AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2W-9054 PISTON & ROD GP S/N 67U15105-UP 15.6:1 RATIO Type 1 FOR USE WITH @@@@@442-5359@@@@@ 3408 ENGINE - MACHINE


BASIC ENGINE
PISTON & ROD GP
CYLINDER HEAD GP
CYLINDER BLOCK GP
POWER TAKE-OFF GP

ENGINE - MACHINE 3408 ENGINE - MACHINE 67U
 3408B Industrial Engine 67U11092-UP SEBP1518 3408 67U   (2018)

BASIC ENGINE

PISTON & ROD GP
442-5359 KIT-CYLINDER PACK
PISTON & ROD GP
2W-9054 PISTON & ROD GP
PISTON & ROD GP
2W-9054 PISTON & ROD GP
PISTON & ROD GP
2W-9054 PISTON & ROD GP
PISTON GP
2W-9053 PISTON GP
RING GP-PISTON
1W-8922 RING GP-PISTON
RING GP-PISTON
2W-1184 RING GP-PISTON
RING GP-PISTON
8N-0822 RING GP-PISTON
 

#SEBP15180260
 

2W-9054: PISTON & ROD GP

2W-9054 PISTON & ROD GP
S/N 67U15105-UP
15.6:1 RATIO
Type 1
FOR USE WITH @@@@@442-5359@@@@@
i00107877 SEBP1518
2W9054 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-1608 [1] PIN-PISTON  
2. 7E-5665 CN [2] RETAINER-PIN  
3. 160-8178 C [1] ROD AS-CONNECTING  
3A. 4P-8495 N [1] BUSHING  
3B. 8L-3441 [2] NUT (9/16-18-THD)  
3C. 6N-8942 [2] BOLT-CONNECTING ROD  
4. 328-5574 CH [1] BEARING-CONNECTING ROD (STANDARD)  
  4W-5702 ABJ BEARING-CONNECTING ROD (0.635-MM US)  
  4W-5703 ABL BEARING-CONNECTING ROD (1.27-MM US)  
5. 9Y-7212 N [1] BODY AS-PISTON  
6. 134-3761 CN [1] RING-PISTON (TOP)  
7. 2P-2817 CN [1] RING-PISTON (INTERMEDIATE)  
8. 7N-7078 CN [1] RING-PISTON (OIL CONTROL)  
   
    AVAILABLE REPAIR KIT(S):
  9Y-6188 ABHPS [1] KIT-ROD BEARING (STANDARD)  
  9Y-6189 ABJPS [1] KIT-ROD BEARING (0.635-MM US)  
  9Y-6190 ABLPS [1] KIT-ROD BEARING (1.27-MM US)  
  442-5359 ABN [1] KIT-CYLINDER PACK  
    (INCLUDES RINGS, BUSHING, PISTON BODY ASSEMBLY, RETAINER, LINER, SINGLE CYLINDER LINER GASKET KIT)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  H   KIT MARKED H INCLUDES SIX OF PART MARKED H
  J   KIT MARKED J INCLUDES SIX OF PART MARKED J
  L   KIT MARKED L INCLUDES SIX OF PART MARKED L
  N   KIT MARKED N SERVICES PART(S) MARKED N
  P   QTY OF 2 KITS REQUIRED FOR 3412 ENGINE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  S   NOT FOR USE WITH 3408 ENGINE
 

#SEBP15180261
 

2W-9054: PISTON & ROD GP

2W-9054 PISTON & ROD GP
S/N 67U15105-UP
15.6:1 RATIO
Type 2
FOR USE WITH @@@@@442-5359@@@@@
i04156512 SEBP1518
2W9054 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 524-5564 [1] PIN-PISTON  
2. 7E-5665 N [2] RETAINER-PIN  
3. 160-8178 [1] ROD AS-CONNECTING  
3A. 4P-8495 N [1] BUSHING  
3B. 8L-3441 [2] NUT (9/16-18-THD)  
3C. 6N-8942 [2] BOLT-CONNECTING ROD  
4. 328-5574 H [1] BEARING-CONNECTING ROD (STANDARD)  
  4W-5702 ABJ BEARING-CONNECTING ROD (0.635-MM US)  
  4W-5703 ABL BEARING-CONNECTING ROD (1.27-MM US)  
5. 9Y-7212 N [1] BODY AS-PISTON  
6. 346-3340 CN [1] RING-PISTON (TOP)  
7. 2P-2817 N [1] RING-PISTON (INTERMEDIATE)  
8. 7N-7078 N [1] RING-PISTON (OIL CONTROL)  
   
