AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7N-6389 PUMP GP-FUEL INJECTION PART OF 1N-3277 PUMP GP-GOV, FUEL INJ & TFR AN ATTACHMENT 3408 ENGINE - MACHINE


FUEL SYSTEM
PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING
PUMP GP-FUEL TRANSFER

ENGINE - MACHINE 3408 ENGINE - MACHINE 67U
 3408B Industrial Engine 67U11092-UP SEBP1518 3408 67U   (2018)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7N-1185 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7N-1241 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7N-6389 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7W-0561 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7W-1983 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7W-1983 PUMP GP-FUEL INJECTION
 

#SEBP15180940
 

7N-6389: PUMP GP-FUEL INJECTION

7N-6389 PUMP GP-FUEL INJECTION
PART OF 1N-3277 PUMP GP-GOV, FUEL INJ & TFR
AN ATTACHMENT
i01199843 SEBP1518
7N6389 PUMP GP-FUEL INJECTION Parts scheme 7N6389 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1634 [1] COVER  
  4N-1636 [1] GASKET  
2. 0S-1615 [2] BOLT (1/4-20X0.75-IN)  
3. 9S-4191 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
4. 4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
5. 8H-9204 [8] WASHER-FELT (19/32X7/8X5/16-IN THK)  
6. 7E-5085 [8] BUSHING-TERMINAL  
7. 9S-8008 [2] PLUG (1-1/16-12-THD)  
  3D-2824 [2] SEAL-O-RING  
8. 1T-0284 [1] BOLT-SOCKET HEAD (5/16-18X1-IN)  
9. 7N-2694 [1] BRACKET AS-CONTROL  
10. [1] PIN  
11. 7N-2693 [1] SPRING-TORSION  
12. 4N-1572 [1] LINK-RACK  
13. 4N-0900 [1] RACK-REGULATOR  
  4N-0901 [1] RACK-REGULATOR  
14. 114-8718 [8] SEAL-O-RING  
15. 6N-7829 Y [8] PUMP GP-FUEL INJECTION  
16. 5M-2697 B [8] SPACER (1.026X1.285X0.17-IN THK)  
  2M-4208 B [8] SPACER (1.027X1.285X0.174-IN THK)  
  2M-4209 B [8] SPACER (1.027X1.285X0.178-IN THK)  
  2M-4210 B [8] SPACER (1.027X1.285X0.182-IN THK)  
  B [8] SPACER (0.186-IN THK)  
  2M-4212 B [8] SPACER (1.027X1.285X0.19-IN THK)  
  5M-2691 B [8] SPACER (1.027X1.285X0.194-IN THK)  
  5S-7189 B [8] SPACER (1.027X1.285X0.198-IN THK)  
17. 7N-4574 Y [1] HOUSING GP-FUEL PUMP  
18. 6N-3199 [8] LIFTER AS  
19. 9N-3847 [1] CAMSHAFT-FUEL PUMP  
20. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
21. 4N-0824 [1] VALVE AS-BYPASS (FUEL INJECTION PUMP)  
  7L-8696 [1] SPRING-BYPASS  
22. 3K-0360 [1] SEAL-O-RING  
23. 8N-0561 C [1] GEAR-PUMP IDLER (9-TEETH)  
24. 6N-7695 [1] COVER-OIL PUMP  
  6L-5897 [2] BOLT (1/4-20X0.875-IN)  
25. 6N-4165 [1] PINION AS (12-TEETH)  
26. 6N-4090 [1] DOWEL  
27. 8N-0560 C [1] GEAR-PUMP DRIVE (11-TEETH)  
28. 0S-1618 [3] BOLT (5/16-18X1-IN)  
29. 5M-6214 [1] PLUG (1/8-27 PTF)  
30. 5F-9144 [1] SEAL-O-RING  
31. 4N-0905 [1] GEAR-BEVEL (42-TEETH)  
32. 4N-0776 [1] RETAINER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15180941
 

7W-0561: PUMP GP-FUEL INJECTION

7W-0561 PUMP GP-FUEL INJECTION
PART OF 4W-0150, 4W-4737, 4W-6012, 4W-6036, 7W-1983, 7W-9445 PUMP GP-FUEL INJECTION
ALSO AN ATTACHMENT
i00108208 SEBP1518
7W0561 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-9171 [1] BONNET-VALVE  
2. 8N-1415 [1] SPRING-CHECK  
3. 1W-6987 [1] VALVE AS-CHECK (FUEL)  
4. 7W-1927 [1] RING-RETAINING  
5. 7W-0182 [1] PLUNGER & BARREL AS  
6. 7C-5278 C [1] BOLT-PLUNGER GEAR (FUEL PUMP)  
7. 7N-1066 C [1] WASHER-RETAINING  
  7N-1208 C [1] SPRING-LIFTER  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP15180942
 

