AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

102-0298 CARTRIDGE GP-TURBOCHARGER S/N 4KC433-633 PART OF 102-0301 TURBOCHARGER GP ALSO AN ATTACHMENT G3512


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
AFTERCOOLER GP

GAS ENGINE G3512 GAS ENGINE 4KC
 G3512 ENGINE 4KC00001-UP SEBP1510 G3512 4KC   (1985)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
ACCUMULATOR GP-TURBOCHARGER
9Y-3187 ACCUMULATOR GP-TURBOCHARGER
ACCUMULATOR GP-TURBOCHARGER
9Y-5587 ACCUMULATOR GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
102-0298 CARTRIDGE GP-TURBOCHARGER
118-2988 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
1W-8421 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
2W-3558 CARTRIDGE GP-TURBOCHARGER
 

#SEBP15100420
 

102-0298: CARTRIDGE GP-TURBOCHARGER

102-0298 CARTRIDGE GP-TURBOCHARGER
S/N 4KC433-633
PART OF 102-0301 TURBOCHARGER GP
ALSO AN ATTACHMENT
i00465015 SEBP1510
1020298 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your G3512 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-3411 J [1] LOCKNUT-TURBOCHARGER (7/16-20-THD)  
2. 1N-3505 [1] SPACER-THRUST  
3. 9M-8919 J [2] RING-SEAL  
4. 109-3481 [1] PLATE AS-BACKING  
5. 1N-3557 J [1] RING-SEAL  
6. 4W-1224 [1] HOUSING AS-BEARING  
  4M-6646 [2] PIN-GROOVED  
7. 108-9340 J [1] RING-SEAL  
8. 4W-1329 [1] SHROUD  
9. 4W-1223 [1] SHAFT AS-TURBINE  
10. 6I-2104 [1] WHEEL-COMPRESSOR  
11. 1N-3712 J [1] BEARING-THRUST  
12. 1N-3365 [1] COLLAR-THRUST  
13. 2J-3118 [4] BOLT-LOCKING (3/8-16X1.25-IN)  
14. 5P-7234 J [3] RING-RETAINING  
   
    AVAILABLE REPAIR KIT(S):
  1N-3593 [1] KIT-BEARING (STANDARD)  
  108-9342 J [1] KIT-CARTRIDGE (TURBOCHARGER)  
  J   KIT(S) MARKED J INCLUDES PART(S) MARKED J
 

#SEBP15100421
 

118-2988: CARTRIDGE GP-TURBOCHARGER

118-2988 CARTRIDGE GP-TURBOCHARGER
S/N 4KC640-UP
PART OF 134-5402 TURBOCHARGER GP
i06268900 SEBP1510
  For full view, you need register

Parts for your G3512 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  239-5894 [2] BEARING-JOURNAL  
  461-3754 [2] BEARING-JOURNAL (0.51-MM OS)  
  461-3757 [2] BEARING-JOURNAL (0.25-MM US)  
  461-3762 [2] BEARING-JOURNAL (0.25-MM OS, 0.25-MM US)  
  461-3767 [2] BEARING-JOURNAL (0.25-MM OS)  
  461-3778 [2] BEARING-JOURNAL (0.25-MM US, 0.51-MM OS)  
  211-2261 [1] BEARING-THRUST  
  4P-3818 M [3] BOLT (M4X0.7X10-MM)  
  4P-3819 M [4] BOLT (M6X1X22-MM)  
  223-4291 [1] COLLAR-THRUST  
  9M-8915 [3] RING-RETAINING  
  223-4288 [2] SEAL RING-PISTON  
  223-4289 [1] SEAL RING-PISTON  
  223-4287 [1] SEAL-RING  
  461-3792 [3] WASHER (WEAR)  
  M   METRIC PART
 

