AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4P-9351 KIT-ENGINE PARTS -MARINE CLASSIFICATION SOCIETY S/N 99U6973-7598 FOR USE WITH ENGINES EQUIPPED WITH DOUBLE WALL FUEL LINES AN ATTACHMENT 3408


BASIC ENGINE
PARTS GP-MISCELLANEOUS
SERVICE EQUIPMENT AND SUPPLIES
GASKET & SEAL KITS

MARINE ENGINE 3408 MARINE ENGINE 99U
 3408B Marine Engine 99U04604-07598 SEBP1490 3408 99U   (1976)

BASIC ENGINE

PARTS GP-MISCELLANEOUS
4P-9350 KIT-ENGINE PARTS
4P-9351 KIT-ENGINE PARTS
5N-9004 KIT-ENGINE PARTS
7C-2947 KIT-ENGINE PARTS
7W-4410 KIT-ENGINE PARTS
 

#SEBP14900690
 

4P-9351: KIT-ENGINE PARTS

4P-9351 KIT-ENGINE PARTS -MARINE CLASSIFICATION SOCIETY
S/N 99U6973-7598
FOR USE WITH ENGINES EQUIPPED WITH DOUBLE WALL FUEL LINES
AN ATTACHMENT
i02423250 SEBP1490
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7W-2225 Y [1] CYLINDER HEAD AS  
  7W-0561 Y [1] PUMP GP-FUEL INJECTION  
  4W-7637 Y [1] TURBOCHARGER GP  
  9L-5854 [1] BAND-FILLER (130.2-MM ID)  
  328-5574 [2] BEARING-CONNECTING ROD (STANDARD)  
  4W-5702 AB BEARING-CONNECTING ROD (0.635-MM US)  
  4W-5703 AB BEARING-CONNECTING ROD (1.27-MM US)  
  211-0592 [1] BEARING-MAIN (STANDARD)  
  9Y-7212 [1] BODY AS-PISTON  
  3P-1323 [2] BOLT-BEARING CAP (7/8-14X7.75-IN)  
  4N-6658 [1] BUSHING (1.3-IN WIDE)  
  7W-8301 [3] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  5H-1504 WASHER-HARD (20X33.5X5-MM THK)  
  124-1855 BOLT-12 POINT HEAD (3/4-16X7.638-IN)  
  9L-6924 [1] GASKET  
  9F-7450 [1] GASKET  
  7C-0307 [7] GASKET  
  4H-9541 [1] GASKET  
  283-5666 [1] GASKET-CYLINDER HEAD  
  129-9452 [4] GASKET-EXHAUST MANIFOLD  
  1S-4810 [1] GASKET-OIL DRAIN  
  4N-6340 [1] GASKET-OIL PAN  
  1S-6595 [1] GASKET-OIL SUPPLY  
  6N-9133 [1] GASKET-PLATE  
  4N-1156 [2] GASKET-REGULATOR COVER  
  4N-1918 [1] GASKET-WOUND  
  101-3374 [1] GEAR (86-TEETH)  
  271-5661 [1] GEAR AS-IDLER  
  7N-7591 [1] GEAR-CRANKSHAFT (80-TEETH)  
  173-7188 [6] GUIDE-VALVE  
  4W-7019 [9] INJECTOR GP-FUEL  
    (EACH INCLUDES)
  9L-9098 [1] SEAL-CARBON STOP  
  7W-4482 [1] WASHER (17.14X9.76X3.18-MM THK)  
  9X-2836 [1] SCREW-BUTTON HEAD  
  114-3362 [1] SEAL-O-RING  
  1W-5283 [4] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  7C-5353 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  7C-5354 AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
