AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7W-5931 PUMP GP-GOV & FUEL INJ S/N 63Z19284-22741 Type 1 ALSO AN ATTACHMENT 3306 TRUCK ENGINE


FUEL SYSTEM
GOVERNOR GP
TORQUE CONTROL GP

TRUCK ENGINE 3306 TRUCK ENGINE 63Z
 3306 Truck Engine 63Z00001-22741 SEBP1476 3306 63Z   (1981)

FUEL SYSTEM

GOVERNOR GP
PUMP GP-GOV & FUEL INJ
7E-9350 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7W-5931 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7W-5931 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7W-5931 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7W-5932 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7W-9007 PUMP GP-GOV & FUEL INJ
 

#SEBP14760690
 

7W-5931: PUMP GP-GOV & FUEL INJ

7W-5931 PUMP GP-GOV & FUEL INJ
S/N 63Z19284-22741
Type 1
ALSO AN ATTACHMENT
i00413766 SEBP1476
7W5931 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5735 [1] LEVER AS-PIVOT  
  6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
2. 4W-5734 [1] LEVER AS  
  6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
3. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
4. 8J-8343 [1] SEAL-O-RING  
5. 033-5879 [1] SEAL-O-RING  
6. 8N-5403 [1] SHAFT AS-THROTTLE  
7. 7N-9907 [1] COVER  
  7N-9554 [1] GASKET  
8. 7W-5932 Y [1] PUMP GP-GOV & FUEL INJ  
9. 7N-2176 [1] PIN-DETENT  
10. 8N-3096 [1] SPRING-DETENT  
11. 7N-1052 [1] DOWEL  
12. 1W-1597 CY [1] TORQUE CONTROL GP  
13. 8M-9141 [1] SPRING  
14. 2W-5448 [1] COVER  
  7E-6785 [1] GASKET  
15. 7N-8768 [1] GASKET  
16. 8M-8515 [1] SEAL-O-RING  
17. 5P-6620 [1] SEAL-O-RING  
18. 8N-5784 [1] DEFLECTOR-PULSE  
19. 3J-1907 [1] SEAL-O-RING  
20. 2W-2410 Y [1] GOVERNOR GP  
21. 7C-8993 Y [1] FASTENER GP-FUEL INJ PUMP  
22. 8L-5832 [1] NUT-HEX (10-32-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14760691
 

7W-5931: PUMP GP-GOV & FUEL INJ

7W-5931 PUMP GP-GOV & FUEL INJ
S/N 63Z19284-22741
Type 2
ALSO AN ATTACHMENT
i00413771 SEBP1476
7W5931 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5735 [1] LEVER AS-PIVOT  
  6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
2. 4W-5734 [1] LEVER AS  
  6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
3. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
4. 8J-8343 [1] SEAL-O-RING  
5. 033-5879 [1] SEAL-O-RING  
6. 8N-5403 [1] SHAFT AS-THROTTLE  
7. 7N-9907 [1] COVER  
  150-3727 [1] GASKET-FUEL  
8. 6I-2831 CY [1] PUMP GP-FUEL INJECTION  
9. 7N-2176 [1] PIN-DETENT  
10. 8N-3096 [1] SPRING-DETENT  
11. 7N-1052 [1] DOWEL  
12. 1W-1597 Y [1] TORQUE CONTROL GP  
13. 8M-9141 [1] SPRING  
14. 2W-5448 [1] COVER  
  144-0477 [1] GASKET  
15. 150-3726 [1] GASKET  
16. 8M-8515 [1] SEAL-O-RING  
17. 5P-6620 [1] SEAL-O-RING  
18. 8N-5784 [1] DEFLECTOR-PULSE  
19. 3J-1907 [1] SEAL-O-RING  
20. 2W-2410 Y [1] GOVERNOR GP  
21. 7C-8993 Y [1] FASTENER GP-FUEL INJ PUMP  
22. 8L-5832 [1] NUT-HEX (10-32-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14760692
 

