AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

100-3765 TURBOCHARGER GP S/N 4KC334-639 PART OF 6I-2745 TURBOCHARGER GP G3512 GAS ENGINE


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP

GAS ENGINE G3512 GAS ENGINE 4KC
 G3512 ENGINE 4KC00001-UP SEBP1510 G3512 4KC   (1985)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
CARTRIDGE GP-TURBOCHARGER
9Y-7014 CARTRIDGE GP-TURBOCHARGER
LINES GP-TURBOCHARGER VENT
116-9850 LINES GP-TURBOCHARGER VENT
TURBOCHARGER GP
100-3765 TURBOCHARGER GP
TURBOCHARGER GP
102-0301 TURBOCHARGER GP
TURBOCHARGER GP
127-4516 TURBOCHARGER GP
TURBOCHARGER GP
133-6397 TURBOCHARGER GP
 

#SEBP15100480
 

100-3765: TURBOCHARGER GP

100-3765 TURBOCHARGER GP
S/N 4KC334-639
PART OF 6I-2745 TURBOCHARGER GP
i00459885 SEBP1510
1003765 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your G3512 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-3279 [1] CLAMP AS (COMPRESSOR)  
2. 9N-2038 [1] CLAMP AS-TURBINE  
3. 1B-5174 [7] PLUG-PIPE  
4. 9Y-7012 [1] HOUSING-COMPRESSOR  
5. 9Y-7014 Y [1] CARTRIDGE GP-TURBOCHARGER  
6. 6N-9910 [1] HOUSING AS-TURBINE  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15100481
 

102-0301: TURBOCHARGER GP

102-0301 TURBOCHARGER GP
S/N 4KC433-633
PART OF 6I-2087 TURBOCHARGER GP
ALSO AN ATTACHMENT
i00465018 SEBP1510
1020301 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your G3512 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-2086 [1] HOUSING-COMPRESSOR  
2. 7X-7731 [6] PLUG-PIPE (3/4-14-THD)  
3. 7E-8516 [2] CLAMP (TURBINE)  
4. 4P-4605 [1] HOUSING AS-TURBINE  
  3B-0645 [3] PLUG-CUP  
  3P-1896 [3] PLUG-CUP  
  4N-0932 [4] PLUG-CUP  
  100-6816 [4] PLUG-CUP  
5. 7W-2297 [1] CLAMP AS (COMPRESSOR)(COMPRESSOR)  
6. 102-0298 Y [1] CARTRIDGE GP-TURBOCHARGER  
7. 6V-2751 [8] BOLT-HIGH TEMPERATURE (3/8-16X0.75-IN)  
8. 8T-6761 [1] PLUG-PIPE (1-11-1/2 NPT THD)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15100482
 

127-4516: TURBOCHARGER GP

127-4516 TURBOCHARGER GP
i00516984 SEBP1510
1274516 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your G3512 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-9977 [1] CLAMP AS (COMPRESSOR)  
2. 9N-2038 [1] CLAMP AS-TURBINE  
    (EACH CLAMP AS INCLUDES)
  7M-9918 [1] LOCKNUT (1/4-28-THD)  
3. 136-4402 [1] CARTRIDGE GP-TURBOCHARGER  
  461-3762 [2] BEARING-JOURNAL (0.25-MM OS, 0.25-MM US)  
  461-3767 [2] BEARING-JOURNAL (0.25-MM OS)  
  461-3778 [2] BEARING-JOURNAL (0.25-MM US, 0.51-MM OS)  
  461-3792 [3] WASHER (WEAR)  
  223-4288 [2] SEAL RING-PISTON  
  223-4291 [1] COLLAR-THRUST  
  239-5894 [2] BEARING-JOURNAL  
  461-3754 [2] BEARING-JOURNAL (0.51-MM OS)  
  461-3757 [2] BEARING-JOURNAL (0.25-MM US)  
  4P-3818 M [3] BOLT (M4X0.7X10-MM)  
  4P-3819 M [4] BOLT (M6X1X22-MM)  
  9M-8915 [3] RING-RETAINING  
  211-2261 [1] BEARING-THRUST  
  223-4287 [1] SEAL-RING  
4. 245-8446 [1] HOUSING AS-COMPRESSOR  
5. 141-2519 [1] HOUSING AS-TURBINE  
  3B-0645 B [3] PLUG-CUP  
    -OR-
  3P-1896 B [3] PLUG-CUP  
  4N-0932 B [4] PLUG-CUP  
    -OR-
  100-6816 B [4] PLUG-CUP  
  B   USE AS REQUIRED
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP15100483
 

