AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4W-5477 PUMP GP-FUEL TRANSFER ONE SECTION GEAR PART OF 4N-1101 PUMP GP-FUEL TRANSFER ALSO AN ATTACHMENT 3408


FUEL SYSTEM
PUMP GP-FUEL TRANSFER
GOVERNOR GP

ENGINE - MACHINE 3408 ENGINE - MACHINE 67U
 3408B Industrial Engine 67U11092-UP SEBP1518 3408 67U   (2018)

FUEL SYSTEM

PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
4N-1101 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
4W-5477 PUMP GP-FUEL TRANSFER
PUMP GP-GOV DRV,FUEL INJ & TFR
1W-2364 PUMP GP-GOV DRV,FUEL INJ & TFR
PUMP GP-GOV DRV,FUEL INJ & TFR
1W-2364 PUMP GP-GOV DRV,FUEL INJ & TFR
PUMP GP-GOV DRV,FUEL INJ & TFR
4W-4740 PUMP GP-GOV DRV,FUEL INJ & TFR
 

#SEBP15180950
 

4W-5477: PUMP GP-FUEL TRANSFER

4W-5477 PUMP GP-FUEL TRANSFER
ONE SECTION GEAR
PART OF 4N-1101 PUMP GP-FUEL TRANSFER
ALSO AN ATTACHMENT
i00107965 SEBP1518
4W5477 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-2694 [3] BOLT (5/16-18X2-IN)  
2. 4N-1116 [1] SHAFT AS-PUMP  
3. 4N-1119 [1] GEAR-TRANSFER PUMP (10-TEETH)  
4. 6V-8977 [1] SEAL-LIP TYPE  
5. 5J-5314 [3] BOLT (5/16-18X1.5-IN)  
6. 7N-6128 [1] COVER-TRANSFER PUMP  
7. 138-8436 B GASKET-LIQUID (8-OZ CAN)  
8. 4W-5476 [1] BODY AS-TRANSFER PUMP  
9. 7S-4433 [1] FERRULE  
10. 7E-5346 [1] VALVE AS (FUEL CHECK)  
11. 8F-6058 [1] BEARING  
12. 5P-9294 [1] SEAL-LIP TYPE  
13. 4N-7357 [1] BUSHING  
14. 6V-8977 [1] SEAL-LIP TYPE  
15. 1W-6177 [1] SHAFT-IDLER  
16. 8S-1925 [1] GEAR-SHAFT DRIVE (11-TEETH)  
17. 3H-1489 [1] KEY-WOODRUFF  
18. 2F-8616 [1] NUT-SELF LOCKING (3/8-24-THD)  
19. 6J-2419 [1] SEAL-O-RING  
20. 4N-1119 [1] GEAR-TRANSFER PUMP (10-TEETH)  
21. 7S-4440 [1] BOLT  
  4N-7465 [1] GASKET  
22. 6N-1069 [1] SPRING  
23. 2W-3294 [1] PLUNGER AS-VALVE  
24. 3K-8460 [1] PLUG (1/2-20-THD)  
  1J-9671 [1] SEAL-O-RING  
25. 4B-4863 [2] WASHER (4.7X11X1.2-MM THK)  
  B   USE AS REQUIRED
 

#SEBP15180951
 

1W-2364: PUMP GP-GOV DRV,FUEL INJ & TFR

1W-2364 PUMP GP-GOV DRV,FUEL INJ & TFR
PART OF 1W-2365 CONVERSION GP-GOVERNOR
Type 1
AN ATTACHMENT
i00717501 SEBP1518
1W2364 PUMP GP-GOV DRV,FUEL INJ & TFR Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-6213 [1] PLUG-PIPE (1/4-18-THD)  
2. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
3. 1F-9303 [1] LEVER-GOVERNOR  
4. 4N-1104 [1] GASKET  
5. 2H-5330 [5] BOLT (3/8-16X2.88-IN)  
6. 2H-3738 [1] BOLT (5/16-24X1-IN)  
7. 4N-1868 [1] GASKET  
8. 1N-4932 Y [1] DRIVE GP-GOVERNOR  
9. 4N-5656 [1] COVER  
  2P-8643 [1] GASKET  
10. 0S-1617 [2] BOLT (5/16-18X0.75-IN)  
  9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
11. 8N-9453 Y [1] PUMP GP-FUEL INJECTION  
12. 0S-1594 [11] BOLT (3/8-16X1-IN)  
13. 4N-1101 Y [1] PUMP GP-FUEL TRANSFER  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15180952
 

