AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4W-7375 GOVERNOR GP S/N 28V4756-UP PART OF 8N-6117 PUMP GP-GOV, FUEL INJ & TFR Type 1 3408 TRUCK ENGINE


FUEL SYSTEM
GOVERNOR GP
PUMP GP-FUEL INJECTION
LINES GP-FUEL INJECTION
FILTER GP-FUEL
LINES GP-FUEL INJECTION

TRUCK ENGINE 3408 TRUCK ENGINE 28V
 3408/3408B Truck Engine 28V04750-UP SEBP1513 3408 28V   (1985)

FUEL SYSTEM

GOVERNOR GP
DRIVE GP-GOVERNOR & FUEL PUMP
9N-3959 DRIVE GP-GOVERNOR & FUEL PUMP
GOVERNOR GP
4W-7375 GOVERNOR GP
GOVERNOR GP
4W-7375 GOVERNOR GP
GOVERNOR GP
7N-6271 GOVERNOR GP
PISTON GP-GOVERNOR SERVO
6N-1947 PISTON GP-GOVERNOR SERVO
 

#SEBP15130180
 

4W-7375: GOVERNOR GP

4W-7375 GOVERNOR GP
S/N 28V4756-UP
PART OF 8N-6117 PUMP GP-GOV, FUEL INJ & TFR
Type 1
i00380196 SEBP1513
4W7375 GOVERNOR GP Parts scheme 4W7375 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3408 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-3363 [1] HOUSING AS-GOVERNOR  
2. 8S-0134 [1] BUSHING  
3. 8M-8403 [1] SPRING-GUIDE  
4. 9S-8001 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
5. 9S-0798 [1] BUSHING  
6. 5P-3272 [2] SEAL-LIP TYPE  
7. 8L-4308 [1] BOLT (5/16-18X2.75-IN)  
8. 9M-1974 [5] WASHER-HARD (8.8X16X2-MM THK)  
9. 2B-2695 [1] BOLT (5/16-18X0.875-IN)  
10. 2P-8707 [1] PLATE AS-GOVERNOR  
11. 8L-4175 [1] DOWEL  
12. 0S-1594 [1] BOLT (3/8-16X1-IN)  
13. 1D-4540 [3] BOLT (5/16-18X2.75-IN)  
14. 9N-1391 [1] SHAFT  
15. 9N-1917 [1] COVER AS  
16. 3P-0009 [1] INSULATOR  
17. 9N-1916 [1] LEVER-SHUTOFF  
18. 5M-6228 [1] BEARING AS-NEEDLE  
19. 2A-0762 [2] BOLT (1/4-20X0.625-IN)  
20. 9N-2165 [1] LEVER-SOLENOID  
21. 1S-7336 [2] LOCK-BOLT  
22. 0S-1614 [2] BOLT (1/4-20X0.5-IN)  
23. 5P-0796 [2] SEAL-LIP TYPE  
24. 4N-0951 [1] SHAFT-SHUTOFF  
25. 1S-7984 [1] BUSHING  
26. 1K-4703 [1] WASHER (13.1X22.2X1.6-MM THK)  
27. 2J-0157 [1] SEAL-O-RING  
28. 9N-3324 [1] SCREW-ADJUSTMENT (HI-IDLE)  
29. 8H-9204 [2] WASHER-FELT (19/32X7/8X5/16-IN THK)  
30. 5L-8992 [1] COVER-ADJUSTMENT  
31. 5P-6945 [1] BOLT (1/4-20X1.125-IN)  
  4B-9747 [1] WASHER (0.266X0.375X0.031-IN THK)  
32. 9S-8008 [1] PLUG (1-1/16-12-THD)  
  3D-2824 [1] SEAL-O-RING  
33. 6N-8793 [1] SPRING  
34. 3L-5987 [1] COVER  
35. 2N-4386 [1] COVER  
36. 1B-2714 [2] BOLT (1/4-20X2.5-IN)  
  1B-4330 [2] NUT (1/4-20-THD)(FULL)  
  5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
37. 6L-1597 [2] GASKET  
38. 2P-8669 [1] GASKET  
39. 2W-1491 [1] LEVER-CONTROL  
40. 1B-4201 [1] NUT-FULL (1/4-28-THD)  
41. 8L-4155 [1] SETSCREW  
42. 9M-4704 [1] BOLT (8-32X1-IN)  
43. 2P-8679 [1] STRAINER AS (FUEL)  
44. 2P-8697 [1] GASKET  
45. 8L-4154 [1] COLLAR-LOAD STOP  
46. 4N-1870 [1] GASKET-HOUSING  
47. 8H-9181 [1] SPRING-BUMPER  
48. 6N-3504 [1] SEAT-GOVERNOR SPRING  
49. 1B-9575 [1] BOLT (5/16-18X1.56-IN)  
50. 6N-9040 [1] DRIVE AS-FLEXIBLE  
51. 2W-9780 [1] PIN AS  
52. 4W-7374 Y [1] PLATE GP-GOVERNOR ADAPTER  
53. 6N-8780 [1] STOP  
54. 5L-8991 [1] GASKET-COVER  
55. 4W-7654 [1] BOLT (1/4-28X1.25-IN)  
56. 9S-4182 C [1] PLUG (7/16-20-THD)  
  3J-7354 C [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15130181
 

