AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7W-2224 CYLINDER HEAD GP S/N 28V4910-4938 PART OF 4W-7005 CYLINDER HEAD GP 3408 TRUCK ENGINE


BASIC ENGINE
CYLINDER HEAD GP
DAMPER GP
DRIVE GP-ACCESSORY
DRIVE GP-FAN
ENGINE BRAKE GP
FLYWHEEL GP

TRUCK ENGINE 3408 TRUCK ENGINE 28V
 3408/3408B Truck Engine 28V04750-UP SEBP1513 3408 28V   (1985)

BASIC ENGINE

CYLINDER HEAD GP
CYLINDER HEAD GP
4W-7005 CYLINDER HEAD GP
CYLINDER HEAD GP
7W-2224 CYLINDER HEAD GP
CYLINDER HEAD GP
7W-2224 CYLINDER HEAD GP
437-8140 KIT-CYLINDER HEAD GASKET
 

#SEBP15130060
 

7W-2224: CYLINDER HEAD GP

7W-2224 CYLINDER HEAD GP
S/N 28V4910-4938
PART OF 4W-7005 CYLINDER HEAD GP
i00108212 SEBP1513
7W2224 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3408 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-3788 CY [1] CYLINDER HEAD AS  
2. 115-2368 [8] VALVE-INLET  
3. 2N-5775 [8] DOWEL  
4. 2A-4429 [32] LOCK-RETAINER  
5. 6N-7175 [16] ROTOCOIL AS  
    (EACH INCLUDES)
  6N-7174 [1] SHIELD-OIL  
6. 4N-5906 [16] SPRING-VALVE  
7. 115-2367 [8] VALVE-EXHAUST  
8. 173-7188 [16] GUIDE-VALVE (STANDARD)  
  7C-5306 AB GUIDE-VALVE (0.51-MM OS)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15130061
 

9N-5273: DAMPER & PULLEY GP

9N-5273 DAMPER & PULLEY GP
AN ATTACHMENT
i00438182 SEBP1513
9N5273 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your 3408 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 108-4096 [1] DAMPER AS  
2. 6N-0828 [1] PULLEY  
3. 6F-7024 [9] BOLT (5/8-18X5-IN)  
4. 9N-6085 [1] ADAPTER-DAMPER  
5. 0S-1566 [4] BOLT (5/8-11X1.5-IN)  
 

#SEBP15130062
 

4N-1560: DAMPER GP

4N-1560 DAMPER GP
S/N 28V4750-4918
i00107910 SEBP1513
4N1560 DAMPER GP Parts scheme
  For full view, you need register

Parts for your 3408 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-2109 [1] ADAPTER-DAMPER  
2. 0T-0857 [6] BOLT (5/8-18X4.5-IN)  
    -OR-
  1A-3203 [6] BOLT (5/8-18X4.75-IN)  
  4D-3704 [6] WASHER-HARD (17X30X5-MM THK)  
3. 2P-5149 [1] DAMPER AS  
 

#SEBP15130063
 

4P-5893: DAMPER GP

4P-5893 DAMPER GP
S/N 28V4913-UP
i00122098 SEBP1513
4P5893 DAMPER GP Parts scheme
  For full view, you need register

Parts for your 3408 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 167-8126 [1] DAMPER AS  
2. 1A-3203 [6] BOLT (5/8-18X4.75-IN)  
3. 4N-2109 [1] ADAPTER-DAMPER  
4. 168-2100 [1] SPACER (131.57X163.6X8-MM THK)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP15130064
 

4N-2038: DRIVE GP-ACCESSORY

4N-2038 DRIVE GP-ACCESSORY
HYDRAULIC PUMP
AN ATTACHMENT
i00370034 SEBP1513
4N2038 DRIVE GP-ACCESSORY Parts scheme
  For full view, you need register

Parts for your 3408 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-5330 [1] BOLT (3/8-16X2.88-IN)  
  5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
2. 7N-9321 C [1] GEAR-HYDRAULIC PUMP DRIVE (42 TEETH)  
3. 1S-7408 [1] SEAL-O-RING  
4. 4N-1635 [1] ADAPTER-HYDRAULIC PUMP  
5. 2M-4779 [2] STUD-TAPERLOCK (3/8-16X1.75-IN)  
6. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
7. 9L-1633 C [1] GASKET-DRIVE  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP15130065
 

9N-0725: DRIVE GP-ACCESSORY

9N-0725 DRIVE GP-ACCESSORY
i00093492 SEBP1513
9N0725 DRIVE GP-ACCESSORY Parts scheme
  For full view, you need register

