AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4W-9142 TURBOCHARGER GP S/N 67U11135-UP 3408 ENGINE - MACHINE


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP

ENGINE - MACHINE 3408 ENGINE - MACHINE 67U
 3408B Industrial Engine 67U11092-UP SEBP1518 3408 67U   (2018)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
TURBOCHARGER GP
4W-8053 TURBOCHARGER GP
TURBOCHARGER GP
4W-8053 TURBOCHARGER GP
TURBOCHARGER GP
4W-9142 TURBOCHARGER GP
TURBOCHARGER GP
6N-2948 TURBOCHARGER GP
TURBOCHARGER GP
6N-2951 TURBOCHARGER GP
TURBOCHARGER GP
6N-3298 TURBOCHARGER GP
 

#SEBP15180780
 

4W-9142: TURBOCHARGER GP

4W-9142 TURBOCHARGER GP
S/N 67U11135-UP
i00380642 SEBP1518
4W9142 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-5580 Y [1] TURBOCHARGER GP  
2. 1S-4295 [1] GASKET (TURBOCHARGER)  
3. 2N-2766 [4] LOCKNUT (3/8-16-THD)  
4. 2N-2765 CB [4] BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN)(MOUNTING)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15180781
 

6N-2948: TURBOCHARGER GP

6N-2948 TURBOCHARGER GP -WATERCOOLED
AN ATTACHMENT
i00407237 SEBP1518
6N2948 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-3991 CY [1] TURBOCHARGER GP  
2. 2N-2766 [4] LOCKNUT (3/8-16-THD)  
3. 7M-7273 [1] GASKET  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15180782
 

6N-2951: TURBOCHARGER GP

6N-2951 TURBOCHARGER GP -WATERCOOLED
AN ATTACHMENT
i00702262 SEBP1518
6N2951 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-6127 Y [1] TURBOCHARGER GP  
2. 2N-2766 [4] LOCKNUT (3/8-16-THD)  
3. 7M-7273 [1] GASKET  
  Y   SEPARATE ILLUSTRATION
 

#SEBP15180783
 

6N-3298: TURBOCHARGER GP

6N-3298 TURBOCHARGER GP
PART OF 6N-3491 TURBOCHARGER GP
AN ATTACHMENT
i00386623 SEBP1518
6N3298 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-6239 [1] CARTRIDGE GP-TURBOCHARGER  
  9L-6242 [1] WHEEL-COMPRESSOR  
2. 3S-4484 J [1] LOCKNUT-TURBOCHARGER (5/16-24-THD)  
3. 3S-5135 J [1] SEAL-O-RING  
4. 3S-4489 [1] SEAL-O-RING  
5. 8S-5169 [1] PLATE AS-THRUST  
6. 9L-6243 [1] HOUSING AS  
  4M-6646 [2] PIN-GROOVED  
7. 7N-3760 C [1] SHROUD  
8. 9L-6244 [1] WHEEL AS  
9. 7N-3759 CJ [1] RING-PISTON  
10. 9N-2041 CJ [1] KIT-BEARING (INCLUDES 2)  
11. 9M-8915 [3] RING-RETAINING  
12. 8S-8043 J [1] SPACER-THRUST  
13. 9M-8919 J [3] RING-SEAL  
14. 9M-8917 [1] BEARING  
15. 8S-8042 [1] COLLAR-THRUST  
16. 3S-4488 J [3] SCREW-MACHINE  
  3S-4487 J [3] PLATE-LOCK  
19. 9L-6240 [1] HOUSING-COMPRESSOR  
20. 9N-6605 [1] HOUSING  
21. 3S-5126 [6] BOLT-HIGH TEMPERATURE (3/8-16X0.625-IN)  
  3S-5127 [3] PLATE-CLAMP  
  3S-5128 [3] PLATE-LOCK  
22. 3S-5129 [1] CLAMP AS (COMPRESSOR)  
   
    AVAILABLE REPAIR KIT(S):
  6N-7239 J [1] KIT-CARTRIDGE (TURBOCHARGER)  
    (KIT MARKED J INCLUDES PARTS MARKED J)
  C   CHANGE FROM PREVIOUS TYPE
  J   (null)
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP15180784
 

6N-3491: TURBOCHARGER GP

6N-3491 TURBOCHARGER GP
AN ATTACHMENT
i00717505 SEBP1518
6N3491 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-3298 Y [1] TURBOCHARGER GP  
2. 2N-2766 [4] LOCKNUT (3/8-16-THD)  
3. 1S-4295 [1] GASKET (TURBOCHARGER)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP15180785
 

6N-4872: TURBOCHARGER GP

6N-4872 TURBOCHARGER GP
AN ATTACHMENT
i00387185 SEBP1518
6N4872 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-3989 CY [1] TURBOCHARGER GP  
2. 1S-4295 [1] GASKET (TURBOCHARGER)  
3. 2N-2766 [4] LOCKNUT (3/8-16-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15180786
 