4W-7375: GOVERNOR GP

4W-7375 GOVERNOR GP
S/N 28V4756-UP
PART OF 126-2276 PUMP GP-GOV & FUEL INJ, 8N-6117 PUMP GP-GOV, FUEL INJ & TFR
Type 2
i00380197 SEBP1513
4W7375 GOVERNOR GP Parts scheme 4W7375 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3408 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-3363 [1] HOUSING AS-GOVERNOR  
2. 7E-8940 [1] BUSHING  
3. 7E-8941 [1] BUSHING  
4. 9S-8001 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
5. 8M-8403 [1] SPRING-GUIDE  
6. 138-9507 [2] SEAL-LIP TYPE  
7. 8L-4308 [1] BOLT (5/16-18X2.75-IN)  
8. 9M-1974 [5] WASHER-HARD (8.8X16X2-MM THK)  
9. 2B-2695 [1] BOLT (5/16-18X0.875-IN)  
10. 2P-8707 [1] PLATE AS-GOVERNOR  
11. 8L-4175 [1] DOWEL  
12. 0S-1594 [1] BOLT (3/8-16X1-IN)  
13. 1D-4540 [3] BOLT (5/16-18X2.75-IN)  
14. 9N-1391 [1] SHAFT  
15. 9N-1917 [1] COVER AS  
16. 3P-0009 [1] INSULATOR  
17. 9N-1916 [1] LEVER-SHUTOFF  
18. 5M-6228 [1] BEARING AS-NEEDLE  
19. 033-5359 [4] SCREW-HEAD BOLT  
20. 9N-2165 [1] LEVER-SOLENOID  
22. 1K-4703 [1] WASHER (13.1X22.2X1.6-MM THK)  
23. 5P-0796 [2] SEAL-LIP TYPE  
24. 4N-0951 [1] SHAFT-SHUTOFF  
25. 1S-7984 [1] BUSHING  
26. 8H-9204 [2] WASHER-FELT (19/32X7/8X5/16-IN THK)  
27. 2J-0157 [1] SEAL-O-RING  
28. 9N-3324 [1] SCREW-ADJUSTMENT (HI-IDLE)  
29. 5L-8992 [1] COVER-ADJUSTMENT  
30. 5P-6945 [1] BOLT (1/4-20X1.125-IN)  
  4B-9747 [1] WASHER (0.266X0.375X0.031-IN THK)  
31. 9S-8008 [1] PLUG (1-1/16-12-THD)  
  3D-2824 [1] SEAL-O-RING  
32. 6N-8793 [1] SPRING  
33. 3L-5987 [1] COVER  
34. 7C-5279 C [1] COVER  
35. 4B-9365 C [2] BOLT (1/4-20X3-IN)  
  1B-4330 [2] NUT (1/4-20-THD)  
  5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
36. 8L-3873 C [2] GASKET  
37. 2P-8669 [1] GASKET  
38. 2W-1491 [1] LEVER-CONTROL  
39. 1B-4201 [1] NUT-FULL (1/4-28-THD)  
40. 8L-4155 [1] SETSCREW  
41. 9M-4704 [1] BOLT (8-32X1-IN)  
42. 2P-8679 [1] STRAINER AS (FUEL)  
43. 2P-8697 [1] GASKET  
44. 8L-4154 [1] COLLAR-LOAD STOP  
45. 4N-1870 [1] GASKET-HOUSING  
46. 8H-9181 [1] SPRING-BUMPER  
47. 6N-3504 [1] SEAT-GOVERNOR SPRING  
48. 1B-9575 [1] BOLT (5/16-18X1.56-IN)  
49. 6N-9040 [1] DRIVE AS-FLEXIBLE  
  6D-9953 [1] PIN-SPRING  
  9N-2428 [1] RIVET  
50. 2W-9780 [1] PIN AS  
51. 4W-7374 Y [1] PLATE GP-GOVERNOR ADAPTER  
52. 6N-8780 [1] STOP  
53. 5L-8991 [1] GASKET-COVER  
54. 4W-7654 [1] BOLT (1/4-28X1.25-IN)  
55. 9S-4182 [1] PLUG (7/16-20-THD)  
  3J-7354 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15130182
 

