AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3408B Industrial Engine 67U11092-UP LUBRICATION SYSTEM Caterpillar SIS



INDUSTRIAL ENGINE 3408B INDUSTRIAL ENGINE 67U
 3408B Industrial Engine 67U11092-UP SEBP1518 3408B 67U   (1976)

Parts group 3408B:

  For full view, you need register
LUBRICATION SYSTEM
BAFFLE GP-OIL
BAFFLE GP-OIL
1W-4872 BAFFLE GP-OIL
1W-4872 BAFFLE GP-OIL
FOR USE WITH SAE NO. 1 ALUMINUM FLYWHEEL HOUSING
AN ATTACHMENT
BREATHER GP
BREATHER GP
2N-8220 BREATHER GP
2N-8220 BREATHER GP -CRANKCASE
S/N 67U11092-13356
FOR USE WITH FUMES DISPOSAL GROUPS
BREATHER GP
2N-8220 BREATHER GP
2N-8220 BREATHER GP -CRANKCASE
S/N 67U13357-UP
FOR USE WITH FUMES DISPOSAL GROUPS
BREATHER GP
9Y-2989 BREATHER GP
9Y-2989 BREATHER GP
S/N 67U13357-UP
FOR USE WITH OPEN FUMES DISPOSAL
FUMES DISPOSAL GP
109-2852 FUMES DISPOSAL GP
109-2852 FUMES DISPOSAL GP
FOR USE WITH @@@@@ 7N-9950@@@@@, LH START MOTORS, RADIATOR GP
CANNOT BE USED WITH ENCLOSURES OR LH DUPLEX OIL FILTERS
AN ATTACHMENT
FUMES DISPOSAL GP
4W-4703 FUMES DISPOSAL GP
4W-4703 FUMES DISPOSAL GP
FOR USE WITH DRY MANIFOLD HEAT SHIELD
AN ATTACHMENT
FUMES DISPOSAL GP
4W-9589 FUMES DISPOSAL GP
4W-9589 FUMES DISPOSAL GP
FOR USE WITH ELECTRIC JUNCTION BOX MOUNTING
AN ATTACHMENT
FUMES DISPOSAL GP
5N-7426 FUMES DISPOSAL GP
5N-7426 FUMES DISPOSAL GP
FOR USE WITH @@@@@ 7N-9948@@@@@, @@@@@ 7N-9949@@@@@, @@@@@ 8N-4877@@@@@, @@@@@ 8N-5894@@@@@, @@@@@ 8N-4873@@@@@, @@@@@ 7N-9950@@@@@, @@@@@ 7N-9951@@@@@, @@@@@ 8N-4879@@@@@, @@@@@ 8N-5895@@@@@
CANNOT BE USED WITH JACKET WATER HEATER
AN ATTACHMENT
FUMES DISPOSAL GP
6N-3946 FUMES DISPOSAL GP
6N-3946 FUMES DISPOSAL GP
FOR USE WITH WATER COOLED EXHAUST MANIFOLD
AN ATTACHMENT
FUMES DISPOSAL GP
6N-5597 FUMES DISPOSAL GP
6N-5597 FUMES DISPOSAL GP
FOR USE WITH DRY OR WATER COOLED MANIFOLDS
AN ATTACHMENT
FUMES DISPOSAL GP
6N-5597 FUMES DISPOSAL GP
6N-5597 FUMES DISPOSAL GP
FOR USE WITH DRY OR WATER COOLED MANIFOLDS
ALSO AN ATTACHMENT
FUMES DISPOSAL GP
7C-7963 FUMES DISPOSAL GP
7C-7963 FUMES DISPOSAL GP
FOR USE WITH 46-9 CORE RADIATOR WITH BLOWER FAN
AN ATTACHMENT
FUMES DISPOSAL GP
7C-8086 FUMES DISPOSAL GP
7C-8086 FUMES DISPOSAL GP
FOR USE WITH 50-11 OR 46-10 FOLDED CORE RADIATOR, (ENGINE MOUNTED) WITH BLOWER FAN
AN ATTACHMENT
FUMES DISPOSAL GP
7N-7033 FUMES DISPOSAL GP
7N-7033 FUMES DISPOSAL GP
PROVIDES 2 BREATHER TUBES ON RIGHT SIDE ON ENG WITH BOTH OUTLETS AT FRONT OF ENG
AN ATTACHMENT
FUMES DISPOSAL GP
7W-9113 FUMES DISPOSAL GP
7W-9113 FUMES DISPOSAL GP
CANNOT BE USED WITH ENCLOSURES
AN ATTACHMENT
FUMES DISPOSAL GP
7W-9114 FUMES DISPOSAL GP
7W-9114 FUMES DISPOSAL GP
CANNOT BE USED WITH ENCLOSURES
AN ATTACHMENT
FUMES DISPOSAL GP
9N-1897 FUMES DISPOSAL GP
9N-1897 FUMES DISPOSAL GP
S/N 67U18994-UP
FUMES DISPOSAL GP
9Y-3635 FUMES DISPOSAL GP
9Y-3635 FUMES DISPOSAL GP
FOR USE WITH LAMINATED THERMO SHIELDS
AN ATTACHMENT
FILLER GP-ENGINE OIL
FILLER GP-ENGINE OIL
127-9373 FILLER GP-ENGINE OIL
127-9373 FILLER GP-ENGINE OIL
S/N 67U18770-UP
FILLER GP-ENGINE OIL
2W-6537 FILLER GP-ENGINE OIL
2W-6537 FILLER GP-ENGINE OIL
FILTER GP-ENGINE OIL
BASE GP-OIL FILTER
282-1788 BASE GP-OIL FILTER
282-1788 BASE GP-OIL FILTER
PART OF 6N-0936 FILTER GP-ENGINE OIL
