AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1W-8856 CLUTCH GP PART OF 1W-8857 POWER TAKE-OFF GP AN ATTACHMENT 3408 ENGINE - MACHINE


BASIC ENGINE
CLUTCH GP

ENGINE - MACHINE 3408 ENGINE - MACHINE 67U
 3408B Industrial Engine 67U11092-UP SEBP1518 3408 67U   (2018)

BASIC ENGINE

CLUTCH GP
CLUTCH AS
3N-4128 CLUTCH AS
CLUTCH GP
1W-8856 CLUTCH GP
CLUTCH GP
2W-4902 CLUTCH GP
CLUTCH GP
2W-4908 CLUTCH GP
CLUTCH GP
2W-4910 CLUTCH GP
 

#SEBP15180040
 

1W-8856: CLUTCH GP

1W-8856 CLUTCH GP
PART OF 1W-8857 POWER TAKE-OFF GP
AN ATTACHMENT
i00354121 SEBP1518
1W8856 CLUTCH GP Parts scheme 1W8856 CLUTCH GP Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1L-7796 [1] KEY  
2. 1L-5015 [1] PLATE-CLUTCH  
3. 4L-3527 [3] PLATE-CLUTCH DRIVING  
4. 3N-8125 [1] PLATE AS-PRESSURE  
  3N-8124 [1] SPRING  
  3N-8123 [1] LOCK PIN  
5. 3F-3728 [1] RING-SNAP  
6. 1L-4863 [8] WASHER-SPRING  
7. 6L-3972 [4] PIN  
8. 4H-0002 [4] LEVER  
9. 6L-3961 [4] PIN-COTTER  
10. 4B-4721 [8] LINK  
11. 6L-3967 [8] PIN  
12. 6L-3964 [8] PIN-COTTER  
13. 5B-2410 [1] HOSE AS  
14. 4B-4716 [1] COLLAR AS-SLEEVE  
  0L-0639 [2] BOLT (3/8-24X2.25-IN)  
  2L-6267 [2] LOCKNUT (3/8-24-THD)  
  4B-4758 B [2] SHIM (0.06-IN THK)  
15. 6B-3223 [2] CUP-BEARING  
16. 4B-7270 [2] CONE-BEARING  
17. 4B-4764 [1] NUT  
18. 4B-4773 [1] LOCK  
19. 5L-3486 [1] RING-DRIVE  
20. 3H-9571 [2] PLATE-CENTER  
21. 3H-9572 [1] RING-ADJUSTMENT  
22. 3H-9574 [1] SLEEVE (SLIDING)  
23. 4B-4792 [1] YOKE AS  
  0S-1591 [2] BOLT (3/8-16X1.5-IN)  
  3B-4506 [2] LOCKWASHER  
24. 6L-5151 [2] KEY-WOODRUFF  
25. 3L-0648 [1] SHAFT-OPERATING  
26. 5B-2404 [1] RETAINER-BEARING  
27. 5B-2407 [1] LOCK  
28. 0S-1617 [1] BOLT (5/16-18X0.75-IN)  
  3F-9556 [1] LOCKWASHER  
29. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)(CLUTCH)  
30. 6F-0253 [1] LOCKWASHER  
31. 9S-1354 [1] NUT (5/8-18-THD)  
32. 0S-1587 [2] BOLT (1/2-13X1.75-IN)  
33. 1L-6931 [2] SCREW AS-MACHINE (1/4-20X0.5-IN)  
34. 8B-7121 [2] FITTING-HYDRAULIC (CLUTCH)  
35. 1A-1460 [4] BOLT (1/2-13X2-IN)  
36. 3B-4508 [6] LOCKWASHER  
37. 5B-2406 [1] CARRIER  
38. 5N-1932 [1] SHAFT-CLUTCH  
39. 1L-5014 [1] HOUSING-CLUTCH  
40. 4B-4810 [1] LEVER AS-HAND  
41. 0S-1587 [1] BOLT (1/2-13X1.75-IN)  
42. 108-3561 [1] PLATE-INSTRUCTION (POWER TAKE-OFF)  
  B   USE AS REQUIRED
 