#SEBP15100422
 

1W-8421: CARTRIDGE GP-TURBOCHARGER

1W-8421 CARTRIDGE GP-TURBOCHARGER
PART OF 1W-8418 TURBOCHARGER GP
i00353833 SEBP1510
1W8421 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your G3512 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-8420 [1] WHEEL-COMPRESSOR  
2. 7N-3759 J [1] RING-PISTON  
3. 9N-2046 [1] SPACER-THRUST  
4. 6N-5004 J [1] BEARING-THRUST  
5. 9M-8911 [1] COLLAR-THRUST  
6. 9M-8919 J [2] RING-SEAL  
7. 1P-1120 J [1] RING-SEAL  
8. 9M-8915 J [3] RING-RETAINING  
9. 3S-4484 J [1] LOCKNUT-TURBOCHARGER (5/16-24-THD)  
10. 9N-2036 J [4] PLATE-LOCK  
11. 0S-1616 [4] BOLT (1/4-20X1-IN)  
12. 8N-0819 [1] PLATE AS-BACKING  
  7W-0130 [1] BEARING-THRUST  
  7W-0131 [3] STUD-DRIVE  
13. 9N-2035 [1] HOUSING AS-CENTER  
  4M-6646 [2] PIN-GROOVED  
  7W-2368 [1] RING-SEAL  
14. 6N-6611 [1] WHEEL & SHAFT AS  
15. 9N-3701 [1] SHROUD  
   
    AVAILABLE REPAIR KIT(S):
  2W-0715 J [1] KIT-CARTRIDGE (TURBOCHARGER)  
    (INCLUDES SEAL RINGS, RETAINER RINGS, LOCK PLATE, LOCKNUTS, & THRUST BEARING)
  9N-2041 [1] KIT-BEARING  
  7C-7446 AB KIT-BEARING (0.51-MM OS)  
  7C-7447 AB KIT-BEARING (0.51-MM OS, 0.25-MM US)  
  7N-3193 AB KIT-BEARING (0.13-MM OS,0.13-MM US)  
  7N-3194 AB KIT-BEARING (0.25-MM OS, 0.25-MM US)  
  8N-4157 AB KIT-BEARING (0.25-MM OS)  
  8N-4158 AB KIT-BEARING (0.13-MM OS)  
  8N-4159 AB KIT-BEARING (0.13-MM US)  
  8N-4160 AB KIT-BEARING (0.25-MM US)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

#SEBP15100423
 

2W-3558: CARTRIDGE GP-TURBOCHARGER

2W-3558 CARTRIDGE GP-TURBOCHARGER
S/N 4KC163-UP
PART OF 2W-3556, 7C-4470 TURBOCHARGER GP
ALSO AN ATTACHMENT
i00358770 SEBP1510
2W3558 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your G3512 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-0819 [1] PLATE AS-BACKING  
2. 1P-1120 J [1] RING-SEAL  
3. 6N-5004 J [1] BEARING-THRUST  
4. 9N-3701 [1] SHROUD  
5. 6N-8486 [1] WHEEL & SHAFT AS  
6. 7N-3759 J [1] RING-PISTON  
7. 9M-8915 J [3] RING-RETAINING  
8. 9N-2035 [1] HOUSING AS-CENTER  
  4M-6646 [2] PIN-GROOVED  
  7W-2368 C [1] RING-SEAL  
9. 9M-8911 [1] COLLAR-THRUST  
10. 9M-8919 J [2] RING-SEAL  
11. 9N-2046 [1] SPACER-THRUST  
12. 3S-4484 J [1] LOCKNUT-TURBOCHARGER (5/16-24-THD)  
13. 1W-8420 [1] WHEEL-COMPRESSOR  
14. 0S-1616 [4] BOLT (1/4-20X1-IN)  
15. 9N-2036 J [4] PLATE-LOCK  
   
    AVAILABLE REPAIR KIT(S):
  2W-0715 J [1] KIT-CARTRIDGE (TURBOCHARGER)  
  9N-2041 [1] KIT-BEARING  
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J INCLUDES PART(S) MARKED J
 

#SEBP15100424
 

4W-2277: CARTRIDGE GP-TURBOCHARGER

4W-2277 CARTRIDGE GP-TURBOCHARGER
S/N 4KC156-UP
PART OF 7E-8465 TURBOCHARGER GP
AN ATTACHMENT
i00378490 SEBP1510
4W2277 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your G3512 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 506-9032 [1] COLLAR-THRUST  
2. 7N-6609 J [1] RING-PISTON  
3. 1P-1114 [2] BEARING-TURBOCHARGER  
4. 1P-1111 [1] BEARING-THRUST  
5. 7N-0012 [1] SHROUD  
6. 1P-1124 J [1] RING-PISTON  
7. 2P-9607 J [4] RING-RETAINING  
8. 2P-9635 [1] HOUSING AS-CENTER  
9. 155-5236 [2] SHAFT AS-TURBINE  
10. 1P-1120 J [1] RING-SEAL  
11. 4W-2278 [1] PLATE AS-BACKING  
12. 4W-2280 [1] WHEEL-COMPRESSOR  
13. 082-2753 [4] BOLT (1/4-20X0.62-IN)  
14. 155-5237 J [1] NUT  
   
