IT28 INTEGRATED TOOLCARRIER 2KC00001-UP (MACHINE) POWERED BY 3204 ENGINE HYDRAULIC SYSTEM Caterpillar SIS




INTEGRATED TOOLCARRIER IT28 INTEGRATED TOOLCARRIER 2KC
 IT28 INTEGRATED TOOLCARRIER 2KC00001-UP (MACHINE) POWERED BY 3204 ENGINE SEBP1514 IT28 2KC   (1985)

Parts group IT28:

  For full view, you need register
HYDRAULIC SYSTEM
COOLER GP
9C-2293 COOLER AR-HYDRAULIC OIL
9C2293 COOLER AR-HYDRAULIC OIL
AN ATTACHMENT
9V-1798 COOLER AR-HYDRAULIC OIL
9V1798 COOLER AR=HYDRAULIC OIL
REPLACED BY 9C2293-PAGE 193
AN ATTACHMENT
CYLINDER GP
CYLINDER & MOUNTING GP
3V-6286 CYLINDER & MOUNTING GP
3V6286 MOUNTING AND CYLINDER GROUP
3V6329-PAGE 219
8V-9684 CYLINDER & SEAL GP
8V9684 SEAL & CYLINDER GROUP-TILT-(2 REQUIRED)
CYLINDER & SEAL GP
3V-6329 CYLINDER & SEAL GP
3V6329 CYLINDER & SEAL GROUP
3G3501-PAGE 218
PART OF 3V6286 MOUNTING AND CYLINDER
CYLINDER & SEAL GP-LIFT
3V-6318 CYLINDER & SEAL GP-LIFT
3V6318 CYLINDER & SEAL GROUP-LIFT-(2 REQUIRED)
3G2991-PAGE 221
CYLINDER GP-LIFT
3G-2991 CYLINDER GP-LIFT
3G2991 CYLINDER GP-LIFT-(CHG. 04)
S/N 2KC1-1144, 1173-1179
120.65 MM (4.75 IN.) BORE X 675 MM (26.05 IN.) STROKE
PART OF 3V6318 CYLINDER & SEAL
CYLINDER GP-LIFT
3G-2991 CYLINDER GP-LIFT
3G2991 CYLINDER GP-LIFT-(CHG. 06)
S/N 2KC1145-1172, 1180-UP
120.65 MM (4.75 IN.) BORE X 675 MM (26.05 IN.) STROKE
PART OF 3V6318 CYLINDER & SEAL
CYLINDER GP-TILT
4T-5545 CYLINDER GP-TILT
4T5545 CYLINDER GROUP-TILT-(CHG. 01)
107.95 MM(4.25 IN.) BORE X 726 MM(28.6 IN.) STROKE
PART OF 8V9684 SEAL & CYLINDER
CYLINDER & MOUNTING GP
9V-8921 CYLINDER & MOUNTING GP
9V8921 MOUNTING AND CYLINDER GP-QUICK COUPLER
9T2352-PAGE 223.01
CYLINDER GP-PIN COUPLER
9T-2352 CYLINDER GP-PIN COUPLER
9T2352 CYLINDER GP-(CHG. 00)
50.8 MM(2 IN.) BORE X 79 MM(3.11 IN.) STROKE
PART OF 9V8921 MOUNTING AND CYLINDER
AN ATTACHMENT
KICKOUT & POSITIONER GP
KICKOUT & POSITIONER GP
8V-9692 KICKOUT & POSITIONER GP
8V9692 POSITIONER & KICKOUT GP
S/N 2KC1-818
KICKOUT & POSITIONER GP
8V-9692 KICKOUT & POSITIONER GP
8V9692 POSITIONER & KICKOUT GP
S/N 2KC819-UP
LINES GP-CYLINDER
LINES GP-TILT CYLINDER
8V-9686 LINES GP-TILT CYLINDER
8V9686 TILT CYLINDER LINES GROUP-PART 1 OF 2
LINES GP-TILT CYLINDER
8V-9686 LINES GP-TILT CYLINDER
8V9686 TILT CYLINDER LINES GROUP-PART 2 OF 2
LINES GP-LIFT CYLINDER
8V-9688 LINES GP-LIFT CYLINDER
8V9688 LINES GP-LIFT CYLINDER
S/N 2KC1-875
LINES GP-LIFT CYLINDER
8V-9688 LINES GP-LIFT CYLINDER
8V9688 LINES GP-LIFT CYLINDER
S/N 2KC876-UP
LINES GP-FRONT
LINES GP-FRONT
9V-8924 LINES GP-FRONT
9V8924 FRONT LINES GROUP-PART 1 OF 3
FOR USE WITH HYDRAULIC OIL LINES GROUP (3RD VALVE)
AN ATTACHMENT
LINES GP-FRONT
9V-8924 LINES GP-FRONT
9V8924 FRONT LINES GROUP-PART 2 OF 3
7N8000-PAGE 288
FOR USE WITH HYDRAULIC OIL LINES GROUP (3RD VALVE)
AN ATTACHMENT
LINES GP-FRONT
9V-8924 LINES GP-FRONT
9V8924 FRONT LINES GROUP-PART 3 OF 3
4T5541-PAGE 208
FOR USE WITH HYDRAULIC OIL LINES GROUP (3RD VALVE)
AN ATTACHMENT
LINES GP-FRONT
9V-1797 LINES GP-FRONT
9V1797 LINES GP-FRONT-PART 1 OF 4
S/N 2KC1-987
7N8000-PAGE 288
AN ATTACHMENT
LINES GP-FRONT
9V-1797 LINES GP-FRONT
9V1797 FRONT LINES GP- PART 2 OF 4
S/N 2KC1-987
AN ATTACHMENT
LINES GP-FRONT
9V-1797 LINES GP-FRONT
9V1797 FRONT LINES GP- PART 3 OF 4
S/N 2KC1-987
AN ATTACHMENT
LINES GP-FRONT
9V-1797 LINES GP-FRONT
9V1797 FRONT LINES GP- PART 4 OF 4
S/N 2KC1-987
4T5541-PAGE 208
AN ATTACHMENT
LINES GP-FRONT
6W-9681 LINES GP-FRONT
6W9681 LINES GP-FRONT- PART 1 OF 4
REPLACED BY 6W7748-PAGE 203.00.09-S/N 2KC988-UP
7N8000-PAGE 288
AN ATTACHMENT
LINES GP-FRONT
6W-9681 LINES GP-FRONT
6W9681 LINES GP-FRONT- PART 2 OF 4
REPLACED BY 6W7748-PAGE 203.00.09-S/N 2KC988-UP
AN ATTACHMENT
LINES GP-FRONT
6W-9681 LINES GP-FRONT
6W9681 LINES GP-FRONT- PART 3 OF 4
REPLACED BY 6W7748-PAGE 203.00.09-S/N 2KC988-UP
AN ATTACHMENT
LINES GP-FRONT
6W-9681 LINES GP-FRONT
6W9681 LINES GP-FRONT- PART 4 OF 4
REPLACED BY 6W7748-PAGE 203.00.09-S/N 2KC988-UP
4T5541-PAGE 208
AN ATTACHMENT
LINES GP-FRONT
6W-7748 LINES GP-FRONT
6W7748 LINES GP-FRONT-PART 1 OF 4
4TH FUNCTION-S/N 2KC988-UP
7N8000-PAGE 288. AN ATTACHMENT
LINES GP-FRONT
6W-7748 LINES GP-FRONT
6W7748 LINES GP-FRONT-PART 2 OF 4
4TH FUNCTION-S/N 2KC988-UP
AN ATTACHMENT
LINES GP-FRONT
6W-7748 LINES GP-FRONT
6W7748 LINES GP-FRONT-PART 3 OF 4
4TH FUNCTION-S/N 2KC988-UP
AN ATTACHMENT
LINES GP-FRONT
6W-7748 LINES GP-FRONT
6W7748 LINES GP-FRONT-PART 4 OF 4
4TH FUNCTION-S/N 2KC988-UP
AN ATTACHMENT
LINES GP-FRONT
8V-9695 LINES GP-FRONT
8V9695 LINES GP-FRONT- PART 1 OF 3