133-6397: TURBOCHARGER GP

133-6397 TURBOCHARGER GP
S/N 4KC640-653
i00503427 SEBP1510
1336397 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your G3512 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-1454 [2] ADAPTER-EXHAUST  
2. 4W-1455 [2] COUPLING-EXHAUST  
3. 4W-1478 [4] SEAL GP-EXHAUST (TURBOCHARGER)  
4. 121-5736 [2] GASKET (TURBOCHARGER)  
5. 134-5402 Y [2] TURBOCHARGER GP  
6. 0S-1594 [8] BOLT (3/8-16X1-IN)  
7. 2N-2766 [8] LOCKNUT (3/8-16-THD)  
8. 4W-2359 [2] GASKET  
9. 5M-2894 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15100484
 

134-5402: TURBOCHARGER GP

134-5402 TURBOCHARGER GP
S/N 4KC640-UP
PART OF 133-6397 TURBOCHARGER GP
i00510488 SEBP1510
1345402 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your G3512 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-5174 [4] PLUG-PIPE  
2. 6N-9908 [1] HOUSING AS-TURBINE  
  3B-0645 B [3] PLUG-CUP  
  3P-1896 B [3] PLUG-CUP  
  4N-0932 B [4] PLUG-CUP  
  100-6816 B [4] PLUG-CUP  
3. 9N-2038 [1] CLAMP AS-TURBINE  
4. 6I-0850 [1] HOUSING-COMPRESSOR  
5. 7W-2297 [1] CLAMP AS (COMPRESSOR)  
6. 118-2988 Y [1] CARTRIDGE GP-TURBOCHARGER  
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15100485
 

134-5403: TURBOCHARGER GP

134-5403 TURBOCHARGER GP
S/N 4KC645-UP
PART OF 6I-2745 TURBOCHARGER GP
i00554417 SEBP1510
1345403 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your G3512 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-5174 [7] PLUG-PIPE  
2. 1N-3279 [1] CLAMP AS (COMPRESSOR)  
3. 109-3856 [1] CARTRIDGE GP-TURBOCHARGER  
  239-5894 [1] BEARING-JOURNAL  
  461-3754 [2] BEARING-JOURNAL (0.51-MM OS)  
  461-3757 [2] BEARING-JOURNAL (0.25-MM US)  
  461-3762 [2] BEARING-JOURNAL (0.25-MM OS, 0.25-MM US)  
  461-3767 [2] BEARING-JOURNAL (0.25-MM OS)  
  461-3778 [2] BEARING-JOURNAL (0.25-MM US, 0.51-MM OS)  
  211-2261 [1] BEARING-THRUST  
  4P-3818 M [3] BOLT (M4X0.7X10-MM)  
  4P-3819 M [4] BOLT (M6X1X22-MM)  
  223-4291 [1] COLLAR-THRUST  
  9M-8915 [3] RING-RETAINING  
  223-4288 [2] SEAL RING-PISTON  
  223-4289 [1] SEAL RING-PISTON  
  223-4287 [1] SEAL-RING  
  461-3792 [3] WASHER (WEAR)  
4. 6N-9910 [1] HOUSING AS-TURBINE  
5. 9N-2038 [1] CLAMP AS-TURBINE  
6. 9Y-7012 [1] HOUSING-COMPRESSOR  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP15100486
 