#SEBP15180041
 

2W-4902: CLUTCH GP

2W-4902 CLUTCH GP
PART OF 2W-4903 POWER TAKE-OFF GP
AN ATTACHMENT
i00359259 SEBP1518
2W4902 CLUTCH GP Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4L-3527 [2] PLATE-CLUTCH DRIVING  
2. 5L-9652 [1] HUB  
3. 8B-7987 [1] KEY-WOODRUFF  
4. 5L-9653 [1] NUT  
  5L-9654 [1] LOCK  
5. 3H-9571 [1] PLATE-CENTER  
6. 5N-9317 [1] RING-DRIVE  
7. 7F-8897 [1] PLATE  
8. 3H-9572 [1] RING-ADJUSTMENT  
9. 3H-9574 [1] SLEEVE  
10. 4B-4754 [1] SHAFT  
  6L-5151 [2] KEY-WOODRUFF  
11. 4B-4792 [1] YOKE AS  
12. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
  3B-4506 [2] LOCKWASHER  
13. 1A-1460 [6] BOLT (1/2-13X2-IN)  
  3B-4508 [6] LOCKWASHER  
14. 5L-9655 [1] RETAINER-BEARING  
15. 9S-1354 [1] NUT (5/8-18-THD)  
  6F-0253 [1] LOCKWASHER  
16. 0S-1617 [1] BOLT (5/16-18X0.75-IN)  
  3F-9556 [1] LOCKWASHER  
  5B-2407 [1] LOCK  
17. 4B-4716 [1] COLLAR AS-SLEEVE  
18. 0L-0639 [2] BOLT (3/8-24X2.25-IN)  
  2L-6267 [2] LOCKNUT (3/8-24-THD)  
  4B-4758 [2] SHIM (0.06-IN THK)  
19. 5B-2410 [1] HOSE AS  
20. 4B-4721 [8] LINK  
  6L-3967 [8] PIN  
  6L-3964 [8] PIN-COTTER  
21. 6L-3972 [4] PIN  
  6L-3961 [4] PIN-COTTER  
  1L-4863 [8] WASHER-SPRING  
22. 4H-0002 [4] LEVER  
23. 2W-7883 [1] PLATE-INSTRUCTION  
24. 3N-8125 [1] PLATE AS-PRESSURE  
25. 3N-8124 [1] SPRING  
  3N-8123 [1] LOCK PIN  
26. 8B-7121 [2] FITTING-HYDRAULIC (CLUTCH)  
27. 3N-4896 [1] SHAFT-CLUTCH  
28. 1L-6931 [4] SCREW AS-MACHINE (1/4-20X0.5-IN)  
29. 6B-3223 [2] CUP-BEARING  
30. 4B-7270 [2] CONE-BEARING  
31. 4B-4810 [1] LEVER AS-HAND  
32. 7F-8916 [1] CARRIER-BEARING  
33. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)(CLUTCH)  
34. 7W-7155 C [1] HOUSING-CLUTCH  
   
    AVAILABLE REPAIR KIT(S):
  3N-4128 Y [1] CLUTCH AS  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15180042
 

2W-4908: CLUTCH GP

2W-4908 CLUTCH GP
PART OF 2W-4909 POWER TAKE-OFF GP
AN ATTACHMENT
i00359283 SEBP1518
2W4908 CLUTCH GP Parts scheme 2W4908 CLUTCH GP Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4B-4810 [1] LEVER AS-HAND  
  0S-1587 [1] BOLT (1/2-13X1.75-IN)  
2. 6L-3969 [4] PIN  
  6L-3964 [8] PIN-COTTER  
3. 6L-3970 [4] PIN  
4. 3N-8427 [1] CARRIER AS-BEARING  
  9F-2247 [1] PLUG-PIPE  
5. 2W-4904 [2] RING-SEAL  
6. 5L-3495 [8] LINK-LEVER  
7. 2L-6010 [2] PLUG-PIPE  
8. 5L-1545 [2] CUP-BEARING  
  7L-6551 [2] CONE-BEARING  
9. 5L-3556 B [1] SHIM (0.0200-IN THK)  
  5L-3557 B [1] SHIM (0.010-IN THK)  
  5L-3558 B [1] SHIM (0.007-IN THK)  
  5L-3559 B [1] SHIM (0.005-IN THK)  
10. 5L-3613 [1] RETAINER-BEARING  
11. 0S-1594 [6] BOLT (3/8-16X1-IN)  
  5L-3560 [3] PLATE-LOCK  
12. 5L-3553 [1] YOKE  
13. 5L-3485 [1] SHAFT-CLUTCH LEVER  
  6L-5151 [2] KEY-WOODRUFF  
14. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
15. 3N-1462 [1] PIN AS  
16. 3N-1461 [1] SPRING  
17. 5L-3602 [1] PLATE-PRESSURE  
18. 4P-3020 [3] PLATE-DRIVE  
19. 3N-9175 [1] RING-DRIVE  
20. 4B-4773 [1] LOCK  
21. 4B-4764 [1] NUT  
22. 3N-9176 [1] KEY  
23. 3N-9178 [1] PLATE-HUB & BACK  
24. 5L-3603 [2] PLATE AS-CENTER  
25. 6L-4016 [4] PIN  
26. 6L-3961 [4] PIN-COTTER  
27. 5L-3493 [4] LEVER  
28. 5L-3492 [1] YOKE-ADJUSTMENT  
29. 5L-3496 [1] SLEEVE-SLIDING  
30. 0S-1625 [8] BOLT (5/8-11X2.5-IN)  
31. 5L-3487 [1] COLLAR AS  
31A. 5L-3561 B [2] SHIM (0.06-IN THK)  
31B. 2L-6267 [2] LOCKNUT (3/8-24-THD)  
31C. 0L-1648 [2] BOLT (3/8-24X2.5-IN)  
32. 5B-2410 [1] HOSE AS  
33. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)(CLUTCH)  
  9S-1354 [1] NUT (5/8-18-THD)  
  6F-0253 [1] LOCKWASHER  
34. 1L-6931 [2] SCREW AS-MACHINE (1/4-20X0.5-IN)  
35. 108-3561 [1] PLATE-INSTRUCTION (POWER TAKE-OFF)  
36. 5L-3617 [1] SEAL-RUBBER  
37. 3N-9179 [1] HOUSING-CLUTCH  
  8B-7121 [2] FITTING-HYDRAULIC (CLUTCH)  
38. 4B-9782 [1] BALL  
39. 3N-9180 [1] SHAFT-CLUTCH  
40. 5P-3499 [1] BALL BEARING  
  B   USE AS REQUIRED
 