1W-2364: PUMP GP-GOV DRV,FUEL INJ & TFR

1W-2364 PUMP GP-GOV DRV,FUEL INJ & TFR
PART OF 1W-2365 CONVERSION GP-GOVERNOR
Type 2
AN ATTACHMENT
i00355917 SEBP1518
1W2364 PUMP GP-GOV DRV,FUEL INJ & TFR Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-6213 [1] PLUG-PIPE (1/4-18-THD)  
2. 0S-1591 C [8] BOLT (3/8-16X1.5-IN)  
3. 1F-9303 [1] LEVER-GOVERNOR  
4. 4N-1104 [1] GASKET  
5. 2H-5330 C [4] BOLT (3/8-16X2.88-IN)  
6. 2H-3738 [1] BOLT (5/16-24X1-IN)  
7. 4N-1868 [1] GASKET  
8. 1N-4932 Y [1] DRIVE GP-GOVERNOR  
9. 8N-9453 Y [1] PUMP GP-FUEL INJECTION  
10. 0S-1594 C [6] BOLT (3/8-16X1-IN)  
11. 4N-1101 Y [1] PUMP GP-FUEL TRANSFER  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15180953
 

4W-4740: PUMP GP-GOV DRV,FUEL INJ & TFR

4W-4740 PUMP GP-GOV DRV,FUEL INJ & TFR
AN ATTACHMENT
i00379432 SEBP1518
4W4740 PUMP GP-GOV DRV,FUEL INJ & TFR Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5K-9235 [1] ELBOW-FLARED  
2. 2H-5330 [4] BOLT (3/8-16X2.88-IN)(7.3CM)  
3. 6N-1656 Y [1] DRIVE GP-GOVERNOR  
4. 4W-4737 Y [1] PUMP GP-FUEL INJECTION  
  4N-1868 [1] GASKET  
5. 4N-1104 [1] GASKET  
6. 0S-1594 [6] BOLT (3/8-16X1-IN)  
7. 4N-1101 Y [1] PUMP GP-FUEL TRANSFER  
8. 1F-9303 [1] LEVER-GOVERNOR  
  2H-3738 [1] BOLT (5/16-24X1-IN)  
9. 6N-2832 [1] TUBE AS  
  5K-9246 [1] CONNECTOR  
10. 0S-1591 [8] BOLT (3/8-16X1.5-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15180954
 

4W-6037: PUMP GP-GOV DRV,FUEL INJ & TFR

4W-6037 PUMP GP-GOV DRV,FUEL INJ & TFR
S/N 67U11135-UP
PART OF 7W-9502 CONVERSION GP-GOVERNOR
AN ATTACHMENT
i00379840 SEBP1518
4W6037 PUMP GP-GOV DRV,FUEL INJ & TFR Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-2832 [1] TUBE AS  
  5K-9246 [1] CONNECTOR  
2. 0S-1591 [8] BOLT (3/8-16X1.5-IN)  
3. 1F-9303 [1] LEVER-GOVERNOR  
4. 5K-9235 [1] ELBOW-FLARED  
5. 2H-5330 [4] BOLT (3/8-16X2.88-IN)  
6. 2H-3738 [1] BOLT (5/16-24X1-IN)  
7. 4N-1868 [1] GASKET  
8. 6N-1656 Y [1] DRIVE GP-GOVERNOR  
9. 4W-6036 Y [1] PUMP GP-FUEL INJECTION  
10. 4N-1104 [1] GASKET  
11. 4N-1101 Y [1] PUMP GP-FUEL TRANSFER  
12. 0S-1594 [6] BOLT (3/8-16X1-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15180955
 