7W-1983: PUMP GP-FUEL INJECTION

7W-1983 PUMP GP-FUEL INJECTION
DIRECT INJECTION
PART OF 4W-7180 PUMP GP-GOV, FUEL INJ & TFR
i00431788 SEBP1518
7W1983 PUMP GP-FUEL INJECTION Parts scheme 7W1983 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-1939 [1] CAMSHAFT-FUEL PUMP  
2. 8N-6981 [8] LIFTER AS  
3. 9S-4191 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
4. 7N-4574 Y [1] HOUSING GP-FUEL PUMP  
5. 8H-9204 [8] WASHER-FELT (19/32X7/8X5/16-IN THK)  
6. 2M-4314 [8] BUSHING-TERMINAL  
7. 9S-8008 [2] PLUG (1-1/16-12-THD)  
  3D-2824 [2] SEAL-O-RING  
8. 1T-0284 [1] BOLT-SOCKET HEAD (5/16-18X1-IN)  
9. 7N-2694 [1] BRACKET AS-CONTROL  
10. 6N-6955 [1] PIN  
11. 7N-2693 [1] SPRING-TORSION  
12. 4N-1572 [1] LINK-RACK  
13. 4N-0900 [1] RACK-REGULATOR  
  4N-0901 [1] RACK-REGULATOR  
14. 3D-2992 [8] SEAL  
15. 4W-0101 Y [8] PUMP GP-FUEL INJECTION  
16. 9N-6496 M [8] SPACER (26.08X32.64X4.115-MM THK)  
  9N-6495 [8] SPACER (26.08X32.64X4.216-MM THK)  
  5M-2697 [8] SPACER (1.026X1.285X0.17-IN THK)  
  2M-4208 [8] SPACER (1.027X1.285X0.174-IN THK)  
  2M-4209 [8] SPACER (1.027X1.285X0.178-IN THK)  
  2M-4210 [8] SPACER (1.027X1.285X0.182-IN THK)  
  2M-4211 [8] SPACER (1.027X1.285X0.186-IN THK)  
  2M-4212 [8] SPACER (1.027X1.285X0.19-IN THK)  
  5M-2691 [8] SPACER (1.027X1.285X0.194-IN THK)  
  5S-7189 [8] SPACER (1.027X1.285X0.198-IN THK)  
17. 4N-0824 [1] VALVE AS-BYPASS (FUEL INJECTION PUMP)  
  7L-8696 [1] SPRING-BYPASS  
18. 3K-0360 [1] SEAL-O-RING  
19. 8N-0561 [1] GEAR-PUMP IDLER (9-TEETH)  
20. 6N-7695 [1] COVER-OIL PUMP  
  6L-5897 [2] BOLT (1/4-20X0.875-IN)  
21. 6N-4165 [1] PINION AS (12-TEETH)  
22. 6N-4090 [1] DOWEL  
23. 8N-0560 [1] GEAR-PUMP DRIVE (11-TEETH)  
24. 0S-1618 [3] BOLT (5/16-18X1-IN)  
25. 5M-6214 [1] PLUG (1/8-27 PTF)  
26. 5F-9144 [1] SEAL-O-RING  
27. 4N-0905 [1] GEAR-BEVEL (42-TEETH)  
28. 4N-0776 [1] RETAINER  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP15180943
 

7W-1983: PUMP GP-FUEL INJECTION

7W-1983 PUMP GP-FUEL INJECTION
DIRECT INJECTION
PART OF 4W-7179, 4W-7180, 9Y-3613 PUMP GP-GOV, FUEL INJ & TFR
ALSO AN ATTACHMENT
i00147891 SEBP1518
7W1983 PUMP GP-FUEL INJECTION Parts scheme 7W1983 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3956 C [1] CAMSHAFT-FUEL PUMP  
2. 8N-6981 [8] LIFTER AS  
3. 9S-4191 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
4. 7N-4574 Y [1] HOUSING GP-FUEL PUMP  
5. 8H-9204 [8] WASHER-FELT (19/32X7/8X5/16-IN THK)  
6. 7E-5085 [8] BUSHING-TERMINAL  
7. 9S-8008 [2] PLUG (1-1/16-12-THD)  
  3D-2824 [2] SEAL-O-RING  
8. 1T-0284 [1] BOLT-SOCKET HEAD (5/16-18X1-IN)  
9. 7N-2694 [1] BRACKET AS-CONTROL  
10. 6N-6955 [1] PIN  
11. 7N-2693 [1] SPRING-TORSION  
12. 4N-1572 [1] LINK-RACK  
13. 4N-0900 [1] RACK-REGULATOR  
  4N-0901 [1] RACK-REGULATOR  
14. 114-8718 [8] SEAL-O-RING  
15. 7W-0561 YC [8] PUMP GP-FUEL INJECTION  
16. 9N-6496 BM [8] SPACER (26.08X32.64X4.115-MM THK)  
  9N-6495 B [8] SPACER (26.08X32.64X4.216-MM THK)  
  5M-2697 B [8] SPACER (1.026X1.285X0.17-IN THK)  
  2M-4208 B [8] SPACER (1.027X1.285X0.174-IN THK)  
  2M-4209 B [8] SPACER (1.027X1.285X0.178-IN THK)  
  2M-4210 B [8] SPACER (1.027X1.285X0.182-IN THK)  
  2M-4211 B [8] SPACER (1.027X1.285X0.186-IN THK)  
  2M-4212 B [8] SPACER (1.027X1.285X0.19-IN THK)  
  5M-2691 B [8] SPACER (1.027X1.285X0.194-IN THK)  
  5S-7189 B [8] SPACER (1.027X1.285X0.198-IN THK)  
17. 4N-0824 [1] VALVE AS-BYPASS (FUEL INJECTION PUMP)  
  7L-8696 [1] SPRING-BYPASS  
18. 3K-0360 [1] SEAL-O-RING  
19. 8N-0561 [1] GEAR-PUMP IDLER (9-TEETH)  
20. 6N-7695 [1] COVER-OIL PUMP  
  6L-5897 [2] BOLT (1/4-20X0.875-IN)  
21. 6N-4165 [1] PINION AS (12-TEETH)  
22. 6N-4090 [1] DOWEL  
23. 8N-0560 [1] GEAR-PUMP DRIVE (11-TEETH)  
24. 0S-1618 [3] BOLT (5/16-18X1-IN)  
25. 5M-6214 [1] PLUG (1/8-27 PTF)  
26. 5F-9144 [1] SEAL-O-RING  
27. 4N-0905 [1] GEAR-BEVEL (42-TEETH)  
28. 4N-0776 [1] RETAINER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15180944
 