6N-6126: TURBOCHARGER GP

6N-6126 TURBOCHARGER GP -WATERCOOLED
PART OF 6N-6310 TURBOCHARGER GP
AN ATTACHMENT
i00388111 SEBP1518
6N6126 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-9910 C [1] HOUSING AS-TURBINE  
2. 4N-0932 [7] PLUG-CUP  
3. 9N-2038 [1] CLAMP AS-TURBINE  
4. 9N-2031 [1] CARTRIDGE GP-TURBOCHARGER  
  9N-2035 [1] HOUSING AS-CENTER  
  4M-6646 [2] PIN-GROOVED  
6. 1S-1770 [1] LOCKNUT-TURBOCHARGER  
7. 9N-2040 [1] WHEEL-COMPRESSOR  
8. 9N-2046 [1] SPACER-THRUST  
9. 9M-8919 [2] RING-SEAL  
10. 9M-8911 [1] COLLAR-THRUST  
11. 0S-1616 [4] BOLT (1/4-20X1-IN)  
  9N-2036 [4] PLATE-LOCK  
12. 9N-2045 [1] PLATE AS-BACKING  
13. 1P-1120 [1] RING-SEAL  
14. 6N-5004 [1] BEARING-THRUST  
15. 9M-8915 [3] RING-RETAINING  
16. 9N-2041 [1] KIT-BEARING  
17. 9N-3701 [1] SHROUD  
18. 7N-3759 [1] RING-PISTON  
19. 9N-2043 [1] WHEEL & SHAFT AS  
21. 9N-2039 [1] CLAMP AS (COMPRESSOR)  
22. 9N-2042 [1] HOUSING-COMPRESSOR  
23. 1B-5174 C [4] PLUG-PIPE  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP15180787
 

6N-6127: TURBOCHARGER GP

6N-6127 TURBOCHARGER GP
PART OF 6N-2951 TURBOCHARGER GP
AN ATTACHMENT
i00712905 SEBP1518
6N6127 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-9905 C [1] HOUSING AS-TURBINE  
2. 4N-0932 C [1] PLUG-CUP  
3. 1B-5174 [4] PLUG-PIPE  
4. 9N-2038 [1] CLAMP AS-TURBINE  
5. 6N-4650 [1] CARTRIDGE GP-TURBOCHARGER  
  9N-2035 [1] HOUSING AS-CENTER  
  4M-6646 [2] PIN-GROOVED  
6. 1S-1770 [1] LOCKNUT-TURBOCHARGER  
7. 9N-2040 [1] WHEEL-COMPRESSOR  
8. 9N-2046 [1] SPACER-THRUST  
9. 9M-8919 [2] RING-SEAL  
10. 9M-8911 [1] COLLAR-THRUST  
11. 0S-1616 [4] BOLT (1/4-20X1-IN)  
  9N-2036 [4] PLATE-LOCK  
12. 9N-2045 [1] PLATE AS-BACKING  
13. 1P-1120 [1] RING-SEAL  
14. 6N-5004 [1] BEARING-THRUST  
15. 9M-8915 [3] RING-RETAINING  
16. 9N-2041 [1] KIT-BEARING  
    (INCL 2 BEARING & 2 WASHERS)
17. 9N-3701 C [1] SHROUD  
18. 7N-3759 C [1] RING-PISTON  
19. 6N-4606 [1] WHEEL & SHAFT AS  
21. 9N-2039 [1] CLAMP AS (COMPRESSOR)  
22. 9N-2042 [1] HOUSING-COMPRESSOR  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP15180788
 

6N-6131: TURBOCHARGER GP

6N-6131 TURBOCHARGER GP
WATERCOOLED
PART OF 6N-6311 TURBOCHARGER GP
AN ATTACHMENT
i01753617 SEBP1518
6N6131 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-6128 [1] COVER-COMPRESSOR  
2. 2S-1304 [1] CLAMP AS (COMPRESSOR)  
3. 6N-6130 [1] CARTRIDGE AS  
4. 5S-4517 [1] CLAMP AS (TURBINE)  
5. 7C-6705 [1] HOUSING AS (TURBINE)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP15180789
 

