AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

776 TRACTOR 14H00206-UP (MACHINE) POWERED BY D348 ENGINE BASIC ENGINE Caterpillar SIS



TRACTOR 776 TRACTOR 14H
 776 TRACTOR 14H00206-UP (MACHINE) POWERED BY D348 ENGINE SEBP1469 776 14H   (1975)

Parts group 776:

  For full view, you need register
BASIC ENGINE
AIR COMPRESSOR GP
AIR COMPRESSOR GP
4N-4433 AIR COMPRESSOR GP
4N4433 AIR COMPRESSOR GROUP
1P5011-PAGE 57
AIR COMPRESSOR GP
1P-5011 AIR COMPRESSOR GP
1P5011 AIR COMPRESSOR GROUP
PART OF 4N4433 AIR COMPRESSOR
BELT TIGHTENER GP
BELT TIGHTENER GP
4N-5034 BELT TIGHTENER GP
4N5034 BELT TIGHTENER GROUP
CAMSHAFT GP
CAMSHAFT GP
4N-7459 CAMSHAFT GP
4N7459 CAMSHAFT GROUP
HOUSING GP-CAMSHAFT
4N-7461 HOUSING GP-CAMSHAFT
4N7461 CAMSHAFT HOUSING GROUP
CRANKSHAFT GP
CRANKSHAFT GP
4N-6818 CRANKSHAFT GP
4N6818 CRANKSHAFT GROUP
SEAL GP-CRANKSHAFT
4N-7077 SEAL GP-CRANKSHAFT
4N7077 CRANKSHAFT SEAL GROUP
CRANKSHAFT BEARING REPLACEMENTS
CRANKSHAFT BEARING REPLACEMENTS
CYLINDER BLOCK GP
CYLINDER BLOCK GP
2W-5259 CYLINDER BLOCK GP
2W5259 CYLINDER BLOCK GROUP
4N8119-PAGE 7
CYLINDER BLOCK AS
4N-8119 CYLINDER BLOCK AS
4N8119 CYLINDER BLOCK ASSEMBLY
PART OF 2W5259 CYLINDER BLOCK
FOR FIELD REPLACEMENT ORDER 6N7329-PAGE 8 AND 1P1732 KIT
CYLINDER BLOCK AS
6N-7329 CYLINDER BLOCK AS
6N7329 CYLINDER BLOCK ASSEMBLY
FIELD REPLACEMENT FOR 4N8119-PAGE 7
CYLINDER HEAD GP
CYLINDER HEAD GP
7N-9551 CYLINDER HEAD GP
7N9551 CYLINDER HEAD GROUP*R
DAMPER GP
DAMPER & PULLEY GP
4N-4416 DAMPER & PULLEY GP
4N4416 PULLEY AND DAMPER GROUP
DRIVE GP-FAN
DRIVE GP-FAN
6N-1904 DRIVE GP-FAN
6N1904 FAN DRIVE GROUP
7N-8533 DRIVE GP-FAN
7N8533 FAN DRIVE GROUP-TEMPERATURE CONTROLLED-PART 1 OF 2