1W-8418: TURBOCHARGER GP

1W-8418 TURBOCHARGER GP
PART OF 7W-5113 TURBOCHARGER GP
i00353829 SEBP1510
1W8418 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your G3512 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-8421 Y [1] CARTRIDGE GP-TURBOCHARGER  
2. 1W-8422 [1] HOUSING AS-COMPRESSOR  
3. 1W-8423 [1] HOUSING AS-TURBINE  
  4N-0932 [7] PLUG-CUP  
4. 1B-5174 [5] PLUG-PIPE  
5. 3S-5129 [1] CLAMP AS (COMPRESSOR)  
6. 9N-2038 [1] CLAMP AS-TURBINE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP15100487
 

2W-3556: TURBOCHARGER GP

2W-3556 TURBOCHARGER GP
PART OF 7C-2374 TURBOCHARGER GP
AN ATTACHMENT
i00358767 SEBP1510
2W3556 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your G3512 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-3557 [1] HOUSING AS-COMPRESSOR  
2. 3S-5129 [1] CLAMP AS (COMPRESSOR)  
3. 2W-3558 Y [1] CARTRIDGE GP-TURBOCHARGER  
4. 6N-9906 [1] HOUSING AS-TURBINE  
  3B-0645 B [3] PLUG-CUP (31.75MM OD)  
  4N-0932 B [4] PLUG-CUP (57.15MM OD)  
  3P-1896 B [3] PLUG-CUP (34.92MM OD)  
  100-6816 B [4] PLUG-CUP (60.32MM OD)  
5. 1B-5174 [5] PLUG-PIPE  
6. 9N-2038 [1] CLAMP AS-TURBINE  
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15100488
 

6I-2087: TURBOCHARGER GP

6I-2087 TURBOCHARGER GP
S/N 4KC291-432
i00393339 SEBP1510
6I2087 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your G3512 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-2359 [2] GASKET  
2. 7M-7273 [2] GASKET  
3. 2K-4973 [8] LOCKNUT (3/8-16-THD)  
4. 4W-1454 [2] ADAPTER-EXHAUST  
5. 4W-1478 [4] SEAL GP-EXHAUST (TURBOCHARGER)  
6. 4W-1456 [2] COUPLING-EXHAUST  
7. 0S-1594 [8] BOLT (3/8-16X1-IN)  
8. 5M-2894 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 6I-2088 Y [2] TURBOCHARGER GP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP15100489
 

