AIR INLET AND EXHAUST SYSTEM
AIR CLEANER GPTURBOCHARGER GP
AIR INLET AND EXHAUST SYSTEM
AIR CLEANER GP#SEBP15310140
8N-4150: AIR CLEANER GP
8N-4150 AIR CLEANER GP
S/N 1HB567-682; 1LB641-99999; 7CB94-168
PART OF 9Y-0293 AIR CLEANER GP
S/N 1HB567-682; 1LB641-99999; 7CB94-168
PART OF 9Y-0293 AIR CLEANER GP
#SEBP15310141
9Y-0293: AIR CLEANER GP
9Y-0293 AIR CLEANER GP
S/N 1HB401-401; 1HB404-404; 1HB406-406; 1HB408-409; 1HB411-566; 1LB641-99999; 7CB83-93
PART OF 1W-3230 INSTALLATION AR-ENGINE
S/N 1HB401-401; 1HB404-404; 1HB406-406; 1HB408-409; 1HB411-566; 1LB641-99999; 7CB83-93
PART OF 1W-3230 INSTALLATION AR-ENGINE
Parts for your 637E WHEEL SCRAPER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7S-6340 | [1] | PRESCREEN AS | |
| 2. | 2D-2285 | [1] | BOLT (3/8-16X1.75-IN) | |
| 1D-4717 | [1] | NUT (3/8-16-THD) | ||
| 3. | 9S-2378 | [1] | PIPE AS-INLET | |
| 4. | 7F-0192 | [1] | BOLT (3/8-16X2-IN) | |
| 1D-4717 | [1] | NUT (3/8-16-THD) | ||
| 5. | 6N-0476 | [1] | BODY AS-PRECLEANER | |
| 6. | 0S-1591 | [1] | BOLT (3/8-16X1.5-IN) | |
| 1D-4717 | [1] | NUT (3/8-16-THD) | ||
| 7. | 1P-9390 | [1] | GASKET-OUTLET | |
| 8. | 1T-0822 | [2] | BOLT-12 POINT HEAD (3/8-16X0.75-IN) | |
| 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 9. | 2K-4973 | [10] | LOCKNUT (3/8-16-THD) | |
| 10. | 7N-4048 | [1] | AIR CLEANER GP | |
| 1P-8481 | [1] | CUP AS-AIR CLEANER | ||
| 6N-7692 | [1] | GASKET | ||
| 7W-5313 | [1] | FILTER ELEMENT AS-AIR (PRIMARY)(OUTER) | ||
| 1P-8482 | [1] | FILTER ELEMENT AS-AIR (SECONDARY)(INNER) | ||
| 11. | 3S-4115 | [2] | BOLT AS |
#SEBP15310142
9Y-0293: AIR CLEANER GP
9Y-0293 AIR CLEANER GP
S/N 1HB567-682; 7CB94-168
PART OF 1W-3230, 7E-9721 INSTALLATION AR-ENGINE
S/N 1HB567-682; 7CB94-168
PART OF 1W-3230, 7E-9721 INSTALLATION AR-ENGINE
Parts for your 637E WHEEL SCRAPER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7S-6340 | [1] | PRESCREEN AS | |
| 2. | 2D-2285 | [1] | BOLT (3/8-16X1.75-IN) | |
| 1D-4717 | [1] | NUT (3/8-16-THD) | ||
| 3. | 9S-2378 | [1] | PIPE AS-INLET | |
| 4. | 7F-0192 | [1] | BOLT (3/8-16X2-IN) | |
| 1D-4717 | [1] | NUT (3/8-16-THD) | ||
| 5. | 6N-0476 | [1] | BODY AS-PRECLEANER | |
| 6. | 0S-1591 | [1] | BOLT (3/8-16X1.5-IN) | |
| 1D-4717 | [1] | NUT (3/8-16-THD) | ||
| 7. | 1P-9390 | [1] | GASKET-OUTLET | |
| 8. | 1T-0822 | [2] | BOLT-12 POINT HEAD (3/8-16X0.75-IN) | |
| 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
| 9. | 2K-4973 | [10] | LOCKNUT (3/8-16-THD) | |