FIELD REPLACEMENT. FOR USE WITHOUT AIR CONDITIONING
PROVIDES HIGHER JACKET WATER TEMPERATURE DURING COLD WEATHER OPERATION
7N-8533 DRIVE GP-FAN
7N8533 FAN DRIVE GROUP-TEMPERATURE CONTROLLED-PART 2 OF 2
FIELD REPLACEMENT. FOR USE WITHOUT AIR CONDITIONING
PROVIDES HIGH JACKET WATER TEMPERATURE DURING COLD WEATHER OPERATION
FLYWHEEL GP
FLYWHEEL GP
4N-7052 FLYWHEEL GP
4N7052 FLYWHEEL GROUP
GEAR GP
GEAR GP-FRONT
4N-4902 GEAR GP-FRONT
4N4902 FRONT GEAR GROUP
HOUSING GP-FRONT
4N-7436 HOUSING GP-FRONT
4N7436 FRONT HOUSING GROUP
GEAR GP-REAR
4N-4903 GEAR GP-REAR
4N4903 REAR GEAR GROUP-PART 1 OF 2
GEAR GP-REAR
4N-4903 GEAR GP-REAR
4N4903 REAR GEAR GROUP-PART 2 OF 2
HOUSING GP-FLYWHEEL
HOUSING GP-FLYWHEEL
4N-7080 HOUSING GP-FLYWHEEL
4N7080 FLYWHEEL HOUSING GROUP-END VIEW-PART 1 OF 2
HOUSING GP-FLYWHEEL
4N-7080 HOUSING GP-FLYWHEEL
4N7080 FLYWHEEL HOUSING GROUP-SIDE VIEW-PART 2 OF 2
HOUSING GP-FRONT
GEAR GP-FRONT
4N-4902 GEAR GP-FRONT
4N4902 FRONT GEAR GROUP
HOUSING GP-FRONT
4N-7436 HOUSING GP-FRONT
4N7436 FRONT HOUSING GROUP
MOUNTING GP-ENGINE
SUPPORT GP-ENGINE
9D-2870 SUPPORT GP-ENGINE
9D2870 ENGINE SUPPORT GROUP
TRUNNION GP-ENGINE
4N-7081 TRUNNION GP-ENGINE
4N7081 ENGINE TRUNNION GROUP
PAN GP-OIL
PAN GP-OIL
4N-6135 PAN GP-OIL
4N6135 OIL PAN GROUP
EXTENSION GP-DRAIN
6N-1173 EXTENSION GP-DRAIN
6N1173 OIL DRAIN EXTENSION GROUP
PISTON & ROD GP
PISTON & ROD GP
4N-8952 PISTON & ROD GP
4N8952 CONNECTING ROD AND PISTON GROUP-6 REQUIRED
VALVE MECHANISM GP
VALVE MECHANISM GP
4N-7460 VALVE MECHANISM GP
4N7460 VALVE MECHANISM GROUP
COVER GP-VALVE MECHANISM
4N-8066 COVER GP-VALVE MECHANISM
4N8066 VALVE MECHANISM COVER GROUP