7W-9444: PUMP GP-GOV DRV,FUEL INJ & TFR

7W-9444 PUMP GP-GOV DRV,FUEL INJ & TFR
S/N 67U11135-UP
PART OF 7W-9501 CONVERSION GP-GOVERNOR
AN ATTACHMENT
i00418762 SEBP1518
7W9444 PUMP GP-GOV DRV,FUEL INJ & TFR Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-2832 [1] TUBE AS  
  5K-9246 [1] CONNECTOR  
2. 0S-1591 [8] BOLT (3/8-16X1.5-IN)  
3. 1F-9303 [1] LEVER-GOVERNOR  
4. 5K-9235 [1] ELBOW-FLARED  
5. 2H-5330 [4] BOLT (3/8-16X2.88-IN)  
6. 2H-3738 [1] BOLT (5/16-24X1-IN)  
7. 4N-1868 [1] GASKET  
8. 6N-1656 Y [1] DRIVE GP-GOVERNOR  
9. 4N-1101 Y [1] PUMP GP-FUEL TRANSFER  
10. 4N-1104 [1] GASKET  
11. 7W-9445 Y [1] PUMP GP-FUEL INJECTION  
12. 0S-1594 [6] BOLT (3/8-16X1-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15180956
 

1N-3277: PUMP GP-GOV, FUEL INJ & TFR

1N-3277 PUMP GP-GOV, FUEL INJ & TFR
FOR USE WITH @@@@@ 4N-3705@@@@@, @@@@@ 8N-7192@@@@@, @@@@@ 2W-0337@@@@@
AN ATTACHMENT
i00352086 SEBP1518
1N3277 PUMP GP-GOV, FUEL INJ & TFR Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
2. 0S-1571 [4] BOLT (3/8-16X1.75-IN)  
3. 8N-1312 [1] SPRING  
4. 2P-9556 [1] WASHER (1.17X1.5X0.06-IN THK)  
  2N-0828 [2] WASHER  
5. 7N-6271 Y [1] GOVERNOR GP  
6. 4N-4267 Y [1] TORQUE CONTROL GP  
7. 0L-1143 [1] BOLT (3/8-16X2.5-IN)  
8. 053-2294 [1] BOLT-12 POINT HEAD (3/8-16X1.75-IN)  
9. 3B-1915 [4] BOLT (3/8-16X1.375-IN)  
10. 4N-1868 [1] GASKET  
11. 7N-6389 Y [1] PUMP GP-FUEL INJECTION  
12. 0S-1594 [6] BOLT (3/8-16X1-IN)  
13. 4N-1104 [1] GASKET  
14. 4N-1101 Y [1] PUMP GP-FUEL TRANSFER  
15. 5L-7812 [2] BOLT (5/16-18X0.75-IN)  
  9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
16. 4N-5656 [1] COVER  
17. 2P-8643 [1] GASKET  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15180957
 

4W-4738: PUMP GP-GOV, FUEL INJ & TFR

4W-4738 PUMP GP-GOV, FUEL INJ & TFR
S/N 67U11092-12158
i00379427 SEBP1518
4W4738 PUMP GP-GOV, FUEL INJ & TFR Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
2. 0S-1571 [4] BOLT (3/8-16X1.75-IN)  
3. 9L-6448 [1] SPRING  
4. 2P-9556 [1] WASHER (1.17X1.5X0.06-IN THK)(FLAT)  
  2N-0828 [2] WASHER (SPRING)  
5. 1N-4633 Y [1] GOVERNOR GP  
6. 4N-4267 Y [1] TORQUE CONTROL GP  
7. 0L-1143 [1] BOLT (3/8-16X2.5-IN)  
8. 053-2294 [1] BOLT-12 POINT HEAD (3/8-16X1.75-IN)  
9. 3B-1915 [4] BOLT (3/8-16X1.375-IN)  
10. 4N-1868 [1] GASKET  
11. 4W-0150 Y [1] PUMP GP-FUEL INJECTION  
12. 0S-1594 [6] BOLT (3/8-16X1-IN)  
13. 4N-1104 [1] GASKET  
14. 4N-1101 Y [1] PUMP GP-FUEL TRANSFER  
15. 5L-7812 [2] BOLT (5/16-18X0.75-IN)  
  9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
16. 4N-5656 [1] COVER  
  2P-8643 [1] GASKET  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15180958
 

