AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3408B Marine Engine 99U04604-07598 AIR INLET AND EXHAUST SYSTEM Caterpillar SIS



MARINE ENGINE 3408B MARINE ENGINE 99U
 3408B Marine Engine 99U04604-07598 SEBP1490 3408B 99U   (1976)

Parts group 3408B:

  For full view, you need register
AIR INLET AND EXHAUST SYSTEM
AFTERCOOLER GP
AFTERCOOLER GP-WATER
4N-7173 AFTERCOOLER GP-WATER
4N-7173 AFTERCOOLER GP-WATER
S/N 99U4604-4648
AFTERCOOLER GP-WATER
4N-7173 AFTERCOOLER GP-WATER
4N-7173 AFTERCOOLER GP-WATER
S/N 99U4649-7598
AIR CLEANER GP
ADAPTER GP-AIR CLEANER
4N-5498 ADAPTER GP-AIR CLEANER
4N-5498 ADAPTER GP-AIR CLEANER
PROVIDES A 6 INCH O.D. ADAPTER FOR PRECLEANER INSTALLATION OR CONNECTION TO REMOTE AIR SUPPLY
CANNOT BE USED WITH TWO STAGE AIR CLEANER
AN ATTACHMENT
AIR CLEANER GP
8N-3111 AIR CLEANER GP
8N-3111 AIR CLEANER GP
FOR USE WITH SAE NO.0 FLYWHEEL HOUSING
AN ATTACHMENT
AIR CLEANER GP
8N-3371 AIR CLEANER GP
8N-3371 AIR CLEANER GP
FOR USE WITH LH DUPLEX FUEL FILTERS & PRIMARY FUEL FILTERS
AN ATTACHMENT
AIR CLEANER GP
8N-3372 AIR CLEANER GP
8N-3372 AIR CLEANER GP
FOR USE WITH LH DUPLEX FUEL FILTERS & PRIMARY FUEL FILTERS
AN ATTACHMENT
AIR CLEANER GP
8N-5766 AIR CLEANER GP
8N-5766 AIR CLEANER GP
4N7808 SOOT FILTER IS AVAILABLE
PART OF 8N-3111, 8N-3371, 8N-3372 AIR CLEANER GP
AN ATTACHMENT
LINES GP-AIR
LINES GP-AIR
4N-7172 LINES GP-AIR
4N-7172 LINES GP-AIR
MANIFOLD GP-EXHAUST
MANIFOLD GP-EXHAUST
4N-1886 MANIFOLD GP-EXHAUST
4N-1886 MANIFOLD GP-EXHAUST
MUFFLER GP
112-7596 MOUNTING GP-MUFFLER
112-7596 MOUNTING GP-MUFFLER
PART OF 112-4776 MUFFLER GP
AN ATTACHMENT
MUFFLER
2W-4072 MUFFLER
2W-4072 MUFFLER
152-MM (6-INCH)
AN ATTACHMENT
112-4776 MUFFLER GP
112-4776 MUFFLER GP
PART OF 111-9134, 112-2220, 112-2221 ENCLOSURE AR
AN ATTACHMENT
SHUTOFF GP-AIR
SHUTOFF GP-AIR
3N-8164 SHUTOFF GP-AIR
3N-8164 SHUTOFF GP-AIR
24 VOLT
FOR USE WITH ELECTRIC SHUT-OFF ON RADIATOR COOLED MARINE ENGINE
AN ATTACHMENT
TURBOCHARGER GP
LINES GP-TURBOCHARGER OIL
6N-4572 LINES GP-TURBOCHARGER OIL
6N-4572 LINES GP-TURBOCHARGER OIL
FOR USE WITH @@@@@ 1W-2237@@@@@
CARTRIDGE GP-TURBOCHARGER
1N-3999 CARTRIDGE GP-TURBOCHARGER
1N-3999 CARTRIDGE GP-TURBOCHARGER
PART OF 1N-3991 TURBOCHARGER GP
AN ATTACHMENT
CARTRIDGE GP-TURBOCHARGER
1W-1653 CARTRIDGE GP-TURBOCHARGER
1W-1653 CARTRIDGE GP-TURBOCHARGER
S/N 99U4604-4737
PART OF 1W-1654 TURBOCHARGER GP
CARTRIDGE GP-TURBOCHARGER
6N-7960 CARTRIDGE GP-TURBOCHARGER
6N-7960 CARTRIDGE GP-TURBOCHARGER
S/N 99U4738-7598
PART OF 1W-5285 TURBOCHARGER GP
ALSO AN ATTACHMENT
CARTRIDGE GP-TURBOCHARGER
7W-0489 CARTRIDGE GP-TURBOCHARGER
7W-0489 CARTRIDGE GP-TURBOCHARGER
S/N 99U4605-7598
PART OF 4W-7637 TURBOCHARGER GP
ALSO AN ATTACHMENT
TURBOCHARGER GP
1N-3991 TURBOCHARGER GP
1N-3991 TURBOCHARGER GP
PART OF 6N-2948 TURBOCHARGER GP
AN ATTACHMENT
TURBOCHARGER GP