7W-9445: PUMP GP-FUEL INJECTION

7W-9445 PUMP GP-FUEL INJECTION
S/N 67U11135-UP
PART OF 7W-9444 PUMP GP-GOV DRV,FUEL INJ & TFR
Type 1
AN ATTACHMENT
i00418766 SEBP1518
7W9445 PUMP GP-FUEL INJECTION Parts scheme 7W9445 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3L-5987 [1] COVER  
  8S-5388 [1] GASKET  
2. 2A-0762 [1] BOLT (1/4-20X0.625-IN)  
3. 9S-4191 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
4. 6N-2574 [1] COVER  
  4N-1636 [1] GASKET  
5. 8H-9204 [8] WASHER-FELT (19/32X7/8X5/16-IN THK)  
6. 2M-4314 [8] BUSHING-TERMINAL  
7. 9S-8008 [2] PLUG (1-1/16-12-THD)  
  3D-2824 [2] SEAL-O-RING  
8. 7N-2694 [1] BRACKET AS-CONTROL  
9. 6N-6955 [1] PIN  
10. 7N-2693 [1] SPRING-TORSION  
11. 1T-0284 [1] BOLT-SOCKET HEAD (5/16-18X1-IN)  
12. 4N-1572 [1] LINK-RACK  
13. 4N-0900 [1] RACK-REGULATOR  
  4N-0901 [1] RACK-REGULATOR  
14. 3D-2992 [8] SEAL  
15. 4W-0101 Y [8] PUMP GP-FUEL INJECTION  
16. 9N-6495 B [8] SPACER (26.08X32.64X4.216-MM THK)  
  9N-6496 BM [8] SPACER (26.08X32.64X4.115-MM THK)  
17. 4N-0779 Y [1] HOUSING GP-FUEL PUMP  
18. 8N-6981 [8] LIFTER AS  
19. 7W-1939 [1] CAMSHAFT-FUEL PUMP  
20. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
21. 6N-2837 [1] COVER  
22. 1W-1401 [1] SCREW-RACK STOP  
23. 6F-5926 [1] NUT  
  6N-2833 [1] LOCK-SETSCREW  
  1L-5316 [1] PIN-SPRING  
24. 1H-3943 [1] WASHER  
25. 5M-2697 B [8] SPACER (1.026X1.285X0.17-IN THK)  
  2M-4208 B [8] SPACER (1.027X1.285X0.174-IN THK)  
  2M-4209 B [8] SPACER (1.027X1.285X0.178-IN THK)  
  2M-4210 B [8] SPACER (1.027X1.285X0.182-IN THK)  
  2M-4211 B [8] SPACER (1.027X1.285X0.186-IN THK)  
  2M-4212 B [8] SPACER (1.027X1.285X0.19-IN THK)  
  5M-2691 B [8] SPACER (1.027X1.285X0.194-IN THK)  
  5S-7189 B [8] SPACER (1.027X1.285X0.198-IN THK)  
26. 6N-0540 [1] PLUG  
  3K-0360 [1] SEAL-O-RING  
27. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
  5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
28. 7S-5757 [1] RING-RETAINING  
29. 4N-9767 [1] ADAPTER-GOVERNOR DRIVE  
  8H-3127 [2] BOLT (1/4-20X0.75-IN)  
30. 4N-9766 [1] PINION-GOVERNOR DRIVE  
31. 6N-2834 [1] WASHER  
32. 6N-2838 [1] SHAFT  
33. 3L-6670 [1] RETAINER-DRIVE  
34. 6N-2839 [1] SHAFT  
35. 7J-9018 [2] BOLT-SOCKET HEAD (10-24X0.625-IN)  
36. 6N-2836 [1] LEVER-RACK STOP  
37. 031-0215 [1] BOLT-LOCKING (1/4-20X0.625-IN)  
38. 4N-0907 [1] LEVER-SHUTOFF  
39. 4N-0905 [1] GEAR-BEVEL (42-TEETH)  
40. 4N-0776 [1] RETAINER  
41. 0S-1618 [3] BOLT (5/16-18X1-IN)  
42. 5M-6214 [1] PLUG (1/8-27 PTF)  
43. 6N-2835 [1] LEVER-SHUTOFF  
44. 5B-7040 [1] BOLT (1/4-20X1-IN)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP15180945
 

