 | [1] | BEARING-SLEEVE | ||
| 4. | 6N-8942 | [2] | BOLT-CONNECTING ROD | |
| 8L-3441 | [2] | NUT | ||
| 5. | 9Y-9497 C | [1] | BEARING-CONNECTING ROD (STANDARD) | |
| 4W-5702 CA | [1] | BEARING-CONNECTING ROD | ||
| .025IN(.63MM)UNDERSIZE | ||||
| 4W-5703 CA | [1] | BEARING-CONNECTING ROD | ||
| .050IN(1.27MM)UNDERSIZE | ||||
| 6. | 2W-9053 Y | [1] | PISTON GP | |
| A | NOT PART OF THIS GROUP | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| R | REMFG PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP14680017
4N-0963: CAMSHAFT GP
4N0963 CAMSHAFT GP
Parts for your 769C TRUCK:
CATERPILLAR SIS#SEBP14680018
4W-7005: CYLINDER HEAD GP
Parts for your 769C TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7W-1902 C | [8] | ADAPTER-FUEL NOZZLE | |
| 2. | 2S-2251 | [8] | SEAL-O-RING | |
| 3. | 4N-7253 | [8] | GASKET-CHAMBER | |
| 4. | 5M-6214 B | [2] | PLUG-PIPE | |
| 5. | 1W-9802 Y | [2] | CYLINDER HEAD GP | |
| 6. | 0L-1352 | [11] | BOLT | |
| 7. | 3J-5390 | [2] | PLUG | |
| 8. | 3J-5389 | [2] | PLUG | |
| 9. | 1B-5174 | [2] | PLUG-PIPE | |
| 10. | 4S-6137 | [16] | STUD-TAPERLOCK | |
| 11. | 2W-7984 | [2] | GASKET-CYLINDER HEAD | |
| 12. | 2H-3750 | [28] | BOLT | |
| 5H-1504 | [28] | WASHER-HARD | ||
| 13. | 4W-1055 | [32] | SEAL-WATER | |
| 14. | 5P-0063 B | [4] | PLUG-CUP | |
| 15. | 4N-0932 B | [2] | PLUG-CUP | |
| 16. | 1A-5183 | [2] | BOLT | |
| 17. | 5M-2894 | [5] | WASHER | |
| 18. | 5B-2638 | [2] | BOLT | |
| 19. | 6N-6731 | [1] | SUPPORT-GEAR HSG (L.H.) | |
| 20. | 6N-6732 | [1] | SUPPORT-GEAR HSG (R.H.) | |
| 21. | 2B-0858 | [2] | PLUG-PIPE | |
| 22. | 8S-9191 | [3] | BOLT | |
| 23. | 0S-1591 | [2] | BOLT | |
| 24. | 1W-5207 | [1] | BRACKET-FUEL PUMP | |
| 25. | 9N-2583 | [1] | BRACKET-FUEL PUMP | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP14680019
4W-7005: CYLINDER HEAD GP
Parts for your 769C TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9N-2583 | [1] | BRACKET-FUEL PUMP | |
| 2. | 0S-1591 | [1] | BOLT | |
| 3. | 5M-2894 | [2] | WASHER | |
| 4. | 8S-9191 | [1] | BOLT | |
| 5. | 1A-5183 | [1] | BOLT | |
| 6. | 5B-2638 | [1] | BOLT | |
| 7. | 6N-6731 | [1] | SUPPORT-GEAR HSG (LH) | |
| 8. | 2W-7984 | [2] | GASKET-CYLINDER HEAD | |
| 9. | 2H-3750 | [28] | BOLT | |
| 10. | 5H-1504 | [28] | WASHER-HARD | |
| 11. | 7W-2224 Y | [2] | CYLINDER HEAD GP | |
| 12. | 0L-1352 | [11] | BOLT | |
| Y | SEPARATE ILLUSTRATION | |||
Information:
BASIC ENGINE
CRANKSHAFT GP
Truck Engine News
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2003/05/01
2003/05/01
Engine News
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2003/05/01
2003/05/01
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Service Letter-NACD
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Specifications
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Service Letter-China
Service Letter-Asia
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Service Letter-APD
Testing and Adjusting
Disassembly and Assembly
Service Magazine
Recommendations For Inspection And Replacement Of Rubber and Viscous Crankshaft Dampers{1205}
1995/08/21
1995/08/21
New Front Crankshaft Seals and New Rear Crankshaft Seals are Now in Production {1160, 1161}
2003/05/12
2003/05/12
Caterpillar Parts SIS Catalog 769C :
Truck sale:
68.091
Caterpillar 769C, Dumper - Knickgelenk, Bau-Und Bergbauausrüstung
- Articulated Dump Trucks (ADTs)
FINNING CANADA
Canada
- Articulated Dump Trucks (ADTs)
FINNING CANADA
Canada