1W-1654 TURBOCHARGER GP
1W-1654 TURBOCHARGER GP
S/N 99U4604-4737
PART OF 1W-2237 TURBOCHARGER GP
TURBOCHARGER GP
1W-2237 TURBOCHARGER GP
1W-2237 TURBOCHARGER GP
S/N 99U4604-4737
FOR USE WITH @@@@@ 6N-4572@@@@@
TURBOCHARGER GP
1W-5285 TURBOCHARGER GP
1W-5285 TURBOCHARGER GP
S/N 99U4738-7598
LH
PART OF 4P-9350, 5N-9004, 7C-2947 KIT-ENGINE PARTS, 4W-7482 TURBOCHARGER GP
ALSO AN ATTACHMENT
TURBOCHARGER GP
4W-7482 TURBOCHARGER GP
4W-7482 TURBOCHARGER GP
S/N 99U4738-7598
TURBOCHARGER GP
4W-7637 TURBOCHARGER GP
4W-7637 TURBOCHARGER GP
S/N 99U4605-7598
PART OF 4P-9351, 7W-4410 KIT-ENGINE PARTS, 4W-8052 TURBOCHARGER GP
ALSO AN ATTACHMENT
TURBOCHARGER GP
4W-8052 TURBOCHARGER GP
4W-8052 TURBOCHARGER GP
S/N 99U4605-7598
WATERCOOLED
TURBOCHARGER GP
6N-2948 TURBOCHARGER GP
6N-2948 TURBOCHARGER GP -WATERCOOLED
AN ATTACHMENT
AFTERTREATMENT GP
FILTER-SOOT
4N-7808 FILTER-SOOT
4N-7808 FILTER-SOOT
FOR USE WITH 8N-5766 AIR CLEANER GP, PANEL TYPE AIR CLEANERS
AN ATTACHMENT
LINES GP-EXHAUST
CAP AS-RAIN
6N-7611 CAP AS-RAIN
6N-7611 CAP AS-RAIN -EXHAUST
FOR USE WITH 8-IN DIAMETER EXHAUST PIPE
AN ATTACHMENT
CAP AS-RAIN
7S-4411 CAP AS-RAIN
7S-4411 CAP AS-RAIN -EXHAUST PIPE
FOR USE WITH 6-INCH (152.4-MM) DIAMETER EXHAUST
AN ATTACHMENT
ELBOW GP-EXHAUST
128-4113 ELBOW GP-EXHAUST
128-4113 ELBOW GP-EXHAUST
WATERCOOLED, 8-INCH. O.D.
AN ATTACHMENT
ELBOW GP-EXHAUST
3N-7286 ELBOW GP-EXHAUST
3N-7286 ELBOW GP-EXHAUST
8 IN. OD. WATERCOOLED
AN ATTACHMENT
ELBOW GP-EXHAUST
6N-4432 ELBOW GP-EXHAUST
6N-4432 ELBOW GP-EXHAUST
203-MM (8-IN)
FOR USE WITH DIT ENGINE RATED AT 1800 OR 2100 RPM, OR DITA ENGINE RATED AT 1200 RPM
AN ATTACHMENT
ELBOW GP-EXHAUST
6N-6093 ELBOW GP-EXHAUST
6N-6093 ELBOW GP-EXHAUST
152-MM (6-INCH)
CANNOT BE USED WITH @@@@@128-4113@@@@@, EXHAUST RESTRICTOR
AN ATTACHMENT
ELBOW-EXHAUST
5L-7520 ELBOW-EXHAUST
5L-7520 ELBOW-EXHAUST
8-IN
AN ATTACHMENT
FITTING GP-EXHAUST
2W-7847 FITTING GP-EXHAUST
2W-7847 FITTING GP-EXHAUST -FLEXIBLE
152-MM (6-INCH)
AN ATTACHMENT
FITTING GP-EXHAUST
5L-6797 FITTING GP-EXHAUST
5L-6797 FITTING GP-EXHAUST
203 MM(8 INCH). VERTICAL
AN ATTACHMENT
FLANGE GP-EXHAUST
2W-7851 FLANGE GP-EXHAUST
2W-7851 FLANGE GP-EXHAUST
152-MM (6-INCH) DIAMETER PIPE
FOR USE WITH EXHAUST PIPE AND ELBOW
CANNOT BE USED WITH WATERCOOLED EXHAUST ELBOW
AN ATTACHMENT
FLANGE GP-EXHAUST
2W-7860 FLANGE GP-EXHAUST
2W-7860 FLANGE GP-EXHAUST
152-MM (6-INCH) DIAMETER PIPE
FOR USE WITH @@@@@ 2W-4072@@@@@
AN ATTACHMENT
FLANGE GP-EXHAUST
2W-7863 FLANGE GP-EXHAUST
2W-7863 FLANGE GP-EXHAUST
203-MM (8-INCH) DIAMETER PIPE
AN ATTACHMENT
FLANGE GP-EXHAUST
6L-3642 FLANGE GP-EXHAUST
6L-3642 FLANGE GP-EXHAUST
203 MM (8 INCH)
AN ATTACHMENT
PIPE GP-EXHAUST
4L-5801 PIPE GP-EXHAUST
4L-5801 PIPE GP-EXHAUST
152.4-MM (6-INCH)
AN ATTACHMENT
PIPE GP-EXHAUST
5L-3338 PIPE GP-EXHAUST
5L-3338 PIPE GP-EXHAUST
203-MM (8-IN) ID
AN ATTACHMENT

