3G2991 CYLINDER GP-LIFT-(CHG N04) S/N 4NB1-1603 120.65 MM (4.75 IN.) BORE X 675 MM (26.05 IN.) STROKE PART OF 3V6318 SEAL & CYLINDER 926



HYDRAULIC SYSTEM
CYLINDER GP
OPERATOR STATION
CONTROL GP-HYDRAULIC
CONTROL GP-HYDRAULIC LOCKOUT

WHEEL LOADER 926 WHEEL LOADER 4NB
 926 WHEEL LOADER 4NB00001-02075 (MACHINE) POWERED BY 3204 ENGINE SEBP1485 926 4NB   (1991)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER & MOUNTING GP
3V-6286 CYLINDER & MOUNTING GP
CYLINDER & SEAL GP-TILT
3V-6315 CYLINDER & SEAL GP-TILT
CYLINDER & SEAL GP
3V-6329 CYLINDER & SEAL GP
CYLINDER & SEAL GP-LIFT
3V-6318 CYLINDER & SEAL GP-LIFT
CYLINDER GP-LIFT
3G-2991 CYLINDER GP-LIFT
CYLINDER GP-LIFT
3G-2991 CYLINDER GP-LIFT
CYLINDER GP-LIFT
3G-2991 CYLINDER GP-LIFT
CYLINDER GP-TILT
3G-2798 CYLINDER GP-TILT
 

#SEBP14850390
 

3G-2991: CYLINDER GP-LIFT

3G2991 CYLINDER GP-LIFT-(CHG N04)
S/N 4NB1-1603
120.65 MM (4.75 IN.) BORE X 675 MM (26.05 IN.) STROKE
PART OF 3V6318 SEAL & CYLINDER
c319248 SEBP1485
3G2991 CYLINDER GP-LIFT Parts scheme
  For full view, you need register

Parts for your 926 WHEEL LOADER:

Pos. Part No Qty Parts name Comments
1. 4J-3342 [1] RING-WEAR  
2. 5J-4987 [1] SEAL AS  
3. 8J-5965 [1] PISTON  
4. 5J-3620 [1] SEAL-RING  
   
5. 5J-0964 [1] SEAL-U-CUP  
6. 3G-3910 [1] CROWN  
7. 3G-2983 R [1] ROD AS  
8. 1K-6982 [1] SEAL-LIP TYPE  
9. 2J-3961 [1] RING-BACK-UP  
10. 5H-6734 [1] SEAL-O-RING  
   
11. 8J-5966 [1] HEAD  
12. 3G-2986 [1] CYLINDER AS  
13. 3G-2977 [1] BEARING-SLEEVE  
14. 3S-6162 [1] WASHER-HARD  
15. 8J-6164 [1] BOLT-SELF LOCKING  
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP14850391
 

3G-2991: CYLINDER GP-LIFT

3G2991 CYLINDER GP-LIFT-(CHG 01)
S/N 4NB1604-1961
120.65 MM (4.75 IN.) BORE X 675 MM (26.05 IN.) STROKE
PART OF 3V6318 SEAL & CYLINDER
c354100 SEBP1485
3G2991 CYLINDER GP-LIFT Parts scheme
  For full view, you need register

Parts for your 926 WHEEL LOADER:

Pos. Part No Qty Parts name Comments
1. 4J-3342 J [1] RING-WEAR  
2. 5J-4987 J [1] SEAL AS  
3. 8J-5965 [1] PISTON  
4. 5J-3620 J [1] SEAL-RING  
5. 5J-0964 J [1] SEAL-U-CUP  
6. 3G-3910 [1] CROWN  
   
7. 3G-2983 R [1] ROD AS  
8. 1K-6982 J [1] SEAL-LIP TYPE  
9. 2J-3961 J [1] RING-BACK-UP  
10. 5H-6734 J [1] SEAL-O-RING  
11. 8J-5966 [1] HEAD  
12. 9T-4305 CR [1] CYLINDER AS  
13. 3G-2977 [1] BEARING-SLEEVE  
14. 3S-6162 [1] WASHER-HARD  
   
15. 8J-6164 [1] BOLT-SELF LOCKING  
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-1381 C [1] KIT-HYD CYLINDER SEAL (SEAL)  
    (INCL. PARTS MARKED J)
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP14850392
 

3G-2991: CYLINDER GP-LIFT

3G2991 CYLINDER GP-LIFT-(CHG 02-03)
S/N 4NB1962-UP
120.65 MM (4.75 IN.) BORE X 675 MM (26.5 IN.) STROKE
PART OF 3V6318 SEAL & CYLINDER
c512929 SEBP1485
3G2991 CYLINDER GP-LIFT Parts scheme
  For full view, you need register