Information:

(For parts list, see above)

General Service Information
Tu-Flo 300 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 400, 500, 1000 Compressors
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 501 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 600 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 700 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Truck Engine News
A New Special Instruction , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/01
Special Instruction
Air Compressor Installation Instructions{1803}
Air Compressor Installation Instructions{1803}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Specifications
Air Compressor Drive Gear
5.4" BORE, 60 V12 VEHICULAR ENGINE
Air Compressor And Hydraulic Pump Drive Gear
5.4" BORE, 60 V12 VEHICULAR ENGINE
Air Compressor Governor<BR> (4N9680)
776 TRACTOR & 777 TRUCK AIR SYSTEM AND BRAKES
Air Compressor Governor
776 TRACTOR & 777 TRUCK AIR SYSTEM AND BRAKES
Disassembly and Assembly
Air Compressor
D348 VEHICULAR ENGINE FOR 776 TRACTOR & 777 TRUCK
Air Compressor Override Valve
777 TRUCK VEHICLE SYSTEMS
Service Magazine
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
A New Special Instruction, REHS1428 , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/23
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/15
Specifications
V-Belt Tension Chart
5.4" BORE, 60 V12 VEHICULAR ENGINE
Disassembly and Assembly
Belt Tightener
D348 VEHICULAR ENGINE FOR 776 TRACTOR & 777 TRUCK
Service Magazine
New Spring Used In Belt Tightener And/Or Fan Drive Groups{1358,1359}
1978/01/30
Fan Belt Tightener Shaft Replacement Procedure Provides Grease Path to Bearings{1358}
1997/03/17
A New Rework Procedure for the Fan Drive Belt Tightener Has Been Released {1358}
2006/01/02
Information that Improves the Service Life of the Remanufactured Air Conditioning Compressor {1357, 1358, 1397, 1802, 1805, 1809, 7320, 7342, 7343}
2008/03/10
Specifications
Camshafts
5.4" BORE, 60 V12 VEHICULAR ENGINE
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Camshaft Housings
D348 VEHICULAR ENGINE FOR 776 TRACTOR & 777 TRUCK
Service Magazine
Reusability Of Camshaft Rollers And Roller Followers{1209,1210}
1982/09/06
Higher Temperature Material Used In Camshaft Base Gasket{1113,1120}
1985/10/28
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
New Camshaft Housing Gasket Has Increased Resistance To High Temperature{1113}
1979/10/15
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Specifications
Crankshaft
5.4" BORE, 60 V12 VEHICULAR ENGINE
Bearing Surface (Journal) For Connecting Rods
5.4" BORE, 60 V12 VEHICULAR ENGINE
Bearing Surface (Journal) For Main Bearings
5.4" BORE, 60 V12 VEHICULAR ENGINE
Main Bearings
5.4" BORE, 60 V12 VEHICULAR ENGINE
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Disassembly and Assembly
Crankshaft Front Seal
D348 VEHICULAR ENGINE FOR 776 TRACTOR & 777 TRUCK
Crankshaft Main Bearings
D348 VEHICULAR ENGINE FOR 776 TRACTOR & 777 TRUCK
Crankshaft Rear Seal and Wear Sleeve
D348 VEHICULAR ENGINE FOR 776 TRACTOR & 777 TRUCK
Crankshaft
D348 VEHICULAR ENGINE FOR 776 TRACTOR & 777 TRUCK
Service Magazine
Main And Connecting Rod Bearings With Cavitation Erosion Can Be Used Again{1230,1203,1219}
1980/04/21
Service Tips For Removal And Installation Of Main And Connecting Rod Bearings In Chassis{0611,1203,1219,1230}
1980/07/14
FT1576 Puller Plate Used For Removal Of Crankshaft Gear; Drawings For FT1576 Puller Plate Can Be Used For Modification Of Existing Puller Plate{0621,1204,1202}
1981/01/19
Corrected &quot;5.4&quot; 60&deg;V Main Bearing Selection Guide&quot; Is Now Available{0374,1203,1202}
1981/02/02
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Oil Passage Plugs Are No Longer Installed In Crankshafts For Parts Service{1202}
1982/07/19
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
Tools To Install Crankshaft Seal And Wear Sleeve{1160,1161,0622}
1977/07/11
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