Parts for your 3408 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9322 C [1] GEAR-COMPRESSOR DRIVE (46-TEETH)  
2. 9L-5961 [1] ADAPTER-COMPRESSOR DRIVE  
3. 5P-8940 C [1] SEAL-O-RING  
4. 6B-6683 C [1] NUT (5/8-18-THD)  
  9H-1024 C [1] WASHER-HARD (17X30X6-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP15130066
 

9N-0723: DRIVE GP-FAN

9N-0723 DRIVE GP-FAN
FOR USAGE REFER TO CHART @@@@@ 9N-1294@@@@@
AN ATTACHMENT
i00435974 SEBP1513
9N0723 DRIVE GP-FAN Parts scheme
  For full view, you need register

Parts for your 3408 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8487 C [1] FITTING-GREASE  
2. 5K-9239 [1] CONNECTOR  
3. 9N-0337 [1] PULLEY-FAN DRIVE  
4. 1A-2029 [6] BOLT (3/8-16X1.125-IN)  
  5M-2894 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 7F-2122 [1] SEAL-O-RING  
6. 1H-5403 [2] BOLT (5/16-24X2-IN)  
  5S-7264 [1] WASHER-RETAINING (0.219-IN THK)  
7. 8H-9789 [2] BALL BEARING  
8. 9N-1012 [1] SPACER-BEARING (1.438X1.75X1-IN THK)  
9. 9N-1262 [1] SHAFT-FAN  
10. 9N-1258 [1] BRACKET AS-FAN  
11. 5M-1932 [4] STUD-TAPERLOCK (1/2-13X2.17-IN)  
  1D-4719 [4] NUT-FULL (1/2-13-THD)  
  2M-0849 [4] WASHER-HARD (13.5X25.5X5-MM THK)  
12. 9S-7720 [1] ELBOW-FLARED  
13. 5B-5812 [1] DOWEL  
14. 5S-9062 [1] SPACER (35.032X50.8X15.88-MM THK)  
15. 5S-2106 [1] SEAL-LIP TYPE  
16. 9N-1002 [1] TUBE AS  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP15130067
 

9N-2803: DRIVE GP-FAN

9N-2803 DRIVE GP-FAN
FOR USAGE REFER TO CHART @@@@@ 9N-1294@@@@@
AN ATTACHMENT
i00436711 SEBP1513
9N2803 DRIVE GP-FAN Parts scheme
  For full view, you need register

Parts for your 3408 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8487 [1] FITTING-GREASE  
2. 5K-9239 [1] CONNECTOR  
3. 9N-1013 [1] PULLEY-FAN DRIVE  
4. 3B-1915 [6] BOLT (3/8-16X1.375-IN)  
  5M-2894 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 7F-2122 [1] SEAL-O-RING  
6. 1H-5403 [2] BOLT (5/16-24X2-IN)  
  5S-7264 [1] WASHER-RETAINING (0.219-IN THK)  
7. 8H-9789 [2] BALL BEARING  
8. 9N-1017 [1] SPACER-BEARING  
9. 5M-1932 [4] STUD-TAPERLOCK (1/2-13X2.17-IN)  
  1D-4719 [4] NUT-FULL (1/2-13-THD)  
  2M-0849 [4] WASHER-HARD (13.5X25.5X5-MM THK)  
10. 9N-2801 [1] BRACKET AS-FAN  
  9N-1258 [1] BRACKET AS-FAN  
11. 9N-1274 [1] SHAFT-FAN  
12. 5B-5812 [1] DOWEL  
13. 9S-7720 [1] ELBOW-FLARED  
14. 5S-9062 [1] SPACER (35.032X50.8X15.88-MM THK)  
15. 5S-2106 [1] SEAL-LIP TYPE  
16. 9N-3378 [1] TUBE AS-SUPPLY  
 

#SEBP15130068
 

9N-2059: FASTENER GP-BRAKESAVER

9N-2059 FASTENER GP-BRAKESAVER
S/N 28V4750-5105
i00436397 SEBP1513
9N2059 FASTENER GP-BRAKESAVER Parts scheme
  For full view, you need register

Parts for your 3408 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5B-5059 [3] BOLT (7/16-14X5-IN)  
  3K-6113 [3] WASHER-HARD (12X18.5X3-MM THK)  
    -OR-
  3B-7614 C [3] BOLT (3/8-16X4-IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP15130069
 

107-3847: FLYWHEEL GP

107-3847 FLYWHEEL GP
S/N 28V4951-UP
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING, 15.5-INCH CLUTCH
i00470450 SEBP1513
1073847 FLYWHEEL GP Parts scheme
  For full view, you need register