6I-2087: TURBOCHARGER GP

6I-2087 TURBOCHARGER GP
S/N 4KC433-633
PART OF 123-3796 CONVERSION AR
ALSO AN ATTACHMENT
i00393347 SEBP1510
6I2087 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your G3512 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-0301 CY [2] TURBOCHARGER GP  
2. 121-5736 [2] GASKET (TURBOCHARGER)  
3. 2N-2766 [8] LOCKNUT (3/8-16-THD)  
4. 4W-1454 [2] ADAPTER-EXHAUST  
5. 4W-1478 [4] SEAL GP-EXHAUST (TURBOCHARGER)  
6. 4W-1456 [2] COUPLING-EXHAUST  
7. 0S-1594 [8] BOLT (3/8-16X1-IN)  
8. 5M-2894 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 4W-2359 [2] GASKET  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Oversize Bearings For Turbocharger Center Housings Available
1987/04/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors
1989/05/01
New Flanges Used And Gaskets Added To Water Cooled Turbocharger Exhaust Connections
1989/12/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
New Turbocharger Groups And New Turbocharger Cartridge Groups Have Improved Thrust Bearing And Turbine Ring Seal{1052,1053}
1994/02/01
Water Cooled Turbine Housings May Require Larger Core Plugs{1065,1050}
1994/11/01
New Vent Lines Groups Prevent Air From Being Trapped Inside Water Cooled Turbocharger Housings {1380}
1995/03/01
Flexible Braided Steel Hose Maintenance{1307,1380}
1995/06/01
New Gasket Kits Available{1052,1059,1063,1100,1150,1201,1216,1304,1361,1378,1380}
1996/04/15
Turbocharger Vent Lines Important For Engine Reliability {1380}
1998/09/01
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
Two Strainers are Available to Protect the Bearings in Turbochargers {1052}
2001/08/01
Remember To Apply 5P-3931 Anti-Seize Compound To The Threads Of The Bolts And/Or Studs That Fasten The Turbocharger To The Exhaust Manifold {1052}
2001/10/01
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
New Hose Improves the Drainage of Oil from the Turbocharger During a Continuous Prelube Cycle {1052}
2003/08/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2004/04/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
New Oil Drain Tube for the Turbocharger {1052, 1307}
2006/01/30
Packaging the Turbocharger {1052}
2007/02/26
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Accurate Diagnosis of Turbocharger Failure on Certain G3500 Engines {1052}
2014/12/24
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Engine Applications {1052, 1053, 108F, 1210, 1265, 1290, 1405, 1901, 5510}
2015/06/26
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Operation and Maintenance Manual
Turbocharger - Inspect
G3500 Engines
Special Instruction
Installation of 9Y1669 Turbo Kit{1052}
Installation of 9Y1669 Turbo Kit{1052}
2W716 Turbocharger Cartridge Repair Kit{1053}
2W716 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W715 Turbocharger Cartridge Repair Kit{1053}
2W715 Turbocharger Cartridge Repair Kit{1053}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Turbocharger Installation<BR> (TW61, TW78, TW81)
3500 NATURAL GAS ENGINES
Turbocharger Impeller Installation
3500 NATURAL GAS ENGINES
Turbocharger TW61
3500 NATURAL GAS ENGINES
Turbocharger TW78 &amp; TW81
3500 NATURAL GAS ENGINES
Turbocharger
3500 Spark Ignited Engines
Turbocharger
3500 Spark Ignited Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Turbochargers
3500 NATURAL GAS ENGINES
Exhaust Elbow
3512 & 3516 SPARK IGNITED ENGINES
Turbochargers
3512 & 3516 SPARK IGNITED ENGINES
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Two Retainers Used To Better Fasten Air Inlet Pipes In Turbocharger Compressors {1058}
1989/05/01
New Flanges Used And Gaskets Added To Water Cooled Turbocharger Exhaust Connections{1059,1070}
1989/11/27
New Exhaust Manifolds And Wastegate Mounting Used On 3508 (2JF), 3512 (4KC), 3516 (3RC) SI Industrial Engines {1059,1057,1065}
1991/08/26
New Grommets With Higher Temperature Capacity Used In Clamp Assemblies {1307,1052}
1993/01/18
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
New Turbocharger Groups And New Turbocharger Cartridge Groups Have Improved Thrust Bearing And Turbine Ring Seal{1052,1053}
1994/02/07
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog G3512 :

PRECLEANER GP
5N-7831 PRECLEANER GP
MUFFLER
2W-4076 MUFFLER
MUFFLER
2W-4075 MUFFLER
MUFFLER
2W-4073 MUFFLER
MUFFLER
2W-4073 MUFFLER
MUFFLER
2W-4072 MUFFLER
MUFFLER
141-7047 MUFFLER
MOUNTING GP-AIR CLEANER
4W-6341 MOUNTING GP-AIR CLEANER
TURBOCHARGER GP
102-0301 TURBOCHARGER GP
TURBOCHARGER GP
127-4516 TURBOCHARGER GP
TURBOCHARGER GP
133-6397 TURBOCHARGER GP
TURBOCHARGER GP
134-5402 TURBOCHARGER GP
TURBOCHARGER GP
134-5403 TURBOCHARGER GP
TURBOCHARGER GP
1W-8418 TURBOCHARGER GP
TURBOCHARGER GP
2W-3556 TURBOCHARGER GP
TURBOCHARGER GP
6I-2087 TURBOCHARGER GP

Truck sale:

Caterpillar G3512, Construction
124,000 USD 
Caterpillar G3512, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
616,000 
Caterpillar G3512, Construction
- mobile generator sets
MILTON CAT POWER SYSTEMS
 
525,000 
Caterpillar G3512, Construction
- mobile generator sets
MILTON CAT POWER SYSTEMS
 
639,000 
Caterpillar G3512, Construction
- mobile generator sets
MILTON CAT POWER SYSTEMS
Caterpillar G3512EP, Construction
85,000 
Caterpillar G3512EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.