New Crankshafts Do Not Have Lightening Holes And Lubrication Passages Connected Together{1202,1219}
1977/11/21
Reference Chart For Main And Connecting Rod Bearings{1203,1219,1230}
1977/11/28
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Main And Connecting Rod Bearings Have A Thicker Layer Of Surface Material{1230,1203,1219}
1979/09/17
Check New 1W7578 And Remanufactured OR2530 Crankshafts For Burr On Thrust Face {1202,1203}
1990/05/21
Grinder Burns On Crankshaft Sidewalls{1202}
1990/06/18
New Crankshaft Seal Groups Used{1160,1161,1202}
1990/11/05
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Special Instruction
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Service Letter-NACD
Remove 1260739 Liner With Date Codes 190595 Through 280695 From Parts Stock
Remove 1260739 Liner With Date Codes 190595 Through 280695 From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Cylinder Block
5.4" BORE, 60 V12 VEHICULAR ENGINE
Cylinder Liner
5.4" BORE, 60 V12 VEHICULAR ENGINE
Cylinder Liner Projection
5.4" BORE, 60 V12 VEHICULAR ENGINE
Bearing Surface (Journal) For Main Bearings
5.4" BORE, 60 V12 VEHICULAR ENGINE
Main Bearings
5.4" BORE, 60 V12 VEHICULAR ENGINE
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Service Letter-China
Remove 1260739 Liner With Date Codes 190595 Through 280695 From Parts Stock
Remove 1260739 Liner With Date Codes 190595 Through 280695 From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Letter-APD
Remove 1260739 Liner With Date Codes 190595 Through 280695 From Parts Stock
Remove 1260739 Liner With Date Codes 190595 Through 280695 From Parts Stock
Disassembly and Assembly
Crankshaft Main Bearings
D348 VEHICULAR ENGINE FOR 776 TRACTOR & 777 TRUCK
Piston Cooling Tubes
D348 VEHICULAR ENGINE FOR 776 TRACTOR & 777 TRUCK
Spacer Plates
D348 VEHICULAR ENGINE FOR 776 TRACTOR & 777 TRUCK
Cylinder Liners
D348 VEHICULAR ENGINE FOR 776 TRACTOR & 777 TRUCK
Service Magazine
Main And Connecting Rod Bearings With Cavitation Erosion Can Be Used Again{1230,1203,1219}
1980/04/21
Service Tips For Removal And Installation Of Main And Connecting Rod Bearings In Chassis{0611,1203,1219,1230}
1980/07/14
Corrected &quot;5.4&quot; 60&deg;V Main Bearing Selection Guide&quot; Is Now Available{0374,1203,1202}
1981/02/02
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Temporary Use Of Secondary Oil Filter Can Prevent Damage To Rebuilt Engines{1307,1318,1157}
1982/07/19
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Reference Chart For Main And Connecting Rod Bearings{1203,1219,1230}
1977/11/28
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Head Assemblies, Head Gaskets, And Spacer Plate Gaskets Prevent Oil Leakage At The Spacer Plate{1101,1113}
1978/10/09
New Oil Jet Tube In Cylinder Block Gives More Clearance For Pistons And Connecting Rods{1201}
1979/03/26
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
New Main And Connecting Rod Bearings Have A Thicker Layer Of Surface Material{1230,1203,1219}
1979/09/17
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Engine Cylinder Liner Available{1216}
1996/01/15
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Service Letter-Australia
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Service Letter-CFEL
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Service Letter-CSARL
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Service Letter-Americas
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Service Letter-Truck/Ag/Marine
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Technical Information Bulletin
Failures of the 4W-5733 Valve Adapter and the 4W-5719 Adapter As on Certain 3408 and 3412 Engines{1100}
Failures of the 4W-5733 Valve Adapter and the 4W-5719 Adapter As on Certain 3408 and 3412 Engines{1100}
Specifications
Precombustion Chamber
5.4" BORE, 60 V12 VEHICULAR ENGINE
Valves
5.4" BORE, 60 V12 VEHICULAR ENGINE
Cylinder Head
5.4" BORE, 60 V12 VEHICULAR ENGINE
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Service Letter-China