4W-4738: PUMP GP-GOV, FUEL INJ & TFR

4W-4738 PUMP GP-GOV, FUEL INJ & TFR
S/N 67U12159-UP
i00379428 SEBP1518
4W4738 PUMP GP-GOV, FUEL INJ & TFR Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-3336 Y [1] FASTENER GP-FUEL INJ PUMP  
2. 4N-5656 [1] COVER  
  2P-8643 [1] GASKET  
3. 9L-6448 [1] SPRING  
4. 2P-9556 [1] WASHER (1.17X1.5X0.06-IN THK)(FLAT)  
  2N-0828 [2] WASHER (SPRING)  
5. 4W-8678 CY [1] GOVERNOR GP  
6. 4N-4267 Y [1] TORQUE CONTROL GP  
7. 5L-7812 [2] BOLT (5/16-18X0.75-IN)  
  5N-4185 [2] WASHER-SPECIAL  
8. 4N-1101 Y [1] PUMP GP-FUEL TRANSFER  
9. 4N-1104 [1] GASKET  
10. 4N-1868 [1] GASKET  
11. 4W-0150 Y [1] PUMP GP-FUEL INJECTION  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP15180959
 

4W-6014: PUMP GP-GOV, FUEL INJ & TFR

4W-6014 PUMP GP-GOV, FUEL INJ & TFR
S/N 67U19115-UP
i00379827 SEBP1518
4W6014 PUMP GP-GOV, FUEL INJ & TFR Parts scheme
  For full view, you need register