6N-6310: TURBOCHARGER GP

6N-6310 TURBOCHARGER GP
(WATERCOOLED)
AN ATTACHMENT
i00712906 SEBP1518
6N6310 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-6126 Y [1] TURBOCHARGER GP  
2. 2N-2766 [4] LOCKNUT (3/8-16-THD)  
3. 7M-7273 [1] GASKET  
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Engine News
New Design Exhaust Gasket Used In Air Lines Group
1979/05/09
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
New Turbocharger, Turbocharger Oil Line And Aftercooler Air Lines Group Used
1981/07/15
Stronger Turbine Wheel Used In Turbocharger Shaft And Wheel Assemblies
1982/08/25
Use Of 9S3265 Retaining Compound On AiResearch Turbocharger Compressor Wheel Retainer Nuts
1983/04/27
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Oversize Bearings For Turbocharger Center Housings Available
1987/04/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
Tightening Procedure For Turbocharger Compressor Nut
1989/09/01
"Off-Size" Bearing Kits Available
1991/10/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
New Seal Used In Air Lines Group{1058}
1994/03/01
Adapter For Disassembly And Assembly Of Turbocharger Cartridge
1977/01/28
Clip Now Used To Hold Coolant Line For The Turbocharger
1977/03/15
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
New Vent Tube For Water Cooled Turbocharger
1978/08/30
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/01
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
Packaging the Turbocharger {1052}
2007/02/26
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 9Y1669 Turbo Kit{1052}
Installation of 9Y1669 Turbo Kit{1052}
2W719 Turbocharger Cartridge Repair Kit{1053}
2W719 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W726 Turbocharger Cartridge Repair Kit{1053}
2W727 Turbocharger Cartridge Repair Kit{1053}
2W727 Turbocharger Cartridge Repair Kit{1053}
2W715 Turbocharger Cartridge Repair Kit{1053}
2W715 Turbocharger Cartridge Repair Kit{1053}
7W4872 Turbocharger Cartridge Repair Kit{1053}
7W4872 Turbocharger Cartridge Repair Kit{1053}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Inlet Air And Exhaust Lines
3408C & 3412C INDUSTRIAL ENGINES
Turbocharger
3408C & 3412C INDUSTRIAL ENGINES
Turbocharger
3408B and 3408C Industrial and Marine Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Turbochargers (3408 Engine)
3408C & 3412C INDUSTRIAL ENGINES
Turbocharger (Engine With Four Turbochargers)
3408C & 3412C INDUSTRIAL ENGINES
Turbocharger (Industrial Engine)
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Turbocharger (T12)
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Turbocharger (TV72 & TW72)
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Turbocharger (TV81 & TW81)
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Turbocharger (F552)
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Turbocharger (4MF And 4MFW)
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Turbocharger (S4A)
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Turbocharger (Marine Engine)
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Service Magazine
Exhaust Manifold And Air Lines Groups Changed To Prevent Exhaust Leakage And Damage To Manifold Gaskets And Mounting Studs{1059,1061}
1980/12/01
New Turbocharger, Turbocharger Oil Line And Aftercooler Air Lines Group Used{1052}
1981/07/06
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
Exhaust Manifold And Air Lines Changes Prevent Broken Studs And Exhaust Leaks {1059,1061}
1981/09/14
Carbon Build-Up In Combustion And Inlet Areas{1058,1101,1105,1214,1104}
1982/03/22
Stronger Turbine Wheel Used In Turbocharger Shaft And Wheel Assemblies{1053,1052}
1982/06/14
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Adapter For Disassembly And Assembly Of Turbocharger Cartridge{0620,1053}
1977/01/24
Clip Now Used To Hold Coolant Line For The Turbocharger{1052,1380}
1977/02/28
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
New Vent Tube For Water Cooled Turbocharger{1380,1052}
1978/09/04
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
New Design Exhaust Gasket Used In Air Lines Group{1061}
1979/04/30
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Tightening Procedure For Turbocharger Compressor Nut{1052,1060}
1989/09/18
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket{1157,1307}
1992/09/21
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/09
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/15
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
New Gaskets for the Turbocharger Oil Lines are Now Used {1052, 1307}
2005/06/27
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 3408 :

TURBOCHARGER GP
4W-8053 TURBOCHARGER GP
TURBOCHARGER GP
4W-8053 TURBOCHARGER GP
TURBOCHARGER GP
4W-7633 TURBOCHARGER GP
TURBOCHARGER GP
4W-7482 TURBOCHARGER GP
TURBOCHARGER GP
4W-1495 TURBOCHARGER GP
TURBOCHARGER GP
4W-1434 TURBOCHARGER GP
TURBOCHARGER GP
4N-2075 TURBOCHARGER GP
TURBOCHARGER GP
1W-5580 TURBOCHARGER GP
TURBOCHARGER GP
6N-2948 TURBOCHARGER GP
TURBOCHARGER GP
6N-2951 TURBOCHARGER GP
TURBOCHARGER GP
6N-3298 TURBOCHARGER GP
TURBOCHARGER GP
6N-3491 TURBOCHARGER GP
TURBOCHARGER GP
6N-4872 TURBOCHARGER GP
TURBOCHARGER GP
6N-6126 TURBOCHARGER GP
TURBOCHARGER GP
6N-6127 TURBOCHARGER GP
TURBOCHARGER GP
6N-6131 TURBOCHARGER GP

Truck sale:

Caterpillar 3408 IND, Construction
45,000 
Caterpillar 3408 IND, Construction
- Industrial engines
LOUISIANA CAT POWER SYSTEMS
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.