THIRD VALVE, S/N 2KC1-779,781-864 & 866
LINES GP-FRONT
8V-9695 LINES GP-FRONT
8V9695 LINES GP-FRONT- PART 2 OF 3
THIRD VALVE, S/N 2KC1-779,781-864 & 866
LINES GP-FRONT
8V-9695 LINES GP-FRONT
8V9695 LINES GP-FRONT- PART 3 OF 3
THIRD VALVE, S/N 2KC1-779,781-864 & 866
LINES GP-FRONT
8V-9695 LINES GP-FRONT
8V9695 LINES GP-FRONT-3RD VALVE-PART 1 OF 3
S/N 2KC780, 865, 867-987
LINES GP-FRONT
8V-9695 LINES GP-FRONT
8V9695 LINES GP-FRONT-3RD VALVE-PART 2 OF 3
S/N 2KC780, 865, 867-987
LINES GP-FRONT
8V-9695 LINES GP-FRONT
8V9695 LINES GP-FRONT-3RD VALVE-PART 3 OF 3
S/N 2KC780, 865, 867-987
LINES GP-FRONT
8V-9695 LINES GP-FRONT
8V9695 LINES GP-FRONT-3RD VALVE-PART 1 OF 3
S/N 2KC988-UP
LINES GP-FRONT
8V-9695 LINES GP-FRONT
8V9695 LINES GP-FRONT-3RD VALVE-PART 2 OF 3
S/N 2KC988
LINES GP-FRONT
8V-9695 LINES GP-FRONT
8V9695 LINES GP-FRONT-3RD VALVE-PART 3 OF 3
S/N 2KC988
LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
8V-7418 LINES GP-HYDRAULIC
8V7418 HYDRAULIC OIL LINES GROUP-THREE VALVE
AN ATTACHMENT
LOCK GP
LOCK GP-HYDRAULIC HAND CONTROL
8V-1156 LOCK GP-HYDRAULIC HAND CONTROL
8V1156 HYDRAULIC HAND CONTROL LOCK GROUP-3 LEVER
FOR USE WITH MECHANICAL HYDRAULIC CONTROL GROUP
AN ATTACHMENT
LOCK GP-HYDRAULIC HAND CONTROL
9C-1439 LOCK GP-HYDRAULIC HAND CONTROL
9C1439 LOCK GP-HYDRAULIC HAND CONTROL
AN ATTACHMENT
PUMP GP
PUMP GP-VANE
4V-6514 PUMP GP-VANE
4V6514 VANE PUMP GROUP-DOUBLE
3G5918-PAGE 205
PUMP GP-VANE
3G-5918 PUMP GP-VANE
3G5918 VANE PUMP GROUP
1U2665,1U2668-PAGE 206
PART OF 4V6514 VANE PUMP
CARTRIDGE GP
1U-2668 CARTRIDGE GP
1U2668 CARTRIDGE GROUP-79 LITERE PER MINUTE (21 GPM)-FRONT*R
PART OF 3G5918 VANE PUMP
CARTRIDGE GP
1U-2665 CARTRIDGE GP
1U2665 CARTRIDGE GROUP-53 LITER PER MINUTE (14 GPM) REAR*R
PART OF 3G5918 VANE PUMP
TANK GP
MOUNTING GP-HYDRAULIC TANK
8V-4502 MOUNTING GP-HYDRAULIC TANK
8V4502 HYDRAULIC TANK MOUNTING GROUP
TANK & FILTER GP
4T-0489 TANK & FILTER GP
4T0489 FILTER & TANK GROUP-HYDRAULIC-PART 1 OF 2
TANK & FILTER GP
4T-0489 TANK & FILTER GP
4T0489 FILTER & TANK GROUP-HYDRAULIC-PART 2 OF 2
VALVE GP
VALVE & MOUNTING GP
9V-2864 VALVE & MOUNTING GP
9V2864 MOUNTING & VALVE GROUP
4T5869-PAGE 214.02
VALVE GP-CHECK
VALVE GP-CHECK
4T-5896 VALVE GP-CHECK
4T5896 VALVE GROUP-CHECK
PART OF 9T1617 VALVE
VALVE GP-CHECK
4T-7002 VALVE GP-CHECK
4T7002 VALVE GP-CHECK & RELIEF
PART OF 4T5866 & 9T0982 VALVE-CONTROL
VALVE GP-CHECK & RELIEF
4T-0947 VALVE GP-CHECK & RELIEF
4T0947 VALVE GP-CHECK AND RELIEF
PART OF 9T0982 VALVE-CONTROL
VALVE GP-CONTROL
VALVE GP
4T-5008 VALVE GP
4T5008 VALVE GROUP
4T5007-PAGE 212. PART OF 9T1617 VALVE
FIELD REPLACEMENT FOR 4T5007 SHOWN ON PAGE 212
VALVE GP
4T-5006 VALVE GP
4T5006 VALVE GROUP-SHIFTING
PART OF 9T1617 VALVE
VALVE GP
4T-5007 VALVE GP
4T5007 VALVE GROUP
PART OF 4T5008 VALVE
FOR FIELD REPLACEMENT ORDER 4T5008-PAGE 211
VALVE GP
9T-0491 VALVE GP
9T0491 RELIEF VALVE GROUP-PILOT OPERATED
PART OF 4T5866 TILT CONTROL VALVE
VALVE GP
4T-1040 VALVE GP
4T1040 VALVE GROUP
PART OF 4T1039 MAIN RELIEF VALVE
VALVE GP-CONTROL
4T-5866 VALVE GP-CONTROL
4T5866 TILT CONTROL VALVE GROUP
9T0491-PAGE 213,4T7002-PAGE 214.04,4T1860-PAGE 217,4T1022-PAGE 228.02
PART OF 4T5869 VALVES
VALVE GP
4T-5869 VALVE GP
4T5869 LIFT,TILT,COUPLER,INLET FLOW CONTROL & RELIEF VALVE GROUP
9T1617-PAGE 210,4T5866-PAGE 214.01,9T0982-PAGE 214.03,9T0211-PAGE 215
PART OF 9V2864 MOUNTING AND VALVE
VALVE GP-CONTROL
9T-0982 VALVE GP-CONTROL
9T0982 VALVE GP-CONTROL
4T7002-PAGE 214.04, 4T0947-PAGE 216
4T1860-PAGE 217 & 4T1022-PAGE 228.02
PART OF 4T5869 VALVE
VALVE GP-CONTROL
9T-0211 VALVE GP-CONTROL
9T0211 VALVE GP-LIFT CONTROL
4T1860-PAGE 217, 4T1002-PAGE 228.02
PART OF 4T5869 VALVE
LEVER GP
4T-1022 LEVER GP
4T1022 LEVER GP
TYPE 2
PART OF 4T5866, 9T0982 & 9T0211 VALVES
LEVER GP
4T-1022 LEVER GP
4T1022 LEVER GP
TYPE 1
PART OF 4T5866, 9T0982 & 9T0211 VALVES
VALVE GP-DIVERTER
VALVE GP-DIVERTER
4T-5541 VALVE GP-DIVERTER
4T5541 DIVERTER VALVE GROUP-FRONT LINES
6T5859-PAGE 208
PART OF 9V8924,9V1797,6W9681 & 6W7748 LINES
AN ATTACHMENT
VALVE GP-FLOW CONTROL
VALVE GP-FLOW CONTROL
9T-1617 VALVE GP-FLOW CONTROL
9T1617 VALVE GROUP-INLET FLOW CONTROL & RELIEF
4T5006, 4T5008-PAGE 211, 4T1039-PAGE 212, 4T1008-PAGE 213.01,
4T5896-PAGE 213.02. PART OF 4T5869 VALVE
VALVE GP-RELIEF
VALVE GP-RELIEF
4T-1039 VALVE GP-RELIEF
4T1039 VALVE GROUP-MAIN RELIEF-PILOT OPERATED
4T1040-PAGE 213
PART OF 9T1617 VALVE
VALVE GP-RELIEF
4T-1008 VALVE GP-RELIEF
4T1008 VALVE GROUP-RELIEF
PART OF 9T1617 VALVE