Information:

(For parts list, see above)

Engine News
New Aftercooler Core Has Stronger Construction And Corrosion Resistance
1979/10/03
New Adapters And O-Ring Seals Used In Aftercooler Group
1982/03/17
Specifications
Aftercooler
3408C and 3412C Marine Engines
Disassembly and Assembly
Aftercooler Core
3408C & 3412C MARINE ENGINES
Aftercooler
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Service Magazine
New Adapters And O-Ring Seals Used In Aftercooler Group{1063}
1982/03/08
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Caution: Do Not Change Orifice In Water Outlet Of Auxiliary Pump Group{1371}
1978/12/18
New Aftercooler Core Has Stronger Construction And Corrosion Resistance{1064}
1979/10/01
New Nut In Fresh And Raw Water Pumps Has More Corrosion Resistance{1371}
1989/02/13
Engine News
Steel Plates Are Now Used To Hold The Element In Position In The Panel-Type Air Cleaner Housing Assembly
1979/10/03
Stronger Braces Used Between Air Cleaner And Engine
1980/03/12
A Soot Filter Is Available For Use With Air Cleaners
1984/12/12
8N-4617 Air Cleaner Clamp Kit Available{1051}
1998/03/01
90° Elbow Added To Air Cleaner Group To Prevent Damage To The Air Filter Service Indicator
1978/12/13
Special Instruction
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL 4N-0015 AIR FILTERS NEED TO BE REMOVED FROM DEALERS PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL 4N-0015 AIR FILTERS NEED TO BE REMOVED FROM DEALERS PARTS STOCK
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Air Cleaners
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Air Cleaner Adapter
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL 4N-0015 AIR FILTERS NEED TO BE REMOVED FROM DEALERS PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL 4N-0015 AIR FILTERS NEED TO BE REMOVED FROM DEALERS PARTS STOCK
Service Letter-Asia
Reuse And Salvage Guidelines
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL 4N-0015 AIR FILTERS NEED TO BE REMOVED FROM DEALERS PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING ALL 4N-0015 AIR FILTERS NEED TO BE REMOVED FROM DEALERS PARTS STOCK
Disassembly and Assembly
Air Filter
3408C & 3412C MARINE ENGINES
Service Magazine
Stronger Braces Used Between Air Cleaner And Engine{1051}
1980/02/25
A Soot Filter Is Available For Use With Air Cleaners{1054}
1984/12/10
90° Elbow Added To Air Cleaner Group To Prevent Damage To The Air Filter Service Indicator{1051,7452}
1978/12/04
Steel Plates Are Now Used To Hold The Element In Position In The Panel-Type Air Cleaner Housing Assembly{1051,1054}
1979/10/01
Light Green Gasket Material On Secondary Air Filter Elements May Stick To Filter Housing{1054,1051}
1992/02/10
Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25
Truck Engine News
A Special Instruction, REHS1807 , "Installation Guide for Diesel Particulate Filters" is Available {1089, 1091}
2004/01/01
Engine News
A Soot Filter Is Available For Use With Air Cleaners
1984/12/12
New Water Cooled Exhaust Elbow Available {1059}
1996/01/17
Special Instruction
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Technical Information Bulletin
Exhaust Backpressure Limits For Marine Engines
Exhaust Backpressure Limits For Marine Engines
Specifications
Exhaust Pipes (With Dust Ejector)
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Exhaust Elbow
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Exhaust Adapter Group
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Reuse And Salvage Guidelines
Inspection of Diesel Particulate Filters (DPF), Diesel Oxidation Catalysts (DOC) and CRS Bodies {108F, 1091}
Inspection of Diesel Particulate Filters (DPF), Diesel Oxidation Catalysts (DOC) and CRS Bodies {108F, 1091}
Thermal Spray Procedures for Exhaust Manifold (I.D. & O.D.){0679, 1059}