7N-6271: GOVERNOR GP

7N-6271 GOVERNOR GP
S/N 28V4750-4755
PART OF 8N-6117 PUMP GP-GOV, FUEL INJ & TFR
i00410154 SEBP1513
7N6271 GOVERNOR GP Parts scheme 7N6271 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3408 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-3363 [1] HOUSING AS-GOVERNOR  
2. 8S-0134 [1] BUSHING  
3. 8M-8403 [1] SPRING-GUIDE  
4. 9S-8001 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
5. 9S-0798 [1] BUSHING  
6. 8T-2604 C [2] SEAL-LIP TYPE  
7. 8L-4308 [1] BOLT (5/16-18X2.75-IN)  
8. 9M-1974 C [5] WASHER-HARD (8.8X16X2-MM THK)  
9. 2B-2695 [1] BOLT (5/16-18X0.875-IN)  
10. 2P-8707 [1] PLATE AS-GOVERNOR  
11. 8L-4175 [1] DOWEL  
12. 0S-1594 [1] BOLT (3/8-16X1-IN)  
13. 1D-4540 [3] BOLT (5/16-18X2.75-IN)  
14. 1N-4656 C [1] SHAFT  
15. 9N-1917 C [1] COVER AS  
16. 3P-0009 [1] INSULATOR  
17. 9N-1916 [1] LEVER-SHUTOFF  
18. 5M-6228 [1] BEARING AS-NEEDLE  
19. 033-5359 [4] SCREW-HEAD BOLT  
20. 9N-2165 [1] LEVER-SOLENOID  
21. 1S-7984 [1] BUSHING  
22. 1K-4703 [1] WASHER (13.1X22.2X1.6-MM THK)  
23. 5P-0796 [2] SEAL-LIP TYPE  
24. 4N-0951 [1] SHAFT-SHUTOFF  
25. 2J-0157 [2] SEAL-O-RING  
26. 9N-3324 [1] SCREW-ADJUSTMENT (HI-IDLE)  
27. 7N-7325 [1] SCREW-ADJUSTMENT (LO-IDLE)  
28. 5L-8992 [1] COVER-ADJUSTMENT  
29. 5P-6945 C [1] BOLT (1/4-20X1.125-IN)  
  4B-9747 [1] WASHER (0.266X0.375X0.031-IN THK)  
30. 8L-4155 [1] SETSCREW  
  1B-4201 [1] NUT-FULL (1/4-28-THD)  
31. 9M-4704 [1] BOLT (8-32X1-IN)  
32. 8L-4154 [1] COLLAR-LOAD STOP  
33. 2N-4386 [1] COVER  
34. 1B-2714 [2] BOLT (1/4-20X2.5-IN)  
  1B-4330 [2] NUT (1/4-20-THD)  
  5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
35. 6L-1597 C [2] GASKET  
36. 2P-8669 [1] GASKET  
37. 2W-1493 C [1] LEVER AS-CONTROL  
  2W-1491 C [1] LEVER-CONTROL  
38. 9M-9788 [1] PLUNGER  
39. 7M-7316 [1] SPRING  
40. 5H-1351 [1] PIN-SPRING  
41. 2P-8679 [1] STRAINER AS (FUEL)  
42. 2P-8697 [1] GASKET  
43. 6N-3504 [1] SEAT-GOVERNOR SPRING  
44. 4N-1870 [1] GASKET-HOUSING  
45. 9S-8008 [1] PLUG (1-1/16-12-THD)  
  3D-2824 [1] SEAL-O-RING  
46. 5M-6214 [1] PLUG (1/8-27 PTF)  
47. 9N-3684 Y [1] PLATE GP-GOVERNOR ADAPTER  
48. 6N-9040 [1] DRIVE AS-FLEXIBLE  
49. 2W-9780 C [1] PIN AS  
50. 6N-8780 [1] STOP  
51. 8H-9181 [1] SPRING-BUMPER  
52. 4W-7654 C [1] BOLT (1/4-28X1.25-IN)  
53. 6N-8793 [1] SPRING  
54. 5L-8991 [1] GASKET-COVER  
55. 1B-9575 [1] BOLT (5/16-18X1.56-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15130183
 

