IT28 INTEGRATED TOOLCARRIER 2KC00001-UP (MACHINE) POWERED BY 3204 ENGINE LUBRICATION SYSTEM Caterpillar SIS




INTEGRATED TOOLCARRIER IT28 INTEGRATED TOOLCARRIER 2KC
 IT28 INTEGRATED TOOLCARRIER 2KC00001-UP (MACHINE) POWERED BY 3204 ENGINE SEBP1514 IT28 2KC   (1985)

Parts group IT28:

  For full view, you need register
LUBRICATION SYSTEM
BREATHER GP
BREATHER GP
1W-7298 BREATHER GP
1W7298 BREATHER GROUP
FILTER GP-ENGINE OIL
FILTER GP-ENGINE OIL
8N-5930 FILTER GP-ENGINE OIL
8N5930 OIL FILTER GROUP
FILLER GP-OIL
7N-6496 FILLER GP-OIL
7N6496 OIL FILLER GROUP
FUMES DISPOSAL GP
FUMES DISPOSAL GP
7N-6497 FUMES DISPOSAL GP
7N6497 FUMES DISPOSAL GROUP
SERIAL NO. 2KC1 TO 2KC00945 INCLUSIVE
FUMES DISPOSAL GP
7N-6497 FUMES DISPOSAL GP
7N6497 DISPOSAL GP-FUME
SERIAL NO. 2KC00946-UP
GAUGE GP-OIL LEVEL (DIPSTICK)
GAUGE GP-OIL LEVEL (DIPSTICK)
7N-6498 GAUGE GP-OIL LEVEL (DIPSTICK)
7N6498 OIL LEVEL GAUGE GROUP
LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
1W-8869 LINES GP-TURBOCHARGER OIL
1W8869 TURBOCHARGER OIL LINES GROUP
PUMP GP-ENGINE OIL
PUMP GP-ENGINE OIL
2W-2833 PUMP GP-ENGINE OIL
2W2833 PUMP GP-ENGINE OIL
S/N 45V39562-53738
PUMP GP-ENGINE OIL
2W-2833 PUMP GP-ENGINE OIL
2W2833 PUMP GP-ENGINE OIL
S/N 45V53739-UP

Information:

(For parts list, see above)

Specifications
Air Breather
3204 VEHICULAR ENGINE
Tool Operating Manual
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Service Magazine
Tune-Up Kit And Remanufactured Nozzles Available{1254,1074,1107}
1984/09/03
Fumes Disposal Group Improved{1317}
1985/09/02
Special Instruction
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Special Instruction
Instructions For 3208 Engine Oil Filter Base Installation{1306}
Instructions For 3208 Engine Oil Filter Base Installation{1306}
Installation Of 7W1762, 9N5233 And 9N3586 Oil Cooler Core Assemblies{1378}
Installation Of 7W1762, 9N5233 And 9N3586 Oil Cooler Core Assemblies{1378}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Specifications
Oil Filter
3204 VEHICULAR ENGINE
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Disassembly and Assembly
Oil Filter And Base
SUPPLEMENT FOR IT18 & IT28 INTEGRATED TOOLCARRIER - 3204 VEH
Service Magazine
Two New Oil Filter Assemblies Available; Always Use Correct Oil Filter And Follow Caterpillar Change Intervals{1318}
1981/02/23
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27
Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10
Oil Cooler Gasket Has Improved Material {1300,1378}
1986/07/28
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
Color Coded Dust Caps for S·O·S Ports Will Be Available {7770}
2003/12/01
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Service Magazine
Fumes Disposal Group Improved{1317}
1985/09/02
Special Instruction
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Special Instruction
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Disassembly and Assembly
Piston Cooling Orifices
3204 VEHICULAR ENGINES
Service Magazine
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
Two New Oil Filter Assemblies Available; Always Use Correct Oil Filter And Follow Caterpillar Change Intervals{1318}
1981/02/23
New Clearance Specifications For Oil Pump Rotor Tip{1304,0374}
1981/11/09
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27
Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17
Fumes Disposal Group Improved{1317}
1985/09/02
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Oil Total Base Number (TBN) Test Kit Available{1300}
1986/01/20
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10
Special Tools For Complete Repair Of Water Pump In Direct Injection Engines{0620,1361}
1977/05/02
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Special Instruction
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Specifications
Oil Pump
3204 VEHICULAR ENGINE
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Disassembly and Assembly
Oil Pump And Relief Valve
3204 VEHICULAR ENGINES
Service Magazine
New Clearance Specifications For Oil Pump Rotor Tip{1304,0374}
1981/11/09
New Oil Pump Relief Valve Guide{1304}
1986/10/20
Special Tools For Complete Repair Of Water Pump In Direct Injection Engines{0620,1361}
1977/05/02
Check Engine Water Pump Impeller Face Clearance If The Engine Experiences Symptoms Of Overheating {1361}
1993/01/25
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/01
Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/01
Service Magazine
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/01
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Engine News
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Truck sale:

Caterpillar IT28, Construction
32,000 
Caterpillar IT28, Construction
- Wheel Loaders
N C MACHINERY CO.
CATERPILLAR IT28 1986
 
CATERPILLAR IT28 1986
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
FINNING (CANADA)
16830 107 Avenue NW - Edmonton - Alber
CATERPILLAR IT28 1986
 
CATERPILLAR IT28 1986
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
N C MACHINERY
- Billings - United States
CATERPILLAR IT28 1986
 
CATERPILLAR IT28 1986
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
FABICK WI
United States
2001 CAT IT28
USD $29,500 
2001 CAT IT28

FABICK CAT
Milwaukee, Wisconsin