| 10. | 8N-4150 Y | [1] | AIR CLEANER GP | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP15310143
9Y-0293: AIR CLEANER GP
9Y-0293 AIR CLEANER GP
S/N 1HB683-690; 7CB169-179
PART OF 7E-9721 INSTALLATION AR-ENGINE
S/N 1HB683-690; 7CB169-179
PART OF 7E-9721 INSTALLATION AR-ENGINE
Parts for your 637E WHEEL SCRAPER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7S-6340 | [1] | PRESCREEN AS | |
| 2. | 2D-2285 | [1] | BOLT (3/8-16X1.75-IN) | |
| 1D-4717 | [1] | NUT (3/8-16-THD) | ||
| 3. | 9S-2378 | [1] | PIPE AS-INLET | |
| 4. | 7F-0192 | [1] | BOLT (3/8-16X2-IN) | |
| 1D-4717 | [1] | NUT (3/8-16-THD) | ||
| 5. | 6N-0476 | [1] | BODY AS-PRECLEANER | |
| 6. | 0S-1591 | [1] | BOLT (3/8-16X1.5-IN) | |
| 1D-4717 | [1] | NUT (3/8-16-THD) | ||
| 7. | 1P-9390 | [1] | GASKET-OUTLET | |
| 8. | 8T-4896 C | [10] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 9. | 2K-4973 | [10] | LOCKNUT (3/8-16-THD) | |
| 10. | 6I-2594 C | [1] | AIR CLEANER GP | |
| 11. | 6I-2507 | [1] | FILTER ELEMENT AS-AIR (PRIMARY) | |
| 12. | 6I-2508 | [1] | FILTER ELEMENT AS-AIR (SECONDARY) | |
| 13. | 6N-6223 | [1] | CUP AS-AIR CLEANER | |
| 6N-7692 | [1] | GASKET | ||
| 14. | 6N-6460 | [2] | ROD AS | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP15310144
4W-7371: CARTRIDGE GP-TURBOCHARGER
4W-7371 CARTRIDGE GP-TURBOCHARGER
S/N 08Z29143-34240
PART OF 4W-6722 TURBOCHARGER GP
AN ATTACHMENT
S/N 08Z29143-34240
PART OF 4W-6722 TURBOCHARGER GP
AN ATTACHMENT
Parts for your 637E WHEEL SCRAPER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4W-7342 | [1] | NUT | |
| 2. | 4W-7350 | [1] | WHEEL-COMPRESSOR | |
| 3. | 4W-7348 | [1] | INSERT | |
| 4. | 5S-4546 | [1] | RING-RETAINING | |
| 5. | 9B-1722 L | [2] | SCREW (10-24X0.5-IN) | |
| 6. | 4W-7356 J | [1] | SEAL-O-RING | |
| 7. | 4W-7340 | [1] | HOUSING AS-BEARING | |
| 8. | 4W-7347 | [1] | BEARING AS | |
| 9. | 4W-7346 | [2] | RING-THRUST | |
| 10. | 4W-7354 JL | [1] | RING-SEAL | |
| 11. | 4W-7351 | [1] | WHEEL & SHAFT AS | |
| 12. | 4W-7344 L | [2] | KIT-BEARING | |
| 13. | 9M-8915 JL | [3] | RING-RETAINING | |
| 14. | 4W-7352 | [1] | SLEEVE-SPACER | |
| 15. | 4W-7345 | [1] | DEFLECTOR-OIL | |
| 16. | 4W-7349 | [1] | SLEEVE-FLINGER | |
| 17. | 4M-8013 J | [1] | RING-PISTON | |
| 18. | 4W-7357 BL | [1] | SHIM (0.012-CM THK) | |
| 4W-7358 B | [1] | SHIM (0.015-CM THK) | ||
| 4W-7359 B | [1] | SHIM (0.017-CM THK) | ||
| 4W-7360 B | [1] | SHIM (0.02-CM THK) | ||