VALVE GP-CHECK & RELIEF
4T-0947 VALVE GP-CHECK & RELIEF
4T0947 VALVE GP-CHECK AND RELIEF
PART OF 9T0982 VALVE-CONTROL
VALVE GP-SHUTTLE
VALVE GP-SHUTTLE
4T-1860 VALVE GP-SHUTTLE
4T1860 SHUTTLE VALVE GROUP
PART OF 9T0211 LIFT CONTROL VALVE, 4T5866 TILT CONTROL VALVE &
9T0982 COUPLER CONTROL VALVE
VALVE GP-SOLENOID
VALVE GP-SOLENOID
6T-5859 VALVE GP-SOLENOID
6T5859 SOLENOID VALVE GROUP-DIVERTER
PART OF 4T5541 DIVERTER VALVE
AN ATTACHMENT

Information:

(For parts list, see above)

Special Instruction
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Tool Operating Manual
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
Service Magazine
The Accumulator Discharging and Charging Procedures are Updated {5077}
The Accumulator Discharging and Charging Procedures are Updated {5077}
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Special Instruction
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Installation Of 7W1762, 9N5233 And 9N3586 Oil Cooler Core Assemblies{1378}
Installation Of 7W1762, 9N5233 And 9N3586 Oil Cooler Core Assemblies{1378}
Disassembly and Assembly
Hydraulic Oil Cooler (IT28 & IT28B)
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Service Magazine
Canister Size Of Coolant Conditioner Element Has Changed{1350}
1985/11/25
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Easy Five-Minute Coolant Conditioner Test With 8T5296 Coolant Conditioner Test Kit{1395,0786}
1987/03/23
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Improved Seals Used; Seal Replacement In Folded Core Radiators {1353}
1988/05/09
New Publication Available-"Coolant And Your Engine"{1395,0374,0375}
1989/02/13
Engine Coolant Can Be Recycled{1395}
1989/11/13
Multiple Row Modules Available To Replace Folded Core Radiators {1353,1374,7320}
1990/08/20
Correct Positioning Of Multiple Row Modules When Replacing Folded Core Radiators {1353}
1990/08/20
Caterpillar Introduces New Long Life Heavy Duty Engine Coolant{1395}
1994/09/19
Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784}
2004/12/27
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Makeup And Relief Valve For Rod End Of Coupler Cylinder<BR> (4T947)
IT28 & IT28B INTEGRATED TOOLCARRIER SERVICE MANUAL
Makeup And Relief Valve For Head End Of Coupler, Tilt And Attachment Cylinders<BR> (4T7002)
IT28 & IT28B INTEGRATED TOOLCARRIER SERVICE MANUAL
Relief Valve For Rod End Of Tilt And Attachment Cylinders<BR> (9T5310)
IT28 & IT28B INTEGRATED TOOLCARRIER SERVICE MANUAL
Coupler Cylinder<BR> (9T2352)
IT28 & IT28B INTEGRATED TOOLCARRIER SERVICE MANUAL
Attachment Coupler Cylinder<BR> (4T5544)
IT28 & IT28B INTEGRATED TOOLCARRIER SERVICE MANUAL
Cylinder Mounting Group<BR> (9V8921)
IT28 & IT28B INTEGRATED TOOLCARRIER SERVICE MANUAL
Makeup And Relief Valve For Rod End Of Coupler Cylinder<BR> 4T947
IT28 & IT28B INTEGRATED TOOLCARRIERS HYDRAULIC SYSTEM
Makeup And Relief Valve For Head End Of Coupler, Tilt And Attachment Cylinders<BR> 4T7002
IT28 & IT28B INTEGRATED TOOLCARRIERS HYDRAULIC SYSTEM
Relief Valve For Rod End Of Tilt And Attachment Cylinders
IT28 & IT28B INTEGRATED TOOLCARRIERS HYDRAULIC SYSTEM
Lift Cylinders<BR> 3G2991
IT28 & IT28B INTEGRATED TOOLCARRIERS HYDRAULIC SYSTEM
Tilt Cylinders<BR> 4T5545
IT28 & IT28B INTEGRATED TOOLCARRIERS HYDRAULIC SYSTEM
Coupler Cylinder<BR> 4T9981 (earlier) 9T2352 (later)
IT28 & IT28B INTEGRATED TOOLCARRIERS HYDRAULIC SYSTEM
Attachment Coupler Cylinder<BR> 4T5544
IT28 & IT28B INTEGRATED TOOLCARRIERS HYDRAULIC SYSTEM
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Coupler Cylinder (Quick)
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Tilt Cylinders
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Lift Cylinders
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Cylinders (Lift, Tilt, &amp; Steering)
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Service Magazine
Spacer Blocks And Shims Improve Rod Retention And Pin Alignment Of Coupler Cylinder {6129,5133}
1990/11/12
New Cylinder Group Available For Quick Coupler And Mounting Group{6129,5133}
1991/01/07
New Quick Coupler Cylinder Groups Contain Components To Prevent Piston/Rod Nuts From Becoming Loose{6129,5133}
1991/12/02
New Quick Coupler Cylinder Rods Require A Drilled Hole To Secure Spring Retaining Pin{6129,5133}
1992/06/01
Implement Retainer Pin Holes May Not Align With Quick Coupler Holes; Coupler Cylinder Piston Rods May Damage Implement Retainer Pin Mounting Holes{6129,5133}
1992/06/01