2W-8567 FILTER AR-ENGINE OIL
2W-8567 FILTER AR-ENGINE OIL -LH
MOUNTED
FOR USE WITH @@@@@ 6N-6499@@@@@
FOR USAGE REFER TO CHART @@@@@ 2W-8691@@@@@
AN ATTACHMENT
8N-3032 FILTER AR-ENGINE OIL
8N-3032 FILTER AR-ENGINE OIL -LH
MOUNTING
CANNOT BE USED WITH GENERATOR SET ENGINES OF FRONT SUMP ENGINE ARS
AN ATTACHMENT
FILTER GP-ENGINE OIL
4N-1409 FILTER GP-ENGINE OIL
4N-1409 FILTER GP-ENGINE OIL
PART OF 2W-8567, 8N-3032 FILTER AR-ENGINE OIL
AN ATTACHMENT
FILTER GP-ENGINE OIL
4N-1409 FILTER GP-ENGINE OIL
4N-1409 FILTER GP-ENGINE OIL
S/N 67U18994-UP
PART OF 2W-8567, 8N-3032 FILTER AR-ENGINE OIL
ALSO AN ATTACHMENT
FILTER GP-ENGINE OIL
6N-0936 FILTER GP-ENGINE OIL
6N-0936 FILTER GP-ENGINE OIL
Type 1
FILTER GP-ENGINE OIL
6N-0936 FILTER GP-ENGINE OIL
6N-0936 FILTER GP-ENGINE OIL
Type 2
FILTER GP-ENGINE OIL
8N-7268 FILTER GP-ENGINE OIL
8N-7268 FILTER GP-ENGINE OIL -LH
DUPLEX
FOR USE WITH WATERCOOLED EXHAUST MANIFOLD
CANNOT BE USED WITH LH STARTER
AN ATTACHMENT
GAUGE GP-OIL LEVEL (DIPSTICK)
GAUGE GP-OIL LEVEL (DIPSTICK)
144-4053 GAUGE GP-OIL LEVEL (DIPSTICK)
144-4053 GAUGE GP-OIL LEVEL (DIPSTICK) -LH REAR
AN ATTACHMENT
GAUGE GP-OIL LEVEL (DIPSTICK)
188-0297 GAUGE GP-OIL LEVEL (DIPSTICK)
188-0297 GAUGE GP-OIL LEVEL (DIPSTICK) -LH REAR
FOR USE WITH HYDRAULIC PUMP DRIVE
AN ATTACHMENT
GAUGE GP-OIL LEVEL (DIPSTICK)
4W-1548 GAUGE GP-OIL LEVEL (DIPSTICK)
4W-1548 GAUGE GP-OIL LEVEL (DIPSTICK) -ENGINE
PART OF 4W-1783 PAN GP-OIL
AN ATTACHMENT
GAUGE GP-OIL LEVEL (DIPSTICK)
5N-4714 GAUGE GP-OIL LEVEL (DIPSTICK)
5N-4714 GAUGE GP-OIL LEVEL (DIPSTICK)
RH REAR
AN ATTACHMENT
GAUGE GP-OIL LEVEL (DIPSTICK)
5N-8322 GAUGE GP-OIL LEVEL (DIPSTICK)
5N-8322 GAUGE GP-OIL LEVEL (DIPSTICK) -ENGINE
S/N 67U11135-11614
LH REAR
GAUGE GP-OIL LEVEL (DIPSTICK)
5N-8322 GAUGE GP-OIL LEVEL (DIPSTICK)
5N-8322 GAUGE GP-OIL LEVEL (DIPSTICK) -ENGINE
S/N 67U11615-UP
LH REAR
ALSO AN ATTACHMENT
GAUGE GP-OIL LEVEL (DIPSTICK)
6N-6959 GAUGE GP-OIL LEVEL (DIPSTICK)
6N-6959 GAUGE GP-OIL LEVEL (DIPSTICK) -ENGINE
RH REAR
GAUGE GP-OIL LEVEL (DIPSTICK)
8N-3920 GAUGE GP-OIL LEVEL (DIPSTICK)
8N-3920 GAUGE GP-OIL LEVEL (DIPSTICK) -LH, REAR
FOR USE WITH LH DUPLEX OIL FILTER
CANNOT BE USED WITH @@@@@ 7N-2642@@@@@, @@@@@ 7N-2645@@@@@, LH PREMIUM INSTRUMENT PANEL, HIGH CAPACITY OIL PAN
AN ATTACHMENT
GAUGE GP-OIL LEVEL (DIPSTICK)
9N-1138 GAUGE GP-OIL LEVEL (DIPSTICK)
9N-1138 GAUGE GP-OIL LEVEL (DIPSTICK)
S/N 67U18994-UP
LINES GP-ENGINE OIL
BLOCK GP-OIL JUNCTION
5N-3699 BLOCK GP-OIL JUNCTION
5N-3699 BLOCK GP-OIL JUNCTION -ENGINE
AN ATTACHMENT
2W-8567 FILTER AR-ENGINE OIL
2W-8567 FILTER AR-ENGINE OIL -LH
MOUNTED
FOR USE WITH @@@@@ 6N-6499@@@@@
FOR USAGE REFER TO CHART @@@@@ 2W-8691@@@@@
AN ATTACHMENT
8N-3032 FILTER AR-ENGINE OIL
8N-3032 FILTER AR-ENGINE OIL -LH
MOUNTING
CANNOT BE USED WITH GENERATOR SET ENGINES OF FRONT SUMP ENGINE ARS
AN ATTACHMENT
LINES GP-ENGINE OIL
2W-8566 LINES GP-ENGINE OIL
2W-8566 LINES GP-ENGINE OIL -LH
MOUNTED FILTER
PART OF 2W-8567 FILTER AR-ENGINE OIL
AN ATTACHMENT
LINES GP-ENGINE OIL
4N-1896 LINES GP-ENGINE OIL
4N-1896 LINES GP-ENGINE OIL
S/N 67U18994-UP
LINES GP-ENGINE OIL
4N-7739 LINES GP-ENGINE OIL
4N-7739 LINES GP-ENGINE OIL
S/N 67U11135-UP