7W-9445: PUMP GP-FUEL INJECTION

7W-9445 PUMP GP-FUEL INJECTION
S/N 67U11135-UP
PART OF 7W-9444 PUMP GP-GOV DRV,FUEL INJ & TFR
Type 2
AN ATTACHMENT
i00418773 SEBP1518
7W9445 PUMP GP-FUEL INJECTION Parts scheme 7W9445 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3L-5987 [1] COVER  
  8S-5388 [1] GASKET  
2. 2A-0762 [1] BOLT (1/4-20X0.625-IN)  
3. 9S-4191 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
4. 6N-2574 [1] COVER  
  4N-1636 [1] GASKET  
5. 8H-9204 [8] WASHER-FELT (19/32X7/8X5/16-IN THK)  
6. 7E-5085 [8] BUSHING-TERMINAL  
7. 9S-8008 [2] PLUG (1-1/16-12-THD)  
  3D-2824 [2] SEAL-O-RING  
8. 7N-2694 [1] BRACKET AS-CONTROL  
9. 6N-6955 [1] PIN  
10. 7N-2693 [1] SPRING-TORSION  
11. 1T-0284 [1] BOLT-SOCKET HEAD (5/16-18X1-IN)  
12. 4N-1572 [1] LINK-RACK  
13. 4N-0900 [1] RACK-REGULATOR  
  4N-0901 [1] RACK-REGULATOR  
14. 7E-4846 [8] SEAL-O-RING  
15. 7W-0561 CY [8] PUMP GP-FUEL INJECTION  
16. 6F-5926 [1] NUT  
  6N-2833 [1] LOCK-SETSCREW  
  1L-5316 [1] PIN-SPRING  
17. 4N-0779 Y [1] HOUSING GP-FUEL PUMP  
18. 8N-6981 [8] LIFTER AS  
19. 7W-3956 C [1] CAMSHAFT-FUEL PUMP  
20. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
21. 6N-2837 [1] COVER  
22. 1W-1401 [1] SCREW-RACK STOP  
23. 1H-3943 [1] WASHER  
24. 9N-6496 BM [8] SPACER (26.08X32.64X4.115-MM THK)  
  9N-6495 B [8] SPACER (26.08X32.64X4.216-MM THK)  
  5M-2697 B [8] SPACER (1.026X1.285X0.17-IN THK)  
  2M-4208 B [8] SPACER (1.027X1.285X0.174-IN THK)  
  2M-4209 B [8] SPACER (1.027X1.285X0.178-IN THK)  
  2M-4210 B [8] SPACER (1.027X1.285X0.182-IN THK)  
  2M-4211 B [8] SPACER (1.027X1.285X0.186-IN THK)  
  2M-4212 B [8] SPACER (1.027X1.285X0.19-IN THK)  
  5M-2691 B [8] SPACER (1.027X1.285X0.194-IN THK)  
  5S-7189 B [8] SPACER (1.027X1.285X0.198-IN THK)  
25. 6N-0540 [1] PLUG  
  3K-0360 [1] SEAL-O-RING  
26. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
  5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
27. 7S-5757 [1] RING-RETAINING  
28. 4N-9767 [1] ADAPTER-GOVERNOR DRIVE  
  8H-3127 [2] BOLT (1/4-20X0.75-IN)  
29. 4N-9766 [1] PINION-GOVERNOR DRIVE  
30. 6N-2834 [1] WASHER  
31. 6N-2838 [1] SHAFT  
32. 3L-6670 [1] RETAINER-DRIVE  
33. 6N-2839 [1] SHAFT  
34. 7J-9018 [2] BOLT-SOCKET HEAD (10-24X0.625-IN)  
35. 6N-2836 [1] LEVER-RACK STOP  
36. 031-0215 [1] BOLT-LOCKING (1/4-20X0.625-IN)  
37. 4N-0907 [1] LEVER-SHUTOFF  
38. 4N-0905 [1] GEAR-BEVEL (42-TEETH)  
39. 4N-0776 [1] RETAINER  
40. 0S-1618 [3] BOLT (5/16-18X1-IN)  
41. 5M-6214 [1] PLUG (1/8-27 PTF)  
42. 6N-2835 [1] LEVER-SHUTOFF  
43. 5B-7040 [1] BOLT (1/4-20X1-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15180946
 