  4N-5893 [2] INSERT-VALVE SEAT (INLET)(STANDARD)  
  7C-7602 AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  7C-7603 AB INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  7C-7604 AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  7C-7605 AB INSERT-VALVE SEAT (0.76-MM OS, INLET)  
  1B-8705 [1] KEY-WOODRUFF  
  140-7682 [1] KIT-GASKET (TURBOCHARGER MOUNTING)  
  1W-6314 [1] LINE AS-FUEL (CYL NO. 4)  
  1W-6315 [1] LINE AS-FUEL (CYL NO. 5)  
  1W-6311 [1] LINE AS-FUEL INJECTION (CYL NO. 1)  
  1W-6312 [1] LINE AS-FUEL INJECTION (CYL NO. 2)  
  1W-6313 [1] LINE AS-FUEL INJECTION (CYL NO. 3)  
  1W-6316 [1] LINE AS-FUEL INJECTION (CYL NO. 6)  
  1W-6317 [1] LINE AS-FUEL INJECTION (CYL NO. 7)  
  1W-6318 [1] LINE AS-FUEL INJECTION (CYL NO. 8)  
  7C-5398 [1] LINE AS-FUEL INJECTION  
  197-9322 [1] LINER-CYLINDER BLOCK  
  2A-4429 [12] LOCK-RETAINER  
  2N-2766 [4] LOCKNUT (3/8-16-THD)  
  8N-1608 [1] PIN-PISTON  
  253-1752 [2] PLATE-THRUST  
  7W-2315 [9] RETAINER  
  7E-5665 [2] RETAINER-PIN  
  134-3761 [2] RING-PISTON (TOP)  
  2P-2817 [2] RING-PISTON (INTERMEDIATE)  
  7N-7078 [2] RING-PISTON (OIL CONTROL)  
  160-8178 [1] ROD AS-CONNECTING  
  6N-7175 [6] ROTOCOIL AS  
    (EACH INCLUDES)
  6N-7174 [1] SHIELD-OIL  
  5P-5678 D SEAL (4-M)  
  3E-6772 [16] SEAL (WATER)  
  9L-9098 [4] SEAL-CARBON STOP  
  110-2220 [1] SEAL-LINER  
  142-7072 [1] SEAL-LINER  
  3S-9643 [1] SEAL-LIP TYPE (WATER TEMPERATURE REGULATOR)  
  142-6217 [1] SEAL-O-RING  
  5P-8119 [9] SEAL-O-RING  
    (FUEL SYSTEM PARTS)
  114-2687 [2] SEAL-O-RING  
  109-0076 [4] SEAL-O-RING  
  109-0073 [1] SEAL-O-RING  
  109-0072 [5] SEAL-O-RING  
  8M-8283 [1] SEAL-O-RING  
  8C-5196 [2] SEAL-O-RING  
  5P-8119 [4] SEAL-O-RING  
    (CYLINDER HEAD PARTS)
  4F-7390 [1] SEAL-O-RING  
  1H-1023 [4] SEAL-O-RING  
  117-9712 [1] SHAFT-DRIVE IDLER  
  4N-5906 [6] SPRING-VALVE  
  6L-8562 [4] STUD-TAPERLOCK (3/8-16X1.77-IN)  
  122-0321 [4] VALVE-EXHAUST  
  122-0322 [2] VALVE-INLET  
  9H-1031 [2] WASHER-HARD (24X41.5X6-MM THK)  
  114-3364 [4] WASHER-SPECIAL (SEALING)  
  7N-2443 [1] WASHER-THRUST (2.508X3.5X0.188-IN THK)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14900691
 