ALSO AN ATTACHMENT
LINES GP-ENGINE OIL
4W-1545 LINES GP-ENGINE OIL
4W-1545 LINES GP-ENGINE OIL
PART OF 4W-1783 PAN GP-OIL
AN ATTACHMENT
LINES GP-ENGINE OIL
5N-4715 LINES GP-ENGINE OIL
5N-4715 LINES GP-ENGINE OIL
REMOTE MOUNTED OIL FILTER
AN ATTACHMENT
LINES GP-ENGINE OIL
7N-3055 LINES GP-ENGINE OIL
7N-3055 LINES GP-ENGINE OIL
PROVIDES OIL SUPPLY TO LUBRICATE BEARING IN THE AUXILIARY HYD. DRIVE WHEN MOUNTED ON #1 FLYWHEEL HSG LEFT SIDE
FOR USAGE REFER TO CHART @@@@@ 7N-9032@@@@@
AN ATTACHMENT
LINES GP-ENGINE OIL
8N-3033 LINES GP-ENGINE OIL
8N-3033 LINES GP-ENGINE OIL
PART OF 8N-3032 FILTER AR-ENGINE OIL
AN ATTACHMENT
LINES GP-ENGINE OIL
8N-3034 LINES GP-ENGINE OIL
8N-3034 LINES GP-ENGINE OIL
LH FILTER
ALSO AN ATTACHMENT
LINES GP-ENGINE OIL DRAIN
5N-3873 LINES GP-ENGINE OIL DRAIN
5N-3873 LINES GP-ENGINE OIL DRAIN
Type 1
FOR USE WITH PC-TA ENGINES
AN ATTACHMENT
LINES GP-ENGINE OIL DRAIN
5N-3873 LINES GP-ENGINE OIL DRAIN
5N-3873 LINES GP-ENGINE OIL DRAIN
Type 2
FOR USE WITH PC-TA ENGINES
AN ATTACHMENT
LINES GP-OIL SUPPLY
131-8292 LINES GP-OIL SUPPLY
131-8292 LINES GP-OIL SUPPLY
FOR USE WITH SAE #1 FLYWHEEL HOUSING WITH RH AUXILIARY DRIVE
AN ATTACHMENT
LINES GP-OIL SUPPLY
147-2963 LINES GP-OIL SUPPLY
147-2963 LINES GP-OIL SUPPLY -ENGINE
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING & SAE-B HYDRAULIC PUMP DRIVE
AN ATTACHMENT
LINES GP-OIL SUPPLY
7N-3056 LINES GP-OIL SUPPLY
7N-3056 LINES GP-OIL SUPPLY -AUXILIARY HYDRAULIC DRIVE
PROVIDES OIL SUPPLY TO LUBRICATE BEARING IN AUXILIARY HYDRAULIC DRIVE WHEN MOUNTED ON RH SIDE OF NO. 0 FLYWHEEL HOUSING
FOR USAGE REFER TO CHART @@@@@ 7N-9032@@@@@
AN ATTACHMENT
LINES GP-OIL SUPPLY
7N-3057 LINES GP-OIL SUPPLY
7N-3057 LINES GP-OIL SUPPLY -ENGINE
FOR USE WITH KEEL COOLED ENGINE, CUSTOMER SUPPLIED "A" SIZE PUMP WITH SAE NO. 2 BOLT MOUNTING FLANGE
FOR USAGE REFER TO CHART @@@@@ 7N-9032@@@@@
AN ATTACHMENT
LINES GP-OIL SUPPLY
7N-3058 LINES GP-OIL SUPPLY
7N-3058 LINES GP-OIL SUPPLY -AUXILIARY HYDRAULIC DRIVE
PROVIDES ENGINE OIL SUPPLY TO LUBRICATE THE BEARING IN THE AUXILIARY HYDRAULIC DRIVE, FOR USE WHEN A OR B AUXILIARY HYDRAULIC DRIVE IS MOUNTED ON THE SAE #0 FLYWHEEL HOUSING LH SIDE
CANNOT BE USED WITH WATER COOLED EXHAUST MANIFOLD
FOR USAGE REFER TO CHART @@@@@ 7N-9032@@@@@
AN ATTACHMENT
LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
4N-3705 LINES GP-TURBOCHARGER OIL
4N-3705 LINES GP-TURBOCHARGER OIL
PART OF 8N-3078 TURBOCHARGER AR
FOR USE WITH @@@@@ 8N-7192@@@@@, @@@@@ 2W-0337@@@@@, @@@@@ 1N-3277@@@@@
AN ATTACHMENT
LINES GP-TURBOCHARGER OIL
4W-3757 LINES GP-TURBOCHARGER OIL
4W-3757 LINES GP-TURBOCHARGER OIL
S/N 67U11401-UP
LINES GP-TURBOCHARGER OIL
6N-4572 LINES GP-TURBOCHARGER OIL
6N-4572 LINES GP-TURBOCHARGER OIL
S/N 67U11135-UP
FOR USE WITH @@@@@ 1W-2237@@@@@
LINES GP-TURBOCHARGER OIL
8N-2405 LINES GP-TURBOCHARGER OIL
8N-2405 LINES GP-TURBOCHARGER OIL
S/N 67U11803-12176
LINES GP-TURBOCHARGER OIL
8N-2405 LINES GP-TURBOCHARGER OIL
8N-2405 LINES GP-TURBOCHARGER OIL
S/N 67U12177-UP
LINES GP-TURBOCHARGER OIL
8N-8379 LINES GP-TURBOCHARGER OIL
8N-8379 LINES GP-TURBOCHARGER OIL
S/N 67U11135-UP
LINES GP-TURBOCHARGER OIL
9N-0447 LINES GP-TURBOCHARGER OIL
