2W4841 PISTON GROUP PART OF 2W1040 CONNECTING ROD AND PISTON IT28 INTEGRATED TOOLCARRIER

2W-4841: PISTON GP

2W4841 PISTON GROUP
PART OF 2W1040 CONNECTING ROD AND PISTON

Parts for your IT28 INTEGRATED TOOLCARRIER:

Pos.	Part No	Qty	Parts name
1.	9L-6233	[1]	RING-PISTON-TOP (COMPRESSION)
2.	7E-7297	[1]	RING AS-PISTON (OIL)
3.	2W-4831 C	[1]	BODY AS-PISTON
4.	2W-8411 A	[1]	BODY AS-PISTON
	2W-8647 A	[1]	RING GP-PISTON 1.02MM(.04IN.)OVERSIZE
	9N-0578	[1]	RING-PISTON-TOP (COMPRESSION)
	2W-8417	[1]	RING-PISTON (OIL)
5.	2W-8410 A	[1]	BODY AS-PISTON
	2W-8646 A	[1]	RING GP-PISTON .51MM(.02IN.)OVERSIZE
	9N-0581	[1]	RING-PISTON-TOP (COMPRESSION)
	2W-8416	[1]	RING-PISTON (OIL)
	2W-8265 CA	[1]	RING GP-PISTON (CONSISTS OF A COMPLETE
			SET OF RINGS FOR ONE
			STANDARD PISTON)
	A		NOT PART OF THIS GROUP
	C		CHANGE FROM PREVIOUS TYPE

2W-1040: PISTON & ROD GP

PISTON & ROD GP

2W1040 CONNECTING ROD & PISTON GROUP-4 REQUIRED
2W4841-PAGE 11

Parts for your IT28 INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2W-4841 Y	[1]	PISTON GP
2.	8N-6308	[1]	BEARING-CONNECTING ROD (STANDARD)
	1W-3906 A	[1]	BEARING-CONNECTING ROD
			1.27MM(.05 IN)UNDERSIZE
	1N-3821 A	[1]	BEARING-ROD
			.254MM(.01 IN)UNDERSIZE
	1N-3822 A	[1]	BEARING-ROD
			.51MM(.021 IN)UNDERSIZE
3.	8N-3753	[1]	ROD AS-CONNECTING
	9N-5082	[1]	BEARING-CONNECTING ROD
4.	9N-3832	[2]	BOLT-CONNECTING ROD
	9L-7669	[2]	NUT-CONNECTING ROD
5.	7N-9803	[1]	PIN-PISTON
6.	8N-7294	[2]	RETAINER-PIN
	A		NOT PART OF THIS GROUP
	Y		SEPARATE ILLUSTRATION

6N-2397: CYLINDER HEAD GP

CYLINDER HEAD GP

6N2397 CYLINDER HEAD GROUP*R
ENGINE S/N 45V39562-54699
2W0011-PAGE 13

Parts for your IT28 INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2W-0011 CYR	[1]	CYLINDER HEAD GP
2.	9L-7657	[1]	PLUG-CUP
3.	1D-4572	[4]	BOLT (LOCATION A)
4.	6N-8505	[1]	GASKET-CYLINDER HEAD
5.	0S-1571	[1]	BOLT
6.	5B-9603	[2]	BOLT (LOCATION D)
7.	0L-1329	[4]	BOLT (LOCATION E)
8.	2H-6488	[6]	BOLT (LOCATION F)
9.	2B-0947	[4]	BOLT (LOCATION G)
10.	5M-6213	[3]	PLUG
11.	3H-7654	[18]	WASHER
12.	1A-5964	[1]	BOLT
	C		CHANGE FROM PREVIOUS TYPE
	R		REMFG PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

6N-2397: CYLINDER HEAD GP

CYLINDER HEAD GP

6N2397 CYLINDER HEAD GP*R
ENGINE S/N 45V54700-UP
7W9394-PAGE 13.01

Parts for your IT28 INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7W-9394 CRY	[1]	CYLINDER HEAD GP
2.	9L-7657	[1]	PLUG-CUP
3.	1D-4572	[4]	BOLT (LOCATION A)
4.	7W-2059 C	[1]	GASKET-CYLINDER HEAD
5.	0S-1571	[1]	BOLT
6.	5B-9603	[2]	BOLT (LOCATION D)
7.	0L-1329	[4]	BOLT (LOCATION E)
8.	2H-6488	[6]	BOLT (LOCATION F)
9.	2B-0947	[4]	BOLT (LOCATION G)
10.	5M-6213 C	[2]	PLUG
11.	3H-7654	[18]	WASHER
12.	1A-5964	[1]	BOLT
	C		CHANGE FROM PREVIOUS TYPE
	R		REMFG PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