5N-9004: KIT-ENGINE PARTS

5N-9004 KIT-ENGINE PARTS
MARINE SOCIETY
FOR USE WITH PROPULSION ENGINE AT 2100 RPM
AN ATTACHMENT
i02423243 SEBP1490
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7W-2225 Y [1] CYLINDER HEAD AS  
  4W-7018 Y [9] INJECTOR GP-FUEL  
  7W-0561 Y [1] PUMP GP-FUEL INJECTION  
  1W-5285 Y [1] TURBOCHARGER GP  
  9L-5854 [1] BAND-FILLER (130.2-MM ID)  
  328-5574 [2] BEARING-CONNECTING ROD (STANDARD)  
  4W-5702 AB BEARING-CONNECTING ROD (0.635-MM US)  
  4W-5703 AB BEARING-CONNECTING ROD (1.27-MM US)  
  211-0592 [1] BEARING-MAIN (STANDARD)  
  4W-5698 AB BEARING-MAIN (0.63-MM US)  
  4W-5699 AB BEARING-MAIN (1.27-MM US)  
  4W-5700 AB BEARING-MAIN (0.63-MM OS)  
  4W-5701 AB BEARING-MAIN (0.63-MM OS, 0.63-MM US)  
  4N-6658 [1] BUSHING (1.3-IN WIDE)  
  9Y-7212 [1] BODY AS-PISTON  
  3P-1323 [2] BOLT-BEARING CAP (7/8-14X7.75-IN)  
  7W-8301 [3] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  5H-1504 [1] WASHER-HARD (20X33.5X5-MM THK)  
  124-1855 [1] BOLT-12 POINT HEAD (3/4-16X7.638-IN)  
  4N-1151 [1] GASKET  
  4H-9541 [1] GASKET  
  7C-0307 [7] GASKET  
  9F-7450 [1] GASKET  
  9L-6924 [1] GASKET  
  283-5666 [1] GASKET-CYLINDER HEAD  
  129-9452 [4] GASKET-EXHAUST MANIFOLD  
  1S-4810 [1] GASKET-OIL DRAIN  
  1S-6595 [1] GASKET-OIL SUPPLY  
  6N-9133 [1] GASKET-PLATE  
  4N-1156 [2] GASKET-REGULATOR COVER  
  4N-1918 [1] GASKET-WOUND  
  271-5661 [1] GEAR AS-IDLER (43-TEETH)  
  101-3374 [1] GEAR (86-TEETH)  
  7N-7591 [1] GEAR-CRANKSHAFT (80-TEETH)  
  173-7188 [6] GUIDE-VALVE  
  1W-5283 [4] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  7C-5353 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  7C-5354 AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
  4N-5893 [2] INSERT-VALVE SEAT (INLET)(STANDARD)  
  7C-7602 AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  7C-7603 AB INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  7C-7604 AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  7C-7605 AB INSERT-VALVE SEAT (0.76-MM OS, INLET)  