New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
2002/07/01
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2002/04/08
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Oversize Fuel Pump Drive Idler Shaft Available To Salvage Cylinder Block{1206}
1994/10/03
Special Instruction
Instructions For 3208 Engine Oil Filter Base Installation{1306}
Instructions For 3208 Engine Oil Filter Base Installation{1306}
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Tool Operating Manual
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
Two New Oil Filter Assemblies Available; Always Use Correct Oil Filter And Follow Caterpillar Change Intervals{1318}
1981/02/23
Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
A Replacement Filter Is Incorrectly Identified {5050, 5068}
2002/12/23
Optional High Efficiency Filters Are Now Available {3004, 5068}
2003/07/07
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
Specifications
Lift Kickout Adjustment Procedure
IT28 & IT28B INTEGRATED TOOLCARRIER SERVICE MANUAL
Bucket Or Implement Positioner Adjustment Procedure
IT28 & IT28B INTEGRATED TOOLCARRIER SERVICE MANUAL
Lift Kickout Adjustment Procedure
IT28 & IT28B INTEGRATED TOOLCARRIERS HYDRAULIC SYSTEM
Bucket Or Implement Positioner Adjustment Procedure
IT28 & IT28B INTEGRATED TOOLCARRIERS HYDRAULIC SYSTEM
Disassembly and Assembly
Tilt Positioner Control (Kickout)
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Lift Positioner Control (Kickout)
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Service Magazine
Change To Bucket Positioner Adjustment Procedure Improves Operation{5112}
1985/08/19
Technical Information Bulletin
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Special Instruction
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Service Magazine
New Protective Caps For Hose Clamps Are Now Available {5057}
2001/11/19
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Information Release Memo, PELJ0481 , "Product Line Expansion for Caterpillar Low and Medium Pressure Hose and Coupling Products" {5057}
2005/02/21
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26
Contamination Control Guidelines
Procedure for &quot;Off-Board&quot; Filtering Backhoe Loader and Integrated Toolcarrier Hydraulic Oil Equipped with Auxiliary Lines{0680, 0768, 5050, 5056, 5057}
Procedure for "Off-Board" Filtering Backhoe Loader and Integrated Toolcarrier Hydraulic Oil Equipped with Auxiliary Lines{0680, 0768, 5050, 5056, 5057}
Service Magazine
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Disassembly and Assembly
Coupler Cylinder (Quick)
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Service Magazine
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Spacer Blocks And Shims Improve Rod Retention And Pin Alignment Of Coupler Cylinder {6129,5133}
1990/11/12
New Cylinder Group Available For Quick Coupler And Mounting Group{6129,5133}
1991/01/07
New Quick Coupler Cylinder Groups Contain Components To Prevent Piston/Rod Nuts From Becoming Loose{6129,5133}
1991/12/02
New Quick Coupler Cylinder Rods Require A Drilled Hole To Secure Spring Retaining Pin{6129,5133}
1992/06/01
Implement Retainer Pin Holes May Not Align With Quick Coupler Holes; Coupler Cylinder Piston Rods May Damage Implement Retainer Pin Mounting Holes{6129,5133}
1992/06/01
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Disassembly and Assembly
Tilt Cylinders
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Lift Cylinders
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Cylinders (Lift, Tilt, &amp; Steering)
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Service Magazine
Improved Brake Line To Front Axle{4257}
1987/05/25
Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Technical Information Bulletin
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Procedure for &quot;Off-Board&quot; Filtering Backhoe Loader and Integrated Toolcarrier Hydraulic Oil Equipped with Auxiliary Lines{0680, 0768, 5050, 5056, 5057}
Procedure for "Off-Board" Filtering Backhoe Loader and Integrated Toolcarrier Hydraulic Oil Equipped with Auxiliary Lines{0680, 0768, 5050, 5056, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Service Magazine
Improved Brake Line To Front Axle{4257}
1987/05/25
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13
Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Service Magazine
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Specifications