#SEBP15180043
 

2W-4910: CLUTCH GP

2W-4910 CLUTCH GP
PART OF 2W-4911 POWER TAKE-OFF GP
AN ATTACHMENT
i00359294 SEBP1518
2W4910 CLUTCH GP Parts scheme 2W4910 CLUTCH GP Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)(CLUTCH)  
2. 6F-0253 [1] LOCKWASHER  
3. 9S-1354 [1] NUT (5/8-18-THD)  
4. 0S-1587 [2] BOLT (1/2-13X1.75-IN)  
5. 1L-6931 [2] SCREW AS-MACHINE (1/4-20X0.5-IN)  
6. 8B-7121 [2] FITTING-HYDRAULIC  
7. 1A-1460 [4] BOLT (1/2-13X2-IN)  
8. 3B-4508 [6] LOCKWASHER  
9. 5B-2406 [1] CARRIER  
10. 5N-1932 [1] SHAFT-CLUTCH  
11. 4L-3528 [1] HOUSING-CLUTCH  
12. 4W-2653 C [1] LEVER AS-HAND  
  0S-1587 [1] BOLT (1/2-13X1.75-IN)  
13. 5B-2410 [1] HOSE AS  
14. 2W-7883 [1] PLATE-INSTRUCTION  
15. 1L-7796 [1] KEY  
16. 1L-5015 [1] PLATE-CLUTCH  
17. 4L-3527 [3] PLATE-CLUTCH DRIVING  
18. 3N-8125 [1] PLATE AS-PRESSURE  
  3N-8124 [1] SPRING  
  3N-8123 [1] LOCK PIN  
19. 1L-4863 [8] WASHER-SPRING  
20. 6L-3972 [4] PIN  
21. 4H-0002 [4] LEVER  
22. 6L-3961 [4] PIN-COTTER  
23. 4B-4721 [8] LINK  
24. 6L-3967 [8] PIN  
25. 6L-3964 [8] PIN-COTTER  
26. 4B-4716 [1] COLLAR AS-SLEEVE  
27. 0L-0639 [2] BOLT (3/8-24X2.25-IN)  
  2L-6267 [2] LOCKNUT (3/8-24-THD)  
  4B-4758 B [2] SHIM (0.06-IN THK)  
28. 6B-3223 [2] CUP-BEARING  
29. 4B-7270 [2] CONE-BEARING  
30. 4B-4764 [1] NUT  
31. 4B-4773 [1] LOCK  
32. 5L-3486 [1] RING-DRIVE  
33. 3H-9571 [2] PLATE-CENTER  
34. 3H-9572 [1] RING-ADJUSTMENT  
35. 3H-9574 [1] SLEEVE  
36. 4B-4792 [1] YOKE AS  
37. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
  3B-4506 [2] LOCKWASHER  
38. 6L-5151 [2] KEY-WOODRUFF  
39. 4B-4770 [1] SHAFT  
40. 5B-2404 [1] RETAINER-BEARING  
41. 5B-2407 [1] LOCK  
42. 0S-1617 [1] BOLT (5/16-18X0.75-IN)  
43. 3F-9556 [1] LOCKWASHER  
44. 3F-3728 [1] RING-SNAP  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP15180044
 