    AVAILABLE REPAIR KIT(S):
  2W-0716 J [1] KIT-TURBOCHARGER REPAIR  
    (INCLUDES SEAL RING, PISTON RING, RETAINING RINGS, & NUTS)
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

#SEBP15100425
 

6I-2085: CARTRIDGE GP-TURBOCHARGER

6I-2085 CARTRIDGE GP-TURBOCHARGER
S/N 4KC291-432
PART OF 6I-2088 TURBOCHARGER GP
i00393336 SEBP1510
6I2085 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your G3512 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-3411 J [1] LOCKNUT-TURBOCHARGER (7/16-20-THD)  
2. 1N-3505 [1] SPACER-THRUST  
3. 9M-8919 J [2] RING-SEAL  
4. 7W-2300 [1] PLATE AS-BACKING  
  7W-0130 [1] BEARING-THRUST  
  7W-0131 [1] STUD-DRIVE  
5. 1N-3557 J [1] RING-SEAL  
6. 4W-1224 [1] HOUSING AS-BEARING  
  4M-6646 [2] PIN-GROOVED  
7. 4W-1222 J [1] RING-PISTON  
8. 4W-1329 [1] SHROUD  
9. 6I-2104 [1] WHEEL-COMPRESSOR  
10. 4W-1223 [1] SHAFT AS-TURBINE  
11. 1N-3712 J [1] BEARING-THRUST  
12. 1N-3365 [1] COLLAR-THRUST  
13. 2J-3118 [4] BOLT-LOCKING (3/8-16X1.25-IN)  
14. 5P-7234 [3] RING-RETAINING  
  1W-4795 F [1] PLATE-IDENTIFICATION (TURBOCHARGER CARTRIDGE)  
   
    AVAILABLE REPAIR KIT(S):
  1N-3593 [1] KIT-BEARING (STANDARD)  
  7W-4874 [1] KIT-CARTRIDGE (TURBOCHARGER)  
    (INCLUDES PARTS MARKED J)
  F   NOT SHOWN
  J  
 

#SEBP15100426
 

9N-3676: CARTRIDGE GP-TURBOCHARGER

9N-3676 CARTRIDGE GP-TURBOCHARGER
S/N 4KC119-UP
PART OF 7W-4382 TURBOCHARGER GP
ALSO AN ATTACHMENT
i00193172 SEBP1510
9N3676 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your G3512 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-3751 [1] SHROUD  
2. 7N-3759 H [1] RING-PISTON  
3. 6N-5004 H [1] BEARING-THRUST  
4. 9M-8911 [1] COLLAR-THRUST  
5. 9M-8919 H [2] RING-SEAL  
6. 9M-8915 H [3] RING-RETAINING  
7. 0S-1616 [4] BOLT (1/4-20X1-IN)  
8. 6N-7962 [1] PLATE AS-BACKING  
8A. 7W-0130 [1] BEARING-THRUST  
8B. 7W-0131 [3] STUD-DRIVE  
9. 1P-1120 H [1] RING-SEAL  
10. 9N-3674 [1] WHEEL-COMPRESSOR  
11. 9N-2046 [1] SPACER-THRUST  
12. 1S-1770 H [1] LOCKNUT-TURBOCHARGER  
13. 9N-2036 H [4] PLATE-LOCK  
14. 9N-2035 [1] HOUSING AS-CENTER  
  4M-6646 [2] PIN-GROOVED  
  7W-2368 [1] RING-SEAL  
15. 6N-4606 [1] WHEEL & SHAFT AS  
   