| 4W-7361 B | [1] | SHIM (0.022-CM THK) | ||
| 4W-7362 BL | [1] | SHIM (0.076-MM THK) | ||
| 4W-7363 B | [1] | SHIM (0.025-CM THK) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 7W-4872 | [1] | KIT-CARTRIDGE | ||
| (INCLS PARTS MARKED J) | ||||
| 9Y-1669 C | [1] | KIT-TURBOCHARGER | ||
| (INCLS PARTS MARKED L) | ||||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| L | KIT MARKED L SERVICES PART(S) MARKED L AND INSERT | |||
#SEBP15310145
4W-7372: CARTRIDGE GP-TURBOCHARGER
4W-7372 CARTRIDGE GP-TURBOCHARGER
S/N 08Z27183-33293
PART OF 7W-1987 TURBOCHARGER GP
S/N 08Z27183-33293
PART OF 7W-1987 TURBOCHARGER GP
Parts for your 637E WHEEL SCRAPER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4W-7342 | [1] | NUT | |
| 2. | 4W-7350 | [1] | WHEEL-COMPRESSOR | |
| 3. | 4W-7362 BL | [1] | SHIM (0.076-MM THK) | |
| 4W-7357 BL | [1] | SHIM (0.012-CM THK) | ||
| 4W-7358 B | [1] | SHIM (0.015-CM THK) | ||
| 4W-7359 B | [1] | SHIM (0.017-CM THK) | ||
| 4W-7360 B | [1] | SHIM (0.02-CM THK) | ||
| 4W-7361 B | [1] | SHIM (0.022-CM THK) | ||
| 4W-7363 B | [1] | SHIM (0.025-CM THK) | ||
| 4. | 5S-4546 | [1] | RING-RETAINING | |
| 5. | 4W-7348 | [1] | INSERT | |
| 6. | 4W-7356 J | [1] | SEAL-O-RING | |
| 7. | 9B-1722 L | [2] | SCREW (10-24X0.5-IN) | |
| 8. | 4W-7347 | [1] | BEARING AS (THRUST) | |
| 9. | 4W-7352 | [1] | SLEEVE-SPACER | |
| 10. | 4W-7355 | [1] | PLATE-BACKING | |
| 11. | 4W-7351 | [1] | WHEEL & SHAFT AS | |
| 12. | 4W-7354 JL | [1] | RING-SEAL | |
| 13. | 4W-7344 L | [2] | KIT-BEARING | |
| 14. | 9M-8915 JL | [3] | RING-RETAINING | |
| 15. | 4W-7346 | [2] | RING-THRUST | |
| 16. | 4W-7345 | [1] | DEFLECTOR-OIL | |
| 17. | 4W-7343 | [1] | HOUSING AS-BEARING | |
| 18. | 4M-8013 JL | [1] | RING-PISTON | |
| 19. | 4W-7349 | [1] | SLEEVE-FLINGER | |
| AVAILABLE REPAIR KIT(S): | ||||
| 7W-4872 J | [1] | KIT-CARTRIDGE (TURBOCHARGER) | ||
| 9Y-1669 CL | KIT-TURBOCHARGER | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | KIT MARKED J INCLUDES PART(S) MARKED J | |||
| L | KIT MARKED L INCLUDES PART(S) MARKED L AND INSERT | |||
#SEBP15310146
7C-4213: CARTRIDGE GP-TURBOCHARGER
7C-4213 CARTRIDGE GP-TURBOCHARGER
S/N 08Z34241-99999
PART OF 7C-4204 TURBOCHARGER GP
AN ATTACHMENT
S/N 08Z34241-99999
PART OF 7C-4204 TURBOCHARGER GP
AN ATTACHMENT
Parts for your 637E WHEEL SCRAPER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4W-7342 | [1] | NUT | |
| 2. | 7W-8845 | [1] | WHEEL-COMPRESSOR | |
| 3. | 9Y-1134 CL | [1] | INSERT | |