    AVAILABLE REPAIR KIT(S):
  9Y-6188 ABHPS [1] KIT-ROD BEARING (STANDARD)  
  9Y-6189 ABJPS [1] KIT-ROD BEARING (0.635-MM US)  
  9Y-6190 ABLPS [1] KIT-ROD BEARING (1.27-MM US)  
  442-5359 ABN [1] KIT-CYLINDER PACK  
    (INCLUDES RINGS, BUSHING, PISTON BODY ASSEMBLY, RETAINER, LINER, SINGLE CYLINDER LINER GASKET KIT)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  H   KIT MARKED H INCLUDES SIX OF PART MARKED H
  J   KIT MARKED J INCLUDES SIX OF PART MARKED J
  L   KIT MARKED L INCLUDES SIX OF PART MARKED L
  N   KIT MARKED N SERVICES PART(S) MARKED N
  P   QTY OF 2 KITS REQUIRED FOR 3412 ENGINE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  S   NOT FOR USE WITH 3408 ENGINE
 

#SEBP15180262
 

2W-9053: PISTON GP

2W-9053 PISTON GP
S/N 67U11092-15104
PART OF 2W-9054 PISTON & ROD GP
FOR USE WITH @@@@@442-5359@@@@@
i00107875 SEBP1518
2W9053 PISTON GP Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-0865 [1] PISTON AS  
    -OR-
  9Y-7212 J [1] BODY AS-PISTON  
2. 1W-9460 [1] RING-PISTON (TOP)  
3. 2P-2817 [1] RING-PISTON (INTERMEDIATE)  
4. 7N-7078 [1] RING-PISTON (OIL CONTROL)  
  1W-8922 FA [1] RING GP-PISTON (STANDARD)  
    (CONSISTS OF A COMPLETE SET OF RINGS FOR ONE PISTON)
   
    AVAILABLE REPAIR KIT(S):
  442-5359 ABJ [1] KIT-CYLINDER PACK  
    (INCLUDES RINGS, BUSHING, PISTON BODY ASSEMBLY, RETAINER, LINER, SINGLE CYLINDER LINER GASKET KIT)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  F   NOT SHOWN
  J   KIT MARKED J SERVICES PART(S) MARKED J
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP15180263
 

274-0000: PLUG GP-CYLINDER HEAD

274-0000 PLUG GP-CYLINDER HEAD
S/N 67U21515-UP
i02430508 SEBP1518
2740000 PLUG GP-CYLINDER HEAD Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-6762 [6] PLUG-PIPE (1/2-14-THD)  
2. 7X-7731 [2] PLUG-PIPE (3/4-14-THD)  
3. 5P-0063 [4] PLUG-CUP  
4. 4N-0932 [1] PLUG-CUP  
5. 8T-6764 [2] PLUG-PIPE (1/8-27-THD)  
 

#SEBP15180264
 

274-0001: PLUG GP-CYLINDER HEAD

274-0001 PLUG GP-CYLINDER HEAD
S/N 67U21522-UP
i02425679 SEBP1518
2740001 PLUG GP-CYLINDER HEAD Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-6762 [6] PLUG-PIPE (1/2-14-THD)  
2. 7X-7731 [2] PLUG-PIPE (3/4-14-THD)  
3. 5P-0063 [2] PLUG-CUP  
4. 4N-0932 [2] PLUG-CUP  
5. 8T-6764 [2] PLUG-PIPE (1/8-27-THD)  
 

#SEBP15180265
 

7W-8620: PLUG GP-ENGINE

7W-8620 PLUG GP-ENGINE
AN ATTACHMENT
i00416785 SEBP1518
7W8620 PLUG GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2N-8109 [1] CLAMP  
2. 4F-7390 [1] SEAL-O-RING  
3. [1] CUP  
 