Parts for your 926 WHEEL LOADER:

Pos. Part No Qty Parts name Comments
1. 4J-3342 J [1] RING-WEAR  
2. 5J-4987 J [1] SEAL AS  
3. 8J-5965 [1] PISTON  
4. 8C-3839 J [1] SEAL AS  
5. 5J-0964 J [1] SEAL-U-CUP  
6. 3G-3910 [1] CROWN  
7. 3G-2983 R [1] ROD AS  
8. 8C-3840 J [1] SEAL-LIP TYPE  
9. 2J-3961 J [1] RING-BACK-UP  
10. 5H-6734 J [1] SEAL-O-RING  
11. 9T-4763 C [1] HEAD  
12. 9T-4305 R [1] CYLINDER AS  
13. 3G-2977 [1] BEARING-SLEEVE  
14. 3S-6162 [1] WASHER-HARD  
15. 1J-2921 C [1] BOLT  
16. 8T-5668 C [1] RING-WEAR  
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-1381 [1] KIT-HYD CYLINDER SEAL  
    (INCL. PARTS MARKED J)
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP14850393
 

3G-2798: CYLINDER GP-TILT

3G2798 CYLINDER GROUP-TILT-(CHG 04-05)
139.07 MM(5.50 IN.) BORE X 520 MM(20.04 IN) STROKE
PART OF 3V6315 SEAL AND CYLINDER
c344028 SEBP1485
3G2798 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your 926 WHEEL LOADER:

Pos. Part No Qty Parts name Comments
1. 3G-2787 R [1] CYLINDER AS  
  8D-3508 [1] BOSS  
2. 3G-2791 [1] BEARING-SLEEVE  
3. 2J-0564 [1] NUT-SELF LOCKING  
4. 7J-1731 J [1] RING-WEAR  
5. 3G-4406 [1] PISTON  
6. 5J-3620 J [1] SEAL-RING  
7. 5J-0964 J [1] SEAL-U-CUP  
8. 4T-1668 [1] CROWN  
9. 3B-8489 [1] FITTING-GREASE  
10. 4T-2667 R [1] ROD AS  
11. 3G-2797 [1] BEARING-SLEEVE  
12. 1K-6982 J [1] SEAL-LIP TYPE  
13. 2H-9247 J [1] SEAL-O-RING  
  2K-2961 J [1] RING-BACK-UP  
14. 4T-7994 [1] HEAD  
15. 3G-1757 [1] WASHER  
16. 5J-4988 J [1] SEAL AS  
   
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  8T-3576 C [1] KIT-HYD CYLINDER SEAL  
    (INCL PARTS MARKED J)
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP14850394
 

8V-1178: CONTROL GP-MECHANICAL HYD

8V1178 MECHANICAL HYDRAULIC CONTROL GROUP-PART 1 OF 2
c412291 SEBP1485
8V1178 CONTROL GP-MECHANICAL HYD Parts scheme
  For full view, you need register

Parts for your 926 WHEEL LOADER:

Pos. Part No Qty Parts name Comments
1. 5P-7921 [9] SCREW-WASHER HEAD  
2. 9V-5148 [1] LEVER (LIFT)  
3. 5P-1075 [14] WASHER-HARD  
4. 0L-1170 [2] HANDLE-LEVER  
5. 9C-2349 C [1] LEVER (TILT)  
6. 5P-7705 [1] PLUG-BUTTON  
7. 9V-8467 [1] PLATE  
8. 9V-8466 [1] PLATE  
9. 9V-8418 [1] PLATE  
10. 9G-9891 [2] SOLENOID AS-24V  
    (EACH INCLUDES)
  9G-9508 [1] BOOT  
11. 9V-8464 [1] COVER  
12. 9V-8521 [1] STRIP AS  
  9F-6445 [1] NUT  
13. 6V-8187 [2] NUT  
14. 5P-4115 [5] WASHER (HARD)  
15. 7J-0435 [2] ROD  
16. 9V-8537 [1] PAD  
17. 9S-1303 [2] PIN  
18. 6C-1543 [2] PIN  
19. 6W-4737 C [2] LINK  
20. 6V-8918 [2] BOLT  
21. 6V-8189 [2] NUT (FULL)  
22. 7M-9847 [2] SPRING  
23. 3F-7674 [2] NUT-SELF LOCKING  
24. 5M-3062 [13] BOLT  
25. 5P-8167 [1] BOLT  
26. 2H-3903 [1] SETSCREW-SOCKET  
27. 9J-5846 [2] ROLLER-CAMSHAFT  
  8H-9190 C [3] SHIM .762MM(.030IN)THK  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14850395
 