7W-5932: PUMP GP-GOV & FUEL INJ

7W-5932 PUMP GP-GOV & FUEL INJ
S/N 63Z2359-22741
PART OF 7C-0163, 7C-0496, 7C-0497, 7C-5142, 7C-5459, 7W-5931, 7W-9007, 9Y-5576 PUMP GP-GOV & FUEL INJ
ALSO AN ATTACHMENT
i00157277 SEBP1476
7W5932 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [2] PLUG  
  4J-7533 [2] SEAL-O-RING  
2. 1W-3286 [1] RACK-REGULATOR  
3. 1W-3487 Y [1] HOUSING GP-FUEL PUMP  
4. 7W-5928 Y [6] PUMP GP-FUEL INJECTION  
5. 8N-5117 [6] BUSHING-TERMINAL  
6. 7E-4846 [6] SEAL-O-RING  
7. 4W-6869 [6] SPACER (27X32.54X5.049-MM THK)  
8. 7N-1046 [1] GASKET-COVER  
9. 7N-8421 [1] RING-RETAINING  
10. 8N-2487 [1] WASHER-THRUST  
11. 8N-2489 [6] LIFTER AS  
12. 0S-1615 [4] BOLT (1/4-20X0.75-IN)  
13. 7N-1047 [1] COVER-TIMING  
14. 7W-5930 [1] CAMSHAFT AS  
  7W-7331 [1] CAMSHAFT-FUEL PUMP  
15. 8N-2510 [1] SHAFT-WEIGHT CARRIER  
  4N-9019 [1] DOWEL  
16. 7N-7265 [1] SHIELD-WEIGHT CARRIER  
  7N-7264 [4] WEIGHT-GOVERNOR  
  9Y-7037 [4] BOLT (1/4-20X1.25-IN)  
  1S-5440 [4] DOWEL  
17. 8N-2511 [1] CARRIER-WEIGHT  
18. 7N-7166 [2] RACE-THRUST BEARING  
  7L-3326 [1] BEARING-THRUST  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14760693
 

7W-9007: PUMP GP-GOV & FUEL INJ

7W-9007 PUMP GP-GOV & FUEL INJ
S/N 63Z2949-7846
i00418094 SEBP1476
7W9007 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5735 [1] LEVER AS-PIVOT  
  6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  4B-2049 [1] NUT (10-32-THD)  
2. 4W-5734 [1] LEVER AS  
  6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  4B-2049 [1] NUT (10-32-THD)  
3. 7N-5334 [1] SETSCREW-SOCKET (25.4-MM LG)  
  8L-5832 C [1] NUT-HEX (10-32-THD)  
4. 8J-8343 [1] SEAL-O-RING  
5. 033-5879 [1] SEAL-O-RING  
6. 8N-5403 [1] SHAFT AS-THROTTLE  
7. 2W-2410 Y [1] GOVERNOR GP  
8. 7W-5932 Y [1] PUMP GP-GOV & FUEL INJ  
9. 7N-2176 [1] PIN-DETENT  
10. 8N-3096 [1] SPRING-DETENT  
11. 7N-1052 [1] DOWEL  
12. 1W-8668 Y [1] TORQUE CONTROL GP  
13. 2N-2878 [1] SPRING  
14. 2W-5448 [1] COVER  
  2W-5447 [1] GASKET  
15. 8N-5784 [1] DEFLECTOR-PULSE  
16. 8M-8515 [1] SEAL-O-RING  
17. 7C-8993 CY [1] FASTENER GP-FUEL INJ PUMP  
18. 5P-6620 [1] SEAL-O-RING  
19. 7N-9907 [1] COVER  
20. 7N-8768 [1] GASKET  
21. 3J-1907 [1] SEAL-O-RING  
22. 7N-9554 [1] GASKET  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14760694
 