8N-9453: PUMP GP-FUEL INJECTION

8N-9453 PUMP GP-FUEL INJECTION
PART OF 1W-2364 PUMP GP-GOV DRV,FUEL INJ & TFR
AN ATTACHMENT
i00416223 SEBP1518
8N9453 PUMP GP-FUEL INJECTION Parts scheme 8N9453 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3L-5987 [1] COVER  
  8S-5388 [1] GASKET  
2. 2A-0762 [1] BOLT (1/4-20X0.625-IN)  
3. 9S-4191 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
4. 6N-2574 [1] COVER  
  4N-1636 [1] GASKET  
5. 8H-9204 [8] WASHER-FELT (19/32X7/8X5/16-IN THK)  
6. 7E-5085 [8] BUSHING-TERMINAL  
7. 9S-8008 [2] PLUG (1-1/16-12-THD)  
  3D-2824 [2] SEAL-O-RING  
8. 7N-2694 [1] BRACKET AS-CONTROL  
9. [1] PIN  
10. 7N-2693 [1] SPRING-TORSION  
11. 1T-0284 [1] BOLT-SOCKET HEAD (5/16-18X1-IN)  
12. 4N-1572 [1] LINK-RACK  
13. 4N-0900 [1] RACK-REGULATOR  
  4N-0901 [1] RACK-REGULATOR  
14. 1M-1077 [8] SEAL-O-RING (26.64MM ID)  
15. 6N-7829 Y [8] PUMP GP-FUEL INJECTION  
16. 5M-2697 B [8] SPACER (1.026X1.285X0.17-IN THK)  
  2M-4208 B [8] SPACER (1.027X1.285X0.174-IN THK)  
  2M-4209 B [8] SPACER (1.027X1.285X0.178-IN THK)  
  2M-4210 B [8] SPACER (1.027X1.285X0.182-IN THK)  
  2M-4211 B [8] SPACER (1.027X1.285X0.186-IN THK)  
  2M-4212 B [8] SPACER (1.027X1.285X0.19-IN THK)  
  5M-2691 B [8] SPACER (1.027X1.285X0.194-IN THK)  
  5S-7189 B [8] SPACER (1.027X1.285X0.198-IN THK)  
17. 4N-0779 Y [1] HOUSING GP-FUEL PUMP  
18. 8N-6981 [8] LIFTER AS  
19. 4W-8140 [1] CAMSHAFT-FUEL PUMP  
20. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
21. 6N-2837 [1] COVER  
22. 1W-1401 [1] SCREW-RACK STOP  
23. 6F-5926 [1] NUT  
  6N-2833 [1] LOCK-SETSCREW  
  1L-5316 [1] PIN-SPRING  
24. 1H-3943 [1] WASHER  
25. 9N-6495 [8] SPACER (26.08X32.64X4.216-MM THK)  
  9N-6496 M [8] SPACER (26.08X32.64X4.115-MM THK)  
26. 6N-0540 [1] PLUG  
  3K-0360 [1] SEAL-O-RING  
27. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
  5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
28. 7S-5757 [1] RING-RETAINING  
29. 4N-9767 [1] ADAPTER-GOVERNOR DRIVE  
  8H-3127 [2] BOLT (1/4-20X0.75-IN)  
30. 4N-9766 [1] PINION-GOVERNOR DRIVE  
31. 6N-2834 [1] WASHER  
32. 6N-2838 [1] SHAFT  
33. 6N-6926 [1] SPRING  
34. 6N-2839 [1] SHAFT  
35. 7J-9018 [2] BOLT-SOCKET HEAD (10-24X0.625-IN)  
36. 6N-2836 [1] LEVER-RACK STOP  
37. 031-0215 [1] BOLT-LOCKING (1/4-20X0.625-IN)  
38. 4N-0907 [1] LEVER-SHUTOFF  
39. 4N-0905 [1] GEAR-BEVEL (42-TEETH)  
40. 4N-0776 [1] RETAINER  
41. 0S-1618 [3] BOLT (5/16-18X1-IN)  
42. 5M-6214 [1] PLUG (1/8-27 PTF)  
43. 6N-2835 [1] LEVER-SHUTOFF  
44. 0S-1616 [1] BOLT (1/4-20X1-IN)  
  B   USE AS REQUIRED
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15180947
 

145-8855: PUMP GP-FUEL PRIMING

145-8855 PUMP GP-FUEL PRIMING
S/N 67U17798-UP
i00658601 SEBP1518
1458855 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
2. 137-5541 [1] PUMP GP-FUEL PRIMING  
3. 1B-2790 [1] BOLT (5/16-18X1.375-IN)  
4. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
5. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
6. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
 

#SEBP15180948
 

4N-3287: PUMP GP-FUEL PRIMING

4N-3287 PUMP GP-FUEL PRIMING
S/N 67U11092-17797; 67U18994-UP
FOR USE WITH @@@@@ 4N-1981@@@@@
i00107921 SEBP1518
4N3287 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
2. 1B-2790 [1] BOLT (5/16-18X1.375-IN)  
3. 7X-2501 [1] BOLT (1/4-20X1.25-IN)  
4. 105-2508 [1] PUMP AS-FUEL PRIMING  
5. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
6. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
 