8V-1178: CONTROL GP-MECHANICAL HYD

8V1178 MECHANICAL HYDRAULIC CONTROL GROUP-PART 2 OF 2
c412292 SEBP1485
8V1178 CONTROL GP-MECHANICAL HYD Parts scheme
  For full view, you need register

Parts for your 926 WHEEL LOADER:

Pos. Part No Qty Parts name Comments
1. 8V-2761 [2] LEVER  
2. 6H-7062 [1] SPACER  
3. 3V-0060 [4] BEARING  
4. 8V-2641 [1] SHAFT  
5. 9K-4848 [2] WASHER-THRUST  
6. 8V-2665 [1] SHAFT AS  
7. 3V-3355 [4] BEARING  
8. 2V-7859 B [7] BEARING  
9. 9M-7783 [1] SPACER  
10. 8V-2672 [1] SPACER  
11. 4V-0152 [2] WASHER-THRUST  
12. 9V-8450 [1] BRACKET AS  
13. 9V-8458 [1] SUPPORT AS  
  9F-2978 [1] NUT-WELD  
14. 5P-6410 BD SEAL  
15. 5P-1075 [7] WASHER-HARD  
16. 4L-9337 [4] BOLT  
17. 5P-7921 [4] SCREW-WASHER HEAD  
18. 9V-8473 [1] PLATE AS  
  9F-6445 [2] NUT  
19. 5M-3062 [2] BOLT  
20. 9V-1312 B [6] BEARING  
21. 6D-2928 [2] BOLT  
22. 010-2571 [2] SETSCREW-SOCKET  
23. 4L-6454 [1] BOLT  
24. 5P-4115 [6] WASHER (HARD)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
 

#SEBP14850396
 

8V-6921: CONTROL GP-MECHANICAL HYD

8V6921 CONTROL GP-MECHANISM HYDRAULIC-3RD VALVE
TYPE 1
PART OF 6C0638 HYDRAULIC AR, 6W2948 CONVERSION AR-FIELD
AN ATTACHMENT
c401792 SEBP1485
8V6921 CONTROL GP-MECHANICAL HYD Parts scheme
  For full view, you need register

Parts for your 926 WHEEL LOADER:

Pos. Part No Qty Parts name Comments
1. 8V-2640 [1] SPACER  
2. 2V-7859 CB [4] BEARING  
3. 3V-3355 [2] BEARING  
4. 7M-0706 [1] KNOB  
5. 5B-9079 [2] NUT-JAM  
6. 8V-2760 [1] LEVER (3RD. VALVE)  
7. 2A-4996 [1] BOLT  
8. 8V-2671 [1] SPACER  
9. 2L-6267 [1] LOCKNUT  
10. 4D-4064 [1] ROD END  
11. 8V-4518 [1] BOOT  
12. 9V-6319 [1] ROD (3RD VALVE)  
13. 1A-8285 [1] NUT-JAM  
14. 061-8121 [1] ROD END-YOKE  
15. 3K-5601 [1] PIN-CLEVIS  
16. 3B-4613 [1] COTTER  
17. 9V-9517 [1] BRACKET AS  
18. 9V-8463 [1] COVER  
19. 9V-8537 [1] PAD  
20. 6V-7405 [1] PLATE-INSTRUCTION  
21. 5C-8814 C [2] SEAL  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14850397
 

8V-6921: CONTROL GP-MECHANICAL HYD

8V6921 CONTROL GP-MECHANISM HYDRAULIC-3 VALVE
TYPE 2
PART OF 6C0638 HYDRAULIC AR, 6W2948 CONVERSION AR-FIELD
AN ATTACHMENT
c411804 SEBP1485
8V6921 CONTROL GP-MECHANICAL HYD Parts scheme
  For full view, you need register

Parts for your 926 WHEEL LOADER:

Pos. Part No Qty Parts name Comments
1. 8V-2640 [1] SPACER  
2. 2V-7859 B [4] BEARING  
3. 3V-3355 [2] BEARING  
4. 7M-0706 [1] KNOB (GEARSHIFT)  
5. 6V-8183 C [2] NUT-FULL  
6. 8V-2760 [1] LEVER (3RD VALVE)  
7. 2A-4996 [1] BOLT  
8. 8V-2671 [1] SPACER  
9. 3K-9767 C [1] NUT-SELF LOCKING  
10. 4D-4064 [1] ROD END  
11. 8V-4518 [1] BOOT  
12. 6W-4850 C [1] ROD (3RD VALVE)  
13. 5C-8814 [1] SEAL  
14. 1A-9252 C [1] END-ADJUSTABLE ROD  
15. 3K-5601 [1] PIN-CLEVIS  
  3B-4613 [1] COTTER  
17. 9V-9517 [1] BRACKET AS  
18. 9V-8463 [1] COVER  
19. 9V-8537 [1] PAD  
20. 6V-7405 [1] PLATE-INSTRUCTION  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14850398
 