  1B-8705 [1] KEY-WOODRUFF  
  140-7682 [1] KIT-GASKET (TURBOCHARGER MOUNTING)  
  9Y-6188 AB KIT-ROD BEARING (STANDARD)  
  9Y-6189 AB KIT-ROD BEARING (0.635-MM US)  
  9Y-6190 AB KIT-ROD BEARING (1.27-MM US)  
  6I-0031 [1] LINE AS-FUEL INJECTION  
  6I-0032 [1] LINE AS-FUEL INJECTION  
  6I-0033 [1] LINE AS-FUEL INJECTION  
  6I-0034 [1] LINE AS-FUEL INJECTION  
  6I-0036 [1] LINE AS-FUEL INJECTION  
  6I-0038 [1] LINE AS-FUEL INJECTION  
  9Y-3969 [1] LINE AS-FUEL INJECTION  
  124-5945 [1] LINE AS-FUEL INJECTION  
  124-5947 [1] LINE AS-FUEL INJECTION  
  197-9322 [1] LINER-CYLINDER BLOCK  
  2A-4429 [12] LOCK-RETAINER  
  8M-2296 [4] NUT-FULL (3/8-16-THD)  
  8N-1608 [1] PIN-PISTON  
  253-1752 [2] PLATE-THRUST  
  7W-2315 [9] RETAINER  
  7E-5665 [2] RETAINER-PIN  
  134-3761 [2] RING-PISTON (TOP)  
  2P-2817 [2] RING-PISTON (INTERMEDIATE)  
  7N-7078 [2] RING-PISTON (OIL CONTROL)  
  160-8178 [1] ROD AS-CONNECTING  
  6N-7175 [6] ROTOCOIL AS  
    (EACH INCLUDES)
  6N-7154 [1] ROTOCOIL AS  
  6N-7174 [1] SHIELD-OIL  
  3E-6772 [16] SEAL (WATER)  
  5P-5678 [4] SEAL  
  9L-9098 [4] SEAL-CARBON STOP  
  110-2220 [1] SEAL-LINER  
  142-7072 [1] SEAL-LINER  
  3S-9643 [1] SEAL-LIP TYPE (WATER TEMPERATURE REGULATOR)  
  142-6217 [1] SEAL-O-RING  
  5P-8119 [13] SEAL-O-RING  
  1H-1023 [4] SEAL-O-RING  
  4F-7390 [1] SEAL-O-RING  
  8C-5196 [2] SEAL-O-RING  
  8M-8283 [1] SEAL-O-RING  
  109-0072 [5] SEAL-O-RING  
  109-0073 [1] SEAL-O-RING  
  109-0076 [4] SEAL-O-RING  
  114-2687 [2] SEAL-O-RING  
  117-9712 [1] SHAFT-DRIVE IDLER  
  4N-5906 [6] SPRING-VALVE  
  6L-8562 [4] STUD-TAPERLOCK (3/8-16X1.77-IN)  
  122-0321 [4] VALVE-EXHAUST  
  122-0322 [2] VALVE-INLET  
  9H-1031 [2] WASHER-HARD (24X41.5X6-MM THK)  
  114-3364 [4] WASHER-SPECIAL (SEALING)  
  7N-2443 [1] WASHER-THRUST (2.508X3.5X0.188-IN THK)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14900692
 