#SEBP15180266
 

112-1718: POWER TAKE-OFF GP

112-1718 POWER TAKE-OFF GP
REQUIRES SAE # 0 FLYWHEEL
FOR USE WITH REAR SUPPORT
CANNOT BE USED WITH SIDE LOADED APPLICATIONS
AN ATTACHMENT
i00487332 SEBP1518
1121718 POWER TAKE-OFF GP Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-3068 Y [1] CLUTCH GP  
2. 0V-0459 [12] BOLT (5/8-18X4-IN)  
3. 0S-1585 [16] BOLT (1/2-13X1.5-IN)  
4. 0S-1589 [6] BOLT (5/8-11X1.75-IN)  
5. 8L-5190 [1] KEY-SQUARE  
6. 5P-8247 [18] WASHER-HARD (17X32X3.5-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP15180267
 

1W-8857: POWER TAKE-OFF GP

1W-8857 POWER TAKE-OFF GP
CLUTCH
AN ATTACHMENT
i00354124 SEBP1518
1W8857 POWER TAKE-OFF GP Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7B-3235 [8] BOLT (1/2-13X1.375-IN)  
2. 3H-5368 [12] BOLT (7/16-14X1.375-IN)  
3. 2F-7771 [1] KEY-SQUARE  
4. 5P-3499 [1] BALL BEARING  
5. 1W-8856 Y [1] CLUTCH GP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP15180268
 

2W-4903: POWER TAKE-OFF GP

2W-4903 POWER TAKE-OFF GP
CANNOT BE USED WITH REAR STUB SHAFT
AN ATTACHMENT
i00359264 SEBP1518
2W4903 POWER TAKE-OFF GP Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7B-3235 [8] BOLT (1/2-13X1.375-IN)  
2. 6V-0455 [1] BALL BEARING  
3. 7F-8896 [1] KEY-SQUARE  
4. 2W-4902 Y [1] CLUTCH GP  
5. 3H-5368 [12] BOLT (7/16-14X1.375-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP15180269
 