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-3336 Y [1] FASTENER GP-FUEL INJ PUMP  
2. 2P-8643 [1] GASKET  
3. 9L-6447 [1] SPRING  
4. 2P-9556 [1] WASHER (1.17X1.5X0.06-IN THK)(FLAT)  
  2N-0828 [2] WASHER (SPRING)  
5. 4W-6013 Y [1] GOVERNOR GP  
6. 4N-4267 Y [1] TORQUE CONTROL GP  
7. 4N-5656 [1] COVER  
8. 5L-7812 [2] BOLT (5/16-18X0.75-IN)  
  5N-4185 [2] WASHER-SPECIAL  
9. 4N-1101 Y [1] PUMP GP-FUEL TRANSFER  
10. 4N-1868 [1] GASKET  
11. 4W-6012 Y [1] PUMP GP-FUEL INJECTION  
12. 4N-1104 [1] GASKET  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
New Woodward Governor Control Used On Diesel Engines; Former Control Now Used On Gas Engines Only
1979/04/04
Conversion Group Available To Install Woodward Governor On Engines Equipped With Mechanical Governor
1979/04/25
To Prevent A Possible Change In The Fuel Rack Setting, A Specific Assembly Procedure Must Be Used To Tighten The Bolt On The Governor Stop Collar
1979/08/08
Explanation Of Differences In Timing Advance Information
1981/08/26
Part Number For Fuel Injection Pump Group In New Location
1981/11/25
New Idler Shaft Used In Fuel Transfer Pumps
1982/02/24
Fuel Rack Slots Have Improved Wear Resistance
1982/05/12
Changes In Engine RPM; Governor Does Not Operate Correctly
1982/10/20
Changes In Engine RPM; Governor Does Not Operate Correctly
1983/01/19
New Specification For Clearance Between Fuel Rack Slot And Cross Link
1983/05/25
Improved Governor Control Shaft And Seal Will Help Prevent Oil Leakage
1983/07/06
Service Information For Woodward Governors
1983/10/26
Procedure To Remove Sharp Edges From Fuel Racks
1984/02/22
New Seal For Fuel Injection Pump Housing Is More Resistant To Heat Damage
1984/05/16
Fill Oil Sump Before Installing Woodward Governor
1985/01/16
Cross Link Between Fuel Racks Has Smoother Surface
1985/03/01
Steel Fuel Pump Lifter Used
1985/09/01
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
New Conversion Groups Available To Convert From Hydramechanical Governors To Woodward PSG Governors
1986/05/01
More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters
1987/10/01
New Fuel Shutoff Solenoid Assembly Used
1988/11/01
New Throttle Shaft Bearing Sleeves Used In Governor Housing Assembly
1990/08/01
Governor Control Motor Polarity May Require A Change
1990/11/01
Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups
1991/05/01
Corrections For Systems Operation, Troubleshooting, And Specifications For 2301 Electric Governors For Generator Set And Industrial Engines, SENR2928-01
1991/05/01
Procedure To Increase Fuel Transfer Pump Pressure {1256}
1995/04/01
Pressure Compensated Simple Governor (PSG Governor) Changes From Aluminum To Cast Iron Housing {1264}
1995/04/01
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
Improved Governor Servo Components Available For Use With Energize To Run Solenoids; Energize To Run Solenoid Stop Bolt Adjustment Procedure{1264,1259}
1996/06/12
Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/23
New 5P4185 Fuel Pump Timing Pin To Be Used Only On 3408 And 3412 Engines
1977/05/13
Improvements To Fuel Injection Pump And Governor
1977/06/08
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Fuel Transfer Pump Shaft With Chromium Plate
1977/10/12
New Governor Spring Changes Speed Regulation
1977/11/09
Change In Design Of Engine Governor, Fuel Injection And Transfer Pump Groups, And Fuel Ratio Control Groups
1978/02/08
New Tachometer Drive Adapter Assembly Prevents Failure Of The Seals For The Tachometer Drive Group And Transfer Pump
1978/03/01
O-Ring Seals Of A Different Material Are Now Used On The Outside Diameter Of The Servo Cylinder In Governors
1978/05/03
A One-Piece Spring Seat Is Now Used In The Governor
1978/07/05
Different O-Ring Seals Now Used In Fuel Injection Pump Group
1978/08/30
Special Instruction
Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}
Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Installation Of 6N6193 Governor Adapter Plate Service Group{1264}
Installation Of 6N6193 Governor Adapter Plate Service Group{1264}
Installation Of 4N779 And 7N6124 Fuel Injection Pump Housing Assemblies Or Fuel Injection Pump Groups{1251, 1253}
Installation Of 4N779 And 7N6124 Fuel Injection Pump Housing Assemblies Or Fuel Injection Pump Groups{1251, 1253}
Governor Linkage Adjustments{1264, 1289}
Governor Linkage Adjustments{1264, 1289}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N3104 Governor Conversion Group (Woodward PSG){1250}
Installation Of 8N3104 Governor Conversion Group (Woodward PSG){1250}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Service Letter-NACD
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Fuel Injection Pump
3408C & 3412C INDUSTRIAL ENGINES
Fuel Injection Pump Housing
3408C & 3412C INDUSTRIAL ENGINES
Governor
3408C & 3412C INDUSTRIAL ENGINES
Governor And Fuel Pump Drive<BR> (Automatic Timing Advance Unit)
3408C & 3412C INDUSTRIAL ENGINES
Fuel Transfer Pump Drive
3408C & 3412C INDUSTRIAL ENGINES
Fuel Transfer Pump
3408C & 3412C INDUSTRIAL ENGINES
Governor Control
3408C & 3412C INDUSTRIAL ENGINES
Fuel Transfer Pump
3408B and 3408C Industrial and Marine Engines
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Service Letter-China
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Information Release Memo
REMANUFACTURED FUEL TRANSFER PUMPS FOR 3408, 3412, 3408B, 3412B, 3408C AND 3412C INDUSTRIAL, GENSET, MARINE AND MACHINE APPLICATIONS
REMANUFACTURED FUEL TRANSFER PUMPS FOR 3408, 3412, 3408B, 3412B, 3408C AND 3412C INDUSTRIAL, GENSET, MARINE AND MACHINE APPLICATIONS
Service Letter-APD
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
Disassembly and Assembly
Governor &amp; Fuel Pump Drive
3408C & 3412C INDUSTRIAL ENGINES
Fuel Injection Pumps
3408C & 3412C INDUSTRIAL ENGINES
Fuel Transfer Pump
3408C & 3412C INDUSTRIAL ENGINES
Governor &amp; Fuel Injection Pump Housing
3408C & 3412C INDUSTRIAL ENGINES
Fuel Shutoff Solenoid
3408C & 3412C INDUSTRIAL ENGINES
Fuel Transfer Pump
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Service Magazine
Modification Of 5P1768 Pointer Assembly Necessary For Use On Some Fuel Injection Pump Housings{1253,0653}
1980/03/31
Part Number For Fuel Injection Pump Group In New Location{1253,1286}
1981/11/09
New Idler Shaft Used In Fuel Transfer Pumps{1256}
1982/02/22
Changes In Engine RPM; Governor Does Not Operate Correctly{1264}
1982/10/18
Changes In Engine RPM; Governor Does Not Operate Correctly{1264}
1983/01/10
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Procedure To Remove Sharp Edges From Fuel Racks {1257,1253}
1984/02/06
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage{1264}
1984/05/14
New Seal For Fuel Injection Pump Housing Is More Resistant To Heat Damage{1253}
1984/05/14
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Steel Fuel Pump Lifter Used{1250,1251}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups{1265,1264,1250}
1986/06/02
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Retainer And Improved Housing Keep Water Pump Bearing Tight; Repair For Loosened Bearing{1361}
1977/04/11
New 5P4185 Fuel Pump Timing Pin To Be Used Only On 3408 And 3412 Engines{0650,1257}
1977/05/16
Improvements To Fuel Injection Pump And Governor{1286}
1977/06/06
Fuel Transfer Pump Shaft With Chromium Plate{1256}
1977/10/10
New Governor Spring Changes Speed Regulation{1264,1286}
1977/10/31
Improved Fuel Priming Pump Used{1258}
1987/04/20
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28
Change In Design Of Engine Governor, Fuel Injection And Transfer Pump Groups, And Fuel Ratio Control Groups{1264,1278,1286}
1978/01/23
New Tachometer Drive Adapter Assembly Prevents Failure Of The Seals For the Tachometer Drive Group And Transfer Pump{7462,1256}
1978/02/27
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
O-Ring Seals Of A Different Material Are Now Used On The Outside Diameter Of The Servo Cylinder In Governors{1264}
1978/05/01
New Dashpot Spring Gives A Reduction In &quot;Overshoot&quot;{1264}
1978/06/26
A One-Piece Spring Seat Is Now Used In The Governor{1264}
1978/06/26
Different O-Ring Seals Now Used In Fuel Injection Pump Group{1251}
1978/08/28
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
New Woodward Governor Control Used On Diesel Engines; Former Control Now Used On Gas Engines Only{1265}
1979/03/19
Conversion Group Available To Install Woodward Governor On Engines Equipped With Mechanical Governor{1264}
1979/04/09
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
To Prevent A Possible Change In The Fuel Rack Setting, A Specific Assembly Procedure Must Be Used To Tighten The Bolt On The Governor Stop Collar{1259,1257,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Governor Control Motor Polarity May Require A Change{1265,1408,7556}
1990/10/29
Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups{1251,1253}
1991/05/20
New Fuel Priming Pump And Improved Gasket Used{1258}
1994/08/22
Improved Fuel Pump Bonnet Seal Has Better Heat Resistance {1251}
1994/09/12
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Improved Governor Servo Components Available For Use With Energize To Run Solenoids; Energize To Run Solenoid Stop Bolt Adjustment Procedure{1264,1259}
1996/06/03