Parts for your 3408 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 125-0157 [1] FLYWHEEL AS  
2. 4N-2514 [1] GEAR (113-TEETH)  
3. 0S-1576 [12] BOLT (5/8-18X2-IN)  
4. 4D-3704 [12] WASHER-HARD (17X30X5-MM THK)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

Information:

Truck Engine News
Service Manual Information About Inside Diameters Of Valve Guides
1981/11/13
New Fuel Nozzle Adapter Assembly Used
1982/02/17
Carbon Build-up In Combustion And Inlet Areas
1982/03/31
Separate Valve Stem Gauges Available
1982/06/23
Improved Inlet And Exhaust Valves
1982/09/29
New Head Gasket Improves Seal Between Block And Liner Flange
1982/09/29
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter
1982/10/27
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads
1983/01/26
Engine Valve Stem "use Again " Specifications
1983/03/02
New Fuel Nozzle Adapters Used
1983/05/18
New Liner Seat Insert Available
1983/08/31
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/11/23
New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position
1984/04/04
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads
1984/05/23
Surface Grinding Of Compacted Graphite Iron Cylinder Heads
1984/09/26
New Inlet Valves Used In Cylinder Heads
1984/09/26
New High Alloy Material Is Used In Cylinder Head Assemblies
1984/11/07
Extra Injection Nozzle Clamp Helps Prevent Injection Nozzle Damage
1985/07/01
Silicone Rubber Water Seals Available
1987/07/01
New Liner Seat Insert Available
1988/11/01
Improved Head Gasket Used; Service Tips
1990/02/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
New Liner Seat Inserts Available
1992/11/01
Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/01/01
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/22
New Intake And Exhaust Valves Used{1105,1100}
1994/06/24
New Water Seals Used in 3400 Head Assemblies{1124}
1994/08/30
Remanufactured 3400 Cylinder Heads Now Use Intake And Exhaust Valves With Chrome Plated Valve Stems{1105}
1994/09/01
New Inlet And Exhaust Valves Have Thinner Heads{1105}
1995/02/01
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/01
Engine News
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/18
Recommended Repairs After Cylinder Head Gasket Failure {1101}
1999/11/01
Improved Exhaust Valve Now Available
1977/03/15
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads
1977/06/29
Clean Bolt Holes In Cylinder Block Before Cylinder Heads Are Installed
1977/07/13
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
5P8700 Lifting Brackets Permit Cylinder Head Assembly To Be Removed And Installed
1978/07/05
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned
1978/08/16
Improved Cylinder Head Assemblies Are Available through Cat Reman for Certain Commercial Engines {1100}
2014/10/10
A New Water Seal Assembly Is Now Used on All 3408, 3412, C27 and C32 Commercial Engines {1100, 7555}
2013/05/13
Special Instruction
Installation of 0R1160, 0R1161 and 0R1248 Remanufactured Cylinder Head Groups{1100}
Installation of 0R1160, 0R1161 and 0R1248 Remanufactured Cylinder Head Groups{1100}
3400 Cylinder Head To Block Joint Repair Procedure{1124}
3400 Cylinder Head To Block Joint Repair Procedure{1124}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Installation Of 7N9013 Gasket Service Group{1101, 1221}
Installation Of 7N9013 Gasket Service Group{1101, 1221}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Installation Of 2W3815 Or 5N93 Inserts{1217}
Installation Of 2W3815 Or 5N93 Inserts{1217}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Technical Information Bulletin
Failures of the 4W-5733 Valve Adapter and the 4W-5719 Adapter As on Certain 3408 and 3412 Engines{1100}
Failures of the 4W-5733 Valve Adapter and the 4W-5719 Adapter As on Certain 3408 and 3412 Engines{1100}
Specifications
Valves, Valve Springs And Valve Seat Inserts
3408 & 3408B DIESEL TRUCK ENGINE
Cylinder Heads
3408 & 3408B DIESEL TRUCK ENGINE
Tool Operating Manual
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES FOR MINING AND OTHER APPLICATIONS
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES FOR MINING AND OTHER APPLICATIONS
Disassembly and Assembly
Precombustion Chambers
3408 & 3408B DIESEL TRUCK ENGINE
Direct Injection Adapters
3408 & 3408B DIESEL TRUCK ENGINE
Fuel Injection Nozzles (Direct Injection With Earlier 7000 Series Nozzles)
3408 & 3408B DIESEL TRUCK ENGINE
Cylinder Heads
3408 & 3408B DIESEL TRUCK ENGINE
Valves
3408 & 3408B DIESEL TRUCK ENGINE
Valve Seat Inserts
3408 & 3408B DIESEL TRUCK ENGINE
Bridge Dowels
3408 & 3408B DIESEL TRUCK ENGINE
Valve Guides
3408 & 3408B DIESEL TRUCK ENGINE
Service Magazine
Service Manual Information About Inside Diameters Of Valve Guides{1104,0374}
1981/10/05
New Fuel Nozzle Adapter Assembly Used{1106}
1982/02/15
Reconditioning of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary{1100}
1982/03/08
Carbon Build-Up In Combustion And Inlet Areas{1058,1101,1105,1214,1104}
1982/03/22
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
Improved Inlet And Exhaust Valves{1105}
1982/09/06
New Instruction Card Available For 6V87 Valve Stem Gauge{0653}
1982/09/06
New Head Gasket Improves Seal Between Block And Liner Flange{1101,1201}
1982/09/27
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter{1106}
1982/10/18
Cold Weather Engine Operation{1105,1208,1355,1380}
1982/10/25
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1982/12/20
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
New Fuel Nozzle Adapters Used{1106}
1983/05/09
New Liner Seat Insert Available{1217}
1983/08/15
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position{1106,1252}
1984/02/27
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1984/04/23
Surface Grinding Of Compacted Graphite Iron Cylinder Heads{1101}
1984/07/02
New Inlet Valve Used{1105}
1984/09/03
New High Alloy Material Is Used In Cylinder Head Assemblies{1101}
1984/10/15
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
New Cylinder Heads And Fuel Nozzle Adapters Used{1101,1106}
1985/07/01
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
Cylinder Head And Valve Rocker Arm Brackets Have Oil Supply Passages In A Different Location To Prevent Possible Oil Leakage Into Cooling System {1100,1102,1350}
1985/10/21
Adjust Bridge Whenever Valve Clearance Adjustments Are Made{1121,1105,1100}
1986/04/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed{1000,1100,1200}
1986/09/08
Avoid Oil Contact With New Water Passage Seals Used In Cylinder Head Groups{1100}
1986/12/15
New Water Temperature Regulator Has A Closer Fit At The Valve Seat To Keep Leakage At A Minimum{1355}
1977/01/17
Improved Exhaust Valve Now Available{1105}
1977/02/28
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads{0663,1101}
1977/06/20
Clean Bolt Holes In Cylinder Block Before Cylinder Heads Are Installed{1101,1201}
1977/08/08
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Change To Interval For Valve Lash Adjustment{1103,1105,1123}
1987/02/16
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
Silicone Rubber Water Seals Available{1100}
1987/07/06
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A Gasket Group Is Available To Give Improved Sealing For The Oil Supply To The Rocker Arms On Early Engines{1101,1102,1221}
1978/04/03
5P8700 Lifting Brackets Permit Cylinder Head Assembly To Be Removed And Installed{0644,1100}
1978/06/19
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned{1254,1101}
1978/08/07
Head Bolt Holes In Cylinder Blocks Can Be Repaired{1201,1101}
1988/10/24
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Head Gasket Used; Service Tips {1124,1216,1221,7568}
1990/02/26
Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary{1121}
1990/04/30
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/02/07
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/04
A New Water Seal Assembly Is Now Used on All 3408 and 3412 Engines {1100, 7555}
2013/08/06