9N-0447 LINES GP-TURBOCHARGER OIL
S/N 67U11135-11400
PUMP GP-ENGINE OIL
FASTENER GP-OIL PUMP MOUNTING
4N-2481 FASTENER GP-OIL PUMP MOUNTING
4N-2481 FASTENER GP-OIL PUMP MOUNTING -ENGINE
PUMP GP-ENGINE OIL
161-4113 PUMP GP-ENGINE OIL
161-4113 PUMP GP-ENGINE OIL
S/N 67U17973-UP
PUMP GP-ENGINE OIL
4N-8734 PUMP GP-ENGINE OIL
4N-8734 PUMP GP-ENGINE OIL
S/N 67U11092-17972; 67U18994-UP

Information:

(For parts list, see above)

Technical Information Bulletin
Excessive Blow-By And Oil Consumption Complaints
Excessive Blow-By And Oil Consumption Complaints
Specifications
Oil Breather Cap
3408C & 3412C INDUSTRIAL ENGINES
Crankcase Breather
3408B and 3408C Industrial and Marine Engines
Tool Operating Manual
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Engine News
Mechanical Shutoff Groups Changed To Prevent Vibration Of Oil Line Tubes
1982/11/10
New Rack Shutoff Solenoid Available
1983/03/16
New Fuel Shutoff Solenoid Assembly Used
1988/11/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Service Letter-NACD
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Oil Breather Cap
3408C & 3412C INDUSTRIAL ENGINES
Service Letter-China
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Shutoff Solenoid
3408C & 3412C INDUSTRIAL ENGINES
Engine News
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Check For Correct Spring Retainer On Oil Pump Bypass Valve When Oil Pan Is Removed
1980/11/12
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper
1986/03/01
Some 2P4005 Oil Filter Assemblies May Be Difficult To Install
1987/02/01
New Engine Oil Coolers Have Rubber End Sheets
1988/02/01
New Oil Change Recommendations For Severe Applications
1989/08/01
New 4C5084 Oil Filter Cutter Replaces Former 6V7905 Filter Cutter
1990/11/01
Installation Procedure For 1R-0716 Engine Oil Filter {1318}
1994/06/01
Lubrication Recommendations For Locomotive Engines{1318}
1994/11/01
New Oil for All Engines Burning Low-Sulfur Fuel (0.05% or less) Except The 3600 Family Of Engines{1318}
1995/02/01
New High Efficiency Oil Filters are Now Available {1308}
2004/03/01
Special Instruction
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Service Letter-NACD
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Fuel Filter Base
3408C & 3412C INDUSTRIAL ENGINES
Engine Oil Filters And Bypass Valves
3408C & 3412C INDUSTRIAL ENGINES
Duplex Oil Filters
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Engine Oil Filter Base
3408B and 3408C Industrial and Marine Engines
Service Letter-China
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Oil Bypass Valve
3408C & 3412C INDUSTRIAL ENGINES
Oil Filter Base
3408C & 3412C INDUSTRIAL ENGINES
Oil Cooler
3408C & 3412C INDUSTRIAL ENGINES
Oil Bypass Valves (Industrial Engine)
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Oil Filter Base (Industrial Engine)
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Oil Filter Base (Marine Engine)
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Oil Bypass Valves (Marine Engine)
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Service Magazine
Check For Correct Spring Retainer On Oil Pump Bypass Valve When Oil Pan Is Removed{1315,1302}
1980/11/17
