AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4P-1890 PISTON & ROD GP S/N 99U6825-7598 14.3:1 RATIO FOR USE WITH @@@@@442-5359@@@@@ 3408 MARINE ENGINE


BASIC ENGINE
PISTON & ROD GP
POWER TAKE-OFF GP
PULLEY GP
PISTON & ROD GP

MARINE ENGINE 3408 MARINE ENGINE 99U
 3408B Marine Engine 99U04604-07598 SEBP1490 3408 99U   (1976)

BASIC ENGINE

PISTON & ROD GP
442-5359 KIT-CYLINDER PACK
PISTON & ROD GP
2W-9054 PISTON & ROD GP
PISTON & ROD GP
4P-1890 PISTON & ROD GP
PISTON & ROD GP
7W-7665 PISTON & ROD GP
PISTON GP
2W-9053 PISTON GP
PISTON GP
7W-7756 PISTON GP
RING GP-PISTON
1W-8922 RING GP-PISTON
RING GP-PISTON
2W-1184 RING GP-PISTON
RING GP-PISTON
7C-8936 RING GP-PISTON
RING GP-PISTON
8N-0822 RING GP-PISTON
 

#SEBP14900110
 

4P-1890: PISTON & ROD GP

4P-1890 PISTON & ROD GP
S/N 99U6825-7598
14.3:1 RATIO
FOR USE WITH @@@@@442-5359@@@@@
i00374225 SEBP1490
4P1890 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 524-5564 [1] PIN-PISTON  
2. 7E-5665 N [2] RETAINER-PIN  
3. 160-8178 [1] ROD AS-CONNECTING  
3A. 4P-8495 N [1] BUSHING  
3B. 8L-3441 [2] NUT (9/16-18-THD)  
3C. 6N-8942 [2] BOLT-CONNECTING ROD  
4. 328-5574 H [1] BEARING-CONNECTING ROD (STANDARD)  
  4W-5702 ABJ BEARING-CONNECTING ROD (0.635-MM US)  
  4W-5703 ABL BEARING-CONNECTING ROD (1.27-MM US)  
5. 9Y-7212 N [1] BODY AS-PISTON  
6. 346-3340 N [1] RING-PISTON (TOP)  
7. 2P-2817 N [1] RING-PISTON (INTERMEDIATE)  
8. 7N-7078 N [1] RING-PISTON (OIL CONTROL)  
   
    AVAILABLE REPAIR KIT(S):
  9Y-6188 ABHPS KIT-ROD BEARING (STANDARD)  
  9Y-6189 ABJPS KIT-ROD BEARING (0.635-MM US)  
  9Y-6190 ABLPS KIT-ROD BEARING (1.27-MM US)  
  442-5359 ABN [1] KIT-CYLINDER PACK  
    (INCLUDES RINGS, BUSHING, PISTON BODY ASSEMBLY, RETAINER, LINER, SINGLE CYLINDER LINER GASKET KIT)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  H   KIT MARKED H INCLUDES SIX OF PART MARKED H
  J   KIT MARKED J INCLUDES SIX OF PART MARKED J
  L   KIT MARKED L INCLUDES OF PART MARKED L
  N   KIT MARKED N SERVICES PART(S) MARKED N
  P   QTY OF 2 KITS REQUIRED FOR 3412 ENGINE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  S   NOT FOR USE WITH 3408 ENGINE
 

#SEBP14900111
 

7W-7665: PISTON & ROD GP

7W-7665 PISTON & ROD GP
S/N 99U4724-6172
15.6:1 RATIO
i00415762 SEBP1490
7W7665 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-1608 [1] PIN-PISTON  
2. 8N-7295 [2] RETAINER-PIN  
3. 8N-1728 [1] ROD AS-CONNECTING  
  8N-2018 [1] BUSHING  
4. 6N-8942 [2] BOLT-CONNECTING ROD  
  8L-3441 [2] NUT (9/16-18-THD)  
5. 1W-7524 H [1] BEARING (STANDARD)  
  4W-5702 ABJ [1] BEARING-CONNECTING ROD (0.635-MM US)  
  4W-5703 ABL [1] BEARING-CONNECTING ROD (1.27-MM US)  
6. 7W-7756 Y [1] PISTON GP  
   