#SEBP15180949
 

4N-1101: PUMP GP-FUEL TRANSFER

4N-1101 PUMP GP-FUEL TRANSFER
PART OF 1W-2364, 4W-4740, 4W-6037, 7W-9444 PUMP GP-GOV DRV,FUEL INJ & TFR, 1N-3277, 4W-4738, 4W-6014, 4W-7179, 4W-7180, 7N-1242, 7W-2207, 8N-6117, 9Y-3613 PUMP GP-GOV, FUEL INJ & TFR
ALSO AN ATTACHMENT
i00107907 SEBP1518
4N1101 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-6213 [1] PLUG-PIPE (1/4-18-THD)  
2. 4N-1105 [1] GASKET  
3. 5M-6214 [2] PLUG (1/8-27 PTF)  
4. 4W-5477 CY [1] PUMP GP-FUEL TRANSFER  
5. 0S-1617 [2] BOLT (5/16-18X0.75-IN)  
6. 4N-7437 [1] PLUG  
  7J-0204 [1] SEAL-O-RING  
7. 4N-1091 [1] HOUSING AS  
8. 2D-8576 [1] BEARING-FLANGE  
9. 4N-1098 [1] SHAFT AS  
10. 4N-1102 [1] GEAR-TRANSFER PUMP DRIVE (11-TEETH)  
11. 9S-9332 [1] FITTING-ELBOW  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
New Fuel Injection Lines Groups Use A Different Fuel Injection Nozzle Assembly
1979/03/07
New Woodward Governor Control Used On Diesel Engines; Former Control Now Used On Gas Engines Only
1979/04/04
Conversion Group Available To Install Woodward Governor On Engines Equipped With Mechanical Governor
1979/04/25
Use New Adapter To Make Tests Of 9L6884 Nozzles
1979/05/09
To Prevent A Possible Change In The Fuel Rack Setting, A Specific Assembly Procedure Must Be Used To Tighten The Bolt On The Governor Stop Collar
1979/08/08
Identification Of Fuel Injection Lines And Nozzle Bodies For Different Combustion Systems
1980/02/27
Improvements To Optional Modification Of 5P4150 Nozzle Tester
1981/08/26
Explanation Of Differences In Timing Advance Information
1981/08/26
Part Number For Fuel Injection Pump Group In New Location
1981/11/25
New Fuel Nozzle Adapter Assembly Used
1982/02/24
New Idler Shaft Used In Fuel Transfer Pumps
1982/02/24
Fuel Rack Slots Have Improved Wear Resistance
1982/05/12
Changes In Engine RPM; Governor Does Not Operate Correctly
1982/10/20
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
Changes In Engine RPM; Governor Does Not Operate Correctly
1983/01/19
New Fuel Nozzle Adapters Used
1983/05/25
New Specification For Clearance Between Fuel Rack Slot And Cross Link
1983/05/25
Improved Governor Control Shaft And Seal Will Help Prevent Oil Leakage
1983/07/06
Service Information For Woodward Governors
1983/10/26
New Valve Lifter Assemblies Used In Valve Mechanism Groups
1983/11/30
Procedure To Remove Sharp Edges From Fuel Racks
1984/02/22
New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position
1984/03/07
New Seal For Fuel Injection Pump Housing Is More Resistant To Heat Damage
1984/05/16
Fill Oil Sump Before Installing Woodward Governor
1985/01/16
Cross Link Between Fuel Racks Has Smoother Surface
1985/03/01
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
New Conversion Groups Available To Convert From Hydramechanical Governors To Woodward PSG Governors
1986/05/01
More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed
1986/10/01
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters
1987/10/01
Improved Valve Mechanism Cover Groups
1988/01/01
New Fuel Shutoff Solenoid Assembly Used
1988/11/01
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles
1989/03/01
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque
1989/09/01
New Throttle Shaft Bearing Sleeves Used In Governor Housing Assembly
1990/08/01
Governor Control Motor Polarity May Require A Change
1990/11/01
Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups
1991/05/01
Corrections For Systems Operation, Troubleshooting, And Specifications For 2301 Electric Governors For Generator Set And Industrial Engines, SENR2928-01
1991/05/01
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN)
1992/04/01
New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups
1993/05/01
New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups
1993/12/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/01
Procedure To Increase Fuel Transfer Pump Pressure {1256}
1995/04/01
Pressure Compensated Simple Governor (PSG Governor) Changes From Aluminum To Cast Iron Housing {1264}
1995/04/01
Fuel Injection Pump Barrel Sealing Face Reconditioning{1251}
1996/03/19
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
Improved Governor Servo Components Available For Use With Energize To Run Solenoids; Energize To Run Solenoid Stop Bolt Adjustment Procedure{1264,1259}
1996/06/12
Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/23
New 5P4185 Fuel Pump Timing Pin To Be Used Only On 3408 And 3412 Engines
1977/05/13
Improvements To Fuel Injection Pump And Governor
1977/06/08
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Fuel Transfer Pump Shaft With Chromium Plate
1977/10/12
New Governor Spring Changes Speed Regulation
1977/11/09
Change In Design Of Engine Governor, Fuel Injection And Transfer Pump Groups, And Fuel Ratio Control Groups
1978/02/08
O-Ring Seals Of A Different Material Are Now Used On The Outside Diameter Of The Servo Cylinder In Governors
1978/05/03
A One-Piece Spring Seat Is Now Used In The Governor
1978/07/05
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned
1978/08/16
Different O-Ring Seals Now Used In Fuel Injection Pump Group
1978/08/30
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Improved Manufacturing Processes Are Used for Remanufactured Fuel Injector Nozzles That Are Used in Certain Commercial Engines {1251, 1290}
2012/07/06
Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain Commercial Engines {1250, 1251, 1290, 1713}
2013/10/17
Special Instruction
Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}
Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Use Of 6V-4180 Timing Fixture Group To Check Off-Engine Timing Dimension Setting{1251, 0653}
Use Of 6V-4180 Timing Fixture Group To Check Off-Engine Timing Dimension Setting{1251, 0653}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Installation Of 6N6193 Governor Adapter Plate Service Group{1264}
Installation Of 6N6193 Governor Adapter Plate Service Group{1264}
Installation Of 4N779 And 7N6124 Fuel Injection Pump Housing Assemblies Or Fuel Injection Pump Groups{1251, 1253}