7N-4574: HOUSING GP-FUEL PUMP

7N-4574 HOUSING GP-FUEL PUMP
PART OF 4W-6012, 7N-6389 PUMP GP-FUEL INJECTION
i00108190 SEBP1513
7N4574 HOUSING GP-FUEL PUMP Parts scheme
  For full view, you need register

Parts for your 3408 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-7266 [1] SHAFT-PUMP IDLER  
2. 7N-0242 [2] BUSHING  
3. 5B-9318 [1] BALL  
4. 4N-0775 [2] DOWEL-HOLLOW  
5. 8L-6565 [1] PIN-SPRING  
6. 9S-4160 [2] BUSHING  
7. 4M-1474 [4] PIN-LIFTER GUIDE  
8. 9L-9766 [2] PIN-PLUNGER LIFT  
9. 6N-8441 [2] BUSHING  
10. 4N-0899 [1] DOWEL-HOLLOW  
11. 1P-0232 [8] BALL  
  1P-0234 [8] DOWEL  
12. 4N-0952 C [1] PLUG-CUP  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP15130184
 

4W-7018: INJECTOR GP-FUEL

4W-7018 INJECTOR GP-FUEL
S/N 28V4774-UP
PART OF 4W-6310 LINES GP-FUEL INJECTION
i00107977 SEBP1513
4W7018 INJECTOR GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3408 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-9098 [1] SEAL-CARBON STOP  
2. 7W-4482 [1] WASHER (17.14X9.76X3.18-MM THK)  
3. 271-2489 [1] SEAL-WASHER  
4. 9X-2836 [1] SCREW-BUTTON HEAD  
5. 114-3362 [1] SEAL-O-RING  
6. 1W-8791 [1] TIP AS-FUEL INJECTOR  
 

