7W-7787 SHUTOFF GP-ELECTRICAL 24 VOLT FOR USE WITH 3 PERCENT HYDRAMECHANICAL GOVERNOR AN ATTACHMENT 3408

7W-7787: SHUTOFF GP-ELECTRICAL

7W-7787 SHUTOFF GP-ELECTRICAL
24 VOLT
FOR USE WITH 3 PERCENT HYDRAMECHANICAL GOVERNOR
AN ATTACHMENT

Parts for your 3408 ENGINE - MACHINE:

Pos.	Part No	Qty	Parts name
1.	173-6996	[1]	SOLENOID AS (GOVERNOR SHUT OFF)
2.	6V-8377	[2]	NUT (8-32-THD)
	9B-7233	[2]	LOCKWASHER
3.	1W-9070	[1]	DIODE AS
			(BIPOLAR VOLTAGE TRANSIENT SUPPRESSOR)
	7N-9194	[2]	RING-TERMINAL (18-GA TO 22-GA)
4.	7C-6124	[1]	WIRE AS
5.	8L-3873	[2]	GASKET
6.	9Y-1776	[1]	PLATE
7.	3B-8695	[2]	BOLT (1/4-20X3.5-IN)
8.	108-2515	[2]	COVER-TERMINAL

8N-2202: SHUTOFF GP-ELECTRICAL

SHUTOFF GP-ELECTRICAL

8N-2202 SHUTOFF GP-ELECTRICAL
12 VOLT SOLENOID
FOR USE WITH SOLID LINK RACK CONNECTION
AN ATTACHMENT

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	102-3505	[1]	SOLENOID AS (GOVERNOR SHUT OFF)
1A.	4B-2043	[2]	NUT (8-32-THD)
1B.	9B-7233	[2]	LOCKWASHER
2.	8L-3873	[1]	GASKET
3.	7N-5628	[1]	SPRING-SOLENOID
4.	5B-9079	[1]	NUT-JAM (3/8-24-THD)
5.	5P-5624 BD		WIRE (14-GA, BLACK)
6.	2L-8076	[2]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
7.	2L-8919	[4]	DISCONNECT
8.	8F-1559	[2]	INSULATOR
9.	6N-4241	[1]	SHAFT-SHUTOFF
10.	1W-9070	[1]	DIODE AS
			(FORM GMG00798 INSTALLING SOLENOID SHUTOFF GROUP)
	B		USE AS REQUIRED
	D		ORDER BY THE METER

6N-4870: SILENCER GP-AIR STARTING

SILENCER GP-AIR STARTING

6N-4870 SILENCER GP-AIR STARTING -LH
FOR USE WITH NO. 1 SAE FLYWHEEL HOUSING
AN ATTACHMENT

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1H-4725	[1]	ARRESTOR-VAPOR
2.	8F-3273	[2]	LINING
3.	2L-3658	[2]	STRAP
4.	0S-1588	[4]	BOLT (3/8-16X1.25-IN)
5.	5M-2894 C	[12]	WASHER-HARD (10.2X18.5X2.5-MM THK)
6.	1H-4768	[1]	GASKET
7.	7H-2444	[1]	SEAL-O-RING
8.	5F-6658	[1]	JAR-PRECLEANER
9.	6N-5062	[1]	TUBE AS
10.	6K-3458	[1]	ELBOW-FLARED
11.	0S-1589	[2]	BOLT (5/8-11X1.75-IN)
	4D-3704	[2]	WASHER-HARD (17X30X5-MM THK)
12.	6N-9037	[1]	BRACKET
13.	0S-1590 C	[1]	BOLT (3/8-16X2-IN)
14.	1D-4717 C	[3]	NUT (3/8-16-THD)
15.	0S-1594 C	[1]	BOLT (3/8-16X1-IN)
16.	6N-9489 C	[1]	BRACKET
17.	0S-1591 C	[2]	BOLT (3/8-16X1.5-IN)
18.	1A-2029 C	[2]	BOLT (3/8-16X1.125-IN)
19.	6N-9490 C	[1]	BRACE-SILENCER
20.	1H-0767 C	[2]	SPACER (0.406X0.75X0.813-IN THK)
21.	0L-2070 C	[1]	BOLT (3/8-16X2.25-IN)
	C		CHANGE FROM PREVIOUS TYPE