Hydraulic Pump For Implement and Steering<BR> 3g5918
IT28 & IT28B INTEGRATED TOOLCARRIERS STEERING SYSTEM
Supplemental Steering Pump<BR> 7J8199
IT28 & IT28B INTEGRATED TOOLCARRIERS STEERING SYSTEM
Hydraulic Pump For Implement And Steering<BR> 3G5918
IT28 & IT28B INTEGRATED TOOLCARRIERS HYDRAULIC SYSTEM
Hydraulic Tank And Filter<BR> 4T489 (earlier) 9T8367 (later)
IT28 & IT28B INTEGRATED TOOLCARRIERS HYDRAULIC SYSTEM
Hydraulic Tank Mounting Group<BR> 8V4502
IT28 & IT28B INTEGRATED TOOLCARRIERS HYDRAULIC SYSTEM
Inlet Valve Group<BR> (9T1617/9T5318)
IT28 & IT28B INTEGRATED TOOLCARRIERS HYDRAULIC SYSTEM
Tilt And Attachment Control Valve<BR> (4T5866/9T1450)
IT28 & IT28B INTEGRATED TOOLCARRIERS HYDRAULIC SYSTEM
Lift Control Valve<BR> 9T211
IT28 & IT28B INTEGRATED TOOLCARRIERS HYDRAULIC SYSTEM
Charging Valve<BR> 4T1008
IT28 & IT28B INTEGRATED TOOLCARRIERS HYDRAULIC SYSTEM
Attachment Coupler Cylinder<BR> 4T5544
IT28 & IT28B INTEGRATED TOOLCARRIERS HYDRAULIC SYSTEM
Implement Control Group
IT28 & IT28B INTEGRATED TOOLCARRIERS HYDRAULIC SYSTEM
Disassembly and Assembly
Coupler Cylinder (Quick)
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Tilt Positioner Control (Kickout)
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Lift Positioner Control (Kickout)
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Tilt Cylinders
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Lift Cylinders
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Cylinders (Lift, Tilt, &amp; Steering)
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Steering Flow Control &amp; Relief Valve (IT18 &amp; IT18B)
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Hydraulic Pump (Implement &amp; Steering) (IT28 &amp; IT28B)
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Hydraulic Pump (Implement &amp; Steering) (IT18 &amp; IT18B)
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Hydraulic Pump (Implement &amp; Steering)
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Supplemental Steering Pump (IT28 &amp; IT28B)
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Supplemental Steering Pump (IT18 &amp; IT18B)
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Hydraulic Tank
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Hydraulic Control Group
IT18 & IT28 INTEGRATED TOOLCARRIER OPERATOR'S STATION
Service Magazine
Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17
Change To Bucket Positioner Adjustment Procedure Improves Operation{5112}
1985/08/19
Canister Size Of Coolant Conditioner Element Has Changed{1350}
1985/11/25
Thread Lock Helps Prevent Oil Leakage At Lever Group Seals{5063}
1987/03/16
New Link And Shim Added To Mechanical Hydraulic Control Groups {5063}
1987/05/11
Spacer Blocks And Shims Improve Rod Retention And Pin Alignment Of Coupler Cylinder {6129,5133}
1990/11/12
New Cylinder Group Available For Quick Coupler And Mounting Group{6129,5133}
1991/01/07
New Hydraulic Pump Groups Help Prevent Oil Leaking From Weep Hole{5055}
1991/01/14
Adding Orifice To Inlet Manifold Eliminates Vibration In Pressure-Compensated Hydraulic Systems{5137}
1991/02/25
New Quick Coupler Cylinder Groups Contain Components To Prevent Piston/Rod Nuts From Becoming Loose{6129,5133}
1991/12/02
New Quick Coupler Cylinder Rods Require A Drilled Hole To Secure Spring Retaining Pin{6129,5133}
1992/06/01
Implement Retainer Pin Holes May Not Align With Quick Coupler Holes; Coupler Cylinder Piston Rods May Damage Implement Retainer Pin Mounting Holes{6129,5133}
1992/06/01
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications For Hydraulic Piston Pump And Motor Components {3083, 3203, 3221, 3222, 4351, 5058, 5069, 5070, 5117}
Specifications For Hydraulic Piston Pump And Motor Components {3083, 3203, 3221, 3222, 4351, 5058, 5069, 5070, 5117}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Special Instruction
Nexus Gear Pump Porting{5073}
Nexus Gear Pump Porting{5073}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Vane Type Hydraulic Pump Identification Guidelines {5055}
Vane Type Hydraulic Pump Identification Guidelines {5055}
Specifications
Hydraulic Pump For Implement and Steering<BR> 3g5918
IT28 & IT28B INTEGRATED TOOLCARRIERS STEERING SYSTEM
Supplemental Steering Pump<BR> 7J8199
IT28 & IT28B INTEGRATED TOOLCARRIERS STEERING SYSTEM
Hydraulic Pump For Implement And Steering<BR> 3G5918
IT28 & IT28B INTEGRATED TOOLCARRIERS HYDRAULIC SYSTEM