8N-2524: PUMP GP-GOV & FUEL INJ

8N-2524 PUMP GP-GOV & FUEL INJ
S/N 63Z1-589
PART OF 1W-2768, 1W-6444 PUMP GP-GOV & FUEL INJ
i00193833 SEBP1476
8N2524 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-2508 Y [1] GOVERNOR GP  
2. 7N-8768 [1] GASKET  
3. 0S-1614 [3] BOLT (1/4-20X0.5-IN)  
4. 8N-5784 [1] DEFLECTOR-PULSE  
5. 8B-2377 [4] BOLT (1/4-20X2-IN)  
6. 7N-9907 [1] COVER  
  7N-9554 [1] GASKET  
7. 1B-2713 [2] BOLT (1/4-20X1.75-IN)  
  4B-4276 [2] WASHER (7X16X1.6-MM THK)  
8. 4F-7957 [6] BOLT (1/4-20X0.875-IN)  
9. 8N-2525 Y [1] PUMP GP-GOV & FUEL INJ  
10. 0S-1615 [1] BOLT (1/4-20X0.75-IN)  
11. 7N-6831 Y [1] PUMP GP-FUEL TRANSFER  
  4J-8997 [1] SEAL-O-RING  
12. 8F-6302 [1] BOLT (1/4-20X3.75-IN)  
13. 0S-1616 [1] BOLT (1/4-20X1-IN)  
14. 6B-4198 [2] BOLT (1/4-20X4.19-IN)  
15. 4N-1761 [4] BOLT (1/4-20X6.5-IN)  
  2S-7383 [1] BOLT (1/4-20X3.25-IN)(DRILLED HEAD)  
  8F-8178 [2] BOLT (1/4-20X3.25-IN)  
16. 9S-4191 C [1] PLUG (9/16-18-THD)  
  3J-1907 C [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14760695
 

8N-2525: PUMP GP-GOV & FUEL INJ

8N-2525 PUMP GP-GOV & FUEL INJ
S/N 63Z1-589
PART OF 8N-2524 PUMP GP-GOV & FUEL INJ
i00193834 SEBP1476
8N2525 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [2] PLUG  
  4J-7533 [2] SEAL-O-RING  
2. 1W-3286 C [1] RACK-REGULATOR  
3. 1W-3487 CY [1] HOUSING GP-FUEL PUMP  
4. 8N-2517 Y [6] PUMP GP-FUEL INJECTION  
5. 8N-5117 [6] BUSHING-TERMINAL  
6. 3D-2992 [6] SEAL  
7. 7N-1053 [6] SPACER  
8. 8N-2513 Y [1] CAMSHAFT AS  
9. 7N-8421 [1] RING-RETAINING  
10. 8N-2487 [1] WASHER-THRUST  
11. 8N-2489 [6] LIFTER AS  
12. 0S-1615 [4] BOLT (1/4-20X0.75-IN)  
13. 7N-1047 [1] COVER-TIMING  
  7N-1046 [1] GASKET-COVER  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14760696
 

8N-2525: PUMP GP-GOV & FUEL INJ

8N-2525 PUMP GP-GOV & FUEL INJ
S/N 63Z1-4938
PART OF 1W-7276, 2W-2411, 2W-5766, 2W-5767, 2W-5768, 2W-6227, 4W-7969, 8N-2524 PUMP GP-GOV & FUEL INJ
i00157298 SEBP1476
8N2525 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [2] PLUG  
  4J-7533 [2] SEAL-O-RING  
2. 1W-3286 [1] RACK-REGULATOR  
3. 1W-3487 Y [1] HOUSING GP-FUEL PUMP  
4. 1W-6539 CY [6] PUMP GP-FUEL INJECTION  
5. 8N-5117 [6] BUSHING-TERMINAL  
6. 7E-4846 [6] SEAL-O-RING  
7. 4W-6869 [6] SPACER (27X32.54X5.049-MM THK)  
8. 8N-2513 Y [1] CAMSHAFT AS  
9. 7N-8421 [1] RING-RETAINING  
10. 8N-2487 [1] WASHER-THRUST  
11. 8N-2489 [6] LIFTER AS  
12. 0S-1615 [4] BOLT (1/4-20X0.75-IN)  
13. 7N-1047 [1] COVER-TIMING  
  7N-1046 [1] GASKET-COVER  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14760697
 