7C-2947: KIT-ENGINE PARTS

7C-2947 KIT-ENGINE PARTS
MARINE SOCIETY
FOR USE WITH PROPULSION ENGINE AT 1800 RPM
AN ATTACHMENT
i02423241 SEBP1490
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7W-2225 Y [1] CYLINDER HEAD AS  
  4W-7018 Y [9] INJECTOR GP-FUEL  
  7W-0561 Y [1] PUMP GP-FUEL INJECTION  
  1W-5285 Y [1] TURBOCHARGER GP  
  9L-5854 [1] BAND-FILLER (130.2-MM ID)  
  328-5574 [2] BEARING-CONNECTING ROD (STANDARD)  
  4W-5702 AB BEARING-CONNECTING ROD (0.635-MM US)  
  4W-5703 AB BEARING-CONNECTING ROD (1.27-MM US)  
  211-0592 [1] BEARING-MAIN (STANDARD)  
  4W-5698 AB BEARING-MAIN (0.63-MM US)  
  4W-5699 AB BEARING-MAIN (1.27-MM US)  
  4W-5700 AB BEARING-MAIN (0.63-MM OS)  
  4W-5701 AB BEARING-MAIN (0.63-MM OS, 0.63-MM US)  
  9Y-7212 [1] BODY AS-PISTON  
  3P-1323 [2] BOLT-BEARING CAP (7/8-14X7.75-IN)  
  4N-6658 [1] BUSHING (1.3-IN WIDE)  
  7W-8301 [3] FASTENER GP-CYLINDER HEAD  
  4H-9541 [1] GASKET  
  7C-0307 [7] GASKET  
  9F-7450 [1] GASKET  
  9L-6924 [1] GASKET  
  283-5666 [1] GASKET-CYLINDER HEAD  
  129-9452 [4] GASKET-EXHAUST MANIFOLD  
  1S-4810 [1] GASKET-OIL DRAIN  
  4N-6340 [1] GASKET-OIL PAN  
  1S-6595 [1] GASKET-OIL SUPPLY  
  6N-9133 [1] GASKET-PLATE  
  4N-1156 [2] GASKET-REGULATOR COVER  
  4N-1918 [1] GASKET-WOUND  
  101-3374 [1] GEAR (86-TEETH)  
  271-5661 [1] GEAR AS-IDLER (43-TEETH)  
  7N-7591 [1] GEAR-CRANKSHAFT (80-TEETH)  
  173-7188 [6] GUIDE-VALVE  
  1W-5283 [4] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  7C-5353 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  7C-5354 AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
  4N-5893 [2] INSERT-VALVE SEAT (INLET)(STANDARD)  
  7C-7602 AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  7C-7603 AB INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  7C-7604 AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  7C-7605 AB INSERT-VALVE SEAT (0.76-MM OS, INLET)  
  1B-8705 [1] KEY-WOODRUFF  
  140-7682 [1] KIT-GASKET (TURBOCHARGER MOUNTING)  
  9Y-6188 AB KIT-ROD BEARING (STANDARD)  
  9Y-6189 AB KIT-ROD BEARING (0.635-MM US)  
  9Y-6190 AB KIT-ROD BEARING (1.27-MM US)  
  6I-0031 [1] LINE AS-FUEL INJECTION (NO. 1)  
  6I-0032 [1] LINE AS-FUEL INJECTION (NO. 2)  
  6I-0033 [1] LINE AS-FUEL INJECTION (NO. 3)  
  6I-0034 [1] LINE AS-FUEL INJECTION (NO. 4)  
  6I-0036 [1] LINE AS-FUEL INJECTION (NO. 6)  
  6I-0038 [1] LINE AS-FUEL INJECTION (NO. 8)  
  9Y-3969 [1] LINE AS-FUEL INJECTION  
  124-5945 [1] LINE AS-FUEL INJECTION (NO. 5)  
  124-5947 [1] LINE AS-FUEL INJECTION (NO. 7)  
  197-9322 [1] LINER-CYLINDER BLOCK  
  2A-4429 [12] LOCK-RETAINER  
  8M-2296 [4] NUT-FULL (3/8-16-THD)  
  8N-1608 [1] PIN-PISTON  
  253-1752 [2] PLATE-THRUST  
  7W-2315 [9] RETAINER  
  7E-5665 [2] RETAINER-PIN  
  134-3761 [2] RING-PISTON (TOP)  
  2P-2817 [2] RING-PISTON (INTERMEDIATE)  
  7N-7078 [2] RING-PISTON (OIL CONTROL)  
  160-8178 [1] ROD AS-CONNECTING  
  6N-7175 [6] ROTOCOIL AS  
    (EACH INCLUDES)
  6N-7174 [1] SHIELD-OIL  
  3E-6772 [16] SEAL (WATER)  
  5P-5678 SEAL (4-M)  
  9L-9098 [4] SEAL-CARBON STOP  
  110-2220 [1] SEAL-LINER  
  142-7072 [1] SEAL-LINER  
  3S-9643 [1] SEAL-LIP TYPE (WATER TEMPERATURE REGULATOR)  
  142-6217 [1] SEAL-O-RING  
  5P-8119 [13] SEAL-O-RING  
  1H-1023 [4] SEAL-O-RING  
  4F-7390 [1] SEAL-O-RING  
  8C-5196 [2] SEAL-O-RING  
  8M-8283 [1] SEAL-O-RING  
  109-0072 [5] SEAL-O-RING  
  109-0073 [1] SEAL-O-RING  
  109-0076 [4] SEAL-O-RING  
  114-2687 [2] SEAL-O-RING  
  117-9712 [1] SHAFT-DRIVE IDLER  
  4N-5906 [6] SPRING-VALVE  
  6L-8562 [4] STUD-TAPERLOCK (3/8-16X1.77-IN)  
  122-0321 [4] VALVE-EXHAUST  
  122-0322 [2] VALVE-INLET  
  9H-1031 [2] WASHER-HARD (24X41.5X6-MM THK)  
  114-3364 [4] WASHER-SPECIAL (SEALING)  
  7N-2443 [1] WASHER-THRUST (2.508X3.5X0.188-IN THK)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14900693
 