| 4. | 5S-4546 | [1] | RING-RETAINING | |
| 5. | 9B-1722 L | [2] | SCREW (10-24X0.5-IN) | |
| 6. | 4W-7356 J | [1] | SEAL-O-RING | |
| 7. | 4W-7340 | [1] | HOUSING AS-BEARING | |
| 8. | 4W-7347 | [1] | BEARING AS | |
| 9. | 4W-7346 | [2] | RING-THRUST | |
| 10. | 4W-7354 JL | [1] | RING-SEAL | |
| 11. | 7W-8844 | [1] | WHEEL & SHAFT AS | |
| 12. | 4W-7344 L | [2] | KIT-BEARING | |
| 13. | 9M-8915 JL | [3] | RING-RETAINING | |
| 14. | 4W-7352 | [1] | SLEEVE-SPACER | |
| 15. | 4W-7345 | [1] | DEFLECTOR-OIL | |
| 16. | 4W-7349 | [1] | SLEEVE-FLINGER | |
| 17. | 4M-8013 J | [1] | RING-PISTON | |
| 18. | 4W-7357 BL | [1] | SHIM (0.012-CM THK) | |
| 4W-7358 B | [1] | SHIM (0.015-CM THK) | ||
| 4W-7359 B | [1] | SHIM (0.017-CM THK) | ||
| 4W-7360 B | [1] | SHIM (0.02-CM THK) | ||
| 4W-7361 B | [1] | SHIM (0.022-CM THK) | ||
| 4W-7362 BL | [1] | SHIM (0.076-MM THK) | ||
| 4W-7363 B | [1] | SHIM (0.025-CM THK) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 7W-4872 | [1] | KIT-CARTRIDGE (INCLUDES PARTS MARKED J) | ||
| 9Y-1669 C | [1] | KIT-TURBOCHARGER (INCLUDES PARTS MARKED L) | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | ||||
| L | ||||
#SEBP15310147
7C-7598: CARTRIDGE GP-TURBOCHARGER
7C-7598 CARTRIDGE GP-TURBOCHARGER
S/N 08Z39170-99999
PART OF 7C-7580 TURBOCHARGER GP
S/N 08Z39170-99999
PART OF 7C-7580 TURBOCHARGER GP
Parts for your 637E WHEEL SCRAPER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4W-7354 | [1] | RING-SEAL | |
| 2. | 4W-7342 | [1] | NUT | |
| 3. | 5S-4546 | [1] | RING-RETAINING | |
| 4. | 5S-4556 | [1] | INSERT | |
| 5. | 4P-9808 | [1] | SEAL-O-RING | |
| 6. | 4M-8013 | [1] | RING-PISTON | |
| 7. | 4W-7349 | [1] | SLEEVE-FLINGER | |
| 8. | 4W-7346 | [2] | RING-THRUST | |
| 9. | 209-2201 | [1] | BEARING-THRUST | |
| 10. | 5S-4549 | [1] | DEFLECTOR-OIL | |
| 11. | 209-2202 | [2] | BEARING-JOURNAL | |
| 12. | 511-5792 | [4] | RING-RETAINING | |
| 13. | 514-5960 | [1] | WASHER |
#SEBP15310148
7C-7599: CARTRIDGE GP-TURBOCHARGER
7C-7599 CARTRIDGE GP-TURBOCHARGER
S/N 08Z34241-99999
PART OF 7C-7577 TURBOCHARGER GP
AN ATTACHMENT
S/N 08Z34241-99999
PART OF 7C-7577 TURBOCHARGER GP
AN ATTACHMENT
Parts for your 637E WHEEL SCRAPER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4W-7342 | [1] | NUT | |
| 2. | 7W-8845 | [1] | WHEEL-COMPRESSOR | |
| 3. | 4M-8013 | [1] | RING-PISTON | |
| 4. | 5S-4546 | [2] | RING-RETAINING | |
| 5. | 4W-7349 | [1] | SLEEVE-FLINGER | |
| 6. | 5P-5757 | [1] | SEAL-O-RING | |