    AVAILABLE REPAIR KIT(S):
  9N-2041 [1] KIT-BEARING (STANDARD)  
    (INCLUDES BEARINGS & WASHERS)
  7C-7446 AB KIT-BEARING (0.51-MM OS)  
  7C-7447 AB KIT-BEARING (0.51-MM OS, 0.25-MM US)  
  7N-3194 AB KIT-BEARING (0.25-MM OS, 0.25-MM US)  
  8N-4157 AB KIT-BEARING (0.25-MM OS)  
  8N-4160 AB KIT-BEARING (0.25-MM US)  
    (EACH BEARING KIT INCLUDES BEARINGS & WASHERS)
  2W-0715 H [1] KIT-CARTRIDGE (TURBOCHARGER)  
    (INCLUDES SEAL RINGS, RETAINER RINGS, LOCK PLATE, LOCKNUTS, & THRUST BEARING)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  H   KIT MARKED H SERVICES PART(S) MARKED H
 

#SEBP15100427
 

9Y-7014: CARTRIDGE GP-TURBOCHARGER

9Y-7014 CARTRIDGE GP-TURBOCHARGER
S/N 4KC146-290; 4KC334-639
PART OF 100-3765, 9Y-1037 TURBOCHARGER GP
i00445785 SEBP1510
9Y7014 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your G3512 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-4020 [1] PLATE AS-BACKING  
  7W-0130 [1] BEARING-THRUST  
  7W-0131 [3] STUD-DRIVE  
2. 1P-1120 [1] RING-SEAL  
3. 6N-5004 [1] BEARING-THRUST  
4. 7N-3759 [1] RING-PISTON  
5. 1N-3751 [1] SHROUD  
6. 9N-2043 [1] WHEEL & SHAFT AS  
7. 9M-8915 [3] RING-RETAINING  
8. 9N-2035 [1] HOUSING AS-CENTER  
  4M-6646 [2] PIN-GROOVED  
  7W-2368 [1] RING-SEAL  
9. 9M-8911 [1] COLLAR-THRUST  
10. 9N-2046 [1] SPACER-THRUST  
  9M-8919 [2] RING-SEAL  
11. 1S-1770 [1] LOCKNUT-TURBOCHARGER  
12. 9Y-7011 [1] WHEEL-COMPRESSOR  
13. 0S-1616 [4] BOLT (1/4-20X1-IN)  
  9N-2036 [4] PLATE-LOCK  
   
    AVAILABLE REPAIR KIT(S):
  9N-2041 [1] KIT-BEARING  
 

#SEBP15100428
 

7C-1193: CONTROL GP-AIR TEMPERATURE

7C-1193 CONTROL GP-AIR TEMPERATURE -AFTERCOOLER
PART OF 7C-6462 CONTROL GP-AIR TEMPERATURE
FOR USE WITH AIR TO AIR AFTERCOOLING
AN ATTACHMENT
i00616977 SEBP1510
7C1193 CONTROL GP-AIR TEMPERATURE Parts scheme
  For full view, you need register

Parts for your G3512 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 139-4761 [2] VALVE  
2. 139-4762 [1] LINKAGE AS  
3. 139-4763 [1] TEE  
4. 139-4764 [1] ACTUATOR  
5. 139-4765 [1] POSITIONER  
6. 139-4766 [1] CONTROLLER  
7. 139-4767 [1] FILTER (AIR)  
8. 139-4768 [1] REGULATOR-PRESSURE (AIR)  
9. 139-4769 [1] VALVE  
 

#SEBP15100429
 

7C-6462: CONTROL GP-AIR TEMPERATURE

7C-6462 CONTROL GP-AIR TEMPERATURE -AFTERCOOLER
FOR USE WITH AIR TO AIR AFTERCOOLING
AN ATTACHMENT
i00409275 SEBP1510
  For full view, you need register