#SEBP15130185
 

7W-1075: LINES GP-FUEL FILTER

7W-1075 LINES GP-FUEL FILTER
S/N 28V4756-4770
i00431501 SEBP1513
7W1075 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3408 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1591 [1] BOLT (3/8-16X1.5-IN)  
2. 1D-4717 [2] NUT (3/8-16-THD)  
3. 5M-2894 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 9S-4182 [1] PLUG (7/16-20-THD)  
5. 0S-1571 [1] BOLT (3/8-16X1.75-IN)  
6. 2P-7214 [1] ADAPTER-ELBOW  
7. 030-7947 [2] ADAPTER-ELBOW  
8. 3J-1907 [5] SEAL-O-RING  
9. 9L-5158 I [1] HOSE AS  
10. 9M-8406 [1] CLIP (LOOP)  
11. 4W-1968 [1] DAMPER-SURGE  
12. 6V-8349 [1] TEE-O-RING PORT  
13. 3J-7354 [3] SEAL-O-RING  
14. 030-7961 [1] ELBOW  
15. 9N-3040 I [1] HOSE AS  
16. 5P-4653 [1] CONNECTOR  
17. 5P-6941 [1] CONNECTOR  
18. 5B-3254 [1] NUT-JAM (7/16-20-THD)  
19. 2P-1279 [1] LOCKNUT (9/16-18-THD)  
20. 0L-1351 [1] BOLT (3/8-16X0.875-IN)  
21. 9N-3039 [1] BRACKET  
22. 6K-0806 [2] STRAP-CABLE  
23. 9N-3041 I [1] HOSE AS  
24. 2R-6806 [1] CONNECTOR  
25. 9N-2606 [1] BRACKET  
26. 0S-1594 [2] BOLT (3/8-16X1-IN)  
27. 9N-0965 [1] BRACKET AS-FILTER  
28. 030-7942 [1] ELBOW  
29. 9L-6958 I [1] HOSE AS  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP15130186
 

7W-1075: LINES GP-FUEL FILTER

7W-1075 LINES GP-FUEL FILTER
S/N 28V4771-UP
i00431503 SEBP1513
7W1075 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3408 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1591 [1] BOLT (3/8-16X1.5-IN)  
2. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
3. 5M-2894 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 9S-4182 [1] PLUG (7/16-20-THD)  
5. 0S-1571 [1] BOLT (3/8-16X1.75-IN)  
6. 2P-7214 [1] ADAPTER-ELBOW  
7. 030-7947 [2] ADAPTER-ELBOW  
8. 214-7568 [5] SEAL-O-RING  
9. 9L-5158 I [1] HOSE AS  
10. 9M-8406 [1] CLIP (LOOP)  
11. 4W-1968 [1] DAMPER-SURGE  
12. 6V-8349 [1] TEE-O-RING PORT  
13. 9X-7378 [3] SEAL-O-RING  
14. 030-7961 [1] ELBOW  
15. 9N-3040 I [1] HOSE AS  
16. 5P-8869 [1] CONNECTOR  
17. 5D-9231 [1] CONNECTOR  
18. 6V-7383 [1] CLIP  
19. 8M-2773 [1] CLIP (LOOP)  
20. 030-7942 [1] ELBOW  
21. 9L-6958 I [1] HOSE AS  
22. 6K-0806 [2] STRAP-CABLE  
23. 9N-3041 I [1] HOSE AS  
24. 2R-6806 [1] CONNECTOR  
25. 9N-2606 [1] BRACKET  
26. 0S-1594 [2] BOLT (3/8-16X1-IN)  
27. 9N-0965 [1] BRACKET AS-FILTER  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP15130187
 