6N-5077: SILENCER GP-AIR STARTING

SILENCER GP-AIR STARTING

6N-5077 SILENCER GP-AIR STARTING
FOR USE WITH SAE NO. 0 FLYWHEEL HOUSING, LH AIR MOTOR
AN ATTACHMENT

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1H-4725	[1]	ARRESTOR-VAPOR
2.	8F-3273	[2]	LINING
3.	2L-3658	[2]	STRAP
4.	0S-1588	[4]	BOLT (3/8-16X1.25-IN)
5.	5M-2894 C	[14]	WASHER-HARD (10.2X18.5X2.5-MM THK)
6.	1H-4768	[1]	GASKET
7.	7H-2444	[1]	SEAL-O-RING
8.	5F-6658	[1]	JAR-PRECLEANER
9.	6N-5062	[1]	TUBE AS
10.	6K-3458	[1]	ELBOW-FLARED
11.	0S-1589	[2]	BOLT (5/8-11X1.75-IN)
	4D-3704	[2]	WASHER-HARD (17X30X5-MM THK)
12.	6N-9037	[1]	BRACKET
13.	0S-1590	[2]	BOLT (3/8-16X2-IN)
	1H-0767	[2]	SPACER (0.406X0.75X0.813-IN THK)
14.	1D-4717 C	[4]	NUT (3/8-16-THD)
15.	0S-1594 C	[1]	BOLT (3/8-16X1-IN)
16.	6N-9489 C	[1]	BRACKET
17.	0S-1591 C	[3]	BOLT (3/8-16X1.5-IN)
18.	1A-2029 BC	[2]	BOLT (3/8-16X1.125-IN)
19.	6N-9490 C	[1]	BRACE-SILENCER
20.	9M-4136	[1]	SPACER (0.438X0.75X0.5-IN THK)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE

8N-4083: SILENCER GP-AIR STARTING

SILENCER GP-AIR STARTING

8N-4083 SILENCER GP-AIR STARTING
FOR USE WITH LH AIR MOTOR
AN ATTACHMENT

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1H-4725	[1]	ARRESTOR-VAPOR
2.	8F-3273	[2]	LINING
3.	2L-3658	[2]	STRAP
4.	9B-7237	[4]	BOLT (3/8-16X1.25-IN)
5.	8T-4896 B	[12]	WASHER-HARD (10.2X18.5X2.5-MM THK)
6.	1H-4768	[1]	GASKET
7.	7H-2444	[1]	SEAL-O-RING
8.	5F-6658	[1]	JAR-PRECLEANER
9.	6N-5062	[1]	TUBE AS
10.	6K-3458	[1]	ELBOW-FLARED
11.	7X-0345 B	[2]	BOLT (5/8-11X1.75-IN)
12.	7X-0515 B	[2]	WASHER-HARD (17X35X5-MM THK)
13.	8T-2501	[1]	BOLT (3/8-16X2-IN)
14.	6V-8801	[3]	NUT (3/8-16-THD)
15.	4L-6454	[1]	BOLT (3/8-16X1-IN)
16.	6N-9489	[1]	BRACKET
17.	4L-9337 B	[2]	BOLT (3/8-16X1.5-IN)
18.	8T-2502 B	[2]	BOLT (3/8-16X1.125-IN)
19.	6N-9490	[1]	BRACE-SILENCER
20.	1H-0767	[2]	SPACER (0.406X0.75X0.813-IN THK)
21.	8T-9377	[1]	BOLT (3/8-16X2.25-IN)
22.	8N-4082	[1]	BRACKET-SILENCER
	B		USE AS REQUIRED

3T-3421: SOLENOID AS-STARTING MOTOR

SOLENOID AS-STARTING MOTOR

3T-3421 SOLENOID AS-STARTING MOTOR
24 VOLT
PART OF 3T-8949, 3T-8953 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	318-2082	[1]	SOLENOID AS-STARTING MOTOR (24-VOLT)
2.	4M-1815	[1]	SPRING-CONTACT
3.	4M-5274	[3]	SCREW-MACHINE (TRUSS HEAD)
4.	6T-1121	[1]	GASKET-TERMINAL PLATE
5.	045-4065	[4]	SCREW-MACHINE (10-32X0.75-IN)
	4B-4274	[8]	WASHER (5.5X13X1.2-MM THK)
	4B-2049	[4]	NUT (10-32-THD)
6.	6T-1120	[1]	BUSHING-TERMINAL
7.	6T-1119	[1]	TERMINAL AS
8.	3H-3680	[3]	NUT-JAM (1/2-13-THD)
	4B-4280	[3]	WASHER (13.5X27X2.5-MM THK)
	9F-4976	[2]	LOCKWASHER
9.	4B-2049	[3]	NUT (10-32-THD)
	4B-4274	[3]	WASHER (5.5X13X1.2-MM THK)
	3B-4502	[2]	LOCKWASHER
10.	6T-0362	[1]	INSULATOR

3T-4704: SOLENOID AS-STARTING MOTOR

SOLENOID AS-STARTING MOTOR

3T-4704 SOLENOID AS-STARTING MOTOR
24-VOLT
PART OF 6V-0885 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT FOR @@@@@ 7T-8854@@@@@
AN ATTACHMENT