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Service Letter-Asia
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
3S3018 Valve Springs Shipped Prior To June Of 1997 Need To Be Removed From Parts Stock
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
0R2099, 0R2181, And 0R2183 Upgrade To New Remanufactured Cylinder Heads; And 7N9532 New Product Cylinder Heads In Dealer Parts Stock Need To Be Inspected For Correct Flatness.
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Disassembly and Assembly
Precombustion Chambers
D348 VEHICULAR ENGINE FOR 776 TRACTOR & 777 TRUCK
Cylinder Heads
D348 VEHICULAR ENGINE FOR 776 TRACTOR & 777 TRUCK
Valves
D348 VEHICULAR ENGINE FOR 776 TRACTOR & 777 TRUCK
Valve Guides
D348 VEHICULAR ENGINE FOR 776 TRACTOR & 777 TRUCK
Valve Seat Inserts
D348 VEHICULAR ENGINE FOR 776 TRACTOR & 777 TRUCK
Water Directors
D348 VEHICULAR ENGINE FOR 776 TRACTOR & 777 TRUCK
Service Magazine
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
New Precombustion Chamber Seal Available{1106,1100}
1985/09/02
Torque Increase For Cylinder Head Bolts{1101}
1985/09/30
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Avoid Oil Contact With New Water Passage Seals Used In Cylinder Head Groups{1100}
1986/08/18
Silicone Water Seal Available{1101}
1986/08/18
Use Heli-Coils To Repair 5.4&quot; Bore Engine Rocker Arm Assemblies{1123,1105}
1986/12/22
New Water Temperature Regulator Has A Closer Fit At The Valve Seat To Keep Leakage At A Minimum{1355}
1977/01/17
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
New Head Assemblies, Head Gaskets, And Spacer Plate Gaskets Prevent Oil Leakage At The Spacer Plate{1101,1113}
1978/10/09
New Exhaust Valve Has Improved Three-Piece Construction{1105}
1979/04/09
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
How to Prevent Exhaust Valve Failures on D348 Engines{1105}
1989/10/23
Improved Manufacturing Process Extends Service Life Of New Exhaust Valves {1105}
1990/05/28
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
New Threaded Gland Cylinder Heads Have Stronger Seal Land{7562,4303,5102,5104,5105,5223,5229,5265,5452}
1996/11/11
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Improved Cylinder Head Assemblies Are Available through Cat Reman for Certain Machine Engines {1100}
2012/05/08
Specifications
Vibration Damper<BR> (5S3419 and 2S712)
5.4" BORE, 60 V12 VEHICULAR ENGINE
Vibration Damper<BR> (2N7221 and 4N4416)
5.4" BORE, 60 V12 VEHICULAR ENGINE
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Disassembly and Assembly
Vibration Damper And Hub
D348 VEHICULAR ENGINE FOR 776 TRACTOR & 777 TRUCK
Service Magazine
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
New Vibration Damper Has Stronger Mounting Flange To Prevent Possible Cracks{1205}
1978/06/12
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
Specifications
Air Compressor And Hydraulic Pump Drive Gear
5.4" BORE, 60 V12 VEHICULAR ENGINE
Fan Drive For 992
5.4" BORE, 60 V12 VEHICULAR ENGINE
Fan Drive For D348, 776, 777
5.4" BORE, 60 V12 VEHICULAR ENGINE
V-Belt Tension Chart
5.4" BORE, 60 V12 VEHICULAR ENGINE
Disassembly and Assembly
Fan Drive
D348 VEHICULAR ENGINE FOR 776 TRACTOR & 777 TRUCK
Service Magazine
New Spring Used In Belt Tightener And/Or Fan Drive Groups{1358,1359}
1978/01/30
Fan Belt Tightener Shaft Replacement Procedure Provides Grease Path to Bearings{1358}
1997/03/17
Filter Added To Drain Hole In Water Pumps{1361}
1985/11/18
Two New Coolant Flow Switches Used On Machines Equipped With Electronic Monitoring System (EMS){1361,7422,7470}
1990/09/24
Special Instruction
Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Analyzing A Major Engine Failure{1000}
1982/07/19
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Integral Connector Now Used On The Air Conditioning Condenser Fan Motor Relay Assembly{1408,7320}
1996/04/29
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Specifications
Flywheel
5.4" BORE, 60 V12 VEHICULAR ENGINE