    AVAILABLE REPAIR KIT(S):
  9Y-6188 ABHPS KIT-ROD BEARING (STANDARD)  
  9Y-6189 ABJPS KIT-ROD BEARING (0.635-MM US)  
  9Y-6190 ABLPS KIT-ROD BEARING (1.27-MM US)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  H   KIT MARKED H INCLUDES SIX OF PART MARKED H
  J   KIT MARKED J INCLUDES SIX OF PART MARKED J
  L   KIT MARKED L INCLUDES SIX OF PART MARKED L
  P   QTY OF 2 KITS REQUIRED FOR 3412 ENGINE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  S   NOT FOR USE WITH 3408 ENGINE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14900112
 

2W-9053: PISTON GP

2W-9053 PISTON GP
S/N 99U4604-6824
PART OF 2W-9054 PISTON & ROD GP
FOR USE WITH @@@@@442-5359@@@@@
i00107875 SEBP1490
2W9053 PISTON GP Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-0865 [1] PISTON AS  
    -OR-
  9Y-7212 J [1] BODY AS-PISTON  
2. 1W-9460 [1] RING-PISTON (TOP)  
3. 2P-2817 [1] RING-PISTON (INTERMEDIATE)  
4. 7N-7078 [1] RING-PISTON (OIL CONTROL)  
  1W-8922 FA [1] RING GP-PISTON (STANDARD)  
    (CONSISTS OF A COMPLETE SET OF RINGS FOR ONE PISTON)
   
    AVAILABLE REPAIR KIT(S):
  442-5359 ABJ [1] KIT-CYLINDER PACK  
    (INCLUDES RINGS, BUSHING, PISTON BODY ASSEMBLY, RETAINER, LINER, SINGLE CYLINDER LINER GASKET KIT)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  F   NOT SHOWN
  J   KIT MARKED J SERVICES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP14900113
 

7W-7756: PISTON GP

7W-7756 PISTON GP
S/N 99U4724-6172
PART OF 7W-7665 PISTON & ROD GP
i00415776 SEBP1490
7W7756 PISTON GP Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-0865 [1] PISTON AS  
2. 2W-1521 [1] RING-PISTON (TOP)(TOP)  
3. 2P-2817 [1] RING-PISTON (INTERMEDIATE)(INTERMEDIATE)  
4. 7N-7078 [1] RING-PISTON (OIL CONTROL)(OIL)  
  1W-8922 FA [1] RING GP-PISTON (STANDARD)  
    (CONSISTS OF A COMPLETE SET OF
    RINGS FOR ONE PISTON)
  A   NOT PART OF THIS GROUP
  F   NOT SHOWN
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP14900114
 

4W-9829: POWER TAKE-OFF GP

4W-9829 POWER TAKE-OFF GP
S/N 99U4650-7598
PROVIDES SPREAD BEARING SINGLE PLATE FRONT ENCLOSED CLUTCH
CANNOT BE USED WITH HYDRAULIC PUMP DRIVE ADAPTER OR 2100 RPM ENGINE
AN ATTACHMENT
i00380771 SEBP1490
4W9829 POWER TAKE-OFF GP Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5822 [1] ADAPTER  
2. 0S-1594 [12] BOLT (3/8-16X1-IN)  
3. 5N-7329 Y [1] CLUTCH GP  
4. 5N-6958 [1] CHANNEL  
5. 0S-1566 [2] BOLT (5/8-11X1.5-IN)  
  5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
6. 0S-1591 [12] BOLT (3/8-16X1.5-IN)  
7. 0S-1573 [8] BOLT (1/2-13X4-IN)  
8. 4W-8688 [2] DOWEL-THREADED (5/16-18-THD)  
9. 4W-8689 [2] DOWEL-BUSHING  
10. 9F-6641 [2] BOLT (5/16-18X1.25-IN)  
11. 0S-1585 [1] BOLT (1/2-13X1.5-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP14900115
 