9L-6730: LINES GP-FUEL FILTER

9L-6730 LINES GP-FUEL FILTER
S/N 28V4750-4755
i00435439 SEBP1513
9L6730 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3408 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1591 [1] BOLT (3/8-16X1.5-IN)  
2. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
3. 5M-2894 [6] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 9S-4182 [1] PLUG (7/16-20-THD)  
  3J-7354 [1] SEAL-O-RING  
5. 0S-1571 C [1] BOLT (3/8-16X1.75-IN)  
6. 2P-7214 [1] ADAPTER-ELBOW  
7. 030-7947 [2] ADAPTER-ELBOW  
8. 3J-1907 [4] SEAL-O-RING  
9. 9L-5158 I [1] HOSE AS  
10. 9M-8406 [1] CLIP (LOOP)  
11. 9L-6492 [1] DAMPER-SURGE  
12. 030-9208 [1] TEE  
13. 5P-4837 [1] ADAPTER  
14. 9L-5125 [1] ELBOW  
15. 9N-3040 I [1] HOSE AS  
16. 5P-4653 C [1] CONNECTOR  
17. 5P-6941 [1] CONNECTOR  
18. 5B-3254 [1] NUT-JAM (7/16-20-THD)  
19. 2P-1279 [1] LOCKNUT (9/16-18-THD)  
20. 0L-1351 [1] BOLT (3/8-16X0.875-IN)  
21. 9N-3039 [1] BRACKET  
22. 6K-0806 [2] STRAP-CABLE  
23. 9N-3041 I [1] HOSE AS  
24. 2R-6806 [1] CONNECTOR  
25. 9N-2606 [1] BRACKET  
26. 0S-1594 [2] BOLT (3/8-16X1-IN)  
27. 9N-0965 [1] BRACKET AS-FILTER  
28. 9M-6527 [1] WASHER-HARD (10.2X25.5X5-MM THK)  
29. 9L-6958 I [1] HOSE AS  
30. 030-7942 [1] ELBOW  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP15130188
 

4W-6310: LINES GP-FUEL INJECTION

4W-6310 LINES GP-FUEL INJECTION
S/N 28V4774-4929
i00107970 SEBP1513
4W6310 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3408 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-7429 Y [1] LINES GP-FUEL INJECTION  
2. 0S-1591 [4] BOLT (3/8-16X1.5-IN)  
3. 4W-7018 Y [8] INJECTOR GP-FUEL  
4. 6N-2944 [2] PLUG  
5. 7W-2315 [8] RETAINER  
6. 7C-5570 [8] LINE AS-FUEL INJECTION  
7. 5B-1484 [8] NUT (3/4-10-THD)  
8. 5P-8119 [8] SEAL-O-RING  
9. 1S-0004 [2] SEAL-O-RING  
10. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  068-8438 [4] SPACER (11.12X19.05X7.9-MM THK)  
11. 6V-4314 [1] SEAL-O-RING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15130189
 