Caterpillar Parts SIS Catalog 3408 :

PUMP GP-FUEL TRANSFER
4N-1101 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL PRIMING
4N-3287 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
145-8855 PUMP GP-FUEL PRIMING
PUMP GP-FUEL INJECTION
8N-9453 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7W-9445 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7W-9445 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7W-1983 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7W-1983 PUMP GP-FUEL INJECTION
PUMP GP-GOV DRV,FUEL INJ & TFR
1W-2364 PUMP GP-GOV DRV,FUEL INJ & TFR
PUMP GP-GOV DRV,FUEL INJ & TFR
1W-2364 PUMP GP-GOV DRV,FUEL INJ & TFR
PUMP GP-GOV DRV,FUEL INJ & TFR
4W-4740 PUMP GP-GOV DRV,FUEL INJ & TFR
PUMP GP-GOV DRV,FUEL INJ & TFR
4W-6037 PUMP GP-GOV DRV,FUEL INJ & TFR
PUMP GP-GOV DRV,FUEL INJ & TFR
7W-9444 PUMP GP-GOV DRV,FUEL INJ & TFR
PUMP GP-GOV, FUEL INJ & TFR
1N-3277 PUMP GP-GOV, FUEL INJ & TFR
PUMP GP-GOV, FUEL INJ & TFR
4W-4738 PUMP GP-GOV, FUEL INJ & TFR
PUMP GP-GOV, FUEL INJ & TFR
4W-4738 PUMP GP-GOV, FUEL INJ & TFR

Truck sale:

Caterpillar 3408 IND, Construction
45,000 
Caterpillar 3408 IND, Construction
- Industrial engines
LOUISIANA CAT POWER SYSTEMS
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.