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	318-2082	[1]	SOLENOID AS-STARTING MOTOR (24-VOLT)
2.	4M-1815	[1]	SPRING-CONTACT
3.	6V-8373	[3]	SCREW-MACHINE (6-32X0.187-IN)
4.	7T-9123	[1]	GASKET-PLATE
5.	045-4065	[4]	SCREW-MACHINE (10-32X0.75-IN)
	4B-4274	[8]	WASHER (5.5X13X1.2-MM THK)
	4B-2049	[4]	NUT (10-32-THD)
6.	6T-1120	[1]	BUSHING-TERMINAL
7.	6T-1119	[1]	TERMINAL AS
8.	8T-0328	[3]	WASHER-HARD (5.5X10X1-MM THK)
	8F-1434	[2]	LOCKWASHER
	6V-8188	[3]	NUT (1/2-13-THD)
9.	4B-2049	[3]	NUT (10-32-THD)
	7X-0562	[3]	WASHER-HARD (13.5X19X0.8-MM THK)
10.	6T-0362	[1]	INSULATOR

3T-5051: SOLENOID AS-STARTING MOTOR

SOLENOID AS-STARTING MOTOR

3T-5051 SOLENOID AS-STARTING MOTOR
32 VOLT
PART OF 3T-8943, 3T-8948 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9G-6770	[1]	CONTACT AS
2.	4M-1815	[1]	SPRING-CONTACT
3.	4M-5274	[3]	SCREW-MACHINE (TRUSS HEAD)
4.	7T-9123 C	[1]	GASKET-PLATE
5.	045-4065	[4]	SCREW-MACHINE (10-32X0.75-IN)
	4B-4274	[8]	WASHER (5.5X13X1.2-MM THK)
	4B-2049	[4]	NUT (10-32-THD)
6.	6T-1120	[1]	BUSHING-TERMINAL
7.	6T-1124 C	[1]	TERMINAL AS
8.	3H-3680	[3]	NUT-JAM (1/2-13-THD)
	4B-4280	[3]	WASHER (13.5X27X2.5-MM THK)
	9F-4976	[2]	LOCKWASHER
9.	4B-2049	[3]	NUT (10-32-THD)
	4B-4274	[3]	WASHER (5.5X13X1.2-MM THK)
	3B-4502	[2]	LOCKWASHER
10.	6T-0362	[1]	INSULATOR
	C		CHANGE FROM PREVIOUS TYPE

3T-8635: SOLENOID AS-STARTING MOTOR

SOLENOID AS-STARTING MOTOR

3T-8635 SOLENOID AS-STARTING MOTOR
24 VOLT
PART OF 6T-0640, 7G-7906 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9M-7657	[4]	NUT-SEALING
2.	8S-8023	[1]	COVER AS
3.	8S-8024	[1]	GASKET-COVER
4.	3T-3370	[1]	CORE AS (SOLENOID)
5.	8S-1528	[1]	BOOT

			AVAILABLE REPAIR KIT(S):
	9S-8688	[1]	KIT-CONTACT END CORE (STARTING MOTOR SOLENOID)
			(INCLUDES NUTS, CONTACT ASSEMBLY, RING, SPRING, WASHERS & RETAINER
	6T-3701	[1]	KIT-TERMINAL (STARTING MOTOR SOLENOID)
			(INCLUDES SPACERS, TERMINAL, INSULATION, STUDS, LOCKWASHERS, NUTS & WASHERS)
	8S-1527	[1]	KIT-YOKE END CORE (STARTING MOTOR SOLENOID)
			(INCLUDES WASHER, RETAINERS, SNAP RING, SPRING & BOOT

7T-8854: SOLENOID AS-STARTING MOTOR

SOLENOID AS-STARTING MOTOR

7T-8854 SOLENOID AS-STARTING MOTOR
24-VOLT
PART OF 3T-8953, 3T-8955, 3T-8967, 6T-0647 STARTING MOTOR GP-ELECTRIC
OPTIONAL FIELD REPLACEMENT ORDER @@@@@ 3T-4704@@@@@
AN ATTACHMENT