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Specifications For Hydraulic Piston Pump And Motor Components {3083, 3203, 3221, 3222, 4351, 5058, 5069, 5070, 5117}
Specifications For Hydraulic Piston Pump And Motor Components {3083, 3203, 3221, 3222, 4351, 5058, 5069, 5070, 5117}
Vane Type Hydraulic Pump Identification Guidelines {5055}
Vane Type Hydraulic Pump Identification Guidelines {5055}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}
Disassembly and Assembly
Oil Pump And Relief Valve
3204 VEHICULAR ENGINES
Hydraulic Pump (Implement &amp; Steering) (IT28 &amp; IT28B)
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Hydraulic Pump (Implement &amp; Steering) (IT18 &amp; IT18B)
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Hydraulic Pump (Implement &amp; Steering)
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Supplemental Steering Pump (IT28 &amp; IT28B)
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Supplemental Steering Pump (IT18 &amp; IT18B)
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Service Magazine
New Hydraulic Pump Groups Help Prevent Oil Leaking From Weep Hole{5055}
1991/01/14
Improved Analysis of Non-Warrantable Failures for Reman Vane Cartridges {5055}
2004/07/05
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25
The Serviceability of Metering Pumps Has Been Limited {4312}
2006/05/15
New Metering Pump Groups For Steering Control Prevent Oil Leaks {4300, 4301, 4312}
2010/01/27
Reuse And Salvage Guidelines
Universal Joints and Drive Shafts {3108, 3251, 3253}
Universal Joints and Drive Shafts {3108, 3251, 3253}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Special Instruction
Filtration Procedure for Wheel Loader, Landfill Compactor, Soil Compactor, and Integrated Toolcarrier Hydraulic Oil {0680, 0738, 0768, 5050, 5056}
Filtration Procedure for Wheel Loader, Landfill Compactor, Soil Compactor, and Integrated Toolcarrier Hydraulic Oil {0680, 0738, 0768, 5050, 5056}
Hydraulic System Cleanup Recommendations Following Catastrophic Component Failures on Wheel Loader Hydraulic Systems {0645, 0680, 0738, 0768, 5050, 5056, 5095}
Hydraulic System Cleanup Recommendations Following Catastrophic Component Failures on Wheel Loader Hydraulic Systems {0645, 0680, 0738, 0768, 5050, 5056, 5095}
Specifications
Hydraulic Tank And Filter<BR> 4T489 (earlier) 9T8367 (later)
IT28 & IT28B INTEGRATED TOOLCARRIERS HYDRAULIC SYSTEM
Hydraulic Tank Mounting Group<BR> 8V4502
IT28 & IT28B INTEGRATED TOOLCARRIERS HYDRAULIC SYSTEM
Tool Operating Manual
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Reuse And Salvage Guidelines
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Contamination Control Guidelines
Procedure for Filtering <NOBR> 9U-5000</NOBR> Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Procedure for Filtering 9U-5000 Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Filtration Procedure for Wheel Loader, Landfill Compactor, Soil Compactor, and Integrated Toolcarrier Hydraulic Oil {0680, 0738, 0768, 5050, 5056}
Filtration Procedure for Wheel Loader, Landfill Compactor, Soil Compactor, and Integrated Toolcarrier Hydraulic Oil {0680, 0738, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for &quot;Off-Board&quot; Filtering Backhoe Loader and Integrated Toolcarrier Hydraulic Oil Equipped with Auxiliary Lines{0680, 0768, 5050, 5056, 5057}
Procedure for "Off-Board" Filtering Backhoe Loader and Integrated Toolcarrier Hydraulic Oil Equipped with Auxiliary Lines{0680, 0768, 5050, 5056, 5057}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Disassembly and Assembly
Hydraulic Tank
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Service Magazine
Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
2004/03/29
A New Strainer Assembly For the Hydraulic Tank Is Now Available {5056, 5068}
2013/09/02
Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19
Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/01/23
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/01
Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050}
2010/10/01
Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/01
Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050}
2010/09/10
Special Instruction
Filtration Procedure for Wheel Loader, Landfill Compactor, Soil Compactor, and Integrated Toolcarrier Hydraulic Oil {0680, 0738, 0768, 5050, 5056}