2W-4912: CLUTCH GP

2W-4912 CLUTCH GP
PART OF 2W-4913 POWER TAKE-OFF GP
AN ATTACHMENT
i00359318 SEBP1518
2W4912 CLUTCH GP Parts scheme 2W4912 CLUTCH GP Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 108-3633 [1] PLATE-INSTRUCTION (POWER TAKE-OFF)  
2. 108-3560 [1] PLATE-WARNING (POWER TAKE-OFF)  
3. 1A-1460 [2] BOLT (1/2-13X2-IN)  
4. 1B-8737 [2] KEY-WOODRUFF  
5. 1L-6931 [4] SCREW AS-MACHINE (1/4-20X0.5-IN)  
6. 2B-7408 [1] PLUG-PIPE  
7. 2L-4437 [4] LEVER  
8. 2L-4441 [8] WASHER  
9. 2L-7151 [1] NUT  
10. 2L-7152 [1] LOCK  
11. 2L-7153 [1] KEY  
12. 2L-7154 [1] PLATE  
13. 2L-7155 [1] HOUSING-CLUTCH  
14. 2L-7156 [1] PLATE  
15. 2L-7157 [1] RETAINER  
16. 2L-7158 [1] RETAINER  
17. 2L-7159 [1] RING  
18. 2L-7160 [1] SLEEVE  
19. 2L-7161 [1] RING  
20. 2L-7162 [2] PLATE  
21. 2L-7246 [1] BEARING-ROLLER  
22. 3B-4506 [6] LOCKWASHER  
23. 3B-4510 [6] LOCKWASHER (CLUTCH)  
24. 3B-4615 [4] PIN-COTTER  
25. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
26. 3H-9575 [1] LOCK PIN  
27. 4B-4760 [8] LINK  
28. 4B-4775 [1] HOSE AS  
29. 4L-6105 [3] PLATE-DRIVE  
30. 4W-2655 [1] LEVER-HAND CONTROL  
31. 5F-0229 [1] SPRING  
32. 5L-9423 [1] PLATE-COVER  
33. 5N-1934 [1] SHAFT-CLUTCH  
34. 5N-8132 [1] RING-DRIVE  
35. 6F-0253 [1] LOCKWASHER  
36. 6F-6580 [1] COLLAR AS-CONE  
  0L-1558 [2] BOLT (1/2-20X3.25-IN)  
  2K-0564 [2] LOCKNUT (1/2-20-THD)  
  4B-4723 [2] SHIM  
37. 6F-6581 [1] YOKE-CLUTCH  
38. 6F-6582 [1] SHAFT-OPERATING  
39. 6L-3971 [8] PIN  
40. 6L-3973 [4] PIN  
41. 7J-5925 [8] PIN-COTTER  
42. 8B-7121 [2] FITTING-HYDRAULIC  
43. 9B-0453 [2] LOCKWASHER (CLUTCH)  
44. 9S-1354 [1] NUT (5/8-18-THD)  
45. 9X-8882 [6] BOLT (5/8-11X2.5-IN)  
46. 0S-1588 [6] BOLT (3/8-16X1.25-IN)  
 

#SEBP15180045
 

2W-4914: CLUTCH GP

2W-4914 CLUTCH GP
PART OF 2W-4915, 7W-7532 POWER TAKE-OFF GP
AN ATTACHMENT
i00359323 SEBP1518
2W4914 CLUTCH GP Parts scheme 2W4914 CLUTCH GP Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5N-6136 [3] PLATE-DRIVE  
2. 8L-5188 [4] PIN  
  6L-3963 [4] PIN-COTTER  
3. 8L-8457 [1] YOKE-ADJUSTMENT  
4. 8L-5107 [4] LEVER  
5. 8L-5200 [4] PIN  
6. 6L-3962 [8] PIN-COTTER  
7. 8L-5095 [8] LINK-LEVER  
8. 8L-5199 [4] PIN  
9. 8L-5094 [1] RING-COLLAR  
  1B-8702 [1] KEY-WOODRUFF  
10. 8L-5679 [1] RING-RETAINING  
11. 2H-3755 [1] BOLT (5/16-18X0.43-IN)  
  5B-2407 [1] LOCK  
12. 8L-5099 [1] RETAINER-BEARING  
13. 2W-4905 [2] RING-SEAL  
14. 4L-6105 [3] PLATE-DRIVE  
15. 4F-7499 [2] CONE-BEARING  
16. 5D-7449 [2] CUP-BEARING  
17. 8L-5189 [1] SEAL-O-RING  
18. 1B-8737 [2] KEY-WOODRUFF  
19. 1D-4539 [1] BOLT (5/16-18X2.5-IN)  
20. 2W-7876 [1] FORK-THROW-OUT  
21. 8L-5105 [1] COLLAR AS-SLEEVE  
  0V-0375 [2] BOLT (1/2-13X3.25-IN)  
  2K-0564 [2] LOCKNUT (1/2-20-THD)  
  8L-5186 B [2] SHIM (0.06-IN THK)(0.06IN THK)  
22. 8L-8458 [1] SLEEVE-SLIDING  
23. 3N-1462 [1] PIN AS  
24. 8L-8459 [1] PLATE-PRESSURE  
25. 8L-8462 [2] PLATE AS-CENTER  
26. 8L-8460 [1] RING-DRIVE  
27. 8L-8464 [1] HUB & BACKPLATE  
28. 8L-5198 [1] LOCKWASHER  
29. 8L-5185 [1] KEY  
30. 8L-5184 [1] NUT-SHAFT  
31. 4W-2655 [1] LEVER-HAND CONTROL  
32. 3N-9627 [1] SHAFT-CLUTCH  
33. 1H-2415 [1] BOLT (0.5-13X2.5-IN)  
  1D-4719 [1] NUT-FULL (1/2-13-THD)  
34. 8B-7121 [2] FITTING-HYDRAULIC  
35. 2B-0858 [2] PLUG-PIPE  
36. 7H-3171 [1] PLUG-PIPE  
37. 8L-5101 [1] SHAFT  
38. 2W-7879 [1] HOUSING-CLUTCH  
39. 2W-7878 [1] CARRIER AS-BEARING  
40. 0S-1625 [8] BOLT (5/8-11X2.5-IN)  
41. 9B-2515 [1] FITTING-HYDRAULIC (CLUTCH)  
42. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)(CLUTCH)  
43. 9S-1354 [1] NUT (5/8-18-THD)  
  6F-0253 [1] LOCKWASHER  
44. 8L-5096 [1] HOSE AS (41.91CM)  
45. 4M-5317 [1] BUSHING-REDUCER (REDUCING)  
46. 7L-2227 [1] BREATHER (CLUTCH HOUSING)  
47. 1C-0569 [2] BOLT (5/16-18X0.5-IN)  
  B   USE AS REQUIRED
 