2W-0011: CYLINDER HEAD GP

CYLINDER HEAD GP

2W0011 CYLINDER HEAD GROUP*R
ENGINE S/N 45V39562-54699
PART OF 6N2397 CYLINDER HEAD

Parts for your IT28 INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2A-4429	[16]	LOCK-RETAINER
2.	1W-4260	[8]	RETAINER-SPRING
3.	1W-4259	[8]	SPRING-VALVE
4.	1W-9897	[8]	WASHER-SPRING SEAT
5.	9N-5125	[4]	VALVE-EXHAUST
	9L-7682	[4]	VALVE-INLET
6.	4W-4031 R	[1]	CYLINDER HEAD AS-SERVICE
7.	9N-2837	[4]	INSERT-SEAT EXHAUST
	2N-8943	[4]	INSERT-INTAKE
8.	8M-5860	[4]	PLUG-CUP
9.	9L-7657	[1]	PLUG-CUP
10.	2B-0858	[1]	PLUG-PIPE
11.	6H-1717	[2]	BOLT
	5P-8245	[1]	WASHER
12.	5M-6213	[1]	PLUG
	R		REMFG PART MAY BE AVAILABLE

7W-9394: CYLINDER HEAD GP

CYLINDER HEAD GP

7W9394 CYLINDER HEAD GP*R
ENGINE S/N 45V54700-UP
7W9391-PAGE 13.02
PART OF 6N2397 CYLINDER HEAD

Parts for your IT28 INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2A-4429	[16]	LOCK-RETAINER
2.	1W-4260	[8]	RETAINER-SPRING
3.	1W-4259	[8]	SPRING-VALVE
4.	1W-9897	[8]	WASHER-SPRING SEAT
5.	9N-5125	[4]	VALVE-EXHAUST
	9L-7682	[4]	VALVE-INLET
6.	7W-9391 Y	[1]	CYLINDER HEAD AS
	Y		SEPARATE ILLUSTRATION

7W-9391: CYLINDER HEAD AS

CYLINDER HEAD AS

7W9391 CYLINDER HEAD ASSEMBLY
ENGINE S/N 45V54700-UP
PART OF 7W9394 CYLINDER HEAD
FOR FIELD REPLACEMENT ORDER 7C2320-PAGE 13.03

Parts for your IT28 INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8M-5860	[4]	PLUG-CUP
2.	9N-2837	[4]	INSERT-SEAT EXHAUST
	2N-8943	[4]	INSERT-INTAKE

7C-2320: CYLINDER HEAD AS

CYLINDER HEAD AS

7C2320 HEAD AS-CYLINDER SERVICE*R
PROVIDES FIELD REPLACEMENT FOR 7W9391-PAGE 13.02

Parts for your IT28 INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2B-0858	[1]	PLUG-PIPE
2.	9L-7657	[1]	PLUG-CUP
3.	5M-6213	[2]	PLUG
4.	6H-1717	[2]	BOLT
5.	5P-8245	[2]	WASHER
6.	8M-5860	[4]	PLUG-CUP
7.	8F-6575	[4]	PLUG-CUP
8.	9N-2837	[4]	INSERT-SEAT EXHAUST
9.	2N-8943	[4]	INSERT-INTAKE

1W-5720: VALVE MECHANISM GP

VALVE MECHANISM GP

1W5720 VALVE MECHANISM GROUP

Parts for your IT28 INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1D-4540	[4]	BOLT
	9M-1974	[4]	WASHER
2.	9L-8623	[8]	ROD-VALVE PUSH
3.	9N-5786	[8]	LIFTER-VALVE
4.	1W-5718 C	[1]	BRACKET-SHAFT
5.	9L-9315 C	[1]	SHAFT AS-ARM
6.	2W-8271 C	[8]	ROCKER ARM AS
7.	5S-5917 C	[8]	SCREW-ROCKER ADJUSTING
	3S-2713 C	[8]	NUT-FULL
8.	2B-2694 C	[2]	BOLT
	9M-1974 C	[2]	WASHER
9.	9L-8076 C	[2]	WASHER-ARM SHAFT
10.	2W-6047 C	[8]	WASHER
	C		CHANGE FROM PREVIOUS TYPE

2W-1678: LIFTING GP

LIFTING GP

2W1678 ENGINE LIFTING GROUP

Parts for your IT28 INTEGRATED TOOLCARRIER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2W-1679	[1]	PLATE-EYE (FRONT)
2.	4N-0228	[1]	PLATE-EYE (REAR)
3.	0S-1594	[4]	BOLT
4.	5M-2894	[4]	WASHER
5.	0T-0320	[3]	BOLT
6.	4S-9191	[3]	WASHER

Information:

BASIC ENGINE

PISTON & ROD GP

Special Instruction

Use of Piston Pin Bearing Removal and Installation Tools{1218}
Use of Piston Pin Bearing Removal and Installation Tools{1218}

Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}

Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}

Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Service Letter-NACD

Product Support Program For Reworking The Piston Pin Bearing On Certain 508 And FB508 Skidders, 910, 910E, G910, 916, 926, 926E, G926, 931, 931B, 931C, 931C Series II, 935B, 935C, 943, And 953 Loaders, D3, D3B, D3C, D3C Series II, D4B, D4C, D4C Series II, D4H, And D4H Series II Tractors, E180 And El180 Excavators, And IT12, IT18B, IT28, And IT28B Integrated Toolcarriers.
Product Support Program For Reworking The Piston Pin Bearing On Certain 508 And FB508 Skidders, 910, 910E, G910, 916, 926, 926E, G926, 931, 931B, 931C, 931C Series II, 935B, 935C, 943, And 953 Loaders, D3, D3B, D3C, D3C Series II, D4B, D4C, D4C Series II, D4H, And D4H Series II Tractors, E180 And El180 Excavators, And IT12, IT18B, IT28, And IT28B Integrated Toolcarriers.

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Service Letter-Brazil

Technical Information Bulletin

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Specifications

Pistons And Rings
3204 VEHICULAR ENGINE

Connecting Rod
3204 VEHICULAR ENGINE

Connecting Rod Bearings
3204 VEHICULAR ENGINE

Tool Operating Manual

Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}

NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}

Service Letter-China

Product Support Program For Reworking The Piston Pin Bearing On Certain 508 And FB508 Skidders, 910, 910E, G910, 916, 926, 926E, G926, 931, 931B, 931C, 931C Series II, 935B, 935C, 943, And 953 Loaders, D3, D3B, D3C, D3C Series II, D4B, D4C, D4C Series II, D4H, And D4H Series II Tractors, E180 And El180 Excavators, And IT12, IT18B, IT28, And IT28B Integrated Toolcarriers.
Product Support Program For Reworking The Piston Pin Bearing On Certain 508 And FB508 Skidders, 910, 910E, G910, 916, 926, 926E, G926, 931, 931B, 931C, 931C Series II, 935B, 935C, 943, And 953 Loaders, D3, D3B, D3C, D3C Series II, D4B, D4C, D4C Series II, D4H, And D4H Series II Tractors, E180 And El180 Excavators, And IT12, IT18B, IT28, And IT28B Integrated Toolcarriers.

Service Letter-Asia

Reuse And Salvage Guidelines

Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}

Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}

Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}

Service Letter-APD

Product Support Program For Reworking The Piston Pin Bearing On Certain 508 And FB508 Skidders, 910, 910E, G910, 916, 926, 926E, G926, 931, 931B, 931C, 931C Series II, 935B, 935C, 943, And 953 Loaders, D3, D3B, D3C, D3C Series II, D4B, D4C, D4C Series II, D4H, And D4H Series II Tractors, E180 And El180 Excavators, And IT12, IT18B, IT28, And IT28B Integrated Toolcarriers.
Product Support Program For Reworking The Piston Pin Bearing On Certain 508 And FB508 Skidders, 910, 910E, G910, 916, 926, 926E, G926, 931, 931B, 931C, 931C Series II, 935B, 935C, 943, And 953 Loaders, D3, D3B, D3C, D3C Series II, D4B, D4C, D4C Series II, D4H, And D4H Series II Tractors, E180 And El180 Excavators, And IT12, IT18B, IT28, And IT28B Integrated Toolcarriers.

Disassembly and Assembly

Connecting Rod Bearings
3204 VEHICULAR ENGINES

Pistons And Connecting Rods
3204 VEHICULAR ENGINES

Service Magazine

Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18

Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03

Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03

New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09

Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08

Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22

New Piston Design Decreases Oil Consumption{1214,1215}
1982/12/20

New Connecting Rod For Service Replacement{1218,1225}
1983/01/31

New Reconditioning Specifications For Cylinders Decrease Piston Scuffing And Seizure {0374,1223,1216,1201}
1983/04/18

Reuse Of Engine Bearings{1230}
1983/05/16

Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21

New Main And Connecting Rod Bearings Have Copper Bond Material{1203,1219,1230}
1984/10/01

Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29

Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07

Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02

Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16

Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08

Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20

Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26

Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01

Testing Connecting Rod Eye Bushings When Overhauling Engines{1218}
1987/07/06

Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17

Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24

Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21

5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14

Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27

Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17

Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/10/31

Piston Ring Groove Gauges To Quickly And Accurately Determine Reusability Of Pistons{1214,0763}
1997/01/13

New Guidelines for Inspecting Pistons {1214}
2006/01/02

New Three Ring Pistons are Now Used In Turbocharged 3204 <B>S/N:</B>45V<BR> Engines {1214, 1215}
2008/02/11

Caterpillar Parts SIS Catalog IT28 :

Truck sale:

32,000

Caterpillar IT28, Construction
- Wheel Loaders
N C MACHINERY CO.

CATERPILLAR IT28 1986
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
FINNING (CANADA)
16830 107 Avenue NW - Edmonton - Alber

CATERPILLAR IT28 1986
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
N C MACHINERY
- Billings - United States

CATERPILLAR IT28 1986
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
FABICK WI
United States

USD $29,500

2001 CAT IT28

FABICK CAT
Milwaukee, Wisconsin