Flywheel Housing
5.4" BORE, 60 V12 VEHICULAR ENGINE
Flywheel Runout
5.4" BORE, 60 V12 VEHICULAR ENGINE
Flywheel Housing Runout
5.4" BORE, 60 V12 VEHICULAR ENGINE
Flywheel Housing Bore
5.4" BORE, 60 V12 VEHICULAR ENGINE
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Disassembly and Assembly
Flywheel
D348 VEHICULAR ENGINE FOR 776 TRACTOR & 777 TRUCK
Flywheel Housing
D348 VEHICULAR ENGINE FOR 776 TRACTOR & 777 TRUCK
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Engine News
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/14
Specifications
Timing Gears For 992
5.4" BORE, 60 V12 VEHICULAR ENGINE
Timing Gears For D348, 776, 777
5.4" BORE, 60 V12 VEHICULAR ENGINE
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Disassembly and Assembly
Crankshaft Front Seal
D348 VEHICULAR ENGINE FOR 776 TRACTOR & 777 TRUCK
Front Timing Gear Housing
D348 VEHICULAR ENGINE FOR 776 TRACTOR & 777 TRUCK
Front Timing Gears And Plate
D348 VEHICULAR ENGINE FOR 776 TRACTOR & 777 TRUCK
Rear Timing Gears And Plate
D348 VEHICULAR ENGINE FOR 776 TRACTOR & 777 TRUCK
Service Magazine
Washer, Seal Added To Improve Oil Filter Assembly{1306,1318}
1981/07/13
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/13
Specifications
Flywheel Housing
5.4" BORE, 60 V12 VEHICULAR ENGINE
Flywheel Housing Runout
5.4" BORE, 60 V12 VEHICULAR ENGINE
Flywheel Housing Bore
5.4" BORE, 60 V12 VEHICULAR ENGINE
Disassembly and Assembly
Flywheel Housing
D348 VEHICULAR ENGINE FOR 776 TRACTOR & 777 TRUCK
Crankshaft Rear Seal and Wear Sleeve
D348 VEHICULAR ENGINE FOR 776 TRACTOR & 777 TRUCK
Service Magazine
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Temporary Use Of Secondary Oil Filter Can Prevent Damage To Rebuilt Engines{1307,1318,1157}
1982/07/19
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29
Specifications
Timing Gears For D348, 776, 777
5.4" BORE, 60 V12 VEHICULAR ENGINE
Disassembly and Assembly
Crankshaft Front Seal
D348 VEHICULAR ENGINE FOR 776 TRACTOR & 777 TRUCK
Front Timing Gear Housing
D348 VEHICULAR ENGINE FOR 776 TRACTOR & 777 TRUCK
Front Timing Gears And Plate
D348 VEHICULAR ENGINE FOR 776 TRACTOR & 777 TRUCK
Rear Timing Gears And Plate
D348 VEHICULAR ENGINE FOR 776 TRACTOR & 777 TRUCK
Service Magazine
Washer, Seal Added To Improve Oil Filter Assembly{1306,1318}
1981/07/13
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Service Magazine
Main And Connecting Rod Bearings With Cavitation Erosion Can Be Used Again{1230,1203,1219}
1980/04/21
Service Tips For Removal And Installation Of Main And Connecting Rod Bearings In Chassis{0611,1203,1219,1230}
1980/07/14
Be Sure To Cut The Center Gasket Even With Top Surface Of Oil Pan Sections To Prevent Oil Leakage{1302}
1980/12/15
New Oil Pan Gasket Has Silicone Bead For Better Seal{1302}
1980/12/22
Corrected &quot;5.4&quot; 60&deg;V Main Bearing Selection Guide&quot; Is Now Available{0374,1203,1202}
1981/02/02
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Reusability Of Camshaft Rollers And Roller Followers{1209,1210}
1982/09/06
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Filter Added To Drain Hole In Water Pumps{1361}
1985/11/18
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Use Heli-Coils To Repair 5.4&quot; Bore Engine Rocker Arm Assemblies{1123,1105}
1986/12/22
New Engine Mount Keeps Forces Caused From Engine Side-To-Side Movement Away From The Frame Of The Vehicle{1152}
1977/03/21
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Change Is Made to Support Beam For Front Of Engine{0643}
1977/10/03
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
New Crankshafts Do Not Have Lightening Holes And Lubrication Passages Connected Together{1202,1219}
1977/11/21
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
New Spring Used In Belt Tightener And/Or Fan Drive Groups{1358,1359}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Vibration Damper Has Stronger Mounting Flange To Prevent Possible Cracks{1205}
1978/06/12