4W-9830: POWER TAKE-OFF GP

4W-9830 POWER TAKE-OFF GP
S/N 99U4650-7598
CANNOT BE USED WITH HYDRAULIC PUMP DRIVE ADAPTER OR 2100 RPM ENGINE
AN ATTACHMENT
i00380772 SEBP1490
4W9830 POWER TAKE-OFF GP Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5822 [1] ADAPTER  
2. 0S-1594 [12] BOLT (3/8-16X1-IN)  
    -OR-
  0S-1591 C [12] BOLT (3/8-16X1.5-IN)  
3. 5N-7330 Y [1] CLUTCH GP  
4. 5N-6958 [1] CHANNEL  
5. 0S-1566 [2] BOLT (5/8-11X1.5-IN)  
  5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
6. 0L-1143 [8] BOLT (3/8-16X2.5-IN)  
7. 0S-1573 [8] BOLT (1/2-13X4-IN)  
8. 4W-8688 [2] DOWEL-THREADED (5/16-18-THD)  
9. 4W-8689 [2] DOWEL-BUSHING  
10. 9F-6641 [2] BOLT (5/16-18X1.25-IN)  
11. 0S-1585 [1] BOLT (1/2-13X1.5-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14900116
 

5N-7399: POWER TAKE-OFF GP

5N-7399 POWER TAKE-OFF GP
S/N 99U4604-4649
AN ATTACHMENT
i00387209 SEBP1490
5N7399 POWER TAKE-OFF GP Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5822 [1] ADAPTER  
2. 4W-8688 [2] DOWEL-THREADED (5/16-18-THD)  
3. 4W-8689 [2] DOWEL-BUSHING  
4. 9F-6641 [2] BOLT (5/16-18X1.25-IN)  
5. 0S-1594 [12] BOLT (3/8-16X1-IN)  
6. 5N-7329 Y [1] CLUTCH GP  
7. 0S-1591 [8] BOLT (3/8-16X1.5-IN)  
8. 0S-1566 [2] BOLT (5/8-11X1.5-IN)  
9. 5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
10. 5N-6958 [1] CHANNEL  
11. 0S-1573 [8] BOLT (1/2-13X4-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP14900117
 

5N-7400: POWER TAKE-OFF GP

5N-7400 POWER TAKE-OFF GP
S/N 99U4604-4649
2 PLATE CLUTCH
AN ATTACHMENT
i00387212 SEBP1490
5N7400 POWER TAKE-OFF GP Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5N-7751 [1] ADAPTER AS  
  4N-0683 [2] DOWEL  
2. 0S-1594 [12] BOLT (3/8-16X1-IN)  
3. 5N-7330 Y [1] CLUTCH GP  
4. 0L-1143 [8] BOLT (3/8-16X2.5-IN)  
5. 0S-1566 [2] BOLT (5/8-11X1.5-IN)  
  5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
6. 5N-6958 [1] CHANNEL  
7. 0S-1573 [8] BOLT (1/2-13X4-IN)  
8. 1A-8063 [2] BOLT (3/4-10X2.5-IN)  
  5P-8248 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP14900118
 

6N-4581: PULLEY GP-CRANKSHAFT

6N-4581 PULLEY GP-CRANKSHAFT
CANNOT BE USED WITH FRONT ENCLOSED CLUTCH
AN ATTACHMENT
i00974059 SEBP1490
6N4581 PULLEY GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-4580 [1] PULLEY (2-GROOVE)  
2. 0L-1351 [8] BOLT (3/8-16X0.875-IN)  
 

#SEBP14900119
 

1W-8922: RING GP-PISTON

1W-8922 RING GP-PISTON
FIELD INSTALLATION
i01323194 SEBP1490
1W8922 RING GP-PISTON Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 134-3761 [1] RING-PISTON (TOP)  
2. 2P-2817 [1] RING-PISTON (INTERMEDIATE)  
3. 7N-7078 [1] RING-PISTON (OIL CONTROL)  
 

Information:

Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Reference List Of Pistons Used With The Different Types Of Connecting Rods
1980/09/10
New Connecting Rod And Main Bearings Have A Thicker Coating (Layer) Of Lead-Tin Overlay
1981/01/21
Later Pistons Have A Smaller Number Of Drain Holes In Oil Ring Groove
1981/03/04
6V3197 Spacer, 6V3041 Tool Group Available For Use During Removal And Installation Of Piston Pin Bearings
1981/04/22
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods
1981/07/15
New Piston Pin Retainer Used
1982/02/10
Carbon Build-Up In Combustion And Inlet Areas
1982/04/07
Use Correct Part Numbers For Main And Connecting Rod Bearings
1982/05/12
Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/11/10
New Piston Group Has A Thicker Top Ring
1982/12/15
Pistons With Thicker Top Rings Must Be Used In Correct Applications
1983/04/27
Parts Service Information For Pistons, Connecting Rods, Piston Pins And Rings
1983/09/14
Remanufactured Connecting Rod Assemblies
1984/02/22
Be Sure Correct Piston Rings Are Used On 3400 Series Engines
1985/05/01
Effects Of Liner Wear In Engines Using Plasma Coated Top Rings
1985/12/01
Increase Piston Reuse With Keystone Piston Ring Gauge Group
1986/07/01
Check Connecting Rods After Engine Failures Involving Hydraulic Lock
1986/12/01
Main And Connecting Rod Bearing Part Numbers
1987/01/01
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method
1987/06/01
3400 Engine Major Component Performance Guide Available
1987/07/01
Testing Connecting Rod Eye Bushings When Overhauling Engines
1987/07/01
New Connecting Rod Bearing Used
1989/09/01
Plasma Top Piston Rings Replace Chrome Rings
1989/09/01
New Pistons Used
1990/08/01
Service Tips For Piston Cooling Jets (Tubes)
1990/12/01
Installation Of Zinc Rods In Caterpillar Marine Engines
1991/01/01
New Piston Pin Retainer Used
1991/10/01
New Cylinder Kits Available
1992/04/01
Connecting Rod Bearing Eliminates The Need For Mid-Life Connecting Rod Bearing Roll-In
1992/08/01
Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/11/01
Be Sure Correct Piston Cooling Jets Are Installed{1331}
1994/12/01
Improved Main And Connecting Rod Bearings Have Aluminum Alloy With More Strength
1977/01/28
New Piston Pin Bearing Used In Connecting Rod Assembly
1977/04/22
Stronger Piston Is Used; Piston And Connecting Rod Are Tapered In Area Of Piston Pin
1977/09/28
Stronger Piston And Connecting Rod Are Tapered In Area Of Piston Pin
1978/03/01
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
New Guidelines for Inspecting Pistons {1214}
2006/01/02
Usability of Main Bearings and Camshaft Bearings {1202, 1203, 1218, 1219}
2008/11/24
A New Connecting Rod Bearing is Available for Certain Commercial Engines {1219, 1225}
2012/08/15
A New Connecting Rod Bearing is Available {1218, 1219, 1225}
2009/02/09
An Improved Top Piston Ring Is Now Used on Aluminum Pistons in Certain 3406, 3408, and 3412 Engines {1215}
2012/04/24
Special Instruction
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
3400 Series Engines{1215}
3400 Series Engines{1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Service Letter-NACD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Australia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-CFEL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-CSARL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Americas
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Brazil
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Truck/Ag/Marine
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Technical Information Bulletin
Connecting Rod Bearings
Connecting Rod Bearings
Connecting Rod Bearings
Connecting Rod Bearings
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Specifications
Connecting Rod
3408B and 3408C Industrial and Marine Engines
Piston and Rings
3408C and 3412C Marine Engines
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Service Letter-China
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Asia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Information Release Memo
PRODUCT LINE ADDITIONS: REMANUFACTURED SHORT AND LONG BLOCKS FOR VARIOUS APPLICATIONS
PRODUCT LINE ADDITIONS: REMANUFACTURED SHORT AND LONG BLOCKS FOR VARIOUS APPLICATIONS
Service Letter-APD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Disassembly and Assembly
Connecting Rod Bearings
3408C & 3412C MARINE ENGINES
Pistons
3408C & 3412C MARINE ENGINES
Connecting Rod Bearings
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Pistons And Connecting Rods
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Service Magazine
Reference List Of Pistons Used With The Different Types Of Connecting Rods{1214,1218}
1980/09/15
New Connecting Rod And Main Bearings Have A Thicker Coating (Layer) Of Lead-Tin Overlay{1230,1219,1203}
1981/01/19
Later Pistons Have A Smaller Number Of Drain Holes In Oil Ring Groove{1214,1213}
1981/02/23
6V3197 Spacer, 6V3041 Tool Group Available For Use During Removal and Installation Of Piston Pin Bearings{0622,1219,1218,1214}
1981/03/30
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
New Cylinder Liners And O-Ring Seals Give Longer Seal Life{1216,1201,1213,1227}
1981/12/14
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
New Piston Pin Retainer Used{1214,1225}
1982/02/08
Carbon Build-Up In Combustion And Inlet Areas{1058,1101,1105,1214,1104}
1982/03/22
Use Correct Part Numbers For Main And Connecting Rod Bearings{1230,1203,1219}
1982/04/12
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
New Piston Group Has A Thicker Top Ring{1215,1214,1213,1225,1226,1227}
1982/12/13
New Connecting Rod Bearings Used{1219,1230}
1983/04/04
Pistons With Thicker Top Rings Must Be Used In Correct Applications {1214,1215}
1983/04/18
Reuse Of Engine Bearings{1230}
1983/05/16
Parts Service Information For Pistons, Connecting Rods, Piston Pins And Rings{1214,1225,1215,1218}
1983/09/12
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Connecting Rod Assemblies{1218}
1984/01/23
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Be Sure Correct Piston Rings Are Used On 3400 Series Engines{1215,1214}
1985/05/06
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Effects Of Liner Wear In Engines Using Plasma Coated Top Rings{1215,1216,7770}
1985/11/11
Two Different Piston Oil Ring Designs Used{1215}
1985/11/11
Service Reminders For 3400 Family Of Diesel Engines{1204,1214,1331}
1986/05/05
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Improved Main And Connecting Rod Bearings Have Aluminum Alloy With More Strength{1230}
1977/01/17
New Piston Pin Bearing Used In Connecting Rod Assembly{1218}
1977/04/25
Stronger Piston Is Used; Piston And Connecting Rod Are Tapered In Area Of Piston Pin{1213,1214,1218}
1977/09/19
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Testing Connecting Rod Eye Bushings When Overhauling Engines{1218}
1987/07/06
New Piston Cooling Jets Used {1213,1214}
1987/09/14
Stronger Piston And Connecting Rod Are Tapered In Area Of Piston Pin{1213,1214,1218}
1978/03/06
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Connecting Rod Bearing Used{0372,1203,1219}
1989/08/21
Plasma Top Piston Rings Replace Chrome Rings{1215,1214}
1989/09/11
New Pistons Used{1225,1214}
1990/07/30
Service Tips For Piston Cooling Jets (Tubes){1331}
1990/11/26
Installation Of Zinc Rods In Caterpillar Marine Engines{1350,1388}
1990/12/24
Cylinder Kits Not Recommended For Use In 3400 Family of Marine Engines And D8N Tractors{1214}
1991/05/20
New Piston Pin Retainer Used{1225}
1991/10/14
New Cylinder Kits Available{1213}
1992/04/13
Connecting Rod Bearing Eliminates The Need For Mid-Life Connecting Rod Bearing Roll-In{1219,1202}
1992/08/31
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/10/31