Parts for your 3408 ENGINE - MACHINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4M-1815	[1]	SPRING-CONTACT
2.	6V-8373	[3]	SCREW-MACHINE (6-32X0.187-IN)
3.	6T-1120	[1]	BUSHING-TERMINAL
4.	9G-6770	[1]	CONTACT AS
	318-2082	[1]	SOLENOID AS-STARTING MOTOR (24-VOLT)
	3R-8801	[1]	CLAMP
5.	6T-1124	[1]	TERMINAL AS
	3B-4502	[2]	LOCKWASHER
	3H-3680	[3]	NUT-JAM (1/2-13-THD)
	4B-2049	[3]	NUT (10-32-THD)
	4B-4274	[3]	WASHER (5.5X13X1.2-MM THK)
	4B-4280	[3]	WASHER (13.5X27X2.5-MM THK)
	6T-0362	[1]	INSULATOR
	9F-4976	[2]	LOCKWASHER
6.	4B-2049	[4]	NUT (10-32-THD)
7.	4B-4274	[8]	WASHER (5.5X13X1.2-MM THK)
8.	045-4065	[4]	SCREW-MACHINE (10-32X0.75-IN)
9.	7T-9123	[1]	GASKET-PLATE

Information:

ELECTRICAL AND STARTING SYSTEM

SHUTOFF GP

Engine News

Plunger Movement Must Be Adjusted When New Rack Shut-Off Solenoid Is Installed
1980/02/27

New Time Delay Conversion Groups Available
1982/08/25

Mechanical Shutoff Groups Changed To Prevent Vibration Of Oil Line Tubes
1982/11/10

New Rack Shutoff Solenoid Available
1983/03/16

New Fuel Shutoff Solenoid Assembly Used
1988/11/01

Improved Governor Servo Components Available For Use With Energize To Run Solenoids; Energize To Run Solenoid Stop Bolt Adjustment Procedure{1264,1259}
1996/06/12

New Fuel Shutoff Solenoids Provide Longer Service Life {7418}
1999/11/01

Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13

Special Instruction

Installation Of 2N2384 And 2N2385 Solenoids{1259, 1400}
Installation Of 2N2384 And 2N2385 Solenoids{1259, 1400}

Installation Of A 2W6384 Or 2W6386 Time Delay Relay Conversion Group For Industrial, Marine And Generator Set Engines{1300, 1400, 1450}
Installation Of A 2W6384 Or 2W6386 Time Delay Relay Conversion Group For Industrial, Marine And Generator Set Engines{1300, 1400, 1450}

Service Letter-NACD

The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group

Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines

Service Letter-Australia

The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group

Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines

Service Letter-CFEL

The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group

Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines

Service Letter-CSARL

The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group

Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines

Service Letter-Americas

The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group

Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines

Service Letter-Brazil

The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group

Service Letter-Truck/Ag/Marine

Specifications

Oil Pressure And Water Temperature Shutoff Assembly
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS

Air Shutoff Group
3408 & 3408B INDUSTRIAL & MARINE ENGINE ATTACHMENTS

Service Letter-China

The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group

Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines

Service Letter-Asia

The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group

Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines

Service Letter-APD

The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group
The Governor Needs To Be Updated On Certain 3408 Generator Set, 3408 Industrial, And 3412 Generator Set Engines Equipped With a 3% Regulation Hydromechanical Governor And An Energized-To-Run Shut-Off Solenoid Group

Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines
Product Support Program For The Calibration Of The Electronic Speed Switches On Certain 3406, 3408 And 3412 Industrial And Generator Set Engines

Disassembly and Assembly

Fuel Shutoff Solenoid
3408C & 3412C INDUSTRIAL ENGINES

Service Magazine

Plunger Movement Must Be Adjusted When New Rack Shut-Off Solenoid Is Installed{1259}
1980/02/25

New Dual Speed Switch Is Now Available{7418,7410,7411,1400}
1981/09/21

New Time Delay Conversion Groups Available{7400}
1982/08/23

Mechanical Shutoff Groups Changed To Prevent Vibration Of Oil Line Tubes{7418}
1982/11/08

Improved Mounting Assembly For Speed Switch Contactor Group{7418}
1983/01/17

New Rack Shutoff Solenoid Available{1257,1259}
1983/02/28

Improved Governor Control Shaft And Seal Will Help Prevent Oil Leakage{1265}
1983/07/04

Three Element Speed Switch Replaces Dual Element Speed Switch{7418,7411,7410,7421}
1986/04/21

Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05

Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08

New Fuel Shutoff Solenoid Assembly Used{1259}
1988/10/31

To Prevent A Possible Change In The Fuel Rack Setting, A Specific Assembly Procedure Must Be Used To Tighten The Bolt On The Governor Stop Collar{1259,1257,1250}
1979/07/02

Improved Governor Servo Components Available For Use With Energize To Run Solenoids; Energize To Run Solenoid Stop Bolt Adjustment Procedure{1264,1259}
1996/06/03

Caterpillar Parts SIS Catalog 3408 :

Truck sale:

45,000

Caterpillar 3408 IND, Construction
- Industrial engines
LOUISIANA CAT POWER SYSTEMS