#SEBP15180046
 

4P-0410: CLUTCH GP

4P-0410 CLUTCH GP
PART OF 4P-3127 POWER TAKE-OFF GP
AN ATTACHMENT
i00371359 SEBP1518
4P0410 CLUTCH GP Parts scheme 4P0410 CLUTCH GP Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)(CLUTCH)  
2. 6F-0253 [1] LOCKWASHER  
3. 9S-1354 [1] NUT (5/8-18-THD)  
4. 0S-1587 [2] BOLT (1/2-13X1.75-IN)  
5. 1S-7443 [2] SCREW-MACHINE  
6. 8B-7121 [2] FITTING-HYDRAULIC (CLUTCH)  
7. 1A-1460 [4] BOLT (1/2-13X2-IN)  
8. 5P-8245 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 5B-2406 [1] CARRIER  
10. 5N-1932 [1] SHAFT-CLUTCH  
11. 4L-3528 [1] HOUSING-CLUTCH  
12. 4W-2653 [1] LEVER AS-HAND  
  0S-1587 [1] BOLT (1/2-13X1.75-IN)  
13. 5B-2410 [1] HOSE AS  
14. 108-3561 [1] PLATE-INSTRUCTION (POWER TAKE-OFF)  
15. 1H-3338 [2] LOCKWASHER (EXTERNAL TOOTH)  
16. 108-3560 [1] PLATE-WARNING (POWER TAKE-OFF)  
17. 1L-7796 [1] KEY  
18. 1L-5015 [1] PLATE-CLUTCH  
19. 4L-3527 [3] PLATE-CLUTCH DRIVING  
20. 3N-8125 [1] PLATE AS-PRESSURE  
  3N-8123 [1] LOCK PIN  
  3N-8124 [1] SPRING  
21. 1L-4863 [8] WASHER-SPRING  
22. 6L-3972 [4] PIN  
23. 4H-0002 [4] LEVER  
24. 3B-4627 [4] PIN-COTTER  
25. 4B-4721 [8] LINK  
26. 6L-3967 [8] PIN  
27. 3B-5301 [8] PIN-COTTER  
28. 4B-4716 [1] COLLAR AS-SLEEVE  
29. 0L-0639 [2] BOLT (3/8-24X2.25-IN)  
  2L-6267 [2] LOCKNUT (3/8-24-THD)  
  4B-4758 B [2] SHIM (0.06-IN THK)  
30. 6B-3223 [2] CUP-BEARING  
31. 4B-7270 [2] CONE-BEARING  
32. 4B-4764 [1] NUT  
33. 4B-4773 [1] LOCK  
34. 5L-3486 [1] RING-DRIVE  
35. 3H-9571 [2] PLATE-CENTER  
36. 3H-9572 [1] RING-ADJUSTMENT  
37. 3H-9574 [1] SLEEVE  
38. 4B-4792 [1] YOKE AS  
39. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
  3B-4506 [2] LOCKWASHER  
40. 6L-5151 [2] KEY-WOODRUFF  
41. 4B-4770 [1] SHAFT  
42. 5B-2404 [1] RETAINER-BEARING  
43. 5B-2407 [1] LOCK  
44. 0S-1617 [1] BOLT (5/16-18X0.75-IN)  
45. 3F-9556 [1] LOCKWASHER  
46. 3F-3728 [1] RING-SNAP  
  B   USE AS REQUIRED
 