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Improved Piston Pins Are Made Of Different Material For Better Hardness Characteristics When Heat Treated{1214}
1978/08/21
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Piston Groups Use Keystone-Type Piston Rings And Have Improved Design Of Valve Pockets{1214,1215}
1978/12/11
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
New Oil Pan Assembly Uses An O-Ring And Plug For A Better Seal{1302}
1979/03/05
New Oil Pump Has Improved Relief Valve For Better Pressure Control{1304}
1979/05/07
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
New Main And Connecting Rod Bearings Have A Thicker Layer Of Surface Material{1230,1203,1219}
1979/09/17
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
New Camshaft Housing Gasket Has Increased Resistance To High Temperature{1113}
1979/10/15
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Two New Coolant Flow Switches Used On Machines Equipped With Electronic Monitoring System (EMS){1361,7422,7470}
1990/09/24
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
New Crankshaft Seal Groups Used{1160,1161,1202}
1990/11/05
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Specifications
Engine Support For 992, 776, 777
5.4" BORE, 60 V12 VEHICULAR ENGINE
Service Magazine
New Engine Mount Keeps Forces Caused From Engine Side-To-Side Movement Away From The Frame Of The Vehicle{1152}
1977/03/21
Change Is Made to Support Beam For Front Of Engine{0643}
1977/10/03
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Disassembly and Assembly
Oil Pan
D348 VEHICULAR ENGINE FOR 776 TRACTOR & 777 TRUCK
Service Magazine
Be Sure To Cut The Center Gasket Even With Top Surface Of Oil Pan Sections To Prevent Oil Leakage{1302}
1980/12/15
New Oil Pan Gasket Has Silicone Bead For Better Seal{1302}
1980/12/22
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
New Oil Pan Assembly Uses An O-Ring And Plug For A Better Seal{1302}
1979/03/05
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Special Instruction
Use of Piston Pin Bearing Removal and Installation Tools{1218}
Use of Piston Pin Bearing Removal and Installation Tools{1218}
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Specifications
pistons and rings
5.4" BORE, 60 V12 VEHICULAR ENGINE
Connecting Rods
5.4" BORE, 60 V12 VEHICULAR ENGINE
Bearing Surface (Journal) For Connecting Rods
5.4" BORE, 60 V12 VEHICULAR ENGINE
Connecting Rod Bearings
5.4" BORE, 60 V12 VEHICULAR ENGINE
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Disassembly and Assembly
Connecting Rod Bearings
D348 VEHICULAR ENGINE FOR 776 TRACTOR & 777 TRUCK
Pistons
D348 VEHICULAR ENGINE FOR 776 TRACTOR & 777 TRUCK
Service Magazine
Main And Connecting Rod Bearings With Cavitation Erosion Can Be Used Again{1230,1203,1219}
1980/04/21
Service Tips For Removal And Installation Of Main And Connecting Rod Bearings In Chassis{0611,1203,1219,1230}
1980/07/14
Pistons Which Use Keystone-Type Rings Can Be Installed In Place Of Pistons Which Use Rectangular-Type Rings{1215,1214,1213}
1980/08/04
Use Correct Specifications To Check Piston Ring Gaps{1215}
1981/05/25
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Stronger Material Used In Undersize Connecting Rod Bearings{1219}
1977/04/18
New Crankshafts Do Not Have Lightening Holes And Lubrication Passages Connected Together{1202,1219}
1977/11/21
Reference Chart For Main And Connecting Rod Bearings{1203,1219,1230}
1977/11/28
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Testing Connecting Rod Eye Bushings When Overhauling Engines{1218}
1987/07/06
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Improved Piston Pins Are Made Of Different Material For Better Hardness Characteristics When Heat Treated{1214}
1978/08/21
New Piston Groups Use Keystone-Type Piston Rings And Have Improved Design Of Valve Pockets{1214,1215}
1978/12/11
New Oil Jet Tube In Cylinder Block Gives More Clearance For Pistons And Connecting Rods{1201}
1979/03/26
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