8N-2525: PUMP GP-GOV & FUEL INJ

8N-2525 PUMP GP-GOV & FUEL INJ
S/N 63Z590-4938
PART OF 2W-2411 PUMP GP-GOV & FUEL INJ
i00429843 SEBP1476
8N2525 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4180 [2] PLUG  
  4J-7533 [2] SEAL-O-RING  
2. 1W-3286 [1] RACK-REGULATOR  
3. 6I-2987 [1] HOUSING AS-PUMP  
4. 1W-6539 Y [6] PUMP GP-FUEL INJECTION  
5. 8N-5117 [6] BUSHING-TERMINAL  
6. 114-8718 [6] SEAL-O-RING  
7. 4W-6869 [6] SPACER (27X32.54X5.049-MM THK)  
8. 8N-2513 Y [1] CAMSHAFT AS  
9. 7N-8421 [1] RING-RETAINING  
10. 8N-2487 [1] WASHER-THRUST  
11. 4P-9832 [6] LIFTER AS  
12. 0S-1615 [4] BOLT (1/4-20X0.75-IN)  
13. 7N-1047 [1] COVER-TIMING  
  7N-1046 [1] GASKET-COVER  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14760698
 

9Y-5576: PUMP GP-GOV & FUEL INJ

9Y-5576 PUMP GP-GOV & FUEL INJ
S/N 63Z8966-18081
ALSO AN ATTACHMENT
i00443979 SEBP1476
9Y5576 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3306 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5735 [1] LEVER AS-PIVOT  
2. 4W-5734 [1] LEVER AS  
  6V-6835 [1] SETSCREW-SOCKET (10-32X0.625-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
3. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
4. 8J-8343 [1] SEAL-O-RING  
5. 033-5879 [1] SEAL-O-RING  
6. 8N-5403 [1] SHAFT AS-THROTTLE  
7. 7N-9907 [1] COVER  
8. 7W-5932 Y [1] PUMP GP-GOV & FUEL INJ  
9. 7N-2176 [1] PIN-DETENT  
10. 8N-3096 [1] SPRING-DETENT  
11. 7N-1052 [1] DOWEL  
12. 1W-8668 Y [1] TORQUE CONTROL GP  
13. 8N-9594 [1] SPRING  
14. 2W-5448 [1] COVER  
  2W-5447 [1] GASKET  
15. 7N-8768 [1] GASKET  
16. 8M-8515 [1] SEAL-O-RING  
17. 5P-6620 [1] SEAL-O-RING  
18. 8N-5784 [1] DEFLECTOR-PULSE  
19. 3J-1907 [1] SEAL-O-RING  
20. 2W-2410 Y [1] GOVERNOR GP  
21. 7C-8993 Y [1] FASTENER GP-FUEL INJ PUMP  
22. 7N-9554 [1] GASKET  
  Y   SEPARATE ILLUSTRATION
 