#SEBP15180047
 

4P-3068: CLUTCH GP

4P-3068 CLUTCH GP
PART OF 112-1718, 4P-3069 POWER TAKE-OFF GP
AN ATTACHMENT
i00375409 SEBP1518
4P3068 CLUTCH GP Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-8460 [1] RING-DRIVE  
2. 7C-8373 [1] SHAFT-STUB  
3. 8L-5159 [1] BALL BEARING  
4. 1A-8063 [1] BOLT (3/4-10X2.5-IN)  
5. 7C-3872 [1] WASHER-RETAINING  
6. 7C-3871 B [1] SHIM-RETAINER (0.13-MM THK)  
  7C-3877 B [1] SHIM-RETAINER (0.18-MM THK)  
  7C-3878 B [1] SHIM-RETAINER (0.51-MM THK)  
7. 7W-7535 [1] HUB  
8. 5N-6136 [3] PLATE-DRIVE  
9. 8L-8462 [2] PLATE AS-CENTER  
10. 8L-8459 [1] PLATE-PRESSURE  
11. 6L-3963 [4] PIN-COTTER  
12. 8L-5107 [4] LEVER  
13. 8L-5188 [4] PIN  
14. 8L-8457 [1] YOKE-ADJUSTMENT  
15. 6L-3962 [8] PIN-COTTER  
16. 8L-5095 [8] LINK-LEVER  
17. 8L-5200 [4] PIN  
18. 8L-5199 [4] PIN  
19. 8L-8458 [1] SLEEVE-SLIDING  
20. 8L-5105 [1] COLLAR AS-SLEEVE  
21. 2K-0564 [2] LOCKNUT (1/2-20-THD)  
22. 8L-5186 B [2] SHIM (0.06-IN THK)  
23. 0V-0375 [2] BOLT (1/2-13X3.25-IN)  
24. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)(CLUTCH)  
25. 9S-1354 [1] NUT (5/8-18-THD)  
26. 6F-0253 [1] LOCKWASHER  
27. 4M-5317 [1] BUSHING-REDUCER  
28. 8L-5096 [1] HOSE AS  
29. 8B-7121 [2] FITTING-HYDRAULIC (CLUTCH)  
30. 2W-7879 [1] HOUSING-CLUTCH  
31. 8L-5094 [1] RING-COLLAR  
32. 1C-0569 [2] BOLT (5/16-18X0.5-IN)  
33. 8L-5679 [1] RING-RETAINING  
34. 3N-1462 [1] PIN AS  
35. 3N-1461 [1] SPRING  
36. 2H-3755 [1] BOLT (5/16-18X0.43-IN)  
37. 5B-2407 [1] LOCK  
38. 8L-5099 [1] RETAINER-BEARING  
39. 1B-8702 [1] KEY-WOODRUFF  
40. 6V-8234 [1] PIN-SPRING  
41. 5D-7449 [2] CUP-BEARING  
42. 6B-8575 [1] KEY-SQUARE  
43. 7W-7534 [1] SHAFT  
44. 9Y-4298 [1] PLATE-INSTRUCTION (POWER TAKE-OFF)  
45. 4F-7499 [2] CONE-BEARING  
46. 4B-9782 [1] BALL  
47. 2W-7878 [1] CARRIER AS-BEARING  
48. 0S-1625 [8] BOLT (5/8-11X2.5-IN)  
49. 2W-4905 [2] RING-SEAL  
50. 2B-0858 [2] PLUG-PIPE  
51. 7H-3171 [1] PLUG-PIPE  
52. 4W-2655 [1] LEVER-HAND CONTROL  
53. 2W-7876 [1] FORK-THROW-OUT  
54. 1D-4539 [1] BOLT (5/16-18X2.5-IN)  
55. 8L-5101 [1] SHAFT  
56. 1B-8737 [2] KEY-WOODRUFF  
  B   USE AS REQUIRED
 