New Main And Connecting Rod Bearings Have A Thicker Layer Of Surface Material{1230,1203,1219}
1979/09/17
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Load Piston Body Changes In ICM Pressure Control Valve Group{3073,3030}
1998/05/04
New Guidelines for Inspecting Pistons {1214}
2006/01/02
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
Vibration Damper And Hub
D348 VEHICULAR ENGINE FOR 776 TRACTOR & 777 TRUCK
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
New Spring Used In Belt Tightener And/Or Fan Drive Groups{1358,1359}
1978/01/30
New Vibration Damper Has Stronger Mounting Flange To Prevent Possible Cracks{1205}
1978/06/12
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Fan Belt Tightener Shaft Replacement Procedure Provides Grease Path to Bearings{1358}
1997/03/17
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Bench Test Procedures
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Service Magazine
Wear that is Acceptable in Specific Gear Pumps {4007, 5073, 5073, 7516}
2008/02/04
Special Instruction
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Use of Piston Pin Bearing Removal and Installation Tools{1218}
Use of Piston Pin Bearing Removal and Installation Tools{1218}
Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 4S6553 Engine Evaluation Test Group{0781}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Using the 1U5470 Engine Pressure Group{0781}
Using the 1U5470 Engine Pressure Group{0781}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
Service Tips For Removal And Installation Of Main And Connecting Rod Bearings In Chassis{0611,1203,1219,1230}
1980/07/14
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Make Change To 6V2100 Multitach And 5P9698 Calibrator{0651}
1982/11/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17
Troubleshooting The Tachometer System Of The 4S6553 Engine Instrument Group{0651}
1977/10/10
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
6V117 And 6V2001 Bushings Used In 9S8140 Pressurizing Pump Group Are Available For Parts Service{0651}
1979/06/25
High Pressure Washer Available For Final Drives And Axle Housings Of Off-Highway Trucks {0680,4050,3260}
1998/02/02
Use 9X-3075 Cable Assembly To Download Information From Truck Payload Measurement System{0781}
1998/12/28
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Information that Improves the Service Life of the Remanufactured Air Conditioning Compressor {1357, 1358, 1397, 1802, 1805, 1809, 7320, 7342, 7343}
2008/03/10
Truck Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Special Instruction
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Service Letter-NACD
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Specifications
Rocker Arms
5.4" BORE, 60 V12 VEHICULAR ENGINE
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
Service Letter-China
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
3S3018 Valve Springs Need To Be Removed From Parts Stock
3S3018 Valve Springs Need To Be Removed From Parts Stock
Disassembly and Assembly
Valve Covers
D348 VEHICULAR ENGINE FOR 776 TRACTOR & 777 TRUCK
Service Magazine
Reusability Of Camshaft Rollers And Roller Followers{1209,1210}
1982/09/06
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Higher Temperature Material Used In Camshaft Base Gasket{1113,1120}
1985/10/28
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Use Heli-Coils To Repair 5.4&quot; Bore Engine Rocker Arm Assemblies{1123,1105}
1986/12/22
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
5P8690 Fixture Group And 5P8691 Socket Are Available For Easier Reconditioning Of 5M4169 Cam Followers{0622}
1978/10/23
Do Not Use Heli-Coils&reg; To Repair Rocker Arm Assemblies On 5.4&quot; Bore Engines {1123}
1988/12/19
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23

Truck sale:

 
 
CAT 776

RD Williams Parts
 
 
CAT 776

RD Williams Parts
 
 
CAT 776

RD Williams Parts
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.