2W-4909: POWER TAKE-OFF GP

2W-4909 POWER TAKE-OFF GP
CLUTCH
CANNOT BE USED WITH REAR STUB SHAFT
AN ATTACHMENT
i00359289 SEBP1518
2W4909 POWER TAKE-OFF GP Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7B-3235 [8] BOLT (1/2-13X1.375-IN)  
2. 7X-0308 [12] BOLT (7/16-14X1.375-IN)  
3. 2W-4908 Y [1] CLUTCH GP  
4. 2F-7771 [1] KEY-SQUARE  
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Wider Connecting Rods Have More Bearing Area
1979/10/31
Connecting Rod Changes And Replacement Information
1980/03/12
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Reference List Of Pistons Used With The Different Types Of Connecting Rods
1980/09/10
New Connecting Rod And Main Bearings Have A Thicker Coating (Layer) Of Lead-Tin Overlay
1981/01/21
Later Pistons Have A Smaller Number Of Drain Holes In Oil Ring Groove
1981/03/04
6V3197 Spacer, 6V3041 Tool Group Available For Use During Removal And Installation Of Piston Pin Bearings
1981/04/22
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods
1981/07/15
New Piston Pin Retainer Used
1982/02/10
Carbon Build-Up In Combustion And Inlet Areas
1982/04/07
Use Correct Part Numbers For Main And Connecting Rod Bearings
1982/05/12
Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/11/10
New Piston Group Has A Thicker Top Ring
1982/12/15
Pistons With Thicker Top Rings Must Be Used In Correct Applications
1983/04/27
Parts Service Information For Pistons, Connecting Rods, Piston Pins And Rings
1983/09/14
New Connecting Rod And Main Bearings Used
1983/11/30
Remanufactured Connecting Rod Assemblies
1984/02/22
Be Sure Correct Piston Rings Are Used On 3400 Series Engines
1985/05/01
Increase Piston Reuse With Keystone Piston Ring Gauge Group
1986/07/01
Check Connecting Rods After Engine Failures Involving Hydraulic Lock
1986/12/01
Main And Connecting Rod Bearing Part Numbers
1987/01/01
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method
1987/06/01
Recommendations For Reusability Of Pistons With Crater Rim Cracks
1987/07/01
3400 Engine Major Component Performance Guide Available
1987/07/01
Testing Connecting Rod Eye Bushings When Overhauling Engines
1987/07/01
New Connecting Rod Bearing Used
1989/09/01
Plasma Top Piston Rings Replace Chrome Rings
1989/09/01
Service Tips For Piston Cooling Jets (Tubes)
1990/12/01
New Piston Pin Retainer Used
1991/10/01
Connecting Rod Bearing Eliminates The Need For Mid-Life Connecting Rod Bearing Roll-In
1992/08/01
Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/11/01
Be Sure Correct Piston Cooling Jets Are Installed{1331}
1994/12/01
Improved Main And Connecting Rod Bearings Have Aluminum Alloy With More Strength
1977/01/28
Exhaust Manifold Coupling With A Slip Fit Now Used Instead Of A Coupling With Piston Rings
1977/02/28
Lock Now Available For Connecting Rod Bolt Used In TU-FL0501 Air Compressor
1977/03/15
New Oversize Connecting Rod Bearings Have Improved Design And Material
1977/04/22
New Piston Pin Bearing Used In Connecting Rod Assembly
1977/04/22
Stronger Piston Is Used; Piston And Connecting Rod Are Tapered In Area Of Piston Pin
1977/09/28
Stronger Piston And Connecting Rod Are Tapered In Area Of Piston Pin
1978/03/01
New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03
New Guidelines for Inspecting Pistons {1214}
2006/01/02
Usability of Main Bearings and Camshaft Bearings {1202, 1203, 1218, 1219}
2008/11/24
A New Connecting Rod Bearing is Available for Certain Commercial Engines {1219, 1225}
2009/01/05
A New Connecting Rod Bearing is Available {1218, 1219, 1225}
2009/02/09
An Improved Top Piston Ring Is Now Used on Aluminum Pistons in Certain 3406, 3408, and 3412 Engines {1215}
2012/04/24
Special Instruction
Use of Piston Pin Bearing Removal and Installation Tools{1218}
Use of Piston Pin Bearing Removal and Installation Tools{1218}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
3400 Series Engines{1215}
3400 Series Engines{1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Service Letter-NACD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Australia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-CFEL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-CSARL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Americas
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Brazil
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Truck/Ag/Marine
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Technical Information Bulletin
Connecting Rod Bearings
Connecting Rod Bearings
Connecting Rod Bearings
Connecting Rod Bearings
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Specifications
Connecting Rod And Main Bearing Journals
3408C & 3412C INDUSTRIAL ENGINES
Connecting Rods
3408C & 3412C INDUSTRIAL ENGINES
Pistons And Rings
3408C & 3412C INDUSTRIAL ENGINES
Connecting Rod
3408B and 3408C Industrial and Marine Engines
Piston and Rings
3408B and 3408C Industrial and Marine Engines
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Service Letter-China
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Service Letter-Asia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Information Release Memo
PRODUCT LINE ADDITIONS: REMANUFACTURED SHORT AND LONG BLOCKS FOR VARIOUS APPLICATIONS
PRODUCT LINE ADDITIONS: REMANUFACTURED SHORT AND LONG BLOCKS FOR VARIOUS APPLICATIONS
Service Letter-APD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Disassembly and Assembly
Pistons
3408C & 3412C INDUSTRIAL ENGINES
Connecting Rod Bearings
3408C & 3412C INDUSTRIAL ENGINES
Connecting Rod Bearings
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Pistons And Connecting Rods
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Service Magazine
Connecting Rod Changes And Replacement Information{1218}
1980/03/03
Reference List Of Pistons Used With The Different Types Of Connecting Rods{1214,1218}
1980/09/15
New Connecting Rod And Main Bearings Have A Thicker Coating (Layer) Of Lead-Tin Overlay{1230,1219,1203}
1981/01/19
Later Pistons Have A Smaller Number Of Drain Holes In Oil Ring Groove{1214,1213}
1981/02/23
6V3197 Spacer, 6V3041 Tool Group Available For Use During Removal and Installation Of Piston Pin Bearings{0622,1219,1218,1214}
1981/03/30
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
New Cylinder Liners And O-Ring Seals Give Longer Seal Life{1216,1201,1213,1227}
1981/12/14
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
New Piston Pin Retainer Used{1214,1225}
1982/02/08
Carbon Build-Up In Combustion And Inlet Areas{1058,1101,1105,1214,1104}
1982/03/22
Use Correct Part Numbers For Main And Connecting Rod Bearings{1230,1203,1219}
1982/04/12
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
New Piston Group Has A Thicker Top Ring{1215,1214,1213,1225,1226,1227}
1982/12/13
New Connecting Rod Bearings Used{1219,1230}
1983/04/04
Pistons With Thicker Top Rings Must Be Used In Correct Applications {1214,1215}
1983/04/18
Reuse Of Engine Bearings{1230}
1983/05/16
Parts Service Information For Pistons, Connecting Rods, Piston Pins And Rings{1214,1225,1215,1218}
1983/09/12
New Connecting Rod And Main Bearings Used{1203,1219,1226,1227,1230}
1983/10/10
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Connecting Rod Assemblies{1218}
1984/01/23
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Be Sure Correct Piston Rings Are Used On 3400 Series Engines{1215,1214}
1985/05/06
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Two Different Piston Oil Ring Designs Used{1215}
1985/11/11
Service Reminders For 3400 Family Of Diesel Engines{1204,1214,1331}
1986/05/05
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Improved Main And Connecting Rod Bearings Have Aluminum Alloy With More Strength{1230}
1977/01/17
Exhaust Manifold Coupling With A Slip Fit Now Used Instead Of A Coupling With Piston Rings{1061}
1977/01/24
Lock Now Available For Connecting Rod Bolt Used In TU-FL0501 Air Compressor{1065}
1977/02/28
New Piston Pin Bearing Used In Connecting Rod Assembly{1218}
1977/04/25
New Oversize Connecting Rod Bearings Have Improved Design And Material{1219}
1977/04/25
Stronger Piston Is Used; Piston And Connecting Rod Are Tapered In Area Of Piston Pin{1213,1214,1218}
1977/09/19
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Recommendations For Reusability Of Pistons With Crater Rim Cracks{1214}
1987/06/29
Testing Connecting Rod Eye Bushings When Overhauling Engines{1218}
1987/07/06
New Piston Cooling Jets Used {1213,1214}
1987/09/14
Stronger Piston And Connecting Rod Are Tapered In Area Of Piston Pin{1213,1214,1218}
1978/03/06
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Wider Connecting Rods Have More Bearing Area{1214,1218}
1979/11/05
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Connecting Rod Bearing Used{0372,1203,1219}
1989/08/21
Plasma Top Piston Rings Replace Chrome Rings{1215,1214}
1989/09/11
Service Tips For Piston Cooling Jets (Tubes){1331}
1990/11/26
New Piston Pin Retainer Used{1225}
1991/10/14
Connecting Rod Bearing Eliminates The Need For Mid-Life Connecting Rod Bearing Roll-In{1219,1202}
1992/08/31
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/10/31
New Guidelines for Inspecting Pistons {1214}
2006/01/02