7W-4410: KIT-ENGINE PARTS

7W-4410 KIT-ENGINE PARTS -REPAIR
MARINE CLASSIFICATION SOCIETY
AN ATTACHMENT
i02130126 SEBP1490
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7W-2225 Y [1] CYLINDER HEAD AS  
  7W-0561 Y [1] PUMP GP-FUEL INJECTION  
  4W-7637 Y [1] TURBOCHARGER GP  
  9L-5854 [1] BAND-FILLER (130.2-MM ID)  
  328-5574 [2] BEARING-CONNECTING ROD (STANDARD)  
  4W-5702 AB BEARING-CONNECTING ROD (0.635-MM US)  
  4W-5703 AB BEARING-CONNECTING ROD (1.27-MM US)  
  9Y-6188 AB KIT-ROD BEARING (STANDARD)  
  9Y-6189 AB KIT-ROD BEARING (0.635-MM US)  
  9Y-6190 AB KIT-ROD BEARING (1.27-MM US)  
  211-0592 [1] BEARING-MAIN (STANDARD)  
  4N-6658 [1] BUSHING (1.3-IN WIDE)  
  9Y-7212 [1] BODY AS-PISTON  
  3P-1323 [2] BOLT-BEARING CAP (7/8-14X7.75-IN)  
  7W-8301 [3] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  124-1855 [1] BOLT-12 POINT HEAD (3/4-16X7.638-IN)  
  5H-1504 [1] WASHER-HARD (20X33.5X5-MM THK)  
  4H-9541 [1] GASKET  
  7C-0307 [7] GASKET  
  9F-7450 [1] GASKET  
  9L-6924 [1] GASKET  
  4N-1151 [1] GASKET  
  283-5666 [1] GASKET-CYLINDER HEAD  
  129-9452 [4] GASKET-EXHAUST MANIFOLD  
  1S-4810 [1] GASKET-OIL DRAIN  
  1S-6595 [1] GASKET-OIL SUPPLY  
  6N-9133 [1] GASKET-PLATE  
  4N-1156 [2] GASKET-REGULATOR COVER  
  4N-1918 [1] GASKET-WOUND  
  271-5661 [1] GEAR AS-IDLER  
  101-3374 [1] GEAR (86-TEETH)  
  7N-7591 [1] GEAR-CRANKSHAFT (80-TEETH)  
  173-7188 [6] GUIDE-VALVE  
  1W-5283 [4] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  7C-5353 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  7C-5354 AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
  4N-5893 [2] INSERT-VALVE SEAT (INLET)(STANDARD)  
  7C-7604 AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  7C-7602 AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  7C-7603 AB INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  1B-8705 [1] KEY-WOODRUFF  
  140-7682 [1] KIT-GASKET (TURBOCHARGER MOUNTING)  
  6I-0031 [1] LINE AS-FUEL INJECTION (NO. 1)  
  6I-0032 [1] LINE AS-FUEL INJECTION (NO. 2)  
  6I-0033 [1] LINE AS-FUEL INJECTION (NO. 3)  
  6I-0034 [1] LINE AS-FUEL INJECTION (NO. 4)  
  6I-0036 [1] LINE AS-FUEL INJECTION (NO. 6)  
  6I-0038 [1] LINE AS-FUEL INJECTION (NO. 8)  
  9Y-3969 [1] LINE AS-FUEL INJECTION  
  124-5945 [1] LINE AS-FUEL INJECTION (NO. 5)  
  124-5947 [1] LINE AS-FUEL INJECTION (NO. 7)  
  197-9322 [1] LINER-CYLINDER BLOCK  
  2A-4429 [12] LOCK-RETAINER  
  2N-2766 [4] LOCKNUT (3/8-16-THD)  
  4W-7019 [9] INJECTOR GP-FUEL (FUEL VALVE)  
    (EACH INCLUDES)
  9L-9098 [1] SEAL-CARBON STOP  
  7W-4482 [1] WASHER (17.14X9.76X3.18-MM THK)  
  9X-2836 [1] SCREW-BUTTON HEAD  
  114-3362 [1] SEAL-O-RING  
  8N-1608 [1] PIN-PISTON  
  253-1752 [2] PLATE-THRUST  
  7W-2315 [9] RETAINER  
  7E-5665 [2] RETAINER-PIN  
  134-3761 [2] RING-PISTON (TOP)  
  2P-2817 [2] RING-PISTON (INTERMEDIATE)  
  7N-7078 [2] RING-PISTON (OIL CONTROL)  
  160-8178 [1] ROD AS-CONNECTING  
  6N-7175 [6] ROTOCOIL AS  
    (EACH INCLUDES)
  6N-7174 [1] SHIELD-OIL  
  3E-6772 [16] SEAL (WATER)  
  5P-5678 D SEAL (4-M)  
  9L-9098 [4] SEAL-CARBON STOP  
  110-2220 [3] SEAL-LINER  
  3S-9643 [1] SEAL-LIP TYPE (WATER TEMPERATURE REGULATOR)  
  5P-8119 [13] SEAL-O-RING  
  1H-1023 [4] SEAL-O-RING  
  4F-7390 [1] SEAL-O-RING  
  8C-5196 [2] SEAL-O-RING  
  8M-8283 [1] SEAL-O-RING  
  109-0072 [5] SEAL-O-RING  
  109-0073 [1] SEAL-O-RING  
  109-0076 [4] SEAL-O-RING  
  114-2687 [2] SEAL-O-RING  
  117-9712 [1] SHAFT-DRIVE IDLER  
  4N-5906 [6] SPRING-VALVE  
  6L-8562 [4] STUD-TAPERLOCK (3/8-16X1.77-IN)  
  122-0321 [4] VALVE-EXHAUST  
  122-0322 [2] VALVE-INLET  
  9H-1031 [2] WASHER-HARD (24X41.5X6-MM THK)  
  114-3364 [4] WASHER-SPECIAL (SEALING)  
  7N-2443 [1] WASHER-THRUST (2.508X3.5X0.188-IN THK)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP14900694
 