Thermal Spray Procedures for Exhaust Manifold (I.D. & O.D.){0679, 1059}
Service Magazine
Exhaust Manifold And Air Lines Changes Prevent Broken Studs And Exhaust Leaks {1059,1061}
1981/09/14
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
A Soot Filter Is Available For Use With Air Cleaners{1054}
1984/12/10
Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25
Engine News
Steel Plates Are Now Used To Hold The Element In Position In The Panel-Type Air Cleaner Housing Assembly
1979/10/03
Stronger Braces Used Between Air Cleaner And Engine
1980/03/12
A Soot Filter Is Available For Use With Air Cleaners
1984/12/12
8N-4617 Air Cleaner Clamp Kit Available{1051}
1998/03/01
90° Elbow Added To Air Cleaner Group To Prevent Damage To The Air Filter Service Indicator
1978/12/13
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Disassembly and Assembly
Air Filter
3408C & 3412C MARINE ENGINES
Service Magazine
Stronger Braces Used Between Air Cleaner And Engine{1051}
1980/02/25
Carbon Build-Up In Combustion And Inlet Areas{1058,1101,1105,1214,1104}
1982/03/22
A Soot Filter Is Available For Use With Air Cleaners{1054}
1984/12/10
90° Elbow Added To Air Cleaner Group To Prevent Damage To The Air Filter Service Indicator{1051,7452}
1978/12/04
Steel Plates Are Now Used To Hold The Element In Position In The Panel-Type Air Cleaner Housing Assembly{1051,1054}
1979/10/01
Light Green Gasket Material On Secondary Air Filter Elements May Stick To Filter Housing{1054,1051}
1992/02/10
Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Engine News
An Improved Exhaust Gasket Is Available {1071, 7555}
2006/10/16
Service Magazine
Exhaust Manifold And Air Lines Changes Prevent Broken Studs And Exhaust Leaks {1059,1061}
1981/09/14
Carbon Build-Up In Combustion And Inlet Areas{1058,1101,1105,1214,1104}
1982/03/22
Engine News
Two New Exhaust Manifolds Available For Replacement Of Single Rear Manifold To Prevent Broken Studs
1981/03/04
Larger Studs Can Be Used With Rear Exhaust Manifolds
1982/06/16
Changes To Exhaust Manifolds Help Prevent Broken Studs
1985/04/01
Maintenance Procedure Extends Service Life Of Exhaust Manifold Studs
1989/01/01
New Exhaust Manifold Stud Available
1990/02/01
Update Information For Exhaust Manifolds
1991/01/01
New Thicker Exhaust Manifold Gasket Used{1059}
1995/09/01
Stronger Exhaust Manifold Gasket Now Used
1978/03/01
A New Exhaust Gasket is Now Available {1059}
2006/03/20
New Water Cooled Exhaust Manifold {1059}
2006/04/24
Specifications
Exhaust Manifold - Water Cooled
3408C and 3412C Marine Engines
Reuse And Salvage Guidelines
Thermal Spray Procedures for Exhaust Manifold (I.D. & O.D.){0679, 1059}
Thermal Spray Procedures for Exhaust Manifold (I.D. & O.D.){0679, 1059}
Disassembly and Assembly
Exhaust Manifold (rear)
3408C & 3412C MARINE ENGINES
Exhaust Manifold (Water Cooled)
3408C & 3412C MARINE ENGINES
Exhaust Manifold (Industrial Engine)
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Exhaust Manifold (Water Cooled)
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Service Magazine
Two New Exhaust Manifolds Available For Replacement Of Single Rear Manifold To Prevent Broken Studs{1059}
1981/03/02
Exhaust Manifold And Air Lines Changes Prevent Broken Studs And Exhaust Leaks {1059,1061}
1981/09/14
Larger Studs Can Be Used With Rear Exhaust Manifolds{1059}
1982/05/17
Changes To Exhaust Manifolds Help Prevent Broken Studs{1059}
1985/04/08
Stronger Exhaust Manifold Gasket Now Used{1059}
1978/02/27
Maintenance Procedure Extends Service Life Of Exhaust Manifold Studs{1050}
1988/12/12
New Manifold Assembly Gives More Room For The Lifting Eye{1059}
1979/03/12
New Exhaust Manifold Stud Available{1059}
1990/02/12
Update Information For Exhaust Manifolds{1059}
1990/12/24
Use 165-4638 Guide To Install Exhaust Manifold {1059,0701,0702}