#SEBP14760699
 

1W-1597: TORQUE CONTROL GP

1W-1597 TORQUE CONTROL GP
S/N 63Z1034-22741
PART OF 2W-5766, 2W-5768, 4P-5891, 4W-7969, 7E-9349, 7W-5931 PUMP GP-GOV & FUEL INJ
ALSO AN ATTACHMENT
i00146594 SEBP1476
1W1597 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your 3306 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-5897 C [2] BOLT (1/4-20X0.875-IN)  
2. 7W-5700 C [1] CONTACT  
3. 2W-7234 C [1] BAR-LOAD STOP (4-MM)  
4. 7N-1796 C [1] SPACER (1.549-MM THK)  
5. 1P-6452 [1] INSULATOR  
6. 2P-2685 [1] SPACER (0.635-MM THK)  
7. 8M-9062 [1] RETAINER-SPRING (3.05-MM THK)  
8. 8N-7520 [1] SPRING-TORQUE (0.559-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Truck Engine News
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement
1981/05/12
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/09/01
New Torque Specification For Fuel Injection Pump Bushing
1982/09/29
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier
1982/12/08
New Gasket And Cover Used On Governors
1983/05/18
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/23
Governor Flyweight Shield No Longer Used In New Scroll Fuel Systems
1985/01/01
Over Fueling Spring No Longer Used In Governor
1985/02/01
Fuel Transfer Pump Improved
1985/10/01
Bolt Removed From Governor And Fuel Injection Pump Group
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
New Material Used For Disc In Valve Assemblies In Fuel Transfer Pump Groups
1986/08/01
Seals In Variable Timing Advance Available For Parts Service
1988/07/01
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/01
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups
1993/06/01
Improved Fuel Pump Bonnet Seal Has Better Heat Resistance{1251}
1994/09/01
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting{1278,1287}
1996/01/23
Governor Spring Guide Press Depth{1287,1284}
1996/01/23
Governor Control Cover Assembly Includes New Seal And Improved Cover{1264}
1997/07/01
Engine News
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Use of 6V6070 Governor Adjusting Tool Group{1250}
Use of 6V6070 Governor Adjusting Tool Group{1250}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Check Assembled Dimension for Rack Lever Travel{1264, 1250}
Check Assembled Dimension for Rack Lever Travel{1264, 1250}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Service Letter-NACD
The Governor Rack Servo Cylinder Assembly Needs To Be Replaced On Certain 3306B And 3406B Truck Engines
The Governor Rack Servo Cylinder Assembly Needs To Be Replaced On Certain 3306B And 3406B Truck Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Fuel Injection<BR> Injection Timing Before Top Center (BTC)
3306B DIESEL TRUCK ENGINE
Fuel Injection Pump
3306B DIESEL TRUCK ENGINE
Governor
3306B DIESEL TRUCK ENGINE
Governor Control (Low Speed Regulation)
3306B DIESEL TRUCK ENGINE
Governor Control Linkage
3306B DIESEL TRUCK ENGINE
Automatic Timing Advance
3306B DIESEL TRUCK ENGINE
Service Letter-China
The Governor Rack Servo Cylinder Assembly Needs To Be Replaced On Certain 3306B And 3406B Truck Engines
The Governor Rack Servo Cylinder Assembly Needs To Be Replaced On Certain 3306B And 3406B Truck Engines
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Injection Nozzles
3306B DIESEL TRUCK ENGINE
Fuel Injection Pumps
3306B DIESEL TRUCK ENGINE
Fuel Injection Pump Housing
3306B DIESEL TRUCK ENGINE
Fuel Ratio Control
3306B DIESEL TRUCK ENGINE
Oil Filter And Oil Filter Base
3306B DIESEL TRUCK ENGINE
Cylinder Liners
3306B DIESEL TRUCK ENGINE
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
New Torque Specification For Fuel Injection Pump Bushing{1251,1253}
1982/08/09
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
New Gasket And Cover Used On Governors{1264}
1983/04/25
New Fuel Ratio Control Group Has Improved Diaphragm{1278,1257,1251}
1983/08/15
Remanufactured Fuel Pump And Governor Groups{1251,1264}
1983/10/17
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Fuel System Manual Bleed Valve Removed; Drain Lines Group Added{1251,1253,1286}
1984/02/13
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Fuel Transfer Pump Improved{1256}
1985/10/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Check Assembled Dimension For Rack Lever Travel If Governor Housing Assembly Is Replaced {1264}
1988/12/19
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14

Caterpillar Parts SIS Catalog 3306 :

PUMP GP-GOV & FUEL INJ
7W-5931 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7E-9350 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7E-9350 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7E-9349 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7E-9349 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-7606 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-7606 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7C-7260 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7W-5931 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7W-5932 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
7W-9007 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
8N-2524 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
8N-2525 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
8N-2525 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
8N-2525 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
9Y-5576 PUMP GP-GOV & FUEL INJ

Truck sale:

 
9,775 
Caterpillar 3306T, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
FINANZAUTO S.A.
Caterpillar 3306T, Stationary Generator Sets, Construction
35,500 
Caterpillar 3306T, Stationary Generator Sets, Construction
- Stationary Generator Sets
RING POWER CORP.
Caterpillar 3306, Stationary Generator Sets, Construction
8,185 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3306, Stationary Generator Sets, Construction
41,500 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
35,000 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.