| 7. | 7C-7612 | [1] | HOUSING AS-BEARING | |
| 8. | 4N-7597 | [1] | BEARING AS | |
| 9. | 4W-7346 | [2] | RING-THRUST | |
| 10. | 4W-7354 | [1] | RING-SEAL | |
| 11. | 7W-8844 | [1] | WHEEL & SHAFT AS | |
| 12. | 4W-7344 | [2] | KIT-BEARING | |
| 13. | 9M-8915 | [4] | RING-RETAINING | |
| 14. | 4W-7352 | [1] | SLEEVE-SPACER | |
| 15. | 5S-4549 | [1] | DEFLECTOR-OIL |
#SEBP15310149
7W-8841: CARTRIDGE GP-TURBOCHARGER
7W-8841 CARTRIDGE GP-TURBOCHARGER
S/N 08Z33294-39169
PART OF 7W-9446 TURBOCHARGER GP
S/N 08Z33294-39169
PART OF 7W-9446 TURBOCHARGER GP
Parts for your 637E WHEEL SCRAPER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4W-7342 | [1] | NUT | |
| 2. | 7W-8845 | [1] | WHEEL-COMPRESSOR | |
| 3. | 4W-7362 BL | [1] | SHIM (0.076-MM THK) | |
| 4W-7357 BL | [1] | SHIM (0.012-CM THK) | ||
| 4W-7358 B | [1] | SHIM (0.015-CM THK) | ||
| 4W-7359 B | [1] | SHIM (0.017-CM THK) | ||
| 4W-7360 B | [1] | SHIM (0.02-CM THK) | ||
| 4W-7361 B | [1] | SHIM (0.022-CM THK) | ||
| 4W-7363 B | [1] | SHIM (0.025-CM THK) | ||
| 4. | 5S-4546 | [1] | RING-RETAINING | |
| 5. | 9Y-1134 CL | [1] | INSERT | |
| 6. | 4W-7356 J | [1] | SEAL-O-RING | |
| 7. | 9B-1722 L | [2] | SCREW (10-24X0.5-IN) | |
| 8. | 4W-7347 | [1] | BEARING AS (THRUST) | |
| 9. | 4W-7352 | [1] | SLEEVE-SPACER | |
| 10. | 4W-7355 | [1] | PLATE-BACKING | |
| 11. | 7W-8844 | [1] | WHEEL & SHAFT AS | |
| 12. | 4W-7354 JL | [1] | RING-SEAL | |
| 13. | 4W-7344 L | [2] | KIT-BEARING | |
| 14. | 9M-8915 JL | [3] | RING-RETAINING | |
| 15. | 4W-7346 | [2] | RING-THRUST | |
| 16. | 4W-7345 | [1] | DEFLECTOR-OIL | |
| 17. | 4W-7343 | [1] | HOUSING AS-BEARING | |
| 18. | 4M-8013 JL | [1] | RING-PISTON | |
| 19. | 4W-7349 | [1] | SLEEVE-FLINGER | |
| AVAILABLE REPAIR KIT(S): | ||||
| 7W-4872 | [1] | KIT-CARTRIDGE (TURBOCHARGER) | ||
| 9Y-1669 C | [1] | KIT-TURBOCHARGER (CARTRIDGE) | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | KIT MARKED J INCLUDES PART(S) MARKED J | |||
| L | KIT MARKED L INCLUDES PART(S) MARKED L | |||
Information:
AIR INLET AND EXHAUST SYSTEM
AIR CLEANER GP
Special Instruction
Instructions for Installation of Turbine Precleaners on Products with Dust Ejectors {1055}
Instructions for Installation of Turbine Precleaners on Products with Dust Ejectors {1055}
Instructions for Installation of Turbine Precleaners on Products with Dust Ejectors {1055}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Reuse And Salvage Guidelines