Installation Of 4N779 And 7N6124 Fuel Injection Pump Housing Assemblies Or Fuel Injection Pump Groups{1251, 1253}
Governor Linkage Adjustments{1264, 1289}
Governor Linkage Adjustments{1264, 1289}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N3104 Governor Conversion Group (Woodward PSG){1250}
Installation Of 8N3104 Governor Conversion Group (Woodward PSG){1250}
Installation Of 8N618, 8N619, 8N620 And 8N621 Ether Starting Aid Groups{1456}
Installation Of 8N618, 8N619, 8N620 And 8N621 Ether Starting Aid Groups{1456}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Installation of 5N5930 Fuel Injection Lines Group And 2W1788 Fuel Lines Drain Group{1250, 1252}
Installation of 5N5930 Fuel Injection Lines Group And 2W1788 Fuel Lines Drain Group{1250, 1252}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles{1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Service Letter-NACD
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
Product Support Program For Installing New Fuel Injection Line Groups On Certain 3408 Generator Set, Industrial, And Marine Engines
Product Support Program For Installing New Fuel Injection Line Groups On Certain 3408 Generator Set, Industrial, And Marine Engines
Service Letter-Australia
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
Product Support Program For Installing New Fuel Injection Line Groups On Certain 3408 Generator Set, Industrial, And Marine Engines
Product Support Program For Installing New Fuel Injection Line Groups On Certain 3408 Generator Set, Industrial, And Marine Engines
Service Letter-CFEL
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
Product Support Program For Installing New Fuel Injection Line Groups On Certain 3408 Generator Set, Industrial, And Marine Engines
Product Support Program For Installing New Fuel Injection Line Groups On Certain 3408 Generator Set, Industrial, And Marine Engines
Service Letter-CSARL
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
Product Support Program For Installing New Fuel Injection Line Groups On Certain 3408 Generator Set, Industrial, And Marine Engines
Product Support Program For Installing New Fuel Injection Line Groups On Certain 3408 Generator Set, Industrial, And Marine Engines
Service Letter-Americas
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
Product Support Program For Installing New Fuel Injection Line Groups On Certain 3408 Generator Set, Industrial, And Marine Engines
Product Support Program For Installing New Fuel Injection Line Groups On Certain 3408 Generator Set, Industrial, And Marine Engines
Service Letter-Brazil
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Fuel Injection Nozzle And Adapter
3408C & 3412C INDUSTRIAL ENGINES
Fuel Injection Pump
3408C & 3412C INDUSTRIAL ENGINES
Fuel Injection Pump Housing
3408C & 3412C INDUSTRIAL ENGINES
Governor
3408C & 3412C INDUSTRIAL ENGINES
Governor And Fuel Pump Drive<BR> (Automatic Timing Advance Unit)
3408C & 3412C INDUSTRIAL ENGINES
Fuel Transfer Pump Drive
3408C & 3412C INDUSTRIAL ENGINES
Fuel Transfer Pump
3408C & 3412C INDUSTRIAL ENGINES
Governor Control
3408C & 3412C INDUSTRIAL ENGINES
Valve Mechanism Covers
3408C & 3412C INDUSTRIAL ENGINES
Fuel Injection Nozzles and Adapters
3408B and 3408C Industrial and Marine Engines
Fuel Injection Pump
3408B and 3408C Industrial and Marine Engines
Fuel Injection Pump Housing
3408B and 3408C Industrial and Marine Engines
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Service Letter-China
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
Product Support Program For Installing New Fuel Injection Line Groups On Certain 3408 Generator Set, Industrial, And Marine Engines
Product Support Program For Installing New Fuel Injection Line Groups On Certain 3408 Generator Set, Industrial, And Marine Engines
Service Letter-Asia
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
Product Support Program For Installing New Fuel Injection Line Groups On Certain 3408 Generator Set, Industrial, And Marine Engines
Product Support Program For Installing New Fuel Injection Line Groups On Certain 3408 Generator Set, Industrial, And Marine Engines
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
Product Support Program For Installing New Fuel Injection Line Groups On Certain 3408 Generator Set, Industrial, And Marine Engines
Product Support Program For Installing New Fuel Injection Line Groups On Certain 3408 Generator Set, Industrial, And Marine Engines
Disassembly and Assembly
Rocker Shaft Assembly
3408C & 3412C INDUSTRIAL ENGINES
Governor &amp; Fuel Pump Drive
3408C & 3412C INDUSTRIAL ENGINES
Fuel Injection Nozzles & Adapters
3408C & 3412C INDUSTRIAL ENGINES
Fuel Injection Pumps
3408C & 3412C INDUSTRIAL ENGINES
Fuel Transfer Pump
3408C & 3412C INDUSTRIAL ENGINES
Governor &amp; Fuel Injection Pump Housing
3408C & 3412C INDUSTRIAL ENGINES
Fuel Shutoff Solenoid
3408C & 3412C INDUSTRIAL ENGINES
Fuel Injection Pumps
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Automatic Timing Advance
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Fuel Injection Pump Housing And Governor
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Fuel Injection Pump Housing
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Fuel Injection Valves (Precombustion Chamber)
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Fuel Injection Valves (Direct Injection)
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Fuel Injection Nozzles
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Fuel Injection Nozzles And Adapters
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Direct Injection Adapters
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Service Magazine
Identification Of Fuel Injection Lines And Nozzle Bodies For Different Combustion Systems{1252,1254}
1980/02/25
Modification Of 5P1768 Pointer Assembly Necessary For Use On Some Fuel Injection Pump Housings{1253,0653}
1980/03/31
Special Cup Plugs For Use In Oversize (Larger Than Standard Size) Bores In Valve Rocker Arm Shafts{1102}
1980/09/15
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Larger Plug Used In The Ends Of The Rocker Arm Shaft Assembly{1102}