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
Added Methods To Decrease The Effects Of High Sulfur Fuels{1355,1280,1318,1000}
1982/08/30
New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27
Engine Maintenance Information Films Available{1318,1352,0375}
1983/09/05
Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10
Change Wiring To Prevent Low Oil Pressure Shutdown Immediately After Start-Up {4450}
1986/07/28
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Some 2P4005 Oil Filter Assemblies May Be Difficult To Install{1318}
1987/02/16
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
New Engine Oil Coolers Have Rubber End Sheets {1378}
1988/01/25
Stronger Suction Bell Assembly Now Used In Engine Oil Lines Group{1318,1307}
1979/02/05
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
New Oil Change Recommendations For Severe Applications{0374,1302}
1989/08/14
Installation Procedure For 1R-0716 Engine Oil Filter{1318}
1994/06/20
Color Coded Dust Caps for S·O·S Ports Will Be Available {7770}
2003/12/01
New High Efficiency Oil Filters are Now Available {1308}
2004/03/22
New High Efficiency Oil Filters are Now Available {1308}
2006/08/21
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Engine News
Stronger Suction Bell Assembly Now Used In Engine Oil Lines Group
1979/03/07
Mechanical Shutoff Groups Changed To Prevent Vibration Of Oil Line Tubes
1982/11/10
New Drain Plug And O-ring Seal Used In Oil Pan Groups
1991/05/01
New Oil Drain Assembly Used; Be Sure To Correctly Tighten Drain Plugs, Port Plugs, And Pipe Plugs In Oil Pans
1991/06/01
External (Outside) Oil Lines Now Used Instead Of The Oil Passage In The Cylinder Block And Flywheel Housing
1978/05/03
Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line
1978/07/05
A New Integral Seal Provides Improved Sealing {7555}
2003/12/01
Special Instruction
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Disassembly and Assembly
Engine Oil Cooler And Cooler Lines (Marine Engine)
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Service Magazine
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
Added Methods To Decrease The Effects Of High Sulfur Fuels{1355,1280,1318,1000}
1982/08/30
Mechanical Shutoff Groups Changed To Prevent Vibration Of Oil Line Tubes{7418}
1982/11/08
Repair Of Drain Plug Threads In Oil Pan{1302}
1984/04/23
Stronger Suction Bell Assembly Now Used In Engine Oil Lines Group{1318,1307}
1979/02/05
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
New Oil Change Recommendations For Severe Applications{0374,1302}
1989/08/14
New Drain Plug And O-ring Seal Used In Oil Pan Groups{1302,7553,7555}
1991/05/06
New Oil Drain Assembly Used; Be Sure To Correctly Tighten Drain Plugs, Port Plugs, And Pipe Plugs In Oil Pans{1302}
1991/06/03
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket{1157,1307}
1992/09/21
Installation Procedure For 1R-0716 Engine Oil Filter{1318}
1994/06/20
Engine News
New Turbocharger, Turbocharger Oil Line And Aftercooler Air Lines Group Used
1981/07/15
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
Service Magazine
New Turbocharger, Turbocharger Oil Line And Aftercooler Air Lines Group Used{1052}