Parts for your G3512 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7C-1193 Y [1] CONTROL GP-AIR TEMPERATURE  
  5N-3727 [1] VALVE  
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Oversize Bearings For Turbocharger Center Housings Available
1987/04/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors
1989/05/01
New Flanges Used And Gaskets Added To Water Cooled Turbocharger Exhaust Connections
1989/12/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
New Turbocharger Groups And New Turbocharger Cartridge Groups Have Improved Thrust Bearing And Turbine Ring Seal{1052,1053}
1994/02/01
Water Cooled Turbine Housings May Require Larger Core Plugs{1065,1050}
1994/11/01
New Vent Lines Groups Prevent Air From Being Trapped Inside Water Cooled Turbocharger Housings {1380}
1995/03/01
Flexible Braided Steel Hose Maintenance{1307,1380}
1995/06/01
New Gasket Kits Available{1052,1059,1063,1100,1150,1201,1216,1304,1361,1378,1380}
1996/04/15
Turbocharger Vent Lines Important For Engine Reliability {1380}
1998/09/01
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
Two Strainers are Available to Protect the Bearings in Turbochargers {1052}
2001/08/01
Remember To Apply 5P-3931 Anti-Seize Compound To The Threads Of The Bolts And/Or Studs That Fasten The Turbocharger To The Exhaust Manifold {1052}
2001/10/01
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
New Hose Improves the Drainage of Oil from the Turbocharger During a Continuous Prelube Cycle {1052}
2003/08/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2004/04/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
New Oil Drain Tube for the Turbocharger {1052, 1307}
2006/01/30
Packaging the Turbocharger {1052}
2007/02/26
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Accurate Diagnosis of Turbocharger Failure on Certain G3500 Engines {1052}
2014/12/24
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/06/26
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Operation and Maintenance Manual
Turbocharger - Inspect
G3500 Engines
Special Instruction
Installation of 9Y1669 Turbo Kit{1052}
Installation of 9Y1669 Turbo Kit{1052}
2W716 Turbocharger Cartridge Repair Kit{1053}
2W716 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W715 Turbocharger Cartridge Repair Kit{1053}
2W715 Turbocharger Cartridge Repair Kit{1053}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Turbocharger Installation<BR> (TW61, TW78, TW81)
3500 NATURAL GAS ENGINES
Turbocharger Impeller Installation
3500 NATURAL GAS ENGINES
Turbocharger TW61
3500 NATURAL GAS ENGINES
Turbocharger TW78 &amp; TW81
3500 NATURAL GAS ENGINES
Turbocharger
3500 Spark Ignited Engines
Turbocharger
3500 Spark Ignited Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Turbochargers
3500 NATURAL GAS ENGINES
Exhaust Elbow
3512 & 3516 SPARK IGNITED ENGINES
Turbochargers
3512 & 3516 SPARK IGNITED ENGINES
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors {1058}
1989/05/01
New Flanges Used And Gaskets Added To Water Cooled Turbocharger Exhaust Connections{1059,1070}
1989/11/27
New Exhaust Manifolds And Wastegate Mounting Used On 3508 (2JF), 3512 (4KC), 3516 (3RC) SI Industrial Engines {1059,1057,1065}
1991/08/26
New Grommets With Higher Temperature Capacity Used In Clamp Assemblies {1307,1052}
1993/01/18
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
New Turbocharger Groups And New Turbocharger Cartridge Groups Have Improved Thrust Bearing And Turbine Ring Seal{1052,1053}
1994/02/07
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog G3512 :

CAP AS-RAIN
7S-4411 CAP AS-RAIN
BYPASS GP-EXHAUST
7W-5496 BYPASS GP-EXHAUST
BYPASS GP-EXHAUST
7W-5417 BYPASS GP-EXHAUST
BYPASS GP-EXHAUST
7E-4299 BYPASS GP-EXHAUST
BYPASS GP-EXHAUST
4W-5947 BYPASS GP-EXHAUST
BYPASS GP-EXHAUST
4W-5947 BYPASS GP-EXHAUST
BYPASS GP-EXHAUST
2W-4644 BYPASS GP-EXHAUST
BYPASS GP-EXHAUST
2W-4603 BYPASS GP-EXHAUST
118-2988 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
1W-8421 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
2W-3558 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
4W-2277 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
6I-2085 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
9N-3676 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
9Y-7014 CARTRIDGE GP-TURBOCHARGER
CONTROL GP-AIR TEMPERATURE
7C-1193 CONTROL GP-AIR TEMPERATURE

Truck sale:

Caterpillar G3512, Construction
124,000 USD 
Caterpillar G3512, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
616,000 
Caterpillar G3512, Construction
- mobile generator sets
MILTON CAT POWER SYSTEMS
 
525,000 
Caterpillar G3512, Construction
- mobile generator sets
MILTON CAT POWER SYSTEMS
 
639,000 
Caterpillar G3512, Construction
- mobile generator sets
MILTON CAT POWER SYSTEMS
Caterpillar G3512EP, Construction
85,000 
Caterpillar G3512EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.