#SEBP15180048
 

4P-3073: CLUTCH GP

4P-3073 CLUTCH GP
PART OF 4P-3074 POWER TAKE-OFF GP
FOR USE WITH SAE NO. 1 FLYWHEEL AND FLYWHEEL HOUSING
AN ATTACHMENT
i00375417 SEBP1518
4P3073 CLUTCH GP Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4L-3527 [2] PLATE-CLUTCH DRIVING  
2. 5L-9652 [1] HUB  
3. 8B-7987 [1] KEY-WOODRUFF  
4. 5L-9653 [1] NUT  
  5L-9654 [1] LOCK  
5. 3H-9571 [1] PLATE-CENTER  
6. 5N-9317 [1] RING-DRIVE  
7. 7F-8897 [1] PLATE  
8. 3H-9572 [1] RING-ADJUSTMENT  
9. 3H-9574 [1] SLEEVE  
10. 4B-4754 [1] SHAFT  
  6L-5151 [2] KEY-WOODRUFF  
11. 4B-4792 [1] YOKE AS  
12. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
  3B-4506 [2] LOCKWASHER  
13. 1A-1460 [6] BOLT (1/2-13X2-IN)  
  5P-8245 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 5L-9655 [1] RETAINER-BEARING  
15. 9S-1354 [1] NUT (5/8-18-THD)  
  6F-0253 [1] LOCKWASHER  
16. 4B-4716 [1] COLLAR AS-SLEEVE  
17. 0L-0639 [2] BOLT (3/8-24X2.25-IN)  
  2L-6267 [2] LOCKNUT (3/8-24-THD)  
  4B-4758 B [2] SHIM (0.06-IN THK)  
18. 0S-1617 [1] BOLT (5/16-18X0.75-IN)  
  3F-9556 [1] LOCKWASHER  
  5B-2407 [1] LOCK  
19. 5B-2410 E [1] HOSE AS (38.1-CM)  
20. 4B-4721 [8] LINK  
  6L-3967 [8] PIN  
  3B-5301 [8] PIN-COTTER  
21. 6L-3972 [4] PIN  
  3B-4627 [4] PIN-COTTER  
  1L-4863 [8] WASHER-SPRING  
22. 4H-0002 [4] LEVER  
23. 108-3561 [1] PLATE-INSTRUCTION (POWER TAKE-OFF)(SERVICING)  
24. 3N-8125 [1] PLATE AS-PRESSURE  
25. 3N-8124 [1] SPRING  
  3N-8123 [1] LOCK PIN  
26. 8B-7121 [2] FITTING-HYDRAULIC (CLUTCH)  
27. 3N-4896 [1] SHAFT-CLUTCH  
28. 1S-7443 [4] SCREW-MACHINE  
  1H-3338 [4] LOCKWASHER (EXTERNAL TOOTH)  
29. 6B-3223 [2] CUP-BEARING  
30. 4B-7270 [2] CONE-BEARING  
31. 4B-4810 [1] LEVER AS-HAND  
32. 7F-8916 [1] CARRIER-BEARING  
33. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)(CLUTCH)  
34. 7W-7155 [1] HOUSING-CLUTCH  
35. 108-3560 [1] PLATE-WARNING (POWER TAKE-OFF)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
 

#SEBP15180049
 

7C-3045: CLUTCH GP

7C-3045 CLUTCH GP
S/N 67U11135-UP
PART OF 7C-3046 POWER TAKE-OFF GP
AN ATTACHMENT
i00404408 SEBP1518
7C3045 CLUTCH GP Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-8460 [1] RING-DRIVE  
2. 7C-8373 [1] SHAFT-STUB  
3. 8L-5159 [1] BALL BEARING  
4. 1A-8063 [1] BOLT (3/4-10X2.5-IN)  
5. 7C-3872 [1] WASHER-RETAINING  
6. 7C-3871 B [1] SHIM-RETAINER (0.13-MM THK)  
  7C-3877 B [1] SHIM-RETAINER (0.18-MM THK)  
  7C-3878 B [1] SHIM-RETAINER (0.51-MM THK)  
7. 7W-7535 [1] HUB  
8. 5N-6136 [3] PLATE-DRIVE  
9. 8L-8462 [2] PLATE AS-CENTER  
10. 8L-8459 [1] PLATE-PRESSURE  
11. 6L-3963 [4] PIN-COTTER  
12. 8L-5107 [4] LEVER  
13. 8L-5188 [4] PIN  
14. 8L-8457 [1] YOKE-ADJUSTMENT  
15. 6L-3962 [8] PIN-COTTER  
16. 8L-5095 [8] LINK-LEVER  
17. 8L-5200 [4] PIN  
18. 8L-5199 [4] PIN  
19. 8L-8458 [1] SLEEVE-SLIDING  
20. 8L-5105 [1] COLLAR AS-SLEEVE  
21. 2K-0564 [2] LOCKNUT (1/2-20-THD)  
22. 8L-5186 B [2] SHIM (0.06-IN THK)(0.06IN THK)  
23. 0V-0375 [2] BOLT (1/2-13X3.25-IN)  
24. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)(CLUTCH)  
25. 9S-1354 [1] NUT (5/8-18-THD)  
26. 6F-0253 [1] LOCKWASHER  
27. 4M-5317 [1] BUSHING-REDUCER  
28. 8L-5096 [1] HOSE AS  
29. 8B-7121 [2] FITTING-HYDRAULIC (CLUTCH)  
30. 2W-7879 [1] HOUSING-CLUTCH  
31. 8L-5094 [1] RING-COLLAR  
32. 1C-0569 [2] BOLT (5/16-18X0.5-IN)  
33. 8L-5679 [1] RING-RETAINING  
34. 3N-1462 [1] PIN AS  
35. 3N-1461 [1] SPRING  
36. 2H-3755 [1] BOLT (5/16-18X0.43-IN)  
37. 5B-2407 [1] LOCK  
38. 8L-5099 [1] RETAINER-BEARING  
39. 1B-8702 [1] KEY-WOODRUFF  
40. 6V-8234 [1] PIN-SPRING  
41. 5D-7449 [2] CUP-BEARING  
42. 6B-8575 [1] KEY-SQUARE  
43. 7W-7534 [1] SHAFT  
44. 9Y-4298 C [1] PLATE-INSTRUCTION  
45. 4F-7499 [2] CONE-BEARING  
46. 4B-9782 [1] BALL  
47. 2W-7878 [1] CARRIER AS-BEARING  
48. 0S-1625 [8] BOLT (5/8-11X2.5-IN)  
49. 2W-4905 [2] RING-SEAL  
50. 2B-0858 [2] PLUG-PIPE  
51. 7H-3171 [1] PLUG-PIPE  
52. 4W-2655 [1] LEVER-HAND CONTROL  
53. 2W-7876 [1] FORK-THROW-OUT  
54. 1D-4539 [1] BOLT (5/16-18X2.5-IN)  
55. 8L-5101 [1] SHAFT  
56. 1B-8737 [2] KEY-WOODRUFF  
  2S-3230 CF LUBRICANT-BEARING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
 