1999/08/30
Carbon Build-Up In Combustion And Inlet Areas{1058,1101,1105,1214,1104}
1982/03/22
Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Steel Plates Are Now Used To Hold The Element In Position In The Panel-Type Air Cleaner Housing Assembly
1979/10/03
New Aftercooler Core Has Stronger Construction And Corrosion Resistance
1979/10/03
Stronger Braces Used Between Air Cleaner And Engine
1980/03/12
New Adapters And O-Ring Seals Used In Aftercooler Group
1982/03/17
Maintenance Procedure Extends Service Life Of Exhaust Manifold Studs
1989/01/01
Adapter For Disassembly And Assembly Of Turbocharger Cartridge
1977/01/28
Clip Now Used To Hold Coolant Line For The Turbocharger
1977/03/15
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Stronger Exhaust Manifold Gasket Now Used
1978/03/01
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
90° Elbow Added To Air Cleaner Group To Prevent Damage To The Air Filter Service Indicator
1978/12/13
Service Magazine
Stronger Braces Used Between Air Cleaner And Engine{1051}
1980/02/25
Two New Exhaust Manifolds Available For Replacement Of Single Rear Manifold To Prevent Broken Studs{1059}
1981/03/02
New Adapters And O-Ring Seals Used In Aftercooler Group{1063}
1982/03/08
Carbon Build-Up In Combustion And Inlet Areas{1058,1101,1105,1214,1104}
1982/03/22
Larger Studs Can Be Used With Rear Exhaust Manifolds{1059}
1982/05/17
Stronger Turbine Wheel Used In Turbocharger Shaft And Wheel Assemblies{1053,1052}
1982/06/14
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
A Soot Filter Is Available For Use With Air Cleaners{1054}
1984/12/10
Changes To Exhaust Manifolds Help Prevent Broken Studs{1059}
1985/04/08
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Adapter For Disassembly And Assembly Of Turbocharger Cartridge{0620,1053}
1977/01/24
Clip Now Used To Hold Coolant Line For The Turbocharger{1052,1380}
1977/02/28
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Stronger Exhaust Manifold Gasket Now Used{1059}
1978/02/27
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Maintenance Procedure Extends Service Life Of Exhaust Manifold Studs{1050}
1988/12/12
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
Steel Plates Are Now Used To Hold The Element In Position In The Panel-Type Air Cleaner Housing Assembly{1051,1054}
1979/10/01
New Aftercooler Core Has Stronger Construction And Corrosion Resistance{1064}
1979/10/01
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Tightening Procedure For Turbocharger Compressor Nut{1052,1060}
1989/09/18
New Exhaust Manifold Stud Available{1059}
1990/02/12
Update Information For Exhaust Manifolds{1059}
1990/12/24
Light Green Gasket Material On Secondary Air Filter Elements May Stick To Filter Housing{1054,1051}
1992/02/10
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Special Instruction
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Specifications
Muffler Groups
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Service Magazine
Exhaust Manifold And Air Lines Changes Prevent Broken Studs And Exhaust Leaks {1059,1061}
1981/09/14
Specifications
Air Shutoff Group
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Engine News
Change 6V3060 EGR Testers To LES Testers
1983/04/27
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
Service Magazine
Thermocouple Assembly (Exhaust) Measures Engine Exhaust Temperatures {0701, 0776, 0781}
2004/03/29
Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Stronger Turbine Wheel Used In Turbocharger Shaft And Wheel Assemblies
1982/08/25
Use Of 9S3265 Retaining Compound On AiResearch Turbocharger Compressor Wheel Retainer Nuts
1983/04/27
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Oversize Bearings For Turbocharger Center Housings Available