124-7567: KIT-GASKET

124-7567 KIT-GASKET
KIT CONTAINS GASKETS AND SEALS TO INSTALL THE AFTERCOOLER AND ATTACHING LINES
FIELD REPLACEMENT ORDER 449-9769 KIT-GASKET
FOR USE WITH @@@@@ 7W-7583@@@@@, @@@@@ 4W-4000@@@@@, @@@@@ 4W-8050@@@@@, @@@@@ 7C-6039@@@@@
FIELD INSTALLATION
i05791301 SEBP1490
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  245-8342 [1] GASKET  
  4N-1848 [1] GASKET  
  4N-4307 [1] GASKET  
  4N-5795 [1] GASKET  
  4N-6296 [1] GASKET  
  7C-0307 [1] GASKET  
  109-0076 [6] SEAL-O-RING  
  110-7752 [1] SEAL-O-RING  
  112-3258 [3] SEAL-O-RING  
  112-3259 [2] SEAL-O-RING  
  112-8186 [6] SEAL-O-RING  
   
    FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
 

#SEBP14900695
 

142-5093: KIT-GASKET

142-5093 KIT-GASKET -AFTERCOOLER, LINES
KIT CONTAINS GASKETS AND SEALS TO ASSEMBLE AND REINSTALL THE AFTERCOOLER AND ATTACHING LINES.
FOR USE WITH RM516- ENGINE ARRANGEMENT S/N 48W 34165-UP, MACHINE S/N 3BJ 1-UP, RM516- ENGINE ARRANGEMENT S/N 48W 35249-UP, MACHINE S/N 3BJ 81-UP
FIELD INSTALLATION
i05987451 SEBP1490
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4N-1848 [1] GASKET  
  4N-5795 [1] GASKET  
  4N-6296 [1] GASKET  
  245-8342 [1] GASKET  
  109-0076 [6] SEAL-O-RING  
  112-3258 [3] SEAL-O-RING  
  112-3259 [2] SEAL-O-RING  
  112-8186 [2] SEAL-O-RING  
  110-7752 [1] SEAL-O-RING  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
 

#SEBP14900696
 

160-9874: KIT-GASKET

160-9874 KIT-GASKET -SINGLE CYLINDER LINER
PART OF 442-5359 KIT-CYLINDER PACK
FOR USE WITH PQ0863
ALSO FIELD INSTALLATION
i04946741 SEBP1490
1609874 KIT-GASKET Parts scheme
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-5854 [1] BAND-FILLER (130.2-MM ID)  
2. 110-2220 [1] SEAL-LINER (MID)  
3. 142-7072 [1] SEAL-LINER (COOLANT)  
4. 142-6217 [1] SEAL-O-RING  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
 

#SEBP14900697
 

208-6163: KIT-GASKET

208-6163 KIT-GASKET
FIELD INSTALLATION
i02834528 SEBP1490
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4H-9541 [1] GASKET  
  7C-0307 [6] GASKET  
  9L-6924 [1] GASKET  
  4N-7253 [4] GASKET-CHAMBER  
  283-5666 [1] GASKET-CYLINDER HEAD  
  129-9452 [4] GASKET-EXHAUST MANIFOLD  
  1S-4810 [1] GASKET-OIL DRAIN  
  1S-6595 [1] GASKET-OIL SUPPLY  
  6N-9133 [1] GASKET-PLATE  
  4N-1156 [1] GASKET-REGULATOR COVER  
  4N-1918 [1] GASKET-WOUND  
  3E-6772 [16] SEAL (WATER)  
  5P-5678 D SEAL (8-M)  
  3S-9643 D [1] SEAL-LIP TYPE (8-M)  
  4F-7390 [1] SEAL-O-RING  
  5P-8119 [4] SEAL-O-RING  
  5P-8356 [1] SEAL-O-RING  
  8C-5196 [3] SEAL-O-RING  
  8F-4994 [1] SEAL-O-RING  
  8L-2779 [8] SEAL-O-RING  
  8M-5249 [4] SEAL-O-RING  
  109-0072 [2] SEAL-O-RING  
  109-0076 [4] SEAL-O-RING  
  114-2687 [1] SEAL-O-RING  
  8H-9204 [4] WASHER-FELT (19/32X7/8X5/16-IN THK)  
  D   ORDER BY THE METER
 