1981/07/06
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket{1157,1307}
1992/09/21
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
New Gaskets for the Turbocharger Oil Lines are Now Used {1052, 1307}
2005/06/27
Engine News
Stronger Suction Bell Assembly Now Used In Engine Oil Lines Group
1979/03/07
Visual Checks And Easy Tests Can Be Of Assistance When Troubleshooting Coolant Leakage Into The Lubrication System
1980/07/09
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Check For Correct Spring Retainer On Oil Pump Bypass Valve When Oil Pan Is Removed
1980/11/12
New Oil Change Recommendations For Severe Applications
1989/08/01
New Oil for All Engines Burning Low-Sulfur Fuel (0.05% or less) Except The 3600 Family Of Engines{1318}
1995/02/01
Precision Oil Pump Bearings Now Available
1977/11/09
Service Magazine
Check For Correct Spring Retainer On Oil Pump Bypass Valve When Oil Pan Is Removed{1315,1302}
1980/11/17
Different O-Ring Seal Now Used On The Oil Pump Suction Tube{1307,1304}
1980/12/01
Different O-Ring Seal Now Used On The Oil Pump Suction Tube{1307,1304}
1981/02/16
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Added Methods To Decrease The Effects Of High Sulfur Fuels{1355,1280,1318,1000}
1982/08/30
New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27
Mechanical Shutoff Groups Changed To Prevent Vibration Of Oil Line Tubes{7418}
1982/11/08
Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Oil Total Base Number (TBN) Test Kit Available{1300}
1986/01/20
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10
Change Wiring To Prevent Low Oil Pressure Shutdown Immediately After Start-Up {4450}
1986/07/28
Precision Oil Pump Bearings Now Available{1304}
1977/11/07
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
New Oil Pressure Sender Assembly Used{7455}
1988/11/07
Stronger Suction Bell Assembly Now Used In Engine Oil Lines Group{1318,1307}
1979/02/05
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
New Oil Change Recommendations For Severe Applications{0374,1302}
1989/08/14
Installation Procedure For 1R-0716 Engine Oil Filter{1318}
1994/06/20
Improved Prelube Pressure Switch Available {1400,1435,1319}
1995/09/11
Special Instruction
Installation and Operation of the Cat QuickEvac<SUP>TM</SUP> System{0707, 1325}
Installation and Operation of the Cat QuickEvacTM System{0707, 1325}
Supplement to the Operation and Maintenance Manual{0707}
Supplement to the Operation and Maintenance Manual{0707}
Service Magazine
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
New QuickEvac High Speed Oil Change Arrangements Are Available {1325}
2006/09/25
Special Instruction
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Engine News
Check For Correct Spring Retainer On Oil Pump Bypass Valve When Oil Pan Is Removed
1980/11/12
Different O-Ring Seal Now Used On The Oil Pump Suction Tube
1980/12/10
Different O-Ring Seal Now Used On The Oil Pump Suction Tube
1981/04/01
New Oil Pump Gears Used
1986/07/01
Change Wiring To Prevent Low Oil Pressure Shutdown Immediately After Start-Up
1986/08/01
Precision Oil Pump Bearings Now Available
1977/11/09