Caterpillar Parts SIS Catalog 3408 :

CYLINDER HEAD GP
7W-2224 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-7005 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-7005 CYLINDER HEAD GP
CYLINDER HEAD GP
4W-7005 CYLINDER HEAD GP
CYLINDER HEAD GP
4N-1816 CYLINDER HEAD GP
CYLINDER HEAD GP
4N-1816 CYLINDER HEAD GP
CYLINDER HEAD GP
1W-9802 CYLINDER HEAD GP
CYLINDER HEAD GP
141-1207 CYLINDER HEAD GP
DAMPER & PULLEY GP
9N-5273 DAMPER & PULLEY GP
DAMPER GP
4N-1560 DAMPER GP
DAMPER GP
4P-5893 DAMPER GP
DRIVE GP-ACCESSORY
4N-2038 DRIVE GP-ACCESSORY
DRIVE GP-ACCESSORY
9N-0725 DRIVE GP-ACCESSORY
DRIVE GP-FAN
9N-0723 DRIVE GP-FAN
DRIVE GP-FAN
9N-2803 DRIVE GP-FAN
FASTENER GP-BRAKESAVER
9N-2059 FASTENER GP-BRAKESAVER

Truck sale:

Caterpillar 3408 IND, Construction
45,000 
Caterpillar 3408 IND, Construction
- Industrial engines
LOUISIANA CAT POWER SYSTEMS
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.