9V-2675: LOCK GP-HYDRAULIC HAND CONTROL

9V2675 LOCK GP-HYDRAULIC HAND CONTROL-2 LEVER
c355886 SEBP1485
9V2675 LOCK GP-HYDRAULIC HAND CONTROL Parts scheme
  For full view, you need register

Parts for your 926 WHEEL LOADER:

Pos. Part No Qty Parts name Comments
1. 5P-8167 C [2] BOLT  
2. 5S-7379 C [3] BOLT  
3. 5P-4115 [1] WASHER (HARD)  
4. 9N-1216 [1] TUBE  
5. 2H-3903 [1] SETSCREW-SOCKET  
6. 9V-1235 [1] PIN AS  
7. 9V-1232 [1] SHAFT AS  
8. 9V-1225 [1] BLOCK  
9. 4L-6458 [2] NUT-FULL  
10. 037-6874 [1] STUD  
11. 5H-1472 [1] BALL  
12. 2F-5326 [1] SETSCREW (SOCKET)  
13. 3V-7054 [1] SPRING  
14. 9F-3691 C [1] SPACER  
15. 8T-4896 C [4] WASHER-HARD  
16. 2N-7638 [1] KNOB (LOCKING)  
17. 9V-8538 C [1] ANGLE AS  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP14850399
 

8V-1156: LOCK GP-HYDRAULIC HAND CONTROL

8V1156 LOCK GP-HYDRAULIC CONTROL-3 LEVER
PART OF 6C0638 HYDRAULIC AR
AN ATTACHMENT
c354043 SEBP1485
8V1156 LOCK GP-HYDRAULIC HAND CONTROL Parts scheme
  For full view, you need register

Parts for your 926 WHEEL LOADER:

Pos. Part No Qty Parts name Comments
1. 9V-8538 C [1] ANGLE AS  
2. 5S-7349 C [1] BOLT  
3. 5P-4115 C [1] WASHER  
4. 9V-1236 [1] SPACER  
5. 9V-1235 [2] PIN AS  
6. 9V-1232 [1] SHAFT AS  
7. 9V-1225 [1] BLOCK  
8. 2H-3903 [1] SETSCREW-SOCKET  
9. 4L-6458 [2] NUT-FULL  
10. 037-6874 [1] STUD  
11. 5H-1472 [1] BALL  
12. 2F-5326 [1] SETSCREW  
13. 3V-7054 [1] SPRING  
14. 5S-7379 C [2] BOLT  
15. 8T-4896 C [4] WASHER-HARD  
16. 2N-7638 [1] KNOB (LOCKING)  
17. 5P-8167 C [2] BOLT  
18. 9F-3691 C [1] SPACER  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Special Instruction
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 926 :

CYLINDER & SEAL GP-LIFT
3V-6318 CYLINDER & SEAL GP-LIFT
CYLINDER & SEAL GP
3V-6329 CYLINDER & SEAL GP
CYLINDER & SEAL GP-TILT
3V-6315 CYLINDER & SEAL GP-TILT
CYLINDER GP-STEER
3G-3501 CYLINDER GP-STEER
VALVE GP-SHUTTLE
4T-1860 VALVE GP-SHUTTLE
CYLINDER & MOUNTING GP
3V-6286 CYLINDER & MOUNTING GP
VALVE GP-CHECK & RELIEF
4T-0947 VALVE GP-CHECK & RELIEF
VALVE GP-CHECK & RELIEF
4T-1642 VALVE GP-CHECK & RELIEF
CYLINDER GP-LIFT
3G-2991 CYLINDER GP-LIFT
CYLINDER GP-LIFT
3G-2991 CYLINDER GP-LIFT
CYLINDER GP-TILT
3G-2798 CYLINDER GP-TILT
CONTROL GP-MECHANICAL HYD
8V-1178 CONTROL GP-MECHANICAL HYD
CONTROL GP-MECHANICAL HYD
8V-1178 CONTROL GP-MECHANICAL HYD
CONTROL GP-MECHANICAL HYD
8V-6921 CONTROL GP-MECHANICAL HYD
CONTROL GP-MECHANICAL HYD
8V-6921 CONTROL GP-MECHANICAL HYD
LOCK GP-HYDRAULIC HAND CONTROL
9V-2675 LOCK GP-HYDRAULIC HAND CONTROL