Different Housings are Used on 3400 Remanufactured Engines {1304}
2007/04/09
Identifying Oil Pumps on Certain 3400, C27, and C32 Engines {1304}
Identifying Oil Pumps on Certain 3400, C27, and C32 Engines {1304}
Special Instruction
Installation of 0R0918 Remanufactured Oil Pump{1304, 7754}
Installation of 0R0918 Remanufactured Oil Pump{1304, 7754}
3400 Engine Oil Pumps{1304}
3400 Engine Oil Pumps{1304}
Technical Information Bulletin
Remanufactured Oil Pumps May Have a Shallow Suction Tube Port on Certain 3400 Engines{1304}
Remanufactured Oil Pumps May Have a Shallow Suction Tube Port on Certain 3400 Engines{1304}
Specifications
Engine Oil Pump
3408C & 3412C INDUSTRIAL ENGINES
Oil Pressure And Water Temperature Shutoff Assembly
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Gauges For Engine Oil Pressure
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Sending Units For Oil Pressure
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Gauges For Gear Oil Pressure
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Sending Unit For Gear Oil Pressure
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Engine Oil Pump
3408B and 3408C Industrial and Marine Engines
Engine Oil Pump
3408B and 3408C Industrial and Marine Engines
Reuse And Salvage Guidelines
Reuse and Salvage for 3044, 3046, 3064, 3066, 3400, 3500, and C175 Engine Oil Pumps {1304, 1315}
Reuse and Salvage for 3044, 3046, 3064, 3066, 3400, 3500, and C175 Engine Oil Pumps {1304, 1315}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Oil Pump
3408C & 3412C INDUSTRIAL ENGINES
Oil Pump
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Service Magazine
Check For Correct Spring Retainer On Oil Pump Bypass Valve When Oil Pan Is Removed{1315,1302}
1980/11/17
Different O-Ring Seal Now Used On The Oil Pump Suction Tube{1307,1304}
1980/12/01
Different O-Ring Seal Now Used On The Oil Pump Suction Tube{1307,1304}
1981/02/16
New Oil Pump Gears Used {1304}
1986/07/07
Change Wiring To Prevent Low Oil Pressure Shutdown Immediately After Start-Up {4450}
1986/07/28
Precision Oil Pump Bearings Now Available{1304}
1977/11/07
New Oil Pressure Sender Assembly Used{7455}
1988/11/07
Identifying Oil Pumps on Certain 3400, C27, and C32 Machine Engines {1304}
Identifying Oil Pumps on Certain 3400, C27, and C32 Machine Engines {1304}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/01
Engine News
Oil Total Base Number (TBN) Test Kit Available
1986/02/01
New 4C5084 Oil Filter Cutter Replaces Former 6V7905 Filter Cutter
1990/11/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/01
Reuse And Salvage Guidelines
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Contamination Control Guidelines
Service Magazine
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/01
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Engine News
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01

Truck sale:

1986 CAT 3408B
USD $34,000 
1986 CAT 3408B

Empire Power Systems
PHOENIX, Arizona
CAT 3408B
USD $9,228 
CAT 3408B

The Dutch Engine and Pump Company BV
Ridderkerk, The Netherlands
CAT 3408B
Call 
CAT 3408B

Coastal Power & Equipment
Texas
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.