Caterpillar Parts SIS Catalog 3408 :

PISTON & ROD GP
2W-9054 PISTON & ROD GP
4W-1783 PAN GP-OIL
PAN GP-OIL
4W-1540 PAN GP-OIL
PAN GP-OIL
4N-1733 PAN GP-OIL
MOUNTING GP-TRANSMISSION
4W-4906 MOUNTING GP-TRANSMISSION
MOUNTING GP-HYD PUMP DRIVE
5N-2670 MOUNTING GP-HYD PUMP DRIVE
MOUNTING GP-HYD PUMP DRIVE
4W-9827 MOUNTING GP-HYD PUMP DRIVE
MOUNTING GP-ALTERNATOR
8N-8001 MOUNTING GP-ALTERNATOR
PISTON & ROD GP
7W-7665 PISTON & ROD GP
PISTON GP
2W-9053 PISTON GP
PISTON GP
7W-7756 PISTON GP
POWER TAKE-OFF GP
4W-9829 POWER TAKE-OFF GP
POWER TAKE-OFF GP
4W-9830 POWER TAKE-OFF GP
POWER TAKE-OFF GP
5N-7399 POWER TAKE-OFF GP
POWER TAKE-OFF GP
5N-7400 POWER TAKE-OFF GP
PULLEY GP-CRANKSHAFT
6N-4581 PULLEY GP-CRANKSHAFT

Truck sale:

Caterpillar 3408 IND, Construction
45,000 
Caterpillar 3408 IND, Construction
- Industrial engines
LOUISIANA CAT POWER SYSTEMS
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.