#SEBP14900698
 

233-8668: KIT-GASKET

233-8668 KIT-GASKET
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL MULTIPLE CYLINDER HEADS.. KIT DOES NOT INCLUDE INJECTOR SEALS. ORDER A SINGLE SEAL KIT AS NEEDED.
FOR USE WITH E243- ENGINE ARRANGEMENT S/N 99U 1-UP
FIELD INSTALLATION
i05916191 SEBP1490
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4H-9541 [1] GASKET  
  7C-0307 [12] GASKET  
  7M-7273 [1] GASKET  
  9L-6924 [1] GASKET  
  283-5666 [2] GASKET-CYLINDER HEAD  
  129-9452 [8] GASKET-EXHAUST MANIFOLD  
  1S-4810 [1] GASKET-OIL DRAIN  
  1S-6595 [1] GASKET-OIL SUPPLY  
  6N-9133 [2] GASKET-PLATE  
  4N-1156 [2] GASKET-REGULATOR COVER  
  4N-1918 [2] GASKET-WOUND  
  5P-5678 D SEAL (8-M)  
  359-1439 [32] SEAL AS-WATER  
  1H-1023 [8] SEAL-O-RING  
  4F-7390 [1] SEAL-O-RING  
  5P-8119 [8] SEAL-O-RING  
  5P-8356 [2] SEAL-O-RING  
  8C-5196 [2] SEAL-O-RING  
  8F-4994 [1] SEAL-O-RING  
  8M-8283 [2] SEAL-O-RING  
  109-0072 [4] SEAL-O-RING  
  109-0076 [8] SEAL-O-RING  
  114-2687 [2] SEAL-O-RING  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
  D   ORDER BY THE METER
 

#SEBP14900699
 

388-0653: KIT-GASKET

388-0653 KIT-GASKET -CLASSIC
FIELD INSTALLATION
i06815800 SEBP1490
  For full view, you need register

Parts for your 3408 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (THIS KIT IS ONLY SERVICED AS A COMPLETE PACKAGE)
 

Information:

Engine News
3400 Engine Major Component Performance Guide Available
1987/07/01
"Off-Size" Bearing Kits Available
1991/10/01
Service Magazine
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03

Caterpillar Parts SIS Catalog 3408 :

4P-9350 KIT-ENGINE PARTS
6L-4502 CHART-PLATE & FILM
CHART-MECHANICAL CONTROLS
3N-9000 CHART-MECHANICAL CONTROLS
CHART-INSTRUMENT PANEL
4W-6500 CHART-INSTRUMENT PANEL
CHART-INSTRUMENT PANEL
3N-8700 CHART-INSTRUMENT PANEL
CHART-AUTOMATIC START/STOP
5N-8487 CHART-AUTOMATIC START/STOP
VOLTMETER GP
275-2112 VOLTMETER GP
VOLTMETER GP
275-2110 VOLTMETER GP
5N-9004 KIT-ENGINE PARTS
7C-2947 KIT-ENGINE PARTS
7W-4410 KIT-ENGINE PARTS
124-7567 KIT-GASKET
142-5093 KIT-GASKET
KIT-GASKET
160-9874 KIT-GASKET
208-6163 KIT-GASKET
233-8668 KIT-GASKET

Truck sale:

Caterpillar 3408 IND, Construction
45,000 
Caterpillar 3408 IND, Construction
- Industrial engines
LOUISIANA CAT POWER SYSTEMS
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.