Filtration Procedure for Wheel Loader, Landfill Compactor, Soil Compactor, and Integrated Toolcarrier Hydraulic Oil {0680, 0738, 0768, 5050, 5056}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Hydraulic System Cleanup Recommendations Following Catastrophic Component Failures on Wheel Loader Hydraulic Systems {0645, 0680, 0738, 0768, 5050, 5056, 5095}
Hydraulic System Cleanup Recommendations Following Catastrophic Component Failures on Wheel Loader Hydraulic Systems {0645, 0680, 0738, 0768, 5050, 5056, 5095}
Lip Type Seals {0599, 0733, 5050, 7555}
Lip Type Seals {0599, 0733, 5050, 7555}
Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
9U-5000 Series Hydraulic Test Bench {0599, 0738}
9U-5000 Series Hydraulic Test Bench {0599, 0738}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}
4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Procedure for Filtering <NOBR> 9U-5000</NOBR> Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Procedure for Filtering 9U-5000 Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Filtration Procedure for Wheel Loader, Landfill Compactor, Soil Compactor, and Integrated Toolcarrier Hydraulic Oil {0680, 0738, 0768, 5050, 5056}
Filtration Procedure for Wheel Loader, Landfill Compactor, Soil Compactor, and Integrated Toolcarrier Hydraulic Oil {0680, 0738, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Procedure for Operating Caterpillar Filter Carts {0680, 0768, 5050}
Procedure for Operating Caterpillar Filter Carts {0680, 0768, 5050}
Procedure for &quot;Off-Board&quot; Filtering Backhoe Loader and Integrated Toolcarrier Hydraulic Oil Equipped with Auxiliary Lines{0680, 0768, 5050, 5056, 5057}
Procedure for "Off-Board" Filtering Backhoe Loader and Integrated Toolcarrier Hydraulic Oil Equipped with Auxiliary Lines{0680, 0768, 5050, 5056, 5057}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Bench Test Procedures
Required Tooling for Bench Testing Hydraulic Components {0784, 4000, 4005, 4129, 4250, 4300, 5050}
Required Tooling for Bench Testing Hydraulic Components {0784, 4000, 4005, 4129, 4250, 4300, 5050}
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
New Hydraulic Hose Assembly Machine Integrates Crimputer II with Radial Crimping Technology {0738}
2004/05/03
Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
2004/03/29
Hose Kit Helps the Technician Properly Prepare Hydraulic Hose for Assembly {0684}
2004/05/31
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784}
2004/12/27
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/01
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25
Remove Certain 6D-7726 Hose Assemblies from Inventory {0738}
2005/12/12
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13
Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/01/23
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Specifications
Mounting And Valve Group<BR> (9C2303)
IT28 & IT28B INTEGRATED TOOLCARRIER SERVICE MANUAL
Service Magazine
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Specifications
Makeup And Relief Valve For Rod End Of Coupler Cylinder<BR> (4T947)
IT28 & IT28B INTEGRATED TOOLCARRIER SERVICE MANUAL
Makeup And Relief Valve For Head End Of Coupler, Tilt And Attachment Cylinders<BR> (4T7002)
IT28 & IT28B INTEGRATED TOOLCARRIER SERVICE MANUAL
Orifice Check Valve<BR> 3K5586
IT28 & IT28B INTEGRATED TOOLCARRIERS AIR SYSTEM AND BRAKES
Makeup And Relief Valve For Rod End Of Coupler Cylinder<BR> 4T947
IT28 & IT28B INTEGRATED TOOLCARRIERS HYDRAULIC SYSTEM
Makeup And Relief Valve For Head End Of Coupler, Tilt And Attachment Cylinders<BR> 4T7002
IT28 & IT28B INTEGRATED TOOLCARRIERS HYDRAULIC SYSTEM
Disassembly and Assembly
Loader Control Valves (IT28 &amp; IT28B)
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Loader Control Valves (IT18 &amp; IT18B)
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Specifications
Mounting And Valve Group<BR> (9C2303)
IT28 & IT28B INTEGRATED TOOLCARRIER SERVICE MANUAL
Main Control Valve Group<BR> 9T3700
IT28 & IT28B INTEGRATED TOOLCARRIER SERVICE MANUAL
Inlet Valve Group<BR> (9T5318)
IT28 & IT28B INTEGRATED TOOLCARRIER SERVICE MANUAL
Tilt And Attachment Control Valve<BR> (9T1450)
IT28 & IT28B INTEGRATED TOOLCARRIER SERVICE MANUAL
Lift Control Valve<BR> (9T211)
IT28 & IT28B INTEGRATED TOOLCARRIER SERVICE MANUAL
Coupler Control Valve<BR> (9T982)
IT28 & IT28B INTEGRATED TOOLCARRIER SERVICE MANUAL
Main Control Valve Group<BR> (4T5869/9T3700)
IT28 & IT28B INTEGRATED TOOLCARRIERS HYDRAULIC SYSTEM
Inlet Valve Group<BR> (9T1617/9T5318)
IT28 & IT28B INTEGRATED TOOLCARRIERS HYDRAULIC SYSTEM