4W-6310: LINES GP-FUEL INJECTION

4W-6310 LINES GP-FUEL INJECTION
S/N 28V4930-UP
i00194302 SEBP1513
4W6310 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3408 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0030 CY [1] LINES GP-FUEL INJECTION  
2. 0S-1591 [4] BOLT (3/8-16X1.5-IN)  
3. 4W-7018 CY [8] INJECTOR GP-FUEL  
4. 6V-4314 [1] SEAL-O-RING  
5. 7W-2315 [8] RETAINER  
6. 9Y-3969 C [8] LINE AS-FUEL INJECTION  
    (EACH INCLUDES)
  8L-2779 [1] SEAL-O-RING  
7. 5B-1484 [8] NUT (3/4-10-THD)  
8. 5P-8119 [8] SEAL-O-RING  
9. 1S-0004 [2] SEAL-O-RING  
10. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  068-8438 [4] SPACER (11.12X19.05X7.9-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
Air System Leakage Can Cause Problems With Engine Governor Stability At Low Idle Rpm
1981/07/07
Part Number For Fuel Injection Pump Group In New Location
1981/11/13
New Idler Shaft Used In Fuel Transfer Pumps
1982/02/17
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine
1982/03/31
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/09/01
Changes In Engine Rpm; Governor Does Not Operate Correctly
1982/10/27
Changes In Engine Rpm; Governor Does Not Operate Correctly
1983/01/26
Improved Governor Control Shaft And Seal Will Help Prevent Oil Leakage
1983/10/05
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/23
New Seal For Fuel Injection Pump Housing Is More Resistant To Heat Damage
1984/05/23
Governor Flyweight Shield No Longer Used In New Scroll Fuel Systems
1985/01/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Fuel Injection Pump Barrel Sealing Face Reconditioning{1251}
1996/03/27
Engine News
Special Bolts Available For Better Protection Against Modifications Of Fuel System And Governor Settings
1980/09/10
New Spring Used In Fuel Ratio Control
1977/03/15
New 5P4185 Fuel Pump Timing Pin To Be Used Only On 3408 And 3412 Engines
1977/05/13
Improvements To Fuel Injection Pump And Governor
1977/06/08
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Fuel Transfer Pump Shaft With Chromium Plate
1977/10/12
Change In Design Of Engine Governor, Fuel Injection And Transfer Pump Groups, And Fuel Ratio Control Groups
1978/02/08
Design Of Governor Control Linkage Changed; Less Force Is Needed To Move The Accelerator Pedal
1978/02/08
Correct Adjustment Of The Governor Control Linkage In Truck Engines Is Necessary To Prevent Low Power
1978/04/05
O-Ring Seals Of A Different Material Are Now Used On The Outside Diameter Of The Servo Cylinder In Governors
1978/05/03
One-Piece Seat Used For Governor Spring
1978/05/03
Different O-Ring Seals Now Used In Fuel Injection Pump Group
1978/08/30
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}
Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Installation Of 6N6193 Governor Adapter Plate Service Group{1264}
Installation Of 6N6193 Governor Adapter Plate Service Group{1264}
Installation Of 4N779 And 7N6124 Fuel Injection Pump Housing Assemblies Or Fuel Injection Pump Groups{1251, 1253}
Installation Of 4N779 And 7N6124 Fuel Injection Pump Housing Assemblies Or Fuel Injection Pump Groups{1251, 1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Fuel Injection Pump
3408 & 3408B DIESEL TRUCK ENGINE
Governor
3408 & 3408B DIESEL TRUCK ENGINE
Fuel Injection Pump Housing
3408 & 3408B DIESEL TRUCK ENGINE
Governor Drive And Oil Pump
3408 & 3408B DIESEL TRUCK ENGINE
Fuel Transfer Pump
3408 & 3408B DIESEL TRUCK ENGINE
Fuel Transfer Pump Drive
3408 & 3408B DIESEL TRUCK ENGINE
Governor Control Linkage
3408 & 3408B DIESEL TRUCK ENGINE
Automatic Timing Advance Unit (4N677, 6N3195 And 9N3959)
3408 & 3408B DIESEL TRUCK ENGINE
Disassembly and Assembly
Fuel Transfer Pump
3408 & 3408B DIESEL TRUCK ENGINE
Governor (Earlier)
3408 & 3408B DIESEL TRUCK ENGINE
Governor (Later)
3408 & 3408B DIESEL TRUCK ENGINE
Governor (Earlier)
3408 & 3408B DIESEL TRUCK ENGINE
Governor (Later)
3408 & 3408B DIESEL TRUCK ENGINE
Fuel Injection Pump Housing And Governor
3408 & 3408B DIESEL TRUCK ENGINE
Fuel Injection Pumps
3408 & 3408B DIESEL TRUCK ENGINE
Fuel Injection Pump Housing
3408 & 3408B DIESEL TRUCK ENGINE
Automatic Timing Advance
3408 & 3408B DIESEL TRUCK ENGINE
Service Magazine
Modification Of 5P1768 Pointer Assembly Necessary For Use On Some Fuel Injection Pump Housings{1253,0653}
1980/03/31
Kysor Air-Operated Shutdown Actuators For 3406, 3408, 1693 Truck Engines{7400,1265}
1980/06/30
Special Bolts Available For Better Protection Against Modifications Of Fuel System And Governor Settings{1264,1278}
1980/08/25
Kysor Air-Operated Shutdown Actuators For 3406, 3408, 1693 Truck Engines{7400,1265}
1980/11/03
Air System Leakage Can Cause Problems With Engine Governor Stability At Low Idle RPM{1264,1803}
1981/05/25
Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24
Use Only EPA-Approved Rack And Idle Setting; Change Seal, Date Plate{1257,1251,1264}
1981/09/21
Part Number For Fuel Injection Pump Group In New Location{1253,1286}
1981/11/09
New Idler Shaft Used In Fuel Transfer Pumps{1256}
1982/02/22
Fuel Rack Slots Have Improved Wear Resistance{1257}
1982/05/10
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Changes In Engine RPM; Governor Does Not Operate Correctly{1264}
1982/10/18
Changes In Engine RPM; Governor Does Not Operate Correctly{1264}
1983/01/10
New Specification For Clearance Between Fuel Rack Slot And Cross Link{1257}
1983/05/16
Improved Governor Control Shaft And Seal Will Help Prevent Oil Leakage{1265}
1983/07/04
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Procedure To Remove Sharp Edges From Fuel Racks {1257,1253}
1984/02/06
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Cross Link Between Fuel Racks Has Smoother Surface{1250,1257}
1985/03/11
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Steel Fuel Pump Lifter Used{1250,1251}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Spring Used In Fuel Ratio Control{1278}
1977/03/21
Improvements To Fuel Injection Pump And Governor{1286}
1977/06/06
Fuel Transfer Pump Shaft With Chromium Plate{1256}
1977/10/10
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Design Of Governor Control Linkage Changed; Less Force Is Needed To Move The Accelerator Pedal{1265,1269}
1978/01/23
Change In Design Of Engine Governor, Fuel Injection And Transfer Pump Groups, And Fuel Ratio Control Groups{1264,1278,1286}
1978/01/23
Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
Correct Adjustment Of The Governor Control Linkage In Truck Engines Is Necessary To Prevent Low Power{1265,1269}
1978/03/27
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
O-Ring Seals Of A Different Material Are Now Used On The Outside Diameter Of The Servo Cylinder In Governors{1264}
1978/05/01
Different O-Ring Seals Now Used In Fuel Injection Pump Group{1251}
1978/08/28
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
New Throttle Shaft Bearing Sleeves Used In Governor Housing Assembly{1365}
1990/07/30
Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups{1251,1253}
1991/05/20
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
Improved Governor Servo Components Available For Use With Energize To Run Solenoids; Energize To Run Solenoid Stop Bolt Adjustment Procedure{1264,1259}
1996/06/03