1987/04/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
Tightening Procedure For Turbocharger Compressor Nut
1989/09/01
"Off-Size" Bearing Kits Available
1991/10/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
Adapter For Disassembly And Assembly Of Turbocharger Cartridge
1977/01/28
Clip Now Used To Hold Coolant Line For The Turbocharger
1977/03/15
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2004/04/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
New Gaskets for the Turbocharger Oil Lines are Now Used {1052, 1307}
2005/07/04
Packaging the Turbocharger {1052}
2007/02/26
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W727 Turbocharger Cartridge Repair Kit{1053}
2W727 Turbocharger Cartridge Repair Kit{1053}
2W715 Turbocharger Cartridge Repair Kit{1053}
2W715 Turbocharger Cartridge Repair Kit{1053}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Turbocharger
3408B and 3408C Industrial and Marine Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Turbocharger
3408C & 3412C MARINE ENGINES
Turbocharger (Industrial Engine)
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Turbocharger (T12)
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Turbocharger (TV72 & TW72)
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Turbocharger (TV81 & TW81)
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Turbocharger (F552)
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Turbocharger (4MF And 4MFW)
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Turbocharger (S4A)
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Turbocharger (Marine Engine)
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Service Magazine
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
Exhaust Manifold And Air Lines Changes Prevent Broken Studs And Exhaust Leaks {1059,1061}
1981/09/14
Carbon Build-Up In Combustion And Inlet Areas{1058,1101,1105,1214,1104}
1982/03/22
Stronger Turbine Wheel Used In Turbocharger Shaft And Wheel Assemblies{1053,1052}
1982/06/14
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Adapter For Disassembly And Assembly Of Turbocharger Cartridge{0620,1053}
1977/01/24
Clip Now Used To Hold Coolant Line For The Turbocharger{1052,1380}
1977/02/28
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Tightening Procedure For Turbocharger Compressor Nut{1052,1060}
1989/09/18
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket{1157,1307}
1992/09/21
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Carbon Build-Up In Combustion And Inlet Areas{1058,1101,1105,1214,1104}
1982/03/22
Engine News
A Soot Filter Is Available For Use With Air Cleaners
1984/12/12
Special Instruction
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}
Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}
Procedure to Install an Aftertreatment (Mechanical) Kit on All Caterpillar<SUP>&reg;</SUP> Diesel Engines {108D, 108U, 1408, 1907, 1921, 1923, 7553}
Procedure to Install an Aftertreatment (Mechanical) Kit on All Caterpillar® Diesel Engines {108D, 108U, 1408, 1907, 1921, 1923, 7553}
Service Magazine
A Soot Filter Is Available For Use With Air Cleaners{1054}
1984/12/10
Specifications
Exhaust Pipes (With Dust Ejector)
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Exhaust Elbow
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Exhaust Adapter Group
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Service Magazine
Exhaust Manifold And Air Lines Changes Prevent Broken Studs And Exhaust Leaks {1059,1061}
1981/09/14

Truck sale:

1986 CAT 3408B
USD $34,000 
1986 CAT 3408B

Empire Power Systems
PHOENIX, Arizona
CAT 3408B
USD $9,228 
CAT 3408B

The Dutch Engine and Pump Company BV
Ridderkerk, The Netherlands
CAT 3408B
Call 
CAT 3408B

Coastal Power & Equipment
Texas
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.