Coupler Control Valve<BR> 9T982
IT28 & IT28B INTEGRATED TOOLCARRIERS HYDRAULIC SYSTEM
Tilt And Attachment Control Valve<BR> (4T5866/9T1450)
IT28 & IT28B INTEGRATED TOOLCARRIERS HYDRAULIC SYSTEM
Lift Control Valve<BR> 9T211
IT28 & IT28B INTEGRATED TOOLCARRIERS HYDRAULIC SYSTEM
Tool Operating Manual
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Disassembly and Assembly
Loader Control Valves (IT28 &amp; IT28B)
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Loader Control Valves (IT18 &amp; IT18B)
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Service Magazine
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Specifications
Diverter Valve For Supplemental Steering<BR> 4T7568
IT28 & IT28B INTEGRATED TOOLCARRIERS STEERING SYSTEM
Circuit Selector Valve For Attachment Cylinders<BR> 4T5541
IT28 & IT28B INTEGRATED TOOLCARRIERS HYDRAULIC SYSTEM
Disassembly and Assembly
Diverter Valve (Front Implement)
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Supplemental Steering (Diverter) Valve (IT28 &amp; IT28B)
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Service Magazine
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Specifications
Inlet Valve Group<BR> (9T5318)
IT28 & IT28B INTEGRATED TOOLCARRIER SERVICE MANUAL
Inlet Valve Group<BR> (9T1617/9T5318)
IT28 & IT28B INTEGRATED TOOLCARRIERS HYDRAULIC SYSTEM
Charging Valve<BR> 4T1008
IT28 & IT28B INTEGRATED TOOLCARRIERS HYDRAULIC SYSTEM
Disassembly and Assembly
Steering Flow Control &amp; Relief Valve (IT18 &amp; IT18B)
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Service Magazine
Adding Orifice To Inlet Manifold Eliminates Vibration In Pressure-Compensated Hydraulic Systems{5137}
1991/02/25
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Engine News
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Specifications
Main Relief Valve<BR> 4T6959
IT28 & IT28B INTEGRATED TOOLCARRIER SERVICE MANUAL
Makeup And Relief Valve For Rod End Of Coupler Cylinder<BR> (4T947)
IT28 & IT28B INTEGRATED TOOLCARRIER SERVICE MANUAL
Makeup And Relief Valve For Head End Of Coupler, Tilt And Attachment Cylinders<BR> (4T7002)
IT28 & IT28B INTEGRATED TOOLCARRIER SERVICE MANUAL
Relief Valve For Rod End Of Tilt And Attachment Cylinders<BR> (9T5310)
IT28 & IT28B INTEGRATED TOOLCARRIER SERVICE MANUAL
Inlet Valve Group<BR> (9T5318)
IT28 & IT28B INTEGRATED TOOLCARRIER SERVICE MANUAL
Main Relief Valve<BR> (4T1039/9T7184/9T7388)
IT28 & IT28B INTEGRATED TOOLCARRIERS HYDRAULIC SYSTEM
Makeup And Relief Valve For Rod End Of Coupler Cylinder<BR> 4T947
IT28 & IT28B INTEGRATED TOOLCARRIERS HYDRAULIC SYSTEM
Makeup And Relief Valve For Head End Of Coupler, Tilt And Attachment Cylinders<BR> 4T7002
IT28 & IT28B INTEGRATED TOOLCARRIERS HYDRAULIC SYSTEM
Relief Valve For Rod End Of Tilt And Attachment Cylinders
IT28 & IT28B INTEGRATED TOOLCARRIERS HYDRAULIC SYSTEM
Inlet Valve Group<BR> (9T1617/9T5318)
IT28 & IT28B INTEGRATED TOOLCARRIERS HYDRAULIC SYSTEM
Charging Valve<BR> 4T1008
IT28 & IT28B INTEGRATED TOOLCARRIERS HYDRAULIC SYSTEM
Tool Operating Manual
Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117}
Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117}
Reuse And Salvage Guidelines
Specifications For Hydraulic Piston Pump And Motor Components {3083, 3203, 3221, 3222, 4351, 5058, 5069, 5070, 5117}
Specifications For Hydraulic Piston Pump And Motor Components {3083, 3203, 3221, 3222, 4351, 5058, 5069, 5070, 5117}
Disassembly and Assembly
Loader Control Valves (IT28 &amp; IT28B)
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Loader Control Valves (IT18 &amp; IT18B)
IT18, IT18B, IT28, & IT28B INTEGRATED TOOLCARRIERS VEHICLE S
Service Magazine
Adding Orifice To Inlet Manifold Eliminates Vibration In Pressure-Compensated Hydraulic Systems{5137}
1991/02/25
A New Coil Assembly is Now Used {5479}
2011/05/04

Truck sale:

Caterpillar IT28, Construction
32,000 
Caterpillar IT28, Construction
- Wheel Loaders
N C MACHINERY CO.
CATERPILLAR IT28 1986
 
CATERPILLAR IT28 1986
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
FINNING (CANADA)
16830 107 Avenue NW - Edmonton - Alber
CATERPILLAR IT28 1986
 
CATERPILLAR IT28 1986
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
N C MACHINERY
- Billings - United States
CATERPILLAR IT28 1986
 
CATERPILLAR IT28 1986
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
FABICK WI
United States
2001 CAT IT28
USD $29,500 
2001 CAT IT28

FABICK CAT
Milwaukee, Wisconsin