Caterpillar Parts SIS Catalog 3408 :

PISTON & ROD GP
2W-9054 PISTON & ROD GP
4W-1783 PAN GP-OIL
PAN GP-OIL
4W-1540 PAN GP-OIL
PAN GP-OIL
4N-1733 PAN GP-OIL
PAN GP-OIL
2W-0477 PAN GP-OIL
PAN GP-OIL
136-4880 PAN GP-OIL
MOUNTING GP-ENGINE
8N-9561 MOUNTING GP-ENGINE
MOUNTING GP-ALTERNATOR
7W-0696 MOUNTING GP-ALTERNATOR
PISTON & ROD GP
2W-9054 PISTON & ROD GP
PISTON GP
2W-9053 PISTON GP
PLUG GP-CYLINDER HEAD
274-0000 PLUG GP-CYLINDER HEAD
PLUG GP-CYLINDER HEAD
274-0001 PLUG GP-CYLINDER HEAD
PLUG GP-ENGINE
7W-8620 PLUG GP-ENGINE
POWER TAKE-OFF GP
112-1718 POWER TAKE-OFF GP
POWER TAKE-OFF GP
1W-8857 POWER TAKE-OFF GP
POWER TAKE-OFF GP
2W-4903 POWER TAKE-OFF GP

Truck sale:

Caterpillar 3408 IND, Construction
45,000 
Caterpillar 3408 IND, Construction
- Industrial engines
LOUISIANA CAT POWER SYSTEMS
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.