Information:

Engine News
Use Correct Installation Procedure For Clutch Pilot Bearing In Rear Power Takeoff
1979/08/08
Installation Of Rear Bearing Oil Seals In 3N6542, 3N8617, And 3N8618 Rear Power Takeoff Clutch Groups
1981/05/20
New Dust Covers Available For Twin Disc IBF318 And IBF321 Rear Power Take-Off Clutches
1983/09/14
New Rear Power Takeoff Clutch Plates Do Not Contain Asbestos
1990/12/01
Conversion Kit Available For Clutch Used In Morbark Chippers{3055}
1994/05/01
Correct Procedure To Adjust Front Power Takeoff Clutches
1978/09/27
Special Instruction
Installation Of 5N1678 Rear Power Take-Off Clutch Support Group{1007}
Installation Of 5N1678 Rear Power Take-Off Clutch Support Group{1007}
Procedure For Conversion From Oil Lubrication To Grease Lubrication For Rear Power Takeoff Clutches{3055}
Procedure For Conversion From Oil Lubrication To Grease Lubrication For Rear Power Takeoff Clutches{3055}
Specifications
Power Take-Off Clutch
3408C & 3412C INDUSTRIAL ENGINES
Front Power Take-Off Clutch Groups<BR> (5N7329 &amp; 5N7330)
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Rear Power Take-Off Clutch Groups
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS
Service Magazine
Installation Of Rear Bearing Oil Seals In 3N6542, 3N8617, And 3N8618 Rear Power Takeoff Clutch Groups{3055}
1981/05/11
Correct Procedure To Adjust Front Power Takeoff Clutches{3055}
1978/09/04
Use Correct Installation Procedure For Clutch Pilot Bearing In Rear Power Takeoff{3055}
1979/08/06
New Rear Power Takeoff Clutch Plates Do Not Contain Asbestos{3055,3404}
1990/12/10
Clutch (PTO) Warranty On Morbark Industries Products Powered By Caterpillar Engines{7758}
1992/07/20
Lubrication Change On Twin Disc Power Take-Off's (PTO's){3055}
1994/08/22

Caterpillar Parts SIS Catalog 3408 :

CLUTCH AS
3N-4128 CLUTCH AS
CAMSHAFT GP
4N-0963 CAMSHAFT GP
196-9524 BEARING GP-MAIN
BARRING GP
5R-7425 BARRING GP
BARRING GP
253-2468 BARRING GP
BALANCER GP
4N-1092 BALANCER GP
AIR COMPRESSOR GP
9N-5563 AIR COMPRESSOR GP
AIR COMPRESSOR GP
9N-0724 AIR COMPRESSOR GP
CLUTCH GP
2W-4902 CLUTCH GP
CLUTCH GP
2W-4908 CLUTCH GP
CLUTCH GP
2W-4910 CLUTCH GP
CLUTCH GP
2W-4912 CLUTCH GP
CLUTCH GP
2W-4914 CLUTCH GP
CLUTCH GP
4P-0410 CLUTCH GP
CLUTCH GP
4P-3068 CLUTCH GP
CLUTCH GP
4P-3073 CLUTCH GP

Truck sale:

Caterpillar 3408 IND, Construction
45,000 
Caterpillar 3408 IND, Construction
- Industrial engines
LOUISIANA CAT POWER SYSTEMS
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.