Caterpillar Parts SIS Catalog 3408 :

FILTER GP-FUEL
8H-7204 FILTER GP-FUEL
FILTER GP-FUEL
4N-1981 FILTER GP-FUEL
FASTENER GP-FUEL INJ PUMP
9Y-3336 FASTENER GP-FUEL INJ PUMP
DRIVE GP-TACHOMETER
9N-0016 DRIVE GP-TACHOMETER
DRIVE GP-GOVERNOR & FUEL PUMP
9N-3959 DRIVE GP-GOVERNOR & FUEL PUMP
CONTROL GP-GOVERNOR
9N-1822 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
9L-6861 CONTROL GP-GOVERNOR
CONTROL GP-FUEL RATIO
9N-6359 CONTROL GP-FUEL RATIO
GOVERNOR GP
4W-7375 GOVERNOR GP
GOVERNOR GP
7N-6271 GOVERNOR GP
HOUSING GP-FUEL PUMP
7N-4574 HOUSING GP-FUEL PUMP
INJECTOR GP-FUEL
4W-7018 INJECTOR GP-FUEL
LINES GP-FUEL FILTER
7W-1075 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
7W-1075 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
9L-6730 LINES GP-FUEL FILTER
LINES GP-FUEL INJECTION
4W-6310 LINES GP-FUEL INJECTION

Truck sale:

Caterpillar 3408 IND, Construction
45,000 
Caterpillar 3408 IND, Construction
- Industrial engines
LOUISIANA CAT POWER SYSTEMS
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.