1980/12/01
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Part Number For Fuel Injection Pump Group In New Location{1253,1286}
1981/11/09
New Fuel Nozzle Adapter Assembly Used{1106}
1982/02/15
New Idler Shaft Used In Fuel Transfer Pumps{1256}
1982/02/22
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Changes In Engine RPM; Governor Does Not Operate Correctly{1264}
1982/10/18
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter{1106}
1982/10/18
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Changes In Engine RPM; Governor Does Not Operate Correctly{1264}
1983/01/10
New Fuel Nozzle Adapters Used{1106}
1983/05/09
New Double-Wall Fuel Injection Lines Group And Fuel Drain Group Available As Attachments For Protection Against Fuel Leakage{1252,1254,7400}
1983/06/20
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Procedure To Remove Sharp Edges From Fuel Racks {1257,1253}
1984/02/06
New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position{1106,1252}
1984/02/27
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage{1264}
1984/05/14
New Seal For Fuel Injection Pump Housing Is More Resistant To Heat Damage{1253}
1984/05/14
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Extra Injection Nozzle Clamp Helps Prevent Injection Nozzle Damage{1252}
1985/07/15
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Steel Fuel Pump Lifter Used{1250,1251}
1985/09/02
Cylinder Head And Valve Rocker Arm Brackets Have Oil Supply Passages In A Different Location To Prevent Possible Oil Leakage Into Cooling System {1100,1102,1350}
1985/10/21
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups{1265,1264,1250}
1986/06/02
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
Use Insert To Repair Bearing Seat In Water Pump Housing{1361}
1977/03/07
New Retainer And Improved Housing Keep Water Pump Bearing Tight; Repair For Loosened Bearing{1361}
1977/04/11
New 5P4185 Fuel Pump Timing Pin To Be Used Only On 3408 And 3412 Engines{0650,1257}
1977/05/16
Improvements To Fuel Injection Pump And Governor{1286}
1977/06/06
Fuel Transfer Pump Shaft With Chromium Plate{1256}
1977/10/10
New Governor Spring Changes Speed Regulation{1264,1286}
1977/10/31
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28
Change In Design Of Engine Governor, Fuel Injection And Transfer Pump Groups, And Fuel Ratio Control Groups{1264,1278,1286}
1978/01/23
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
New Tachometer Drive Adapter Assembly Prevents Failure Of The Seals For the Tachometer Drive Group And Transfer Pump{7462,1256}
1978/02/27
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
A Gasket Group Is Available To Give Improved Sealing For The Oil Supply To The Rocker Arms On Early Engines{1101,1102,1221}
1978/04/03
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
O-Ring Seals Of A Different Material Are Now Used On The Outside Diameter Of The Servo Cylinder In Governors{1264}
1978/05/01
New Dashpot Spring Gives A Reduction In &quot;Overshoot&quot;{1264}
1978/06/26
A One-Piece Spring Seat Is Now Used In The Governor{1264}
1978/06/26
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned{1254,1101}
1978/08/07
Different O-Ring Seals Now Used In Fuel Injection Pump Group{1251}
1978/08/28
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Ether Starting Aid Groups Are Now Available{1456}
1979/01/22
New Fuel Injection Lines Groups Use A Different Fuel Injection Nozzle Assembly{1254}
1979/03/12
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
New Woodward Governor Control Used On Diesel Engines; Former Control Now Used On Gas Engines Only{1265}
1979/03/19
Conversion Group Available To Install Woodward Governor On Engines Equipped With Mechanical Governor{1264}
1979/04/09
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
To Prevent A Possible Change In The Fuel Rack Setting, A Specific Assembly Procedure Must Be Used To Tighten The Bolt On The Governor Stop Collar{1259,1257,1250}
1979/07/02
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
Governor Control Motor Polarity May Require A Change{1265,1408,7556}
1990/10/29
Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups{1251,1253}
1991/05/20
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups {1252}
1993/05/17
New Fuel Injection Lines, Clamps, And Brackets Used In Fuel Injection Lines Groups {1252}
1993/11/15
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Improved Fuel Pump Bonnet Seal Has Better Heat Resistance {1251}
1994/09/12
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Improved Governor Servo Components Available For Use With Energize To Run Solenoids; Energize To Run Solenoid Stop Bolt Adjustment Procedure{1264,1259}
1996/06/03
Troubleshooting Engines with New Scroll Fuel Systems (NSFS) {1254}
2006/01/02
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Caterpillar Parts SIS Catalog 3408 :

PUMP GP-FUEL INJECTION
7N-1241 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7N-1185 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
6N-7829 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4W-6036 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4W-6036 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4W-6012 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4W-6012 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
4W-4737 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7W-0561 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7W-1983 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7W-1983 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7W-9445 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7W-9445 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
8N-9453 PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING
145-8855 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
4N-3287 PUMP GP-FUEL PRIMING

Truck sale:

Caterpillar 3408 IND, Construction
45,000 
Caterpillar 3408 IND, Construction
- Industrial engines
LOUISIANA CAT POWER SYSTEMS
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.